17 362 manual,parts,e mag rev a

E-SERIES MAGNUM PARTS MANUAL

Effective S/N: DJ-2916-E Release: A

Document Number: 17-362

First Release:

February, 2012

Norfield Industries P.O. Box 459 Chico, Ca. 95927 Technical Support: (530) 891-4214 - Parts: (800) 824-6242 Serial No: _____________________ Date Sold: _____________________

Norfield Industries is the name that represents Quality, Reliability, Support, Innovation

and True Customer Service. We have been dedicated to providing quality products and excellent customer service for more than 40 years. Norfield Industries has earned a reputation in the pre hanging industry for setting standards for reliable machinery, full technical support, machine parts, full line industrial woodworking tools and supplies and a team of customer care representatives to support you! Our factory-trained technical personnel are ready to assist you on the telephone or in your shop.

This Page is Intentionally Blank

TABLE OF CONTENTS Safety Lockout Procedures Restoring Equipment and/or Circuits to Service Specifications Parts Replacement Policy Limited Warranty Contact and Order Information Part and Assembly Schematics

7 11 12 13 10 15 16 17

This Page is Intentionally Blank

SAFETY

SAFETY Safety considerations are an important element of machine installation and operation. Actively maintaining a safety mindset about yourself and others while working around or on the equipment is of primary importance. Operators and maintenance personnel should refer to the safety information on the following pages to familiarize themselves with warning labels and practices providing for safe operation and servicing of this machine.

Danger indicates an imminently hazardous situation, which if not avoided WILL result in death or serious injury.

Warning indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

Caution indicates a potentially hazardous situation which, if not avoided MAY result in minor or moderate injury. It may also be used to alert against unsafe practices.

Caution, without the safety alert symbol, indicates a potentially hazardous situation which, if not avoided MAY result in property damage but not personal injury.

Notice indicates important information that if not followed may CAUSE damage to the equipment.

Mandatory Action conveys an action step that should be taken to avoid the hazard.

SAFETY

Do not operate this machine unless all guards are in place and working correctly. If any guards or hazard labels are missing or damaged call Norfield’s Service Department immediately and request a replacement at (800) 824-6242.

Read and understand the operator’s manual before using this machine. Failure to follow proper operating instructions could result in death or serious injury.

This machine, when in operation, produces wood chips and dust. The operator and all persons in the work area MUST wear approved eye protection with permanently attached, rigid plastic side shields. These safety glasses must conform to ANSI Z87.1 standards and will have “Z87” printed on the lens.

This machine, when in operation, produces a noise level greater than 85dB. The operator and all persons in the work area MUST wear approved hearing protection. OSHA has determined that a noise level in excess of 85dB average in 8 hours can cause permanent hearing damage. We recommend that hearing protection be worn even if the decibel level is below 85dB. Certain types of wood dust can cause allergic reactions. Sawdust has been determined to be a Group A carcinogen by the International Agency for Research on Cancer (IARC). A dust collection system or an approved personal dusk mask MUST be used when operating this equipment.

This machine has moving parts that loose clothing and long hair can become entangled in. Take care not to become caught between the work material and the feed mechanisms or any other moving components.

Before beginning any service repairs, general maintenance, or adjustments you MUST follow proper Lockout Tag-Out procedures. OSHA regulation 1910.147 establishes a minimal lockiout tag-out procedure to assist employers in the development of their own procedures.

Only trained personnel that have read and understand the operator’s manual and all the safety precautions may operate this machine.

SAFETY

Inspect the machine at the beginning and end of each shift for damaged or cracked components such as, but not limited to, saw blades, router bits, drill bits, and boring bits.

Never leave this machine unattended while it is in operation. Make sure that all electrical and air is in the off position when the machine is not in use or is unattended and that any cutting blades have come to a complete stop.

Do not attempt to clean material from this machine until all the cutting blades have come to a complete stop. Even when the machine has been turned to the “off� position it may take up to several minutes for the blades to coastdown to a complete stop.

Woodworking machinery is inherently dangerous, common sense and good safety practices are your best defense against injury.

If you have any questions regarding the correct operation of the machine and safety procedures in this manual call the Norfield Industries Service Department at (800)-824-6242

This Page is Intentionally Blank

10

SAFETY

LOCKOUT PROCEDURES The following is an example of the minimum requirements for a lockout/tagout procedure. Norfield strongly recommends that your company establish its own written procdeure. OSHA Regulation 1910.147 establishes a minimal lockout/tagout procedure to assist employers in the development of their own Lockout Procedures

All employees will comply with these procedures. All equipment and/or circuits will be locked out to protect against accidental or inadvertent operation when such operation of the equipment and/or circuits could cause injury to personnel. Do not attempt to operate any switch, valve, or other energy isolating device bearing a lock.

Lockout Responsibility The primary responsibility for the proper lockout of equipment and /or circuits on a maintenance or repair project belongs to the project Supervisor and/or Foreman. However, this does not alleviate any sub-contracted maintenance or repair personnel from insuring that proper lockout/tagout procedures are followed at all times. The Supervisor and/or Foreman will insure that each employee is properly instructed in the safety significance of lockout procedures.

Preparation for Lock-Out of Circuits and Equipment In the following steps, when more than one individual is involved with the project and required to lock out the equipment and/or circuits, each employee will place their own personal lock on the energy isolating devices. A lock for each individual involved is the preferred method for locking out energy sources. If this not feasible, the designated individual to the work crew (e.g. the project Supervisor or Foreman) with complete knowledge of who is on the crew may be designated by the work crew as the individual responsible for carrying out all steps of the lockout procedure. That individual will inform the work crew when it is safe to work on the equipment and/or circuits. Additionally, the designated individual will not remove a crew lock until it has been verified that ALL individuals are clear.

1. Notify all affected employees and customers that a lockout is required and the reason for it.

2. If the equipment is in operation, after obtaining approval, shut it down by the normal stopping procedures.

11

SAFETY

3.

