Airofog U260 manual EN-NO

ULV Cold Fogger Instruction Manual U260 / U120 U240 / U110

Table of Content 1.

General information

1

2.

Technical specifications

2

3.

Main features

3

4.

Safety instructions

4

5.

To prepare the appliance ready for use

6

6.

Use the extension hose for U260

8

7.

Universal applications

9

8.

Consumption

9

9.

Recommendations on application

10

10.

Maintenance

12

11.

Certificate of guarantee

13

12.

Spare part list of U260/U120

14

Spare part list of U240/U110

16

Explosive drawing of U260/U120

15

Explosive drawing of U240/U110

17

13.

1

1. General Information Thank you for purchasing AIROFOG quality product. We wish you all the success on the application and believe you will be fully satisfied with its performance.

These instructions expatiate all the information necessary for the use of the application by means of explosion drawings, start-up, operation, maintenance, cleaning, trouble-shooting and etc. as well as all the safety precautions to be taken throughout the lifetime of the appliance.

Airofog ULV model U260/U240 (ultra-low volume) cold fogger is in CE conformity in scope of EMC Directive to the norm of EN55014-1: 2006+A1; EN55014-2: 1997+A1+A2; EN61000-3-2: 2006+A1+A2; EN61000-3-3: 2008.

All data and information concerning in this instruction manual are based on and given to the best of our experience and knowledge so far. This manual might change to meet our technical improvement without notice along with the continuous technological development.

Please feel free to contact us for updated information.

Definition of the symbols used: Read this instruction manual carefully The CE mark indicates that the appliance conforms to the EC directives General warning, risk of danger or possibility of damaging the appliance, pay particular attention to the words that follow this symbol.

☞ All other relevant advice Risk of electrical danger, follow the instruction carefully Maintenance service

Airofog ULV Cold Fogger Iss. 261826

2

2. Technical Specifications model:

U260 (220 - 240 V) / U120 (110 -120 V) U240 (220 - 240 V) / U110 (110 - 120V)

electric motor:

220 - 240 V, 50 / 60 Hz, 800 W 110 - 120 V, 50 / 60 Hz, 700 W

solution tank:

5 Litre polyethylene, UV-light resistant

output:

needle dosage control U260 appro. 40-400 ml/min., U240 appro. 25-150 ml/min.,

Optional:

5-positition liquid dosage control U260 appro. 0-260 ml/min

shoulder strap:

double woven, 50 mm wide

standard accessory:

extension hose 50 cm for U260

net weight:

U260/U120: 3.4 kg; U240/U110: 3.1 kg

gross weight:

U260/U120: 4.4 kg; U240/U110: 4.1 kg

dimension:

Ø 28 x H40 cm

packing dimension:

L36 x W32 x H44 cm

Airofog Machinery Co., Ltd.

3

3. Main Features Airofog ULV cold fogger operates effectively according to ultra low volume (ULV) method. A powerful electric motor distributes the fine droplets evenly over the affected area. The droplets remain airborne for a sufficient time.

The needle dosage control knob allows a liquid volume control, depending on the viscosity level of the liquid to be fogged.

1

3

2 4

5

1. On-off switch 2. Flow regulator control knob 3. Power cord

4. Closure ring 5. Solution tank

Airofog ULV Cold Fogger Iss. 261826

4

4. Safety Instructions Please read carefully and understand this instruction manual before working on or operating the appliance to avoid potential problems. ●

Keep this manual. If the appliance is transferred, give the manual to the new owner.

●

Before use, operators must be aware of all protection and safety measures.

●

Preferably wear ear protection against noise.

●

Adhere to chemical suppliers instructions regarding solution concentration and protective measures.

●

Wear a protective mask when fogging with dangerous chemicals and/or air suspended particles.

●

When fogging, use protective equipment, proper respiratory protection, protective gloves as applicable.

●

Store the appliance in a dry place, far from heat sources.

●

Unplug the appliance when it is not in use.

●

Keep the appliance out of the reach of children and the person who is not aware of dangers.

●

To avoid danger of fire or explosion, not to fog flammable liquid, especially in closed areas.

●

Do not fog near naked flames.

●

Never use the appliance with wet hands or feet or with bare feet.

●

Protect the power cord away from heat, oil, sharp edges and rough surfaces.

Airofog Machinery Co., Ltd.

5

●

Do not force or change the moulded plug in any way.

●

Do not use a cord that is cut or frayed, otherwise it is dangerous.

●

Use the appliance only for the purpose it was designed for.

●

Never leave the appliance unattended while it is operating.

●

Avoid breathing fog output and make sure that the air breathed-in by the motor is as dry as possible.

●

Never carry out maintenance service work if the appliance is connected to a power socket.

