(Resin Transfer Moulding) : Lightweight performance core side fins offering
and responsiveness; can be used in a variety of allround surf conditions. Available in 3 sizes J3 (112.5mm), J5 (115mm) and J7 (120
(L & R) - NAFI0804 (C) - NAFI0803
NAFI0904
Draft length: 202mm
Designed by Titouan Puyo, Travis Grant, Marcus Hansen, Alain Teurquetil and Trent Pedersen, the Surf Race fin is the final result of several iterations being developed parallel to the NSP racing program.
For beach racing, buoy racing and the ability to pull off consistent kick turns in the middle of a race, the NSP Surf Race 20 is the more appropriate fin. Or in Travis’s words; it’s the fin better suited for turning and surfing.
The Surf Race 20 fin comes standard with all NSP Puma boards.
Length: 200 mm
Draft length: 220mm
Draft length: 240mm
Designed and carefully crafted to deliver the desired fin properties required in SUP racing: tracking, stability, efficiency, speed and acceleration. Suitable for pros and intermediates alike, these performance fins have been optimized to maximize efficiency:
Design Features:
• Foil design is optimized specifically for the speeds of SUP R ace board
• Forgiving foil design that minimizes drag even at high angles of attack
• Plan form minimizes tip vortices while stabilizing the board at speed
• Flex properties produce smooth and stable board reactions, even in chop, bumps and rough conditions
• Generates forward lift when swell energy passes over the unique foil design, giving the rider a forward speed boost that is noticeable, resulting in faster runs
• Light weight and strong
• Available in three sizes to best suit your board size, strength, weight and conditions
• Most men start with 24cm, Women start with 22cm and pros use the 20cm
Detachable padded shoulder strap (4mm & 8mm)
Rust-proof hardware (4mm & 8mm)
• Heat and water resistant polysack
Warning label
Heat and water resistant polysack material inside and out (4mm, 8mm)
• Padded carry handle
• Detachable padded shouldestraps
• Fin slots included on all SUP bags and for surf longboard bags
• Lockable heavy duty zipper
• Reinforced with 600 D fabric on the nose of 8 mm. bags
Fin slot (4mm & 8mm) only on longboard
Name tag slot and size label (4mm & 8mm)
Surf Day 6’0”
Surf Day 7’0’’
Surf Day 7’4’’
Surf Day 7’10’’
Surf Day 8’6’’
Surf Day 9’6’’
Surf Day 10’0’’
Surf Day 11’0’’
Dimensions
193 x 62cm
218 x 64cm
229 x 68cm
249 x 68cm
270 x 68cm
299 x 70cm
317 x 74cm
349 x 78cm
Code
Bag Name Bag Name
•NABB0806 •NABB0807 •NABB0808 •NABB0809
•NABB0810
•NABB0811 •NABB0859
•NABB0812
Surf Travel 6’0”
Surf Travel 7’0’’
Surf Travel 7’4’’
Surf Travel 7’10’’
Surf Travel 8’6’’
Surf Travel 9’6’’
Surf Travel 10’0’’
Surf Travel 11’0’’
Dimensions
193 x 63cm
219 x 67cm
230 x 69cm
250 x 69cm
271 x 69cm
300 x 71cm
318 x 75cm
350 x 79cm
Going on a surf holiday, competing in the next WSL event or are you a sales rep that needs to carry a lot of board?
Now you can easily carry up to three boards in one Triple bag. The triple board bag is constructed with heavy duty fabric and rust-free zippers. Don’t be afraid to drag the bag behind you while running through the airport, the Triple board bag comes equipped with highly durable drag protective rails.
• Made to hold up to 3 boards.
• Coffin Sidewall.
• 10 mm dual density foam padding.
• Heavy Duty polyester outer layer with 1680D Nose and Tail reinforcement.
• Internal dividers to keep boards safe.
• 2 interior compression straps to keep your boards tight .
• 2 exterior compression straps.
• Adjustable shoulder strap.
• Heavy duty, rust-resistant zippers.