Operate the switch, valve or other energy isolating devices so that all energy sources (electrical, mechanical, pneumatic, hydraulic, etc.) are disconnected or isolated from the equipment and/or circuits. Stored energy, such as that in capacitors, springs, elevated machine members, rotating flywheels, hydraulic systems, and air/gas, steam or water pressure, etc., must also be dissipated or restrained by methods such as grounding, repositioning, blocking, bleeding down, etc.

4. All affected employees are then required to lockout the energy devices with their individual lock.

5. After insuring that no personnel are exposed and as a check on having disconnected the energy sources, operate the push button or other normal operation controls to make certain the equipment will not operate. In the event that electrical circuits have been locked out, insure that the circuits are de-energized by applying an appropriate voltage tester that itself has been tested on live circuits. Be sure to return all operating controls to the neutral position.

The equipment and/or circuits are now locked out.

Restoring Equipment and/or Circuits to Service 1.

When the job is complete and the equipment or circuits are ready for testing or normal service, check the equipment and/or circuits to insure that no one is exposed.

2.

When the equipment and/or circuits are clear, remove all locks. The energy isolating devices may be operated to restore energy to the equipment and or circuits.

12

SPECIFICATIONS

SPECIFICATIONS Electrical Supply Requirements AC Line Voltage

Phase

Hertz

Amperage

Comment

208/230 208/230

3

60

40

With Vacuum

3

60

30

Without Vacuum

230/115

1

60

30

--------

Air Requirements PSI

SCFM

Minimum Supply Pipe I.D.

90

2.2 8.5 w/ optional air screwdriver

1/2” I.D. minimum air line when less than 20 feet from compressor OR 3/4” I.D. minimum when more than 20 feet from compressor.

3 Phase Motor Specifications Application

Motor

Part Number

HP

Volts

Amps

Lock Drill

Norfield

6801-021

2

208/230

5.9/5.9

Latch Drill

Norfield

6802-032

1

208/230

3.1/2.8

Sander

Baldor

15-146

1

208/230

3.1/2.8

Cutterhead

Baldor

15-147

5

208/230

12.9/11.7

Elevator

Dayton

15-154

1/3

208/230

1.7/1.7

Single Phase Motor Specifications Application

Motor

Part Number

HP

Volts

Amps

Powerfeed

Dayton

15-360

1/15

DC Volts

.75

ButtRouter Motor

Dewalt

15-174

1-1/2

115

11

Faceplate Router

Dewalt

15-174

1-1/2

115

11

Machine Cycle Rate

30 Doors/Hour

Shipping Weight

Approx. 2600 Lbs

Minimum Floor Space Requirement

Width - 7’-5” Length - 26’-4” Height - 8’-9”

13

SPECIFICATIONS

Machine Capabilities Door Width

1’-0” - 4’-0”

Door Height

Up to 9’-0”

Door Thickness

1-3/8” - 2-1/4”

Jamb Width

2-1/2” to 10-1/2”

Jamb Length

Up to 9’-0”

Jamb Thickness

1/2” - 1-5/8”

Stop Thickness

1/2” Maximum

Butt Spacing

Variable: 6-1/2” Minimum from top of Door

Butt Radius

1/4” & 5/8”

Butt Size

3-1/2”, 4”, 4-1/2” & 5”

Lock Backsets

2-3/8” to 2-3/4”

Faceplate Routing

Up to 1-1/4” x 2-3/4”

14

WARRANTY

PARTS REPLACEMENT POLICY The following will explain Norfield Industries’ policy for handling warranty claims. Our “Limited Warranty” is stated below for your reference.

Our warranty covers the replacement of defective parts: however, the labor to replace the parts on the machine is not included.

Upon notification of a warranty claim, Norfield will either refer the customer to a regional repair facility or replacement parts will be shipped from the factory. Parts shipped from the factory will be invoiced to the customer’s account until the warranty claim is verified. To obtain verification, the defective parts must be returned to Norfield within thirty (30) days from the date of the claim for inspection. Before returning the defective parts, please contact Norfield to obtain a “Return Material Authorization Number”.

All parts manufactured by Norfield and found to be defective will be given appropriate credit. All parts not manufactured by Norfield are covered by their respective manufacturer’s warranty and will be sent to the original manufacturer for credit. When, and if, credit is issued to Norfield, we will in turn issue credit to your account.

LIMITED WARRANTY Norfield warrants any and all such parts manufactured by them against defects in material or workmanship for a period of one year from the date of purchase. Norfield’s liability under this warranty shall be limited to replacing free of charge, F. O. B. Chico, California, any parts proved to be defective within the period of the warranty. Norfield will not be responsible for transportation charges or consequential damages.

Norfield will not in any case or under any circumstances be liable or responsible for any injuries to persons or property suffered as a result of the use or operation of the machine, or losses or costs resulting from any period of non-operation for any reason.

Parts which are claimed to be defective, but show tangible evidence of abuse or negligence will not be replaced on a no-charge basis.

Norfield reserves the right, at its own discretion without notice and without making similar changes in machinery previously manufactured, to make changes in material, design, finish and/or specifications.

Any changes, alterations or installation of additional equipment to this machine without first obtaining written consent from Norfield may void this warranty. Determination of the effect of any alteration on this warranty is left to the discretion of Norfield.

Norfield makes no written or implied warranty with respect to electrical equipment, including motors or other purchased components used in the manufacture of the machine. All such parts are covered by their respective manufacturer’s warranty. We do endeavor, at all times, to purchase only those components manufactured by responsible manufacturers which we have found to be reputable in their handling of warranties.

Norfield expressly disclaims any warranty, expressed or implied, other than those which are expressly made in this limited warranty.

15

WARRANTY

CONTACT & ORDER INFORMATION Norfield Industries is the name that represents Quality, Reliability, Support, innovation and True Customer Service. We are dedicated to providing world class customer care. Norfield has been providing quality care in the pre-hanging door industry for over 40 years and has earned a reputation for setting the standard for innovation, reliability, full technical support, machine parts and a full line of industrial woodworking tools and accessories. Our team of Customer Care Representatives is available to support you.

If you need to contact the Norfield Service department, please have the following information available: • Serial Number of the machine.

