Issuu on Google+

Quick Disconnect Couplings

Serving your industry with quality fluid conveying products

Construction

Forestry

Public Safety

Utility

Marine and Defense

Oil and Gas

Transportation

Steel

Machine Tool

FLUID CONVEYING PRODUCTS

Page

Air Couplings FD40 Series – Interchange . . . . . . . . . . . . . . . . . . . . . . . . . . . FD41 Series – Interchange . . . . . . . . . . . . . . . . . . . . . . . . . . . FD43 Series – Interchange . . . . . . . . . . . . . . . . . . . . . . . . . . . Fluid Transfer and Hydraulic FD35 Series – Arc Latch, High Pressure . . . . . . . . . . . . . . . . FD42 Series – Interchange . . . . . . . . . . . . . . . . . . . . . . . . . . . FD45 Series – Interchange – Steel . . . . . . . . . . . . . . . . . . . . FD45 Series – Interchange – Brass . . . . . . . . . . . . . . . . . . . . FD45 Series – Interchange – Stainless Steel . . . . . . . . . . . . FD48 Series – Interchange . . . . . . . . . . . . . . . . . . . . . . . . . . . FD49 Series – HTMA Interchange . . . . . . . . . . . . . . . . . . . . . 5100 Series – Threaded, Low Spill . . . . . . . . . . . . . . . . . . . . 5600 Series – General Purpose . . . . . . . . . . . . . . . . . . . . . . . FD86 Series – DryBreak, High Impulse . . . . . . . . . . . . . . . . . FD89 Series – Flush-Face, Couplings . . . . . . . . . . . . . . . . . .

17 19 21 27 30 33 37 40 44 46 49 57 69 72

Description

Page

Fluid Transfer and Refrigerant 5400 Series – Low Air Inclusion, Low Fluid Loss . . . . . . . . 52 Hydraulic Farm FD70 Series – Male Tip – Deere . . . . . . . . . . . . . . . . . . . . . . 68 FD71 Series – Push to Connect – ISO . . . . . . . . . . . . . . . . . . 64 FD72 Series – Push to Connect – Connect Under Pressure . . . . . 66 FD76 Series – Male Tip – ISO . . . . . . . . . . . . . . . . . . . . . . . . 68 Special Application FD14 Series – Drain Coupling . . . . . . . . . . . . . . . . . . . . . . . . 23 FD15 Series – Oil Sampling Valve . . . . . . . . . . . . . . . . . . . . 25 FD69 Series – High Pressure/Water Blast . . . . . . . . . . . . . . . 62 FD90 Series – Diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Configuration Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Coupling Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Coupling Selection Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Fluid Compatibility Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Industry Application Symbols . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

QUICK DISCONNECT COUPLINGS

Description

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

2

QUICK DISCONNECT COUPLINGS

PART NUMBER INDEX ™

Part numbers listed below are base part numbers that exclude size designation, for complete part number refer to page referenced.

Part Number Page 150–22 ......................................................51 487 ............................................................56 5100 ..........................................................49 5100 ..........................................................51 5100–22 ....................................................51 5100–S2 ....................................................50 5100–S4 ....................................................50 5100–S5 ....................................................50 5100–S7 ....................................................51 5100–S9 ....................................................51 5101 ..........................................................50 5110 ..........................................................51 5110–S5 ....................................................50 5111 ..........................................................51 5400 ..........................................................52 5400–17 ....................................................56 5400–53 ....................................................56 5400–54 ....................................................56 5400–S2 ....................................................54 5400–S5 ....................................................54 5400–S6 ....................................................54 5400–S8 ....................................................54 5400–S16 ..................................................56 5400–S19 ..................................................56 5400–S20 ..................................................56 5401–S14 ..................................................56 5401–S17 ..................................................53 5410 ..........................................................53 5410–S14 ..................................................53 5410–S17 ..................................................53 5600 ..........................................................57 5600 ..........................................................58 5601 ..........................................................58 5602 ..........................................................58 5603 ..........................................................61 5606 ..........................................................60 5608 ..........................................................60 5610 ..........................................................60 5642 ..........................................................58 5643 ..........................................................58 5644 ..........................................................58 5650 ..........................................................59 5651 ..........................................................59 5657 ..........................................................61 5657 ..........................................................61 5657 ..........................................................65 5659 ..........................................................61 5659 ..........................................................61 5659 ..........................................................65 5667 ..........................................................61 5668 ..........................................................61 5690 ..........................................................61 5691 ..........................................................60 22008 ........................................................56 22546 ........................................................54 22546 ........................................................54 22546 ........................................................54 22546 ........................................................56 202208 ......................................................54 202208 ......................................................56 202220 ......................................................54 560078 ......................................................60 565006 ......................................................59 565007 ......................................................59 565014 ......................................................61 565015 ......................................................61

Part Number Page FD14 ..........................................................23 FD14-1001 ................................................24 FD14-1002 ................................................24 FD14-1004 ................................................24 FD14-1204 ................................................24 FD14-1206 ................................................24 FD14-1210 ................................................24 FD14-4002 ................................................24 FD14-4003 ................................................24 FD15 ..........................................................25 FD15–1000 ................................................26 FD15–1002 ................................................26 FD15–1025 ................................................26 FD15–1026 ................................................26 FD35 ..........................................................27 FD35–1000 ................................................28 FD35–1001 ................................................28 FD35–1002 ................................................28 FD35–1006 ................................................29 FD35–1007 ................................................28 FD35–1008 ................................................28 FD35–1042 ................................................29 FD35–1043 ................................................29 FD35–1044 ................................................29 FD40 ..........................................................17 FD40–1000 ................................................18 FD40–1001 ................................................18 FD40–1013 ................................................18 FD40–1013 ................................................22 FD40–1014 ................................................18 FD40–1014 ................................................22 FD41 ..........................................................19 FD41–1000 ................................................20 FD41–1013 ................................................20 FD41–1014 ................................................20 FD42 ..........................................................30 FD42–1000 ................................................31 FD42–1001 ................................................31 FD42–1002 ................................................31 FD42–1006 ................................................31 FD42–1008 ................................................31 FD42–1010 ................................................31 FD43 ..........................................................21 FD43–1001 ................................................22 FD43–1011 ................................................22 FD43–1031 ................................................22 FD45 Steel ................................................33 FD45 Brass ................................................37 FD45 Stainless Steel....................................40 FD45–1000 ................................................34 FD45–1001 ................................................41 FD45–1002 ................................................34 FD45–1002 ................................................34 FD45–1003 ................................................34 FD45–1004 ................................................41 FD45–1005 ................................................41 FD45–1040 ................................................36 FD45–1041 ................................................36 FD45–1044 ................................................35 FD45–1045 ................................................35 FD45–1046 ................................................35 FD45–1047 ................................................34 FD45–1052 ................................................42 FD45–1053 ................................................41 FD45–1056 ................................................42 FD45–1059 ................................................42

Part Number Page FD45–1061 ................................................34 FD45–1062 ................................................41 FD45–1063 ................................................34 FD45–1064 ................................................34 FD45–1065 ................................................34 FD45–1070 ................................................34 FD45–1071 ................................................34 FD45–1072 ................................................34 FD45–1075 ................................................41 FD45–1076 ................................................41 FD45–1078 ................................................41 FD45–1086 ................................................38 FD45–1090 ................................................38 FD45–1091 ................................................38 FD45–1092 ................................................38 FD45–1100 ................................................38 FD45–1101 ................................................38 FD45–1120 ................................................41 FD45–1121 ................................................41 FD45–1122 ................................................41 FD45–1142 ................................................41 FD45–1143 ................................................42 FD45–1153 ................................................38 FD45–1156 ................................................38 FD45–1157 ................................................38 FD45–1168 ................................................35 FD45–1169 ................................................35 FD45–1172 ................................................34 FD45–1173 ................................................35 FD45–1174 ................................................39 FD45–1175 ................................................38 FD45–1176 ................................................38 FD45–1177 ................................................39 FD45–1178 ................................................38 FD45–1179 ................................................39 FD45–1180 ................................................38 FD45–1194 ................................................42 FD45–1195 ................................................41 FD45–1197 ................................................42 FD45–1199 ................................................39 FD45–1201 ................................................39 FD45–1203 ................................................39 FD45–1206 ................................................35 FD45–1207 ................................................34 FD45–1209 ................................................42 FD45–1211 ................................................39 FD45–1228 ................................................45 FD45–1229 ................................................45 FD45–1237 ................................................35 FD45–1238 ................................................35 FD45–1267 ................................................43 FD45–1270 ................................................43 FD45–1399 ................................................38 FD45–1400 ................................................38 FD45–1411 ................................................43 FD45–1414 ................................................35 FD45–1415 ................................................35 FD45–1417 ................................................43 FD48 ..........................................................44 FD48–1000 ................................................45 FD48–1001 ................................................45 FD48–1002 ................................................45 FD48–1042 ................................................45 FD49 ..........................................................46 FD49–1001 ................................................47 FD49–1002 ................................................47

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

3

PART NUMBER INDEX

Part numbers listed below are base part numbers that exclude size designation, for complete part number refer to page referenced.

Part Number Page FD49–1004 ................................................47 FD49–1005 ................................................47 FD49–1014 ................................................48 FD49–1042 ................................................48 FD49–1057 ................................................47 FD49–1088 ................................................48 FD49–1200 ................................................48 FD56–1009 ................................................60 FD56–1012 ................................................60 FD56–1037 ................................................58 FD56–1062 ................................................58 FD56–1064 ................................................58 FD56–1065 ................................................58 FD56–1070 ................................................59 FD56–1071 ................................................59 FD56–1072 ................................................60 FD56–1074 ................................................60 FD56–1075 ................................................60 FD56–1081 ................................................61 FD56–1082 ................................................61 FD56–1123 ................................................59 FD56–1125 ................................................59 FD56–1196 ................................................59 FD56–1201 ................................................59 FD56–1204 ................................................58 FD56–1205 ................................................59 FD56–1207 ................................................58 FD56–1208 ................................................59 FD56–1209 ................................................60 FD56–1210 ................................................61 FD56–1221 ................................................60 FD56–1225 ................................................58 FD56–1226 ................................................59 FD56–1233 ................................................60 FD56–1234 ................................................61 FD56–1239 ................................................59 FD56–1270 ................................................61 FD69 ..........................................................62 FD69–1000 ................................................63 FD69–1001 ................................................63 FD69–1002 ................................................63 FD69–1010 ................................................63 FD69–1011 ................................................63 FD69–1012 ................................................63 FD69–1026 ................................................63 FD69–1027 ................................................63 FD69–1028 ................................................63 FD69–1029 ................................................63 FD70 ..........................................................68 FD70–1010 ................................................68 FD71 ..........................................................64 FD71–1001 ................................................65 FD72 ..........................................................66 FD72–1001 ................................................67 FD76 ..........................................................68 FD76–1002 ................................................68 FD76–1010 ................................................68 FD86 ..........................................................69 FD86–1001 ................................................71 FD86–1002 ................................................71 FD86–1004 ................................................71 FD86–1006 ................................................70 FD86–1008 ................................................70 FD86–1010 ................................................70 FD86–1016 ................................................71 FD86–1018 ................................................71

Part Number Page FD86–1035 ................................................71 FD86–1039 ................................................71 FD86–1040 ................................................71 FD86–1041 ................................................71 FD86–1042 ................................................70 FD86–1043 ................................................70 FD86–1044 ................................................70 FD86–1049 ................................................71 FD86–1050 ................................................71 FD86–1051 ................................................71 FD86–1052 ................................................70 FD86–1053 ................................................70 FD86–1054 ................................................70 FD89 ..........................................................72 FD89–1001 ................................................74 FD89–1002 ................................................74 FD89–1004 ................................................75 FD89–1005 ................................................75 FD89–1006 ................................................74 FD89–1007 ................................................74 FD89–1008 ................................................76 FD89–1009 ................................................76 FD90 ..........................................................76 FD90–1004 ................................................77 FD90–1012 ................................................77 FD90–1021 ................................................77 FD90–1034 ................................................77 FD90–1035 ................................................77 FD90–1040 ................................................77 FD90–1041 ................................................77 FD90–1044 ................................................77 FD90–1045 ................................................77 FD90–1046 ................................................77 FD90–1061 ................................................78 FD90–1090 ................................................78 FD90–1206 ................................................78 FD90–1047 ................................................77 FF013 ........................................................35 FF014 ........................................................35 FF015 ........................................................35 FF016 ........................................................38 FF017 ........................................................38 FF018 ........................................................38 FF054 ........................................................41 FF055 ........................................................41 FF056 ........................................................41 FF082 ........................................................58 FF092 ........................................................58 FF093 ........................................................58 FF098 ........................................................50 FF1607 ......................................................32 FF10166 ....................................................64 FF10173 ....................................................29 FF10174 ....................................................29 FF10175 ....................................................29 FF10593 ....................................................71 FF10594 ....................................................71 FF10595 ....................................................71 FF10596 ....................................................71 FF10597 ....................................................71 FF10598 ....................................................71

QUICK DISCONNECT COUPLINGS

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

4

QUICK DISCONNECT COUPLINGS

INDUSTRY APPLICATION SYMBOLS ™

Industry Application Symbols Industry symbols are provided for each coupling indicating where it is typically used. But remember, a coupling can be used in any industry, provided it meets the established application requirements.

