Optibelt Automotive Brand News Edition 2018

ISSUE 2018

AUTOMOTIVE BRAND NEWS

WHAT REALLY COUNTS WHEN REPLACING A BELT. www.optibelt.com

Page 2

AUTOMOTIVEBRANDNEWS

“THE MILD HYBRID PLACES ENTIRELY NEW DEMANDS ON DRIVE TECHNOLOGY.” Dear Reader, “What would actually happen if my brand disappeared from the market tomorrow?” is a question that we as companies should ask ourselves much more often.

The latest issue of Automotive Brand News gives us an idea of where and why Optibelt would be missed – not only in the automotive s­ egment. Without us, it’s possible that luxury liners in Mexico or hightech folding bikes from Lake Constance would have to get along with less motive power ...

There are certainly plenty of topics with many ifs and buts in the automotive industry, as the Brand News proves once again. Our colleagues from the original-equipment department show you where the trends in the drive system sector are heading. Because, to be honest, ­electrification raises many questions – and not only in our industry. So it’s good to know that there’s a bridge technology alongside pure electro-mobility with potential that is nowhere near exhausted: the mild hybrid.

You can also discover why the correct matching of belts and vehicles is so important for workshops and dealers and, of course, all the latest news from Optibelt. We have naturally collected a new handful of bizarre facts from the world of automobility that are guaranteed to make you smile and ensure that this little all-inclusive package is both informative and entertaining.

But to get back to the question we asked at the start: the power that inspires us to create the best possible all-round packages for our ­customers has been a driving force for Optibelt since 1872. And we do everything to ensure that our customers will never have to do with­ out this unique power – neither tomorrow, nor the day after tomorrow.

Enjoy reading, Your Optibelt Automotive Team

CONTENTS

Page 3

CONTENTS 4 – 5

6 – 7 8 – 11

12 – 13

EXCURSUS OPTIBELT

OE SYSTEM COMPETENCE

OE SYSTEM COMPETENCE

14 –1 5 WORTH KNOWING

PRODUCT RANGE

© 2018 ARNTZ OPTIBELT GROUP GERMANY

16 –1 7

Page 4

AUTOMOTIVEBRANDNEWS

VISIONARY SINCE 1872.

Optibelt has its sights set firmly and completely on the entire drive system concept. Four divisions offer industry-specific solutions for the areas POWER TRANSMISSION, AUTOMOTIVE TECHNOLOGY, MATERIAL HANDLING and ELASTOMER SOLUTIONS. As Optibelt sees itself as a true provider of solutions, our development expertise is increasingly in demand at very early stages of development programmes – not only at the world’s best automobile manufacturers. Worldwide.

EXCURSUS OPTIBELT

Page 5

OPTIBELT – TWO EXAMPLES OF INNOVATIVE POWER Luxury liners in Mexico

ETN TURISTAR LUJO Optibelt Mexico is one of the leading manufacturers of drive belts for the Mexican market. The past six years have seen a 14-fold increase in revenue. A total of 14 employees provide products and services for a wide range of industries – from paper manufacturing and food ­processing to the construction and transport segments. One of these is ETN Turistar Lujo – a bus operator that has earned itself an ­excellent reputation since its founding in 1991. The fleet of luxury coaches from ETN Turistar Lujo serves more than 70 destinations in 24 Mexican states. With all conceivable comforts: the coaches are air-conditioned, have extra-wide seats and touchscreen panels.

breakdown due to an Optibelt drive belt wearing out.” So it’s hardly surprising that Optibelt now not only supplies the drive belts, but also trains the maintenance staff in 14 of the company’s own workshops.

Custom solutions for bikes

BERNDS BIKES – THE BIKE BUILDERS FROM LAKE CONSTANCE He sketched his first bike when he was three, and went on to build his first ideas at the age of seven: Thomas Bernds’ whole life revolves around (folding) bikes. In the meantime, he has been offering belt drives on bikes as an alternative to classic chain drives for more than 20 years.

Although a belt drive offers numerous advantages for bikes, it does have its own special quirks: while the length of a chain can easily be altered to fit, a belt is a closed system. The bike frame must be constructed in a way that allows it to be fitted. Bernds developed a special tail construction that – like motorcycles – has an open drive system. This allows the toothed-belt drive to be fitted without any problems and – as opposed to solutions provided by other manufacturers – riders can replace it themselves without special tools when the time comes.