●

Only service by qualified skilled personnel who are allowed to work with the appliance.

●

Make sure that the voltage indicated or the socket is as the same as that of the motor.

●

Operate in a well ventilated area.

●

Use eye protection and face mask when using this equipmenet.

Airofog ULV Cold Fogger Iss. 261826

6

5. To prepare the appliance ready for use The appliance comes packed in a cardboard box. Check that it is in undamaged condition after removing it from the box.

1

3

2

7

4 8 5

9

6

Use the correct power rating from the identification plate.

If voltage and frequency ratings used are beyond those indicated, the appliance may suffer serious damage and fail to operate in the right way.

Airofog Machinery Co., Ltd.

7

Use the Appliance: !

Make sure the power plug (3) is disconnected from the power socket.

● Remove the closure ring (5) and check the tank (6) is clean.

Replace the power head (7), making sure the tank gasket (4) is in place and return the closure ring (5) to its position. ● Pour the solution into the tank (6) then close the filling cap (8), make sure the gasket (9) is in position. ● Before connecting the power plug (3) to a power socket, make sure that: - flow control knob (2) on close position - switch (1) is set to the off position ● Aim the nozzle in the required direction and switch on the appliance. ● Adjust flow control knob for the quantity of product to be distributed. !

When using solution which creates foam, to keep the foam from penetrating into the power head (7) to damage the motor, in any case the foam level should be kept lower than the PP filter.

your job in a way that the appliance draws in the fog as little as ☞ Plan possible. So it is recommended to work from the treated areas through untreated areas in the exit direction.

Stop the Appliance: ● ● ●

Once fogging is complete, close the control knob before switching off the appliance.

Disconnect the power plug from power socket.

Remove residues of solution and empty tank, fogging with warm water.

Airofog ULV Cold Fogger Iss. 261826

8

6. Use the Extension Hose for U260 You may use the appliance more flexibly with the extension hose (suitable only for U260) to reach further distance and limited area.

58

57

22

261637

Pay attention not to bend or twist the extension solution tube (57) and make sure the extension tube connector (58) fully jointed with the solution feed tube (22).

Airofog Machinery Co., Ltd.

9

7. Universal Applications ● public hygiene such as in communities, hotels, canteens, schools, offices, banks, means of transportation....... ● disinfection in food industry ● disinfection or application of vaccine in intensive livestock ● disinfection in greenhouse and mushroom production ● pest control against flying and crawling insects ● control of mildew and fungus ● odor control

8. Consumption The appliance is fitted with a standard needle dosage control or an optional 5-position dosage control for U260/U120. As the output varies according to different chemicals and physical propertises of the formulations, we advice that you do your own metering of the output under prevailing conditions.

U260 / U120 (without extension hose): Regulator turn water (ml/min., approx.)

1/4 40 ml/min 1/2 80 ml/min 3/4 150 ml/min 1 240 ml/min 1 1/4 300 ml/min 1 1/2 350 ml/min 1 3/4 380 ml/min 2 400 ml/min U240 / U110 1/4 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2

25 ml/min 60 ml/min 75 ml/min 90 ml/min 110 ml/min 125 ml/min 140 ml/min 150 ml/min

Airofog ULV Cold Fogger Iss. 261826

10

U260/U120 5-position liquid dosage control (without extension hose): Regulator turn 0 1 2 3 4 5

water (ml/min., approx.)

0 ml/min 50 ml/min 100 ml/min 150 ml/min 200 ml/min 260 ml/min

Since a fine mist is difficult to be seen, usually it is better to calculate fogging time and volume from the liquid flow rate rather than rely on visible indications.

An optimum distribution rate is 50ml of substance per minute approximately. To establish the application time, firstly determining the total quantity of substance to be applied, in accordance with the formula as below: ( m3 of area to be treated ) x ( ml of substance required for 1m3 ) = ml of substance ml of substance distribution in ml per minute

=

distribution time in minutes

9. Recommendations on Application Before application, make sure you know the required application time and quantity of substance to treat the area, as this will make the job easier.

The ideal condition for the suspension of the minute droplets is around 250C temperature and 75% relative humidity.

During application, never leave the appliance unattended.

Airofog Machinery Co., Ltd.

11

Outdoor Application: ● ● ●

The ideal application time is the cooler period of the day, e.g. early morning or evening when insects are most active.

The ideal wind speed is 5 to 10 km/h. If the wind speed is higher than 15 km/h, the substance is quickly dispersed and is weakened on the effect, we suggest to avoid fogging.

The ideal direction is starting at the point upwind of the area to be treated and keeping the nozzle downwind at chest height.