Marine and Defense FD14, FD15, FD35, FD45 (stainless) FD45 (brass), 5100, 5400, 5600, FD69, FD86, FD90

Electronic Cooling

Agriculture FD14, FD48, FD70, FD76,

Pharmaceutical/Medical FD45 (stainless), FD45 (brass), 5100, 5400

FD42, 5400, 5600, FD71, FD72, FD90

Food & Beverage

Chemical Processing

Industrial Plants FD15, FD45 (stainless)

FD45, FD49, 5100 5400

FD14, FD15, FD35, FD40, FD41, FD42, FD43, FD45 (steel), FD48, FD49, 5100, 5400, 5600, FD69, FD86, FD89, FD90

FD15, FD35, FD45 (stainless), FD45 (brass), 5100, 5600, FD86, FD90

FD14, FD15, FD42, FD45 (steel), FD45 (brass), 5100, 5400, 5600, FD90

FD14, FD15, 5600, FD86, FD89

Maintenance & Repair Operations

Oil and Gas

FD14, FD35, FD40, FD41, FD43, FD45 (steel), FD45 (brass), FD45 (stainless), FD48, FD49, 5100, 5600, FD69, FD86, FD89, FD90

Transportation

Forestry

Construction

FD15, FD45 (brass), FD45 (stainless), 5400

FD14, FD40, FD41, FD43, FD45 (steel), FD45 (brass), FD49, 5100, 5600, FD69, FD90

Utility FD14, FD15, FD35, FD45 (steel), FD49, 5100, 5600, FD86, FD89, FD90

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

5

CONFIGURATION INDEX

AIR COUPLINGS

FD40 Series – page 17 MIL-C-4109 Interchange— Automatic Sleeve

FLUID TRANSFER and HYDRAULIC

5600 Series – page 57 General Purpose Industrial Interchange ISO 7241/1 Series A

FLUID TRANSFER and REFRIGERANT

5400 Series – page 52 Low Spill—Low Air Inclusion

SPECIAL APPLICATION

FD41 Series – page 19 ARO-210 Interchange

FD45 Series Steel…page 33 Brass…page 37 Stainless Steel…page 40 Industrial Interchange ISO 7241/1 Series B

FD43 Series – page 21 MIL-C-4109 Interchange— Manual Sleeve

5100 Series – page 49 Thread Together—Low Spill

FD69 Series – page 62 Water Blast “Arc Latch™”

FD90 Series – page 76 Diagnostic SAE J1502 Interchange

HYDRAULIC—FARM

QUICK DISCONNECT COUPLINGS

FD86 Series – page 69 5000 psi High Impulse—DryBreak FD71 Series – page 64 Push to Connect ISO Interchange FD49 Series – page 46 Flush Face—No Spill HTMA Interchange

FD72 Series – page 66 Push to Connect Connect Under Pressure—Male ISO Interchange

FD14 Series – page 23 Drain Coupling

FD35 Series – page 27 High Pressure—“Arc Latch™”

Male Tips

FD15 Series – page 25 Oil Sampling Valve FD42 Series – page 30 Pioneer 4000-2 Interchange

FD70 Series – page 68 Deere Interchange FD48 Series – page 44 Bruning SM-250 Interchange

FD76 Series – page 68 ISO Standard FD89 Series – page 72 ISO 16028 Interchange

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

6

QUICK DISCONNECT COUPLINGS

HOW TO ORDER ™

How to Order Eaton quick disconnect couplings can generally be ordered as a complete assembly or as separate halves. Couplings ordered by complete assembly part numbers will be supplied by halves. For special packaging, contact Eaton. (The FD14, FD40, FD41, FD43, FD86, FD89 and FD90 series are ordered by halves only.) Standard coupling part numbers are described below: 5601-8-10 S Coupling series and body style Port or thread size* Nominal coupling size* Material (steel) FD45-1002-06-06

Construction

Coupling series Coupling half and material designation Port or thread size* Nominal coupling size* *Size designations are represented in 16ths of an inch, i.e., 06 = 6/16 or 3/8 inch

Dimensions Dimensions in this catalog are for reference only. Actual dimensions may vary from those shown.

Coupling Identification Generally, the coupling series or complete part number will be stenciled on the coupling body.

Caution: The user should observe carefully the precautions listed in this catalog. These include selection of seals and body materials for fluid compatibility and recommendations on the selection of quick disconnect couplings. In addition, care should be taken not to exceed the maximum operating pressures listed for each coupling size and type shown in the physical characteristics table for each coupling. Because of possible variations in machining tolerances, quality control, inspection and quality assurance, Eaton coupling halves should not be used with coupling halves supplied by other manufacturers except where such use is approved for a particular coupling as noted in this catalog.

Electronic Cooling

For Technical Assistance Contact: Eaton, Hydraulics 14615 Lone Oak Road Eden Prairie, MN 55344 Phone: 952 937-9800, FAX: 952 974-7722

Forestry This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

7

SAFETY INFORMATION

Safety Information for Eaton Coupling and Swivel Products 1.0 General Instructions 1.1 Scope. The scope of this safety bulletin is to warn against improper selection, use, installation, etc. of Eaton coupling/swivel products. 1.2 Distribution. A copy of this safety bulletin should be distributed to all individuals responsible for using and/or selecting Eaton coupling/swivel products. 1.3 Fail-Safe. Design all systems and equipment for failsafe operation such that failure of any component does not result in personal injury and/or property damage. 1.4 User Responsibility. It is the sole responsibility of the user to select and determine that the Eaton product is compatible with the end use application. The user is responsible for reading and following this safety bulletin as well as any instructions or literature on the Eaton product being used. The user must provide necessary product warnings for Eaton couplings/swivel products, used with systems or equipment, to the operators of the systems or equipment. 1.5 Usage with other Manufacturers’ Products. When using Eaton coupling/swivel products with other manufacturers’ adapters, hoses, etc., do not exceed the lowest pressure rating of any of the components being used or rupture may result. 2.0 Selection of Eaton Couplings/Swivels. 2.1 Pressure. Ensure that the maximum operating pressure of the system or equipment does not exceed the rated operating pressure of the Eaton coupling/swivel product or rupture may result. 2.2 Fluid compatibility. Verify that all components (seals, metals, etc.) are compatible with the fluid being conveyed. Failure to do so may result in high speed fluid discharge and/or leakage of fluids which may be flammable, toxic, at extreme temperatures, or otherwise harmful. 2.3 Temperature. Ensure that the maximum operating temperature of the system or equipment does not exceed the rated operating temperature of the Eaton coupling/swivel product (including seals) or rupture may result. 2.4 Coupling/Swivel Size. Use properly sized couplings/ swivels such that there is not a large pressure drop across them thus avoiding system damage due to excessive heat generation or failure of internal components. 2.5 Sleeve Lock. Use sleeve locks or threaded couplings where there is the possibility of accidental disconnection. Failure to utilize sleeve locks or threaded couplings in these applications may result in hose whip, expelled components, high speed fluid discharge, system damage, or leakage of fluids which may be flammable, toxic, at extreme temperatures, or otherwise harmful. 2.6 Connect or Disconnect Under Pressure. If connection and/or disconnection of couplings under pressure is a requirement, only use couplings designed for connection/disconnection under pressure. Failure to utilize this type of coupling in that application may result in hose whip, expelled components, high speed fluid discharge, and/or system damage. Be certain not to confuse the rated operating pressure with the rated connect/disconnect under pressure.

2.7 Environment. Ensure that Eaton couplings/swivels are compatible with the surrounding environment. The surrounding environment may be heat, salt water, moisture, chemicals, and the like. Failure to protect against an adverse environment may cause system damage, premature failure, and/or leakage of fluids which may be flammable, toxic, at extreme temperatures, or otherwise harmful. 2.8 External Loads. Avoid any external loads such as side loads, tensile loads, vibration, etc. Failure to do so may result in accidental disconnection, premature failure, system damage, and/or leakage of fluids which may be flammable, toxic, at extreme temperatures, or otherwise harmful. 2.9 Welding & Brazing. Extreme heating of plated products above +450°F (+232°C) such as welding, brazing, baking, etc., where the plating is burned off, may result in the release of deadly gases. 3.0 Installation of Eaton Coupling & Swivel Products. 3.1 Inspection of Product. Prior to installation, ensure that the Eaton product meets all of the requirements of the system and/or equipment it is to be used on. Ensure you have the correct part number, function test the coupling by connecting it with a mating half, and function test the swivel by rotating the sleeve. The function test should result in smooth, non-binding operation or premature failure may result. 3.2 Cleanliness. Use end caps and plugs to reduce the risk of system contamination or damage to critical sealing surfaces. Failure to do so may result in leakage of fluids which may be flammable, toxic, at extreme temperatures, or otherwise harmful. Caps and plugs are not a secondary seal unless explicitly noted. 3.3 Location. Place Eaton couplings and swivels in a safe location such as not to expose the user to personal injury (slippage, tripping, falling, etc.) during installation, connection, disconnection and maintenance. 4.0 Product Maintenance. A maintenance schedule should be put in place to ensure that Eaton couplings and swivels are functioning properly. 4.1 Inspection. Visually inspect to ensure that there is NO leakage, cracked components, corrosion build-up, contamination build-up, wear, etc. If any abnormality is encountered, the coupling or swivel should be replaced immediately.

QUICK DISCONNECT COUPLINGS

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

8

QUICK DISCONNECT COUPLINGS

COUPLING CONSTRUCTION ™

Quick Disconnect Couplings

I. Types of Valves

Quick disconnect couplings are connecting devices which permit easy, immediate connection and separation of fluid lines. When installed in a fluid system, quick disconnect couplings save time by eliminating system bleeding, recharging and purging of air whenever an accessory is being replaced. Dependability is assured because the coupling valves automatically open and close and because the possibility of air, dirt, and moisture being trapped in the system is minimized. Eaton quick disconnect couplings may be used in systems to help align components and the swivel feature helps prevent twisting of hose assemblies. However, they are not intended to be used as swivel joints in applications subjected to constant rotation. Eaton swivel joints should be used in these applications. See document E-MESW-MC001-E.

Double Poppet Valves – Most Common FD14, FD35, FD42, FD45, FD48, 5600, FD71, FD72, FD76

Selection of Quick Disconnect Couplings See selection chart on pages 13 and 14. The following questions should be answered before selecting or specifying a quick disconnect coupling. 1. What are the functional requirements of the coupling? 2. To what pressures will the coupling be subjected? 3. What are the flow requirements of the coupling? 4. What is the maximum acceptable pressure drop at specified flow rate? 5. Is the coupling to be connected or disconnected under pressure? How much pressure? Which half? 6. What metals are compatible with the fluid in the system? 7. What seals are compatible with the system’s fluid? 8. Are minimum air inclusion or fluid loss upon connection and disconnection critical to the proper operation of the system? 9. What threads and end configurations are necessary? 10. Is bulkhead flange or frame mounting necessary? 11. Should the coupling be interchangeable with other couplings presently in use?

loaded poppet valves in each half immediately • Spring self-seal both halves upon disconnection. Cavity between halves allows some air inclusion when • connecting and some fluid loss upon disconnection. • Durable and economical.

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

9

COUPLING CONSTRUCTION

Tubular Valve and Sleeve – Poppet FD49, 5100, 5400, FD86, FD89, FD90

Valved – One Side FD40, FD41, FD43, FD45, 5600

(FD45 & 5600 only)

• Immediate self-sealing in valved half only. • Either male or female half can be valved. • Full flow in non-valved half upon disconnection. NOTE: A “Pusher” poppet is needed in non-valved half to open poppet in valved half except for FD40, FD41 and FD43.

