Zen Catalogue

NASCO STONE+TILE

INSPIRING CREATIVITY SINCE 1965

NASCOSTONETILE.COM

Zen Collection Our high-tech porcelain tiles have a surface that is very resistant to thermal stress, UV radiation, water absorption, stains, and even scratching since they are made from natural ceramic clays and minerals.

In “sustainable” production facilities where resources and water are recycled, our tiles are also manufactured without resin. Your most ambitious architectural design project’s apex is ZEN. This durable surface comes in four natural colors and a variety of sizes, in matte and polished finishes. Two types of mosaics and trim pieces are also offered to accommodate any architectural design concept.

ZEN WHITE POLISHED

ZEN TAUPE MATTE + POLISHED

ZEN GREY MATTE

ZEN GREY SIZE: 12” x 24”, 24” x 48” MOSAIC: 2” x 6” , 2” x 2”

ZEN BEIGE SIZE: 12” x 24”, 24” x 48” MOSAIC: 2” x 6” , 2” x 2”

ZEN TAUPE SIZE: 12” X 24”, 24” x 48” MOSAIC: 2” x 6” , 2” x 2”

ZEN WHITE SIZE: 12” x 24”, 24” x 48” 30” x 60”, 120” x 60” MOSAIC: 2” x 6”, 2” x 2”

ZEN TAUPE MATTE

ZEN WHITE POLISHED

ZEN TAUPE POLISHED

ZEN BEIGE POLISHED

ZEN GREY MATTE + POLISHED

ADDITIONAL PRODUCT INFORMATION PRODUCT

SIZE

MOSAIC

2” x 2” on 12”x 12” Mounted Mesh

MOSAIC

2” x 6” on 12”x 12” Mounted Mesh

BULLNOSE BASE TRIM

4” x 24”

COVE BASE TRIM

6” x 12”

LARGE FORMAT

ZEN WHITE ONLY: 30” x 60”, 120” x 60”

(STANDARD)

FINISHES

ORDER NOTE

MATTE + POLISHED

All sizes are nominal and in inches. Special cut sizes and additional trim pieces are available upon meeting a required minimum order quantity.

All tile contain a special anti-slip finish and pass all wet condition requirements.

TECHINICAL DATA Recommended grout joints: 3/32” or greater.

All sizes modular with 3/16” grout joints (approximately 5 mm).

Grout joints of 1/8” inch or less, especially with larger format tiles or running bond patterns may require floor flatness values in excess of 1/4” in 10’ (or 1/16” in 1.0’) standard required by ANSI. For patterns with running bond/brick joint patterns, NASCO recommends a maximum of 33% offset.

APPLICATIONS All installation work using NASCO tiles will confrom to the standards set forth in the latest version of ANSI A108/118.

INTERIORS

EXTERIORS

WALLS

If you have ay questions or inquires, please email us at info@nascostonetile.com.

FACADE

A P P L I C AT I O N S

FLOORS

WET

H I G H -T R A F F I C

NASCO STONE+TILE

INSPIRING CREATIVITY SINCE 1965

NASCOSTONETILE.COM