Our Grants adhesive range is made and owned 100% in Australia. Produced in a high quality controlled manufacturing facility with high quality materials, providing exceptional value for money.
Disclaimer: This information sheet is to be used as a guide only. If you have any questions, please speak with a Trade Sales Representative for more information.
SUBSTRATE
CONCRETE / RENDERED BRICK WORK
SCREED CURED 24H
SCREED 7 DAY
CERAMIC TILE UNDERLAY
PLASTERBOARD
SCYON BOARD*
Scyon MUST be primed: Internally: Prime with PR100 Externally : Prime with SAS 2 Part Epoxy Primer.
TIMBER * (Ceramic Tile Underlay MUST be used in all timber areas)
ACOUSTIC MATS *
INTERNAL USE
EXTERNAL USE
WALL TILING
FLOOR TILING
TILING OVER WATERPROOFING WATERBASED MEMBRANES
** Acoustic Mats must be approved by National Tiles
* RB 320 and RB 520 can be used for walls but not preferred. Because of the rubber crumb in the adhesive, that may affect grouting All substrates must be primed with GRANTS PR100 or approved expoxy moisture barrier depending on substrate. ADHESIVE
COVERAGE GUIDE PER BAG
Square notch trowel
MA 250 D1TE
PRE MIXED MASTIC TILE ADHESIVE 20KG COVERAGE 15M2 PER 20KG USING A 6MM TROWEL
RB 100 C1S1
ECONOMICAL GRADE RUBBED MODIFIED FLEXIBLE WHITE CEMENT BASED TILE ADHESIVE
RB 320 C2S1TE
RUBBER MODIFIED TILE ADHESIVE 20KG COVERAGE 7 M2 PER BAG 10MM TROWEL
RB 520 C2S1TE
RUBBER MODIFIED TILE ADHESIVE 20KG COVERAGE 8- 9 M2 PER BAG 10MM TROWEL
PM
450 C2S1TE
POLYMER MODIFIED MASTIC TILE ADHESIVE 20KG COVERAGE 6-7 M2 PER BAG 10MM TROWEL
PURE WHITE COLOUR NON SLUMP IDEAL FOR LARGE FORMAT TILES INTERNAL TILING ONLY
PM
550 C2S1TE
POLYMER MODIFIED MASTIC TILE ADHESIVE 20KG COVERAGE 7 M2 PER BAG 10MM TROWEL
PM
700 C2S2TE
PREMIUM LIGHTWEIGHT HIGH COVERAGE AND PERFORMANCE ADHESIVE. POLYMER MODIFIED EXTRA COVERAGE TILE ADHESIVE 15KG COVERAGE 9 M2 PER BAG 10MM TROWEL
INTERNAL / EXTERNAL WALL / FLOOR
NON SLUMP TILING MAIN FLOORS
LARGE FORMAT TILES GREEN SAND AND CEMENT SCREEDS
NON SLUMP TILING MAIN FLOORS LARGE FORMAT TILES EXTRA COVERAGE THAN RB 320
NON SLUMP / NON SLIP IDEAL FOR LARGE FORMAT TILES AND STONE FOR TILING DRIVEWAYS MIXED WITH AD200 FOR TILING SWIMMING POOLS MIXED WITH AD200 APPROVED WATERPROOFING MEMBRAINES INTERNAL OR EXTERNAL TILING
NON SLUMP / NON SLIP NATURAL STONE / (EXCEPT MOISTURE SENSITIVE) FACADE TILING MIXED WITH AD200
ALL PURPOSE ADHESIVE TILING OVER PARTICLE BOARD FLOORING TILING IN CONCRETE POOLS AND SPAS EXTREMELY SMOOTH CONSISTENCY
FAST SETTING SAND / CEMENT SCREED 20KG DRIES IN 4 HOURS
PR100
FOR POROUS OR NON POROUS SUBSTRATES. TO BE USED BEFORE ADHESIVES AND WATERPROOFING MEMBRANES ARE APPLIED.
FS300
LIQUID ACCELERATOR TO BE USED WITH CEMENT BASED PRODUCTS
AD200
GROUT ADDITIVE AND BOOSTER FOR PM 450 , PM 550
WPM
CLASS III FIBRE REINFORCED WATER-BASED POLYURETHANE WATERPROOFING MEMBRANE
RAPID SETTING SCREED 15MM - 200MM IN THICKNESS
FAST DRYING ACRYLIC PRIMER CAN BE USED NEAT FOR TILING OVER EXISTING TILES USED NEAT OVER NON POROUS SUBSTRATES
FAST SETTING ADDITIVE TO BE USED WITH PM 450 PM 550 TO INCREASE THE DRYING TIME. CAN ALSO BE USED IN SAND / CEMENT SCREEDS IDEAL FOR USE IN COOLER TEMP
CONCENTRATED ACRYLIC LIQUID TO BE USED WITH PM 450 PM 550 FOR IMMERSED TILING APPLICATIONS AND TILING DRIVEWAYS HIGH SOLIDS ACRYLIC BASED ADDITIVE
UNDER TILE MEMBRANE FOR WET AREAS, BALCONIES THAT ARE GOING TO BE TILED GREY IN COLOUR 300% ELONGATION
