Consumables Range

look inside

consumables

table of contents premium consumables for every professional.

04 abrasives, adhesives & silicones Nikpol offers a wide range of abrasives, adhesives, and silicones designed for efficient surface preparation, strong bonding, and durable sealing in various applications.

2

10 fasteners & accessories

Our fasteners and acce including brads, staples and cover caps, provide solutions for secure and fittings in woodworking carpentry.

essories, s, screws, e reliable d precise g and

24 14 general hardware fittings Nikpol’s general hardware fittings range covers everything from connectors and locks to shelving systems and office fittings, offering practical solutions for diverse projects.

cabinet furniture locks Our cabinet furniture locks provide secure, durable locking solutions designed to protect cabinets, drawers, and furniture with ease and reliability.

3

abrasives, adhesives & silicones Abrasives, adhesives, and silicones are key materials for a variety of applications. This category includes sanding belts and disk sheets for surface preparation, hot melt glue, contact adhesives, PVA adhesives, and polyurethane adhesives for bonding, as well as silicones and sealants for sealing and weatherproofing.

These products are essential for tasks ranging from finishing and bonding to sealing in industries such as construction, automotive, woodworking, and manufacturing.

sanding

Sanding Belts Code SB10061060 SB10061080 SB100610100 SB100610120

Width 100mm 100mm 100mm 100mm

Sanding Sheets Depth 610mm 610mm 610mm 610mm

Grit 60 grit 80 grit 100 grit 120 grit

Pack QTY 10 10 10 10

Code DS120 DS150 DS180 DS240

Width 280mm 280mm 280mm 280mm

Depth 230mm 230mm 230mm 230mm

Grit 120 grit 150 grit 180 grit 240 grit

Pack QTY 50 50 100 100

Minimum order quantity = 10

Sanding Disks - 6 Holes Velstick Code SBDISK100 SBDISK180 SBDISK240

4

Diameter 150mm 150mm 150mm

Grit 100 grit 180 grit 240 grit

Sanding Disks - 8 Holes Velstick Pack QTY 100 100 100

Code SBDISK880 SBDISK8120 SBDISK8320

Diameter 125mm 125mm 125mm

Grit 80 grit 120 grit 320 grit

Pack QTY 100 100 100

silicone & sealants

Kitchen & Bathroom Silicone Neutral Cure

Construction Adhesive Code MS-3290

Colour Beige

• No sag, minimal vertical slip • Premium quality adhesive • Low odour, low VOC • Bonds to damp surfaces (not wet)

Cart. Size 345 G

Box QTY 20

• Heat resistant once cured • Paintable once cured • Easy to apply • UV resistant • AS-2329 Approved

Gap Filler Code MS-3291

Colour White

• Bonds to damp surfaces (not wet) • Low shrinkage • Can be sanded • Non volatile, low odour

Code MS-3284 MS-3285

Colour Translucent White

• Suitable for indoor and outdoors • Wet area sealant - White

Cart. Size 300 G 300 G

Box QTY 20 20

• Mould resistant sealant • Neutral cure silicone • Highly flexible

Roof & Gutter Neutral Cure Cart. Size 450 G

Box QTY 20

• Quick wash up with water • Skin time 20mins, best to paint after 1hr • Indoor and outdoor use • Flexible

Code MS-3289

Colour Grey

• Premium quality • 100% silicone • Non corrosive • Neutral cure

Cart. Size 300 G

Box QTY 20

• UV resistant • AS4020 approved • Quick exposure to light running water

precision sealing for every project Ensure durability and flexibility with high-quality sealants designed for all surfaces.

5

hot melt glue

Jowat 280.30 Hot Melt Unfilled Yellow Opaque Code HOTMELT280.3

Size 25kg

Application: Edgebanding For bonding thermoplastic edgebands (e.g. ABS, PP, PVC), edgebands made of resinated decor paper, veneer (with or without fleece backing), or solid wood edges. The properties of the bonded parts and, where necessary, the reverse primer coating of the edgebanding materials have to undergo application-related testing prior to use.

Directions: Typical Key Data: Processing temperature [°C]: 180 - 200 Feed speed [m/min]: 10 - 40

Jowat 280.58 Hot Melt Colorless Code HOTMELT28058

Size 25kg

Long open time and high hot tack.

The adhesive granulate can be processed using automatic feed systems. In that case, the ambient temperature should not exceed 30 °C. Different types of hot melt adhesives may be incompatible with each other depending on the formulation. Therefore, we recommend to carefully clean the application equipment when changing the product. Further information is available upon request.

The processing characteristics may vary depending on the application technology used as well as at differing feed speeds, which can affect the bonding process.

Customer trials are required.

Application: Edgebanding For bonding thermoplastic edgebands (e.g. ABS, PP, PVC), or edgebands made of resinated decor paper.

The properties of the bonded parts and, where necessary, the reverse primer coating of the edgebanding materials have to undergo application-related testing prior to use.

Directions: Typical Key Data: Processing temperature [°C]: 180 - 200 Feed speed [m/min]: 10 - 40

Jowat 284.70 Hot Melt Beige Code HOTMELT28470

Size 25kg

Long open time and high hot tack.

