SC200
DESCRIPTION
Grants SC200 is a fast setting high build modified cementitious screed for use with Grants waterproofing membranes and tile adhesives. SC200 can be used for internal/external applications but not for immersed situations like a swimming pool spas etc. It is suitable for concrete floors and fibre cement sheets prior to tiling.
features & benefits
• Internal & external applications
• Rapid Setting
• Suitable for shower bases & balconies
• Can achieve 15-200mm thickness
WARRANTY
15 year manufacturers warranty
COVERAGE
A 20kg bag of Grants SC200 will cover approximately 0.5m2 at 25mm thickness
THICKNESS
Grants SC200 can be applied at 15 to 200mm thickness
WORK TIME
Work time of 25 minutes at 23°C
DRYING TIME
Allow SC200 to set for at least 8 hours at 23°C before tiling or waterproofing over. (Do not apply in temperatures above 40°C or below 5°C)
SC200
TECHNICAL DATA
Appearance Grey Powder
Initial Set Time 2 hours at 23°C
Initial Set Time (For Waterproofing membranes) 4 hours at 23°C
Final Set Time 8 Hours at 23°C
Work Time 25 min at 23°C
Coverage 0.5m2 (25mm thickness)
Warranty 15 years manufacturer
PACKAGING
20kg bag
SUB FLOOR PREPARATION
The surface must be clean, dry, firm and free of dust oil, grease, wax and curing compounds. The substrate must be installed according to the relevant standards and manufacturer recommendations. All porous surfaces must be primed with Grants PR100 Primer, 3 parts water to 1 part primer. For non-porous surface such as existing tiles, it must be primed using Grants Primer Grip. Please contact National Tiles for further information.
MIXING
Mix 2 to 2.5 litres of water to 20kg of Grants SC200. Mix with a mixing paddle until a creamy consistency is achieved and powder is free of lumps. Allow mixture to stand for 3 minutes, remix, then use the screed. Do not over water as this will promote bleed and separation with a reduction in bond and strength.
MOVEMENT JOINTS
Movement joints must be in accordance with Australian Standard AS 3958-2023.
APPLICATION
• Do not apply Grants SC200 below 5°C and above 40°C
• Minimum thickness is 15mm for bonded screeds on concrete.
• Minimum thickness for unbonded screeds is 40mm.
• Maximum thickness applied in any one application can be up to 200mm.
SHELF LIFE
Grants SC200 has a shelf life of 12 months from date of manufacture when stored in the original unopened bag in dry conditions. High temperature and humid conditions may reduce the overall shelf life. It is recommended to store out of direct sunlight and directly off cold floors.
HEALTH & SAFETY
It is always recommended to use the correct personal protective equipment when handling and mixing screed. For information and advice please refer the most recent SDS sheet available from the National tiles website or speak with an SAS Technical Representative.
Specialty Adhesive Systems (SAS) Pty Ltd Unit A2/152 Miller Rd Chester Hill NSW 2162, Australia 1300 202 894 | sales@sas-aa.com.au
WARNING
All details contained in this technical data sheet are provided based on most recent testing criteria and are true and correct based on details provided. It is always recommended that users familiarise themselves with the product, application and suitablility.