• Model of the Machine.

• Date of purchase or date that the machine was installed.

• Voltage of the machine.

• A description of the problem and in what part of the machine the problem is occurring.

For warranty issues and service questions contact the Norfield Service Department at (800) 824-6242.

To order replacement components and consumables, such as drill and router bits, saw blades and other accessories, contact a Norfield Tools and Supply Customer Care Representative at (800) 824-6242.

16

ASSEMBLY SCHEMATICS

PARTS AND ASSEMBLY SCHEMATICS TABLE OF CONTENTS General Assembly (Front) General Assembly (Rear) Infeed Bed Assembly Door Support & Rollers Sizer Assembly Sander Assembly Undercut Reference Assembly Powerfeed Assembly Edge Prep Module Edge Prep Shift Assembly Latch Drill Lock Drill Faceplate Router Faceplate Router Stop Main Door Clamp Door Clamp Width Index Assembly Width Index Motor and Gearbox Main Bar & Index Bar Jamb Lift & Tilt Jamb Support Jamb Clamps Sizer/Powerfeed Guard Edge Prep Guard Operator Control Panel Main Electrical Panel Auxiliary Electrical Panel Foot Pedal Switches Filter-Regulator-Lubricator Manifold Valves Butt Router T-Track Optional Predrill and Screwdriver

18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 52 53

17

18

OPERATOR CONTROL PANEL

CUTTERHEAD POWERFEED SANDER

INFEED BED

UNDERCUT REFERENCE ASSEMBLY

TRAM RAIL

BUTT ROUTER FOOT PEDAL SWITCHES

GENERAL ASSEMBLY (FRONT)

LOCK DRILL LATCH DRILL FACEPLATE ROUTER

WIDTH INDEX SCALE

DOOR ROLLERS

HARDWARE TRAY

6904-800

FILTER REGULATOR LUBRICATOR

ASSEMBLY SCHEMATICS

FILTER REGULATOR LUBRICATOR LOCK DRILL

GENERAL ASSEMBLY (REAR)

FORKLIFT POCKETS

SECONDARY ELECTRICAL PANEL

WIDTH INDEX MOTOR

6904-800

CUTTERHEAD MOTOR

MAIN ELECTRICAL PANEL

ASSEMBLY SCHEMATICS

19

18

6

2

15

19

3

7

22

4

1

16

14

13

20 21

23

14

INFEED BED

17

9

20

12

11

8

5

10

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

PART NUMBER ***** 0001-706 0046-101 0057-008 0057-100 0058-100 0058-101 0058-102 0085-002 10-1191 10-1192 10-1193 12-038 12-084 12-109 12-402 6803-014 6803-015 6803-108 6803-110 9013-300 9072-075 9520-100

1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 2 1 1 1 1 1 6904-814B

QTY

DESCRIPTION 3/4" Solid Shaft Collar Infeed Roller Assembly Infeed Link Brake Plate Infeed Support Weldment Infeed Bed Eccentric Lever Eccentric Lever Handle Mac 431A-BOC-DM-DJAJ-1KA Watts 14R0B3FC Regulator Watts 274Z160S Dodge 096036 Torque Tamer Aurora CW-8 Rod End Thrust Washer Dodge #25 Torque Tamer Bushing Connecting Rod Modified Shoulder Bolt Infeed Lever Weldment Axle Weldment SPACER Square Key, .18 x .75 Redi-Thread

ASSEMBLY SCHEMATICS

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

18

PART NUMBER 0036-004 0037-002 0037-008 0058-005 0170-100 0170-101 13-1152 6803-029 6807-003 6807-004 6807-035 6807-054 6807-129 6904-064 6904-065 6904-066 6904-128 9511-200 SC-1-0.75

14

DESCRIPTION Clamp Wedge Roller Axle, Short Roller Axle, Long Nylon Flange Steel Roller Steel Roller Jergens 10912 Ball Plunger Outfeed Bed Roller Flange Roller Roller Support Roller Spacer Roller Mount Wear Strip Spacer Infeed Wear Strip Wear Strip Spacer 4 Inch Vacuum Flange REDITHREAD 3/8-16 x 2" 3/4" Clamp Collar

15

QTY. 1 4 1 1 4 1 2 1 2 2 8 5 2 1 1 1 1 7 5

8

5

12

2

11

DOOR SUPPORT

19

1

9 17

4

6

6904-809

3

13

ASSEMBLY SCHEMATICS

21

17

22

3

2

12

15

5 16

9

11

10

SIZER ASSEMBLY

14

4

1

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PART NUMBER 0001-726 0025-004 0176-001 11-254 12-307 12-308 12-309 12-544 13-1071 13-1073 13-1073 13-465 15-135 15-147 6803-109 6810-030 *****

DESCRIPTION

6904-814A

Cuterhead Mandrel Spacer Shroud Cover 4" Hose Clamp Dodge 1610 Taper Lock Bushing Martin 13V300TB Pulley Martin 1108 3/4 Tapperd Bushing Goodyear 3VX355 V-Belt WOO1017 4" Elbow 4" VACUUM HOSE X 4" 4" VACUUM HOSE X 6" 2-1/2" Cutterhead Complete Dayton 3M280 Motor Base Baldor 5HP Motor M3613T Vacuum Shroud Balanced Pulley 3/4-10 LH Jamb Nut

13

8

6

7

1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1

QTY.