The adhesive granulate can be processed using automatic feed systems. In that case, the ambient temperature should not exceed 30 °C. Different types of hot melt adhesives may be incompatible with each other depending on the formulation. Therefore, we recommend to carefully clean the application equipment when changing the product.

Further information is available upon request. The processing characteristics may vary depending on the application technology used as well as at differing feed speeds, which can affect the bonding process. Customer trials are required.

Application: Edgebanding For bonding, polyester, resinated paper and veneer. The special properties of the edgebands and the reverse primer application have to be tested before use (especially if thermoplastic edgebands are to be bonded). Can be used for straight edgebanding.

Directions: Typical Key Data: Processing temperature [°C]: 190 - 210 Feed speed [m/min]: 20 - 60

6

The parts to be bonded must be dry and free of grease and dust, they also have to match perfectly. Wood moisture is recommended to be at 8-10%. Minimum temperature of the substrates and ambient air should not be below 18 °C. Avoid draught.

The properties of the materials to be bonded as well as the processing conditions will influence processes of joining and bonding. Customer trials are required.

Jowat 288.60 Hot Melt Semi-filled Beige Code HOTMELT28860

Size 25kg

Application: Edgebanding For bonding polyester, resinated paper, solid wood and veneer. The special properties of the edgebands and the reverse primer application have to be tested before use (especially if thermoplastic edgebands are to be bonded). Can be used for the applications straight edges, precoating and softforming.

Directions: Typical Key Data: Processing temperature [°C]: 180 - 200 Feed speed [m/min]: 12 - 60

Jowat 286.60 Hot Melt Filled Cartridge Beige 63mm ø 80 mm length Code HOTMELTCART

Size 15.5kg

Cartr.

48

Typical Key Data: Processing temperature [°C]: 180 - 200 Feed speed [m/min]: not applicable

Jowat 286.30 Hot Melt Unfilled Cartridge Beige 63mm ø 80 mm length Code HOTMELTCARTF

Size 12.2kg

Cartr.

48

Typical Key Data: Processing temperature [°C]: 180 - 200 Feed speed [m/min]: not applicable

Rakoll RK4/570 Hot Melt Code HOTMELTK4570 HOTMELTK4570W

Size 15kg 15kg

Finish Natural White

The materials to be used must be dry and free of grease and dust, they also have to match perfectly. Wood moisture is recommended to be at 8-10%. Minimum temperature of the substrates and ambient air should not be below 18 °C. Avoid draught. The properties of the materials will influence bonding. Customer trials are required.

Application: For bonding polyester, resinated paper, solid wood and veneer. The special properties of the edgebands and the reverse primer application have to be tested before use (especially if thermoplastic edgebands are to be bonded).

Characteristics / Directions: The substrate properties and the processing conditions will influence the processes of joining and bonding. Customer trials before use are therefore recommended. The materials to be used must be free of grease and dust and be dry, they also have to match perfectly. Wood moisture content should be at 8 - 10 %. Minimum temperature of substrates and ambient air should not be below 18 °C. Avoid draught.

Application: For bonding thermoplastic edgebands (like e.g. ABS, PP, PVC, PMMA), edgebands made of resinated paper, veneer (with or without fleece backing) and solid wood. The compound properties and the respective reverse primer coating of the edgeband materials have to be tested for application suitability in all cases before use.

Characteristics / Directions: High hot tack, good adhesion and good heat resistance. Good resistance to oxidation and colour stability in the melt. Very good mechanical processing characteristics with accurate string-free hot melt application.

Characteristics: Rakoll hot melt adhesives K4/570 is an EVA based synthetic adhesive with good working properties that can be used on edge banders. The adhesive melts and flows well. It is clean in use and non-stringing. Hot melt adhesive k4/570 exhibits good bonding properties in connection with decorative laminate edge strips. Customer trials are required.

Typical Key Data: Room and material temperature [°C]: 18-20 Wood moisture: 8 - 10% Operating temperature at the applicator: 190 - 210°C Fast speed: at least 20m/min

7

PVA & polyurethane adhesive

AV XL Plus Laminate Contact Adhesive Heat Resistant | Roller/Brush Grade Code AVXLPLUS20L AVXLPLUS5L

Volume 20L 5L

Applications include: • Edge gluing timber sections • Finger jointing • Panel to frame gluing

Type AVXLPLUS AVXLPLUS

• Solid timber veneers or plastic laminates to core substrates • RF curing application

AV XL Plus is a medium to fast setting medium solids single pack cross linking PVA emulsion adhesive which develops excellent bond strength, high heat resistance and humidity resistance, without catalyst addition, when dried at normal or elevated temperatures. It produces a clear non staining glue line.

AV XL Plus is an excellent adhesive for cabinet and furniture assembly where high bond strengths, good water/humidity resistance and relatively short clamp times are required.

Code AV515300ML

Volume 300ML

Type AV515

AV515 is a single component, solvent-free, thixotropic, quick setting, moisture cured polyurethane adhesive. Fully cured AV515 has an extremely strong bond with excellent resistance to water, weathering, ageing conditions. Certified to EN204 D4. AV515 is suitable for bonding porous to porous and porous to non porous substrates such as wood, plasterboard, fibrous cement, metal, EPS foam, concrete, brick, various plastics (testing is recommended) and many other common substrates providing one or two of the surfaces contain moisture. The product will not cure if there is no moisture available from the substrate. For instance if glass to glass or metal to metal is not possible.