Code
•NABB0829 •NABB0830 •NABB0831 •NABB0832 •NABB0833 •NABB0834 •NABB0862 •NABB0835
Designed for Fish, Hybrid 5’6” / 6’0” Funboard, Fish, Hybrid 6’2”/6’4”/6’6”/ 6’8”/7’0” Funboard, Fish, 7’2”/7’4” Funboard, 7’6”/7’10” Longboard 8’0”/8’2”/8’4”/8’6” Longboard 9’0”/9’2”/9’6” Longboard 9’8”/10’0” Longboard 10’0”/10’2”/11’0”
Size Code
6’0: 195 x 56 x 24 cm
•NABB0855
6’8: 214 x 57 x 24 cm •NABB0856
7’6: 239 x 59 x 24 cm •NABB0857
9’6: 290 x 60 x 24 cm •NABB0858
• Heat and water resistant polysack
• Padded carry handle Plus center handle on travel bag for easy carrying of wider boards (except SUP Surf bags)
• Detachable padded shoulder straps
• Fin slots included on all SUP bags and for surf longboard bags
• Lockable heavy duty zipper
• Name slots on all boards
• Air vent on travel bags
Bag Name
Race 4mm Day bag 12’6’’
Race 8mm Travel bag 12’6’’
Size (cm.) Designed for Race Boards Code
Puma 12’6’’ (All size)
•NABB0847 399 x
Puma 12’6’’ (All size)
• 4 mm padding with extra 2 mm protection zones on nose and tail
• Side walls reinforce with 600D
• Mesh air vent
• Lockable heavy duty rust-free zipper
• Carry handles on tail, side and top
• Velcro fin slot
•NABB0824
• Center line compression strap compliments the existing rail strap to keep your board snug while traveling.
Dimension (cm.) Designed for Race Boards
Ninja 14’0” (All
Puma 14’0” (All size)
Sonic 14’0” (All size) Carolina 14’0” (All size) Molokai (All size)
•NABB0825
•NABB0826 Code
• 4mm Polysack inside and out
• Ideal for day trips
• name tag slot
• Carry handle
• Detachable padded shoulder strap
• Rust-proof hardware
• Fin slot
• Travel bag 8mm
• Durable 8mm padded bag Polysack inside and out and 600D reinforcement at tail
• Ideal for travel with name tag slot
• Carry handle
• Detachable padded shoulder strap
• Rust-proof hardware
• Fin slot SURF Foil Day Bag 4’8”
Foil Day Bag 5’6”
Foil Day Bag 5’10”
Foil Day Bag 6’10”
Foil Day Bag 7’6”
SURF Foil Travel Bag 4’8’’ SURF Foil Travel Bag 5’6’’
SUP Foil Travel Bag 5’10’’ SUP Foil Travel Bag 6’10’’
Foil Travel Bag 7’6’’
NSP board socks are designed as a lightweight covers for your surfboards to helps prevent against minor dings and stop wax rubbing onto unwanted areas (car seats). Rounded nose area to fit most mid-length and longboards (pointed nose on 6’6”- 7’ board socks
Made from a stretch terry towel material which retains its elasticity so the sock won’t become loose. The nose of the sock has an additional 600 D material to further prevent dings.
Code Size
NSP Boardsock 6’6”
NSP Boardsock 7’0”
NSP Boardsock 7’6”
NSP Boardsock 8’0”
NSP Boardsock 8’6”
NSP Boardsock 9’0”
NSP Boardsock 9’6”
NSP Boardsock 10’0”
•NABC0901
•NABC0902
•NABC0903
•NABC0904
•NABC0905
•NABC0906
•NABC0907
•NABC0908
• High-quality BASF™ TPU
• Coiled 7mm cord
• Double stainless steel swivels
• Double layer neoprene calf strap
• Integrated key pocket
• Rail saver
• High-quality nylon webbing belt
• Comfortable neoprene front liner
• Swivel mount to avoid tangling
• Quick release clip
• One size fits all
• Compatible with all NSP leashes
Code : •NALR0605
• 7mm TPU
• Double Stainless steel swivels
• Double layer neoprene ankle strap
• Integrated key pocket
• Rail saver
• Calf fit for 10’ 9mm
cord 7mm & 9mm
Protect your SUP rails with 3M protection tape. Available in 2x 7.5 cm x 2 meter rolls.
