Letâs build the
Aerie Storage Cabinet
VN-24-1021
This should be easy, just follow our instructions and you will be back to Netflix in no time.
Estimated time for assembly
What you need
âą Some of your favourite bubbly or your preferred relaxant
âą Use the packaging carton as a working surface to prevent product damage during assembly
âą Phillips head screwdriver
âą Drill (not included)
âą 1/4â Drill bit (not included)
The goods
IMPORTANT
1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
2. Do not over tighten screws and bolts to avoid stripping.
3. Please use hand tools to assemble this product. Do not use power tools.
Step 1
Your highly anticipated storage cabinet is here! Time to bring it to lifeâstart by laying out the Top Front Stretcher (D) and the Top Back Stretcher (B) on a soft surface (a towel works great!)
Attach the Magnetic Push Latch (1) using the M3x15mm Screws (7) and then finish up this step by inserting the Ă8 Ă 30mm Wooden Dowels (2) in to the holes the ends of the Stretchers.
Step 2
Your hard work will all be worth it in the end! Locate the Bottom Back Stretcher (C) and the Bottom Panel (E). Attach the two parts together using the Ă8 Ă 30mm Wooden Dowels (2), the M4 x 35mm Screws (8), and a screwdriver.
Next, attach the Magnetic Door Catch (13) to the Bottom Panel (E) using the M3 x 15mm Screws (7).
Helpful Tip! Magnetic Door Catch can be adjusted front to back to solve for
Step 3
Youâre just getting warmed up! Next, grab the Right Side Panel (A) and Left Side Panel (F). With your trusty screwdriver, secure the Cam Bolts (3) into each of the 6 corners.
3 x6 PCS 3 x6
How to use cam locks
Did you know?
Cam locks are used to join tw o panels together, usually the edge of one to the flat side of another.
First, your cam bolt (or cam pin) will need to be properly insert ed into the flat side of the board.
Import ant Note: Only tighten the cam bolt until it is secure. Do not over-tighten.
Next, you will fit the proper hole on the edge of the associated joining panel over the cam bolt.
Import ant Note: W hen installed properly, the head of the cam bolt will be visible through the larger hole on the side of the joining panel.
Next, you will notice the cam lock has a âCâ shaped back. Commonly, an arrow on the front of the cam lock points in the same direction as the open sect ion on back.
Using these as your cues, insert the cam lock into the large hole so the opening of the âCâ fits over the head of the cam bolt.
Using a screwdriver, you will turn the cam lock until it stops, usually between 130Âș or 180Âș. You will feel the panels pulling closer until they are secured.
Import ant Note: Only turn the cam lock until the panels are fully engaged & feel secure. Turning too far may lead to hardware failure.
Still having issues?
If a cam loc k seem s to be spinning in place or is not âcatchingâ or pulling the pa nels together as expected , first rem ove th e cam loc k & tr y agai n whil e mak in g sure that everyt hin g is properly positoned & oriented .
If you are still having issues get ting things worki ng as expected, first re move the cam lock then unscre w th e cam bolt slightly (les s than 1 complete turn) to see if that helps with the alignment of the cam lock & bolt .
Next, slide the Top Back Stretcher (B) and the Top Front Stretcher (D) into place. Secure all three parts with the Cam Locks (4) and your trusty screwdriverâyouâre really making this Step 4
Itâs easier than it looks! Start by laying the Right Side Panel (A) flat on your soft surface. Attach the Bottom Panel (E) using the Ă1/4â Ă 30mm Hex Button Head Bolt (5), the Spring Washer Ă1/4â x 10mm (9), the Flat Washer Ă1/4â x 13mm (10), and the Allen Key (14).
NOTovertighten hardware Tightenonlyto75% for now.
Step 5
Grab the Left Side Panel (F) and attach it to your assembly from the previous step using the Ă1/4â Ă 30mm Hex Button Head Bolt (5), the Spring Washer Ă1/4â x 10mm (9), and the Flat Washer Ă1/4â x 13mm (10). Insert the Cam Locks (4) into their corresponding holes to lock everything in place. Now weâre really getting somewhereâyou can finally see your storage cabinet taking shape!
This oneâs a breeze! Unfold the Back Panel (G) and gently slide it into the grooves of your storage cabinet.
Groove
Tip: T he back panel needs to be inserted vertical ly into the groove in the si de panel.
Letâs top this off! (Pun absolutely intended). Locate the Top Panel (H) and use Wooden Dowels (2) to connect it to the cabinet. Secure it with the Ă1/4â Ă 30mm Hex Button Head Bolt (5), the Spring Washer Ă1/4â x 10mm (9), the Flat Washer Ă1/4â x 13mm (10), and the Allen Key (14). For now, only tighten to about 30%âweâll revisit this soon! Step 7
Tip: The back panel needs to be inserted vertically into the groove in the side panel
Do NOT overtighten hardware. Tighten only to 30% for now.