AV56 Laminated Board Adhesive

AV180 High Strength Sandable Adhesive

Code AV56CLEAR20L AV56CLEAR5L

Code AV18020L AV1805L

Volume 20L 5L

Type AV56 AV56

AV56 Clear is an emulsion adhesive for the bonding of synthetic laminated board to timber, particle board, Craftwood and other semi-porous surfaces. It is an excellent adhesive for a variety of laminates including DAP, Melamine and vinyl coated board. AV56 Clear is an unfilled version for applications requiring a clear glue line

Hybond PVA General Purpose Code HYBONDGP20L

Volume 20L

Type HYBOND

A high viscosity general purpose cabinet grade PVA suit able for use with most softwood, particle board and other composite boards.

8

Polyurethane Adhesive

Volume 20L 5L

Type AV180 AV180

A unique one pack water based adhesive which has been designed to complement the high quality properties of MDF Board. AV180 has fast ‘wet tack’, is quick drying and has excellent machining and sanding properties. The bonds formed are very strong and heat resistant and the glue line will accept the stains and lacquers recommended for MDF Board.

contact adhesives & solvent

Anchor-Weld 2700 & 2701 Super Premium High Heat Resistant Spray Grade Code SPRAYCLEAR20L SPRAYRED20L

Volume 20L 20L

Type 2701 2700

Anchor-Weld 2700 Super and 2701 Super are premium quality, high solids, sprayable contact adhesives, featuring high early green strength coupled with an excellent working tack life. Anchor-Weld 2700 Super and 2701 Super are especially formulated to have high heat resistance, uninterrupted spraying and the ability to be used at temperatures from 15-30ºC. (NB: outside this temperature range, open and dry times may be affected.)

Anchor-Weld 901 Cleaner/Thinner Code SOLVENT20L

Volume 20L

Type 901

Anchor-Weld 901 Cleaner/Thinner is a specifically formulated blend that is ideally for cleaning off dried water based and solvent based adhesives, such as spillage and adhesive oversprays.

It is commonly used for cleaning metal tools and cleaning/soaking metal spray gun parts and scrapers. Anchor-Weld 901 Cleaner/ Thinner can also be used as a thinner for Anchor-Weld brush, roller, and scraper grade contact adhesives. Anchor-Weld 901 Cleaner/ Thinner is also suitable for thinning spray grade contacts but it is generally not required.

ABS + PVC Cleaner 802 Code ABSCLEAN20LT

Volume 20L

Type 802

802 cleaner won’t damage sensitive plastic surfaces, dries quickly, and has a low odour. It also improves the appearance of finished items. Ideal for cleaning moulded plastic and removing adhesive residue, this cleaner ensures smooth, clean results.

stronger bonds, flawless finishes Premium adhesives designed for precision, durability, and lasting strength.

9

fasteners & accessories Our Fasteners & Accessories range is designed to meet the demands of professionals, offering reliable, highperformance solutions for a variety of applications. Our Brads series ––are precision-engineered straight nails, perfect for finishing applications in woodworking and carpentry, ensuring a clean and secure fit. Along with staples, screws, and cover caps, our fasteners provide the durability and quality needed for both delicate and heavy-duty projects.

staples

8000 Series

6000 Series

Crown width: 12.9mm Wire diameter: 21 Gauge / 0.8mm

Crown width: 5.5mm Wire diameter: 18 Gauge / 1.20mm Code ASM60220 ASM60250 ASM60280 ASM60320 ASM60380

Size 22 mm 25 mm 28 mm 32 mm 38 mm

Box QTY 5000 5000 5000 5000 5000

Nylon Plug - Star Type Code WPLUG38Q

10

Size 6.5 x 38 mm

Code ASF8008 ASF80100 ASF80120 ASF80140 ASF80160

Size 8 mm 10 mm 12 mm 14 mm 16 mm

Box QTY 10000 10000 10000 10000 10000

Plaster Board Anchors Box QTY 25

Code WMATESQ

Material Zinc

Box QTY 100

brads series

Brads - C Series

Brads - C1 Series

Diameter: 16 Gauge / 1.6mm

Diameter: 18 Gauge / 1.25mm

Code ABC16190 ABC16250 ABC16300 ABC16320 ABC16350 ABC16380 ABC16400 ABC16450 ABC16500

Length 19mm 25mm 30mm 32mm 35mm 38mm 40mm 45mm 50mm

Type C19 C25 C30 C32 C35 C38 C40 C45 C50

Box QTY 5000 5000 5000 5000 5000 5000 5000 5000 5000

Type DA13 DA15 DA17

Box QTY 3000 3000 3000

Code ABF18150 ABF18190 ABF18250 ABF18300 ABF18350 ABF18380 ABF18400 ABF18450 ABF18500

Length 15mm 19mm 25mm 30mm 35mm 38mm 40mm 45mm 50mm

Type C115 C119 C125 C130 C135 C138 C140 C145 C150

Box QTY 5000 5000 5000 5000 5000 5000 5000 5000 5000

Colour White

Bag QTY 1000

Brads - DA Series Diameter: 15 Gauge / 1.75mm Code ABD13250 ABD15320 ABD17380

Length 25mm 32mm 38mm

cover caps

Star Screw Caps Code STARCAPWHT

Diameter 12.5 mm

Hole Head Screw Caps Colour White

Bag QTY 1000

To suit 8 gauge Phillips or Pozidrive countersunk screws.

