Page 1

ELECTRONICS ProDUKTIONSHJÆLPEMIDLER


2


3


Soldering and desoldering stations

Entry line Soldering Stations system/ PART NO

description

nominal power

total peak power

temp. selection between

BD-2BA BD-2SA

Digital soldering station with 2-lines readout display and menu for modification of values from original setting

75W

60/140 W

90-450 °C

CD-2BA

Soldering station 230V For general electronics jobs. Includes control unit BD, handpiece T245-A, cartridges C245-003 and C245-007

75W

140 W

90-450 °C

CD-2SA

Soldering station 230V For high precision solder joints. Incudes control unit BD, handpiece T210-A, cartridge C210-001 and 210-008

75W

60 W 140 W

90-450 °C

nominal power

total peak power

temp. selection between

75W

140 W

90-450 °C

2 x 20W

2 x 40 W

90-450 °C

Single line Soldering Stations system/ PART NO

description

CF-2A

Solder feed station 230V Designed for repetitive soldering or when you need a free hand. Equiped with solder feed iron of 1mm diameter. Includes AP control unit, AP-A solder feed iron, C130-403 cartridge.

CP-2A

Micro tweezers station 230V For soldering and desoldering SMD components with micro-tweezer. Includes control unit PA, PA-A micro hot tweezers and 2 x C120-002 cartridge.

Single line Desoldering Stations system/ PART NO

4

description

nominal power

total peak power

temp. selection between

CS-2A

Electric system 230V Electric suction system powered by control unit DSV or electric vacuum pump MS-A. Includes control unit DSV, DS-A micro desoldering iron with tip C360-004, MS-A electric vacuum pump.

20W

30 W

300-450 °C

CV-2A

Pneumatic system 230V Pneumatic suction system with dial for temperature selection. Includes control unit DSV, DS-A micro desoldering iron with tip C36-004, pneumatic suction system feeded by compresed air max 6 bar.

20W

30 W

300-450 °C

Sweden – OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 | Fax: +46 75 242 45 09 info@oemelectronics.se | www.oemelectronics.se

Finland – OEM Electronics OY Fiskarsinkatu 3 FI-20750 Turku Phone: +358 207 499 300 | Fax: +358 207 499 496 info@oemelectronics.fi | www.oemelectronics.fi

Poland – OEM Electronics PL ul. Postepu 2, PL-02-676 WARSZAWA Phone: +48 22 863 27 22 | Fax: +48 22 863 27 24 info@oemelectronics.pl | www.oemelectronics.pl


Soldering and desoldering stations

DIT and DIR Soldering Stations, one channel system/ PART NO

nominal power

description

total peak power

temp. selection between

weight

DIT-2A

Soldering station 230V For general electronic applications. Includes control unit DI-2A, stand AD-SA, soldering iron T245-A and cartridge C245-003

75 W

140 W

300-450 ºC

2 kg

DIR-2A

Soldering station 230V For high and medium precision solder-joints. Includes control unit DI-2A, soldering iron T210-A, cartridge C210-001 ad stand AD-SA

75 W

140 W 60 W

300-450 ºC

2 kg

DIS Desoldering Station system/ PART NO

nominal power

description

total peak power

temp. selection between

weight

DIS-2A

Desoldering station 230V. For desoldering insertion componenets and cleaning circuits with SMD components. Includes control unit DI-2A, desoldering iron with tip C560-003, stand DR-SA, MS-A suction module electric system and accessories set.

75 W

140 W

300-450 ºC

2 kg

DSS-2A

Micro desoldering station 230V. For desoldering small and medium-sized insertion components; high-precision station with small measurements. Includes control unit DI-2A, desoldering iron DS-A with tip C360-004, stand DS-SA, MS-A suction module electric system and accessories set.

75 W

140 W

300-450 ºC

2 kg

DIN Nitrogen Soldering Station 230V system/ PART NO

DIN-2A

nominal power

description The DIN-2A nitrogen soldering station combines 2 ways of transferring heat: - By direct contact between the solder tip and the solder joint, just like a normal soldering iron. - By nitrogen which is heated when flowing through the soldering tip. Includes DI-SA control unit, stand DN-SA, nitrogen handpiece T245-NA with C245-003. MN-A nitrogen flow regulator. N2 flow regulation:: 0,5-3,5 LPM at 5 Bar.Max pressure:6 Bar.