ASSEMBLY SCHEMATICS

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

*

2

PART NUMBER ***** ***** ***** 0040-001 0040-008 12-001 12-044 12-047 12-096 12-114 12-429 13-220 13-223 13-381 15-0176 6803-002 6803-003 6803-009 6803-012 9072-100 9072-187 9514-1550 SC-1-0.75 SC-S-0.625

1

13

12

DESCRIPTION 5/8" FLAT WASHER 5/8-11 Hex Nut LH 5/8-11 Hex Jamb Nut Slide Shaft Spacer Gates AA-51 Belt Dodge BK28X x 3/4" Pulley Dodge BK27X x 7/8" Pulley Browning VPLE112 Bearing Bunting EF101212 Bushing Fafnir 010-10874 Pulley Merit K-061 1" Sanding Wheel Merit RB-68 Reducer Bushing Reid STT-14T Knob Grainger 1HP Motor 3KW91 Long Shaft Short Shaft Sander Bearing Plate Idler Pulley Mount Square Key Square Key Sander Adjusting Rod 3/4" Clamp Collar 5/8" Solid Shaft Collar

17

5

QTY 4 1 1 2 2 1 2 1 4 1 1 2 4 1 1 1 1 1 1 2 1 1 3 1

9

16

SANDER

18

24

19

4

22

23

10

14

15

7

6904-814D

20

11

8

21

6

ASSEMBLY SCHEMATICS

23

24

5

4

3

8

7

6

13

6

12

9

15

2

UNDERCUT REFERENCE ASSEMBLY

1

10

11

14

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART NUMBER ***** 0034-001 0035-001 0035-002 0035-004 0035-102 0037-009 0058-005 0072-103 12-087 12-088 13-634 22-006 22-026 6803-024

6901-712

3/4" Solid Shaft Collar Holdover Casting Main Index Mark Bracket Index Tab Axis Pin Bushed sleeve Roller Nylon Flange Restricting Plate Weldment Jergens 32704 Clevis Pin Jergens 45304 3/8" Clevis Wheel Lane #67 Spring Lane # 19 Spring Undercut Ref. Base Plate

DESCRIPTION 4 1 1 1 2 2 2 1 1 1 1 1 2 1 1

QTY

ASSEMBLY SCHEMATICS

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PART NUMBER 10-1188 10-1267 10-1284 10-396 12-017 12-557 13-1178 15-360 22-009 6057-005 6803-008 6803-100 6803-112 6803-113 6803-119 6803-120 6807-117

9

13

DESCRIPTION Bimba D-166-1 Clevis Flow Control Bimba D-13498-A Brkt Bimba 092-DX Cylinder Nachi R6-2RS Bearing #605 Woodruff Key 10" POWERFEED WHEEL DAYTON 1LPK8 GEARMOTOR Lane #311 Spring Axle Hinge Shaft Pivot Bushing Guard Support Bracket Cutter Head Guard Hinge Plate L.H. Hinge Plate R. H. Main Mounting Bracket

14

10

QTY. 2 4 2 2 1 2 2 2 1 1 1 4 1 1 1 1 1

5

11 12

POWERFEED

15

7

17

8

6

16

2

3

6904-814C

1

4

ASSEMBLY SCHEMATICS

25

26 5

EDGE PREP MODULE

PAGE 30

PAGE 28

PAGE 32

3

4

2

7

9

PAGE 31

ITEM NO. 1 2 3 4 5 6 7 8 9

PART NUMBER 6904-700 6904-701 6904-702 6904-812 6904-705 6904-703 6904-118 6904-102 6904-103

1

PAGE 27 6

DESCRIPTION Edge Prep Shift Assy LATCH DRILL ASSEMBLY Faceplate Router Assembly Main Door Clamp FPR Stop Assy.

Lock Drill Assembly Edge Prep Dust Collection Port RH Main Support LH Main Support

8

PAGE 29

6904-810

QTY. 1 1 1 1 1 1 1 1 1

ASSEMBLY SCHEMATICS

10

18

11

3

9

4

1 2

6

EDGE PREP SHIFT ASSEMBLY

13

16

17

8

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

15

7

14

PART NUMBER 10-1355 10-562 12-355 4640-005 6904-002 6904-004 6904-005 6904-006 6904-007 6904-010 6904-012 6904-028 6904-032 6904-055 6904-100 6904-106 6904-130 8825-009

6904-700

DESCRIPTION QTY. SMC NCDME150-1000-H7A1LS Cyl. 1 SMC FLOW CONTROL,1/4T X 1/8P 2 Super 16 Bearing 4 Alignment Insert Nut 1 Edge Prep Top Plate 1 Latch Drill Side Plate 1 Edge Prep Slide Rod 2 Bottom Plate 1 Bearing Block 4 LH End Plate 1 X-Axis Drive Plate 1 RH End Plate 1 Stop Tab 4 Deflector 1 Latch Drill Mount Bracket 1 FPR STOP BAR 1 BRUSH, 4" 1 Alignment Insert 1

12

5

ASSEMBLY SCHEMATICS

27

28

12

SEE NOTE #1

2

4

5

3

NOTES: 1 TO ORDER CYLINDER ONLY, USE PART NUMBER 10-1299

7

7

8

LATCH DRILL

11

***** 10-1230 10-1231 10-1288 10-1292 13-1255 6800-041 6802-001 6802-032 9072-050 13-1251 10-1262

8 9 10 11 12

PART NUMBER

9

1 2 3 4 5 6 7

ITEM NO.

10

1

6

DESCRIPTION

Latch Drill Chuck Modified Latch Drill Motor Key Leuco 1730820 1" Bit w/ Insert BIMBA T-316-EB2MNP

1 1 1 1 1

2 3 3 3 2 1 2

QTY.

6904-701

5/16-24 X 1/4" Socket Set Screw Switch Bracket Clamp Reed Switch Flow Control NOR1730821 Carbide Insert Bracket

ASSEMBLY SCHEMATICS

32

34

A

9

31

25

20

24

28

DETAIL A

17

21

3

29

33

30

12

22

16

8

27

13

19

LOCK DRILL

10

2

14

26

11

18

23

1

4

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

PART NUMBER 0011-006 0011-007 10-1196 10-1228 10-1230 10-1231 10-1288 10-696 13-612 3812-003 3860-005 6801-001 6801-008 6801-021 6801-028 6904-017 6904-019 6904-020 6904-022 6904-023 6904-056 6904-057 6904-104 6904-119 6904-120 9073-125 9511-100 9513-450 NOR 161 NOR 168 NOR12262 NOR16051 NOR164 NOR7764

