TippingBlowerTrailerSpecificaon
Chassis:
Fruehauf purpose-built step frame Blowing chassis, suitable for 44 tonnes opera on.
Beam Centres at 1180mm, fabricated in house using High Tensile S355 Steel.
Edbro 7483 hydraulic pping ram c/w 1” male screw coupling.
SAF axles fi ed with air suspension and Knorr Bremse calipers as standard.
Rear Li Axle fi ed with auto drop facility and manual override.
Jost 2 speed landing legs with compensa ng feet.
Alcoa Durabrite alloy wheels fi ed with Goodyear MST II tyres, Plas c mudwings and spray flaps.
Knorr Bremse EBS complete with roll stability (ac vated).
Shotblast, primed and 2 pack topcoat paint.
PM1155 weigher fi ed complete with handheld remote.
Full LED ligh ng system complete with 2 addi onal LED reverse lights. 4 addi onal work lights fi ed.
Two hose racks mounted onto neck area of chassis, complete with doors to be secured with an luce catches.
Body:
Ali-Bulk aluminium plank construc on, 2.7mm inside wall and 2.4 external wall, s tch welded internal.
Floor thickness 4.76mm.
3 internal par on doors, each with integral personal door and 5 individual locking posi ons.
Perspex sight window to each compartment.
Full height tailgate, top half clad for signage, external sealed, rack & pinion grain hatch, and sock.
2 number internal e bars.
Front viewing gantry and Shovel rack to front wall.
Circa 64yd³ capacity.
Blowing equipment
Holmes 610 Blower, hydraulically driven by suitably equipped tractor unit.
4” Stainless Steel pipework, two-way discharge complete with4” bu erfly valve.
Hydraulically driven drop through rotary valve, non-return valve, 2½” bu erfly valve.
Control box mounted N/S rear complete with internal light.
Pressure gauge fi ed.
Emergency stop fi ed.
Safety cut off switch to prevent use of the auger and feeder when tailgate is in the open posi on
Flexi blow pipes and clamps included.
6 Discharge pipes, 90° blow bend and bin connectors.
Oil cooler to hydraulic system.
Shee ng system:
Dawbarn Hydoclear side to side shee ng system fi ed complete with remote and body mounted switch
150mm hood height and centre bar.
Chassis Op ons:
Axles – SAF Disc (Standard) – SAF Drum / Jost Disc / BPW Disc / BPW Drum
Li Axle – Rear li (Standard) – Front li op on
Alcoa Durabrite Wheels (Standard) – Non branded Alloy wheels / Steel Wheels
Goodyear MSTII tyres (Standard) – Bridgestone R179 / Bridgestone M op ons
PM1155 weigher with remote – other weigher op ons available
Body Op on:
Front viewing pla orm c/w ladder (N/S or O/S)
Top Half cladding for customer livery
Delete personnel doors from internal doors
Different internal door configura ons to suit
Full tailgate or split tailgate
Auger cover plate to allow trailer to be used as pper only
Recessed side ratchets
9” hood height (Delete 6” hoods)