75 W

total peak power

140 W

temp. selection between

90-450 ºC

weight

1,2 kg

An externa nitrogen circuit is needed or the nitrogen generator from JBC GN-A

GN-A Nitrogen module generator SYSTEM/PART.NO

GN-A

Description • • • •

Compressed air pressure: 4 to 6 Bar Gas N2 concentration: up to 99,9% Concentraded N2 gas flow: 1 to 2 NL/min. Weight: 2 kg

Norway – OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 | Fax: +46 75 242 45 09 info@oemelectronics.se | www.oemelectronics.se

denmark – OEM AUTOMATIC KLITSØ A/S Engholm Parkvej 4 DK- 3450 Allerød Phone: +45 70 10 64 00 | Fax: +45 70 10 64 info@oemklitso.dk | www.oemklitso.dk

The Baltics – OEM Eesti OÜ Kanali tee 1-328, EE-10112 Tallinn Phone: +372 6550 871 | Fax: +372 6550 873 info@oem.ee | www.oem.ee

5


Soldering and desoldering stations

DDST Rework Station system/PART NO

DDST-2A

description

nominal power

total peak power

Sleep mode power

Soldering and desoldering station 230 V The station offers a complete solution for fast and safe repair of insertion component circuits by suction of hte solder. The station can also be used for cleaning pads in SMD circuits.

2 x 75W

2 x 140W

Hibernation mode power

2 x 10W

temp. selection between

weight

2 x 4W

4.5 kg

air flow regulation

protected against antistatic discharge

90-450 °C

includes Control unit DD-2A Handspiece T245-A Cartridge C245003 Desoldering DR-A Tip C560-003 Stand AD-SA and DR-SA Suction electrical system MS-A Set of tools and accessories

JT High Power Hot Air Station 230 V system/PART NO

JT-2A

description

maximum power

A high power hot air station used for desoldering all types of SMD's. Its powerful heater desolders even the biggest QFPs and PLCCs quickly and safely. Desoldering small and mediumsized BGAs is done in a very short time.

1000 W

includes JT-2A

includes JT-2QA

Control unit JTE-2A Heater 1000 W Extractor stand with 5 extractors, 5 protectors and 2 tripods Heater stand Set of accessories

Control unit Stand Heater handle 1000 W No accessories

Temp. selection

°C

temp. room

room 450°C and "cool"

6-45 l/min

Yes

Total weight

8,7 kg

TE Hot Air Station 230V system/PART NO

TE-2A

6

description A precision hot air station ideal for soldering and desoldering small and medium-sized SMD components. Autonomus hot air station, digital, thermo regulated with air flox control.

includes TE-2A

includes TE-2Qa

Control unit JTE-2A Heater 300 W Heater stand JT-SA Accessories Extractor stand with 2 tripods, 3 extractros and 5 protectors

Control unit Stand Heater handle 300 W No accessories

Sweden – OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 | Fax: +46 75 242 45 09 info@oemelectronics.se | www.oemelectronics.se

Power max out

Temp. selection

variable air flow settings

total weight

300 W

room 450°C and "cool"

between 4 and 11 l/ min

6,7 kg

Finland – OEM Electronics OY Fiskarsinkatu 3 FI-20750 Turku Phone: +358 207 499 300 | Fax: +358 207 499 496 info@oemelectronics.fi | www.oemelectronics.fi

90-450 °C

Poland – OEM Electronics PL ul. Postepu 2, PL-02-676 WARSZAWA Phone: +48 22 863 27 22 | Fax: +48 22 863 27 24 info@oemelectronics.pl | www.oemelectronics.pl


Soldering and desoldering stations

HD Heavy Duty Station 230 V system/PART NO

description

nominal power

total peak power

sleep mode

hibernations mode

145 W

270 W

20 W

9W

90-500ºC

4,5 kg

temp. range

weight

Ideal solution for high thermal demand and prolonged heavy duty soldering applications. Specifically designed for extensive soldering of multi-layerd circuits and parts which require high remperatures.

HD-2A

temp. range

weight

includes Control unit HD-2A Handspiece T245-A Cartridge C470003 Stand AD-SA

AL Automatic Solder Feed Station 230 V system/PART NO

description

Ideal solution for extensive soldering application, and any soldering application that requires one or two free hands.