Since November 2017, all bikes with toothed-belt drives from the Bernds Bikes workshop are fitted with optibelt DELTA CHAIN Carbon Carbon belts. Optibelt is also currently working on the prototype of a particularly long and slim belt for a folding tandem.

© 2018 2017 ARNTZ OPTIBELT GROUP GERMANY

For years now, the entire fleet has been fitted with drive belts from Optibelt. “In the past, we battled against one breakdown after another.

Many drive belts simply couldn’t cope with the constant stresses under load. After a stringent testing programme with belts from various manu­ facturers, we were finally convinced by the optibelt TRUCK POWER range from Optibelt,” says Ismael Cerano, fleet manager for maintenance at ETN Turistar Lujo. “The Optibelt drive belts impressed us with extremely high mileage – I can’t recall a single case of us suffering a

AUTOMOTIVEBRANDNEWS

Page 6

YOU CAN’T FIND A COMPATIBLE BELT JUST BY LOOKING

Toothed belts and V-ribbed belts are subject to a perfectly normal wear process. So, sooner or later, the time will come when they have to be replaced. Workshop specialists know from experience just how important it is to fit high-quality parts – and make sure there’s a perfect match between the vehicle and/or the original-equipment number. But why is this so important? After all, many drive belts look almost identical ...

BELT COMPATIBILITY

Page 7

TOOTHED BELTS – THE SPECIFICATIONS ARE DECISIVE Are belts with the same number of teeth, the same width or the same profile also com­ patible? No – and the reason for this is per­ fectly simple – even though it may not be visible to the naked eye: toothed belts are specially designed for predefined, enginespecific requirements and replacement at specified intervals. Because of this, their specifications differ radically from one belt to another:

• T he formula of the rubber mixture varies – and this alters factors such as temperature resistance and, for example, the required bending rigidity.

• T he materials of the tension cords provide different levels of tensile strength, for ­example, the cords can be made from glass or aramid fibres.

• D ifferences in the materials used for the upper textile layer of the belt backing and belt base, or slight differences in the tooth angle or pitch, all lead to different product properties.

V-RIBBED BELTS ARE NOT JUST ANY OLD BELTS

But here, too, precise matching to the vehicle and/or the original-part number is essential for finding the right quality. To a certain extent, elastic V-ribbed belts are a special case: as they preserve tension throughout their service life, no additional tensioning systems are ­required. Nevertheless, installing them ­requires a special mounting tool (optibelt MT-A, ­optibelt MT-A II) to prevent potential overstretching. Here, it is particularly important to avoid ­confusion between this type and classic V-ribbed belts.

A CLEAR NUMBER So it’s not a matter of better or worse; it’s all about specific performance dimensions. Tip: It’s good to know that precise matching to vehicles and original-part numbers guarantees clear and safe part assignment. The assignment process is naturally taken off your hands

by Optibelt. All you have to do is select the vehicle, then we guarantee that you get the right quality. Replacement “by eye” alone – even when the tooth pitch, the width and the length are identical – is never a good idea.

The conclusion is clear: workshop specialists can rely completely on the matching of belts to vehicles by Optibelt.

© 2018 ARNTZ OPTIBELT GROUP GERMANY

V-ribbed belts are generally used for power transmission to ancillary aggregates in vehicles.

These belts are also designed to meet manufacturers’ specific requirements. Although the failure of a V-ribbed belt is not as critical as the failure of a toothed belt, the same principle applies: sooner or later, a belt that doesn’t fit will cause problems that could potentially lead to damage of the aggregate it drives. In the case of V-ribbed belts, the number of ribs, the profile and the length can be read from the article number.

AUTOMOTIVEBRANDNEWS

Page 8

optibelt KIT ZRK + WATER PUMP On request, the ­optibelt KIT ZRK can also be supplied with a matching water pump.

optibelt KIT ZRK Simply good sense: the repair kit contains a set of perfectly matched components: an Optibelt toothed belt with the corresponding tension and guide idler pulleys and installation materials.

optibelt RBK

optibelt RBK SCC

optibelt EPK

High-performance V-ribbed belts for ancillary aggregates in cars and light commercial vehicles.

The world’s first V-ribbed belt with a replace­ ment indicator: the optibelt RBK SCC – ­SECURED CHANGE CONTROL. Available only from Optibelt.

The elastic V-ribbed belt transmits power without an additional tensioning system.

Elastic cords provide automatic tensioning.

Always use Optibelt special mounting tools.

