Vera Storage Unit Instruction Sheet

Let’s build the

Vera Storage Unit 0

80

SEMBL

Y

A

S

MINU

TE

8

SKU 71501

Scan me!

Free Lifetime Warranty 23-1122

Ok, let’s get rolling

What’s included Description

Qty

1

Top Panel

1

2

Left Side Panel

1

3

Right Side Panel

1

4

Shelf

1

5

Bottom Panel

1

6

Back Panel

1

7

Top Stretcher

2

8

Bottom Stretcher

1

9

Left Door

1

10

Right Door

1

11

Leg

4

This should be easy, just follow our instructions and you will be back to Netflix in no time.

Estimated time for assembly

80:00 What you need • •

•

Some of your favourite bubbly or your preferred relaxant Use the packaging carton as a working surface to prevent product damage during assembly Phillips screwdriver

Do not use a drill

Weight Limitation

90

lbs total capacity

20

lbs for shelf

Scan me!

Toll-free at 1-866-619-1004 Help@nathanjames.com Nathanjames.com/help

Free Lifetime Warranty

2

The goods

IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.

2. Do not over tighten screws and bolts to avoid stripping.

3. Please use hand tools to assemble this product. Do not use power tools.

3

What’s included Description

Qty

A

M6*35MM Cam Bolt

18

B

Φ15x12MM Cam Lock

18

C

M8*30MM Wooden Dowel

23

D

M3.5*14MM Screw

4

E

M3*12MM Screw

4

F

Allen Key

1

G

M6*12MM Bolt

16

H

Hinge

4

I

Handle

2

J

Shelf Pin

4

K

M3*14MM Screw

4

L

Magnetic Door Catch Plate

4

M

M4*14MM Screw

24

N

M6*25MM Bolt

8

O

Magnetic Door Catch

2

P

Metal Bracket (For Anti-Tip)

2

Q

M6*30MM Wall Anchor

1

R

M4.2*32MM Screw for Wall Anchor

3

S

M4.2*17MM Screw

1

T

Plastic Strip (For Anti-Tip)

1

4

The goods A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

5

Step 1 It’s cam bolt time! Push the M6*35MM Cam Bolts (A) into the pre-drilled holes on the Left Side Panel (2), Right Side Panel (3), and Bottom Panel (5).

K

K O

Secure a Magnetic Door Catch (O) on both the Top Panel (1) and Bottom Panel (5).

6

Step 2 Take the Top Stretchers (7) and secure it onto the Top Panel (1) using the Wooden Dowels (C) and Cam Locks (B). See the following page for instructions on how to use Cam Locks.

Step 3 We’re off to a great start! Begin to secure the Bottom Stretcher (8) to the Bottom Panel (5) using the Wooden Dowels (C). Finish by screwing in the M4.2*32MM Screw (R).

7

8

Step 4 Put the Top Panel (1) into position on the Side Panel (2).

Step 5 Attach the Top Panel (1) to the Left Side Panel (2) using the M6*25MM Bolts (N).

Don’t forget: righty-tighty, lefty-loosey!

F

9

Step 6 Put the Bottom Panel (5) into position on the Left Side Panel (2).

Step 7 Attach the Bottom Panel (5) to the Left Side Panel (2) using the M6*25MM Bolts (N).

10

Step 8 No, this isn’t Deja-Vu! Twist on the Cam Locks (B) to fully secure the Bottom Panel (5) and the Top Panel (1) and the Left Side Panel (2) together.

11

Step 9 You’re over halfway done!

Carefully slide in the Back Panel (6).

12

Step 10 Attach the Right Side Panel (3) to the unit.

13

Step 11 Finish securing by twisting on the Cam Locks (B).

14

Step 12 Attach the Metal Bracket (P) with the M4.2*17MM Screw (S) on the back of the unit.

Now would be a great time to grab a snack before we work on attaching the legs!

15

Step 13 Attach the Top Panel (1) and Bottom Panel (5) to the Right Side Panel (3) using the M6*25MM Bolts (N) and the provided Allen Key (F).

F

16

Step 14 How’s that snack?

Attach the four Legs (11) to the Bottom Panel (5) using the M6*12MM Bolt (G). Make sure the included floor protectors are secure and level.

17

Step 15 Grab the Left Door (9) and Right Door (10) and follow these instructions for both: attach the Hinges (H) using the M4*14MM screws (M), attach the Handle (I) using the M3.5*14MM Screws (D), and attach the Magnetic Door Catch Plates (L) with the M3*12MM Screws (E).

18

Step 16 Secure the doors onto the unit by the Hinges (H) using the M4*14MM screws (M).

It’s all coming together!

19

Is your cabinet door looking crooked or unevenly spaced?

Then you’ve come to the right place. Follow the illustrations below to get your cabinet door aligned and ready for action.

If your door is too low or too high…

Loosen the height screws, then move the door up or down to make it level.

Loosen the side-to-side screws, then screw counter-clockwise to make the gap wider or clockwise to close any gaps.

If you need to adjust the depth of the doors…

Adjust the in-and-out screws until the door is aligned with the side of the cabinet.

20

Is your cabinet door looking crooked or unevenly spaced? (Cont.)

If you’re still having trouble lining everything up, your next step should be to try to adjust the feet slightly to square up the cabinet & doors. Follow the illustrations below: If the right door appears to be hanging low, you can adjust the adjustable leveler on the front right until the door is better aligned.

If the left door appears to be hanging low, you can adjust the adjustable leveler on the front left until the door is better aligned.

21

Step 17 Where were we? Time for the Shelf (4)! Twist on the Shelf Pins (J) at the desired shelf height.

Tip from a friend to a friend: choose the highest option if you plan on storing beverages on the bottom shelf. Cheers!

22

Step 18 Safety first! Start by drilling a hole into the wall where your unit will be secured.

Next, push the M6*30MM Wall Anchor (Q) into the newly drilled hole then secure the Metal Bracket (P) to the wall with a M4.2*32MM Screw (R).

Loop the Plastic Strip (T) through the Metal Bracket (P) attached to the storage unit and the one attached to the wall before pulling on the end of the Plastic Strip to tighten things up and secure them in place.

You did it! Time for a celebratory pizza? We think so.

23

No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.

Our way

Their way

Give us a call

Re-package item

Replacement

Schedule pick up

You

Track package Replacement You

We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.

24

Safety first, fun later We want your Vera Storage Unit to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months.

For proper care and treatment please check our website at NathanJames.com/products

Safe use of this product starts with you.

Do not modify the structure of this product in any way.

Use this storage unit responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.

Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which NJ will not be responsible for.

Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.

Proper use

DO NOT

use for commercial purposes

DO NOT

place on uneven floor or surface

DO NOT

use as a step stool or stand on unit

DO NOT

leave spilled liquid on unit

DO NOT

put hot serving liquid directly on unit

DO NOT

use unit if damaged or broken

DO NOT

make temporary repairs

DO NOT

use outdoors

25

We are only in business if you’re happy For starters, thanks for being you.

Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help

We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.

Warranty This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q

Did we do alright? Please spread the love!

If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.

Brooklyn Burdon Founder, Nathan James

26