CAT_APV_CHEMICAL_PROD_EN

CHEMICAL PRODUCTS

renault-trucks.com

The eXtended chemical product range is back...

You can now benefit from an extensive range of products available for use in workshops and over the counter. All listed products have undergone rigorous testing to comply with Renault Trucks’ stringent quality standards and regulations, also guaranteeing compliance with user safety standards. These products have all earned Renault Trucks’ eXtended qualification and may be ordered via Netparts just like any other Renault Trucks replacement part. Relevant Safety Datasheets can be obtained via eXtended QUICKFDS.

CONTENTS INTRODUCTION

P 02

READY-TO-USE SCREEN WASH

P 12

5 IN 1

P 04

QUICK START

P 14

COOLING SYSTEM LEAK STOP

P 05

MULTIFUNCTIONAL LUBRICANT

P 15

DE-ICER

P 06

CONTACT CLEANER

P 16

PENETRATING OIL

P 07

AIR CIRCUIT CARBON DEPOSIT REMOVER P 17

COOLING SYSTEM FAST FLUSH

P 08

COCKPIT SPRAY

P 18

BRAKE CLEANER

P 09

GLASS CLEANER

P 19

WHITE GREASE

P 10

AEROSOL PAINTS

P 20

SUMMER SCREEN WASH

P 11

NOTES

P 22

Chemical products

02 03

Contents

5 IN 1 Multifunctional penetrating spray: 5 in 1

PROPERTIES 5 IN 1 is a synthetic oil-based multifunctional penetrating spray with organic inhibitors to protect against rust and corrosion by dispersing and isolating moisture from the ambient air.

It is silicone-free and has a pleasant odour (citrus scent).

1 - Releases: Thanks to its strong capillary action, 5 IN 1 spray penetrates to the heart of mechanical components, even into the finest of porosities, and releases parts seized by rust (nuts, hinges, pins, etc.).

2 - Lubricates: 5 IN 1 spray contains a permanent active lubricant which forms a thin, colourless film that prevents squeaking and reduces friction and wear.

3 - Protects: The film formed by 5 IN 1 provides protection against moisture and so protects against oxidation and corrosion. Effective and long-lasting preventive protection even in the most extreme conditions.

4 - Disperses moisture: Due to the fact that it clings to metal and has a low surface tension, 5 IN 1 repels water and condensation, preventing the ingress of moisture by covering the surface in a light, oily film. It repels moisture from electrical or electronic systems and reconnects electrical contacts.

5 - Cleans: 5 IN 1 cleans off residues (oils, grease, tar, etc.) without leaving behind any aggressive cleaning agent deposits. It may be used on all metals and alloys as well as plastics.

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Box of 12 x 500 ml aerosol cans with cobra-style head

74 24 047 851

USE Q

Spray on a generous amount of 5 IN 1 and leave to act for a few minutes.

Q

Repeat if necessary.

Specifications

Values

Density at 20°C

0.828

Viscosity at 40°C

< 20.5 mm2 /s

Liquid flash point

61°C

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

COOLING SYSTEM LEAK STOP Stops and prevents leaks on the cooling circuits

Q

Stops and prevents leaks anywhere in the entire cooling system, without the need for dismantling.

Q

Immediate and long-lasting action.

BENEFITS Q

Harmless to hoses, seals and metals.

Q

Resistant to high temperatures, pressures and vibration.

Q

Does not obstruct the circuit, allowing normal circulation of the coolant.

Q

May be mixed with all commonly used antifreeze and coolant products.

Q

Compatible with all petrol or diesel engines.

04 05

TECHNICAL DATA

Packaging

Part No. Catalogue

Box of 12 x 1 L containers

74 24 047 854

USE Q

Shake the container vigorously and pour the product into the cooling circuit.

Q

Engine warm, heating set to the open position.

Q

Top up the coolant level if necessary.

Q

Allow the engine to run for 5 to 10 minutes until the leaks are sealed.

Q

1 litre will treat a 40/50-litre circuit.

Specifications

Values

Colour

Green

Density

1.050

pH

8.5

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

Chemical products

AVAILABLE AS

5 in 1 - Cooling system leak stop

PROPERTIES

DE-ICER Window and lock de-icer

PROPERTIES Q

Effective de-icing of glass and locks down to -25°C.

Q

Ethyl alcohol-based, methanol-free.

BENEFITS Q

Melts ice and frost on windscreens, windows, headlights, locks, etc.

Q

Restricts the reforming of ice.

