Photographer : Peter Lintner
Location : Germany Board : NSP Premium Race Board Bag
ACCESSORIES
NSP CONTENTS
• PADDLE RANGE OVERVIEW
• PADDLE BAG
• RTM TECHLONOGY FINS, GLASS FINS
• NYLON FINS
• PERFORMANCE FINS
• RACE FINS
• RACE BOARD BAGS - PREMIUM RACE BOARD BAG
• SURF BOARD BAGS
• TRIPLE BOARD BAGS
• SUP BOARD BAGS
• FOIL BAGS
• FOIL KIT BOARD BAGS SINGLE & DOUBLE
• PREMIUM BACKPACK
• DELUXE BACKPACK
• BOARD SOCKS
• TIE DOWN STRAPS - ROOF RACK PADS
• SOFT ROOF RACKS - SINGLE
• SOFT ROOF RACKS - DOUBLE
• SURF/SUP LEASH
• SUP COIL
• WAIST BELT - RAIL TAPE - MFC FOOTSTRAPS
• RESCUE BOARD
• TRACTION PADS
• FRONT WINGS
• REAR WING - MODULAR KIT
• FUSELAGE & TUNING SHIMS
• AIRWAVE ACCESSORIES
• AIRWING ACCESSORIES
• BOUYS, BANNER, BEACH FLAG, TENT
• FISHERMAN SEAT
•OUR STORY
•SOCIAL MEDIA INSTAGRAM
Perfect for hardcore endurance athletes, reduced diameter (RDM) shafts work for any paddler wanting a scaleddown shaft for their racing - these high-performance are not just for kids and women.
Rider From Left: Kota Nakao Misono Sakaguchi
Sumika Minamoto
Yusuke Hyogo
RTM TECHNOLOGY
(Resin Transfer Moulding) : Lightweight performance core side fins offering great flex, speed, maneuverability and responsiveness; these can be used in a variety of allround surf conditions. Available in 3 side bites J3 (112.5mm), J5 (115mm), J7 (120 mm)
J3 FTU
Position : Center/ Left / Right
Length : 112.5 mm
J7 FTU J5 FTU
Position : Center/ Left / Right
Length : 115.0 mm
WAVE 6”
Position : Center/ Left / Right
Length : 120.0 mm
RTM Technology with high-performance core construction for speed, drive and maneuverability. •NAFI0511
HATCHET 9”
Position : Center
Length : 226.0 mm
Position : Center Length : 226.0 mm
GLASS FIN
8’’ COCOMAT
Our eco-friendly composite fin is made from coconut husks and matches perfectly with our CocoMat and CocoFlax surf and SUP boards. Strong, durable and made to perform.
Position : Center
Honeycomb performance series thruster side fins for those looking to up their game and for greater maneuverability in all surf conditions.
PERFORMANCE SERIES
PERFORMANCE SERIES
PERFORMANCE SINGLE FIN
Honeycomb high performance fins for sup and surfing in all conditions.
PERFORMANCE SERIES SIDE FINS
PERFORMANCE SERIES QUAD
TR 4.7 SERIES 8” SERIES 9” SERIES 10”
PERFORMANCE SINGLE FIN
PERFORMANCE SINGLE FIN
Draft length: 200mm
RACE FINS NSP
RACE 20
Draft length: 202mm
Designed and developed exclusively for NSP by Keith McCulloch and Mike Wazenski
SURF RACE 20
Designed by Titouan Puyo, Travis Grant, Marcus Hansen, Alain Teurquetil and Trent Pedersen, the Surf Race fin is the final result of several iterations being developed parallel to the NSP racing program.
For beach racing, buoy racing and the ability to pull off consistent kick turns in the middle of a race, the NSP Surf Race 20 is the more appropriate fin. Or in Travis’s words; it’s the fin better suited for turning and surfing.
The Surf Race 20 fin comes standard with all NSP Puma boards.
