Let’s build the 24-0314-VN Scan me! Inspiration Digital Instructions Free Lifetime Warranty 30 30 M I NUTE ASSE MBLY SKU 33801
Kensi End Table
Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time.
30:00
What you need
• Some of your favourite bubbly or your preferred relaxant
• Use the packaging carton as a working surface to prevent product damage during assembly
•
Do not use a drill
Toll-free at 1-866-619-1004 Help@nathanjames.com Nathanjames.com/help
What’s included
2
Phillips head screwdriver Description Qty 1 Top Panel 1 2 Left Side Panel 1 3 Right Side Panel 1 4 Bottom Panel 1 5 Center Stretcher 1 6 Back Panel 1 7 Top Metal Stretcher 2 8 Bottom Metal Stretcher 1 9 Side Metal Frame 2 10 Drawer Bottom 1 11 Drawer Front 1 12 Drawer Left Side 1 13 Drawer Right Side 1 14 Drawer Back 1
90 lbs per shelf 11 lbs drawer Weight Limitation
Estimated time for assembly
me! Inspiration Digital Instructions Free Lifetime Warranty
Scan
The goods
3
What’s included
4
Description Qty A M6*35 Cam Bolt 8 B 15 x 9.5 mm Cam Lock 8 C M6*30 mm Wooden Dowel 12 D M4*35 mm Screw 8 E M3*12 mm Screw 14 F Left Side Panel Slider (CL) 1 F Right Side Panel Slider (CR) 1 F Right Side Drawer Slider (DR) 1 F Left Side Drawer Slider (DL) 1 G M6*40 mm Bolt 6 H M6*25 mm Bolt 6 I Allen Key 1 J Handle 1
The goods
IMPORTANT
1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
2. Do not over tighten screws and bolts to avoid stripping.
3. Please use hand tools to assemble this product. Do not use power tools.
5
Step 1
Alright, let’s get this thing fired up! First thing’s first. Attach the Top (7) and Bottom (8) Metal Stretchers to the Side Metal Frames (9) using the M6*40 mm Bolts (G). Don’t forget to make sure the feet are pointing down! Use the Allen Key (I) to tighten the screws to 80%.
6
Step 2
What time is it? That’s right, it’s Cam Bolt time!
Screw the Cam Bolts (A) into the Top Panel (1), Left Side Panel (2), Right Side Panel (3), and Drawer Front (11).
7
Step 3
Now it’s time to attach the Left Side Panel Slider (CL) (F) to the Left Side Panel (2) using the M3*12 mm Screws (E). Insert the Wooden Dowels (C) into the sides of the panel.
8
E E E E E E E E E C C C C BACK FRONT CL F (CL) 2 CL
Step 3 Cont.
Repeat that process with the Right Side Panel Slider (CR) (F) and Right Side Panel (3).
9
CR E E E C C C C CR FRONT
3 F (CR) E E E
BACK
Step 4
Now let’s attach the Center Stretcher (5) to the side panels (2) (3) using the Wooden Dowels (C). While you’re here, insert the Cam Locks (B) into the Center Stretcher (5).
See following page for Cam Lock Assembly Quick Guide.
Step 5
Time to lock it all up! Align the Top Panel (1) to the Side Panels (2) (3) and attach together using the Cam Bolts and Wooden Dowels you already attached. Insert Cam Locks (B) into the Side Panels.
10
How to use cam locks
Did you know?
Cam locks are used to join t wo panels together, usually the edge of one to the flat side of another.
First, your cam bolt (or cam pin) will need to be properly inser ted into the flat side of the board.
Import ant Note: Only tighten the cam bolt until it is secure. Do not over-tighten.
Next, you will fit the proper hole on the edge of the associated joining panel over the cam bolt
Import ant Note: When installed properly, the head of the cam bolt will be visible through the larger hole on the side of the joining panel.
Next, you will notice the cam lock has a “C” shaped back. Commonly, an arrow on the front of the cam lock points in the same direct ion as the open sec tion on back .
Using these as your cue, insert the cam lock into the large hole so the opening of the “C” fits over the head of the cam bolt
Using a screwdriver, you will turn the cam lock until it stops, usually between 130º or 180º. You will feel the panels pulling closer un til they are secured.
Import ant Note: Only turn the cam lock until the panels are fully engaged & feel secure. Turning too far may lead to hardware failure.
Still having issues?
If a cam loc k seem s to be spinning in plac e or is not “catching” or pulling the panel s together as expected, first rem ove th e cam loc k & try again whil e mak in g sure that every thing is properly positoned & oriented .
If you are still having issues getting things work in g as expected, firs t rem ove the cam lock then unscre w th e cam bolt slightl y (less than 1 complete turn) to s ee if that helps with the alignment of the cam lock & bolt.
11
Step 6
Slide the Back Panel (6) into the groove in the Side and Top Panels (1) (2) (3).
Groovy! (Sorry, that was a terrible joke).
Step 7
You’re almost done! We smell pizza in your future…but first, attach the Bottom Panel (4) to the Side and Back Panels using M4*35 mm Screws (D).
12
Step 8
Remember that frame we put together in step 1? Well, grab that and attach it to the Bottom Panel (4) using M6*25 mm Bolts (H). Use the Allen Key (I) to tighten all bolts to 100%.
13
Step 9
It’s time to put the drawer together! Attach the Drawer
Back (14) to the Drawer
Left (12) and Right Sides (13) using M4*35 mm Screws (D). Then slide the Drawer
Bottom (10) into the groove.
Step 10
Every good drawer needs a drawer front. Insert the Drawer
Front (11) using Wooden Dowels (C) and Cam Bolts (A). Then insert the Cam Locks (B) to lock those in place. Attach the Handle (J) to the top of the drawer using M3*12 mm Screws (E).
14
Step 11
Time to make sure that drawer slides. Attach the Left (DL) (F) and Right Side
Drawer Sliders (DR) (F) to the bottom of the drawer using M3*12 mm Screws (E). Make sure you attach them to the correct sides!
15
DL DR E E E E E E F (DL) F (DR) 11
Step 12
Now just slide that beautiful drawer in and adjust the feet as necessary! You did it! We’re so proud of you. Now where’s that pizza we ordered…?
Wobbly or unlevel?
Adjust feet until stable!
16
No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.
Our way
Give us a call
Replacement
You
Their way
Re-package item
Schedule pick up
Track package
Replacement
You
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
17
Safety first, fun later
We want your Kensi End Table to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months.
For proper care and treatment of wood & metal please check our website at NathanJames.com/products
Safe use of this product starts with you.
Use this Kensi End Table responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which NJ will not be responsible for.
DO NOT use for commercial purposes
DO NOT climb on side table
DO NOT exceed weight limit
Proper use
DO NOT leave spilled liquid on side table
DO NOT use if side table is damaged or broken
DO NOT make temporary repairs
DO NOT use outdoors
18
We are only in business if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004
Help@nathanjames.com
NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.
Brooklyn Burdon
19
Founder, Nathan James