Code STEMCAPWHT

Diameter 12.5 mm

To suit 4.5 gauge Chipboard screws with hole (Phillips head) and 5.0 gauge confirmat screws (Pozi).

Adhesive Caps Code STICKONCAPSBL14 STICKONCAPSW16

Size 14 mm 16 mm

Finish Black White

QTY 108/CARD 1000/BAG

11

screws

Countersunk Chipboard Phillips Screw - 4 Nibs Code CS25S CS28S CS32S CS35S CS38S CS41S CS45S CS50S CS57S CS65S CS75S

Metric Size 4.2 x 25 mm 4.2 x 28 mm 4.2 x 32 mm 4.2 x 35 mm 4.2 x 38 mm 4.2 x 41 mm 4.2 x 45 mm 4.2 x 50 mm 4.2 x 57 mm 4.2 x 65 mm 4.8 x 75 mm

Particle Board Long Thread Phillips Scews

Imperial Size 8x1 8 x 11/8 8 x 11/4 8 x 13/8 8 x 11/2 8 x 15/8 8 x 13/4 8x2 8 x 21/4 8 x 21/2 10 x 3

Box QTY 8 12 8 8 8 6 6 4 4 4 3

Hi-Lo Assembly Phillips Screws Code CSHL45S

Metric Size 3.9 x 45 mm

Imperial Size 7 x 1 3/4

12

Metric Size 4.2 x 25 mm 4.2 x 28 mm 4.2 x 32 mm 4.2 x 35 mm 4.2 x 38 mm 4.2 x 41 mm 4.2 x 45 mm 4.2 x 50 mm 4.2 x 57 mm 4.2 x 65 mm 4.8 x 75 mm

Metric Size 2.7 x 16 mm 3.1 x 16 mm 3.5 x 16 mm 3.5 x 16 mm 3.5 x 19 mm 3.5 x 25 mm 3.5 x 32 mm 3.5 x 38 mm 4.2 x 16 mm 4.2 x 19 mm 4.2 x 25 mm 4.2 x 28 mm 4.2 x 32 mm 4.2 x 38 mm 4.2 x 45 mm 4.2 x 50 mm 4.2 x 57 mm 4.2 x 65 mm

Imperial Size 4 x 5/8 5 x 5/8 6 x 5/8 6 x 5/8 6 x 3/4 6x1 6 x 1 1/4 6 x 1 1/2 8 x 5/8 8 x 3/4 8x1 8 x 1 1/8 8 x 1 1/4 8 x 1 1/2 8 x 1 3/4 8x2 8 x 2 1/4 8 x 2 1/2

Box QTY 20 24 24 24 20 22 10 8 24 21 16 12 12 10 4 6 4 4

Ruspert Silver Phillips Screw Box QTY 6

Code PB658RUSPERT

Metric Size 3.5 x 16 mm

Imperial Size 6 x 5/8

Box QTY 24

Countersunk Chipboard Phillips Screw With Hole - 4 Nibs

Ruspert Screws Phillips Type 17 Code CS25RUSPERT CS28RUSPERT CS32RUSPERT CS35RUSPERT CS38RUSPERT CS41RUSPERT CS45RUSPERT CS50RUSPERT CS57RUSPERT CS65RUSPERT CS75RUSPERT

Code PB458 PB558 PB658 PB658MB PB634 PB61 PB6114 PB6112 PB858 PB834 PB81 PB8118 PB8114 PB8112 PB8134 PB82 PB8214 PB8212

Imperial Size 8x1 8 x 11/8 8 x 11/4 8 x 13/8 8 x 11/2 8 x 15/8 8 x 13/4 8x2 8 x 21/4 8 x 21/2 10 x 3

Box QTY 8 12 8 8 8 6 6 4 4 4 3

Code CSH28 CSH30 CSH32 CSH35 CSH41 CSH45 CSH50 CSH57 CSH65 CSH75

Metric Size 4.5 x 28 mm 4.5 x 30 mm 4.5 x 32 mm 4.5 x 35 mm 4.5 x 41 mm 4.5 x 45 mm 4.5 x 50 mm 4.5 x 57 mm 4.5 x 65 mm 4.8 x 75 mm

Imperial Size 9 x 11/8 9 x 11/5 9 x 11/4 9 x 11/4 9 x 11/2 9 x 1 3/4 9x2 9 x 21/4 9 x 21/2 10 x 3