Length: 200mm
RACE 22 RACE 24
Draft length: 220mm
Draft length: 240mm
Designed and carefully crafted to deliver the desired fin properties required in SUP racing: tracking, stability, efficiency, speed and acceleration. Suitable for pros and intermediates alike, these performance fins have been optimized to maximize efficiency:
Design Features:
• Foil design is optimized specifically for the speeds of SUP R ace board
• Forgiving foil design that minimizes drag even at high angles of attack
• Plan form minimizes tip vortices’s while stabilizing the boar d at speed
• Flex properties produce smooth and stable board reactions, even in chop, bumps and rough conditions
• Light weight and strong
• Available in three sizes to best suit your boar d size, strength, weight and conditions
RACE BOARD BAGS
(4 mm)
PREMIUM RACE BAG
• 4 mm padding with extra 2 mm protection zones on nose and tail
• Side walls reinforced with 600D
• Mesh air vent
• Lockable heavy duty rust-free zipper
• Carry handles on tail, side and top
• Velcro fin slot
• Center line compression strap compliments the existing rail strap to keep your board snug while traveling.
SURF BOARD BAGS
Day (4 mm)
• Heat and water resistant polysack.
• Padded carry handle.
• Detachable padded shouldestraps.
• Fin slots included on all SUP bags and for surf longboard bags.
• Lockable heavy duty zipper.
• Reinforced with 600 D fabric on the nose of 8 mm bags.
Travel (8 mm)
Surf Day 6’0”
Surf Day 7’0’’
Surf Day 7’4’’
Surf Day 7’10’’
Surf Day 8’6’’
Surf Day 9’6’’
Surf Day 10’0’’
Surf Day 11’0’’
193” x 62 cm
218” x 64 cm
229” x 68 cm
249” x 68 cm
270” x 68 cm
299” x 70 cm
317” x 74 cm
349” x 78 cm
•NABB0806 •NABB0807 •NABB0808 •NABB0809 •NABB0810 •NABB0811 •NABB0859 •NABB0812
Surf Travel 6’0”
Surf Travel 7’0’’
Surf Travel 7’4’’
Surf Travel 7’10’’
Surf Travel 8’6’’
Surf Travel 9’6’’
Surf Travel 10’0’’
Surf Travel 11’0’’
x 79 cm
•NABB0829 •NABB0830 •NABB0831 •NABB0832 •NABB0833 •NABB0834 •NABB0862 •NABB0835
Fish, Hybrid 5’6” / 6’0” Funboard, Fish, Hybrid 6’2”/6’4”/6’6”/ 6’8”/7’0” Funboard, Fish, 7’2”/7’4” Funboard, 7’6”/7’10”
Longboard 8’0”/8’2”/8’4”/8’6” Longboard 9’0”/9’2”/9’6” Longboard 9’8”/10’0” Longboard 10’0”/10’2”/11’0”
TRIPLE BOARD BAGS
Going on a surf holiday, competing in the next WSL event or are you a sales rep that needs to carry a lot of boards?
Now you can easily carry up to three boards in one Triple bag. The triple board bag is constructed with heavy duty fabric and rust-free zippers. Don’t be afraid to drag the bag behind you while running through the airport, the Triple board bag comes equipped with highly durable drag protective rails.
• Made to safely stow up to three boards.
• Coffin sidewall.
• 10 mm dual density foam padding.
• Heavy duty polyester outer layer with 1680D Nose and Tail reinforcement.
• Internal dividers to keep your boards safe.
• 2 interior compression straps to keep your boards tied down.
• 2 exterior compression straps.
• Adjustable shoulder strap.
• Heavy duty, rust-resistant zippers.
Adjustable shoulder strap
Scuff resistant drag
Exterior compression straps
1680D nose and tail reinforcement
2 interior compression straps
SUP BOARD BAGS
Day (4 mm)
Travel (8 mm)
SURF BOARD BAG
• Heat and water resistant polysack.
• Padded carry handle plus center handle on travel bag for easy carrying of wider boards (except SUP Surf bags).
• Detachable padded shoulder straps.
• Fin slots included on all SUP bags and for surf longboard bags.
• Lockable heavy duty zipper.
• Name slots on all boards.
• Air vent on travel bags.
