hello!
Hey there, pool builder!
If you’re tired of sifting through a mountain of conflicting and misleading information online about building that perfect pool, you're in the right place.
Here’s the truth bomb: you don’t need to spend countless hours stressing over what the best solution is for building it.
We’ve cracked the code and found THE solution that guarantees your pool won’t burst, rust, rot, crack or leak- Whilst saving you thousands - No matter your pool building experience.
Introducing the ClipBlox system from SolidPool – THE ultimate pool-building game-changer.
ClipBlox has revolutionised pool construction by combining cutting-edge technology with rocksolid reliability to give you peace of mind and a pool that lasts a lifetime.
This isn’t just another pool project; it’s a bullet-proof blueprint for success, designed to save you time, money, and headaches.
Why waste another minute on forums and blogs filled with half-baked advice and unverified tips?
Our system eliminates all the guesswork, providing you with a straightforward, step-by-step process that guarantees award winning results. Every. Single. Time
Ready to dive in?
Trust us – this is the only guide you'll ever need.
Warmly,
Ben and Oliver
Directors
Building a Swimming Pool is one of the greatest feelings you can experience as a homeowner not to mention it’s a fantastic sense of achievement for a pool builder. It’s why we’ve been doing it all these years. There is simply nothing else like it. That’s because when you build a pool you know it’s something special, it’s a one-of-a-kind project that reflects your aspirations.
However, there are many obstacles you must overcome before you can get there. Not only do you have to choose how to build the pool – but you also must make sure the pool wont Burst, Warp, Crack or Leak in the process, which can be the most difficult challenge of all. All of this can leave you falling well short of the mark and stop you from ever achieving that perfect pool project.
Fortunately, though, building a bullet proof swimming pool doesn’t have to be as challenging as you think. Far from it, in fact simply by implementing the right tried-and-tested techniques, you can build your pool without experiencing any of the common frustrations.
How would we know?
Because, at Orbro, we’re experts at helping our customers build their pools in the shortest possible timeframe.
Over the past 25 years, we’ve helped 150+ clients finally build their dream pools without the years of hard work and trial and error most people usually have to suffer through.
We’ve written this eBook to share some of the powerful industry secrets we’ve accumulated during our time in the pool industry.
The information you’re about to read will help you build your own pool while making sure you avoid misleading information. You’re about to discover:
● 11 Steps to incredible savings and pool building efficiency.
● How to avoid the 3 most common mistakes made by pool builders – 1 of these errors could cost you thousands of pounds and set you back months.
● The 6 simple steps to build your own pool
● 12 Non-negotiable questions you need all pool companies to answer
● The TRUTH about the pool industry and why prospective pool owners usually fail at achieving building their own pool
By the time you’ve finished reading, you’ll have all the information you need to kickstart your journey to success and be confident in completing your own award-winning standard pool project. All while saving a pool full of cash. Let's get
11 Pool Builders' secrets that will you save you thousands.
#1 Guaranteed Not to Burst
Pool builders, here’s the cold, hard truth:
When traditional shutters fail under the immense weight of wet concrete, it can lead to catastrophic. consequences:
Concrete spilling everywhere, structures collapsing, and hours of hard work undone in an instant.
One wrong move, a weak mortar mix, a bolt not tight enough or not enough screws or supports, and you’re looking at structural failures, wasted materials, and endless headaches.
This kind of failure can cause severe delays, skyrocketing costs, and a nightmare of clean-up and repair costing thousands of pounds to rectify.
Why build with ClipBlox?
You eliminate all those fears. Our permanent shuttering system is GUARANTEED not to burst.
Don’t let their lightweight design fool you; these blocks handle immense pressure per square inch.
You won't find a RISK warning in our literature
This means you pour your concrete with zero stress, zero worry.
No more sleepless nights fretting over buckling shutters or catastrophic collapses.
Knowing that your project is protected from the chaos and calamity of bursting shutters.
Achieve professional-quality results and enjoy the proven reliability of ClipBlox trusted since 2002.
#2 A reinforced concrete shell. The strongest option available, period.
Pool builders, here is the brutal reality:
Building a swimming pool is a structural minefield. One slip- up, and your walls could crack, bow, or even collapse.
You’re haunted by fears of weak walls, costly repairs, and catastrophic failures. Materials like Wood , metal, and fiberglass are prone to rust, corrosion, and surface damage, leading to endless maintenance and costly repairs.
Why build with ClipBlox?
