PET Product characteristics Exellent dimensional stability Very low moisture absorption Exellent creep behavior Product applications Mechanical engineering Ship building Electrical industry
General properties Density Water absorption Flammability (thickness 3mm/ 6mm)
Test method DIN EN ISO 1183-1 DIN EN ISO 62 UL 94
Unit g/cm³ %
Mechanical properties Yield stress Elongation at break Tensile modulus of elasticity Notched impact strength Shore hardness Thermal properties Melting temperature Thermal conductivity Thermal capacity Coefficent of linear thermal expansion Service temperature, long term Service temperature, short term (max.) Heat deflection temperature Electrical properties Dielectric constant Dielectric dissipation factor (50Hz) Volume resistivity Surface resistivity Comperative tracking index Dielectric strenght
Test method Unit DIN EN ISO 527 MPa DIN EN ISO 527 % DIN EN ISO 527 MPa kJ / m2 DIN EN ISO 179 DIN EN ISO 868 scale D Test method Unit ISO 11357-3 °C DIN 52612-1 W /(m • K) DIN 52612 kJ /(kg• K) DIN 53752 10¯⁶/k Average °C Average °C DIN EN ISO 75, Verf. A, HTD °C Test method Unit IEC 60250 IEC 60250 DIN EN 62631-3-1 Ω * cm DIN EN 62631-3-2 Ω IEC 60112 IEC 60243 kV/mm
Value 1,38 0,3 HB / HB Value 85 15 3000 2 84 Value 255 0,28 1,10 60 -20 … 115 180 80 Value 3,4 0,001 1018 1016 600 20
Material data is collected in good faith from our suppliers, alternatively from raw material manufacturers, and may differ depending on the test method used. To ensure the respective value. Nordic Plastics Group disclaims all responsibility in connection with the use of the data
Nordic Polytech Group, Omvägen 17, SE-231 61 Trelleborg, Sweden. Tel +46 (0)10-707 80 00 www.npgroup.se Version: 2022