Bonnie Side Table
Let’s build the 22-0831 90 90 M I NUTE ASSE MBLY Scan me! FreeDigitalInspirationInstructionsLifetimeWarranty SKU 35601
What you need
• Some of your favourite bubbly or your preferred relaxant • Use the packaging carton as a working surface to prevent product damage during assembly Description Qty 1 Top Panel 1 2 Bottom Unit 1 3 Left Side Panel 1 4 Right Side Panel 1 5 Front Stretcher 1 6 Back Vertical Stretcher 1 7 Legs 4 8 Back Panel 1 9 Drawer Front Panel 1 10 Drawer Left Side Panel 1 11 Drawer Right Side Panel 1 12 Drawer Back Panel 1 13 Drawer Bottom Panel 1 14 Door 1 90:00 Estimated time for assembly lbs90table top Weight Limitation Toll-free at Nathanjames.com/helpHelp@nathanjames.com1-866-619-1004 Do not use a drill Scan me! Inspiration Digital Instructions Free Lifetime Warranty lbs11for drawer lbs33for cabinet
2 This should be easy, just follow our instructions and you will be back to Netflix in no time.
Ok, let’s
get rolling
What’s included
3
The goods
IMPORTANT
1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
3. Please use hand tools to assemble this product. Do not use power tools.
1 6 8 3 5 4 2 7 7 7 7 14 12 11 10 9 13
2. Do not over tighten screws and bolts to avoid stripping.
12
1 M Hinge 2 N Door
A Cam Bolt Cam Lock
C 4*30MM Wooden Dowel
G 4*30MM Screw
2 O
8
D 4*35MM Screw
E 3.5*10MM Screw
F 4*12MM Screw
4
8 I
12
8 J
2 L
1 Q Spring
11 B
5
Description Qty
1 K
What’s included
11
H 6*50MM Bolt Flat Washer 4*16MM Bolt Knob 4*25MM Bolt Stop Drawer Runner Set Key Washer
4
1 P Allen
14
A
The goods H I J K L N P Q B C D E F
5
G
OM
Let’s get this thing fired up! Start by attaching the Drawer Left Side Panel (10) and Drawer Right Side Panel (11) to the Drawer Back Panel (12) with the 4*30MM Screws (G).
Step 1 10 11 12 13 10 12 G11GGG
Once the side panels are secured, slide in the Drawer Bottom Panel (13), following the grooves in the panels.
6
7
Carefully push four Cam Bolts (A) into the openings in the Drawer Front Panel (9). Then take the Drawer Front Panel (9) and line up the Cam Bolts with the holes on the Drawer Left Side (10) and Drawer Right Side (11) and push it in. Secure with four Cam Locks (B).
Step 2 9 A A A10A 13 11 9BB BB
Time for the drawer slides! With the drawer flipped upside down, secure the Drawer Runners Set (O)using the 3.5*10MM screws (E).
Pay careful attention to the labels on the Drawer Runner Set (O):
DL: this attaches to the Drawer Left Side Panel (10).
DR: this attaches to the Drawer Right Side Panel (11).
Step 3 DL DR E E DLO OE E DR 12 13 11
8
9
Attach the Drawer Runner Set (O) marked CR to the Right Side Panel (4) using the 3.5*10MM screws (E).
O O A A A
Attach the Drawer Runner Set (O) marked CL to the Left Side Panel (3) using the 3.5*10MM Screws (E). Back
We completely understand if you never want to see another screw again after this step.
Step 4 E E E E E E E E E E E E E E E EEE 4 3 Back Front Front
Then attach the Front Stretcher (5) to the Left Side Panel (3) and Right Side Panel (4) using the 4*30MM Wooden Dowels (C) and Cam Locks (B).
Step 5 E E E E E E N N N 5 54 3 C C B B
Secure two Door Stops (N) on the Front Stretcher (5) using four 3.5*10MM Screws (E).
10
11
Push five Cam Bolts (A) into the Top Panel (1).
Step 6 1 A A A A A
12
Take the Front Stretcher (5) and side panels you assembled from Step 5 and secure it to the Top Panel (1) using the 4*30MM Wooden Dowels (C) and Cam Locks (B). Then, do the same to secure the Back Vertical Stretcher (6) to the Top Panel (1), as well. You’re over halfway there!
Step 7 6 3 4 5 1 B B C C C C C
13
Cha-cha slide in the Back Panel (8)don’t hurt yourself!
Step 8 4 3 8 5 1
Step 9 D D D D D C C C CC 6 4 2 3
14
Insert five Wooden Dowels (C) into the Left Side Panel (3), Right Side Panel (4) and Back Vertical Stretcher (6). Then, line up the holes on the Bottom Unit (2) with the Wooden Dowels and secure using five 4*35MM Screws (D).
15
It’s all coming together!
Let’s not forget about the Legs (7)! Secure each by first placing the Flat Washer (I), then Spring Washer (Q) and then 6*50MM Bolt (H), tightening with the Allen Key (P). Repeat for all four legs.
Step 10 I I Q Q H H P 4 3 5 72 7 7 7
Secure the two Hinges (M) onto the Door (14) using two 4*12MM Screws (F) per hinge.
F F F F M M
16
Step 11 14
17
Step 12 B.A. 1 4 3 1 14 14 K L L K FF F F FF FF
Once you’ve decided, secure the Door (14) onto the unit by using the 4*12MM Screws (F) to secure the hinges. Then, use the 4*25MM Bolt (L) to secure the Knob (K) on the front of the door.
Would you believe us if we told you that you are ONE step away from being done?! Choose between Option A or Option B below to decide which way you want your door to face.
If you need to adjust the depth of the doors…
If your door is too low or too high…
Loosen the height screws, then move the door up or down to make it level.
Then you’ve come to the right place. Follow the illustrations below to get your cabinet door aligned and ready for action.
Loosen the side -to-side screws, then screw counter-clock wise to make the gap wider or clock wise to close any gaps
Adjust the in-and-out screws until the door is aligned with the side of the cabinet.
Is your c abinet door looking crooked or unevenly spaced?
18
We lied. The very last step is to order yourself a celebratory pizza. You deserve it!
19
You made it. The very last step! Use the 4*16MM Bolt (J) to secure the Knob (K) onto the front of the drawer and then slide the drawer onto the unit.
Step 13 B.A. 1 1 3 3 9 9 J J K K J
Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.
No whenheartburn,wehandle the return
20
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Our way Their way
Give
us a Replacementcall Replacement You Re-package item Schedule pick up Track package You
21
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which NJ will not be responsible for.
We want your Bonnie Side Table to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months.
Proper use
DO NOT use if table is damaged or broken DO NOT make temporary repairs DO NOT use outdoors
DO NOT place on uneven floor or surface
Safe use of this product starts with you.
Use this side table responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
Do not modify the structure of this product in any way.
DO NOT use for commercial purposes
Safety first, fun later
For proper care and treatment of wood please check our website at NathanJames.com/products
DO NOT use as a step-stool or stand on table DO NOT put hot serving liquid directly on the table DO NOT leave spilled liquid on the table
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.
Founder, Nathan James
We are only in business if you’re happy
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Brooklyn Burdon
22
Toll-free at NathanJames.com/helpHelp@nathanjames.com1-866-619-1004
This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Warranty
For starters, thanks for being you.