ING H T Y R E V E R O F C S O SHOP
Reliance Products
OUR T OUS VOS MAGAS INEZ À OSC P
Produits Reliance
’S CANADA OCKED LLY ST ONLY FURIBUTOR! DIST EUR
T DISTRIBU É LE SEUL VISIONN O T APPR N E M E R ENTIÈ DA! AU CANA
ASSURE PLUS* Assure Plus All Surface Bonding Resin will increase adhesion to normal, atypical, dry or slightly contaminated enamel AND NOW ZIRCONIA AND ACRYLIC TEMPS WITHOUT ADDITIONAL PRIMERS. This universal bonding agent bonds to metal restorations AND NOW PORCELAIN without hydrofluoric acid. No drying or light curing required and can be used with any light or chemical cure system. Also available: Unidose Assure Plus. La résine liante pour toutes les surfaces Assure Plus améliorera l’adhésion à l’émail normal, atypique, sec ou légèrement contaminé ET MAINTENANT AUSSI AU ZIRCONE À L’ACRYLIQUE SANS L’AJOUT D’UNE COUCHE PRIMAIRE. Cet agent liant universel se colle aux restaurations métalliques ET MAINTENANT À LA PORCELAINE sans acide fluorhydrique. Aucun séchage ou durcissement n’est nécessaire et le produit peut être utilisé avec tous les systèmes de durcissement chimique ou léger. Aussi en vente : doses uniques Assure Plus.
C10-455P
ASSURE*
(Universal Bonding Resin) Reliance Assure (Universal Bonding Resin) will increase adhesion to normal, atypical, dry or slightly contaminated enamel. La gamme Assure de Reliance (résine liante universelle) améliorera l’adhésion à l’émail normal, atypique, sec ou légèrement contaminé.
C10-455
*Reliance is recommending the Assure Family as a replacement for the Enhance Line. *Reliance recommandela famille Assure pour remplacer la gamme Enhance.
ORTHO FLEXTECH
(STANLESS STEEL & WHITE GOLD)
MOLDED BASE AND CHAIN EXTRUSION SYSTEM C10-903 Pad C10-904 Oval
C10-830SS
This disposable attachment is used for extrusion of teeth. Unparalleled Strength Painless Removal
C10-830
Cette attache jetable est utilisée pour l’extrusion des dents. Force inégalée Retrait sans douleur
WWW.ORTHOSUPPLY.CA | TF: 1 800.387.7411
OthoFlex is intended to be used for retaining tooth position after orthodontic treatment. Lays flat against the teeth. Also available: etched or nickel free
(ACIER INOXYDABLE ET OR BLANC) OthoFlex sert à fixer la position de la dent après le traitement orthodontique. Il est fixé à plat contre les dents. Aussi en vente : gravé ou sans nickel
| T: 506.462.0308 | F: 1 877.387.7422
R O T U IB R T IS D N IA D A N YOUR CA UCTS D O R P E C N IA L E R L L A R FO
ING H T R Y E V R E O F S C O TOUS VOS SHOP R U O P C S O À Z E IN S MAGA
Reliance Products
NG AVAILABLEC BULK PRICI POUR LA COMMANDE EN VRA
GOTOTM
PRIX DISPONIBLES
C10-491
C10-490
Produits Reliance
NG AVAILABLEC BULK PRICI POUR LA COMMANDE EN VRA
FLOWTAIN & FLOWTAIN L.V.
PRIX DISPONIBLES
GoTo is a Light Cure Adhesive with superior handling properties. It does not allow bracket flotation once placed on the tooth or during flash removal.
C10-440
Flow TainMC et Flow TainMC LV sont des résines composites photopolymérisables fluides. Ces matériaux sont très lisses après la photopolymérisation, ce qui réduit l’usure et améliore le confort du patient.
En créant un pontique directement dans votre matériel d’alignement en thermoplastique transparent, vous ne risquez aucune craque ou fissure.