Those nightmares vanish. Our system comes with structural calculations, meets Eurocode 2 standards, and you don’t need to pay for a structural engineer to design it. Saving you yet more money – on average around £500–£1,500 depending on the complexity required.
You get rock-solid, reliable walls for any ground conditions without the stress, offering a durable, long-lasting solution that stands up to the elements, no risk of draining the pool and walls collapsing.
ClipBlox ensures your pool is built to last, giving you unmatched strength and peace of mind and extraordinary value for money.
#3 Cuts Your Build Time in Half:
Pool builders, brace yourselves:
Building a swimming pool is a race against time and nature. Imagine the frustration of delays, the fear of spiralling costs, and the anxiety of watching your dream project turn into a never-ending ordeal, Weeks turn into months, leaving you with a gaping hole in your garden exposed to the elements.
The risk of collapse looms large, and every day means hours of back-breaking labour.
Your dream project quickly becomes a nightmare of delays, disasters, and exhaustion.
Enter ClipBlox THE pool building game-changer.
Our system cuts stages of the build time by 50% compared to traditional methods saving you thousands in labour costs.
Imagine completing your pool in a fraction of the time, with minimal physical effort.
This isn’t just about speeding up construction; it’s about freeing up your time and resources.
#4 Render-Free Perfection:
Pool builders listen up: On a good day …..Rendering a pool is a nightmare.
Out of square, Rough block work or sprayed concrete shells means endless hours of making good, and if you don't have the skills, you’re either paying out for expensive sub-contractors or you're facing cracked render, failing tiles, and bulges in your pool liner. Even some pro renderers steer clear of pools for fear of failure…
You’ve heard the saying you can’t polish a turd!!!
One mistake, and your dream pool becomes a disaster.
The benefit of ClipBlox -
Clipblox is a revolutionary system that requires no render and leaves a completely smooth finish ready for tanking and tiling or lining straight away. This will save on average between £3 -5k for a standard pool shell.
Forget about the stress, the risk and the endless labour not to mention adding another few tons of material you’re needing to build your pool.
Imagine building your pool with zero rendering, zero cracking, and zero hassle for its entire lifespan.
Saving you time, money, and endless frustration.
THE SAVINGS ARE STARTING TO ADD UP NOW!!
#5 Simple Construction:
Pool builders: face the truth: Building a swimming pool no matter your level of experience is a significant task.
Traditional methods using blockwork or shutters require skills that are in short supply these days. With inexperienced team members every step feels like a potential disaster, leaving you stressed, overwhelmed, and worrying about cost overruns.
ClipBlox as simple to build as Lego®:. Our clip-together process can be taught to anyone in just 20 minutes, without compromising on the build quality that professionals achieve after years in the trade.
Even seasoned professionals admit this is the future., streamlining their work and achieving flawless results faster than ever before without paying an entire team of experienced multi skilled professionals.
Imagine constructing your pool with ease and confidence, regardless of your team's experience level.
ClipBlox ensures a high-quality, professional-grade build, making the process straightforward and stress-free. Every Single Time
#6 Weather-Proof Construction:
Pool builders, here's the brutal truth:
Building a swimming pool is a relentless war against the elements. Rain, wind, scorching sun, and unpredictable conditions can grind your project to a screeching halt, causing devastating delays, costly damage, and soul-crushing frustration.
Every storm is a merciless assault on your timeline and sanity. Every heatwave turns your worksite into an inferno, leaving you gasping for air and hydration.
Every down pour turns your garden into a scene from the battle of the Somme.
The elements will push you to your limits, testing your resolve and endurance. This isn’t just construction; it’s survival.
Why build with ClipBlox? –
The ClipBlox system can be built in all weathers. Rain or shine, it keeps your project on track.
Based on the national average its estimated that weather delays can translate to additional costs of £5,000 to £15,000 for extended labour, equipment hire, and other overheads. No more delays, no more stress, no more worrying about the forecast
Imagine building your pool without ever checking the weather report. It ensures your build is smooth, fast, and resilient, no matter what Mother Nature throws at you.
This isn’t just weatherproof it’s a money saving game-changer.
#7 Lightweight Construction:
let’s face it: Traditional pool construction is a physical nightmare.
It’s seriously heavy labour, back-breaking work and relentless physical strain.
You’re risking more than just your patience according to NHS Statistics over 30% of construction workers suffer from musculoskeletal disorders, primarily from lifting and handling heavy materials,
Your dream project can quickly become a painful battle with physical exhaustion and injury.