Code : •ACC019
The ultimate combination of strength, stretch and elasticity. Durable Thermoplastic Polyurethane (TPU) leashes with two swivels, leash string, key pocket and double layered velcro strap. Leash sold separately
Coil available in 6’ (7 mm) and 10’ (7 mm)
•NFOIL05
With a surface of 1325cm and a width of 78cm this is the cornerstone of the NSP Airwave setup. The foil profile offers a wide range with a smooth ride and great speed. Recommended as the perfect setup for surf, wake, light and middle weight SUP foilers.
*Included in the Airwave FW 1325 package and sold individually. Total weight assembled 5.05kg
Key design characteristics:
Foil profile and AOA (angle of attack) delivers a gradual lift/speed slope for great control during acceleration
- Low-aspect ratio for early lift
- Stability through additional width and reduced curvature
- Nice sweep for a deeper speed envelope
- Profile and foil outline deliver great pumping performance FW 1325* (Allround) (1.20kg)
FW 1700* (Allround) (1.55kg)
•NFOIL02
The 1700 has set the performance benchmark for early lift and stable performance. On smaller days, the FW 1700 excels at Surf and SUP foiling and is an amazing option for wake foiling, freeride kite (kitewing) and windsurfing. The similar profile to the FW 1325 offers a wide range, smooth ride and it’s easy to pump. Considering the size, the speed potential of this wing is amazing. A perfect choice for smaller surf or heavier foilers wanting more lift.
*Included in the Airwave FW 1700 package and sold individually Total weight assembled 5.4kg.
FW 2000* (Allround) (1.94kg)
•NFOIL25
With less curvature for more directional stability and a wider outline, the 2000 wing is the Cadillac of the Airwave range. This wing delivers a smooth ride and just keeps going and going. A great foil for bigger riders, with great bottom end performance for surf, SUP, wake and a perfect choice for wingfoiling.
Key design characteristics:
Foil profile and AOA (angle of attack) delivers a gradual lift/speed slope for great control during acceleration
- Low-aspect ratio for early lift
- Stability through additional width and reduced curvature
- Nice sweep for a deeper speed envelope
- Profile and foil outline deliver great pumping performance
Key design characteristics:
- Diminished curvature, for sustained glide from one bump to the next
- Slight winglets help directional stability
- More slender profile for better control at high speeds
- Foil profile and AOA (angle of attack) offers great lift at lower speeds
FW 1250* (Swept wing) (1.10kg)
•NFOIL20
Built for speed - with thinner profiles, a surface of just 1250cm and a width of 70cm this is the fastest foil in the NSP quiver. Its swept shape helps control at high speed, especially while carving hard turns. Loose and highly sensitive to rider input, it is the wing for advanced foilers. String up a series of drawn out turns, at unimaginable speeds with the FW 1250. Designed for advanced wave riding (surf & sup), kitewings, kite surfing and tow foiling.
FW 1400* (Gullwing) (1.25kg)
FW 1720* (Gullwing) (1.55kg)
Key design characteristics:
- Designed to work with our standard 330 flat rear wing
- Thinner profile for greater speeds
- Curvature allowing for fast rail-to-rail transitions
- Serious rake for carved surfing
•NFOIL21
•NFOIL29
•NFOIL28
This is our most popular wing for intermediate to advanced foilers. Perfect for high performance surf, SUP, wing foiling, freeride windsurf and kiteboarding. It delivers next generation efficiency, speed, early liftoff and control. Windsurf riders say this wing delivers great natural stability that enables confident riding at all angles upwind and downwind. For wing, surf and sup. The speed and carving capabilities are unmatched.