6

5

7

QTY 2 2 1 1 3 3 3 4 1 1 1 1 1 1 1 1 1 1 1 2 1 1 4 1 1 1 2 2 1 2 2 1 4 2 6904-703

DESCRIPTION Slide Shaft Support Shaft SMC NCQ8B250-100 Cyl. Bimba M-314-DXPBW Cylinder Switch Bracket Clamp Reed Switch SMC, NAS2201-N02-03S 2-1/8" Insert Lock Drill Bit CYLINDER SHAFT INSERT CYLINDER NUT Lock Drill Mount Lock Drill Chuck Modified Lock Drill Motor Back Plate Lock Drill Front Plate Chip Deflector Plate Lock Drill Base Plate Drive Block Backset Shaft Lock Drill Top Mount Brkt MODIFIED ROD END Bearing Block Backset Slide Bar Backset Slide Bar Square Key 3/8-16 x 1" Redithread Stud 1/2-13 X 4-1/2"" REDITHREAD Center Point Set Screw Scoring Spur Set Screw Scoring Spur Center Drill Raker Knive Insert Screw Raker Knive

8

15

ASSEMBLY SCHEMATICS

30

3

2

10

25

16

9

5

7

6

12

14

13

17

8

28

20

15

1

3

26

11

24

4

25

21

FACEPLATE ROUTER

23

22

18

19

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

PART NUMBER 10-1217 10-1408 10-562 12-082 12-844 13-567 13-735 15-174 4616-005 4616-006 5034-007 5051-005 6904-001 6904-003 6904-008 6904-009 6904-013 6904-014 6904-015 6904-016 6904-033 6904-034 6904-084 9011-062 9510-300 9511-525 9519-150 9519-187

QTY 1 1 4 1 4 1 1 1 1 1 1 2 4 1 1 1 1 1 2 2 2 1 4 1 2 2 1 1

6904-702

DESCRIPTION SMC NCDQ8BZ106-150-M9NLS CYLINDER SMV NCQ8A106-200 SMC FLOW CONTROL,1/4T X 1/8P 5/16-24 ROD END IGUS JUI-01-08 Bearing ROUTER BIT Shank, NOR664 DEWALT ROUTER MOTOR ALIGNMENT INSERT NUT Aligning Insert FPR Clamp Vertical Slide Rod Bearing Block FPR Mount FPR End Plate Y-Axis Drive Plate FPR Top Plate FPR Mount Pivot Mount Pivot Clamp Stop Disk Stop Mount FPR Slide Rod Spacer 5/16-18 x 3" REDI-THREAD 3/8-16 x 5-1/4" 5/16-24 x 1-1/2" Redi Thread 5/16-14 x 1-7/8" Redi Thread

ASSEMBLY SCHEMATICS

3

9

2

10

8

FACEPLATE ROUTER STOP

4

ITEM NO. 1 2 3 4 5 6 7 8 9 10

PART NUMBER ***** ***** ***** ***** 10-1107 21-132 21-134 6904-029 6904-031 6904-105

1

7

DESCRIPTION 10-24 x 1-1/2" SHCS 1/4-20 x 2" Hex Bolt 1/4-20 Hex Nut 5/16-24 Hex Jamb Nut SMC NCMR106-0100 Cyl. SMC KQ2H07-34S Fitting SMC KQ2L07-34S Fitting Sub Plate Square Stop Stop Carrier Weldment

5

6

6904-705

2 1 1 1 1 1 1 1 1 1

QTY.

ASSEMBLY SCHEMATICS

31

9

32

7

2 10

11

MAIN DOOR CLAMP

15

1

6

8

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART NUMBER ***** ***** ***** ***** ***** 6800-036 6904-021 6904-027 6904-058 6904-059 6904-060 6904-061 6904-085 6904-121 6904-704

4

13

QTY. 36 2 2 2 2 1 2 1 2 6 2 1 1 1 2 6904-812

DESCRIPTION #10-24 X 1/2" Flat Head Cap Screw 5/8 x 3-1/2" Socket Head Shoulder Bolt 1/4-20 x 5/8" SHCS 1/4-20 x 1/2" SHCS 8-32 X 1/4 SOCKET HEAD CAP SCREW Back Up Block Clamp Shoe Front Clamp Plate Modified Shoulder Bolt Clamp Pad Clamp Pad Clamp Wedge STOP PIN Wedge Mount Bracket Door Clamp

5

12

3

14

ASSEMBLY SCHEMATICS

6

2

9

18

7

17

15

8

4

DOOR CLAMP

5

16

11

13

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 12

PART NUMBER ***** ***** ***** ***** ***** ***** 10-1239 12-084 21-138 6800-005 6800-007 6800-045 6800-100 6800-101 6904-018 6904-024 6904-025 6904-026

3

1

6904-704

10

14

DESCRIPTION Ø3/8 X 5/8 Shoulder Bolt 1/4-20 x 3/4" SHCS 1/4-20 x 5/8" SHCS 3/8" Lock Washer 3/8-16 x 1-1/4" Hex Bolt Shaft Collar, 1PC Split, 0.75 Bimba 241-DW Cylinder 1/2" FEMALE ROD END Legris 3175-04-11 5/32" 1/8NPT Connector Side Plate Link Spacer Pivot Arm Long Clamp Shaft Clamp Cylinder Mount Front Bearing Plate Short Clamp Shaft Side Plate

QTY. 4 4 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1

ASSEMBLY SCHEMATICS

33

13

34

27

1

21

16

19

17

32

11

20

22

12

23

30

8

33

26

3

18

25

24

9 10

2

29

WIDTH INDEX ASSEMBLY

5

15

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

6

PART NUMBER ***** 11-543 13-588 13-594 19-116 6800-734 6801-010 6804-001 6804-002 6804-003 6804-005 6804-015 6804-020 6804-022 6804-023 6804-025 6804-101 6804-102 6804-104 6804-108 6804-110 6807-019 6904-068 6904-079 6904-080 6904-091 6904-107 6904-108 6904-112 6904-116 6904-813A 8030-001 9073-100

14

28

WIDTH INDEX MOTOR ASSEMBLY (SEE FOLLOWING PAGE)