Enter ClipBlox a game-changer that weighs only 3.5kg per block. Say goodbye to the agony of heavy lifting.
Its lightweight design is easy on your body, drastically reducing physical strain and the risk of injury.
As a builder, you can avoid the physical strain and injury risks associated with traditional heavy materials.
It keeps you and your team healthy but also boosts your efficiency and speeds up your project.
Imagine building your pool with minimal effort, while avoiding the physical toll that plagues so many in the industry.
ClipBlox ensures a smoother, stress-free experience, allowing you to focus on creating your dream pool without risking your health.
#8 Access Issues:
Pool builders we’ve been there - Poor access can turn your simple pool project into a logistical nightmare or even halt it in its tracks.
Struggling with narrow gates, tight spaces, or no access for cranes and heavy machinery? Even just transporting the tonnage of material required by building with traditional methods is a challenge. Why build with ClipBlox?
Forget the hassle. ClipBlox’s lightweight design makes it easy to transport and assemble in hard-to-reach places, saving you from the expense and frustration of bulky machinery.
As a pool builder, you can confidently take on projects in any location without costly equipment or complicated logistics.
And here’s the game-changer:: The innovative design means thinner walls, taking up less room while maintaining unbeatable strength. Less materials in, less materials out.
Been told you need thick walls for durability? Think again. ClipBlox gives you more pool with less bulk.
ClipBlox is designed to fit your space, no matter how tight.
Imagine building your pool with ease, no matter where it is, and gaining extra space thanks to thinner walls. ClipBlox ensures your project moves forward smoothly, without the headache of access issues or costs of hours of work moving unnecessary bulk.
#9 Easy Cutting:
Pool builders, here’s the harsh reality: Traditional pool construction methods are dust-filled, precision nightmares. Cutting block work with grinders creates clouds of hazardous dust and leaves you with weak spots around fittings. Costing a ton of time and money
Coring out holes and trying to fill them up?
A recipe for disaster if you're not experienced. One wrong move, and your hard work turns into a crumbling mess. costing you thousands of pounds to remedy.
Why build with ClipBlox?
ClipBlox allows you to cut effortlessly, with no dust and no mess.
Forget about the health hazards, the weak spots, and the frustration. Your fittings are perfectly plumb, level, and spaced to perfection. Every detail is set at the right distance for finishes, ensuring a flawless final look. Every. Single. Time. This isn’t just easier it’s essential. For the pool builder who demands accuracy, safety, and perfection. Do it right the first time – build smarter not harder with ClipBlox
#10 Crack Free:
Worried about Cracks, Rust, and Warping? For a pool-builder, choosing the right pool construction system is critical.
Traditional shuttering or blockwork, fiberglass pools, and metal pools all come with their own set of problems.
Materials like metal and wood are prone to rust, corrosion, and chemical damage, Concrete blocks can shift and crack, sprayed concrete can be uneven and prone to leaks on day joints, and cheap fiberglass can result in scuffs, scratches and can warp or lift over time resulting in constant repairs and escalating costs, And the worst part? The ever-present risk of collapse when the pool is empty depending on special backfill just to keep the damn thing standing..
Imagine the stress and frustration of watching your investment deteriorate. These fears can paralyze you. Why build with ClipBlox?
ClipBlox slashes through the chaos of traditional methods with a self-supporting design that laughs in the face of immense pressure. No more structural failures, hidden costs, or endless maintenance. It’s engineered to be strong enough to be completely above ground.
No more relying on special backfill to prevent a catastrophe when the pool is empty.
Our system is engineered to be rust-free, warp-free, and crack-free. It’s built to endure, giving you the peace of mind you’ve been desperately seeking.
No more sleepless nights worrying about potential cracks, leaks or structural weaknesses and collapses. ClipBlox ensures your pool remains pristine and durable, providing unmatched durability and stability.
You won’t have to spend your weekends sanding down rust spots, repainting, or patching up corroded and damaged areas. ClipBlox’s superior durability saves you time, effort, and money, allowing you to focus on enjoying your pool rather than constantly fixing it for years to come.
Build it once. Build it right. Build with ClipBlox.
#11 Free Form Curves:
Pool builders, let’s get real:
Building a curved swimming pool or wall with traditional block work, timber or metal formwork is a nightmare. These rigid materials don’t bend unless you don’t want them to, making it nearly impossible to achieve smooth curves without a fight
You’re left with uneven surfaces, gaps, and the constant need to make good once the concrete is poured.