Q

Not damaging to paint or rubber.

Q

Suitable for use on polycarbonate windscreens.

Q

Leaves no streaks.

Q

Can reach the highest sections of the windscreen.

Q

100% active product, no propellant gasses.

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Box of 12 x 500 ml spray bottles

74 24 047 852

USE Q

Spray onto the area to be treated, working from top to bottom.

Q

In extreme cold conditions, repeat the operation if necessary.

Specifications

Values

Appearance

Clear - uniform consistency

Colour

Blue

Density

0.895

pH

8.0

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

PENETRATING OIL Lubricating and penetrating releasing agent PROPERTIES

Releases: releases and frees and parts seized due to rust and oxidation (bolts, pins, hinges, etc.).

Penetrates: thanks to its great wetting capabilities, it spreads quickly and penetrates deep into oxidised parts.

Lubricates: contains a highly active lubricant that leaves a thin, colourless film that prevents squeaking and reduces wear and the friction coefficient.

Protects: provides protection against moisture and thus protects against oxidation and corrosion.

Disperses moisture: repels water and condensation and prevents the ingress of moisture by covering the surface in a light oily film. It dries electrical circuits rapidly, to prevent short circuits caused by moisture.

Cleans: cleans off residues such as oils, grease, tar, etc. without leaving behind any deposits.

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Box of 12 x 600 ml aerosols

74 24 042 236

Specifications

Values

Density

0.865

Viscosity at +40°C

< 7 mm2 /s

APPLICATIONS Q

Removal of all major mechanical components and mechanical part assemblies.

Q

Lubrication of locks, hinges and all moving parts.

Q

Temporary protection of parts stored indoors.

Q

Repels water from electrical systems and reconnects electrical contacts.

USE Q

Spray a generous amount onto the surfaces to be treated, leave the product to act for a few seconds.

Q

Leave to dry or wipe with an absorbent cloth.

Q

Depending on the amount of dirt, this operation may be repeated if necessary.

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

06 07 Chemical products

BENEFITS

De-icer - Penetrating oil

Penetrating oil fulfils 6 functions: releasing, tar removal, lubrication, anticorrosion protection, water repellence and friction reduction.

Penetrating oil has been specially designed to penetrate rapidly and effectively into parts that are seized due to oxidation.

COOLING SYSTEM FAST FLUSH Radiator cleaning treatment

PROPERTIES Q

Comprehensive cleaning of the cooling system (flushing, oxidation removal, degreasing).

Q

Cleans the entire cooling system without the need for dismantling.

BENEFITS Q

Harmless to hoses, seals and metals.

Q

Resistant to high temperatures, pressures and vibration.

Q

Does not obstruct the circuit, allowing normal circulation of the coolant.

Q

May be mixed with all commonly used antifreeze and coolant products.

Q

Compatible with all engine types (petrol, diesel, LPG, etc.) and all types of radiator (aluminium, plastic, etc.).

Q

Recommended for use prior to coolant changes.

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Box of 12 x 1 L containers

74 24 042 284

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

Specifications

Values

Colour

Colourless

Density

1.039

pH

2.1

USE Heating set to the open position.

Q Shake the container and pour the product into the cooling circuit.

Q Leave the engine running for 10 minutes or drive a maximum of 100 km, with the heating set to the open position.

Q Allow the engine to cool.

Q Drain and flush out the system with water until it runs clear.

Q Do not leave the product inside the circuit for more than 24 hours.

Q 1 litre will treat a 40 to 50-litre cooling circuit.

Q

BRAKE CLEANER Q

Brake cleaner contains a mixture of chlorine-free solvents for the quick and safe removal of brake fluid, grease, oil, dust and other unwanted residues.

Q

Brake cleaner helps to extend the service life of the brakes and optimise braking performance.

BENEFITS Q

For degreasing and cleaning all parts of the braking system with the aim of improving braking performance: drum, discs, pads, cylinder, linings, calliper.

Q

Reduces brake squeal and clutch clunking.

Q

Does not leave any residue or film.

Q

Has exceptional surface tension for improved penetration of the product through capillary action, thus increasing its performance as a solvent.

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Box of 12 x 600 ml aerosols

74 24 042 241

USE Q

Spray a generous amount onto the surfaces to be treated, leave the product to act for a few seconds.

Q

Leave to dry or wipe with an absorbent cloth.

Q

Depending on the amount of dirt, this operation may be repeated if necessary.