No Valves FD45, 5600, FD69

• • •

Full flow when connected and disconnected. Minimum pressure drop. Maximum flow.

QUICK DISCONNECT COUPLINGS

• Precision valving for low air inclusion and fluid loss. loaded sleeve provides access to tubular valve • Spring ports. • Poppet valve in opposing half self seals. cavity between halves to cause spillage or air • No inclusion.

Ball Bearing Valve FD70

• Spring loaded ball bearing. • Durable and economical. • Not recommended for vacuum. • Metal-to-metal seal.

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

10

QUICK DISCONNECT COUPLINGS

COUPLING CONSTRUCTION ™

II. Types of Latches “Arc Latch™” Connections FD35, FD69

Threaded Connections 5100, 5400, FD86

• • •

Uses mechanical advantage of threads to connect or disconnect under pressure. Greater holding power under impulsing and vibration. Union nuts may be wing or hex type.

Ball Latch Connections FD14, FD40, FD42, FD43, FD45, FD48, FD49, 5600 (FD56), FD71, FD72, FD89, FD90

• • • •

Exclusive Eaton design. Series of arcs in female half, lock into recess on male half (same as ball latch). Greater surface contact area gives tremendous holding strength. For high pressure applications.

Bar/Pin Latch Connections FD41

• • • • •

Series of balls on female half, lock into recess on male half. Allows for 360° swiveling (not intended for constant swiveling). Quick and easy to connect and disconnect. Can be used as an emergency breakaway when female sleeve is frame mounted. Most popular and economical latching design.

• • • •

Two bar/pins in female half lock into recess on male half. Allows for 360° swiveling (not intended for constant swiveling). Design allows for push to connect operation. Typically used for low pressure applications.

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

11

COUPLING CONSTRUCTION

Latching Methods—(How To) Push-to-Connect

Thread-to-Connect 5100, 5400, FD86

FD14, FD40, FD41, FD49, FD89, FD90, (FD71, FD72 when female half is frame mounted)

To Connect

• • • • •

Relieve system pressure. Insert and push male half into female half. Release sleeve on female half will connect automatically. Only one hand is required. FD71, FD72, only—to obtain push-to-connect female half must be frame mounted. (Ref. 5603 breakaway frame.) Female half end port must be connected to a 12” minimum length of flexible hose for full female body motion.

• • • •

5100 Series

Relieve system pressure. Manually retract release sleeve on female half and remove male half. FD71, FD72 only—female half must be frame mounted and will automatically disconnect when male half is pulled out. This requires a slightly higher force to disconnect.

Retract (Sleeve) To-Connect FD35, FD42, FD43, FD45, FD48, 5600 (FD56), FD69

Tighten until halves bottom out and connection indicator groove is no longer visible.

FD86 Series

To Disconnect

• • •

Prevent male from rotating. Insert male into union nut on female body assembly. Rotate union nut clockwise. – With hand if wing nut type. – With wrench if hex nut type. Tighten as follows.

Tighten until halves bottom out and connection indicator O-Ring is no longer visible.

5400 Series

QUICK DISCONNECT COUPLINGS

Recommended torque values for S2 half to S5 half are listed below. Dash Size

Torque – ft. lbs.

–4 –8 –12 –16

10–12 35–37 45–47 65–67

To Connect

• • • •

Relieve system pressure. Pull back and hold release sleeve on female half. Insert male half. Let go of release sleeve on female half.

To Disconnect

• • • •

Relieve system pressure. Pull back and hold release sleeve on female half. Remove male half. Let go of release sleeve on female half.

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

12

QUICK DISCONNECT COUPLINGS

COUPLING SELECTION CHART ™

Below is a capability selection chart to aid you in locating the proper coupling to meet your requirements. This chart should be used in conjunction with the fluid compatibility charts on pages 15 and 16 and the appropriate product pages. This information is intended as a guide only and final selection is further dependent on fluid and ambient temperature, concentration of agent, intermittent or continuous exposure, etc.

For further details on a specific coupling, see the appropriate catalog pages. Where dash sizes appear in the chart below, the coupling is available only in those sizes. The check marks () in the chart below indicate product is normally available in either final assembly and/or component form. Contact Eaton for availability of products without a check mark.

FD45

Function

Maximum Operating Pressure (psi connected)

Vacuum (in./Hg.) Choice of Seals (other seal compounds available upon request)

Nominal Coupling Size (inches) 1/ 8 1/ 4 3/ 8 1/ 2 1/ 2 3/ 4

1 11/4 11/2 2

Dash Size

–2 –4 –6 –8 –8–10 –12 –16 –20 –24 –32

Buna-N Neoprene EPR Viton No-spill valving Double valve Valve Options Valved male only Valved female only Straight thru – no valves Steel Basic Material Brass Stainless Steel Aluminum Polypropylene “Arc latch™” Ball latch Latch Style Bar Pin latch Threaded Female pipe Male pipe Fem. st. thd. O-ring Male st. thd. O-ring End Connections SAE 37° (JIC) male Metric male O-ring Braze Hose barb Female BSP Bulkhead Mounting Method Flange Frame Connect Under Pressure Caps/Plugs Full Field Service Push to Connect (Automatic Sleeve) Interchangeable with Other Brands

FD14 Pg. 23

FD15 Pg. 25

FD35 Pg. 27

50/300 50

28 

10000

28 

28

FD40 Pg. 17

300 300 300

28 

FD41 Pg. 19

FD42 Pg. 30

FD43 Pg. 21

300

3000

300 300 300

28 

28 

Steel Pg. 33

Brass Pg. 37

SS Pg. 40

4500 5000 4000

1000 1000 1000

4000 4000 4000

1000 1000 1000 1000

1500 1500 1250

28 

28 

28 

 

 

 

    

   

   

3000 1500

FD48 Pg. 45

3000

28 

  



 N/A N/A N/A N/A N/A 





 







 





  

 

















 









 

 

 











  









 

 





  

 



 

 

 

 

 





This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

13

COUPLING SELECTION CHART

Function

Maximum Operating Pressure (psi connected)

Nominal Coupling Size (inches)

Dash Size

1/ 8 1/ 4 3/ 8 1/ 2 1/ 2 3/ 4

–2 –4 –6 –8 –8–10 –12 –16 –20 –24 –32

1 11/4 11/2 2

Vacuum (in./Hg.) Buna-N Neoprene EPR Viton No spill valving Double valve Valve Options Valved male only Valved female only Straight thru – no valves Steel Brass Basic Material Stainless Steel Aluminum Polypropylene “Arc latch™” Ball latch Latch Style Bar Pin latch Threaded Female pipe Male pipe Fem. st. thd. O-ring Male st. thd. O-ring End Connections SAE 37° (JIC) male Metric male O-ring Braze Hose barb Female BSP Bulkhead Mounting Flange Method Frame Connect Under Pressure Caps/Plugs Full Field Service Push to Connect (Automatic Sleeve) Interchangeable with Other Brands Choice of Seals (other seal compounds available upon request)

FD49 Pg. 46

5100 Pg. 49

5400 Pg. 52

5600 Pg. 57

3000* 3000* 3000*

3000*

3000

5000 4000

1750*

3000* 3000* 2750* 2500*

700* 700*

28 

28 

28

 

   

FD69 Pg. 62

FD71 Pg. 64

FD72 Pg. 66

FD86 Pg. 69

10000 4000 4000 4000

3000

3000 5000 5000

28 

28 

       

  

28 

28 

28 

FD89 PG. 72

FD90 Pg. 76

4350 4350 3625 3625 3625 3625 3625 2900 2900 28 

7000

28 





 



 

 

 

 































 







     

QUICK DISCONNECT COUPLINGS

 

 



  

 

 



   









 500    

 

500  

  

 –8 –10  







 

  

 

 



750  



500 

 

 

*Not recommended for continuous hydraulic impulse applications at maximum operating pressure.

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

14

SEAL ELASTOMER DATA Application Specification

Seal Elastomer Buna-N

none

Neoprene

none

EPR (Ethylene Propylene Rubber) Viton

none

Max. Operating Temperature Range –40°F (–40°C –65°F (–54°C –65°F (–54°C –15°F (–29°C

MIL-R-25897

to to to to to to to to

+250°F +121°C) +300°F +149°C) +300°F +149°C) +400°F +204°C)

E C U U U U U U U E G U E E E E E E

E C E C G E G U G E E G E E E E E E

U E U U E E C C E E E E G U U U C C

Monel

E G U U E E U C E E E E U U U U U U

Aluminum

Brass

U U G U U U U E E E E E E E E E E E

SEALS

E U U U U U U U U E G U E E E E E E

Cres

Steel

EPR/EPDM

Viton

FLUID Acetaldehyde Acetic Acid, 10% Acetic Acid, Glacial Acetone Acetophenone Acetyl Acetone Acetyl Chloride Acetylene Air, Hot (Up to +160°F) Air, Hot (161°F – 200°F) Air, Hot (201°F – 300°F) Air Wet Aluminum Chloride Aluminum Fluoride Aluminum Nitrate Aluminum Sulfate Alums Ammonia, Cold

Neoprene

E = EXCELLENT G = GOOD C = CONDITIONAL U = UNSATISFACTORY

Buna-N

NOTE: This chart does not apply to bonded seals used in the 5100 and FD86 Series Couplings. Consult Eaton for special applications.

METAL

E E C C E E C C E E E E E U U C E E

E E C C E C C U E E E E E U E C C C

E E U C E E C E E E E E E U C C C C

Ammonia, Hot Ammonia, Anhydrous Ammonia, Aqueous Ammonium Carbonate Ammonium Chloride Ammonium Hydroxide Ammonium Nitrate Ammonium Phosphate Ammonium Sulfate/Sulfide Amyl Acetate Amyl Alcohol Aniline, Aniline Oil Aniline Dyes Arsenic Acid Asphalt ASTM #1 ASTM #2 ASTM #3 Automatic Trans. Fluid Barium Chloride Barium Hydroxide Barium Sulfide Benzene, Benzol Benzin Benzoic Acid Benzyl Alcohol Black Sulfate Liquor Blast Furnace Gas Borax Boric Acid Bromine Butane Butyl Acetate Butyl Alcohol Butyl Cellosolve Butylene Butyl Stearate Butyraldhyde Calcium Acetate Calcium Bisulfate Calcium Chloride Calcium Hydroxide Calcium Hypochlorite Calcium Nitrate Cane Sugar Liquors Carbitol Carbolic Acid Carbonic Acid Carbon Dioxide Carbon Disulfide Carbon Monoxide Carbon Tetrachloride Castor Oil Cellosolve Acetate China Wood Oil (Tung Oil) Chlorine Chloracetic Acid Chloroacetone Chlorobenzene Chloroform Chlorophenol Chlorosulfonic Acid Chrome Plating Solution Chromic Acid Citric Acid Coke Oven Gas Copper Chloride Copper Cyanide Copper Sulfate Cotton Seed Oil Creosote (Coal Tar) Crude Oil Cyclohexanol Cyclohexanone Detergent/Water Solution Diacetone Alcohol (Acetol) Dibenzyl Ether Diesel Oil Diethylamine Dowtherm A&E Dowtherm 209 Ethyl Alcohol (Ethanol) Ethyl Acetate Ethyl Benzene Ethyl Cellulose Ethyl Chloride

G E E E E C G E E U G U G E C E G G G E E E U U U G C U G G U E U E U U U U G E E E U E E G U E G U G U E U G U U U U U U U U U E U E E E G C G G U E U U C G U G E U U G U

G E E E E E E E E G E G G E U C U U U E E E U U U G C U E G U U G G G U U G E U E E E E E G G E E U E U G G U U G E U U U U G C E U E E E C U U U G E E G U G U E E G U G U

U U U U U U U C U E G U C U G E E E E G U U E E G G C C E G C E E G E E G E G C G G G G G E E C E G E G E U G C U G G G G U U U C C U U C E C U E E E E G E U U – E E G G E

Monel

E E E C U G G U U E G E U U E E E E E U G C G E U E E E E U U E E G E E G E G U G G U G E E U U E G E U E U E C U G G G C G C C C E U E U E E G E E G E G E E G – E E E E E

Aluminum

U U U U U C U _ U U G U G E E E E E E E E E E E E E E E E E E E U E U E E U U E E E E E E G E E E E E E E U E G U U G E E U E E E E E E E E E E E U E U U E U E U E U E U E

SEALS

U E E U E C E E E U G U U E G E E E E E E E U E U U C U G G U E U E U C G U G E E E U E E G U G G U G U E U G U U U U U U U U U E U E E E E G E E U E U U E G U C E U U G U

Cres

Brass

RESISTANCE RATING KEY E = Excellent – Fluid has little or no effect. G= Good – Fluid has minor to moderate effect. C = Conditional – Service conditions should be described to Eaton for determination of suitability for application. U=UNSATISFACTORY The differences between ratings “E” and “G” are relative. Both indicate satisfactory service. Where there is a choice, the materials rated “E” may be expected to give better or longer service than those rated “G”.