One misstep, and your dream pool looks like a botched job.
Enter ClipBlox the only flexible block on the market.
Our unique system bends into precise, smooth curves effortlessly.
Forget about the frustration and the endless adjustments and hours of time wasted costing you money.
With ClipBlox, your curves are perfect from the start, with no need for touch-ups once the concrete is filled
Imagine building your pool with flawless, elegant curves, without the struggle.
ClipBlox ensures every bend is seamless, saving you time and hassle, and delivering a stunning result.
6 Simple Steps To Help You Build a Perfect Pool
Chris Cook, Olympic swimmer and two-time Commonwealth gold medallist, has teamed up with ClipBlox, and we’re here to revolutionise the pool industry.
Chris wanted a pool for his swim school, and together, we created a simple 6-step process to build an award-winning pool.
This isn’t just any method; it’s the same strategy Chris used to win his gold medals.
By following these small steps, you achieve world-class results.
We broke down the pool installation into these steps, merging Chris’s knowledge of achieving peak performance with our pool construction expertise.
The result? Award-winning pools Every. Single. Time..
Other companies that have embraced our system have racked up accolades from SPATA Awards, UK Pool Awards, and Natural Pool Awards.
Following just these six simple steps may seem straightforward, but by tackling each section and understanding what’s involved and whether each action helps or hinders the step your pool project will become much easier, even without prior any experience and it’s ging to save you thousands of pounds.
Everything we do is explained so simply that a child could do it.
This is how we turn complexity into simplicity, ensuring your success – achieving the prestige without the price tag.
Chris Cook didn’t just team up with any pool system.
He sees ClipBlox as a game-changer, not just for pools but for solving walling problems worldwide.
Imagine building your pool with the precision and excellence of an Olympic champion.
Our 6-step process is designed to be fool-proof, delivering top-tier results without the usual headaches and complexities. This isn’t just easier it’s revolutionary.
For the self-builder who wants to achieve greatness and for the professional ready to embrace the future,
ClipBlox and Chris Cook’s method are the ONLY choice.
Say goodbye to outdated methods and hello to Olympic-level success in pool building.
Check out the 6 steps you need to think about……
6 SIMPLE steps!
Chris Cook
Simplify the process in these stages….
Plan your pool
Choose the best position for your new pool. Draw a detailed plan including dimensions and depths including pipe runs. Think about the sun position throughout the day and the areas around the pool.
Excavation
Excavate the ground for your new pool, include the depth for bases, pipe runs and drainage. Can the spoil stay on site and be re-used? saving you thousands of pounds that could go towards the filtration or cover .
The Pool Walls
Install a Clipblox shell: the result is a reinforced concrete pool shell using recycled blocks, constructed using a simple clip construction method that can be taught to you in just one day. A shell that has a 100% success rate in 33 countries.
Filtration and Heating
Installing the pipework, filtration and heating. Poor equipment will ruin your experience of owning a pool, using energy efficient heating and pumps and water treatment will reduce overall running costs.
The Finish
Installing the copings and internal finishes is what brings the pool to life, because you wouldn’t need to render the pool you can speed the install up. Make sure you get the colour of the pool water right for your settings.
Commission
Balance the water and get the pool running so you can enjoy your new pool for years to come. Either hire a maintenance pool company or learn to maintain the pool yourself.
The 3 Most Common Mistakes Made By Pool builders And How You
Can Easily Avoid Them..
Sadly, when it comes to building that perfect pool, too many pool builders make simple mistakes which can cost dearly. Don’t repeat their mistakes, you could follow in their footsteps and end up falling well short of your goals.
But don’t worry – we’re here to help.
We’ve put together a list of the 3 most common mistakes made by pool builders– as well as easy-to-follow tips on how to avoid them.
#1 First Mistake
Far and away the most common mistake self-builders make is Backfilling their swimming pool with the wrong material. We see it all too often - we’ve honestly lost count of how many people we’ve come across who have made this error.
This move is the #1 reason why paving cracks, the ground settles around your pool, and worst of all, it rips pipes right off the back of the wall. Seriously – this costs thousands and thousands of pounds to rectify.
The wrong backfill doesn’t support or drain properly, leading to catastrophic structural problems and pipe damage that turn your pool paradise into a money pit.
Don’t be that person. Seriously – this costs thousands and thousands of pounds to rectify.
