The goods

Important

1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.

2. Do not over tighten screws and bolts to avoid stripping.

3. Please use hand tools to assemble this product. Do not use power tools.

Step 1

Okay, let’s get this thing fired up! Don’t worry, we’ll get you back to your Netflix show in 15 minutes. You got this!

To start, attach the Frame Legs (A) to the Seat (B) using the M6*18mm Bolts (2). First place the Washer (3) on the bottom, then the Spring Washer (4), then tighten the M6*18mm Bolt (2) to 75% using the Allen Key (5).

Step 2

Now it’s time to make sure the stool is nice and secure. Use the Allen Key (5) to attach the Cross Bar (D) to the Frame Legs (A) using M6*30mm Bolts (1). Tighten to 75%.

You’re within minutes of pressing play on Netflix! Now attach the Foot Rest Frame (C) to the Frame Legs (A) with the M6*30mm Bolts (1). Once ALL bolts are aligned, use the Allen Key (5) to tighten all bolts to 100% (including those from Step 1 and 2).

Step 4

To finish up your new bar stool, adjust the attached foot pads to make sure the stool is level.

And now you’re all done! We knew you could do it. Time to treat yourself to a pizza.

Once ALL bolts are aligned, go ahead and tighten them all to 100% (including those from Step 1 and 2)