AL-2A

nominal power

total peak power

sleep mode

hibernations mode

Solder wire diamters

75 W

140 W

10 W

4W

0,5 - 1,5 mm

90-500ºC

3,2 kg

includes Control unit AL-2A Complete handle AL-A Cartridge C250403 Stand AL-SA Tubes set and guides for: wires ø 0,9 - 1 mm: 00024101

AL-IA Hands-free soldering arm for soldering iron AL product

Description

AL-IA

Part no

Indispensable for using the AL system while having both hands free. For this purpose it is also necessary to use the pedal set

0964551

AM Rework Station 230 V system/PART NO

AM-2A

description

nominal power

peak power

Designed for rework and repair of through-hole and SMT boards. The station´s 4 modules offer the following rework/repair operations: - Desoldering of SMD components of any size by hot air. - Desoldering SMT and through-hole components. - Pick & Place tip for placing components. - Soldering of any kind of components.

2 x 75 W

2 x 140 W

includes Control unit AM-2A T245 handpiece with cartridge C245003 DR-A desoldering iron with the C560-003 tip heater 1000W. MP 2260 Pick & Place Extractor stand with.5 extractors, 5 prtectors and 2 tripods. Stands for soldering iron, desoldering iron and heater. Set of accessories.

Norway – OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 | Fax: +46 75 242 45 09 info@oemelectronics.se | www.oemelectronics.se

Air flow regulation

6-45 l/min

Vacuum pump for holding ICs

x

weight

8,1 kg

Power hot air unit

soldering iron temp range

desoldering iron temp range

hot air temp. range

900 W

90-450ºC

300-450ºC

150-450ºC

sleep mode

2 x 10 W

denmark – OEM AUTOMATIC KLITSØ A/S Engholm Parkvej 4 DK- 3450 Allerød Phone: +45 70 10 64 00 | Fax: +45 70 10 64 info@oemklitso.dk | www.oemklitso.dk

hibernations mode

2x6W

The Baltics – OEM Eesti OÜ Kanali tee 1-328, EE-10112 Tallinn Phone: +372 6550 871 | Fax: +372 6550 873 info@oem.ee | www.oem.ee

7


Soldering and desoldering stations

NAST Nano Station 230 V system/PART NO

NAST-2A

nominal power

description A complete station designed for micro soldering and desoldering of small-size components like chips 0201, 0402 etc.

peak power

15W

temp regulation

weight

30W

90-450 °C

2.6 kg

hibernation power

temp. selection

weight

includes Control unit NA-2A Nano soldering iron NT205-A Nano tweezers NP105-A Cartridge set (10 pcs)

DI-2A 1 Tool Control Unit system/PART NO

DI-2A

Nominal power

description 1-tool digital control unit features a digital read-out display for accurate temperature and tool control.

75 W

peak power

sleep power

140 W

10 W

4W

sleep power

90-450 °C

2 kg

temp. selection

weight

for a complete station following is needed Control unit One tool with corresponding stand & cartridge

DD and DM 2- & 4- Tools digital Control Units description

nominal power

total peak power

DD-2A

2 tools control unit 230 V Offers connectivity for working with 2 tools simultaneously.. Designed for production and rework applications with high thermal requirements.

2 x 75W

2 x 140W

2 x 10W

2 x 4W

90-450 °C

3,5 kg

DM-2A

4 tools control unit 230 V Offers connectivity for working with 4 tools simultaneously.. Designed for production and rework applications with high thermal requirements.

4 x 75W

4 x 140W

4 x 10W

4 x 4W

90-450 °C

4,5 kg

system/PART NO

hibernations power

for a complete station following is needed Control unit From 1 to 4 tools with its corresponding stand & cartridge

8

Sweden – OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 | Fax: +46 75 242 45 09 info@oemelectronics.se | www.oemelectronics.se

Finland – OEM Electronics OY Fiskarsinkatu 3 FI-20750 Turku Phone: +358 207 499 300 | Fax: +358 207 499 496 info@oemelectronics.fi | www.oemelectronics.fi

Poland – OEM Electronics PL ul. Postepu 2, PL-02-676 WARSZAWA Phone: +48 22 863 27 22 | Fax: +48 22 863 27 24 info@oemelectronics.pl | www.oemelectronics.pl


Soldering and desoldering stations

MS-A and MV-A Desoldering Suction Modules system/PART NO

description

power

supply

typical surface resistance

recommended air pressure

weight

MS-A

MS-A electric suction module Electric suction module with overdrive startup funtion that offers quick collection of solder before it cools down. This suction system is regulated by the control unit.

