PVC U Product characteristics Very good chemical resistance Flame retardent, self-extinguishing after removal of flame High rigidity Product applications Chemical engineering and tank building Electrical industry Construction industry
General properties Density Flammability (thickness 3mm/ 6mm)
Test method DIN EN ISO 1183-1 UL 94
Unit g/cm³
Value 1,45 V0 / V0
Mechanical properties Yield stress Elongation at break Tensile modulus of elasticity Notched impact strength Shore hardness Thermal properties Thermal conductivity Coefficent of linear thermal expansion Service temperature, long term Service temperature, short term (max.) Electrical properties Dielectric constant Dielectric dissipation factor (106Hz) Volume resistivity Surface resistivity
Test method DIN EN ISO 527 DIN EN ISO 527 DIN EN ISO 527 DIN EN ISO 179 DIN EN ISO 868 Test method DIN 52612-1 DIN 53752 Average Average Test method IEC 60250 IEC 60250 DIN EN 62631-3-1 DIN EN 62631-3-2
Unit MPa % MPa kJ / m2 scale D Unit W /(m • K) 10¯⁶/k °C °C Unit Ω * cm Ω
Value 45 15 300 2 79 Value 0,2 80 0…60 70 Value 3 0,02 1015 1013
Material data is collected in good faith from our suppliers, alternatively from raw material manufacturers, and may differ depending on the test method used. To ensure the respective value. Nordic Plastics Group disclaims all responsibility in connection with the use of the data
Nordic Polytech Group, Omvägen 17, SE-231 61 Trelleborg, Sweden. Tel +46 (0)10-707 80 00 www.npgroup.se Version: 2022