FW 1250* (Glider style ) (1kg)
FW 1450* (Glider style) (1.08kg) FW
•NFOIL30
•NFOIL31
•NFOIL24 FW 2500* (Gullwing) (1.87kg)
These high aspect glider style wings are specifically designed for downwind foiling. The outline and foil profiles combine hydrodynamic efficiency, deliver higher speeds and excellent pump characteristics in downwind conditions. These foils are based on high-performance windsurf/ kite race designs and have been adapted for the slower speeds of downwind SUP. Pair with our RW 245 downwind rear wing.
Key design characteristics:
- Thinner profile for greater speeds
- Subtle dihedral helps stability
- Works in a wide range of conditions
Key design characteristics:
- Early take-off and sustained flight
- Reduced profile for high-efficiency
- Excellent pumping characteristics for downwind racing
With a width of 135mm (5.31”), these masts are 22.5% wider than most others on the market. The wider cord allows for a more efficient foil profile, more directional stability and a higher rigidity 6061-T6 aircraft grade aluminum. All Airwave masts feature 3 full-length channels for increased stiffness. Airwave masts are anodized for protection and a great look, and sealed with silicone plugs to keep them watertight.
All Airwaves can be interchanged with the following add-on sizes:
Mast 60cm
Mast 70cm
Mast 80cm
Mast 90cm
Entry level and shallows (1.45kg)
Comes standard with any NSP Airwave package (1.7kg)
More advanced surfers/will windsurf too (1.9kg)
Windsurf, kitesurf and wing (2.1kg)
Mast 100cm
Kitesurf and windsurfer (2.3kg)
regressed mounting point for the mast creates additional rigidity, strength and durability.
The allrounder - flat with mild winglets, a fast and loose rear wing that works well with all NSP Front wings. This is our go to back wing. With plenty of positive rider feedback, it makes pumping a breeze.
*Comes standard with the Airwave FW 1325 foil package and the Airwave FW 1700 foil package.
This is our most stable rear wing, designed for directional stability, this wing compliments our FW 1250 and FW 1400 wings. Handling fast direction changes with ease and totally at home at higher speeds, this is the best option for freeride windsurfing, wingfoiling, kitefoiling, advanced surf and sup foilers.
High-aspect shape for efficiency, sustained flights and performance downwind. For windsurfing, use this rear wing in combination with the Fuselage 85.
*supplied with specific 2 degree shim for 70 Fuselage
This pre-preg carbon rear-wing is held in place with two screws. With a reduced surface, your setup all come alive, enabling you to maneuver faster than before. Increased responsiveness through roll and pitch as you carve and pump your way through the swell.
* supplied with specific 2 degree shims
This pre-preg carbon rear-wing is held in place with two screws. Intended for windsurfing and kitesurfing specifically, the RW 228 is designed for sustained flight and an emphasis on directional stability. This is achieved by using articulated winglets and a more neutral profile.
*supplied with specific 2 degree shim for 85 cm Windsurf Fuselage
Mounting Plate : (0.750kg)
Designed to distribute loads evenly, the CNC cut, anodized aluminum Airwave base features slots for easy mounting and adjustment. The mast sits in a 4cm deep sleeve creating a rigid connection and handling considerable loads.
Tuttle Converter :
For riders who would like to use the NSP Airwave for windsurfing or on SUP and surfboards with a tuttle box, simply swap the base plate for this tuttle converter and enjoy additional board options.
Most hydrofoils in the market are set to a single AOA (angle of attack) at the back wing, usually varying between one- and three degrees. The Airwave is different, as it comes with three precision tuning shims, allowing the rider to adjust the AOA of the back wing to customize the balance between lift, speed, stability and turning.
For example, the 3° shim (black) allows for pumping with maximum efficiency, but is slower and at higher speeds, it generates too much lift, requiring continuous counteracting by applying front foot pressure. Switching to the 1° shim (silver) gives less lift, is harder to pump but offers maximum speed. The 2° shim (orange) is the most neutral of the three, it’s the base line we design all our foils to and is the best place to start as in regular surfing, each shim has its own feel and performance characteristics. Since a hydrofoil moves on three axis, instead of the two we recommend you experiment as your skills develop.
