PPSU MG Product characteristics Very good sterilisability High heat deflection temperature ISO 10993 tested on semi-finished product Product applications Medical engineering
General properties Density Water absorption Flammability (thickness 3mm/ 6mm)
Test method DIN EN ISO 1183-1 DIN EN ISO 62 UL 94
Unit g/cm³ %
Mechanical properties Yield stress Elongation at break Tensile modulus of elasticity Notched impact strength Thermal properties Thermal conductivity Coefficent of linear thermal expansion Service temperature, long term Service temperature, short term (max.) Heat deflection temperature Electrical properties Dielectric constant Volume resistivity Dielectric strenght
Test method Unit DIN EN ISO 527 MPa DIN EN ISO 527 % DIN EN ISO 527 MPa kJ / m2 DIN EN ISO 179 Test method Unit DIN 52612-1 W / (m • K) DIN 53752 10¯⁶/k Average °C Average °C DIN EN ISO 75, Verf. A, HDT °C Test method Unit IEC 60250 DIN EN 62631-3-1 Ω * cm IEC 60243 kV/mm
Value 1,29 0,6 V0 /V0 Value 77 30 2500 10 Value 0,35 55 -50 … 180 210 205 Value 3,44 1015 15
Material data is collected in good faith from our suppliers, alternatively from raw material manufacturers, and may differ depending on the test method used. To ensure the respective value. Nordic Plastics Group disclaims all responsibility in connection with the use of the data
Nordic Polytech Group, Omvägen 17, SE-231 61 Trelleborg, Sweden. Tel +46 (0)10-707 80 00 www.npgroup.se Version: 2022