1 minute read
The goods
Next Article
Important
1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
2. Do not over tighten screws and bolts to avoid stripping.
3. Please use hand tools to assemble this product. Do not use power tools.
Step 1
Let’s get this thing fired up! Please take a moment to match the sticker on the bottom of the chair back with the sticker on the corner block.
Once aligned, attach the Seat Cushion (B) to the Chair Back (A). Secure by placing a ¼ inch Flat Washer (5) down first, then a ¼ inch Lock Washer (4), followed by a ¼ x 1½ inch Hex Button Head Bolt (1). Tighten using the Allen Key (7).
Do NOT overt ighten hardware.
Step 2
Now let’s secure those legs in place! Consider this your workout of the day.
Secure by placing a ¼ inch Flat Washer (5) down first, then a ¼ inch Lock Washer (4), followed by a ¼ by 3⅛ inch Hex Button Head Bolt (3). Tighten using the Allen Key (7).
Do NOT overt ighten hardware.
Step 3
Match the sticker on the bottom of the front chair legs with the sticker on the corner blocks before tightening hardware.
Once matched, secure by placing a ¼ inch Flat Washer (5) down first, then a ¼ inch Lock Washer (4), followed by a ¼ x 2⅜ inch Hex Button Head Bolt (2). Tighten using the Allen Key (7).
Step 4
Last, but not least, screw on the Front Footrest (E) and Side Stretchers (F) using the 4 x 1 ½ inch Phillips Flat-Head Screws (6) and a Phillips head screwdriver. We told you this was going to be easy!
Do NOT overt ighten hardware.
