Evelyn Console Table Let’s build the 23-1211-VN Scan me! Free Lifetime Warranty 15 15 M I NUTE ASSE MBLY SKU 38101
Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time.
Estimated time for assembly
45:00
What you need
• Some of your favourite bubbly or your preferred relaxant
• Use the packaging carton as a working surface to prevent product damage during assembly
• Phillips head screwdriver
• Drill
• 1/4” or 5/16” Drill Bit
Weight Limitation
•
•
•
What’s included
Toll-free at 1-866-619-1004
Help@nathanjames.com
Nathanjames.com/help
2
Combined Max. Capacity: 120 lbs.
Top Max. Capacity: 70 lbs.
Drawer Max. Capacity: 10 lbs. per drawer
Shelf Max. Capacity: 30 lbs. Description Qty A Cabinet Sub-assembly 1 B Legs 4 C Shelf 1 D Left Drawer 1 E Right Drawer 1 1 1/4 x 2 9/16 inch Hex Button Head Bolt 12 2 1/4 x 1/2 inch Spring Washer 12 3 1/4 × 5/8 inch Flat Washer 12 4 Allen Key 1 5 5/32” × 1 3/8” Bolt 2 6 Drawer Knob 2 7 Adjustable Levelers (extra) 2
me! Free Lifetime Warranty
Scan
The goods
IMPORTANT
1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
2. Do not over tighten screws and bolts to avoid stripping.
3
4
Description Qty 8 Plastic Bracket (for Anti-Tip Kit) 2 9 Non-drywall Wall Anchor (for Anti-Tip Kit) 2 10 M4* 50mm Screw 2 11 M3.5*15mm Screw 2 12 Plastic Tether Strap (for Anti-Tip Kit) 1 13 Drywall Wall Anchor (for Anti-Tip Kit) 2
What’s included
Step 1
Let’s get this thing fired up! Start by carefully taking the Left Drawer (D) and Right Drawer (E) out of the Cabinet Sub Assembly (A). Then, flip the Cabinet Sub Assembly (A) over!
5
Step 2
Secure the Legs (B) to the corners of the Cabinet Sub Assembly (A) using the 1/4 × 5/8 inch Flat Washers (3), 1/4 x 1/2 inch Spring Washer (2), and 1/4 x 2 9/16 inch Hex Button Head Bolts (1). Tighten to 75% using the Allen Key (4).
6
Step 3
You’re doing great! Secure the Shelf (C) to the Legs (B) using the 1/4 × 5/8 inch Flat Washers (3), 1/4 x 1/2 inch Spring Washer (2), and 1/4 x 2 9/16 inch Hex Button Head Bolts (1). Tighten to 75% using the Allen Key (4).
7
Step 4
Now would be a good step to give your wrists a quick break...
Ready?
Now go back and tighten all screws to 100% and then carefully flip the console over.
8
Step 5
Time to dress this console up! Secure the Drawer Knobs (6) to the front of the Drawers (D)(E) using a 5/32” × 1 3/8” Bolt per knob. Then, slide the drawers into the unit, as pictured below.
9
Step 6
Safety first! Time to secure the console to the wall!
Drill two holes into your wall using a 1/4” drill bit. If you have Non-Drywall, push two Anchors (9) into the holes. Then, secure the Plastic Bracket (8) using two M4* 50mm Screws (10).
Attach the other Plastic Bracket (8) to the back of the console using two M3.5*15mm Screws (11). Finally, tether the cabinet to the wall by threading the Plastic Tether (12) through the Plastic Brackets (8).
IMPORTANT NOTE:
Drywall requires Drywall Anchor (13); drill holes using 5/16” drill bit. Non-Drywall requires Non-Drywall Anchor (9); drill holes using 1/4” drill bit.
10
How to use Drywall Anchors
WALL
WALL
5/16” Drill Bit
1. Drill hole with 5/16” bit.
5/16” Hole
2. Pinch and insert.
3. Begin tightening.
4. Anchor is secure when screw is tightened to 100%
11
Safety first, fun later
We want your product to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months.
For proper care and treatment, please check our website at NathanJames.com/products
Safe use of this product starts with you.
Use this product responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which NJ will not be responsible for.
DO NOT use for commercial purposes
DO NOT frolic on bar stool
Proper use
DO NOT use bar stool as foot stool
DO NOT leave spilled liquid on seat
DO NOT use bar stool if damaged
DO NOT make temporary repairs
DO NOT use outdoors
13
We are only in business if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004
Help@nathanjames.com
NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Brooklyn Burdon Founder, Nathan James
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.
14
