The goods

Step 1

Let’s get this thing fired up! Lay down the packaging carton or use carpet as a working surface.

To start, screw the M6*35mm Cam Bolts (A) into the Top Panel (1), Left Side Panel (2), Right Side Panel (3), and Drawer Front (9).

Step 2

Attach the Drawer Left Side (10) and Drawer Right Side (11) to the Drawer Back (12) using the M4*30mm Screws (D).

Step 3

To finish up the drawer, slide in the Drawer Bottom (13). Then attach the Drawer Front (9) using the M6*30mm Wooden Dowels (C). Once in place, use the 15*19.5mm Cam Locks (B) to secure.

Finally, attach the Handle (L) using the M4*16mm Screw (M).

Step 4

Get those Drawer Sliders (F) out and let’s finish this drawer! Using the M3*12mm Screws (E) and the diagram below, align the DL and DR Drawer Sliders and secure in place.

Tip from a friend to a friend: Pay careful attention that your sliders are on the correct way— look for the DR and DL markers!

Step 5

We know this graphic looks intense, but trust us, it’s easy! Secure the Left Side Panel Slider (F)(CL) and Right Side Panel Slider (F)(CR) to Left Side Panel (2) and Right Side Panel (3) using the M3*12mm Screws (E). Finally, add Wooden Dowels (C) to both Panels (2)(3).

Step 6

Next, insert Wooden Dowels (C) into the sides of the Back Stretcher (5).

Then secure the Back Stretcher (5) to the Right Side Panel (3) and use the Cam Lock (B) to secure in place.

Step 7

Take the cabinet you’ve built so far from Step 6 and attach the Bottom Panel (4) using the Wooden Dowels (C). Once in place, secure using the Cam Locks (B), then place a PVC Sticker (K) over the top of the Cam Locks if you don’t want them to be visible.

Attach the Left Side Panel (2) by repeating the process from Step 7, and continue placing the PVC Stickers (K) over the Cam Locks (B).

Step 9

You’re doing so well! So we decided to make this step super easy for you. Just slide in the Back Panel (6).

Step 10

Now attach the Top Panel (1) by aligning the holes in the Top Panel with the Wooden Dowels already placed in the cabinet sides in previous steps. Once in place, secure using the Cam Locks (B).

Now turn around the cabinet and secure the French Cleat (7) pieces by lining up the Cam Bolts (A). Once in place, secure using the Cam Locks (B).

Now reach into the back of the panel and secure the Back Stretcher (5) using the M4*30mm Screws (D).