NG AVAILABLEC BULK PRICI POUR LA COMMANDE EN VRA
C10-463 Natural Shade Starter Pack (1 Bottle/1 Powder) C10-461 Blue Starter Pack (1 Blue Bottle/1 Poweder) C10-463 Trousse de départ – teinte naturelle (1 bouteille/1 poudre) C10-461 Trousse de départ – teinte bleue (1 bouteille bleue/1 poudre)
ULTRA BAND LOK BLUE
*also available in Tooth Tone aussi offert en couleur dent
C10-606
C10-501
Other suggested uses: Occlusal Build-Up Material Bond Large Acrylic Appliances (Hyrax, RPE, etc.) Pâte de ciment à photopolymérisation pour bague dégageant du fluorure (aucun mélange n’est requis). * Bulk pricing is available Autres usages suggérés : Matériel d’accroissement occlusal on syringes ONLY Collage de gros appareils en * Prix disponibles pour la commande en vrac UNIQUEMENT pour les seringues acrylique (hyrax, APR, etc.)
C10-500
Reliance Etchant is 37% phosphoric acid (H3PO4) polymer-thickened for use on enamel to prepare the surface for bonding.
C10-500 Liquide de mordançage – 9 g C10-501 Liquide de mordançage – taille économique 23 g C10-504 Seringues de liquide de mordançage – taille économique (1 seringue/20 embouts)
ORDER NOW » WWW.ORTHOSUPPLY.CA | TF: 1 800.387.7411 | T: 506.462.0308 | F: 1 877.387.7422 COMMANDEZ DÈS MAINTENANT
C10-430 C10-982
Un fil plat très mou à 8 filaments améliore grandement la rétention. La contention à l’intérieur de l’arc grâce à ce mince ruban préviendra les problèmes de contrôle de torque qui peuvent survenir lorsqu’on utilise un fil tressé rond pour ces procédures.
Single strand NICKEL FREE titanium flat metal ribbon with increased interproximal strength, is ideal for semi-permanent splinting and maintaining difficult extraction sites.
Un ruban plat simple en titane SANS NICKEL améliorera la force interproximale et est idéal pour la contention semi-permanente et pour maintenir des sites d’extraction compliqués.
A clear light cure paste that will bond any metal, plastic or ceramic button, hook or power arm to any thermoplastic aligner material, regardless of manufacturer. C10-700
C10-504
LCR is a flowable, light cure C10-428 orthodontic adhesive intended to be used within an orthodontic or dental office for the bonding of lingual retainers, creation of occlusal buildups and for retention of thermoplastic aligners.
Le LCR est un adhésif orthodontique fluide photopolymérisant conçu pour être utilisé dans les bureaux orthodontiques ou dentaires pour le collage de fils de rétention linguaux, la création de l’accroissement occlusal et la rétention. tempor incididunt ut labore.
PRO SEAL& LED PRO SEAL
C10-520LD C10-520
C10-911
C10-912
C10-914
C10-913
C10-909
APPELEZ-NOUS POUR CONNAÎTRE NOS PRIX DE COMMANDE EN VRAC.
Le PRO SEAL est la première résine de scellement capable de sécher entièrement sans l’ajout d’une couche d’inhibition par l’oxygène. La résine crée une surface dure et lisse qui protège l’émail.
Works with any light cure adhesive regardless of manufacture. Mixing well cover will keep unused solution fresh and protected from light for up to 6 hours.
Pâte photopolymérisante qui collera tous les boutons, crochets ou bras en métal, en plastique ou en céramique à tout matériel d’alignement en thermoplastique, peu importe le fabricant.
CALL US FOR BULK PRICING
PRO SEAL is the first sealant that will completely set without an oxygen inhibited layer. This creates a smooth hard surface that protects the enamel.
SELF ETCHING PRIMER
BOND ALIGNER®
L’agent de mordançage Reliance est épaissi à 37 % à l’aide d’un polymère d’acide phosphorique (H3PO4) et placé sur l’émail pour préparer la surface au collage. C10-500 Liquid Etch 9gm C10-501 Econo Liquid Etch 23gm C10-504 Econo Gel Etch Syringes (1 Syr/20 Tips)
LCR
C10-860 Retainuim .027x.011 (10/PK) C10-861 Retainuim XL .027x.016 (10/PK)
LIQUID & GEL ETCH
Fluoride releasing, single paste (no mixing) light cure band cement. C10-608
C10-860
*
PRIX DISPONIBLES
PRIX DISPONIBLES
RETAINIUM & RETAINIUM XL
Ciment de verre ionomère à polymérisation double pour bague. Poudre hydrophile/colle liquide.
C10-463
NG AVAILABLEC BULK PRICI POUR LA COMMANDE EN VRA
PRIX DISPONIBLES
C10-820
Dual Cure Glass Ionomer Band Cement. Hydrophilic Powder /Liquid Cement.