Nail it right from the start with the proper materials and keep your wallet, and your sanity, intact.
Clean Pea-shingle encased in membrane is the way to avoid any problems in the future.
#2 Second Mistake
Not covering the sides of the dig is another common mistake and is right up there with incorrect backfill in terms of the amount of time and money it costs pool builders. It’s such an easy mistake to avoid, but it happens WAY more often than it should.
Rain and sun can wreak havoc on your excavation, drying out the earth and turning it into a crumbling mess. This isn’t just a minor issue it’s a full-blown disaster waiting to happen. The soil can become unstable, leading to collapses that will cost you hours of backbreaking labour to fix., massive cost overruns and delays to your project. Protect your project from the start by covering the soil with a damp proof membrane. This simple step locks in moisture and prevents drying out. It’ll save you a ton of money.
#3 Third Mistake
This mistake might not be as common as the first two we’ve outlined – but that doesn’t make it any less harmful. In fact, it could be the most costly out of the three – an error that could see you throw away thousands of pounds and hours of your time and leave you further away from achieving your goal than when you first started.
Neglecting to put a proper shutter around the pool base is a colossal mistake. Without it, your pool floor turns into a rough, uneven disaster. Floating the base without proper formwork means you're setting yourself up for wasted time and money. You’ll be forced to screed the rough base just to get it smooth again, doubling your effort and draining your budget. It’s pure inefficiency and amateur hour at its worst. Don’t fall into this trap. Invest in installing a proper shutter from the start, ensure a smooth pour, and save yourself the headache of redoing work.
12 Non-Negotiable Questions You Must Ask Any Pool Company Before You Sign
Stop right there, whether self builder or pro ask these 12 critical questions, They’ll help you uncover which companies are legit and which ones are just blowing smoke.
You don't want to end up stuck with shoddy equipment that leaves you high and dry.
Let’s be real: You can always find cheaper options.
But opting for bargain-basement gear is like buying a knockoff phone. Sure, it’s cheap now, but it’ll break down faster than you can say "software update.”
Imagine constantly replacing faulty parts that’s not just a hassle, it’s a money pit.
Reliable, high-quality equipment isn’t just a luxury; it’s essential for a pool that lasts.
Think of it like this: Investing in top-notch gear is like paying for a quality insurance policy. It might cost more upfront, but it saves you from endless repairs and replacements down the line.
When you’re comparing pool systems don’t just look at price. Use these 12 questions to cut through the fluff and find a company that’s serious about delivering real, dependable results. Every. Single. Time. Your pool project and your sanity will thank you.
#1 How Much Experience Do You and Your Team Have in Selling, Specifying, Designing, and Building Pools?
When it comes to pool construction, experience isn’t just a nice-to-have; It’s a game-changer.
You want a team that’s seen it all and handled it all. Why?
Because seasoned pros don’t just get the job done; they make the entire process smooth and stressfree for you.
Here’s the lowdown: at Orbro, we’re not just talking about experience; we’re talking about decades of it.
Our team boasts a staggering 87 years of combined pool construction expertise. Directors Oliver and Benedict Bonsor have each logged over 25 years in the construction industry, and it shows. In 2009, we snagged exclusive rights to import and distribute the Clipblox system in the UK. Since then, we’ve been behind the design and build of high-profile pools across the country. Think commercial giants like Glen Eagles Golf Resort and The Cube Hotel in Birmingham. We’ve also tackled Natural Swimming Pools for the Biotop Group, domestic gardens, indoor pools, and school pools.
Our Pool Mechanical Engineer isn’t just a name on a business card. With 44 years in the industry and a member of the Institute of Swimming Pool Engineers (MISPE), he’s built 347 pools, worked on film sets, and custom-designed all our pool kits to meet unique requirements. Our highly trained team and solid connections with top professionals ensure we’re always evolving and delivering the best pool kits out there.
So, when you’re choosing a pool company, make sure you’re with a team that brings unparalleled experience and ongoing innovation to every project.
#2 Where and How Long Has the Product Been Around?
Where and How Long Has the Product Been Around?
Let’s get straight to it understanding where your pool system comes from is crucial. Too many pools out there are slapped together with cheap parts and a lack of know-how about delivering a safe, highquality pool system that’s going to last for generations to come.
Here’s the real deal: SolidPool has been a powerhouse in the pool industry, and their story is one of innovation and expertise.
