The goods

Important

1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.

2. Do not over tighten screws and bolts to avoid stripping.

3. Please use hand tools to assemble this product. Do not use power tools.

It’s time to dive into building the ottoman you’ve been anticipating. Start by turning the Frame (B) on its side and attaching the first Leg Side Panel (A) to one end.

You’ll need the 1/4 x 1 9/16 Inch

Thread Bolt (1), a 1/4 x 3/4 Inch

Flat Washer, a 1/4 x 9/16 Inch Spring Washer (2), and of course, the trusty Allen Key (4).

Repeat this on this other side of the Frame (B). Give those connections a good tightening, getting them to about 75%.

Step 2

With both Leg Side Panels (A) now attached, it’s time to take things up a notch. Give everything a final tightening, cranking it up to a solid 100%. This is where your masterpiece gets its strength!

Step 3

Last but not least, slide in the Seat Cushion (C) into the assembly you’ve worked so hard on. Now comes the best part – go ahead and take a seat. You’ve earned it! Kick back, relax, and enjoy the result of all that effort you put in.