FLUID

Steel

HOW TO USE THE CHART 1. Both the elastomer and the metal must be considered when determining suitability of a combination for a coupling. 2. Locate the fluid to be conveyed and determine the suitability of the elastomeric and metal components according to the resistance ratings shown for each. 3. Dimensional and operation specifications for each coupling can be found on the catalog pages. 4. Information on seal options for couplings, and how to specify them, are shown in the respective sections of this catalog. 5. Be sure to check the table below for maximum operating temperature range of the elastomer for desired temperature. 6. For further details on the products shown in this catalog, and their applications, consult your Eaton Sales Representative or Eaton Technical Support. 7. Coupling component materials may differ from body material. Refer to specific catalog pages.

E = EXCELLENT G = GOOD C = CONDITIONAL U = UNSATISFACTORY

Viton

This chart indicates the suitability of various elastomers and metals for use with fluids to be conveyed. It is intended for use with Eaton couplings and should not be used to determine compatibility for other products. It is intended as a guide only and is not a guarantee. Final selection of the proper seal or material of metal components is further dependent on many factors including pressure, fluid and ambient temperature, concentration, duration of exposure, etc.

EPR/EPDM

FLUID COMPATIBILITY

Neoprene

Buna-N

QUICK DISCONNECT COUPLINGS

FLUID COMPATIBILITY

METAL

E E E C C C G G G E E E G G E E E E E C G G E E G E E E E C U E E G E E G E G C G G C G E E E E E G E G E E E C U G G G G G U U C E U G G E E G E E E E G E E E – E E G G E

E E E C U C G U U E U G C U C E E E E G U U G E G G U U G C C E E G E E G E C U C U U G E E – G E E E U E G E C U U G G U G U U C U U U U E E U C C E E G E – E – G E G G G

E E E C C U U G G E G G G C E E E E E G G U E E G G U U – C C E E G E E G G G U G G U G E E – E E G E E E E E C G G G G G C U U C U U G G E E U E E E E G E E E – E E E G G

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

15

FLUID COMPATIBILITY

G G E U U

U U E G U

E E E C C

E C E E E

E E E E E

E E E E E

E G G E E

E E E E E

E E U U C U G E G U U E U G G E E U

U E U U C U G E G G U G U G U U U U

U E E G E C E E G E G U G E U U U U

E E E E E U E E E U E E U E U E E U

E E E U E U U E U E G E E E G E E U

E E U U E U U E U G – E – E G E E E

E E E U G U U E G G G E E E G E E E

E E E U E U U E E G – E E G – E E E

E E U U G C U E U G – E E E – E E E

E E

G G

U U

E E

E E

E E

E E

E E

E E

E G E U U G E E G G U U U U U U U E E E G G E E E C U C E C E E U U U E E

E G E U U G E E G U U U U U U U U G G E U U G E G U U U E C G E U U U E E

E E E U U U E E E U U E E U U U C U U U U U U U U U U U U E E E U U U E E

E E E E E G E E U E E U U G U U U E E E E E E E E E E E E G E E E G G E E

E E E E G U U E G E E E G G G G E E E E G E E E G – E

C G E G U – U U G E E E G G G G G E E E G E E E E – G G G C U G U U G E E

C E E G E E U E E G E E G G G G G E E E E E E E E – E E G E G G E E E E E

G G E G G G U U G U U – G G G G E – E – – E – – E – G G G G U U U C E E E

G G E G E E U G E E G E G G G G G E E E – E E E E – G G G E G G U U E E E

G G U U U U E E E

U U

C U

G E

C G

E U

G G

C U

G U

E U G – E U E U U U U G E E E G

G U G – G U E U U U U G E E E G

U U E – G U U U G G E E E E E E

E E E – E E E E E E E U E E E G

E G U G G G G C U U C C E C C G

E G C G – G G G E E U G C U C G

E G C G E G G G E E C C E G C G

E G C G G G E G E C E U U U C U

E G C G G G G E G E E G G C C E

C

C

E

U

G

G

G

U

E

E E C U E U G G U C E E G E E E E E U

E E – U E U E E E E E E G E E E E E G

E E – G E U C C C C E E E E E E E E E

E E – U E E E E U U E E U E E E E E E

G – E E E E E E E E G E E G E E U E C

G – E – E E E E E E G E E G E G C – G

E – E E E E E E E E G E G E E E C C C

G – E E E E E E E E G U E G G U E U U

– – E E E E E E E E G E E E – E U C

U

U

G

E

C

C

C

U

C

C E G G G E E E E G E E U G E U U U U U U C E G E G C U U U U G G G U E E U U E E

C E G G G E E E E E G G U G G U E U U U U C E U G G U U U U G G U U U E E U U E E

E E E E E E E E E E U E E G U U E U G G U U E U G G U U U E E U U U U E E U U E E

C E – E E E E E E E E E C E E G E E E E G U E E E E E E E G U E E E E E E G E E E

U E E C U U E G C U E U E C E E E G E G C U E E U G E E E E E E G E E C C C E E U

U G C U U E E G U U E U E C E E U – G C C C E G C G U E G – U G G G U G G G E U C

U G E C C G E G C C E U E E E E G G G G U C E E C G G E E C E E G E C E E E E U G

U U E U C U E G U G E U G C E E E G E G U C C E E G U E E – E E G E E G G G E C C

C G E C C E E G G G E U E E E E E U G G C U E E E E G E E G E E G E E E E E E G G

SEALS

Monel

E E E U U

U U

FLUID Oleic Acid Oleum (Fuming Sulfuric Acid) Oleum (Mineral Spirits) Ortho-Dichlorobenzene Oxalic Acid Oxygen Palmitic Acid Para-Dichlorobenzene Pentane Perchloroethylene Phenol (Carbolic Acid) Phosphoric Acid Phosphorous Trichloride Potassium Acetate Potassium Chloride Potassium Cyanide Potassium Dichromate Potassium Hydroxide, to 10% Potassium Hydroxide, over 10% Potassium Nitrate Potassium Sulfate Propane Propyl Acetate Propyl Alcohol Propylene Refrigerant R-12 Refrigerant R-13 Refrigerant R-22 Refrigerant R-134a Sewage Soap (Water Solutions) Sodium Acetate Sodium Bicarbonate Sodium Borate Sodium Carbonate Sodium Chloride Sodium Cyanide Sodium Hydroxide, to 10% Sodium Hydroxide, over 10% Sodium Hypochlorite Sodium Metaphosphate Sodium Nitrate Sodium Perborate Sodium Peroxide Sodium Phosphates Sodium Silicate Sodium Sulfate Sodium Sulfide Sodium Thiosulfate Soy Bean Oil Stannic Chloride Steam (up to 300°F) Stearic Acid Stoddard Solvent Styrene Sulfur Sulfur Chloride Sulfur Dioxide Sulfur Trioxide Sulfuric Acid, over 10% Sulfurous Acid Tannic Acid Tar (Bituminous) Tartaric Acid Tertiary Butyl Alcohol Titanium Tetrachloride Toluene (Toluol) Trichlorethylene Tricresyl Phosphate Trianthanolamine Tung Oil Turpentine Varnish Vinyl Chloride Water (to +150°F) Water (+151°F to +200°F) Water (+201°F to +250°F) Xylene Zinc Chloride Zinc Sulfate

Aluminum

G E U U U G C E G G E E E U E E G E

Cres

G E U U U G C E G C E G E U E E E E

Brass

G E U G E E C E G G E E E E E E E E

METAL

Steel

C G U U U E C E G – E E G U E E G E

Viton

G E U U U E U E G U E E E U E E G E

EPR/EPDM

G E E E E G U E U E E E E E E E U E

Neoprene

U E E E G G E U G G U U E E E U G U

SEALS

E = EXCELLENT G = GOOD C = CONDITIONAL U = UNSATISFACTORY

Buna-N

Monel

Brass

Aluminum

Steel

U E G E G C G G C G C G E G E G G G

Cres

Viton

EPR/EPDM

U E E E G C C E C G E G E G E E U E

FLUID Ethylene Dichloride Ethylene Glycol Ferric Chloride Ferric Nitrate Ferric Sulfate Formaldehyde Formic Acid Fuel Oil Furfural Gallic Acid Gasoline Gasohol Glycerine/Glycerol Green Sulfate Liquor Helium Heptane Hexaldehyde Hexane Hydraulic Oils Straight Petroleum Water Petroleum Emulsion Water Glycol Straight Phosphate Ester Phos. Ester/ Petroleum Blend Ester Blend Silicone Oils Hydrobromic Acid Hydrochloric Acid Hydrocyanic Acid Hydrofluoric Acid Hydrofluorosilic Acid Hydrogen Hydrogen Peroxide Hydrogen Sulfide, Dry Isocyanate Iso Octane Isopropyl Acetate Isopropyl Alcohol Isopropyl Ether JP-4, JP-5 Kerosene Lacquer/Lacquer Solvents Lime Sulfur Linseed Oil LPG Lubricating Oils Magnesium Chloride Magnesium Hydroxide Magnesium Sulfate Maleic Acid Maleic Anhydride Malic Acid Mercuric Chloride Mercury Methanol Methyl Bromide Methyl Chloride Methyl Butyl Ketone Methyl Ethyl Ketone Methylene Chloride Methyl Isobutyl Ketone Methyl Isopropyl Ketone Methyl Salicylate MIL-L-2104 MIL-D-5606 MIL-H-6083 MIL-L-7808 MIL-L-23699 MIL-H-46170 MIL-H-83282 Mineral Oils Naphtha Naphthalene Naphthenic Acid Natural Gas Nickel Acetate Nickel Chloride Nickel Sulfate Nitric Acid, to 10% Nitric Acid, over 10% Nitrobenzene Nitrogen Octyl Alcohol

Neoprene

Buna-N

E = EXCELLENT G = GOOD C = CONDITIONAL U = UNSATISFACTORY

METAL

QUICK DISCONNECT COUPLINGS

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

16

QUICK DISCONNECT COUPLINGS

AIR ™

FD40 Series/MIL-C-4109 Industrial Interchange – Air

The FD40 Series offers a one-hand push-to-connect latch ideal for compressed air service. The female half features self-sealing poppet valves, preventing air loss while disconnected. Male half uses straight through design.

Automatic sleeve for one-hand push-to-connect operation.

Protective collar to prevent accidental snagging and disconnection.

Meet dimensional requirements of MIL-C-4109 for industrial interchangeability.

• • • •

Swivels 360°, eliminating hose kinking.

Flow Data

Ball latching mechanism. Standard seal material – Buna-N. Standard body material – Zinc plated steel.

Physical Characteristics Coupling Size

-04 -06 -08

Maximum Mininum Burst Pressure (psi) Operating Vacuum Pressure Female (in./Hg.) (psi) Half Only Connected Connected Only

300 300 300

3000 3000 2000

8000 8000 8000

28 28 28

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

17

AIR

FD40 Series Female Half Female Pipe/Valved

Coupling Thread Dimensional Data 1 Size Size(P) A B

Part Number Buna-N

Line Ref.