Air vent on travel bags
FOIL DAY BAG
• 4mm Polysack inside and out
• Ideal for day trips
• name tag slot
• Carry handle
• Detachable padded shoulder strap
• Rust-proof hardware
• Fin slot
Day (4 mm)
FOIL TRAVEL BAG
• Travel bag 8mm
• Durable 8mm padded bag Polysack inside and out and 600D reinforcement at tail
• Ideal for travel with name tag slot
• Carry handle
• Detachable padded shoulder strap
• Rust-proof hardware
• Fin slot
Travel (8 mm)
FOIL KIT BOARD BAG
The 6’2 Single and Double Foil Kit bags have been designed to keep all your foil gear protected and in one easy to carry bag. There’s enough space for two boards up to 6’2” and two complete foil kits, preparing you for every condition awaiting at your favorite foil spot.
• Single Bag 202 x 70 x 18 cm
• Double Bag 202 x 70 x 32 cm
• 10mm foam padded heat and water resistant polysack
• Padded carry handle
• Detachable padded shouldestraps
• Lockable heavy duty zipper
• 1680D Nose and Tail reinforcement
• 2 interior compression straps to keep your boards tight .
• 3 exterior compression straps.
• Scuff resistant drag protective rails
The inner side of the bag lid contains two big front wing pockets, designed to fit the downwind weapons FW 1650 and FW 1450 or the allrounders FW 1700 and 1325.
Rear wing pockets are designed to accommodate wings such as the high aspect RW 245 as well as the allround RW 330. Fuselage and mounting hardware can be stored in the top as well, while the board section has additional pockets for the mounting plate and two masts up to 100cm. The boards are protected from the foil gear with a 20mm foam padded divider.
KIT BOARD BAG - DOUBLE
BOARD SOCKS
NSP board socks are designed as a lightweight cover for your surfboards to help prevent minor dings and/or stop wax rubbing onto unwanted areas (car seats).
The rounded nose area fits most mid-length and longboards, while the 6’6”and 7’ board socks have a pointy nose shape.
Made from a stretch terry towel material that retains its elasticity, The nose on the socks has an additional 600D material to prevent impact damage.
Size Code
NSP Boardsock 6’6”
NSP Boardsock 7’0”
NSP Boardsock 7’6”
NSP Boardsock 8’0”
NSP Boardsock 8’6”
NSP Boardsock 9’0”
NSP Boardsock 9’6”
NSP Boardsock 10’0”
•NABC0901
•NABC0902
•NABC0903
•NABC0904
•NABC0905
•NABC0906
•NABC0907
•NABC0908
TIE DOWN STRAPS
NSP’s heavy-duty Tie Down Straps are ideal for securing your surf, foil and SUP boards to the roof of your car. Made with strong, yet soft nylon straps that will easily secure your boards without scratching the board. The heavy-duty cam buckles are encased in a padded EVA to to prevent damage to your board or car.
Available in one size only: 15’7” (475 cm)
ROOF RACK PADS
NSP subtly branded roof rack pads easily attach to your existing roof racks for a padded landing for your surf, sup or foil boards. The Roof Rack Pads are designed with a foam core wrapped in a durable 600D water-resistant fabric and fit most standard sized round or square roof racks.
Available in one size only: 17” pads
SOFT ROOF RACKS - SINGLE
NSP’s Soft Roof Racks are perfect for carrying your surf, SUP, or foil boards to the beach on the roof of your car.
The Soft Racks are secured with heavy duty nylon straps that are designed to wrap around the inside of your car while safely securing your boards to the roof. The durable cam buckles keep your boards in place without sliding during transport. The Soft Racks are designed to work on most vehicles.
Available in a Double or Single rack sizing.
Features:
• Single racks hold up 3 shortboards or 2 longboards.
• Double racks hold up to 6 surfboards
• Universal fit for most cars, trucks, and SUVs
• Thick, long length nylon straps
• Heavy-duty, corrosion-free buckles encased in padded EVA to avoid scratching the vehicle.
• Water-resistant, durable, nylon-wrapped, soft rubber pads.
• Compact size and easy to store.
SOFT ROOF RACKS - DOUBLE
SURF / SUP LEASH
• 7mm TPU
• Double Stainless steel swivels
• Double layer neoprene ankle strap
• Integrated key pocket
• Rail saver
• Calf fit for 10’ 9mm
Durable cord 7mm & 9mm
Double stainless steel swivels
Double layer neoprene strap
Triple wrap rail saver
WAIST BELT
• High-quality nylon webbing belt.
• Comfortable neoprene front liner.
• Swivel mount to avoid tangling.
• Quick-release clip.
