The goods

1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.

2. Do not over tighten screws and bolts to avoid stripping.

3. Please use hand tools to assemble this product. Do not use power tools.

Lay down packaging or carpet as a working surface and let’s fire this thing up!

Step 2

TIP: You don’t need to follow the pre-drilled holes. Make sure leafs are flush and apply pressure when using a screw driver.

Screw in the Cross Bar (F) to the Side Frame Legs (E) and you’re good to go!

Gently press the button into the drill holes with your hand.

For aesthetics, when assembling the “X” legs, face the larger holes to the outside. Otherwise screws will be exposed.

For the table to be extra sturdy, lift the drop leaf an extra bit and really pull the support bar tight against edge.

If you want to drop it like it’s hot, hold the side of the table and slide the crossbars inward towards the middle of the table.