PRODUCT RANGE

Page 9

optibelt SUR TENSION AND GUIDE IDLER PULLEYS

optibelt KIT RBK

Pulleys and belts make up an integrated system – at Optibelt, you get everything from a single source. The original-equipment quality promise naturally applies to all Optibelt products.

The service kit of original-equipment quality for cars and light commercial vehicles. The package contains an optibelt RBK drive belt and matching tension and guide idler pulleys.

optibelt ZRK Optimum power transmission, even after thousands of hours in service under extreme loads – Optibelt developed ZRK toothed belts to fulfil precisely this specification.

The optibelt MARATHON 1 belt was developed for power transmission to ancillary aggregates in the engines of cars and light commercial vehicles. This open-flank V-belt with ground teeth is characterised by its long service life and lowstretch tension behaviour. From June 2018, the optibelt MARATHON 1 will be replaced by the new optibelt MARATHON X.

© 2018 ARNTZ OPTIBELT GROUP GERMANY

optibelt MARATHON 1

AUTOMOTIVEBRANDNEWS

Page 10

optibelt TRUCK POWER KIT RBK Complete and easy to install: a convenient repair kit with a V-ribbed belt and tension pulleys of proven original-equipment quality.

optibelt TRUCK POWER KB/KBX Open-flank power transmission belts (kraft­bands) with ground teeth and single-belt character­ istics. Ideal for long centre distances, high outputs and extreme vibrations, for example, for air-conditioning compressors or fans.

optibelt TRUCK POWER MARATHON 2 M=S Open-flank belt with ground teeth. Precision V-belt for power transmission to ancillary ­a ggregates in trucks and buses. May be used in sets without measurement.

optibelt TRUCK POWER RBK High-performance V-ribbed belt for power transmission to ancillary aggregates.

PRODUCT RANGE

Page 11

optibelt TRUCK POWER SUR In addition to complete repair kits, Optibelt also offers separate tension and guide idler pulleys for trucks and buses.

optibelt TRUCK POWER CP

Š 2018 ARNTZ OPTIBELT GROUP GERMANY

Cooling aggregates maintain correct temperatures in commercial vehicles. An unbroken cooling chain is absolutely essential for guaranteeing proper delivery of sensitive goods. As an original-equipment manufacturer, Optibelt is familiar with the high demands placed on the drive systems required and has developed special belt models in its own research and development department in Germany.

AUTOMOTIVEBRANDNEWS

Page 12

A BREATH 48-volt battery

FUEL SAVINGS AND COST-EFFICIENCY: THE BELT-DRIVEN STARTER GENERATOR WITH A DRIVE SYSTEM FROM OPTIBELT The automotive industry is in the middle of an exciting phase of transition. From 2020 onwards, new vehicle emissions may not exceed 95 grams of CO2 per kilometre. These requirements cannot be fulfilled by conventional petrol or diesel engines ...

OE SYSTEM COMPETENCE

Page 13

H OF

DRIVE AND SAVE

NEW CHANCES FOR INTERNAL COMBUSTION ENGINES

In the long run, current trends point towards electrification. ­N evertheless, the most promising drive system alternative is ­currently the mild hybrid. Here, a 48-volt electrical system ­expands the existing 12-volt system and enables the generator to act as an additional electric drive.

THE LATEST NEWS FROM THE ORIGINAL-­ EQUIPMENT DEPARTMENT ...

Vehicles with a start-stop function have been a standard feature on Europe’s roads for a long time. However, the new generation of belt-driven starter generators brings entirely new output ratings – and potential savings. Configured for 48-volt electrical systems, it generates additional electric drive power output levels of between 10 and 15 kilowatts. This power can be utilised to reduce the load on the petrol or diesel engine when starting and can provide additional power for accelerating (boost). For the first time, recovered braking energy can be converted back into propulsion.

12-volt battery

DRIVE LAYOUT

generator

tensioners

crankshaft

Hybrid Controller

AC

Electric motor/generator

The special configuration of the mild hybrid demands a drive belt with extremely high performance: The drive switches repeatedly between generator- and crankshaft pulley. For such a task, the RSG belt must be designed to effortlessly cope with up to 1.2 million of these switching cycles. Optibelt has therefore invested in a new, special testing facility to precisely investigate and check the extreme stresses involved. The result: optibelt RSG V-ribbed belts are based on aramid-fibre-reinforced EPDM rubber mixes and special aramid cords. These ensure maximum cyclic bending-stress resistance, extreme tensile strength and optimum wear properties.