• One size fits all.
• Compatible with all NSP leashes.
MFC FOOTSTRAPS
NSP partnered with MFC Hawaii for their proven footstrap technology. Easily attach to any foil board for more power and lift. Sold 1 per package.
Features:
• 7mm neoprene padding
• Internal adjustment system
• Double velcro adjustment for a secure fit
• Stepless adjustment for the perfect fit
• Single insert design for NSP compatibility
• Tremendously comfortable
• Bootsie- and wetsuit compatible
• Friction-resistant washers prevent rotation
•NALR1009
•NAFS0901
Leash sold separately SUP Coil available in 9’ (9 mm) Blue
TRACTION PADS
Whether you are foiling, surfing or paddling – the NSP traction pads provide long-lasting grip and confidence. Especially in foiling, a delicate balance is required to get you flying over the surface of the water and your feet need precise positioning to control pitch, roll and yaw.
Always centered
NSP tail pads feature a kicktail and a mild dome in the center of the pad. The ridges of the dome will make sure your back foot finds the dead center of your board without ever looking down.
Thermoformed texture ensures your back foot stays planted over the mast at all times. For hard pumping or committing to a tight radius, get that extra leverage by moving your back foot against the kicktail and force the last bit of performance from your board.
More durable
There is nothing worse than a peeling deck pad, which is why NSP uses premium 3M adhesives, as it provides the best possible bond between your board and the thermoformed EVA. Different from conventional EVA, thermoforming gives these pads a more abrasion-resistant layer that will hold up longer. Make sure your board is properly cleaned up before applying the pads, and wait 24 hours before hitting the water to get the best possible bond for years to come. Removal is easiest with a hot air gun and some soapy water.
Versatile patterns
A 3-piece tail pad is the most versatile pattern that still offers variable width and an arched center strip. It’s the easiest to install, offers tons of grip and will work on any board. In combination with the 4-piece pattern for the front part of the deck, you should have the standing area of your board covered.
Directional diamond-shaped pattern
The deeper the grooves, the more resistance against slipping and superior traction.
Kick & Arch
Performance riders benefit from a 45 degrees kick whenever your foot needs to be well-placed to blow out a wave. Apart from the comfort aspect, an arch helps your backfoot instinctively find the centre line of your board without ever having to look down.
Tail pad (Only)
Traction Pad Set black
Traction Pad Front Blue
Tail pad Blue
Solid tail kick
Directional diamond-shaped pattern
•NACC0710
TRACTION PADS
Made from repurposed EVA. This pad is entirely made from thermoformed EVA off-cuts. As a surfboard manufacturer, we are committed to sustainability and recycling EVA leftovers is our way to minimize the ecological impact of our production processes, thus reducing waste in our landfills. Extremely durable, full of traction, these thermoformed pads will outlast conventional EVA.
• Available in 3 designs.
• Pad colors will vary depending on the off-cuts from our supplier.
FRONT WINGS - PRO (GULLWING)
FRONT WINGS - DOWNWIND
NSP’s dedicated downwinder foils
FW 1400* (Gullwing) (1.25kg)
FW 1720* (Gullwing) (1.55kg)
FW 2500* (Gullwing) (1.87kg)
This is our most popular wing for intermediate to advanced foilers. Perfect for high performance surf, SUP, wing foiling, freeride windsurf and kiteboarding. It delivers next generation efficiency, speed, early lift-off and control. Windsurf riders say this wing delivers great natural stability that enables confident riding at all angles upwind and downwind. For wing, surf and sup. The speed and carving capabilities are unmatched.
Key design characteristics:
- Thinner profile for greater speeds
- Subtle dihedral helps stability
- Works in a wide range of conditions
FW 1250* (Glider style) (1kg)
FW 1450* (Glider style) (1.08kg)
FW 1650* (Glider style) (1.69kg)
These high aspect glider style wings are specifically designed for downwind foiling. The outline and foil profiles combine hydrodynamic efficiency, deliver higher speeds and excellent pump characteristics in downwind conditions. These foils are based on high-performance windsurf/kite race designs and have been adapted for the slower speeds of downwind SUP. Pair with our RW 245 downwind rear wing.
Key design characteristics:
- Early take-off and sustained flight
- Reduced profile for high-efficiency
- Excellent pumping characteristics for downwind racing.
