1 minute read
Step 2: Using the Mounting Installation Template
Unroll it
Unroll the paper Mounting Installation Template (6) and remove the adhesive backing at the corners.
Place it
Locate where you would like to mount the side table and apply the Mounting Installation Template (6) to the wall in that location. Make sure the template and holes are level.
Mark it
Using the holes in the template, mark the location of each hole on the wall. These will become your guides as to where to drill the holes for the wall anchors.
Remove it
Slowly remove the paper, ensuring that all holes have been marked.
Drill it
Drill each hole to the suggested size.
Important Note: Recommended Drill Bit = 5/16”
See following pages for more detail.