–04

1/ -18 4

1.88

1.00

.81

FD40–1000–04–04

2

–04

3/ -18 8

2.56

1.00

.94

FD40–1000–06–04

3

–06

1/ -18 4

2.63

1.16

.94

FD40–1000–04–06

4

–06

3/ -18 8

2.13

1.16

.94

FD40–1000–06–06

5

–08

1/ -14 2

2.38

1.28 1.06

FD40–1000–08–08

6 7 7 8

Female Half Male Pipe/Valved

–04

1/ -18 4

2.63

1.00

.81

FD40–1001–04–04

9

–04

3/ -18 8

2.63

1.00

.81

FD40–1001–06–04

10

–06

3/ -18 8

2.88

1.16

.94

FD40–1001–06–06

11

–08

1/ -14 2

3.50

1.28

.88

FD40–1001–08–08

12 13 14 15 16

Male Half Female Pipe/Non-Valved

–04

1/ -27 8

1.21

.56

FD40–1013–02–04

17

–04

1/ -18 4

1.62

.62

FD40–1013–04–04

18

–04

3/ -18 8

1.80

.88

FD40–1013–06–04

19

–06

3/ -18 8

1.90

.88

FD40–1013–06–06

20

–08

1/ -14 2

2.40

1.12

FD40–1013–08–08

21 22

QUICK DISCONNECT COUPLINGS

23 24 Male Half Male Pipe/Non-Valved

–04

1/ -27 8

1.50

.50

FD40–1014–02–04

25

–04

1/ -18 4

1.75

.56

FD40–1014–04–04

26

–04

3/ -18 8

1.75

.69

FD40–1014–06–04

27

–06

1/ -18 4

1.88

.62

FD40–1014–04–06

28

–06

3/ -18 8

1.88

.69

FD40–1014–06–06

29

–06

1/ -14 2

2.13

.88

FD40–1014–08–06

30

–08

3/ -18 8

2.18

.69

FD40–1014–06–08

31

–08

1/ -14 2

2.44

.88

FD40–1014–08–08

32

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

18

FD41 Series/ARO 210 Interchange – Air

The FD41 interchanges with the ARO 210 Series for compressed air service, with a self-sealing female half and straight through male half.

Flow Data

• Designed to interchange with ARO 210 Series. • Automatic sleeve for one hand push-to-connect

FD 41 SERIES PRESSURE DROP VERSUS FLOW GRAPH

operation.

5.0 4.5 4.0 3.5 3.0 2.5

• Swivels 360°, eliminating hose kinking. • Designed to assure high flow with low pressure drop for peak tool performance.

• Standard seal material – Buna-N. • Standard body material – Zinc plated steel.

PRESSURE DROP IN PSI

2.0 1.5 04

QUICK DISCONNECT COUPLINGS

AIR

1.0 .9 .8 .7 .6 .5 .4 .3 .2

.1

1

2

3

4

5 6 7 8 9 10

15

20 25 30 35 40 50 60

80 100

CUBIC FEET PER MINUTE FLOW (AT 100 PSI INLET PRESSURE)

Physical Characteristics Coupling Size

Maximum Operating Pressure (psi)

–04

300

Mininum Burst Pressure (psi) Female Half Only

Connected

Vacuum (in./Hg.) Connected Only

3000

8000

28

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

19

AIR

FD41 Series Female Half Female Pipe/Valved

Coupling Size

Thread Size (P)

–04

1/

Dimensional Data 1 A B 2.15 1.12 .62

–04

1/

1.62

8-27 4-18

1.12

.81

Part Number Buna-N FD41–1000–02–04 FD41–1000–04–04

Line Ref. 1 2 3 4 5 6 7 8

Male Half Female Pipe/Non-Valved

–04

1/

4-18

1.51

.62

FD41–1013–04–04

9 10 11 12 13 14 15 16

Male Half Male Pipe/Non-Valved

–04

1/

4-18

1.61

.56

FD41–1014–04–04

17 18 19 20 21

QUICK DISCONNECT COUPLINGS

22 23 24

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

20

QUICK DISCONNECT COUPLINGS

AIR ™

FD43 Series/Industrial Interchange—Air

The FD43 Series is a manual retract-type ball latch industrial interchange coupling. Ideal for compressed air service, the FD43 uses FD40 male tips. Meets dimensional requirements of MIL-C-4109 specifications for industrial interchangeability. Protective collar to prevent accidental snagging and disconnection. Manual retract latch design allows quick and easy connection of hose lines. Swivels 360°, eliminating hose kinking. Standard seal material – Neoprene. Standard body material – Zinc plated steel.

Flow Data

• • • • • •

Physical Characteristics Coupling Dash Size

–04 –06 –08

Maximum Minimum Burst Pressure (psi) Operating Vacuum Pressure Female (in./Hg.) (psi) Half Only Connected Connected Only

300 300 300

3000 3000 2000

8000 8000 8000

Not Rated Not Rated Not Rated

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

21

AIR

FD43 Series Female Half Female Pipe/Valved

Female Half Male Pipe/Valved

Female Half SOCKETLESS™ Hose Barb/Valved

Coupling Thread Hose Dimensional Data Size Size(P) I.D. 1 A B 1/ -27 –04 1.88 .88 .75 8

Part Number Neoprene FD43–1001–02–04

Line Ref. 1

–04

1/

2.09

.88

.75

FD43–1001–04–04

2

–04

3/

2.16

.88

.81

FD43–1001–06–04

3

–06

1/

2.38

1.06

.88

FD43–1001–04–06

4

–06

3/

2.38

1.06

.88

FD43–1001–06–06

5

–06

1/

2.53

1.06 1.00

FD43–1001–08–06

6

–08

1/

3.06

1.19 1.00

FD43–1001–08–08

7

–04

1/

2.19

.88

.75

FD43–1011–02–04

8

–04

1/

2.28

.88

.75

FD43–1011–04–04

9

–04

3/

2.34

.88

.75

FD43–1011–06–04

10

–06

1/

2.41

1.06

.88

FD43–1011–04–06

11

–06

3/

2.44

1.06

.88

FD43–1011–06–06

12

–06

1/

2.56

1.06

.88

FD43–1011–08–06

13

–08

1/

3.09

1.19 1.00

FD43–1011–08–08

14

4-18 8-18 4-18 8-18 2-14 2-14 8-27 4-18 8-18 4-18 8-18 2-14 2-14

–04

1/

2.78

.88

.75

FD43–1031–04–04

15

–04

3/

2.78

.88

.75

FD43–1031–06–04

16

4 8

17 18 19 20 21 Male Half Female Pipe/Non-Valved

–04

1/

1.21

.56

FD40–1013–02–04

22

–04

1/

1.62

.62

FD40–1013–04–04

23

–04

3/

1.80

.88

FD40–1013–06–04

24

–06

3/

1.90

.88

FD40–1013–06–06

25

–08

1/

2.40

1.12

FD40–1013–08–08

8-27 4-18 8-18 8-18 2-14

QUICK DISCONNECT COUPLINGS

26 27 28

Male Half Male Pipe/Non-Valved

–04

1/

1.50

.50

FD40–1014–02–04

29

–04

1/

1.75

.56

FD40–1014–04–04

30

–04

3/

1.75

.69

FD40–1014–06–04

31

–06

1/

1.88

.62

FD40–1014–04–06

32

–06

3/

1.88

.69

FD40–1014–06–06

33

–06

1/

2.13

.88

FD40–1014–08–06

34

–08

3/

2.18

.69

FD40–1014–06–08

35

–08

1/

2.44

.88

FD40–1014–08–08

36

8-27 4-18 8-18 4-18 8-18 2-14 8-18 2-14

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

22

QUICK DISCONNECT COUPLINGS

FLUID DRAIN ™

FD14 Series/Drain Coupling

Male Half

Female Half Non-Valved

Female Half Valved

The FD14 Drain coupling is designed to serve as a drain port for use with systems such as the Eaton FLOCS (Fast Lube Oil Change System) as well as providing a purging port for use during prefill operations.

• Low-Profile, with multiple sealing mechanisms • O-ring – primary seal • Metal-to-metal – Secondary Seal • Protective cap - Secondary Seal • Push-To-Connect female half for easy one-hand operation • Broad range of standard thread styles for Male Half • Utilizes a Copper-Crush gasket to seat against the port face.

• Standard male half seal material - Viton • Standard female half seal material - Buna-N • Standard body material - Zinc plated steel with zinc die-cast valve • Rubber molded cap • Standard material - Buna-N Physical Characteristics Maximum Minimum Operating Burst Coupling Pressure Pressure Vacuum Size (psi) (psi) (in./Hg.)

-06

50

200

28

Rated Flow (gpm)

3

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

23

FLUID DRAIN

Eaton FD14 Drain Coupling Providing direct access for fast oil changes. The FLOCS Direct Access Conversion Kit uses the Eaton-developed FD14 Drain Coupling as an alternative to the standard remote hose kit. This coupling design permits easy, onehand connection and disconnection of the evacuation unit’s hose.

A

Coupling Size Thread Size (P)

-06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06 -06

1/2 - 20 UNF - 2A M18 x 1.5 6g M14 x 1.25 6g 1 1/4 - 18 UNEF - 2A 1 - 18 UNS - 2A 7/8 - 18 UNS - 2A 5/8 - 18 UNF - 2A 3/4 - 16 UNF - 2A 7/8 - 14 UNF - 2A M24 x 2 6g 9/16 - 18 UNF - 2A 1 1/8 - 12 UNF - 2A M20 x 1.5 6g M25 x 1.5 6g M22 x 1.5 6g M24 x 1.5 6g 1 1/16 - 12 UN - 2A M30 x 1.5 6g 1/2 - 14 UNS - 2A M12 x 1.5 6g M14 x 1.5 6g M12 x 1.75 6g 3/4 - 14 Dryseal NPTF 1/2 - 14 Dryseal NPTF M27 x 2 6g

A

B

1.52 1.52 1.52 1.54 1.54 1.54 1.52 1.54 1.54 1.54 1.52 1.54 1.54 1.54 1.54 1.54 1.54 1.54 1.52 1.52 1.52 1.52 1.69 1.60 1.54

.96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96 .96

1

1 1/16 1 1/4 1 1/16 1 1/2 1 1/4 1 1/4 1 1/16 1 1/4 1 1/4 1 1/4 1 1/16 1 1/2 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/16 1 1/16 1 1/16 1 1/16 1 1/4 1 1/16 1 1/2

Min. Ass’y Torque (Ft-Lbs.)

Assembly† (Includes Gasket & Cap)

20-24* 20-40* 20-24* 30-60* 30-60* 30-60* 20-40* 30-50* 30-60* 30-60* 20-40* 30-60* 30-60* 30-60* 30-60* 30-60* 30-60* 30-60* 20-24* 20-24* 20-24* 20-24*

FD14-4002-01-06** FD14-4002-02-06** FD14-4002-03-06** FD14-4002-05-06†† FD14-4002-06-06†† FD14-4002-07-06†† FD14-4002-08-06** FD14-4002-09-06†† FD14-4002-10-06†† FD14-4002-11-06†† FD14-4002-12-06** FD14-4002-14-06†† FD14-4002-16-06†† FD14-4002-17-06†† FD14-4002-18-06†† FD14-4002-19-06†† FD14-4002-20-06†† FD14-4002-21-06†† FD14-4002-22-06** FD14-4002-23-06** FD14-4002-24-06** FD14-4002-25-06** FD14-4002-26-06†† FD14-4002-27-06** FD14-4002-29-06††

30-60*

Gasket (Copper-Crush) Cap (Brass)

FD14-1206-01 FD14-1206-04 FD14-1206-02 FD14-1206-11 FD14-1206-07 FD14-1206-06 FD14-1206-03 FD14-1206-04 FD14-1206-06 FD14-1206-07 FD14-1206-02 FD14-1206-09 FD14-1206-05 FD14-1206-07 FD14-1206-06 FD14-1206-07 FD14-1206-08 FD14-1206-10 FD14-1206-01 FD14-1206-01 FD14-1206-02 FD14-1206-01 None Needed None Needed FD14-1206-09

FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06 FD14-1210-06

QUICK DISCONNECT COUPLINGS

* CAUTION: Failure to meet minimum assembly torque could result in fluid leakage. † Note: FD14 with Rubber Cap can be ordered using FD14-1002-SIZE part numbering. Coupling Size

-06

Thread Size (P)

A

3/4 - 14 Dryseal NPTF 1.52

B

1

Assembly

1.81 1 5/16 FD14-1001-12-06

Coupling Size

A

B

Thread Size (P)

Assembly

-06 SOCKETLESSTM

2.34

1.50

5/8”F

FD14-4003-10-06

Coupling Size

A

B

Cap (Buna-N)

-06

0.519

1.400

FD14-1204-06

A

Coupling Size

A

B

Assembly

-06

0.726

1.25

FD14-1210-06

Coupling Size

-06

Thread Size (P)

Assembly

3/4 - 14 Dryseal NPTF FD14-1004-12-12

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

24

QUICK DISCONNECT COUPLINGS

FLUID SAMPLING ™

FD15 Series/Oil Sampling Valve

0–50 psi Part Number FD15–1026–04 FD15–1025–04

50–300 psi Inlet Ports 1/ ” NPTF 4 7/ -20 Male 16

ORB

As required in MIL-V-81940/2-1 this valve’s flow rate is between 100 and 1500 milliliters per minute at pressures from 0–50 psi. (MIL-V-81940/2-1 applies only to pressures from 50–300 psi.) FD15 Oil Sampling Valve: In-line sampling of system fluids is made without system shutdown, usually in less than one minute, and without fluid contamination. Application: Engine oil, lubricating oil, transmission fluid and hydraulic fluids in mobile construction equipment, military vehicles, trucks and stationary equipment. For best results, Eaton FD15 Oil Sampling Valves should be installed in dynamic fluid lines in low pressure and return lines. If only one sampling point can be chosen, it should be in the return line, upstream of any return line filter. This will insure a representative sample of all components in the fluid system for their present condition. Operation: Remove metal dustcover on discharge port. Discharge approximately 200 ml of oil to flush valve by turning knurled knob 1/4 turn to the right. Dispose of this sample in the appropriate manner. Locate clean oil sample bottle under discharge port.