Box QTY 6 12 8 9 6 7 6 4 4 3

Raised Domehead Phillips Screws - Nickel Plated

Euro Pozi Screw Countersink Code EURO10-5 EURO11-7

Metric Size 6.1 x 10.5 mm 6.3 x 11 mm

Imperial Size 14 x 13/32 14 x 7/16

Ideal for concealed hinges and plates

Box QTY 16 10

Metric Size 6.3 x 10.5 mm 6.3 x 11 mm 6.3 x 50 mm

Imperial Size 14 x 13/32 14 x 7/16 12 x 2

Box QTY 12 12 2

Metric Size 5.0 x 50 mm 6.3 x 50 mm

Imperial Size 7 x 5/8

Box QTY 20

Code STPH658 STPH812 STPH858 STPH1058

Metric Size 3.5 x 16 mm 4.2 x 12 mm 4.2 x 16 mm 4.8 x 16 mm

Imperial Size 6 x 5/8 8 x 1/2 8 x 5/8 10 x 5/8

Box QTY 21 22 15 12

Imperial Size 8 x 3/4 8 x 3/4 8x1 8 x 11/4 8 x 11/4 8 x 11/2 8 x 13/4

Box QTY 8 8 10 8 8 8 6

Truss Head Phillips Screws For Handles

Pozi Drive Screw Code CONFIRMAT550 EUROPOZZI650

Metric Size 3.9 x 16 mm

Pan Head Phillips Self Tapping Screw

Ruspert Euro Pozi Screw Code EURO10-5RUSPERT EURO11-7RUSPERT EUROPOZZI650

Code PBRSD758

Imperial Size 8x2 12 x 2

Box QTY 6 2

Code TRUSSM420 TRUSSM422 TRUSSM425 TRUSSM432 TRUSSM435 TRUSSM438 TRUSSM445

Metric Size 4 x 20 mm 4 x 22 mm 4 x 25 mm 4 x 32 mm 4 x 35 mm 4 x 38 mm 4 x 45 mm

White Wafer Head Phillips Screw Code WH28W

Metric Size 4.5 x 28 mm

Imperial Size 8 x 11/8

Box QTY 12

strong threads for stronger builds High-performance screws designed for wood and construction projects.

13

general hardware fittings Nikpol’s General Hardware Fittings range offers an extensive selection of high-quality products designed to meet a variety of needs. From versatile connectors, locks, and catches to essential tools, accessories, and masking tape, we provide practical solutions for both professional and DIY applications. Our range also includes general legs, shelf supports, retail & office fittings, cupboard vents, and shelving systems—both slot stripping and brackets. Additionally, discover liquid laminate for smooth finishes and door buffers for added protection. Whatever your project, Nikpol delivers the durability, functionality, and precision you need for a flawless result.

general legs

Table Legs

Plastic-Adjustable Cabinet Legs Code LEGMT160 LEGMT160D LEGMT160A LEGMT160B

Description 80-160mm Leg + Base Black 4 Dowels 80-160mm Leg + Base Black Screw On 100-160mm Leg + Base Black Screw On 100-160mm Leg + Base Black 4 Dowels

Box QTY 100 100 100 100

Heavy Duty Stainless Steel Leg Code ADJLEGSS

14

Description Adjustable 140-180 mm

Code TLEG710BL TLEG710PC TLEG710BN TLEG870BK TLEG870PC TLEG870BN

Metric Size Black Adjustable 700-735mm Polished Chrome Adjustable 700-735mm Brushed Nickel Adjustable 700-735mm Black Adjustable 870 – 905mm Polished Chrome Adjustable 870 – 905mm Brushed Nickel, Adjustable 870 – 905mm

Box QTY 1 set of 4 1 set of 4 1 set of 4 1 set of 4 1 set of 4 1 set of 4

Gas Lift Box QTY 10

Code CARW200260 CARW200280 FLATLIFT143ZP

Description Gas Lift 60 Newtons Gas Lift 80 Newtons 12kg Load Capacity

Box QTY 25 25 100

general connectors

Internal Corner Bracket For Shelving

Angle Bracket Code ANGLEBRACKET ANGLEBRACKET40 ANGLEBRACKET50

Size 22 x 22 mm 40 x 40 mm 50 x 50 mm

Box QTY 2500 1000 1000

Size 16 mm

Code SHELFHSW3011

Box QTY 200

Quick Clip (White) Code QCLIPW

Description Nail On For Attaching B’tops & Panels.

Box QTY 100

Bench Connectors Code BENCHCONNECT12 BENCHCONNECT7

Size 65 X 12 mm 50 X 7 mm

Box QTY 100 600

Biscuit Joiners Code BJ20

Knock Down Fitting (White) Code KNOCKDOWNW

Description Knock Down Fitting TZ20

Size 20mm

Box QTY 1000

Table Clip Box QTY 1000

Code TABLECLIP8

Description Table Top⁄Under Bench Connector

Box QTY 100

every detail, perfected High-quality hardware fittings designed for precision, durability, and seamless functionality.