12 W

24 V

1015-1011

-

1,7 kg

MV-A

MV-A pneumatic suction module This pneumatic suction module uses compressed air and a Venturi valve. This system offers outstanding desoldering results because of its immediate suction responsiveness. This suction system is powered by compressed unit.

3W

24 V

1015-1011

5 Bar (max 6)

1,4 Kg

Cleaning of Tips Cleaning sand CL6780 Tip tinner TT-A For chemical cleaning and tinning the tip at the same time. Very efficient.

Stand

The most "aggressive" method to clean even the most oxidated tips.

Metal wool CL6205 Dry cleaning method, indispensable for lead-free soldering. Removes oxidation and facilitates tinning.

Metal brush CL6217 Cleans tips, tweezers and desoldering irons the same way as metal wood.

Stand accesory + sponge S7080

Dry cleaning system + Metal wool CL6760 Dry cleaning + sand CL6780

Norway – OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 | Fax: +46 75 242 45 09 info@oemelectronics.se | www.oemelectronics.se

denmark – OEM AUTOMATIC KLITSØ A/S Engholm Parkvej 4 DK- 3450 Allerød Phone: +45 70 10 64 00 | Fax: +45 70 10 64 info@oemklitso.dk | www.oemklitso.dk

The Baltics – OEM Eesti OÜ Kanali tee 1-328, EE-10112 Tallinn Phone: +372 6550 871 | Fax: +372 6550 873 info@oem.ee | www.oem.ee

9


Stands and Tools

10

system/PART NO

for handpiece

includes

AD-SA

• T210-A • T245-A

• • • •

PA-SA

• For PA-A micro hot tweezers

• Sponge stand • Sleep mode

DR-SA

• For DR-A desoldering iron

• Brush and sponge stand • Sleep mode

AP-SA

• For AP-A solder feed iron

• Sponge stand • Sleep mode

HT-SA

• For HT-A hot tweezers

• Sponge stand • Sleep mode

AD-SA

• For AP-A solder feed iron

• Sponge stand • Sleep mode

HT-SA

• For HT-A hot tweezers

• Sponge stand • Sleep mode

DS-SA

• For DS-A micro desoldering iron

• Brush and sponge stand • Sleep mode

Dry cleaning module with metal wool 3 cartridges extractor magazine for C210 or C245 Quick cartridges change Sleep mode

tools

system/PART NO

descriptiion

NANO The smallest soldering tools available in the market

• NP-A

• Uses cartridges C105 • Perfect for soldering and desoldering very smal-sized chip components.

• NT-A

• Uses cartridges C105 • For high-precision soldering jobs

Handpiece

• T-210-A

• For precision applications • Used with C210 cartridges • Offers quick cartridge change

T245 Handpiece For general soldering jobs in electronics

• T-245

• Offers quick cartridge change

• T245-FA

• A screw in this handpiece allows fixation of cartridges, ideal for high-intensity jobs that do NOT require frequent change of cartriges.

T245 Comfort handpieces Same characteristics as T245. Neoprene grip, thermally isolating and giving more comfort to the user. Ideal for intensive soldering.

• T245-CA

• Quick cartridge change

• T245-TA

• Handpiece incorporates a screw that allows to fix the cartridges • Ideal for high intensity jobs where NO cartridge change is needed

• T245-SA

• A screw in this handpiece helps to securely fix the cartridge, ideal for extensive soldering jobs that do NOT require frequent cartridge changes. Supplied with a cable of 3 m lenght.

Sweden – OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 | Fax: +46 75 242 45 09 info@oemelectronics.se | www.oemelectronics.se

Finland – OEM Electronics OY Fiskarsinkatu 3 FI-20750 Turku Phone: +358 207 499 300 | Fax: +358 207 499 496 info@oemelectronics.fi | www.oemelectronics.fi

Poland – OEM Electronics PL ul. Postepu 2, PL-02-676 WARSZAWA Phone: +48 22 863 27 22 | Fax: +48 22 863 27 24 info@oemelectronics.pl | www.oemelectronics.pl