31

4

DESCRIPTION QTY. 1" Clamp Collar 5 Omron D4C-1620 Limit Switch 2 Oregon Rule FN-W048VU-GTC Rule 1 Reid DK-45 Knob 1 Width Index Scale 1 SENSOR ASSEMBLY 1 Backset/Undercut Pointer 1 Width Index Post (Right) 1 Width Index Post (Left) 1 Width Index Post Bracket 4 Width Index Spacer 2 Idler Gear Spacer 2 Guide Wear Strip 2 Sensor Target 1 Sensor Target 1 Width Index Guide 2 Bushed Plate 3 Width Index Torque Tube 1 Width Index Gear Rack 2 Idler Gear 2 Bushed Plate 1 Width Index Guard 2 One Time Spacer 2 Pointer 1 Pointer Mount 1 Width Index Scale Mount 1 Width Index Carriage (Right) 1 Width Index Carriage (Left) 1 Tilt Cylinder Mount 1 Tilt Cylinder Mount 1 Width Index Motor Assembly 1 MODIFIED GEAR 2 Square Key 3 6904-813

7

ASSEMBLY SCHEMATICS

1

2

4

1

6

ITEM NO. 1 2 3 4 5 6 7

WIDTH INDEX MOTOR & GEARBOX

7

3

PART NUMBER 6804-103 6804-004 15-134 15-133 15-154 12-536 9073-100

DESCRIPTION Elevator Motor Mount Motor Spacer Winsmith 913MDDS061X0EK Boston Gear F715-10-B5-G DAYTON 3N842BA MOTOR Martin ML150 1 x 3/4" Coupler Square Key

5

6904-813A

2 1 1 1 1 1 1

QTY.

ASSEMBLY SCHEMATICS

35

36

16

17

7

15

PAGE 24

NOTES 1.

LEFT HAND STOP ASSY = 6800-707 RIGHT HAND STOP ASSY = 6800-710

A

2

13

9

1

10

8

5

See Note #1

11

Detail "A"

19

MAIN BAR & INDEX BAR

14

6

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

PART NUMBER ***** ***** 13-583 6800-710 6800-714 6805-016 6805-017 6805-019 6805-020 6805-021 6805-033 6805-051 6805-104 6805-105 6901-712 6904-053 6904-071 6904-081 9511-225

5

18

4

6904-711

12

DESCRIPTION 1/4-20 x 1" Flat Head Cap Screw 1/4-28 X 1/4 Set Screw Destaco #602 Clamp Right Door Stop Assembly Dead Bolt Stop Assembly Index Bar Sub Index Block (Pinned) Index Block (Red) Index Block (Yellow) Door Stop Jamb Stop Button Index Lock Pin Left Stop Block Jamb Stop Turret Undercut Ref. Assembly Main Bar Wear Strip Main Bar Index Lock 3/8-16 x 2-1/4" Redithread

3

QTY. 1 3 1 1 2 1 3 3 3 1 2 1 1 1 1 2 1 1 2

ASSEMBLY SCHEMATICS

14

25

23

21

29

33

37

13

31

12

27

17

26

18

24

19

32

9

PAGE 38

*

* 6

5

22

2

4

3

9

1

36 11

35

34

*

10

*

JAMB LIFT & TILT

8

16

7

28

21

30

37

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

PART NUMBER 10-1188 10-1251 10-163 10-341 10-346 10-406 10-661 10-678 12-084 12-108 12-386 12-494 12-537 13-045 21-035 21-168 6805-011 6805-044 6805-086 6806-031 6904-035 6904-036 6904-037 6904-038 6904-039 6904-042 6904-052 6904-069 6904-117 6904-126 6904-127 6904-811A 6906-001 6906-004 6906-006 9017-031 9510-200

6904-811

20

DESCRIPTION QTY Bimba D-166-1 Clevis 2 Pneumadyne SV11-125-44 Valve 1 Bimba D-129 Bracket 2 CYLINDER, 1" STROKE 2 Bimba D-620 Bracket 2 BIMBA 171-D CYLINDER 1 1/4" TUBE X 1/4" NTP FLOW CONTROL 4 Bimba 093-DXDE Cylinder 1 1/2" ROD END 4 THRUSH WASHER 4 Torrington CRS-10 Cam Follower 2 Ball Bearing 2 1/2" ROD END, LH 2 Ives 436pa28 Door Stop 1 Parker 216P-2 Nipple 1 1/8 PIPE 5/32" TUBE Y 2 Jamb Lift Link 2 Lift Lock Mount 1 Clamp Button 1 SAFETY BUMPER 1 Tilt Plate 2 Lift Connect Bar 1 Jamb Rack Upper Link 2 Tram Support 2 Axle 2 STOP BAR 2 Bearing Spacer 2 Tilt Spacer 2 Extended Tram Rail 1 Tilt Stop 1 Tilt Stop 1 1 Jamb Link Low 2 Jamb Link 2 Jamb Lift Mount 2 SPACER 2 5/16-18 x 2" REDI-THREAD 2

ASSEMBLY SCHEMATICS

37

38

6

9

PAGE 39

1

8

4

PAGE 39

JAMB SUPPORT

3

ITEM NO. 1 2 3 4 5 6 7 8 9

PART NUMBER 13-1067 13-638 6904-110 6904-708 6904-709 6906-102 6906-103 6906-701 6906-702

7

3

DESCRIPTION 8020 1530 EXTRUSION X 122" 80/20 5/16-18 SINGLE T-NUT Cam Guide Jamb Support Jamb Support JAMB SUPPORT MOUNT JAMB SUPPORT MOUNT Jamb Clamp Jamb Clamp

5

6904-811A

1 8 2 6 2 1 1 1 1

QTY.

