OSKAR SERIES|Sink Mixer
COLLECTION 24
OSKAR SERIES
PLUMBED COLLECTION
Oskar Basin Mixer
Finish Eletroplated /PVD Coating Finger Print Free
High-Quality Finish
Ceramic Cartridge 25mm
Pressure Rating 100 - 500kPa
Temperature Rating 1-75 dec C
Wels Rating 6 STAR, 4.5 L/MIN
Wels REG NO. T42534
Colour Available: 5 Colours
TP-OBMB Matte Black RRP 249
TP-OBMBN Brushed Nickel RRP 299
TP-OBMGM Gun Metal RRP 299
TP-OBMAG Argent Gold RRP 299
TP-OBM Chrome RRP 238
Oskar
Tall Basin Mixer
Finish Eletroplated /PVD Coating Finger Print Free
High-Quality Finish
Ceramic Cartridge 25mm
Pressure Rating 100 - 500kPa
Temperature Rating 1-75 dec C
Wels Rating 6 STAR, 4.5 L/MIN
Wels REG NO. T42535
Colour Available: 5 Colours
TP-OTBM Chrome RRP 299
Brushed Nickel RRP 396
Matte Black RRP $339
TAPWARE
TP-OTBMGM Gun Metal RRP 396
Argent Gold RRP 396
TP-OTBMBN
TP-OTBMAG
TP-OTBMB
Wall Basin Mixer
Finish Eletroplated /PVD Coating Finger Print Free
High-Quality Finish
Ceramic Cartridge 25mm
Pressure Rating 100 - 500kPa
Temperature Rating 1-75 dec C
Wels Rating 6 STAR, 4.5 L/MIN
Wels REG NO. T42536
Colour Available: 5 Colours
TP-OWBM Chrome RRP 335
TP-TP-OWBMBN Brushed Nickel RRP 396
TP-OWBMB Matte Black RRP $356
TAPWARE
TP-OWBMGM Gun Metal RRP 396
TP-OWBMAG Argent Gold RRP 396
Oskar Shower Mixer
Finish Eletroplated /PVD Coating Finger Print Free
High-Quality Finish
Ceramic Cartridge 35mm
Pressure Rating 100 - 500kPa
Temperature Rating 1-75 dec C
Colour Available: 5 Colours
TP-OSM Chrome RRP 159
Brushed Nickel RRP 198
TP-OSMB Matte Black RRP $179
Argent Gold RRP 198
TAPWARE
TP-OSMGM Gun Metal RRP 198
TP-OSMBN
TP-OSMAG
Oskar Shower Mixer
With Diverter TAPWARE
Finish Eletroplated /PVD Coating Finger Print Free
High-Quality Finish
Ceramic Cartridge 35mm
Pressure Rating 100 - 500kPa
Temperature Rating 1-75 dec C
Colour Available: 5 Colours
TP-ODSMBN Brushed Nickel RRP 299
TP-ODSMAG Argent Gold RRP 299
TP-ODSMB Matte Black RRP $279
TP-ODSMGM Gun Metal RRP 299
TP-ODSM Chrome RRP 259
Oskar Bath Spout
Finish Eletroplated /PVD Coating Finger Print Free
High-Quality Finish
Colour Available: 5 Colours
TP-OBSBN Brushed Nickel RRP 158
TP-OBSAG Argent Gold RRP 158
TP-OBS Chrome RRP 132
TP-OBSB Matte Black RRP $145
TP-OBSGM Gun Metal RRP 158
Oskar Pull out Kitchen Mixer TAPWARE
Finish Eletroplated /PVD Coating Finger Print Free
High-Quality Finish
Ceramic Cartridge 35mm
Pressure Rating 100 - 500kPa
Temperature Rating 1-75 dec C
Wels Rating 5 STAR, 6 L/MIN
Wels REG NO. T42537
Colour Available: 5 Colours
TP-OKM Chrome RRP 339
Brushed Nickel RRP 475
Matte Black RRP $396
Argent Gold RRP 475
Gun Metal RRP 475
TP-OKMBN
TP-OTBMAG
TP-OKMB
TP-OKMGM
TP-OKMAG
WARRANTY
NOTE: Unless otherwise specified, warranties for Otti Australia products are as follows.:-
Attica Tapware
15 Years ceramic disc cartridges
5 Years replacement product and parts
7 Years - Colour - Chrome
3 Years - Colour - All other colours
All Products Parts And Labour - 12 Months
Disclaimer:
Please note that we continuously strive to improve our products. As part of this ongoing process, there may be changes to the specifications of our products between different stages. We highly recommend purchasing a sample unit to ensure that the specifications meet your exact requirements. Thank you for your understanding and support as we work to provide you with the best possible products.
This warranty only applies to defects which have arisen solely from faulty materials or workmanship in the Products.
Our products come with guarantees that cannot be excluded under the Australian Consumer Law. A replacement or refund will be offered for any major failure, upon inspection by an authorised representative where a product is found to be defective in construction, material or assembly.
