Vitra Toilet Seats

t e l i o T y M s e r a p S

DIY Toilet Seat Replacement Tips

Fitting a new toilet seat or replacing one is a very simple task. Fixing a toilet seat can qualify for a quick DIY project too. All you need are some necessary tools, and you’re all set ready to go.

Take off the old toilet seat:

•Start by popping off the bolt caps. You may discover these tiny plastic caps affixed to the hinges on the toilet bowl. Gently put your screwdriver by sliding it under the edge & then try to pry the caps off.

• Now, you can grab your wrench & see underneath the toilet bowl’s edge.

There will be bolts that will be going down through the toilet bowl. These bolts are held in place by the nuts.

• Once loosened, take off the old toilet seat’s bolts. You may have to employ a screwdriver to take off them quickly. If so, turn each of the bolts counterclockwise until they come out entirely.

This is usually the way most new toilet seats get fixed. If you discover some difference in your new seat, it’s best to follow the installation instructions that came along with it.

Find a wide range of Vitra Toilet Seats at My Toilet Spares only. We aim to make replacing your toilet seat as less stressful as possible. You can stay connected with us on our facebook , twitter and google+ pages .

Contact Information: Office Address: My Toilet Spares 28 Newland Avenue, Hull, HU5 3AF UNTITED KINGDOM Website: https://www.mytoiletspares.co.uk/