JUPITER STIRRUP MOUNT BRACKET KIT INSTRUCTIONS Issue 01 on 20th September 2021 These instructions are in addition to the standard luminaire & attachment instructions that were supplied with the product you have purchased. They should be read carefully & the attachment luminaire installed as per instructions, then pass on to the appropriate person for retention for future reference & maintenance. INSTALLATION - STIRRUP MOUNT BRACKET KIT
Fig 1.
This is designed to be used with the Jupiter fittings: 1. Use the strirrup mounting bracket to mark up the required fixing points on a suitable surface to support the weight of the fitting. 2. Secure the stirrup mounting bracket in place using a suitable fixing method. 3. Using the allen key headed screws and washers provided in a small plastic bag, locate and secure the stirrup bracket onto the driver assembly N.B. allow for adjustment (Fig 1.) 4. Adjust the fitting to the required position and lock into place by fully tightening the allen key head screws on both sides
Stirrup Mount Bracket Fixing Centres