Goods maybe repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The warranty does not apply to other defects which may have arisen as a result of, without limitation, the following:
accidental damage, abnormal stress or strain, harsh or adverse weather conditions, abuse, misuse, mistreatment including excessive water pressure, temperature, or neglect of any kind of the products.
Alterations and repairs of the Products other than by an accredited and licensed service agent or technician are not covered.
CONDITIONS
1. Items must be installed by a licensed tradesperson.
2. Failure is due to a fault in the manufacture of the product.
3. Proof of purchase is provided.
4. The installation of the product is in accordance with the instructions provided.
EXCLUSIONS
To the fullest extent permitted by law, the manufacturer excludes all liability for damage or injury to any person, damage to any property and any indirect consequential or other loss or damage. Manufacturer will not be liable for the cost of installation or removal of any unit and the warranty will be VOIDED if damage occurred during or after INSTALLATION or a damaged or incorrect unit has been installed. Door and drawer adjustment; Unsuitable or improper use; Incorrect installation or installation not in accordance with the instructions provided; Installation or part installation by the purchaser or any person other than a LICENSED tradesperson; Normal wear and tear; Inadequate or complete lack of maintenance; water damage; chemical, electrochemical or electrical influences; excessive heat damage or Harsh detergents or abrasive cleaners used on product finishes, are NOT considered a warranty issue.
To Make a claim:-
For all warranty queries customers are to contact the branch where the product was purchased. These details can be found on your purchase invoice. Please provide them with photos or/video or issue if applicable, to illustrate issue clearly.
Please proivde:-
1. Name/Model No of product
2. Batch number of the product
3. Proof of installation (by licensed plumber/electrian)
2. Photo/Video of the issue
3. Contact name, number and address
Login to our website portal and entry you details into the Customer Warranty Request Form. https://www.ottiaustralia.com.au/page/5/warranty
SERVICE CALL OUT FEES & CHARGES
In the event of a call out for issues covered under the OTTI manufacturer warranty, no call out fees apply. If Otti Australia is called out and the cause of the issue falls within the warranty exclusions or the installation instructions have not been adhered to, the following charges will apply:
- Call out fee: $200.00 initial cost, first 15 minutes included.
- Service time onsite: $30/ billed in 15 minute increments.
- Call out times: Business hours 9am - 5pm.
Note: Response time will depend on technician availability.
PRODUCT CARE AND MAINTANCE
Acrylic baths
Cleaning your bath
1. To preserve the polished surface, after use, clean with a soft cloth and warm soapy water to wash away any body oils or soap residue that forms a ring tide mark. Always add oils into a bath full of water. Never pour them into an empty bath.
2. As a weekly cleaner we recommend warm, soapy water.
Do not use powders, pastes, cream cleaners, thinners, window cleaning sprays or dry cleaning liquid, etc. 3. Stubborn marks or fine scratches may be polished out with Brasso.
4. With colour dyes in essentials oils and hair colours, first test that the colour won’t stain your bath. If it does, use Brasso to remove it.
Solid Surface Basins
Everydaycare cleaning of Otti Australia Solid Surface products, to remove dirt and grime that may build up on the surface, can be removed with a simple wipe using a damp soapy sponge or cloth, followed by a rinse.
Do not use harsh chemical products such as acetone or strong acids which will stain the surface of the product and should not be used. Never pour essential oils directly into an empty bath or basin, always add to the water.
To remove stains always start with the cleaning method recommended under ‘Everyday Care’ first. If the stain is still visible, clean using a damp sponge or cloth and a mild abrasive cream or paste cleanser (e.g. Jif® or Gumption®) using a light, wide, circular motion. Then rinse. Lightly wipe the surface using a wide circular motion. Take care to rinse the surface thoroughly. This cleaning method should remove most stains.
Vanities, Tall Boy and Shaving Cabinets
Everydaycare cleaning of Otti Australia cabinets products, to remove dust or dirt that may build up on the surface, can be removed with a simple wipe using a damp soapy sponge or cloth.
LED Mirrors and Mirrors
Everydaycare cleaning of Otti Australia mirror products, to remove dust or dirt that may build up on the surface, can be removed with a simple wipe using a slightly damp sponge or cloth. Ensure water does not get into any electrical points.
Kitchen Sinks
Use dish washing liquid and water and no abrasive cleaners or cleaning cloths. Weekly cleaning with warm soapy water and a microfibre cloth is recommended. Dry after each use to reduce watermarking and surface rust. When cleaning, wipe in the direction of the brushed grain to maintain the brushed appearance. Do not use harsh chemicals or abrasive cleaners.
www.ottiaustralia.com.au
Available from all leading bathroom retail stores, Go to www.ottiaustralia.com.au/stockists to find a stockist near you. Due to limitations in the printing process, the colours in this catalogue are guide only. All measurements within this catalogue are nominal and are subject to change. Specifications correct at the time of printing 08/2024. Please visit www.ottiaustralia.com.au for the most current technical information.