Founded in 1911 as "PRAT Engines," the company started by manufacturing electric motors. By 1956, under Monsieur PERROT, they shifted focus to industrial and pool pumps, renaming themselves "PRAT Pumps." The company made its first move into pool construction in the 80s and launched the Tout Pour L’Eau brand in 1995, even before the internet!
In 2001, Philippe PERROT decided it was time to create a standout pool kit. Partnering with Mr. PERNET from a plastic company, they developed Clipblox in a cutting-edge French factory. Their combined expertise led to the creation of a revolutionary 100% concrete structure that’s easy to use and highly effective.
Today, SolidPool is an international brand, installed in 33 countries with 30 dealers. With over 22 years of relentless innovation, they remain at the cutting edge, constantly improving and adapting to stay ahead of the competition.
#3 DO YOUR POOLS COME WITH STRUCTURAL CALCULATIONS? Can You Show Me
Supporting Evidence?
It's easy for suppliers to claim their pool shells are structurally sound in any ground condition just to close the sale.
But the reality? It's not as simple as digging a hole and dropping in a pool.
Key Questions:
•Are your walls strong enough when the pool is empty like the ClipBlox system?
•Do we need to backfill the structure with concrete or can it stand alone like the ClipBlox system?
At Orbro, we don't leave anything to chance.
We've conducted extensive research into the Clipblox system's strength.
Paul Bonsor MSc, Fiche, C Eng., who designed concrete structures for Nuclear Power stations, performed an in-depth, week-long study on the system, rigorously verifying the French calculations. Whether your pool is in-ground or above-ground, we'll provide expert advice on the best shell for your project. We'll specify the precise amount of rebar and concrete strength required to meet the most stringent building codes for water-retaining structures.
#4 What Pool Fittings Are in Your Kit?
Think all plastic pool fittings are the same? Think again. ClipBlox pools are supplied standard with high-quality, white plastic fittings that outperform the rest. While the market is flooded with flimsy, low-grade options that fade and fail, we deliver durability. Our fittings resist the wear and tear from chemical-treated water, ensuring they stay strong and vibrant. Want more? ClipBlox has got you covered. Upgrade to our premium stainless-steel fittings for the ultimate in strength and style. Plus, we offer a range of colours: grey, black and sand. Why settle for ordinary when you can have extraordinary?
Our fittings don’t just meet standards; they set them.
#5 What Type of Pipes Do You Supply in the Package?
When it comes to pool pipes, there are two contenders: PVC and ABS. In our ClipBlox pools we only supply the best – Grey PVC Pipework. Why settle for the standard white ABS pipes when you can have superior quality?
Our Grey PVC pipes outshine ABS in every way. They handle a wider range of temperatures and resist chemical-treated water with ease. This is the same high-grade material used in commercial installations. Our Grey PVC Pipe is manufactured to the prestigious BSEN1452 rating. Here's the breakdown:
•50mm pipe: Outer wall thickness of 2.4mm
•63mm pipe: Outer wall thickness of 3mm Choose ClipBlox. Choose durability. Choose reliability. Choose Grey PVC Pipework.
#6 What Type of Glue Do You Supply in the Package?
Blue glue is the go-to for anyone diving into pool plumbing. It can be used in the wet and dry, and it’s fast-acting, setting with a blue hue that makes visual inspections of your pipework a breeze before pressure testing. Get it right the first time, every time, with blue glue – because precision matters.
#7 What way do you filter the water and why?
We filter with sand because it’s the tried-and-true warrior of water purification. Its simplicity is its strength, and its compatibility with other additives makes it unstoppable. Most pool filters? They’re made from fiberglass – smooth on the outside, but deliberately rough on the inside. This texture is designed to capture bacteria right where you don’t need it, ClipBlox filters are different. They’re forged from chemical and weather-resistant modified polypropylene. Injection moulded and thermally welded; these filters are built to withstand the harshest conditions.
Versatility? Absolutely. Whether with a top or side-mounted six-way valve our filter provides a seamless, smooth finish inside and out, eradicating any chance of bacteria growth. Why settle for mediocrity when you can have the best? Our sand filters don’t just clean your water; they dominate the battlefield of pool maintenance.
#8 What is the Quality of the Pool Water Like?
Water quality isn't just important; it's crucial. The wrong balance of chemicals can lead to irritation and sky-high costs.
Over 2,000 years ago, the Ancient Greeks discovered something incredible: algae wouldn't grow in water stored in copper containers. Not only that, but it seemed to purify the water. It wasn't until the 19th century that we fully understood why. Today, we've harnessed that ancient wisdom, using charged ions to obliterate bacteria and algae.