Create a pontic directly in your clear thermoplastic aligner material will not crack or splinter.
NG AVAILABLEC BULK PRICI POUR LA COMMANDE EN VRA
Permanent retention is greatly enhanced using a flattened, dead soft 8-braided wire. Intra-arch splinting with this thin ribbon arch prevents torque control problems that can occur using a round braided wire for these procedures.
GLASS Lok™
PERFECT-A-SMILE PONTIC PAINT
C10-8XX SERIES
BOND-A-BRAID
Flow Tain™ and Flow Tain™ LV are flowable light cured composites for the bonding of lingual retainers. These materials are very smooth when cured this will reduce wear and enhance patient comfort.
C10-441
GoTo est un adhésif photo-polymérisant avec d’excellentes propriétés de manipulation. Il empêche la flottation des boîtiers une fois qu’il est placé sur la dent ou pendant le retrait de bavure.
NADIEN VOTRE DISTRIBUTEUR CA TS RELIANCE POUR TOUS LES PRODUI
ORDERS / CUSTOMER SERVICE COMMANDES / SERVICE À LA CLIENTÈLE
Fonctionne avec tous les adhésifs photopolymérisants, peu importe le fabricant. Le couvercle du godet de malaxage assurera la fraîcheur de la solution et la protégera de la lumière pour un maximum de 6 heures. C10-909 Slef Etching Primer Promo Kit C10-911 Slef Etching Primer Cartridge C10-912 Slef Etching Primer Percision Dispenser C10-913 Mixing Well C10-914 Micro Brushesvv (100/Pack)
C10-909 Trousse promotionnelle de couche primaire réactive C10-911 Cartouche de couche primaire réactive C10-912 Distributeur de précision de couche primaire réactive C10-913 Godet de malaxage C10-914 Microbrosses (100/paquet)
T 1 800.387.7411 EXT. 3/POSTE 3 sales@orthosupply.ca
1 YOUR CANADIAN NO. VO TRE PREMIER ER LI P P SU RELIANCE CHOIX EN MATIÈRE
DE PRODUITS RELIANCE
RENEW FINISHING SYSTEM
SYSTÈME DE FINITION RENEW
C10-531
C10-533 C10-534
RENEW FINISHING SYSTEM POINTS #383
RENEW DIAMOND BUR #129
The RENEW FINISHING SYSTEM POINTS #383 will remove small residual amounts of adhesive from the tooth surface and will polish the enamel without damage. Available in friction grip, straight handpiece or latch.
Le SYSTÈME D’EMBOUTS DE FINITION No 383 peut enlever les petites quantités résiduelles de la surface des dents et polir l’émail sans l’endommager. Disponible en serrage par friction, en pièce à main ou en pièce main à verrou. tempor incididunt ut labore.
A medium abrasion diamond bur recommended for roughening and preparing plastic, composite restorations and metal surfaces. C10-545
RENEW LINGUAL BUR #815
RENEW BUR #118S C10-530
The #118S is a special 18 fluted bur designed for controlled removal of bulk bonding adhesive after the brackets have been removed.
La No 118S est une fraise dentaire spéciale à 18 goujures conçue pour le retrait contrôlé d’adhésif dentaire en grande quantité après le retrait des boîtiers.
C10-546
RENEW BUR #118L
C10-529
ORDER! NOW
DEZ COMMAN ENANT! T DÈS MAIN
orthosupply.ca TF 1 800.387.7411
The #815 lingual composite bur with its friction grip, custom length and cutting head, make this the ideal carbide bur for lingual composite removal.
La fraise dentaire linguale composite No 815 avec serrage par friction, longueur personnalisée et tête de coupe est la fraise au carbure idéale pour le retrait de composite lingual.
RENEW BUR #218
The #118L is a longer shank version of the #118S with the same excellent adhesive removal properties.
La fraise No 118L est une version de la No 118S avec une plus longue tige et les mêmes excellentes propriétés de retrait d’adhésif.
Fraise dentaire en diamant de taille moyenne recommandée pour gratter et préparer du plastique, des restaurations composites et des surfaces métalliques.
C10-528
The #218 bur is an 18 fluted design that is tapered to reach into those tight areas along the gingival and occlusal when removing residual adhesive.
La fraise dentaire No 218 est une fraise tronconique à 18 goujures conçue pour atteindre les zones étroites gingivales et occlusales et retirer l’adhésif résiduel.
sales@orthosupply.ca T 506.462.0308