FRONT WINGS – ALLROUND
NSP’s benchmark foils - a perfect combination between lift, speed and stability
FW 1325* (Allround) (1.20kg)
With a surface of 1325cm and a width of 78cm this is the cornerstone of the NSP Airwave setup. The foil profile offers a wide range with a smooth ride and great speed.
Recommended as the perfect setup for surf, wake, light and middle weight SUP foilers.
*Included in the Airwave FW 1325 package and sold individually. Total weight assembled 5.05kg
FW 1700* (Allround) (1.55kg)
The 1700 has set the performance benchmark for early lift and stable performance. On smaller days, the FW 1700 excels at Surf and SUP foiling and is an amazing option for wake foiling, freeride kite (kitewing) and windsurfing.
The similar profile to the FW 1325 offers a wide range, smooth ride and it’s easy to pump. Considering the size, the speed potential of this wing is amazing. A perfect choice for smaller surf or heavier foilers wanting more lift.
*Included in the Airwave FW 1700 package and sold individually Total weight assembled 5.4kg.
FW 2000* (Allround) (1.94kg)
With less curvature for more directional stability and a wider outline, the 2000 wing is the Cadillac of the Airwave range. This wing delivers a smooth ride and just keeps going and going. A great foil for bigger riders, with great bottom end performance for surf, SUP, wake and a perfect choice for wingfoiling.
FRONT WINGS - PRO (SWEPT)
NSP’s more advanced foils
FW 1250* (Swept wing) (1.10kg)
Built for speed - with thinner profiles, a surface of just 1250cm and a width of 70cm this is the fastest foil in the NSP quiver. Its swept shape helps control at high speed, especially while carving hard turns. Loose and highly sensitive to rider input, it is the wing for advanced foilers. String up a series of drawn out turns, at unimaginable speeds with the FW 1250. Designed for advanced wave riding (surf & sup), kitewings, kite surfing and tow foiling.
Key design characteristics:
Foil profile and AOA (angle of attack) delivers a gradual lift/speed slope for great control during acceleration
- Low-aspect ratio for early lift
- Stability through additional width and reduced curvature
- Nice sweep for a deeper speed envelope
- Profile and foil outline deliver great pumping performance
Key design characteristics:
Foil profile and AOA (angle of attack) delivers a gradual lift/speed slope for great control during acceleration
- Low-aspect ratio for early lift
- Stability through additional width and reduced curvature
- Nice sweep for a deeper speed envelope
- Profile and foil outline deliver great pumping performance
Key design characteristics:
- Diminished curvature, for sustained glide from one bump to the next
- Slight winglets help directional stability
- More slender profile for better control at high speeds
- Foil profile and AOA (angle of attack) offers great lift at lower speeds
Key design characteristics:
- Designed to work with our standar d 330 flat rear wing
- Thinner profile for greater speeds
- Curvature allowing for fast rail-to-rail transitions
- Serious rake for carved surfing
SURFACE 1325cm2 / Width 78cm (30.7”)
SURFACE 1700cm2 / Width 85cm (33.4”)
SURFACE
SURFACE
REAR WINGS
RW 330 FLAT WING (0.20kg) RW 340 M WING (0.20kg)
The allrounder - flat with mild winglets, a fast and loose rear wing that works well with all NSP Front wings. This is our go to back wing. With plenty of positive rider feedback, it makes pumping a breeze. *Comes standard with the Airwave FW 1325 foil package and the Airwave FW 1700 foil package.
This is our most stable rear wing, designed for directional stability, this wing compliments our FW 1250 and FW 1400 wings. Handling fast direction changes with ease and totally at home at higher speeds, this is the best option for freeride windsurfing, wingfoiling, kitefoiling, advanced surf and sup foilers.
High-aspect shape for efficiency, sustained flights and performance downwind. For windsurfing, use this rear wing in combination with the Fuselage 85.
*supplied with specific 2 degree shim for 70 cm Fuselage
RW 240 SURF (0.23kg)
This pre-preg carbon rear-wing is held in place with two screws. With a reduced surface, your setup all come alive, enabling you to maneuver faster than before. Increased responsiveness through roll and pitch as you carve and pump your way through the swell.