Part Number Inlet Ports 1/ ” NPTF FD15–1000–02 8 1/ ” NPTF FD15–1000–04* 4 7/ -20 Male ORB FD15–1002–04 16 *The 1/4” NPTF version is qualified to MIL-V-81940/2-1 and its performance is representative of the other inlet port configurations listed above. QPL-81940-9 6-5-89 (Sample bottles are usually supplied by the oil analysis lab.) Turn knurled knob 1/4 turn to the right until bottle is filled to the desired level. The knob can be backed off to throttle the rate of flow. When bottle is filled let go of the knurled knob, the valve will close automatically. Replace metal dustcover wrench tight. Construction: Corrosion resistant plated steel with brass internal components and Buna-N seal. Operating Temperature Range: –65°F to +275°F (–53°C to +135°C) Minimum Burst Pressure: 1200 psi Minimum Particle Restriction: 500 microns Maximum Torque to Operate: 10 in. lbs. Note: This valve is not intended for aerospace applications.

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

25

FLUID SAMPLING

FD15 Series Male Pipe Thread 50–300 psi

Coupling Thread Size Size (P)

Dimensional Data

Part Number

A

B

C

1

2

3

Buna-N

Line Ref.

1/

2.42

1.00

1.30

.69

.38

FD15–1000–02

1

1/

2.56

1.00

1.30

.69

.38

FD15–1000–04

2

8-27 4-18

3 4 5 6 7 8

Male SAE O-Ring Thread 50–300 psi

7/

16-20

2.79

1.00

1.30

.69

.38

.56

FD15–1002–04

9 10 11 12 13 14 15 16

Male Pipe Thread 0–50 psi

1/

4-18

2.56

1.00

1.30

.69

.38

FD15–1026–04

QUICK DISCONNECT COUPLINGS

17 18 19 20 21 22 23 24

Male SAE O-Ring Thread 0–50 psi

7/

16-20

2.79

1.00

1.30

.69

.38

.56

FD15–1025–04

25 26 27 28 29 30 31 32

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

26

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

FD35 Series/Arc Latch™ for 10,000 psi High Pressure Applications

The FD35 Series Arc Latch™ design has a greater surface contact area for long surface life in rugged high pressure applications. The maximum operating pressure is 10,000 psi.

Flow Data

sleeve lock prevents accidental • Safety disconnection. duty back-up ring prevents O-ring • Heavy extrusion. treated and plated steel for greater wear • Heat and corrosion resistance. poppet valves provide excellent • Self-sealing high and low pressure sealing.

• Standard seal material – Viton. • Standard body material – Zinc plated steel.

Physical Characteristics Maximum Minimum Operating Burst Coupling Pressure Pressure Vacuum Size (psi) (psi) (in./Hg.)

-06

10,000

40,000

28

Rated Air Fluid Flow Inclusion Loss (gpm) (cc. max.) (cc. max.)

2

0.50

0.50

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

27

FLUID TRANSFER & HYDRAULIC

FD35 Series Male Half Female Pipe/Valved

Coupling Thread Size Size (P) –06

3/ -18 8

Dimensional Data A B 11 2.05

0.94

Part Number Buna-N

Line Ref.

FD35–1002–06–06

1 2 3 4 5 6 7 8

Female Half Female Pipe/Valved

–06

3/ -18 8

2.56

1.27 0.94

FD35–1001–06–06

9 10 11 12 13 14 15 16

Complete Coupling Female Pipe/Valved

–06

3/ -18 8

3.53

FD35–1000–06–06

17 18 19 20 21

QUICK DISCONNECT COUPLINGS

22 23 24 Male Half Female SAE O-Ring/Valved

–06

9/ -18 16

2.05

0.94

FD35–1008–06–06

25 26 27 28 29 30 31 32

Female Half Female SAE O-Ring/Valved

–06

9/ -18 16

2.56

1.27 0.94

FD35–1007–06–06

33 34 35 36 37 38 39 40

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

28

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

Coupling Thread Dimensional Data 1 Size Size(P) A B

FD35 Series

-06

Complete Coupling Female SAE O-Ring/Valved

9/ -18 16

3.53

Part Number Viton FD35–1006–06–06

Line Ref. 1 2 3 4 5 6 7 8

Male Half Female Pipe/45 psi Bleed Valve

-06

3/ -18 8

2.05

0.94

FD35–1043–06–06

9 10 11 12 13 14

Incorporates a special relief valve set at 45 psi, preventing disconnected pressure build-up.

15 16

Male Half Female SAE O-Ring/ 45 psi Bleed Valve

-06

9/ -18 16

2.12

0.94

FD35–1044–06–06

17 18 19 20 21 22 23

Incorporates a special relief valve set at 45 psi, preventing disconnected pressure build-up.

24

Repair Kits

25 -06

Male Valving

FF10173–06

26

-06

Female Valving

FF10174–06

27

-06

Female Locking Arc Latch

FF10175–06

28

-06

Fits Male and Female Halves

Accessories Dust Cover

29 FD35–1042–06

30 31 32 33 34 35 36 37

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

29

FLUID TRANSFER & HYDRAULIC

FD42 Series/Pioneer 4000 Interchange

The FD42 Series coupling is designed as a Pioneer 4000 interchange to accommodate high surge flows typically found in snow plow applications. The maximum operating pressure is 3,000 psi. Teflon† back up ring in female half improves impulse life. Self-sealing poppet valve design provides excellent high and low pressure sealing. PUSH-PULL™ ball latch design allows quick and easy connection and disconnection of hose lines. Interchanges with Pioneer 4000-2 and Safeway S20-A. Retaining groove on female half for bulkhead mounting. Male half can be bulkhead mounted with optional adapter. Standard seal material – Buna-N. Standard body material – Zinc plated steel with zinc poppet guides.

Flow Data

• • •

Pressure Drop Versus Flow Graph

QUICK DISCONNECT COUPLINGS

50 45 40 35 30 25

Pressure Drop In PSI

20

• • • • •

15 10 9 8 7 6 5 4 3

2

1

1

2

3

4

5 6 7 8 9 10

15

20 25 30 35 40 50 60

80 100

Gallons Per Minute Flow (Test Fluid MIL-H-5606 Hydraulic Oil At 100˚F.)

Physical Characteristics Maximum Mininum Operating Burst Coupling Pressure Pressure Size (psi) (psi)

-04

3000

12,000

Vacuum (in./Hg.)

28

Rated Air Fliud Flow Inclusion Loss (gpm) (cc. max.) (cc. max.)

3

.62

.80

† Teflon is a registered trademark of Dupont.

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

30

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

Coupling Size

FD42 Series Male Half Female Pipe/Valved

-04

Thread Size (P) 1/

4-18

Dimensional Data A

B

C

D

E

1.34

Part Number 1

.75

Buna-N FD42–1002–04–04

Line˜ Ref.˜ 1 2 3 4 5 6 7 8

Female Half Female Pipe/Valved

-04

1/

4-18

2.04

.87

.05

.10

.88

FD42–1001–04–04

9 10 11 12 13 14 15 16

Complete Coupling Female Pipe/Valved

-04

1/

4-18

2.68

FD42–1000–04–04

17 18 19 20 21 22 23 24

Male Half Female SAE O-Ring/Valved

-04

9/ -18 16

1.63

.81

FD42–1010–06–04

25 26 27 28 29 30 31 32

Female Half Female SAE O-Ring/Valved

-04

9/ -18 16

2.13 1.06

.87

.05

.10

.88

FD42–1008–06–04

33 34 35 36 37 38 39 40

Complete Coupling Female SAE O-Ring/Valved

-04

9/ -18 16

2.97

FD42–1006–06–04

41 42 43 44 45 46 47

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

31

FLUID TRANSFER & HYDRAULIC

FD42 Accessories Bulkhead Adapter

Coupling Size -04

Thread Size (P) 1/ -18 4

Dimensional Data A

B

C

1.39

.87

.08

D

E

Part Number 1

Buna-N

Line Ref.

.88

FF1607–0404S

1 2 3 4 5 6 7 8

Dust Cap/Plug (Fits Both Halves)

-04

FD48–1042–04

9 10 11 12 13 14 15 16

QUICK DISCONNECT COUPLINGS

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

32

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

FD45 Series/Industrial Interchange Series B ... (Steel)

Flow Data The FD45 Series steel is an industrial interchange popular in North America. Features rugged ball latch mechanism with automatic self-sealing poppet valves. Industrial interchange coupling conforming dimensionally to ISO standard 7241/1 Series B. PUSH-PULL™ ball latch design allows quick and easy connection and disconnection of hose lines. Self-sealing poppet valve design provides excellent high and low pressure sealing. Standard seal material – Buna-N, EPR and Viton. Standard body material – Zinc plated steel. (Brass poppet guide in –02 size.)

• • • • •

Physical Characteristics Maximum Minimum Operating Burst Coupling Pressure Pressure Vacuum Size (psi) (psi) (in./Hg.)

-02 -04 -06 -10 -12 -16

4,500 5,000 4,000 4,000 4,000 4,000

13,500 15,000 12,000 12,000 12,000 12,000

28 28 28 28 28 28

Rated Air Fluid Flow Inclusion Loss (gpm) (cc. max.) (cc. max.)

1 3 6 12 28 50

.50 .50 2.5 4.0 11.0 18.0

.50 .50 1.3 2.8 8.2 16.0

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

33

FLUID TRANSFER & HYDRAULIC

FD45 Steel Male Half Female Pipe/Valved

Coupling Thread Size Size (P) -02 -04 -06 -10 -12 -16

1/ -27 8 1/ -18 4 3/ -18 8 1/ -14 2 3/ -14 4 1-111/2

Dimensional Data A

B

Part Number

Line Ref.

1

Buna-N

Viton

EPR

1.28

.56

FD45–1002–02–02

FD45–1071–02–02

FD45–1064–02–02

1

1.50

.75

FD45–1002–04–04

FD45–1071–04–04

FD45–1064–04–04

2

1.66

.88

FD45–1002–06–06

FD45–1071–06–06

FD45–1064–06–06

3

1.93

1.06 FD45���1002–08–10

FD45–1071–08–10

FD45–1064–08–10

4

2.26

1.31 FD45–1002–12–12

FD45–1071–12–12

FD45–1064–12–12

5

2.72

1.62 FD45–1002–16–16

FD45–1071–16–16

FD45–1064–16–16

6 7 8

Female Half Female Pipe/Valved

-02 -04 -06 -10 -12 -16

1/ -27 8 1/ -18 4 3/ -18 8 1/ -14 2 3/ -14 4 1-111/2

1.81 .96

.75

FD45–1003–02–02

FD45–1070–02–02

FD45–1065–02–02

9

2.22 1.13 .81

FD45–1003–04–04

FD45–1070–04–04

FD45–1065–04–04

10

2.45 1.38 1.06 FD45–1003–06–06

FD45–1070–06–06

FD45–1065–06–06

11

2.86 1.69 1.31 FD45–1003–08–10

FD45–1070–08–10

FD45–1065–08–10

12

3.40 2.06 1.62 FD45–1003–12–12

FD45–1070–12–12

FD45–1065–12–12

13

4.02 2.44 2.00 FD45–1003–16–16

FD45–1070–16–16

FD45–1065–16–16

14 15 16

Complete Coupling Female Pipe/Valved

-02 -04 -06 -10 -12 -16

1/ -27 8 1/ -18 4 3/ -18 8 1/ -14 2 3/ -14 4 1-111/2

2.31

FD45–1000–02–02

FD45–1072–02–02

FD45–1063–02–02

17

2.74

FD45–1000–04–04

FD45–1072–04–04

FD45–1063–04–04

18

3.04

FD45–1000–06–06

FD45–1072–06–06

FD45–1063–06–06

19

3.54

FD45–1000–08–10

FD45–1072–08–10

FD45–1063–08–10

20

4.02

FD45–1000–12–12

FD45–1072–12–12

FD45–1063–12–12

21

4.88

FD45–1000–16–16

FD45–1072–16–16

FD45–1063–16–16

22

QUICK DISCONNECT COUPLINGS

23 24 Male Half Female Pipe/Non-Valved

-02 -04 -06 -10 -12 -16

1/ -27 8 1/ -18 4 3/ -18 8 1/ -14 2 3/ -14 4 1-111/2

1.20

.56

FD45–1061–02–02

FD45–1061–02–02

FD45–1061–02–02

25

1.37

.75

FD45–1061–04–04

FD45–1061–04–04

FD45–1061–04–04

26

1.50

.88

FD45–1061–06–06

FD45–1061–06–06

FD45–1061–06–06

27

1.76

1.06 FD45–1061–08–10

FD45–1061–08–10

FD45–1061–08–10

28

2.00

1.31 FD45–1061–12–12

FD45–1061–12–12

FD45–1061–12–12

29

2.43

1.62 FD45–1061–16–16

FD45–1061–16–16

FD45–1061–16–16

30 31

Will not operate with valved coupling halves.