ASSEMBLY SCHEMATICS

7

6

8

22

9

5

19

4

20

10

11

13

6906-701

3 2

14

15

1

18

JAMB CLAMPS

17

PART NUMBER ***** ***** ***** ***** ***** ***** ***** ***** ***** 10-1254 12-082 13-638 21-125 6805-025 6805-034 6904-043 6904-044 6904-046 6904-113 6904-114 6904-115 9011-043

6906-702 16

21

6906-703

DESCRIPTION 1/4" X 3/4" Dowel Pin 5/16-18 x 5/8" Button Head Cap Screw 1/4-20 x 5/8" FHCS 1/2" Belville Washer 1/2" Clamp Collar 5/16" Flat Washer 5/16" Lock Washer 5/16"-18 UNC x 1 1/4" SHCS 5/16-18 X 1-3/4" Flat Head Cap Screw Bimba 093-DX 5/16-24 ROD END 80/20 5/16-18 SINGLE T-NUT Muffler, 1/8 NPT Jamb Clamp Pad Modified Shoulder Bolt CLAMP SUB PLATE Cylinder Mount Block CLAMP SUB PLATE Clamp Pivot JAMB CLAMP JAMB CLAMP Spacer

JAMB SUPPORT EXTRUSION

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 QTY. 2 6 8 2 2 2 2 2 2 2 2 6 2 2 2 1 2 1 2 1 1 2

ASSEMBLY SCHEMATICS

39

40

ITEM NO. 1 2 3 4 5 6

PART NUMBER 6807-102 6807-110 13-584 6904-199 6904-082 6904-083

DESCRIPTION Cover Hinge Clamp Mount Destaco #331 Clamp Sizer Guard Bumper Bumper

1

4

5

QTY. 1 1 1 1 1 1

3

SIZER/POWERFEED GUARD

2

6

6904-707

ASSEMBLY SCHEMATICS

ITEM NO. 1 2 3 4 5

4

3

PART NUMBER 6904-125 6904-070 6904-078 6807-103 12-797 DESCRIPTION Edge Prep Guard Guard Ramp Bumper Short Cover Hinge Cycle Counter

1 1 1 1 1

QTY.

EDGE PREP GUARD

1

5

2

6904-712

ASSEMBLY SCHEMATICS

41

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PART NUMBER 11-1558 11-1560 11-1565 11-1566 11-1567 11-1575 11-1693 11-1694 11-1699 11-175 11-1951 11-746 11-795 13-1304 6904-076 6904-077 8342-002

42 10

3

9

11

16

DESCRIPTION

13

1 8 3 11 11 2 1 2 2 1 1 1 1 2 1 1 1

QTY. 4

4

2

8

2

5

6

5

4

3

5

OPERATOR CONTROL PANEL

Switch, Emergency Stop Contact Block, NC AB 800FP-SM22 SWITCH Contact Block, NO Latch AB 800FP-SM32 SWITCH AB 800FP-KM23 Key Switch AB 800 SERIES SWITCH SWITCH, START-STOP Fuse Holder Dart 15DV1A-104 DC Speed Control Mallory SC628N Buzzer BUSSMAN ABC-3 FUSE REID VPH-65 PULL HANDLE Pushbutton Station Operator Control Overlay E-Stop Warning Label

14

8 6

5

1 3

4

17

16

7

5

5

4

5

4

5

2 2 5

2 4

4

5 5

2 12

6904-600

15

ASSEMBLY SCHEMATICS

1

17

22

15

18

3

10

SEE NOTE 1 2

NOTES: 1 - PROGRAMMED MEMORY MODULE = PART # PROG-0034

21

19

4

6

11

4

6

12

20

8

MAIN ELECTRICAL PANEL

7

4

5

9

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

16

14

PART NUMBER 10-386 11-1418 11-1419 11-1426 11-1448 11-1520 11-1761 11-1863 11-1865 11-402 11-790 11-791 11-864 11-865 11-887 11-935 11-960 11-969 11-989 11-990 11-992 6904-074

13

1 1 1 3 1 2 1 1 1 1 1 1 1 4 14 1 10 5 1 1 1 1 6904-602

QTY

DESCRIPTION Pressure Sensor Allen Bradley 1762-L40 BWA Controller AB Memory Module 1762-MM1 Fuse holder Fuse,Bussman GMA-250MA Fuse, 3 Amp AB 100-SB10 Auxiliary, Contactor BREAKER 40AMP BREAKER 30AMP GROUND BAR AB 1492-SP1D200 20A Breaker AB 1492-SP1C100 10A Breaker Disconnect Actuator Extension Module Terminal Block Disconnect Switch AB Termial Anchor Terminal Block Barrier AB 100-C16D10 Contactor AB 100-C30L10 Contactor AB 100-C09D10 Contactor Electrical Panel (Primary)

ASSEMBLY SCHEMATICS

43

44

16

3

1

7

15

9

17 6

13

14

8

14

12

AUXILIARY ELECTRICAL PANEL

7

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

PART NUMBER ***** 6904-075 11-300 11-878 11-878 11-887 11-960 11-1812 11-888 11-1701 11-992 11-991 11-1813 11-790 11-649 11-1438 11-877 6810-059 25-015 11-969 11-741

11

7

QTY 1 1 1 2 3 5 3 1 2 1 1 1 1 2 1 1 23 1 1 1 1 6904-601

DESCRIPTION DIN RAIL (11-222) CUT TO 14" Electrical Panel (Secondary) AB 700-SH25GA12 Relay AB 1492-CJT5-10 3 Jumper AB 1492-CJT5-10 10 Jumper Terminal Block AB 1492-EA35 Terminal Anchor AB 193-ED1CB OVERLOAD Barrier, 3 CT AB 100-C16L10 Contactor AB 100-C09D10 Contactor AB 100-C12D10 Contactor AB 193-ED1DB OVERLOAD AB 1492-SP1D200 20A Breaker ITE GB14 Ground Bar Cycle Counter TERMINAL BLOCK, 3 CT HOFFMAN A122408LP AC Tech PV324 Drive Terminal Block Barrier JUMPER, 6mm, 5 POLE

10

2

19

ASSEMBLY SCHEMATICS

2

1

FOOT PEDAL SWITCHES

2

13-1305

DAYTON 1AGP8 GUARD

6904-604

ITEM PART DESCRIPTION NO. NUMBER 1 11-1800 DAYTON 1AGP4 FOOT SWITCH

1

1

QTY.