*supplied with specific 2 degree shim for 70 cm Fuselage
RW 228 WINDSURF & SURF (0.23kg)
This pre-preg carbon rear-wing is held in place with two screws. Intended for windsurfing and kitesurfing specifically, the RW 228 is designed for sustained flight and an emphasis on directional stability. This is achieved by using articulated winglets and a more neutral profile.
*supplied with specific 2 degree shim for 85 cm Windsurf Fuselage
The NSP Airwave Modular 70 set contains a mounting plate, Fuselage 70, Mast 70 and all the necessary screws, shims and tools to attach every available NSP Front and Rear Wings.
The 600D padded bag with carry handle is designed to fit every mast from 60cm to 100 cm and the bag length can be adjusted with the attached webbing strap
FUSELAGE
Airwave fuselages are designed without compromise. Our design brief was clear “must be hydro-dynamically efficient, has to be strong, stiff, cannot bend, with solid mast and wing connections and it must hold up to wipe-outs in the shore break”. Each precision fuselage is individually CNC cut from aircraft grade 6061-T6 aluminum and is anodized for protection and a great look.
Available in two sizes:
Fuselage 70cm
Fuselage 85cm*
•NFOIL09
•NFOIL26
* supplied with 2 degree shim
The regressed mounting point for the mast creates additional rigidity, strength and durability.
TUNING SHIMS
AIRWAVE PRECISION TUNING
Most hydrofoils in the market are set to a single AOA (angle of attack) at the back wing, usually varying between one- and three degrees. The Airwave is different, as it comes with three precision tuning shims, allowing the rider to adjust the AOA of the back wing to customize the balance between lift,
For example, the 3° shim (black) allows for pumping with maximum efficiency, but is slower and at higher speeds, it generates too much lift, requiring continuous counteracting by applying front foot pressure. Switching to the 1° shim (silver) gives less lift, is harder to pump but offers maximum speed. The 2° shim (orange) is the most neutral of the three, it’s the base line we design all our foils to and is the best place to start as in regular surfing, each shim has its own feel and performance characteristics. Since a hydrofoil moves on three axis, instead of the two we recommend you experiment as your skills develop.
The 85 Fuselage is for windsurfers and kitesurfing and is supplied with a single 2° shim only. The fuselage can be used with the standard shims supplied with the Airwave set, but they are a little narrow, as the Fuselage 85 tip (tail) is wider.
MASTS
With a width of 135mm (5.31”), these masts are 22.5% wider than most others on the market. The wider cord allows for a more efficient foil profile, more directional stability and a higher rigidity 6061-T6 aircraft grade aluminum. All Airwave masts feature 3 full-length channels for increased stiffness. Airwave masts are anodized for protection and a great look, and sealed with silicone plugs to keep them watertight.
All Airwaves can be interchanged with the following add-on sizes:
Mast 60cm Entry level and shallows (1.45kg)
Mast 70cm Comes standard with any NSP Airwave package (1.7kg)
Mast 80cm More advanced surfers/will windsurf too (1.9kg)
Mast 90cm Windsurf, kitesurf and wing (2.1kg)
Mast 100cm Kitesurf and windsurfer (2.3kg)
Tuttle Converter :
For riders who would like to use the NSP Airwave for windsurfing or on SUP and surfboards with a tuttle box, simply swap the base plate for this tuttle converter and enjoy additional board options.
AIRWAVE FOIL ACCESSORIES
•NFOIL03
•NFOIL06
•NFOIL04
•NFOIL17
•NFOIL18
Mounting Plate : (0.750kg)
Designed to distribute loads evenly, the CNC cut, anodized aluminum Airwave base features slots for easy mounting and adjustment. The mast sits in a 4cm deep sleeve creating a rigid connection and handling considerable loads.
The regressed mounting point for the mast creates additional rigidity, strength and durability.
M8 x 30 bolts - 4 pcs
Four high-grade stainless steel bolts with M8 countersunk Torx® screws will take the required torque to secure your foil to the board without stripping. Corrosion resistant nuts, sourced for marine applications, allow tuning of your setup as you slide them up or down the twin rack mount.
Screws M8 x 30 - 3 pcs
Mount your Front wing to the fuselage with three high-grade stainless steel bolts,
Mast Screws M6 x 45
M6 long countersunk Torx® screws mount your Airwave mast to the fuselage and mounting plate.