Airwave fuselages are designed without compromise. Our design brief was clear “must be hydro-dynamically efficient, has to be strong, stiff, cannot bend, with solid mast and wing connections and it must hold up to wipe-outs in the shore break”. Each precision fuselage is individually CNC cut from aircraft grade 6061-T6 aluminum and is anodized for protection and a great look.
Available in two sizes:
Fuselage 70cm Fuselage 85cm* Standard in all Airwave sets (1kg) For free ride windsurfing (1.2kg)
M8 x 30 bolts - 4 pcs
•NFOIL14
Four high-grade stainless steel bolts with M8 countersunk Torx® screws will take the required torque to secure your foil to the board without stripping. Corrosion resistant nuts, sourced for marine applications, allow tuning of your setup as you slide them up or down the twin rack mount.
Tuttle Converter •NFOIL23
Have a slalom surfboard laying around or a foilboard with a tuttle box? Now you can rig up your Airwave with a tuttle system too.
Mast Screws M6 x 45 •NFOIL13
M6 long countersunk Torx® screws mount your Airwave mast to the fuselage and mounting plate.
Mounting Plate
•NFOIL10
Designed to spread the load, the anodized aluminum base features screw slots instead of holes, allowing for additional fine tuning.
Screws M8 x 30 - 3 pcs
•NFOIL11
Mount your Front wing to the fuselage with three high-grade stainless steel bolts,
RW Screw Kit - M6 x 18 - 2 pcs •NFOIL12
Torx® Allen Key T30/T40 Kit - 2 pcs
•NFOIL27
Fuselage 70 •NFOIL09
Fuselage 85 •NFOIL26
The centerpiece of the foil. These anodized aluminum, hydro-dynamically, CNC cut fuselages measures 70 cm (27.5″) in standard form. Deep slots seamlessly attaches to the masts and hold the front wing, the back wing and the tuning shims. The 85 Fuselage is for windsurfers and kitesurfing and is supplied with specific 2 degree shim for windsurfing
RW Tuning Shims
•NFOIL15
Three rear wing anodized aluminum shims allow you to trim your foil for different water conditions. Available in 1, 2, and 3 degrees.
*fitting 330 / 340 Rear Wings
•NFOIL018
Mast 60, 70, 80, 90, 100
Anodized aluminum mast with reinforced internals for unparalleled rigidity.
Available in 5 sizes – 60 cm (23.6″), 70 cm (27.5″) and
Airwing is supplied with:
• Airwing backpack
• Wing leash
• Repair patch
• Anodized aluminum valve pump adapter
*NSP Double Action pump sold separately
Airwing Codes: Red Size
•NAIR0808
•NAIR0807 •NAIR0809 •NAIR0811 •NAIR0814
Highly durable 6mm TPU coiled wing leash with double stainless steel swivels, and double layer neoprene strap.
For easy transportation, storage and the carrying of a pump and additional accessories.
• Padded adjustable straps
• Inside pocket
• Drain hole/air vent
Double action pump with gauge, 5 hose nozzles to fit most valves and foot rest pedal.
1. Airwing Hand Pump
* NSP Double Action pump sold separately 3 4
Code: •NAIR0813
2.Airwing Valve Adapter
Code: •NAIR0824
3.Airwing Le Bladder 4.Airwing Generic Strut Bladders 1 2
6.0 LE Bladder
5.0 LE Bladder 4.0 LE Bladder 3.0 LE Bladder
6.0 Strut Bladder
5.0 Strut Bladder
4.0 Strut Bladder
3.0 Strut Bladder
NSP’s Soft Roof Racks are perfect for carrying your surf, sup, or foil boards to the beach on the roof of your car.
The Soft Racks are secured with heavy duty nylon straps that are designed to wrap around the inside of your car while safely securing your boards to the roof. The durable cam buckles keep your boards in place without sliding during transport. The Soft Racks are designed to work on most vehicles.
Available in a Double or Single rack sizing.