Specifications

Values

Density

0.7

Flash point

< 0°C

Viscosity at +40°C

< 20.5 mm2 /s

APPLICATIONS Q

Suitable for all types of braking system on LCV, HCV and trailers.

Q

Brakes on machine tools.

Q

For use in industrial cold degreasing.

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

08 09 Chemical products

PROPERTIES

Cooling system fast flush - Brake cleaner

Ultra-powerful cleaning degreaser for mechanical parts

WHITE GREASE PROPERTIES Q

High-adhesion grease, water insoluble.

Q

Protects against oxidation and corrosion.

Q

Reduces friction and wear.

Q

Compatible with the most metals and elastomers.

Q

Excellent lubricating performance.

APPLICATIONS All mechanisms require lubrication with grease: - seat runners, - pins, - hinges, - chains, - bearings, etc.

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Box of 12 x 500 ml aerosols

74 24 042 123

Specifications

Values

Colour

White

NLGI grade

2

Effective temperature range

-15°C to +150°C

USE

RECOMMENDATIONS

Clean and dry the surfaces to be cleaned with a product such as brake cleaner.

Q Spray onto the parts requiring lubrication, wipe off any excess.

It is essential to read the Safety Datasheet before use: quickfds.com

Q

SUMMER SCREEN WASH Q

Ready-to-use fluid.

Q

Heavy-duty cleaning power for immediate and perfect vision (low surface tension).

Q

Not damaging to paint or wiper blades.

Q

Compatible with polymer-based materials such as polycarbonates (windscreen), acrylics and elastomers.

Q

With the added power of a "mosquito eliminator" agent, degreasing performance is enhanced.

Q

Contains neither methanol nor isopropanol.

Q

Ethanol-based, produced from sugar cane.

Clear grease - Summer screen wash

PROPERTIES

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

210 L drum

74 24 041 449

Specifications

Values

Appearance

Clear - uniform consistency

Colour

Green

Scent

Apple

RECOMMENDATIONS

Density at 15°C

0.955

It is essential to read the Safety Datasheet before use: quickfds.com

pH

8.0

Surface tension

< 30 mN/m

Freezing point

-3°C

Chemical products

10 11

-20°C READY-TO-USE SCREEN WASH PROPERTIES Q

Ready-to-use fluid.

Q

Heavy-duty cleaning power for immediate and perfect vision (low surface tension).

Q

Not damaging to paint or wiper blades.

Q

Compatible with polymer-based materials such as polycarbonates (windscreen), acrylics and elastomers.

Q

With the added power of a "mosquito eliminator" agent, degreasing performance is enhanced.

Q

Contains neither methanol nor isopropanol.

Q

Ethanol-based, produced from sugar cane.

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Specifications

Values

210 L drum

74 24 041 845

Appearance

Clear - uniform consistency

1000 L IBC

74 24 042 130

Colour

Pink

Density at 15°C

0.955

pH

8.0

Surface tension

< 30 mN/m

Freezing point

-20°C

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

Q

Ready-to-use fluid.

Q

Heavy-duty cleaning power for immediate and perfect vision (low surface tension).

Q

Not damaging to paint or wiper blades.

Q

Compatible with polymer-based materials such as polycarbonates (windscreen), acrylics and elastomers.

Q

With the added power of a "mosquito eliminator" agent, degreasing performance is enhanced.

Q

Contains neither methanol nor isopropanol.

Q

Ethanol-based, produced from sugar cane.

-20°C ready-to-use screen wash

PROPERTIES

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Specifications

Values

Box of 3 x 5 L containers

74 24 041 784

Appearance

Clear - uniform consistency

Colour

Pink

Density at 15°C

0.955

pH

8.0

Surface tension

< 30 mN/m

Freezing point

-20°C

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

Chemical products

12 13

QUICK START Fluid that ensures instant starting for petrol and diesel engines in all weather conditions.

PROPERTIES Q

Guarantees immediate starting of 2-stroke and 4-stroke engines.

Q

Ensures complete combustion and correct running in all weather conditions.

Q

Solution and treatment for starting difficulties due to the presence of water or humidity.

Q

Protects the engine and battery.

Q

Equipped with a multi-position valve.

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Box of 6 x 400 ml aerosols

74 24 047 849

Specifications

Values

Scent

Ethereal

Density

0.74

Flash point

< -20°C

USE

RECOMMENDATIONS

Petrol engine: spray the product into the air filter intake for one second then start the engine.

Q Diesel engine: only use the product while the engine is idling.

Also suitable for smaller capacity 2-stroke and 4-stroke engines (petrol lawnmowers, outboard motors, etc.).