Our system is a masterpiece of simplicity and efficiency. As your pool water flows through the in-line cell unit, a powerful blend of copper and silver ions is unleashed, annihilating bacteria and wiping out algae. Yes, you’ll still need a touch of chlorine, but here’s the game-changer: our method slashes chlorine use by up to 60%. That’s less than the chlorine content of tap water! Perfect for those sensitive to chlorine, and a major win for your wallet with lower maintenance and running costs. We're so confident in our water quality that we'll drink from our pools to prove it. Our equipment doesn't just work; it excels, keeping chlorine levels impressively low and your pool water pristine.
#9 What Pump Comes in the Kit?
Imagine the vast sea of pool pumps available today. How do you determine which one is perfect for your pool? It's simple - focus on the shaft!
Think of the pump as the heart of your pool, tirelessly working to keep the water circulating. That’s a big job, and it demands the best.
Our pool pumps are not just any pumps; they are the epitome of efficiency and silence. Here's why they stand out:
Enclosed Impellers: Unlike others, our pumps feature enclosed impellers that sit on their own axle.
Superior Shaft: Crafted with high-grade stainless steel and a mechanical seal made of graphite and alumina, our shafts resist rust unlike those made of mild steel.
5-Year Warranty: Confidence in quality is why we offer a 5-year warranty.
Energy Efficient: Our pumps bear a government seal of approval for their superior efficiency, using less power to deliver an exceptional flow rate.
#10 How Do You Heat Your Pools?
We get this question all the time: What's the most efficient way to heat a pool? The answer depends on various factors like location, size, and available resources. You have options gas, electric, oil, solar, ground source, or air source.
But here’s our top recommendation: air source heat pumps.
Our Inverter Heat Pumps are a game-changer. They are 10 times quieter than standard heat pumps and boast a COP (Coefficient of Performance) of over 15. These pumps can operate in temperatures as low as -7°C and heat water up to 40°C. That means you get whisper-quiet operation and nearly year-round heating.
Even if you don't need year-round heating, our heat pumps shine during those tricky early and late season months when keeping your pool warm is most challenging. Plus, they save energy by intelligently controlling the pool filtration pump, reducing noise and running costs while maintaining your ideal pool temperature.
What powers our Heat Pumps? Twin-Rotary Mitsubishi DC Inverter Compressors. These marvels of engineering balance torque to minimize vibration, resulting in unmatched efficiency and quiet operation.
Our Heat Pumps come loaded with features:
Digital Controls: Easy operation and precise temperature settings.
Titanium Heat Exchanger: Resists chlorine damage for long-lasting performance.
Soft Start: Reduces power spikes when the unit starts up.
Unmatched Warranty: 7-year coverage for the compressor and heat exchanger.
We’ve got you covered, whether your pool is 20m³ or 120m³. Choose our Heat Pumps for superior efficiency, silence, and reliability.
#11 How Do You Waterproof the pool?
Tiling
Thanks to the game-changing Clipblox, you can achieve a flawless finish with ease. Just skim the blocks while pouring the concrete, and you’re left with a perfectly smooth surface. Next, apply a top-notch waterproof tanking layer, at this point your pool can be filled and its 100% waterproof a fail-safe.
Once tanked and dry you’re all set to tile.
Different Types of Liners
While some companies will push whatever liner they can to seal the deal, we’re committed to quality. That’s why we only supply on-site liners far superior to those flimsy bag liners.
Top-tier pool companies are increasingly choosing on-site lining for their concrete pools, and for good reason. The quality of both the liner and the underlay is outstanding. We start with a 4mm underlay on the walls, then fit a 2mm liner that's custom-cut and welded into place. This method eliminates creases and lines around the corners and coping, giving you a sleek, seamless finish.
Here’s the kicker: our on-site liners come in various colours and textures. Our expert fitters chase a line out from under the coping and install a profile to weld the liner, so there’s no unsightly mortar bed between the coping and the liner. This not only provides a flawless look but also shields the mortar from frost damage. Plus, you get peace of mind with a 12 or 15-year warranty on the liner way better than the 7-year warranty on bag liners.
#12 What are the walls made of?
When it comes to swimming pool kits, the options are endless. You’ve got everything from metal and plastic frame options to above-ground setups or ones dug into the earth.