Indoor Application: Before the application: ● Except for the operator, keep people and animals away from the treated area. ● Close all doors and windows. Keep all air conditioning systems and fans be switched off for at least an hour after the treatment. ● Extinguish all flames, lamps, gas and so on to avoid the risk of explosion although it is remote. ● All foodstuffs, food containers, plants, surfaces and etc. exposed in the air that could come into contact with the fogged substance should be removed, sealed or covered. ● To obtain the best result, leave the doors, drawers and cabinets open inside the area to be treated.

In the application: ● Always move starting from the furthest corner against the exit towards the exit. This will minimize the exposure time to the substance. ● Walk through the area to be treated slowly, taking into consideration the application time. ● Always keep a minimum distance of 1m between the nozzle and all objects.

Short bursts of mist is acceptable aimed at a suspected or contaminated area, which should leave no traces of substance on the surfaces.

After the application: ● Keep the aerosol to rest for as much time as possible, preferably 2-6 hours with the recommended minimum time of 1 hour. ● Open the outdoors and windows to circulate the fresh air of the treated area.

Airofog ULV Cold Fogger Iss. 261826

12

10. Maintenance The only maintenance required is an occasional cleaning of the liquid filter (20) and the PP filter (29 & 29/1). Remove the filter and rinse it with running water to remove the clinging particles.

☞

Avoid contamination when changing chemicals : Fogging with clean water (or appropriate solvent) through unit and rinse tank thoroughly.

29 20 Periodically check the cleanliness of the air filter (11). If the motor does not breathe a sufficient quantity of clean air, the fogging operation will be inefficient and the motor could be overheated.

261637

U240/U110

11

Check seal, gasket, tube and hose for leakage. Replace if necessary.

PLEASE FEEL FREE TO CONTACT US OR YOUR LOCAL DEALER FOR TECHNICAL ASSISTANCE.

Airofog Machinery Co., Ltd.

13

11. Certificate Of Guarantee AIROFOG MACHINERY CO., LTD. (called AIROFOG) guarantees “Airofog ULV Cold Fogger” to be free of defects in materials or workmanship to the original purchaser for a period of one (1) year, on labour and parts which are not subject to usual wear.

During this period, AIROFOG will replace and/or repair the parts with material and/or manufacturing faults (on the exclusive judgement of our technical department) free of charge.

The despatch and return expenses will be borne by the customer.

The guarantee does not cover any damage occurred during transport or by incorrect handling, tempering, improper use, the use of non-recommended products and so on.

Under no circumstances will AIROFOG be liable for damages due to improper use or application. Under no circumstances will AIROFOG be responsible for damages done to any property or persons.

Airofog ULV Cold Fogger Iss. 261826

14

12. Spare Part List of U260 / U120 Pos. Part No.

Description

Pos. Part No.

Description

1

Motor 240 VAC/800W

36

Nozzle Holder

260-001-240

240-036-010

1

260-001-120

Motor 120 VAC/700W

37

240-037-000

Atomizer

2

260-002-000

Motor Sealing Ring

38

240-038-000

Nozzle

3

260-003-240

Power Supply Cpl. 240V

39

240-039-000

Flow Regulator Needle

3

260-003-120

Power Supply Cpl. 120V

39/1

240-039-010

O-Ring

4

260-004-240

Cable 5m 240V

40

240-040-000

E-Ring

4

260-004-120

Cable 5m 120V

41

240-041-000

O-Ring

5

260-005-000

ON-OFF Switch

42

240-042-000

Sticker (+/-)

6

260-006-000

Switch Protector

43

240-043-000

Countersunk Screw M3X45

7

260-007-000

Grommet

45

260-045-000

O-ring

8

260-008-000

EMI Filter

47

260-047-000

Extension Hose Adapter

9

260-009-120

Fuse 10A

48

260-048-000

Washer

10

260-010-000

Tapping Screw

49

260-049-000

Screw M3X22

11

260-011-000

Air Filter

50

260-050-000

Hose Adapter

12

260-012-000

Air Filter Cover

51

260-051-000

Countersunk Screw M3X10

12/1

260-012-010

Cover Holder

52

505-009-141

Nut M3

12/2

260-012-020

Screw M6X12

53

260-053-050

Extension Hose 0.5m Extersion Hose 1m

13

505-009-142

Screw M3X12

53

260-053-100

14

260-014-000

Gasket

54

260-054-000

Countersunk Screw M3X20

15

935-056-010

Gasket

55

260-055-000

Handle

16

260-016-000

Tube Adapter M5

56

260-056-050

Extension Hose 0.5m Assembly

16/1

260-016-010

Tube Adapter M5/M8

56

260-056-100

Extension Hose 1m Assembly

17

260-017-000

Wire Clip

57

260-057-050

Extension Tube 64cm

17/1

240-017-010

Protective Spring

57

260-057-100

Extension Tube 1.2m

17/3

260-017-030

Protective Spring

58

260-058-010

Quick Connector

18

260-018-000

Solution Tube 16cm

59

260-059-050

Extension Hose 0.5m Assembly

61

260-061-000

Carrying Strap

19

240-019-000

Solution Filter Adapter

20

240-020-000

Solution Filter

w/ Adapter

21

240-021-000

Solution Tube Assembly

260-064-000

Sticker Set (www... &Airofog...)