15

locks & catches

Gripper Catch

Magnetic Catch Code MCATCHW6

Description 6kg White

Box QTY 100

Corner Catch & Door Protectors Code CORNCATCHTM CORNCATCHSM DOORPRO

Description Gripper Catch White

Box QTY 100

Description Top Mount Side Mount

Box QTY 30 25

Description Barrel Bolt 50 mm Barrel Bolt 75 mm Barrel Bolt Offset 75 mm

Box QTY 10 10 25

Daisy Catch

Description Top Mount White Side Mount White Pull Out Shelf Door Protector

Box QTY 15 25 25

Door Catch & Stop Code DOORCATCH CARCUSHSTOPW CARCUSHSTOPB

Code GCATCH

Description White 25mm White Cushion Stop Black Cushion Stop

Code CATCHDSY-2 CATCHDSY-3

Barrel Bolts Box QTY 100 20 20

Code BARRELBOLT50CP BARRELBOLT75CP BARRELBOLT75N

hinges

Piano Hinge Code PHNICKEL2M PHNICKEL25M PHSTAINLESS2M PHSTAINLESS25M

Hirline Hinge Description 2M Strip Nickel 25M Coil Nickel 2M Strip Stainless Steel 25M Coil Stainless Steel

Code HIRLINEH2ZP

Description Hirline Hinge 50 mm

Box QTY 100

Round Corner Hinge Code HJBUTT50AC

16

Description Steel Hinge 50 x 32 mm

UOM EA

push latches

DTC Drill Push Latch Code DTCMS-MSB01F00

DTC Inline Push Latch

Description Pin, drill 10mm hole - White

Box QTY 200

Code DTCMS-MSB01F01

Description Pin And Inline Latch - White

Box QTY 200

DTC Cross Push Latch Code DTCMS-MSB01F02

Description Pin, System 32 Cross Latch

Box QTY 200

general shelf supports

Shelf Support Metal/Plastic Code SSUPCL SSUPWH

Shelf Support - Metal

Description Metal Pin Clear 5 mm Metal Pin White 5 mm

Box QTY 1000 1000

Description 8 mm stud 8 mm stud

Finish Solid Brass Solid Brass Bush

Description 5 mm stud

Finish Nickel Plated

Box QTY 1000

Shelf Retaining Clip

Shelf Support - Brass Code SSUPBRASS SSUPPBUSH

Code SSUPSHELF

Box QTY 5000 1000

Code SHRETCLIP

Finish White

Box QTY 1000

sold as 100 per bag

17

retail & office fittings

Deluxe Cash Tray

Cable Entry Covers Code CABCOVBEIGE CABCOVBLACK CABCOV60MATTBLK* CABCOVWHITE CABCOVGREY CABCOV80MMBEIGE CABCOV80MBLACK CABCOV80MWHITE

Face Size 70 mm 70 mm 70 mm 70 mm 70 mm 90 mm 90 mm 90 mm

Cut out Size 60 mm 60 mm 60 mm 60 mm 60 mm 80 mm 80 mm 80 mm

Finish Beige Black Matt Black White Grey Beige Black White

Box QTY 500 500 20 500 500 300 300 300

* made of steel

Code CASHTRAYDLX

Size 375 W x 280 D x 50 H mm

Box QTY 1

Rectangular Cable Cover Box QTY Code Face Size Cut Out Size Finish CABCOVREC80ALUM 275 × 80mm 265 × 70mm Aluminium 50 CABCOVREC80MB 275 × 80mm 265 × 70mm Matt Black 50

cupboard vents

Aluminium Vent

White Plastic Vent

Code Face Size Cut Out Size Finish VENT300ALUM 300 x 80 mm 270 x 65 mm Aluminium VENT300MB 300 x 80 mm 270 x 65 mm Matt Black

Box QTY 200 200

Code VENT225W VENT230W

Face Size 230 x 152 mm 260 x 165 mm

Cut Out Size N/A 191 x 115 mm

Box QTY 167 50

Finish White White Chrome White White Chrome White Chrome White Chrome White Chrome

Box QTY 10 10 10 10 10 10 10 10 10 10 10 10

shelving systems - slot stripping

Single Slot Stripping

Double Slot Stripping Code SLOTSTRIPD1800C SLOTSTRIPD1800W SLOTSTRIPD2400WH SLOTSTRIPD2400C

18

Size 1800 mm 1800 mm 2400 mm 2400 mm

Finish Chrome White White Chrome

Box QTY 10 10 10 10

Code SLOTSTRIP600W SLOTSTRIP900W SLOTSTRIP900C SLOTSTRIP1200W SLOTSTRIP1500W SLOTSTRIP1500C SLOTSTRIP1800W SLOTSTRIP1800C SLOTSTRIP2100W SLOTSTRIP2100C SLOTSTRIP2400W SLOTSTRIP2400C

Size 600 mm 900 mm 900 mm 1200 mm 1500 mm 1500 mm 1800 mm 1800 mm 2100 mm 2100 mm 2400 mm 2400 mm

shelving systems - brackets

Brackets Accessories

Brackets Code SLOTBRKT150W SLOTBRKT150C SLOTBRKT200W SLOTBRKT200C SLOTBRKT250W SLOTBRKT250C SLOTBRKT300W SLOTBRKT300C SLOTBRKT350W SLOTBRKT350C SLOTBRKT400W SLOTBRKT400C SLOTBRKT450W SLOTBRKT450C SLOTBRKT500W SLOTBRKT500C

Size 150 mm 150 mm 200 mm 200 mm 250 mm 250 mm 300 mm 300 mm 350 mm 350 mm 400 mm 400 mm 450 mm 450 mm 500 mm 500 mm

Finish White Chrome White Chrome White Chrome White Chrome White Chrome White Chrome White Chrome White Chrome

Box QTY 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

Code SLOTEND SLOTCENTRE SLOTGROM

Description Plastic End Clip Plastic Centre Clip Plastic Grommet

Box QTY 100 35 200

precision in every component Reliable fittings for residential, commercial, and DIY applications.