32

No valve actuator.

Female Half Female Pipe/Non-Valved

-02 -04 -06 -10 -12 -16

1/ -27 8 1/ -18 4 3/ -18 8 1/ -14 2 3/ -14 4 1-111/2

1.81 .96

.75

FD45–1047–02–02

2.22 1.13 .81

FD45–1172–02–02

FD45–1207–02–02

33

FD45–1047–04–04

FD45–1172–04–04

FD45–1207–04–04

34

2.45 1.38 1.06 FD45–1047–06–06

FD45–1172–06–06

FD45–1207–06–06

35

2.86 1.69 1.31 FD45–1047–08–10

FD45–1172–08–10

FD45–1207–08–10

36

3.40 2.06 1.62 FD45–1047–12–12

FD45–1172–12–12

FD45–1207–12–12

37

4.02 2.44 2.00 FD45–1047–16–16

FD45–1172–16–16

FD45–1207–16–16

38 39

Will not operate with valved coupling halves. No valve actuator.

40

Repair Kit Each kit will repair one male or female half.

41 -02

FF013–02†

FF014–02†

FF015–02†

42

-04

FF013–04

FF014–04

FF015–04

43

-06

FF013–06

FF014–06

FF015–06

44

-10

FF013–10

FF014–10

FF015–10

45

-12

FF013–12

FF014–12

FF015–12

46

-16

FF013–16

FF014–16

FF015–16

47 48

†The –02 coupling size valving is not repairable. This size repair kit contains an interface seal and back-up ring.

49

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

34

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

FD45 Steel Complete Coupling Female Pipe/Non-Valved

Coupling Thread Dimensional Data Part Number Line Size Size (P) A Ref. 1 B Buna-N Viton EPR 1 –02 2.31 FD45–1044–02–02 FD45–1173–02–02 FD45–1206–02–02 1 /8-27 –04

1/

2.74

FD45–1044–04–04 FD45–1173–04–04 FD45–1206–04–04

2

–06

3/

3.04

FD45–1044–06–06 FD45–1173–06–06 FD45–1206–06–06

3

–10

1/

3.54

FD45–1044–08–10 FD45–1173–08–10 FD45–1206–08–10

4

–12

3/

5

–16

4-18 8-18 2-14 4-14

4.02

FD45–1044–12–12 FD45–1173–12–12 FD45–1206–12–12

1-111/2

4.88

FD45–1044–16–16 FD45–1173–16–16 FD45–1206–16–16

6 7 8

Male Half Female Pipe/Pusher Style Valving

–02

1/

1.28

.56 FD45–1046–02–02 FD45–1046–02–02 FD45–1046–02–02

–04

1/

1.50

.75 FD45–1046–04–04 FD45–1046–04–04 FD45–1046–04–04 10

–06

3/

1.66

.88 FD45–1046–06–06 FD45–1046–06–06 FD45–1046–06–06 11

–10

1/

1.93

1.06 FD45–1046–08–10 FD45–1046–08–10 FD45–1046–08–10 12

–12

3/

–16

8-27 4-18 8-18 2-14

9

4-14

2.26

1.31 FD45–1046–12–12 FD45–1046–12–12 FD45–1046–12–12 13

1-111/2

2.72

1.62 FD45–1046–16–16 FD45–1046–16–16 FD45–1046–16–16 14 15

Incorporates a pusher device to open mating valved coupling halves.

Female Half Female Pipe/Pusher Style Valving

16 –02

1/

1.81

.96

.75 FD45–1045–02–02 FD45–1228–02–02 FD45–1229–02–02 17

–04

1/

2.22

1.13

.81 FD45–1045–04–04 FD45–1228–04–04 FD45–1229–04–04 18

–06

3/

2.45

1.38

1.06 FD45–1045–06–06 FD45–1228–06–06 FD45–1229–06–06 19

–10

1/

2.86

1.69

1.31 FD45–1045–08–10 FD45–1228–08–10 FD45–1229–08–10 20

–12

3/

–16

8-27 4-18 8-18 2-14 4-14

3.40

2.06

1.62 FD45–1045–12–12 FD45–1228–12–12 FD45–1229–12–12 21

1-111/2

4.02

2.44

2.00 FD45–1045–16–16 FD45–1228–16–16 FD45–1229–16–16 22 23

Incorporates a pusher device to open mating valved coupling halves.

24

Male Half Female SAE O-ring/Valved

–04

9/ 16

1.68

0.81 FD45–1415–06–04

–16

15/16 -12 2.72

1.62 FD45–1168–16–16

Female Half Female SAE O-ring/Valved *With sleeve lock

–04

9/ -18 16

2.31

0.94 FD45–1414–06–04*

–16

15/16 -12

4.02

2.00 FD45–1169–16–16

Repair Kit

–02

FF013–02†

FF014–02†

FF015–02†

26

Each kit will repair one male or female half.

–04

FF013–04

FF014–04

FF015–04

27

–06

FF013–06

FF014–06

FF015–06

28

–10

FF013–10

FF014–10

FF015–10

29

–12

FF013–12

FF014–12

FF015–12

30

–16

FF013–16

FF014–16

FF015–16

31

†The –02 coupling size valving is not repairable. This size repair kit contains an interface seal and back-up ring.

-18

FD45–1238–06–04

FD45–1237–06–04*

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

35

FLUID TRANSFER & HYDRAULIC

Accessories Dust Cap

Dust Plug

Coupling Thread Dimensional Data Size Size (P) A 1 B

Buna-N

Part Number Viton

EPR

Line Ref.

–02

FD45–1040–02

34

–04

FD45–1040–04

35

–06

FD45–1040–06

36

–10

FD45–1040–10

37

–12

FD45–1040–12

38

–16

FD45–1040–16

39

–02

FD45–1041–02

41

–04

FD45–1041–04

42

–06

FD45–1041–06

43

–10

FD45–1041–10

44

–12

FD45–1041–12

45

–16

FD45–1041–16

46

QUICK DISCONNECT COUPLINGS

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

36

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

FD45 Series/Industrial Interchange Series B . . . (Brass)

The FD45 Series brass industrial interchange coupling offers corrosion resistance where steel couplings are unacceptable. This general purpose coupling uses a PUSH-PULL™ latch mechanism.

Flow Data

Dual interface O-Rings in the female half provide • redundant sealing while connected. Brass construction with stainless steel springs for • greater corrosion resistance and fluid compatibility. Industrial interchange coupling conforming dimen• sionally to ISO standard 7241/1 Series B.

PUSH-PULL™ ball latch design allows quick and easy • connection and disconnection of hose lines. Self-sealing poppet valves provide excellent high and • low pressure sealing.

• Standard seal material – Buna-N, EPR and Viton. Standard body material – Brass with stainless steel • springs and balls.

Physical Characteristics Minimum Burst Pressure Coupling Size –02 –04 –06 –10 –12 –16 –20

Maximum Operating Pressure (psi) 1,000 1,000 1,000 1,000 1,000 1,000 1,000

Connected (psi) 11,000 18,000 12,000 12,000 10,000 8,500 6,000

Disconnected (psi) 12,000 14,000 9,000 6,500 10,000 11,000 6,000

Vacuum (in./Hg.) 28 28 28 28 28 28 28

Rated Flow (gpm) 1 3 6 12 28 50 75

Air Inclusion (cc. max.) .50 .50 2.5 4.0 11.0 18.0 30.0

Fluid Loss (cc. max) .50 .50 1.3 2.8 8.2 16.0 45.0

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

37

FLUID TRANSFER & HYDRAULIC

FD45 Brass Male Half Female Pipe/Valved

Coupling Thread Size Size (P)

Dimensional Data 1 A B

Buna-N

Part Number Viton

EPR

–02

1/ -27 8

1.28

.56

FD45–1086–02–02 FD45–1092–02–02 FD45–1153–02–02

1

–04

1/ -18 4

1.50

.69

FD45–1086–04–04 FD45–1092–04–04 FD45–1153–04–04

2

–06

3/ -18 8

1.66

.88

FD45–1086–06–06 FD45–1092–06–06 FD45–1153–06–06

3

–10

1/ -14 2

1.93

1.06

FD45–1086–08–10 FD45–1092–08–10 FD45–1153–08–10

4

–12

3/ -14 4

2.26

1.31

FD45–1086–12–12 FD45–1092–12–12 FD45–1153–12–12

5

–16

1-111/2

2.72

1.62

FD45–1086–16–16 FD45–1092–16–16 FD45–1153–16–16

6

–20

11/4-111/2

4.25

2.38

FD45–1086–20–20 FD45–1092–20–20 FD45–1153–20–20

7

Art is not representative of –20 size. Female Half Female Pipe/Valved

8

–02

1/ -27 8

1.81

.96

.75

FD45–1101–02–02 FD45–1091–02–02 FD45–1156–02–02

9

–04

1/ -18 4

2.22

1.13

.81

FD45–1101–04–04 FD45–1091–04–04 FD45–1156–04–04

10

–06

3/ -18 8

2.45

1.38 1.06

FD45–1101–06–06 FD45–1091–06–06 FD45–1156–06–06

11

–10

1/ -14 2

2.86

1.69 1.31

FD45–1101–08–10 FD45–1091–08–10 FD45–1156–08–10

12

–12

3/ -14 4

3.40

2.01 1.62

FD45–1101–12–12 FD45–1091–12–12 FD45–1156–12–12

13

–16

1-111/2

4.02

2.38 1.94

FD45–1101–16–16 FD45–1091–16–16 FD45–1156–16–16

14

–20

11/4-111/2

4.49

2.62 2.38

FD45–1101–20–20 FD45–1091–20–20 FD45–1156–20–20

15

Art is not representative of –20 size. Complete Coupling Female Pipe/Valved

16

–02

1/ -27 8

2.31

FD45–1100–02–02 FD45–1090–02–02 FD45–1157–02–02

17

–04

1/ -18 4

2.74

FD45–1100–04–04 FD45–1090–04–04 FD45–1157–04–04

18

–06

3/ -18 8

3.04

FD45–1100–06–06 FD45–1090–06–06 FD45–1157–06–06

19

–10

1/ -14 2

3.54

FD45–1100–08–10 FD45–1090–08–10 FD45–1157–08–10

20

–12

3/ -14 4

4.02

FD45–1100–12–12 FD45–1090–12–12 FD45–1157–12–12

21

–16

1-111/2

4.88

FD45–1100–16–16 FD45–1090–16–16 FD45–1157–16–16

22

–20

11/4-111/2

6.80

FD45–1100–20–20 FD45–1090–20–20 FD45–1157–20–20

23

Art is not representative of –20 size. Male Half Female Pipe/Non-Valved

Will not operate with valved coupling halves. No valve actuator.

Female Half Female Pipe/Non-Valved

Will not operate with valved coupling halves. No valve actuator.

24

–02

1/ -27 8

1.20

.56

FD45–1175–02–02 FD45–1175–02–02 FD45–1175–02–02

25

–04

1/ -18 4

1.37

.69

FD45–1175–04–04 FD45–1175–04–04 FD45–1175–04–04

26

–06

3/ -18 8

1.50

.88

FD45–1175–06–06 FD45–1175–06–06 FD45–1175–06–06

27

–10

1/ -14 2

1.76

1.06

FD45–1175–08–10 FD45–1175–08–10 FD45–1175–08–10

28

–12

3/ -14 4

2.00

1.31

FD45–1175–12–12 FD45–1175–12–12 FD45–1175–12–12

29

–16

1-111/2

2.43

1.62

FD45–1175–16–16 FD45–1175–16–16 FD45–1175–16–16

30

–20

11/4-111/2

4.25

2.38

FD45–1175–20–20 FD45–1399–20–20 FD45–1400–20–20

31

Art is not representative of –20 size.