Features:
• Single racks hold up 3 shortboards or 2 longboards
• Double racks hold up to 6 surfboards
• Universal fit for most cars, trucks, and SUVs
• Thick, long length nylon straps
• Heavy-duty, corrosion-free buckles encased in padded EVA to avoid scratching the vehicle.
• Water-resistant, durable, nylon-wrapped, soft rubber pads.
• Compact size and easy to store.
: •NACR0903
NSP’s heavy-duty Tie Down Straps are ideal for securing your surf, foil and SUP boards to the roof of your car. Made with strong, yet soft nylon straps that will easily secure your boards without scratching the board. The heavy-duty cam buckles are encased in a padded EVA to also avoid damage to your board or car.
Available in one size: 15’7” (475cm)
NSP subtly branded roof rack pads easily attach to your existing roof racks for a padded landing for your surf, sup or foil boards. The Roof Rack Pads are designed with a foam core wrapped in a durable 600D water-resistant fabric and fit most standard sized round or square roof racks.
Available in one size: 17” pads
The MFC designed footstrap is a must have for anyone looking to get into wingding foiling, windsurf foiling or kitesurf foiling. The external adjustable system and 1/2/3 bolts accommodate every foot size and board setup while offering the best comfort and support. You totally feel ‘locked in’ when you slip your feet into the MFC footstrap. Sold one per package.
Features:
• 7mm neoprene padding
• Internal adjustment system
• Single or double insert compatibility
• Maximum comfort
NAPP0801M
NAPP0806M
NAPP0811M
NAPP0816M
NAPP0821F
NAPP0825F
NAPP0829F
NAPP0802M
NAPP0807M
NAPP0812M
NAPP0817M
NAPP0822F
NAPP0826F
NAPP0830F
NAPP0833M
NAPP0836M
NAPP0840M
NAPP0844F
NAPP0848F
NAPP0852F
NAPP0868F
NAPP0872F
NAPP0876F
NAPP0880M
NAPP0885M
NAPP0845F
NAPP0849F
NAPP0853F
NAPP0856M
NAPP0860M
NAPP0864M
NAPP0869F
NAPP0873F
NAPP0877F
NAPP0881M
NAPP0886M
NAPP0803M
NAPP0808M
NAPP0813M
NAPP0818M
NAPP0823F
NAPP0827F
NAPP0831F
NAPP0834M
NAPP0837M
NAPP0841M
NAPP0846F
NAPP0850F
NAPP0854F
NAPP0857M
NAPP0861M
NAPP0865M
NAPP0870F
NAPP0874F
NAPP0878F
NAPP0882M
NAPP0887M
NAPP0804M
NAPP0809M
NAPP0814M
NAPP0819M
NAPP0824F
NAPP0828F
NAPP0832F
NAPP0835M
NAPP0838M
NAPP0842M
NAPP0847F
NAPP0851F
NAPP0855F
NAPP0858M
NAPP0862M
NAPP0866M
NAPP0871F
NAPP0875F
NAPP0879F
NAPP0883M
NAPP0888M
NAPP0805M
NAPP0810M
NAPP0815M
NAPP0820M
NAPP0839M
NAPP0843M
NAPP0859M
NAPP0863M
NAPP0867M
NAPP0884M
• Durable and UV resistant Nylon seat turns your SUP into a Kayak with ease.
• Fiber tube reinforced seat back and the adjustable webbing straps ensure a perfect upright seating comfort.
• Saltwater resistant clips and buckles.
• Comes together with 1 piece padded shoulder strap, which also can be used as leg strap in combination with the supplied shoulder/leg strap on our NSP The Quest board
• Biggest iSUP pump on the market
• Capacity 3.5 + 3.5 L
• Max pressure 26pcs
• 3 stage individual adjustable between max capacity (1), mediu m (2) & max pressure (3)
• Ergonomic handlebar and Canted foot packs
-- Ken Hoeve --
Easy to read pressure gauge, comfortable hand grips and foot placement pads. Lightweight and easy to store inside your inflatable backpack.