19

Photo for illustration only.

Photo for illustration only.

20

shelving systems - floating shelf accessories

1. Fixed to plaster material*

2. Fixed to concrete or brick*

3. Fixed to stud wall*

Wall mounting of the floating shelf requires screws (not included). Always choose screws which are suitable for the relevant application. The figure shows three common types of walls, with a specification of fittings and maximum load of the floating shelf. * Calculation based on best bracing, best screw and best dowel material, based on maximum weight being at the centre of the shelf.

Brackets Code EEL50BRACKET950 EEL50BRACKET1250

Description Eurolight Shelf Strip 950 mm and 2 Brackets Eurolight Shelf Strip 1250 mm and 3 Brackets

Type Eurolight Eurolight

UOM EA EA

* Eurolight Shelves can be manufactured to order in a full range of colors. Please note: various shelf decor colours are available to be manufactured from Egger 50 mm Eurolight stock colours. P.O.A.

Floating Shelf Assembly Instructions 1

2

4

5

3

The assembly should be carried out by a qualified person due to the fact that wrong assembly can lead to that the furniture / object topples or falls resulting in personal injury or damage. NOTE: Screws to fix the floating shelf to the wall are not included. Always choose screws and fittings that are specially suited to the material in your wall and have sufficient holding power. If you are uncertain, contact your retailer.

21

masking tape, door buffers & liquid laminate

Double Sided Adhesive Tape Code MITREPROTAPE

Masking Tape Size 48 mm x 33 m

Box QTY 24

Cushion Stop Code BUFWHITE

Colour White

Colour White

Size 12 mm x 2 mm Dia.

Sheet QTY 125

Box QTY 36 18

Size Backing 297 x 210 mm Self-Adhesive

Code BUFCLEAR15 BUFCLEAR2 BUFCLEAR3

Colour Clear Clear Clear

Size 1.5 mm x 7 mm Dia. 2 mm x 10 mm Dia. 3 mm x 10 mm Dia.

Sheet QTY 100 100 100

Liquid Laminate Pack QTY 5

Sheet plastic for custom coverplates such as range hood flue and waste traps. Ideal for general patch work. All cover plates are 1 mm thick high impact polystyrene.

Code LLBLACK LLWHITE

taping made easy Effortless application, strong adhesion—perfect for any job.

22

Size 24 mm x 50 m 48 mm x 50 m

Door Buffers

Cover Blank Sheet Code FBLANKSHEET

Code MASKTAPE24 MASKTAPE48

Description Black Liquid Laminate White Liquid Laminate

Volume 15ml 15ml

Box QTY 6 6

general fittings

Plumbing Waste Access Code WASTECP40 WASTECP50 WASTECP65 CABISEAL

Size C/Plate 40 C/Plate 50 C/Plate 65 150MM X 95MM

Pivoting Pocket Door Box QTY 10 10 10 EA

Size 42 x 19 mm x 3.6 m 42 x 19 mm x 3.6 m

Size 506 mm

Box QTY 4

Furniture Wedges Brown

White Vinyl Wrap Code WHITEWRAP BLACKWRAP

Code HPOCKET506

Pack QTY 15 15

Code FWEDGES

Size 99 x 20 mm

Box QTY 250

Nail Guide Beige Code NAILGUIDE16

Size 16 mm

Box QTY 1000

23

tool & accessories

Magicut File Code FILEMAGI

Vallorbe Handy File Size 250 mm

Box QTY 5

Size 300 mm

Box QTY 6

Metric Size 2.38 mm 2.78 mm 3.17 mm 4.76 mm 5 mm

Imperial Size 3/32 7/64 1/8 3/16 -

Pack QTY 10 10 10 10 10

Hinge Machine Drill Bits Code DB5MMLH DB5MMRH DB8MMLH DB10MMLH DB10MMRH DB25MMRH DB35MMRH DB40MMRH

24

Box QTY 6

Code SCREWTIP2PT25 SCREWTIP2PT50

Size 25 mm 50 mm

Box QTY 10 10

Metric Size B17 Bayonet B19 Bayonet B10 Bayonet B11 Bayonet

Pack QTY 5 5 5 5

Jigsaw Blades

HSS Drill Code TD101060 TD101079 TD101087 TD101125 TD105678

Size 203 mm

Phillips Screwdriver Tips

Millsaw Bastard File Code FILEMILL12

Code THANDYFILE

Size 5 mm x 57 mm 5 mm x 57 mm 8 mm x 57 mm 10 mm x 57 mm 10 mm x 57 mm 25 mm x 57 mm 35 mm x 57 mm 40 mm x 57 mm

Orientation LH RH LH LH RH RH RH RH

Code TJB8002-5 TJB8018-5 TJBM10B TJBM11

work smarter, not harder Gear up with tools that get the job done right.