Tools and Cartridges

tools

system/PART NO

description

• PA-A

• • • • •

• HT-A

• Specially for soldering and desoldering small and medium-sized SMD components. A cable strip cartridge is also available. • Each cartrdge is individually controlled by the control unit, guaranteeing fast heating-up, accuracy and recovery of temperature. • Conntcted to JBC station DI, DD, DM AM and single line AP

• DS-A

• • • •

Adapts to the ever-decreasing size of new components. Very easy cleaning and maintenance. Tips are easily inserted by gentle pushing Contacted to JBC stations DS-2A, DV-2A, DI, DD, DM, AM and single line AP Supplied with tip C360-004

• DR

• • • •

Very easy cleaning and maintenance Two different types of solder residue chambers are available: metal and glass Tips are easily palced by thread Supplied with tip C560-003

• AP-A

• Offers a "third hand" by feeding soldering wire from diamters 0.8 to 1 mm. Specifically helpful for high-volume soldering jobs, and whenever an extra hand is needed. • Connected to JBC stations DI, DD, DM, AM and single line AP • Supplied wiht cartrigde C130-403

• SN5450

• Solder reels for AP-A • The soldering irons are fitted with lead free solder reel - 99% Sn/0.3% Ag/0.7 Cu - with 50g solder.

Microtweezers

Tweezers

Microdesoldering irons

Desoldering iron

Soldering wire feeding iron

Solder reels

Designed for soldering and desoldering SMD micro components Each cartridge is individually controlled by the control unit, guaranteeing fast heating-up, accuracy and recovery of temperature The available range of cartridge is made for desoldering a wide range of components. Connected to JBc stations, DI, DD, DM, AM and single line AP. Supplied without cartridges.

Cartridges

Norway – OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 | Fax: +46 75 242 45 09 info@oemelectronics.se | www.oemelectronics.se

denmark – OEM AUTOMATIC KLITSØ A/S Engholm Parkvej 4 DK- 3450 Allerød Phone: +45 70 10 64 00 | Fax: +45 70 10 64 info@oemklitso.dk | www.oemklitso.dk

The Baltics – OEM Eesti OÜ Kanali tee 1-328, EE-10112 Tallinn Phone: +372 6550 871 | Fax: +372 6550 873 info@oem.ee | www.oem.ee

11


Cartridges

12

Sweden – OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 | Fax: +46 75 242 45 09 info@oemelectronics.se | www.oemelectronics.se

Finland – OEM Electronics OY Fiskarsinkatu 3 FI-20750 Turku Phone: +358 207 499 300 | Fax: +358 207 499 496 info@oemelectronics.fi | www.oemelectronics.fi

Poland – OEM Electronics PL ul. Postepu 2, PL-02-676 WARSZAWA Phone: +48 22 863 27 22 | Fax: +48 22 863 27 24 info@oemelectronics.pl | www.oemelectronics.pl


Work Environment


Filter System The world technical leader in air pollution systems Filtronic's business concept is to develop and manufacture mobile filter systems by creating a better workbench environment and protect individuals and products from hazardous gases and particles.

High Airflow Systems

Extract Arm Concept

14

Sweden – OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 | Fax: +46 75 242 45 09 info@oemelectronics.se | www.oemelectronics.se

CBC-Clean Bench Concept

High Vacuum Systems

Finland – OEM Electronics OY Fiskarsinkatu 3 FI-20750 Turku Phone: +358 207 499 300 | Fax: +358 207 499 496 info@oemelectronics.fi | www.oemelectronics.fi

Poland – OEM Electronics PL ul. Postepu 2, PL-02-676 WARSZAWA Phone: +48 22 863 27 22 | Fax: +48 22 863 27 24 info@oemelectronics.pl | www.oemelectronics.pl


Filter System

system

MG 75

MG 95

MG 100

MG 200

MG 400

max suction capacity m3/h

description

High efficiency fume extraction with a wide range of filters depending on applications. It meets the demands for work in cleanroom. The MG75 is a filter unit with connection for one extraction arm. Remote control for variable speed, filter lifetime indication and alarm functions.

75

Microfiler separation degree DOP%

Gas filter-chemisorbtionseparation degree %

remote control

power size (WHD)

weight

Voltage

100

38-49

>99.97

>95 100/250V

100

Fume extraction system with high efficiency filter. Connection for one or two arms. The system can be set in variable speed and has an alarm function for filter lifetime indication.

