PET G Clear Thermal properties
Test method
Unit
Value
VICAT-Temperature (method B 50)
DIN EN ISO 306
°C
70
Heat Deflection Temperature (A/ B)
DIN EN ISO 75-2
°C
72/68
DIN EN ISO 11357-4
J/gK
1,1
DIN 53752, ISO 11359-2
mm/m °C
0,068
DIN 52612, DIN EN ISO 22007-1
W/mK
0,2
Degradation temperature
°C
>280
Max. service temperature continuous use
°C
60
Max service temperature short term use
°C
70
Forming temperature
°C
120-160
Specific Heat Capacity Coefficient of linear thermal expansion Thermal conductivity
Electrical Dielectric constant (100 Hz)
IEC 250, DIN 53483-2
2,6
Volume Resistivity
IEC 60093 DIN EN 62631-1-3-1 ASTM D 257
Ωm
10 15
Surface Resistivity
IEC 60093 DIN EN 62631-1-3-2 ASTM 0257
Ω
10 16
Dielectric strength
IEC 60243-1, ASTM D149
kV/mm
16
Flexural Strength Tensile Modulus Tensile Strength Elongation Impact strength - lzod (notched) Impact strength - Charpy (notched) Impact strength - Charpy (unnotched) Optical properties Light transmisssion (3 mm) Refractive index
DIN 53483-2, IEC 250 Test method DIN EN ISO 1183 EN ISO 2039-1, ASTM 0-785 Test method DIN EN ISO 178 DIN EN ISO 178 DIN EN ISO 527-2 DIN EN ISO 527-2 DIN EN ISO 527-2 DIN EN ISO 180/4A DIN EN ISO 179-1/1eA DIN EN ISO 179-1 Test method DIN EN ISO 13468-1 DIN EN ISO 489
Unit g/cm³ R-scale Unit MPa MPa MPa Mpa % kJ / m2 kJ / m2 kJ / m2 Unit % ND 20
0,01 Value 1,27 105 Value 1900 70 2000 50 60 11,5 7 NB Value 88 1,57
Haze
ISO 14782, ASTM D1003
Dissipation factor (50 Hz) General properties Density Rockwell hardness Mechanical properties Flexural Modulus
Solar energy transmittance g- value Other properties Fire performance (building product) up to 10 mm
Fire performance (building product) 3 mm Biocompatibility (skin contact)
EN 410
% % Unit
<1 3 mm_82,4 10mm_79,4
Test method Value DIN 4102-1 B1 Technical Approval BP -VO 305/2011, EN13501-1 Classification B1-s2-d0 DIN EN 10993-5 Classification not cytotoxic
Material data is collected in good faith from our suppliers, alternatively from raw material manufacturers, and may differ depending on the test method used. To ensure the respective value. Nordic Plastics Group disclaims all responsibility in connection with the use of the data
Nordic Polytech Group, Omvägen 17, SE-231 61 Trelleborg, Sweden. Tel +46 (0)10-707 80 00 www.npgroup.se Version: 2022