ASSEMBLY SCHEMATICS

45

46 6

4 3

2

1

PART NUMBER 10-1240 10-1241 10-1243 10-1244 10-1245 10-1242 Watts SV75-03 Shutoff Watts B75-03BJC Filter-Regulator Watts F71-03BJ Coalescing Filter Watts DK7510-3-2 Diverter Block Watts L75-03B Lubricator Watts 274Z160S Gauge

DESCRIPTION 1 1 1 1 1 1

QTY.

10-1274

REPLACEMENT ELEMENT STANDARD FILTER (ITEM #2) = 10-1296 REPLACEMENT ELEMENT COALESCING FILTER (ITEM #5 = 10-1297

FILTER-REGULATOR-LUBRICATOR ASSEMBLY

5

ITEM NO. 1 2 3 4 5 6

ASSEMBLY SCHEMATICS

10-760

10-1059

2

3

2

3

SMC VJ10-51-A-50 Wire

SMC, SY3140-3LOZ, Valve

ITEM PART DESCRIPTION NO. NUMBER 1 10-1152 SMC SS5Y3-41-09-N7 Manifold 9

9

1

QTY.

MANIFOLD VALVES

1

6904-714

AUXILIARY ELECTRICAL CABINET

ASSEMBLY SCHEMATICS

47

48

6

10

1

8

14

7

16

5

11

BUTT ROUTER

13

12

2

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

3

9

PART NUMBER 0039-005 11-009 11-010 11-034 15-174 19-012 19-016 19-017 19-018 19-021 6809-023 6809-040 6904-715A 6904-715B 6904-715C 6905-105

4

6904-715

Chip Shield Durakool G10Z-3 Switch Durakool P2008 Clip Cover Dewalt DW 616 Router Motor Label, Warning, Ear & Eye Label, Notice Pull Router Label, Warning Router Starts Label, Warning, Blade Hazzard Label, Warning Guard Removed Chip Breaker Outlet Box Butt Router Front Section Butt Router Center Section Butt Router Rear Section Pivot Block

DESCRIPTION

16

15

1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2

QTY

ASSEMBLY SCHEMATICS

9

10

7

2

3

4

17

18

8

5

BUTT ROUTER (FRONT SECTION)

11

15

14

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

6

12

13

PART NUMBER 0003-002 10-219 10-262 10-620 10-681 6809-006 6809-007 6809-008 6809-009 6809-010 6809-012 6809-024 6809-025 6809-028 6809-029 6809-032 6809-051 6809-052

16

QTY. 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 1 1 1 6904-715A

DESCRIPTION Flat Jamb Locator Humphrey 31P Valve Pneumatic Valve 1/8" NPT BIMBA F0-171.5 CYLINDER Clippard TV-4MP Air Valve Index Dog Butt Router Face Plate Clamp Plate Butt Router Handle Handle Bracket Reference Bar Clamp Bar Spacer Reference Bar Spacer Clamp Pivot Plate Pivot Retainer Offset Clamp Bar Spring Steel Wearstrip Clamp Pad

1

ASSEMBLY SCHEMATICS

49

50 6

4

23

5

12

3 1

20

BUTT ROUTER (CENTER SECTION)

10

2

21

14

15

11

19

16

8

24

ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

PART NUMBER 0001-004 0002-003 0002-006 0005-002 0006-004 0007-101 10-582 13-1021 21-170 6033-001 6033-100 6053-001 6053-100 6055-003 6807-126 6809-027 6809-055 6809-062 6809-074 6809-075 6809-076 6809-108 6905-050 6905-053 6905-106

25

18

9

7

QTY. 1 1 2 6 2 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 1

17

6904-715B

DESCRIPTION 1/2 Nylatron Spool Bushing Turret Stop Catch Slide Rod Stop Tab Nylatron Spool Bushing BUTT ROUTER TURRET Bimba 020.5-R Cylinder Handle Fitting Elbow 5/32" Spool Carrier Main Bearing Block Yoke Casting SLIDE CASTING Stop Support Handle Bracket Modified 2" Ferrule Pivot Lolck Pin Cylinder Mount BR Vac Casting For DW616 Router Casting Base Plate Pivot Bar Slide Rod Mounting Bracket Stop Catch

13

22

ASSEMBLY SCHEMATICS

0039-002 12-017

6809-045

6809-047

6809-048

6809-049 6904-092 6905-051

6905-052

9011-038

3

4

5

6 7 8

9

10

PART NUMBER

1 2

ITEM NO.

9

8

Round Spacer

Pivot Block Adjuster

Tram Roller Bit Alignment Stop Carriage

Bearing Mount Block

Bearing Mounting Block, (Top)

Tram R oller Spacer

Felt Wheel Nachi R6-2RS Bearing

DESCRIPTION

5

10

2

3

4

3 1 1

1

2

3

2 6

QTY.

BUTT ROUTER (REAR SECTION)

7

1

4

3

2

10

6904-715C

6

2

ASSEMBLY SCHEMATICS

51

5

1

52

T-TRACK ASSEMBLY

2

5

4

3

ITEM NO. 1 2 3 4 5 6

PART NUMBER 13-079 13-631 13-631 6807-020 6807-021 6807-115

DESCRIPTION Tool Hangar #29 Chain x 10" #29 Chain x 5" Short T-Track Long T-Track T-Track Support

6

6904-713

QTY. 2 1 1 1 2 2

ASSEMBLY SCHEMATICS

53

5

3

PREDRILL ASSEMBLY

8

4

1

7

6

2

PART NUMBER 10-1289 10-1417 10-504 10-703 13-039 13-044 13-047 13-079

DESCRIPTION Hubbell BK-05 Tool Balancer Sioux SSD10S25AC Screwdriver Sioux SDR10S26N3 Drill FLEX HOSE ASSEMBLY #9 Self Centering Bit #490 Bit Holder Apex 440-2 Screwdriver Bit Tool Hangar

SCREWDRIVER ASSEMBLY

ITEM NO. 1 2 3 4 5 6 7 8 2 1 1 2 1 1 1 2

QTY.