Time to attach the first door! Slide the Plastic Sleeve Washers (11) over the pin hinges, then grab the Right Door (I) and carefully slide it into place on the cabinet. Youâll need to lift the Top Panel slightly to fit it in. Make sure the Magnetic Catch Plate is facing inside the cabinet. Step 8
11 x2 PCS
Plastic Sleeve Washers over the pin hinges
Magnetic Catch Plate horizontal faces inside cabinet
Slide
Step 9
Now, letâs do the same for the Left Door (K)! Repeat the previous step, sliding the door into place and ensuring the Magnetic Catch Plate is facing inside the cabinet. Youâre almost thereâjust a few more steps to go!
Step 9 cont.
Now letâs circle back and tighten those screws underneath the top of the cabinet to 100%. This will lock everything in place and give your cabinet the sturdy finish it deserves!
Grab the Ă1/4â x 55mm Hex Button Head Bolt (6), Spring Washer Ă1/4â x 10mm (9), Flat Washer Ă1/4â x 13mm (10), and the Allen Key (14). Use them to give your cabinet some extra stabilityâthis step helps keep everything solid and secure!
Now, letâs repeat the process for the screws on the back of the cabinet. Tighten them to 100% to ensure everything is locked in place.
Open up those cabinet doors and insert the Shelf Pins (12) at your preferred height. Once theyâre in place, slide the Shelf (L) right on top. Customize the height to fit your needsâyouâre almost done! Step 12
Step 13
If your cabinet feels a bit wobbly or uneven, donât worry! You can easily fix this by adjusting the feet to balance everything out. A quick tweak, and your cabinet will be perfectly level and steady.
HELPFUL TIP: Adjust feet to balance cabinet
Is
your
c abinet
door looking crooked or unevenly spaced?
If youâre still having trouble lining ever y thing up, your next step should be to try to adjust the feet slightly to square up the cabinet and doors. Follow the instructions below:
If the right door appears to be hanging low, you can adjust the adjustable leveler on the front right until the door is bett er aligned.
If the left door appears to be hanging low, you can adjust the adjustable leveler on the front left until the door is bett er aligned.
How to use Drywall Anchors
5/16â Drill Bit
5/16â HoleW
3. Begin tightening.
4. Anchor is secure when screw is tightened to 100%
1. Drill hole with 5/16â bit.
2. Pinch and insert.
Letâs get this storage cabinet secured to the wall. Find where you want it to live and then mount the Plastic Bracket (19) to the wall using the provided Wall Anchors (18) or (20) and Screws (21). We recommend using a 5/16â drill bit or 1/4â Drill Bit.
IMPORTANT NOTE: Drywall Anch or ( 18) req uires 5/16â Drill Bit Non-Drywall Anchor (20) req uires 1/4â Drill Bit
Step 15
Safety first! Secure the Plastic Bracket (for Anti-Tip) (19) to the back of the unnit using the M3.5x15mm Screws (23) and then loop the Plastic Tether (22) through the Bracket.
IMPORTANT NOTE:
Young children (and/or pets) can be seriously injured by tipping furniture units. You must install the provided anti-tip kit hardware solution, as instructed, to prevent the furniture unit(s) from tipping over â which could possibly lead to injuries or damage.
The provided anti-tip kit hardware solution is intended only as an additional safety measure & deterrent; it is not a substitute for proper adult supervision.
The provided anti-tip kit hardware solution is not an earthquake restraint. If you wish to add the extra security of earthquake restraints, they must be purchased & installed separately.
No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.
Our way Their way
Give us a call
Replacement
You
Re-package item
Schedule pick up
Track package
Replacement
You
We really donât want you to go through the hassle of re-packaging your item and sending it back, because letâs be honestâŠnobody has time for that.
Safety first, fun later
We want your product to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months.
For proper care and treatment, please check our website at NathanJames.com/products
Safe use of this product starts with you.
Use this product responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
Do
not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which NJ will not be responsible for.
DO NOT use for commercial purposes
DO NOT frolic on storage cabinet
DO NOT use storage cabinet as foot stool
Proper use
DO NOT leave spilled liquid on cabinet
DO NOT use storage cabinet if damaged
DO NOT make temporary repairs
DO NOT use outdoors
We are only in business if youâre happy For
starters, thanks for being you.
Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happenâas humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Brooklyn Burdon Founder, Nathan James
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.