25

cabinet furniture locks Nikpol’s Cabinet Furniture Locks range offers robust and secure solutions for your cabinetry needs. Featuring a comprehensive lock program, our collection includes a variety of locks designed for different applications, providing both security and ease of use. Whether you're outfitting cabinets, drawers, or furniture, our highquality locks ensure reliable protection while maintaining a sleek, professional appearance. Trust Nikpol for locks that combine functionality, durability, and a perfect fit for every project.

lock program details

Nikpol Master Key Suits All Locks Code LOCMASTER

Cylinder Core with Keys

Colour Chrome

Box QTY 50

Nikpol Remove/ Install Key Suits All Locks Code LOCREMOVAL

Colour Chrome

Box QTY 50

Square Back Projection Lock Code LOCSQLOCK

Size 18 mm

Key Key Differ Lock Barrel Key Alike Lock Barrel Key Number 30 Key Number 36 Key Number 37 Key Number 40 Key Number 50

Box QTY 50 50 50 50 50 50 50

* Note: Individual keyed stock variations, 10 per bag, 50 per box #Note: Individual keyed stock variations Key 001 through to Key 020

Side Mounting Multi Lock Specification A-601S-22 ø 18 mm

Box QTY 25

Code LOCSIDE600

Size 18 mm

Box QTY 20

Cylinder core and 2 keys sold separately. Please confirm keying requirements at time of order i.e. keyed alike, keyed differ. Please specify key number if applicable.

Cylinder core and 2 keys sold separately. Please confirm keying requirements at time of order i.e. keyed alike, keyed differ.

Please specify key number if applicable.

• Drawer Lock • Dim. D=25 mm For Screw Mounting • Click Action Mechanism • Key Removable In Locked & Unlocked Positions • Optimal soft-closing operation • Zinc Alloy Die Cast

LOCSIDE 600 With 600 mm Bar 3 Drawers • Side Central Lock • Cabinet Side Installation • Key Removable In Locked & Unlocked Positions • With Aluminum Bar • Zinc Alloy Die Cast

Includes: • 1 Lock housing • 1 Bezel

Includes: • 1 Lock housing • 1 Bezel • 3 Locking Bolts • 3 Screws • 2 Bar Guides

Accessory Option: • STRIKERPLATE40

26

Code LOCBARRELKD* LOCBARREL# LOCBARREL030 LOCBARREL036 LOCBARREL037 LOCBARREL040 LOCBARREL050

Front Mounting Multi Lock

Side Mounting Multi Lock Size 600 mm 25 mm

Code LOCFRONT600 LOCSINGLE

Box QTY 100 25

Cylinder core and 2 keys sold separately. Please confirm keying requirements at time of order i.e. keyed alike, keyed differ.

Please specify key number if applicable.

• LOCFRONT600 with 600 mm bar to suit up to 3 drawers • Front Central Lock & Cabinet Front Installation • Available In Two Diameters: 16.5 mm & 18 mm • Key Removable In Locked & Unlocked Positions • With Aluminum Bar • 180º Rotary Lifting Pin Movement • Zinc Alloy Die Cast Includes: • 3 Locking Bolts • 1 Bezel • 3 Screws • 2 Bar Guides

Cam Lock Code LOCCAM25 LOCCAM30

Box QTY 25

Cylinder core and 2 keys sold seperately. Please confirm keying requirements at time of order i.e. keyed alike, keyed differ.

Please specify key number if applicable.

• Push Lock • Push-In Locking, No Key Required When Locking • Key Removable In Locked & Unlocked Positions • M5 Internal Thread Locking Pin • Zinc Alloy Die Cast Includes: • 1 Lock housing • 1 Bezel

Slam Lock

Suit 7-16mm Wood Thickness 16-21mm Wood Thickness

Size 25 mm 30 mm

Box QTY 25 50

Cylinder core and 2 keys sold separately. Please confirm keying requirements at time of order i.e. keyed alike, keyed differ.

Please specify key number if applicable.

• Cam Lock • 90º Rotary Cam Movement, Convertible • Key Removable In Locked & Unlocked Positions • Zinc Alloy Die Cast Includes: • 1 Lock Housing • 1 Notched Cam • 1 Mounting Screw • 1 Washer • 1 Steel Nut

Size 25 mm

Code LOCSLAM

Box QTY 20

Cylinder core and 2 keys sold separately. Please confirm keying requirements at time of order i.e. keyed alike, keyed differ.

Please specify key number if applicable.

• Locslam/Auto Lock • Automatically Locks Drawer When Closed • Anti-Pick Bracket Ensures Maximum Security • Dim. D = 25 mm For Screw Mounting • Click Action Mechanism • Key Removable In Locked & Unlocked Positions • Zinc Alloy Die Cast Includes: • 1 Lock Housing • 1 Bezel • 1 Anti-Pick Bracket

Striker Plate For Metal Sided Drawers

Striker Plates Code STRIKERPLATE40

Size 18 mm

Code LOCPUSH

Size 40 mm

Finish Nickel Plated

Box QTY 1500

Code STRIKERPLATEMD

Size 30 mm

Finish Nickel Plated

Box QTY 500

27

consumables Published March, 2026

Phone: 1300 645 765 Website: www.nikpol.com.au Email: sales@nikpol.com.au Proudly supplying DTC Hardware and Blaupunkt Kitchen Appliances

VIC 6-12 Fairchild Street Heatherton VIC 3202

QLD 19 William Farrior Place Eagle Farm QLD 4009