22

260-022-000

Feed Tube 20cm

260-065-000

Label (U260)

23

260-023-000

Feed Tube Assembly

260-066-000

Label (U120)

24

260-024-000

Air Tube 18cm

260-067-000

Sticker Set

260-068-000

Service Kit (15x3,20,29,30,31

260-260-000

Instruction Manual

25

260-025-000

Tube Holder

26

260-026-000

Air Tube Assembly

27

260-027-000

Motor Body "R"

28

260-028-000

Motor Body "L"

(Periodically...&This...&Only...)

32,34/4,39/1,40,41,1.2m tube

29

260-029-000

PP Filter

30

260-030-000

Seal Viton

17/3

260-017-030

31

260-031-000

Seal 50cm

35

260-035-000

Nozzle Assembly

32

260-032-000

Sealing Ring

40

260-040-000

O-Ring

Optional Protective Spring

33

260-033-000

Cloure Ring

41

260-041-000

Nut

34/2

240-034-000

Solution Tank 5L Round

42

260-042-000

Knob

34/3

240-034-010

Cap

43

260-043-000

Countersunk Screw M3X40

34/4

240-034-020

Gasket

44

260-044-000

Nozzle Holder

35

240-035-010

Nozzle Assembly

46

260-046-000

Nozzle Cpl.

Airofog Machinery Co., Ltd.

15

13. Explosive Drawing of U260/U120 12

14

28

11

12/2

U260/U120

13

12/1

25 48 13 26 24 17 16 15

4 6 3

5

31

30 29

10

7 8 9

42 17 / 3

2

35

41 40 35

1

27

optional 46

23

15 16 18 17

22 17/3 58 57

47 48 49 50

55

56

59

45

32 0

1

3/4 1/4

1/2

33

34/4

52 51 53

19 20

34/3

43

54 52

16/1 15

21

44

34/2

42 39 39/1 41 40

17/1

I

tru ns

io ct

l ua an nM

35 38 37

36

43

61

261821

Airofog ULV Cold Fogger Iss. 261826

Bruk av U260 fogger

Skru av lokket og bruk eventuelt en trakt med sil for å unngå urenheter. U260 rommer opptil 5 liter væske.

Før du kobler foggeren til strøm, må du sørge for at flowreguleringsknappen står i lukket posisjon.

På samme måte skal av/på-knappen stå i av-posisjon.

Koble enheten til strøm. Rett dysen i ønsket retning og slå på enheten med av/på-knappen.

Bruk verneutstyr, egnet åndedrettsvern og beskyttelseshansker ved behov.

Planlegg arbeidsruten slik at enheten trekker inn så lite tåke som mulig.

Start alltid påføringen lengst inne i behandlingsområdet og beveg deg mot utgangen.

La aldri enheten stå uten tilsyn under drift, da dette kan gjøre luftfilteret vått og skade enheten.

Juster flowreguleringsknappen til ønsket gjennomstrømningshastighet (utgangsflow).

Når arbeidet er ferdig: Lukk flowreguleringsknappen, og slå av enheten når det ikke lenger kommer væske. Trekk støpselet ut av stikkontakten. Tøm beholderen og skyll den med rent vann. Rengjør enheten og dysene ved å forstøve rent, varmt vann.

Vedlikehold av U260 fogger

Den eneste nødvendige vedlikeholden er rengjøring av luftfilteret og væskefilteret.

Utfør regelmessig kontroll av luftfilteret. Det er enkelt å få tilgang til ved hjelp av en skrutrekker (stjernespor).

Rengjør luftfilteret med trykkluft.

Åpne låseringen og løft foggeren av væskebeholderen.

Kontroller tetningsringen for skader.

Bytt den ut om nødvendig.

Kontroller væskefilteret for skader.

Bytt det ut om nødvendig.

NAC Europe Ellegårdvej 18 DK-6400 Sønderborg Tel. +45 7442 6292 Info@nac-europe.com www.nac-europe.com

AIROFOG MACHINERY CO., LTD. 1ST FL., BLK. 3, NO. 67 LANE 1768, MINHANG DISTRICT, SHANGHAI 201114, P. R. CHINA TEL: + 86 - 21 - 51905296 / 9 FAX: + 86 - 21 - 51905295 www.airofog.com airofog@airofog.com

261826