RW Screw Kit - M6 x 18 - 2 pcs
Allen
UPWIND
Benefit from controllable lift. Excess energy is released from the trailing edge of the upper wing.
REACHING OR DOWNWIND
Retain solid shape and generate progressive power for thrilling speed runs.
WHEN OVERPOWERED
Notice the Airwing rising to a horizontal angle above your head, feeling neutral and controllable.
NEUTRAL FLIGHT
Sufficiently powered up, an Airwing can be held by the leading edge in one hand as it floats behind you. Concentrate on your surfing or hydrofoiling until you need Airwing power again.
AIRWAVE COMPATIBLE
Designed for the NSP foiling products, the Airwing is optimized for use with the NSP Airwave and NSP SUP Foil. Note that any Airwing will also perform out-ofthe-bag with other known brands, shapes and foils.
STIFF, SAFE AND STABLE
Designed to maintain its shape in all circumstances, the Airwing is stiff and features a clamped valve making sure you can recover your equipment in case of a leak. *Wing
*Use this table as an indication as it is subject to skill level, rider weight, foil setup and conditions
AIRWING ACCESSORY
Photographer : @paullavoine
Rider : Alex Bicrel
Location : France
Board : Airwave - Airwing - Sup Wing Foil Pro
Airwing Hand Pump*
Double action pump with gauge, 5 hose nozzles to fit most valves and foot rest pedal.
*NSP Double Action pump sold separately
Airwing Bladders
6.0 Strut Bladder
Strut Bladder
Strut Bladder
Strut Bladder
Airwing is supplied with:
• Airwing backpack
• 6mm TPU coiled wing leash with double stainless steel swivels
• Repair patch
• Anodized aluminum pump valve adapter
* NSP Double Action pump sold separately
Airwing Backpack
For easy transportation, storage and the carrying of a pump and additional accessories.
Padded adjustable straps
Inside pocket
Drain hole/air
2. Airwing Pump Valve Adapter
BUOYS
Designed utilizing our durable PVC inflatable board material, our racing buoys are equipped with 4 heavy-duty D-rings for easy and secure anchoring in any lake or open ocean. Great for race, demo events and promotions. Pyramide inflatable racing buoy
cm (Orange)
cm (Orange)
TENT - BANNER - BEACH FLAG
Photographer : David Edmondson
Location : Srilanka
•NACC0607
• Durable and UV resistant Nylon seat turns your SUP into a Kayak with ease.
• Fiber tube reinforced seat back and the adjustable webbing straps ensure a perfect upright seating comfort.
FISHERMAN SEAT
• Saltwater resistant clips and buckles.
• Comes together with 1 piece padded shoulder strap, which also can be used as leg strap in combination with the supplied shoulder/leg strap on our NSP The Quest board
FISHERMAN CARGO STRAP SET
•NACC0607
•NACC0608
Fisherman Seat with Shoulder Strap
NSP OUR STORY
NSP was born in 2001 from the vision of Bruce “Buzz” Hansen,
a life-long surfer, skater and all round waterman.
While working on Maui as a custom surfboard builder, Buzz had an epiphany about producing affordable, versatile, durable and great performing surfboards. Buzz correctly realized there were everyday surfers who needed an affordable board that performed in Hawaii, yet they didn’t require “custom” or specialized competition or extreme surf boards.
The quest began, so Buzz summoned his friends working for a leading composites manufacturer with the goal to create a light, very durable surf board at highly competitive prices. Working together they introduced a new epoxy technology that would go on to revolutionize the industry and quite possibly recreational surfing. Weekend and occasional surfers no longer had to rely on the ill- performing “foamies” or be relegated to the used board market.
Our code name during development was “New Surf Project”. The name stuck and “NSP” was established. Over the years, we changed and evolved, and so did the name. Today, NSP stands for “Nature”, “Surfing” and “Products” because at the end of the day, that is what the company is all about.
Creating amazing products, firmly maintaining our surfing roots while we expand in other exciting water sports with the best possible designers, engineers and materials involved. And last but definitely not least; “Nature”. Choosing repurposed, recycled or renewable resources wherever we can is essential to us as a brand, creating a more sustainable future for ourselves and our sport.