There’s no doubt about it – the RSG will very soon make its breakthrough as a mass-market product – not only in view of future legal requirements. And will therefore sooner or later play a significant role in the aftermarket. Our advantage: Optibelt will also be the first to offer system-compliant high-performance belts of original equipment quality for aftermarket sales.

© 2018 ARNTZ OPTIBELT GROUP GERMANY

… TOMORROW’S AFTERMARKET

AUTOMOTIVEBRANDNEWS

Page 14

Corporate

A QUANTUM LEAP IN TESTING TECHNOLOGY

Optibelt inaugurates the “test facility of the future” In August 2017, the Arntz Optibelt Group inaugurated the new “test facility of the future”. The innovative test facility, covering an area of some 2,200 square metres, was built for around four million euros at the company’s headquarters in Höxter, Germany.

It offers twice the amount of space of its predecessor for testing during serial production and the testing of new developments and customer-specific applications. The energy concept of the new facility guarantees a sustainably low environmental impact and conserves valuable resources. The project was sponsored by the environmental innovation programme of the German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety with a grant of 650,000 euros.

“Without exaggeration, this is a quantum leap for modern testing technology”, said Optibelt’s CEO Reinhold Mühlbeyer. The new ­facility offers 29 individual testing cells, each with an area of around 50 square metres. The modular and interconnected test bed configuration satisfies the most stringent technical demands and ensures that Optibelt is ideally positioned for the development of tomorrow’s innovative drive system solutions.

NEWS

Page 15

Marketing-Support

MARATHON X We have made progress again: The optibelt MARATHON X open-flank V-belt is a further advanced technical development of the p ­ roven ­optibelt MARATHON 1. Both the tooth geometry and the ­materials utilised in its production have been optimised – the ­M ARATHON X is now manufactured from temperature-resistant EPDM (ethylene ­propylene diene monomer rubber) and is thus ­ideally ­positioned to meet today’s market demands. The ­systematic ­replacement of individual belt sizes began in June 2018. Tip: It’s good to know that both the optibelt MARATHON 1 and the ­M ARATHON X fulfil the automotive industry’s strictest OEM standards and all in-house quality standards at Optibelt.

So there’s no need to worry about any ­M ARATHON 1 belts sold off from existing stocks.

Marketing-Support

VW BEETLE Incredible! One and the same Optibelt drive belt has been guaranteeing the reliability of a VW Beetle 1303 for the past 39 years and has more than 158,000 kilometres on the clock.

The Beetle, first registered on 30 August 1979, is still in the hands of its first owner and, besides its original drive belt, still runs with many other original parts. Optibelt demonstrates that quality is a standard, and by no means just an empty promise. Usually, drive belts must be replaced at considerably shorter intervals. VW has placed its trust in Optibelt quality since 1950, and this reliability pays off – even today, Optibelt is the original-equipment supplier for several VW engines.

Corporate

As in the previous year, Optibelt is taking part in the IAM media campaign in Germany again in 2018. The aim of the campaign is to increase the positive perception of the capabilities of the parts ­market in the public eye and to support the marketing efforts of qualified independent workshops. After all, good quality is not exclusively the domain of tied workshops. Thanks to components of ­original-equipment quality, independent workshops can also offer their customers unbeatable value for money. With this campaign, we support the customers of our trading partners.

© 2018 ARNTZ OPTIBELT GROUP GERMANY

IAM

Page 16

AUTOMOTIVEBRANDNEWS

QUITE BIZARRE MORE CARS THAN PEOPLE:

IN THE US

WEST COAST CITY OF LOS ANGELES,

EVERY HOUSEHOLD OWNS AN AVERAGE OF

1.8 VEHICLES.

PETROLHEADS: 90 % OF WESTERN EUROPEAN

MALES KNOW THE ROOM FOR AN MOOSE IN THE BACK? IN ALASKA, IT’S CONSUMPTION AGAINST THE LAW TO STRAP

FIGURES OF THEIR CARS, BUT ONLY ANIMALS

TO OF THEM KNOW THE ROOF 58 % THEIR BLOOD

GROUP.

OF YOUR CAR.

WORTH KNOWING

ANY MORE QUESTIONS? Do you want to know more about Optibelt?

You can get answers to all questions about the company and our drive solutions quickly and personally. Simply send us an email – we are pleased to hear about your interest. iam@optibelt.com

…

SMART FORMORE?