The supporting walls or panels are often a mix of plastic, steel, or aluminium, all joined to the frame and then lined with heavy-duty vinyl to create the pool shell.
On the other hand, one-piece pools are delivered and craned into place. Wooden pool kits, block work shells, and tiled pools are built using concrete whether shuttered or sprayed.
Now, let’s get into the Clipblox system. This isn't just any pool wall; it's the result of 22 years of relentless innovation and expertise. What do you get?
A reinforced concrete pool shell that's unbeatable in strength. Imagine a pool system so fool proof its Guaranteed never to burst, warp, crack, or leak no matter your building skills. This isn’t just any system; it’s engineered for flawless results, letting even a novice build a pool that’s award-winning.
Just remember to follow the lifting guidelines to avoid any injuries while building your pool.
THE MYSTIC ART!
The TRUTH About the Pool building industry
And Why Most self-builders Fail At Achieving Their own dream pool
Have you ever tried to do something difficult without help? It could be something as simple as trying to move a heavy piece of furniture – like a desk – all by yourself. You probably knew in the back of your mind that it was better ask a friend or family member for help – but you became impatient and gave it a go, to see if you could do it yourself.
Sadly, shortly after trying, it became clear that you just couldn’t do it. The desk was WAY too heavy. Not only did you knock over the nearby lamp, but you’ve now got a stabbing pain in your lower back… and the desk is still stuck right where it was.
If only you’d asked for help.
Well, the truth is the pool industry is a lot like that. It can be very difficult – or even impossible – to build your own Pool without any assistance.
Of course, there is one huge difference. Building your own Pool isn’t as simple as moving a piece of furniture. No, there is a LOT more to it than that. And the consequences could be far more costly than hurting your lower back or putting a scratch on the wall.
Not only could you cost yourself thousands of pounds, but you could also set yourself back months on your journey. You could end up further away from achieving your Swimming pool than you are right now.
Sadly, this is something that happens all too often to self-builders.
Instead of seeking expert help, they try to go it alone and fall well short of achieving their goals.
Most of the people we speak to have told me just how closed off pool companies are, and I'm sure it’s the same for you,
I'm guessing you've probably done loads of research or even got a pool company to quote you a pool and are trying to justify the cost involved.
Swimming pool companies don’t want to give away information because their entire business model hinges on keeping you in the dark.
They thrive on your confusion, using jargon and smoke and mirrors to make you believe you need their services.
If they handed out their secrets, you'd realise just how simple building your dream pool can be, and they’d lose out on their profit margins.
It's all about control and keeping you dependent on them.
But here’s the truth they don’t want you to know that you can do it yourself, better, faster, and for a fraction of the cost.
It’s time to flip the script and take control of your pool project with the knowledge they’re desperate to keep from you. It’s imperative that you get expert advice to achieve your goals. And in the pool industry there’s no one better than Orbro. We have 25 years of experience in Building pools and their surroundings – during which time we’ve helped over 150+ customers. We can help you avoid the common pitfalls, steer clear of the costly mistakes and build your dream pool in the shortest possible timeframe.
Just in this book we’ve demonstrated that you can save between £8.5 and £21.5k using ClipBlox and you haven’t even spoken to us yet!!
To find out how we can help, get in touch with us below for a free, no-obligation consultation.
Claim Your FREE No-Obligation 30-Minute Consultation
We’ll Give You every associated cost of building your pool
Thank you for taking the time to read this eBook – we hope you’ve found the information helpful and can use what you’ve learned to trust in our ClipBlox system to build your pool.
If you’re truly serious about pool building, then we have excellent news. For a limited time only, we’re offering you a free, no-obligation session with one of our Multi Award Winning pool building experts.
During your 60-minute session, we’ll discuss your current situation, what your goals are and how we can help you achieve them using our proven system. We will also build you a bespoke price in front of your eyes so you can see every cost associated with your pool build..
Your only limited by your imagination… so to get an accurate price share your vision with us.
We’ll also cover a stack of valuable information together, including…
How you can build a pool in a surprisingly short timeframe, what you should never do when building a pool, and how to avoid all the most common mistakes that pool builders make which sabotages their success and costs them thousands.
There’s NO cost or obligation to move forwards with our service afterwards if you feel like it’s not for you. It’s simply a FREE information session designed to educate you and provide value to you in advance.
To claim your FREE consultation or find out more information about this limited-time offer, all you have to do is click the link below. It’s just a chat that’s going to save you thousands of pounds!!
Claim Your Free Session Here