PE 500 Reg Confetti Product characteristics Physical properties Molecular-weight Density Notched impact strength Abrasion-Index (Sand-Slurry) Tensile strength at yield (1 B - 50mm/Min.) Elongation (Break / 1 B - 50mm/Min.) Tensile-E-modulus (1B - 1mm/Min.) Static Friction Dynamic Friction Shore-D-Hardness, 3 sec. value 6 mm plate Ball indentation hardness Water absorption
Thermal properties Melting Point (DSC) Thermal Conductivity Max. operation temperature Coefficient of thermal expansion (23 - 80°C) Electrical properties Volume resistivity Surface resistivity ATEX-Directive - TOV approved! ESD-D Burning properties Fire resistance (Self-classification) Fire resistance (Self-classification) properties
Test method k.a.
Unit
Value
0,5 Mio. g/mol. 0,5 Mio. g/mol.
3 3 DINENISO 1183-1,, ASTM D792 > 0.950 g/cm > 59.306 lb/ft
DINENISO 21304-2 DINENISO 15527
>15 kJ/m2
250-450 >20 N/mm2 DINENISO 527-2, ASTM D 638 DINENISO 527-2 ASTM D 638 >50 % 2 DINENISO 527-2, ASTM D 638 >900 N/mm
>7,1325 ft-lb/in2
250-450 >2900 psi >50 % 130500 psi 0.16-0,22 0.10-0,17 64-68 D 6960 psi < 0.01 %
ASTM D 1894 ASTM D 1894 DINENISO 868 DINENISO 2039 DINENISO 62
0.16-0,22 0.10-0,17 64-68 D 48 N/mm2
Test method DINENISO 11357-1 Wire method Literature ISO 11359 Test method DINEN 62631-3-1 DINEN 62631-3-2 ATEX-Directive
Unit Value 133-137°C 271,4- 278,6°F -0.41 W/m*K2.84253 (BTU-in)/hr-ft2 80 ·c 176 °F
Test method DIN 4102 UL 94 Test method
< 0.01 %
0,00015-.0.00020mm/mm0,000083-0.000111 in/in °F
Unit
Value
1.0E14 Ohm*cm 1.0E14 Ohm*cm
1.0E13 Ohm
1.0E13 Ohm
Ohm Unit B2 Klasse HB Klasse Unit
Ohm Value B2 Class HB Class Value
Food compliant Material data is collected in good faith from our suppliers, alternatively from raw material manufacturers, and may differ depending on the test method used. To ensure the respective value. Nordic Plastics Group disclaims all responsibility in connection with the use of the data
Nordic Polytech Group, Omvägen 17, SE-231 61 Trelleborg, Sweden. Tel +46 (0)10-707 80 00 www.npgroup.se
Version: 2022