Easy Ways To Build A Patio Cover

Easy Ways To Build A Patio Cover

Incorporating a patio cover into your home decor is a beautiful addition that enhances your house’s aesthetics while regulating the heat flow passing through nearby windows. Patio covers offer a solace environment for calmly relaxing after a tiring day. Its covers protect you from natural weather elements, providing a perfect place for enjoying a barbeque or getting together with family or relatives.

A patio cover is usually made from wood and aluminum and uses canvas in small areas. It comes in varied styles and shapes, including DIY pergola, and umbrella, creating indecisiveness regarding how exactly you want your patio cover to be done.

While looking for patio cover installation in Sacramento, there’s no need to hire professionals to get your job done. Instead, with the following DIY steps, you can do it yourself.

How To Build A Patio Cover?

Here is a comprehensive guide to building a free-standing pergola-style patio cover to beautify your outdoor space.

Measure and draw the area you like to cover: Initially, measure the width, height, and length of the area you want to cover for your patio. Draw the patio cover on paper to determine the necessary materials. With a rough sketch of your patio cover, it will be easy for you to get the materials you’ll need.

Choose the covering styles: You may find multiple style options for patio covers in Folsom, including fully covered, attached to the home, or covered with asphalt shingles. Evaluate options by considering your house’s look, comfort, and budget. Moreover, patio covers are canvas materials that can roll when not used.

Order building materials: Consider buying the patio cover’s building material from the local lumberyard, as they’ll give you a better service, straighter boards, and answers to all your queries.

Many lumberyards sometimes offer free delivery for extensive materials. Above all, it will be easier for you to secure the quality of the materials while buying. Since the store is local, it would be convenient to return or replace any material.

Gather proper tools: To build a solid structure, you need the right tools. The list includes: Hammer Tape measure Drill Drill bits Circular saw

Miter saw Reciprocating saw Square, level Chalk line Shovel(s) Round point shovel Posthole diggers Sawhorses Ladder, pencil, safety glasses, gloves, tool belt, and clamps Contact local building department: This step is essential, as it will give you a confirmation to assess your construction while ensuring it’s correct. Depending on the area, the building inspector will provide helpful recommendations. If you don’t take a permit, you might experience difficulties completing your project.

Dig Footing Holes: Get the post hole diggers out and start digging after you’ve laid out the framework.

The connection method will determine the hole’s depth and size depending on the footing type you’ll use. As a standard practice, pour the concrete into a concrete form, exposing the final top above grade. A concrete footing enables you to use the bracket to connect the 6×6 corner post to the concrete foundation, following the building codes in most areas.

Secure the corner posts:

Connect your corner posts to the concrete footings using a code-approved method.

Once you have connected the rods, brace them in a level position so they can’t move.

Before attaching more framing to it, check the post for level. Also, don’t remove the bracing until the project finishes.

Build and secure the rim joist: Double the 2x material, as doubled 2×8 or 2×10 is typically used for the header or rim joist. Use an authorized post tie and galvanized nails or screws to secure the header to the front two corner posts. Repeat the same process on the back of corner posts with the rear rim joist. Now, add angled wood braces to the corner, helping to keep the patio cover leveled.

Attach the rafters: Cut the rafters to length and position them on top of the framework. Now, secure the rafters to the beams using authorized beam ties, commencing at one end and spacing them 16 inches in the middle.

Install the slats on the rafters: The last step for patio cover construction is to install the slats 90 degrees to the rafters. These slats secure the whole structure together, making it rigid. They support and secure the roofing material like steel or PVC sheets.

Source: https://newdawnawning.home.blog/2022/07/14/how-to-build-a-patio-coverstep-by-step/