It is essential to read the Safety Datasheet before use: quickfds.com

Q

MULTIFUNCTIONAL LUBRICANT Lubricant for transmission systems and delicate mechanisms

Q

High-adhesion grease, water insoluble.

Q

Protects against oxidation and corrosion.

Q

Reduces friction and wear.

Q

Compatible with the most metals and elastomers.

Q

Excellent lubricating performance.

Quick Start - Multifunctional lubricant

PROPERTIES

APPLICATIONS

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Box of 12 x 500 ml aerosols

74 24 042 274

USE

Specifications

Values

Colour

2

4-ball EP test

> 250 kg

nDm Factor

450,000

Dropping Point

> 180°C

Q

Clean and dry the surfaces to be cleaned with a product such as brake cleaner.

Operating temperature

-30 to +110°C

Q

Spray onto the parts requiring lubrication.

EMCOR corrosion test

0

Oil separation (24 hours at 100°C)

3

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

14 15 Chemical products

All mechanisms require lubrication with grease: seat runners, pins, hinges, chains, bearings, etc.

CONTACT CLEANER Oxidation-removing cleaner for electrical contacts PROPERTIES Electrical contact cleaner with 3 main purposes: degreasing, oxidation removal and protection.

BENEFITS Q

Particularly effective for cleaning electrical or electronic equipment.

Q

Removes oxidation and sulphation from electrical contacts.

Q

Re-establishes dielectric constants and eliminates false contacts.

Q

Dissolves and removes stubborn deposits such as grease, oil, dust and dirt.

Q

Chlorinated solvent-free.

Q

Does not trap dust, non-oily.

Q

Disperses moisture, prevents oxidation.

Q

Removes copper oxide.

Q

Non-harmful to protective lacquer.

Q

Dries very rapidly, leaving surfaces clean and dry.

Q

Supplied with a capillary action tube for accessing specific or difficult-toaccess areas.

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Box of 12 x 500 ml aerosol cans with cobra-style head

74 24 041 848

USE Q

Spray at a distance of 20 cm from the parts to be treated.

Q

Leave to act for 30 to 60 seconds.

Q

Wipe with a dry, clean cloth.

Q

Never work with the power supply connected.

Precaution: Do not use NCE 3 on live equipment or near a heat source or sparks. Ensure that there is sufficient ventilation.

Specifications

Values

Colour

Colourless

Self-ignition point

200°C

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

Comprehensive cleaner/carbon deposit remover for the air circuit PROPERTIES Air circuit carbon deposit remover cleans the air hoses between the compressor and the APM (Air Product Management) and prevents air leaks from the silencer.

Eliminates oil residues and carbon deposits from inside the hoses.

BENEFITS Q

Reduces air leaks from the silencer and safety valve.

Q

Removes water, oil and carbon deposits.

Q

Clears reprogramming errors.

Q

Limits the formation of deposits.

Contact cleaner - Air circuit carbon deposit remover

AIR CIRCUIT CARBON DEPOSIT REMOVER

AVAILABLE AS

USE

Packaging

Part No. Catalogue

Box of 6 x 1 L containers

74 24 047 853

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

No need to remove the hoses: Q Fill the hoses with cleaning product Q Leave to act for 2 hours Q Rinse out with hot water Q Use compressed air to dry the hoses Soaking: Q Remove the air hoses Q Fill the hoses with cleaning product Q Leave to act for 2 hours Q Rinse out with hot water Q Use compressed air to dry the hoses Q Refit the air hoses

Chemical products

16 17

COCKPIT SPRAY Plastics reconditioner for passenger compartments

PROPERTIES For cleaning and reconditioning all plastic surfaces in vehicle passenger compartments.

BENEFITS Q

Fully compatible for paint and lacquers (does not prevent paint application).

Q

Cleans and shines instrument panels, plastic materials.

Q

Anti-static, prevents dust formation.

Q

Protects door rubber trim pieces.

Q

Diffuses a pleasant citrus odour throughout the passenger compartment.

AVAILABLE AS

USE

Packaging

Part No. Catalogue

Box of 12 x 500 ml aerosols

74 24 047 850

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

Spray the product at a distance of approximately 20 cm from the surface to be treated.

Q Allow to dry for a few seconds.

Q Wipe with a soft, dry cloth.

Q Instant shine.

Q On absorbent surfaces, repeat the operation if necessary.

Q Do not apply in direct sunlight or to hot surfaces.

