CABLING GUIDE
Cabling guide – Claas harnesses for FieldView Drive compatibility Rev. 0 of 19/05/25
1. Scope of the document:
The scope of this document is to support the farmers and the field team to order the right harness to interface FieldView Drive with the Claas combine or chopper This document is based on experience from Europe, Ukraine and South Africa markets. Differences with other market can be possible. In this case please contact our technical support.
2. How to identify the machine:
The machine must be identified through the identification label, as shown below. The field named “Type” identify the series of the machine.
Cabling guide – Claas harnesses for FieldView Drive compatibility
Rev. 0 of 19/05/25
3. Guideline to choose the right harness:
Model Year
Lexion, Tucano, Trion, Evion >2015
Required options installed Notes Type
Yield sensor, moisture sensor, active Telematics account, third parties unlock, ISObridge installed
Without NAV900 GPS & CEMIS display installed C63, C64, C65, C66 CC2019K C73, C74, C75, C76 CC2056K C83, C84, C85, C86 CC1055K
With NAV900 GPS & CEMIS display installed C86 CC2291K
Yield sensor, moisture sensor, active Telematics account, third parties unlock, ISObridge installed Without CEMIS display installed 496, 497 CC2019K 498 CC2056K 499, 502 CC1055K
With NAV900 GPS & CEMIS display installed 502 CC2291K
Note: If the CEMIS display is installed, need to be updated to the last firmware version from CLAAS dealer. Also, need to enable the NMEA2000 output.
4. What to do if the machine isn’t compatible: The alternative is to install FieldView Yield Kit. Need to order:
- Nr. 1 297001 Yield Kit
- Nr. 1 273004 Receiver Kit
- Nr. 1 FVD FieldView Drive
- Nr. 1 MK Mounting Kit Obviously, the farmer needs to have an active FieldView PLUS account.
Cabling guide – Claas harnesses for FieldView Drive compatibility
Rev. 0 of 19/05/25
4