100

High efficiency fume extraction system with integrated pre filter and a combined particle and gas filter. Wide range of filters depending on application. Meets the demands for work in cleanroom. Remote control for filter lifetime indication, variable speed and alarm functions.

sound level dB(A), at 1 m.

Yes 465mm 640mm 220mm

38-50

>99.97

Accessory

Yes 465mm 640mm 220mm

>95

100W <52

>99.97

>95

100/250V

Accessory

460mm 640mm 210mm

No 15 kg Accessory

300W 200

310

<55

>99.95

>95 115/230V

450

>55

99.97

>95 115/230V

100-1000-ESD 100-1032-ESD 100-1055-ESD

Yes 400mm 1016mm 402mm

43 kg

200-1000-ESD Yes

300W 400

950-1000-ESD 950-1010-ESD

18 kg

100/250V

140

750-1000-ESD 750-1010-ESD

15 kg

100 140

part no Pre filter

100

High efficiency fume extraction with a wide range of filters depending on applications. It meets the demands for work in cleanroom. The MG95 is a filter unit with connection for one or two extraction arms. Remote control for variable speed, filter lifetime indication and alarm functions.

High efficiency fume extraction system with integrated pre filter and a combined particle and gas filter. Wide range of filters depending on application. Meets the demands for work in cleanroom. Remote control for filter lifetime indication, variable speed and alarm functions.

Blower capasity m3/h

Yes 796mm 1016mm 402mm

68 kg

450-1000-ESD Yes

Accessories System

description

technical data

Pre-filter

• A pre-filter for the high airflow systems MG 75, 95 and 100. • The pre filter is mounted on the filter system. • The filter media is of a “bag” type model with a high separation degree.

Pre filter bag active area 25 dm² Pre filter bag Class F8

PF-1200

Trolley

• Trolley for MG75 and MG95. An easy solution to get the filter system even more mobile. Arm brackets for the extraction arm is included

450 x 450 x 750 mm (WxDxH))

950-3202-EDS

Bench mounting set

• Bench mounting set for MG100. To be mounted on the edge of the workbench.

Remote control

• Remote control to MG units .

Connection hose

• Connection hose with quick-connection, aluminium covered Available from 1-5 meter length.

Norway – OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 | Fax: +46 75 242 45 09 info@oemelectronics.se | www.oemelectronics.se

Part no

780-3001-ESD 700-3057

denmark – OEM AUTOMATIC KLITSØ A/S Engholm Parkvej 4 DK- 3450 Allerød Phone: +45 70 10 64 00 | Fax: +45 70 10 64 info@oemklitso.dk | www.oemklitso.dk

ø 65 mm (diameter)

On request

The Baltics – OEM Eesti OÜ Kanali tee 1-328, EE-10112 Tallinn Phone: +372 6550 871 | Fax: +372 6550 873 info@oem.ee | www.oem.ee

15


BYRÅN I TRANÅS 2010

Denmark OEM AUTOMATIC KLITSØ A/S Engholm Parkvej 4 DK- 3450 Allerød Phone: +45 70 10 64 00 Fax: +45 70 10 64 10 info@oemklitso.dk www.oemklitso.dk

Norway OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Sverige Phone: +46 75 242 45 00 Fax: +46 75 242 45 09 info@oemelectronics.se www.oemelectronics.se

POLAND OEM Electronics PL ul. Postepu 2 PL-02-676 WARSZAWA Phone: +48 22 863 27 22 Fax: +48 22 863 27 24 info@oemelectronics.pl www.oemelectronics.pl

SWEDEN OEM Electronics AB P O Box 1025 (Norrabyvägen 6B) SE-573 29 Tranås Phone: +46 75 242 45 00 Fax: +46 75 242 45 09 info@oemelectronics.se www.oemelectronics.se

FINLAND OEM Electronics OY Fiskarsinkatu 3 FI-20750 Turku Phone: +358 207 499 300 Fax: +358 207 499 496 info@oemelectronics.fi www.oemelectronics.fi

The Baltics OEM Eesti OÜ Kanali tee 1-328 EE-10112 Tallinn Phone: +372 6550 871 Fax +372 6550 873 info@oem.ee www.oem.ee

OEM Automatic Klitsø - Electronics Produktionshjælpemidler  

OEM Automatic Klitsø Electronics

Read more
Read more
Similar to
Popular now
Just for you