His dream was a utilitarian surfboard that could ride in the back of a pick-up truck to the beach, be left in the sun all-day or loaned to a friend without fear of damage – of course it had to surf well enough to be given to his long-time surfing buddies, neighbors and friends.
Bruce ‘Buzz’ Hansen on one of the first NSP epoxy surfboards
Today, NSP is one of the world’s largest brands in recreational surfing and stand-up paddle boards. Everyday new enthusiasts, young and old, go out and introduce their friends and family to the freedom of the sport and the brand.
NSP
Since 2013 NSP has produced some of the fastest SUP race boards on the planet, quickly racking up some of the most sought after and prestigious titles with the help of national and international athletes.
In almost 20 years, with hundreds of thousands of boards produced, our core values remain the same. NSP stays true to the vision of creating great performing, affordable, durable surf and paddle boards that allow everyone to catch more waves.
Photographer : Laurent Nevarez Rider : Titouan Puyo
France
A FEW NSP MILESTONES
• Sold our first boards in Australia and Hawaii
• Shipped our first SUP boards
• Launched our first NSP race boards used in ISA Worlds
• Dale Chapman & Alain Teurquetil started on the race program
• Travis Grant joined the team
• Launched patent pending, award-winning Coco technology
• Alain Teurquetil started exclusively designing our race program
• Travis Grant won Molokai on a production NSP board
• Launched our first foil boards
• Cocoflax wins Paddle Expo product of the year
• Collaborated with Carl Schaper on a performance surf range
• Collaborated with Tully St. John on new longboard Sleep Walker and created new Teaching soft board with Dane Gillett.
• NSP’s first Pro model surf boards are put into production designed by Carl Schaper.
Photographer : Fenna De King Rider : Will De King, Izzi Caldow, Noah Davies, Paul Jonesy, Tully St. John
Location : Australia
Board : PU Sleep Walker, Elements Sleep walker, Cocoflax Dream Rider, CSE Pro-9, CSE Chopstix, Sundowner, CSE Butter Knife
NSP MISSION
To create a utilitarian surf, race, foil or paddle board that can ride in the back of a pick-up truck, be left in the sun all-day or loaned to a friend – without fear of damage – and of course, that performs well.
NSP VISION
Seeing people of all ages and skill levels enjoying the lifestyle of surf and paddle boarding by providing boards that paddle faster, catch more waves, last longer and are a whole lot of fun to ride.
Photographer : @Paillavoine
Rider : Alex Bicrel Location : France Board : Airwave , Surf Foil
SOCIAL MEDIA
SURF SUP FOIL
#justaddwater
#nspsurfnsup
#nsp
#nspsurf
#surfing
#paddling
#balance
#outdoors
#epoxy
#ecoboard
#catchmorewaves
#sustainablesurf
#harmlessvest
#justaddwater
#nspsurfnsup #nsp
#nspsup
#nspsurf
#livetheadventure
#surfing
#paddling
#supsurf #balance
#outdoors
#livetoride
#paddleboarding
#harmlessharvest
#sustainablesurf
#justaddwater
#NSPfoil
#loyaltothefoil
#nspairwave
#nspfoiling
#frequentflyer
RACE
#justaddwater
#nspsurfnsup
#nsp
#nspsup
#nspracing
#livetheadventure
#paddling
#supsurf
#balance
#outdoors
#recessdeck
#dugout
#sonic
#ninja
#puma
#carolina
#ecoboard
#sustainablesurf
#harmless harvest
GET CREATIVE
And remember, the key to success in social media is being “on it”. Posting for the sake of posting will show, and your posts will go unnoticed.
Engage your shops, team riders, ambassadors, share demo days, winter sales, summer sales, product reviews or anything else you think is interesting. Your audience will let you know what they like.
TAGGING #HASHTAGS USE DIFFERENT HASHTAGS
Tagging is what lets people know you are talking to them, and will trigger engagement. Tagging a single person activates their network, carrying you and your message that much further.
#sopitted is going to attract different instagram users than #tractionpad or #kookoftheday. Being creative and adding the hashtags that apply to a specific situation will allow you to get more followers so make sure to change things up!
Rider : Kaelan Lockhart
Location : 12 Towers Race Event, Australia
Board : Paddle Speedster