Eaton Aeroquip 222070 FBM3553 Hose Assembly Lube MSDS

MATERIAL SAFETY DATA SHEET Eaton | Aeroquip Hose Assembly Lubricant SECTION I: PRODUCT IDENTIFICATION Product name or number: Reference numbers NSN# Emergency telephone number: Manufacturer’s name: Distribution through: Address: Manufacturer’s DUNS number: Hazardous material description (49 CFR 172.101):

Hose Assembly Lube 222070, FBM3553, FCM3553, M/00102-0151 915000N024686 419-832-0235 Paramount Products Murdock Industrial Inc. / www.EatonProducts.com 553 Carroll St Akron, OH 44304 USA 60-687-0947 None HMIS Health Fire Reactivity Contact

Additional hazard classes (as applicable): Chemical family: Formula:

None N/A Blend

SECTION II: INGREDIENTS CAS registry number

% weight

Chemical name(s)

Exposure limit

64742-65-0 9003-29-6

80% 20%

HSR PARAFFINIC OIL VI IMPROVER

5mg/m3 none

SECTION III: PHYSICAL PROPERTIES Pale Amber, viscous oil.

SECTION IV: FIRE AND EXPLOSION HAZARD DATA Flash point: Method used: Flammable limits: Extinguishing media: Special fire fighting procedures:

Unusual fire and explosion hazards:

400° F COC LEL: N/A UEL: N/A Fog, foam, and CO2 Use water fog. Do not use direct stream water DO not enter confined fire space without proper protective equipment. This may include self-contained breathing apparatus to protect against the hazardous effect of combustion products and oxygen deficiencies. Cool fire exposed containers with water.

None

1 1 0 B

SECTION V: HEALTH HAZARD DATA Effects of overexposure/conditions to avoid: Threshold limit value: Permissible exposure limit: Primary routes of entry:

Prolonged contact with the concentrate may cause skin and eye irritation N/A N/A Skin and eyes

Emergency and first aid procedures Eyes: Flush with water for 15 minutes. If irritation persists, seek medical assistance.

Skin: Flush with water for 15 minutes. If irritation persists, seek medical assistance.

Ingestion: Do not induce vomiting. Give large amounts of water or milk if available and seek medical assistance.

SECTION VI: REACTIVITY DATA Conditions to avoid: Stability: Incompatibility (materials to avoid): Hazardous decomposition products: Hazards: Conditions to avoid: Polymerization:

None Stable Strong oxidizing agents CO, CO2, oxides of nitrogen and sulfur None known None known Will not occur

SECTION V11: SPILL OR LEAK PROCEDURES Steps to be taken in case material spills or leaks:

Waste disposal method: CERCLA reportable quantity (in pounds) RCRA hazardous waste number: Volatile organic compound: Weight per gallon:

Dike spill area with absorbent material. Pump liquid into approved container. Clean up residue with absorbent material and water. CAUTION: SLIP HAZARD. According to federal, state, and local regulations.

N/A N/A None Analytical pounds

SECTION VIII: SPECIAL PROTECTION INFORMATION Respiratory protection: Ventilation: Special: Other: Protective gloves: Eye protection: Other protective equipment:

No special requirements with adequate ventilation N/A N/A N/A Rubber Safety goggles As requested by operators

SECTION IX: SPECIAL PRECAUTIONS Storing and handling: Other precautions:

Keep container closed when not in use.

Do not reuse empty container. Do not pressurize container.

5/3/2010 Page 2 of 2