AT A PINCH, YOU CAN GET MORE THAN TWO PEOPLE INTO

MUSICAL MEDICS:

A IN 2010, 16 WOMEN SQUEEZED THEMSELVES INTO THE 2.7-METRE CAR –

A WORLD RECORD.

THE SIRENS OF GERMAN AMBULANCES BLARE OUT IN

A MUSICAL INTERVAL CALLED A FIFTH.

CRIMINAL CRUISING:

DRIVING AROUND AIMLESSLY IS

AN OFFENCE IN GERMANY (ACCORDING TO SECTION 30, PARAGRAPH 1, SENTENCE 3 OF THE GERMAN ROAD TRAFFIC ACT),

AND CAN LEAD TO A

FINE OF 20 EUROS.

© 2018 ARNTZ OPTIBELT GROUP GERMANY

SMART FORTWO.

Page 18

AUTOMOTIVEBRANDNEWS

WHERE

TO FIND US

AUTOMOTIVE TECHNOLOGY DISTRIBUTORS

Page 19

EUROPE GERMANY

UNITED KINGDOM

NETHERLANDS

SCANDINAVIA

FRANCE

Optibelt GmbH (Headquarters)

Optibelt (UK) Ltd.

Optibelt Nederland B.V.

Optibelt Skandinaviska AB

Optibelt France S.A.S.

Corveyer Allee 15

5, Bishops Court, Winwick

Haarlemmerstraat 28

Stadiongatan 60

54, Rue de la Gare

37671 Höxter

Quay / GB-Warrington,

2181 HC Hillegom

21762 Malmö

B.P. N° 13

Germany

WA2 8QY Cheshire /

Netherlands

Sweden

68520 Burnhaupt-le-Haut

 +49 52 71 6 21

United Kingdom

 +31 252 52 82 83

 +46 40 59 21 20

France

 info@optibelt.com

 +44 19 25 41 57 77

 info@optibelt.nl

 info@optibelt.se

 +33 3 89 62 75 10

 Mr Becker / M r Tiemann

 info@optibelt.co.uk

 Mr Kowalski

 Mr Nilsson

 optibelt-france@optibelt.fr

 Mr Rice

 Mr Poulmar

SWITZERLAND

BELGIUM

SPAIN

ITALY

AUSTRIA

Optibelt AG (Switzerland)

Optibelt GmbH (Filiaal Belgie)

Optibelt España S.A.

Optibelt Italia srl

Optibelt Österreich GmbH

Bodenackerstr. 70

Draaiboomstraat 6 bus 8

C/ de Josep Carner 1

Corso Sempione, 221

Carlbergergasse 38

4657 Dulliken

2160 Wommelgem

08205 Sabadell

20025 Legnano (Mi)

1230 Vienna

Switzerland

Belgium

Spain

Italy

Austria

 +41 62 285 50 00

 +32 33 25 22 75

 +34 937 20 79 60

 +39 331 48 10 20

 +43 18 65 43 97

 vertrieb@optibelt.ch

 info@optibelt.be

 info@optibelt.es

 m.gussoni@optibelt.it

 office@optibelt.at

 Mr Thöni

 Mr Nauwelaerts

 Mr Riegelmann

 Mr Gussoni

 Mr Greifensteiner

POLAND

CIS

RUSSIA

EUROPE (SOUTH-EAST)

TURKEY

Optibelt Polska Sp. z o.o

Optibelt Polska Sp. z o.o

Optibelt Power Transmission

Optibelt Hungary Kft.

Optibelt Güç Aktarma

ul. Budowlanych 11

ul. Budowlanych 11

Moskowskoje Chaussee 1

Szegedi út 1–5

Ekipmanları San. ve Tic. Ltd. Şti.

41-303 Dabrowa Górnicza

41-303 Dabrowa Górnicza

Dedenewo Town,

6792 Zsombó

İTOSB İstanbul Tuzla OSB

Poland

Poland

Dmitrovsky District,

Hungary

7. Cadde No. 14

 +48 32 260 11 76

 +48 32 260 11 76

Moscow Oblast 141800

 +36 62 595 595

34959 Tuzla / İstanbul

+48 32 261 91 92 / 6 4

+48 32 261 91 92 / 6 4

Russia

 info@optibelt.hu

Turkey

 biuro@optibelt.pl

 biuro@optibelt.pl

 +7 495 286 49 28 / 49

 Mr Vas

 +90 216 504 23 00

 Mr Socala

 Mr Socala

 info@optibelt.ru

 info@optibelt.com.tr

 Mr Ushankov

 Mr Güracar

NORTH AND SOUTH AMERICA UNITED STATES

CANADA

BRAZIL

MEXICO

COLOMBIA, CENTRAL ­AMERICA, CARIBBEAN,

OF AMERICA

Optibelt (Canada) Inc.