Q

GLASS CLEANER Glass cleaner, foam formula PROPERTIES

Q

Dissolves all oily or dried-on deposits.

Q

Eliminates marks and insect spatter.

Q

Leaves no streaks after use.

Q

Anti-static effect against dust.

Q

Contains no abrasive agents.

Q

Non-drip, may be used on vertical surfaces.

Cockpit spray - Glass cleaner

Glass cleaner: foam formula

APPLICATIONS Cleaning of vehicle parts such as the windscreen, side windows, rear screens, rear-view mirrors, headlight lenses, radiator grilles, etc.

AVAILABLE AS

TECHNICAL DATA

Packaging

Part No. Catalogue

Box of 12 x 500 ml aerosols

74 24 047 855

Specifications

Values

Density at 20°C

0.999

pH

10.5

Propellant gas

Propane

USE Q

Shake the aerosol can well before use.

Q

Spray onto the parts to be treated.

Leave to act for a few seconds.

RECOMMENDATIONS

Wipe in a circular motion using a soft, dry cloth.

It is essential to read the Safety Datasheet before use: quickfds.com

Q

18 19 Chemical products

Q

AEROSOL PAINTS Primers / Lacquer / Binder Clearcoat / Rim Silver / Primer Shade PROPERTIES The eXtended range consists of six product families designed for fast and economic repairs to vehicle body paintwork, and optimum quality maintenance.

BENEFITS The eXtended paint range incorporates many features for the benefit of users.

The aerosol system allows for a more rapid application than using a paint gun.

The user therefore spends less time on additional tasks.

Benefits

Specifications

Quality

Optimal result and product quality similar to original paintwork applied with a paint gun.

Ease of use

eXtended fast-drying special resin-based paint range to protect and renovate sheet metal, metal and plastic surfaces, quickly and easily.

Technology

2K component technology combining paint and hardener.

Durability

Resistant and long-lasting product.

Economy

Ready-to-use spray saves time and money.

Design

Colour shades approved by Renault Trucks.

Painting with a paint gun

Spray painting

100 %

100 %

Primer application Q Product preparation.

Q Masking of the component.

Q Cleaning the paint gun

100 %

40 % Q No product preparation.

Q Less masking required.

Q No paint gun cleaning required

Sanding/Primer degreasing

100 %

100 %

100 %

40 % Q No product preparation.

Q Less masking required.

Q No paint gun cleaning required

System

Filling/Sanding

Finishing paint application Product preparation.

Q Masking.

Q Cleaning the paint gun Q

2K Grey acrylic primer

PRODUCT PART NUMBERS Packaging

Part No. Catalogue

74 24 042 627

Dark grey colour primer shade

74 24 042 628

Colour shade 2K clearcoat

Single-pack primer

Binder clearcoat

Beige - Finishing spray paint

74 24 042 629

White 01326 - Manufacturer colour shade

74 24 042 345

White 00389 - Manufacturer colour shade

74 24 042 515

White EKLA RT 09350 - Spray

74 24 042 335

PURE White AK - RAL9010 GLOSS - Spray

74 24 042 298

Grey 04636 - Spray

74 24 042 332

Grey 20521 - Manufacturer colour shade

74 24 042 534

Grey 03630 - Manufacturer colour shade

74 24 042 389

Grey 03650 - Manufacturer colour shade

74 24 042 391

Grey 00656 - Manufacturer colour shade

74 24 042 456

Wheel rim grey 00656 - Finishing spray paint

74 24 042 626

Bumper grey 20550 - Finishing spray paint

74 24 042 325

Dark black AK - RAL9005 GLOSS - Spray

74 24 042 292

Dark black - RAL9005 SATIN - Spray

74 24 042 621

Dark black - RAL9005 MAT - Spray 400 ml

74 24 042 546

Black 02606 - Manufacturer colour shade

74 24 042 466

Red 01708 - Paint

74 24 042 488

Red 01733 - Manufacturer colour shade

74 24 042 508

RECOMMENDATIONS It is essential to read the Safety Datasheet before use: quickfds.com

Plastic primer

20 21 Chemical products

Light grey colour primer shade

Aerosol paints

Primer/Primer shade Silver wheel rim spray

NOTES

Chemical products

Notes

NOTES

22 23

renault-trucks.com

03/2021

We recommend Renault Trucks Oils.

Dimensions and specifications are provided for guidance only.

The manufacturer reserves the right to change them without prior warning.

Renault Trucks SAS with a capital of €50,000,000 - 954 506 077 RCS Lyon