Optibelt do Brasil Ltda.

Optibelt de Mexico S de RL de CV

Optibelt USA Corporation

3600 Ridgeway Drive, Unit #3

Rua das Castanheiras, No. 200

Av. 5 de Febrero 1702-C

SOUTH AMERICA

565 E. Fullerton Avenue

L5L 0B4 Mississauga, Ontario

Galpao 84 / Jardim Sao Pedro

Zona Industrial Benito Juárez

Optibelt Colombia S.A.S.

Carol Stream, IL 60188

Kanada

- Hortolandia - S.P. / CEP 13187

CP 76120, Queretaro, Queretaro

Calle 36N #6A-65 Of. 1404 Ed. World Trade Center

United States of America

 +1 90 56 08 01 01

- 065 / Brazil

Mexico

 +1 630 628 84 00

 info@optibelt.ca

 +55 11 19 31 16 05 00

 +52 1 (442) 21 03 741

Pacific Mall

 info@optibelt-usa.com

 Mr Woitte

 optibeltdobrasil@optibelt.com

 info@optibelt.mx

Colombia

 Mr Vicente

 Mr Aguilera

 +57 (2) 524-60 09

 Mr Asendorf

 latin-info@optibelt.com  Mr Manosas

CHINA

SOUTH EAST ASIA

INDIA

AUSTRALIA/

AUSTRALIA/

Optibelt Power Transmission

Optibelt Asia Pacific Pte. Ltd.

Optibelt Power Transmission

NEW ZEALAND

NEW ZEALAND

(Taicang) Co. Ltd. / No. 161

204 Bedok South Avenue 1

India Pvt. Ltd. / 301 Shoppers

Optibelt Australia Pty. Ltd.

Optibelt Australia Pty. Ltd.

Ningbo Road / Jiangsu Province /

Singapur 469333

Orbit / Alandi Road /

114–118 Rodeo Drive / 3175

2/2 Jenner St

215400 Taicang /

 +65 65 45 46 82

Vishrantwadi / Pune - 411 015 /

Dandenong - Victoria / Australia

Nundah

China

 sales@optibelt.com.cn

India

PO Box 4483 Dandenong /

Qld 4012

 +86 51 25 358 72 88

 Mr Sartorio

 +91 20 40 70 27 00

South VIC 3164 / Australia

Australia

 sales@optibelt.com.cn

 v.rego@optibelt.in

 +61 3 87 91 27 00

 +61 (07) 32 56 79 9

 Mr Tegethoff

 Mr Singh

 sales@optibelt.com.au

 salesbne@optibelt.com.au

 Mr Evans

 Mr Tollis

MIDDLE EAST

IRAN

AFRICA (FRENCH-SPEAKING)

AFRICA (ENGLISH-SPEAKING)

Optibelt GmbH (Headquarters)

Optibelt GmbH (Headquarters)

Optibelt GmbH (Headquarters)

Optibelt (UK) Ltd.

Corveyer Allee 15

Corveyer Allee 15

Corveyer Allee 15

5, Bishops Court, Winwick

37671 Höxter

37671 Höxter

37671 Höxter

Quay / GB-Warrington,

Germany

Germany

Germany

WA2 8QY Cheshire /

 +49 52 71-6 21

 +49 52 71-6 21

 +49 52 71-6 21

United Kingdom

 info@optibelt.com

 info@optibelt.com

 info@optibelt.com

 +44 19 25 41 57 77

 Mr Bobbert

 Mr Flormann

 Mr Hanner

 info@optibelt.co.uk  Mr Newby

© 2018 ARNTZ OPTIBELT GROUP GERMANY

ASIA, OZEANIA UND AFRICA

37671 Höxter

T +49 5271- 621 F +49 5271- 976200

GERMANY

E info @ optibelt.com

Corveyer Allee 15

© 2018 ARNTZ OPTIBELT GROUP GERMANY

www.optibelt.com/automotive

Printed on Jewel Offset, 80 g/m 2, 100% PEFC recycling paper.

Optibelt GmbH

DATE 07/2018