32

–02

1/ -27 8

1.81

.96

.75

FD45–1176–02–02 FD45–1180–02–02 FD45–1178–02–02

33

–04

1/ -18 4

2.22

1.13

.81

FD45–1176–04–04 FD45–1180–04–04 FD45–1178–04–04

34

–06

3/ -18 8

2.45

1.38 1.06

FD45–1176–06–06 FD45–1180–06–06 FD45–1178–06–06

35

–10

1/ -14 2

2.86

1.69 1.31

FD45–1176–08–10 FD45–1180–08–10 FD45–1178–08–10

36

–12

3/ -14 4

3.40

2.01 1.62

FD45–1176–12–12 FD45–1180–12–12 FD45–1178–12–12

37

–16

1-111/2

4.02

2.38 1.94

FD45–1176–16–16 FD45–1180–16–16 FD45–1178–16–16

38

–20

11/4-111/2

4.49

2.62 2.38

FD45–1176–20–20 FD45–1180–20–20 FD45–1178–20–20

39

Art is not representative of –20 size.

40

Repair Kit Each kit will repair one male or female half.

†The –02 coupling size valving is not repairable. This size repair kit contains an interface seal and back-up ring.

Line Ref.

QUICK DISCONNECT COUPLINGS

41 –02

FF016–02†

FF017–02†

FF018–02†

42

–04

FF016–04

FF017–04

FF018–04

43

–06

FF016–06

FF017–06

FF018–06

44

–10

FF016–10

FF017–10

FF018–10

45

–12

FF016–12

FF017–12

FF018–12

46

–16

FF016–16

FF017–16

FF018–16

47

–20

FF016–20

FF017–20

FF018-20

48

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

38

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

FD45 Brass Complete Coupling Female Pipe/Non-Valved

Coupling Thread Dimensional Data 1 Size Size (P) A B

Buna-N

Part Number Viton

EPR

Line Ref.

–02

1/ -27 8

2.31

FD45–1174–02–02

FD45–1179–02–02

FD45–1177–02–02

1

–04

1/ -18 4

2.74

FD45–1174–04–04

FD45–1179–04–04

FD45–1177–04–04

2

–06

3/ -18 8

3.04

FD45–1174–06–06

FD45–1179–06–06

FD45–1177–06–06

3

–10

1/ -14 2

3.54

FD45–1174–08–10

FD45–1179–08–10

FD45–1177–08–10

4

–12

3/ -14 4

4.02

FD45–1174–12–12

FD45–1179–12–12

FD45–1177–12–12

5

–16

1-111/2

4.88

FD45–1174–16–16

FD45–1179–16–16

FD45–1177–16–16

6

11/4-111/2 6.80

FD45–1174–20–20

FD45–1179–20–20

FD45–1177–20–20

7

–20

Art is not representative of –20 size. Male Half Female Pipe/Pusher Style Valving

8 9

–04

1/ -18 4

1.50

.75 FD45–1201–04–04

FD45–1201–04–04

FD45–1201–04–04 10

–06

3/ -18 8

1.66

.88 FD45–1201–06–06

FD45–1201–06–06

FD45–1201–06–06 11

–10

1/ -14 2

1.93

1.06 FD45–1201–08–10

FD45–1201–08–10

FD45–1201–08–10 12

–12

3/ -14 4

2.26

1.31 FD45–1201–12–12

FD45–1201–12–12

FD45–1201–12–12 13

–16

1-111/2

2.72

1.62 FD45–1201–16–16

FD45–1201–16–16

FD45–1201–16–16 14 15

Incorporates a pusher device to open mating valved coupling halves.

Female Half Female Pipe/Pusher Style Valving

16 17 –04

1/ -18 4

2.22

1.13

.88 FD45–1203–04–04

FD45–1199–04–04

FD45–1211–04–04 18

–06

3/ -18 8

2.45

1.38

1.06 FD45–1203–06–06

FD45–1199–06–06

FD45–1211–06–06 19

–10

1/ -14 2

2.86

1.69

1.31 FD45–1203–08–10

FD45–1199–08–10

FD45–1211–08–10 20

–12

3/ -14 4

3.40

2.01

1.62 FD45–1203–12–12

FD45–1199–12–12

FD45–1211–12–12 21

–16

1-111/2

4.02

2.38

1.94 FD45–1203–16–16

FD45–1199–16–16

FD45–1211–16–16 22 23

Incorporates a pusher device to open mating valved coupling halves.

24

Repair Kit Each kit will repair one male or female half.

†The –02 coupling size valving is not repairable. This size repair kit contains an interface seal and back-up ring.

25 –02

FF016–02†

FF017–02†

FF018–02†

26

–04

FF016–04

FF017–04

FF018–04

27

–06

FF016–06

FF017–06

FF018–06

28

–10

FF016–10

FF017–10

FF018–10

29

–12

FF016–12

FF017–12

FF018–12

30

–16

FF016–16

FF017–16

FF018–16

31

–20

FF016–20

FF017–20

FF018–20

32

Accessories Dust Cap

33 –02

FD45–1040–02

34

–04

FD45–1040–04

35

–06

FD45–1040–06

36

–10

FD45–1040–10

37

–12

FD45–1040–12

38

–16

FD45–1040–16

39

–02

FD45–1041–02

41

–04

FD45–1041–04

42

–06

FD45–1041–06

43

–10

FD45–1041–10

44

–12

FD45–1041–12

45

–16

FD45–1041–16

46

40 Dust Plug

47

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

39

FLUID TRANSFER & HYDRAULIC

FD45 Series/Industrial Interchange Series B . . . (Stainless Steel)

The FD45 stainless steel is a general purpose industrial interchange coupling available valved or non-valved. Offered in 303/304 grades of stainless steel for excellent corrosion resistance in rugged applications. Industrial interchange coupling conforming dimensionally to ISO standard 7241/1 Series B. Stainless steel construction for greater corrosion resistance and fluid compatibility. PUSH-PULL™ ball latch design allows quick and easy connection and disconnection of hose lines. Self-sealing poppet valves provide excellent high and low pressure sealing. Standard seal material – Buna-N, EPR and Viton. Standard body material – Stainless Steel.

Flow Data

• • • • • •

QUICK DISCONNECT COUPLINGS

Physical Characteristics Maximum Operating Pressure Coupling Size –04 –06 –10 –12 –16

Hydraulic (psi) 3,000 1,500 1,500 1,500 1,250

Static (psi) 3,000 3,000 3,000 3,000 3,000

Minimum Burst Pressure (psi) 12,000 12,000 12,000 12,000 12,000

Vacuum (in./Hg.) 28 28 28 28 28

Rated Flow (gpm) 3 6 12 28 50

Air Inclusion (cc. max.) .50 2.5 4.0 11.0 18.0

Fluid Loss (cc. max) .50 1.3 2.8 8.2 16.0

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

40

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

FD45 Stainless Steel Male Half Female Pipe/Valved

Coupling Thread Dimensional Data 1 Size Size (P) A B

Buna-N

Part Number Viton

EPR

Line Ref.

–04

1/ -18 4

1.46

.69 FD45–1004–04–04

FD45–1078–04–04

FD45–1121–04–04

1

–06

3/ -18 8

1.66

.88 FD45–1004–06–06

FD45–1078–06–06

FD45–1121–06–06

2

–10

1/ -14 2

1.89

1.06 FD45–1004–08–10

FD45–1078–08–10

FD45–1121–08–10

3

–12

3/ -14 4

2.26

1.31 FD45–1004–12–12

FD45–1078–12–12

FD45–1121–12–12

4

–16

1-111/2

2.72

1.62 FD45–1004–16–16

FD45–1078–16–16

FD45–1121–16–16

5 6 7 8

Female Half Female Pipe/Valved

–04

1/ -18 4

2.22

1.13

.81 FD45–1005–04–04

FD45–1076–04–04

FD45–1122–04–04

9

–06

3/ -18 8

2.45

1.38

1.06 FD45–1005–06–06

FD45–1076–06–06

FD45–1122–06–06

10

–10

1/ -14 2

2.86

1.69

1.31 FD45–1005–08–10

FD45–1076–08–10

FD45–1122–08–10

11

–12

3/ -14 4

3.40

2.01

1.62 FD45–1005–12–12

FD45–1076–12–12

FD45–1122–12–12

12

–16

1-111/2

4.02

2.38

2.00 FD45–1005–16–16

FD45–1076–16–16

FD45–1122–16–16

13 14 15 16

Complete Coupling Female Pipe/Valved

–04

1/ -18 4

2.70

FD45–1001–04–04

FD45–1075–04–04

FD45–1120–04–04

17

–06

3/ -18 8

3.04

FD45–1001–06–06

FD45–1075–06–06

FD45–1120–06–06

18

–10

1/ -14 2

3.50

FD45–1001–08–10

FD45–1075–08–10

FD45–1120–08–10

19

–12

3/ -14 4

4.02

FD45–1001–12–12

FD45–1075–12–12

FD45–1120–12–12

20

–16

1-111/2

4.88

FD45–1001–16–16

FD45–1075–16–16

FD45–1120–16–16

21 22 23 24

Male Half Female Pipe/Non-Valved

–04

1/ -18 4

1.33

.69 FD45–1062–04–04

FD45–1062–04–04

FD45–1062–04–04

25

–06

3/ -18 8

1.50

.88 FD45–1062–06–06

FD45–1062–06–06

FD45–1062–06–06

26

–10

1/ -14 2

1.72

1.06 FD45–1062–08–10

FD45–1062–08–10

FD45–1062–08–10

27

–12

3/ -14 4

2.00

1.31 FD45–1062–12–12

FD45–1062–12–12

FD45–1062–12–12

28

–16

1-111/2

2.43

1.62 FD45–1062–16–16

FD45–1062–16–16

FD45–1062–16–16

29 30 31

Will not operate with valved coupling halves. No valve actuator.

Female Half Female Pipe/Non-Valved

32 –04

1/ -18 4

2.22

1.13

.81 FD45–1053–04–04

FD45–1195–04–04

FD45–1142–04–04

33

–06

3/ -18 8

2.45

1.38

1.06 FD45–1053–06–06

FD45–1195–06–06

FD45–1142–06–06

34

–10

1/ -14 2

2.86

1.69

1.31 FD45–1053–08–10

FD45–1195–08–10

FD45–1142–08–10

35

–12

3/ -14 4

3.40

2.01

1.62 FD45–1053–12–12

FD45–1195–12–12

FD45–1142–12–12

36

–16

1-111/2

4.02

2.38

2.00 FD45–1053–16–16

FD45–1195–16–16

FD45–1142–16–16

37 38 39 40

Will not operate with valved coupling halves. No valve actuator.

41

Repair Kit

–04

FF054–04

FF055–04

FF056–04

42

Each kit will repair one male or female half.

–06

FF054–06

FF055–06

FF056–06

43

–10

FF054–10

FF055–10

FF056–10

44

–12

FF054–12

FF055–12

FF056–12

45

–16

FF054–16

FF055–16

FF056–16

46 47 48

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

41

FLUID TRANSFER & HYDRAULIC

FD45 Stainless Steel Complete Coupling Female Pipe/Non-Valved

Coupling Thread Dimensional Data 1 Size Size(P) A B Buna-N 1/ -18 –04 2.70 FD45–1052–04–04 4

Part Number Viton FD45–1194–04–04

Line EPR Ref. FD45–1143–04–04 1

–06

3/ -18 8

3.04

FD45–1052–06–06

FD45–1194–06–06

FD45–1143–06–06

2

–10

1/ -14 2

3.50

FD45–1052–08–10

FD45–1194–08–10

FD45–1143–08–10

3

–12

3/ -14 4

4.02

FD45–1052–12–12

FD45–1194–12–12

FD45–1143–12–12

4

–16

1-111/2

4.88

FD45–1052–16–16

FD45–1194–16–16

FD45–1143–16–16

5 6 7 8

Male Half Female Pipe/Pusher Style Valving

–04

1/ -18 4

1.46

–06

3/ -18 8

1.66

.88

FD45–1059–06–06

FD45–1059–06–06

FD45–1059–06–06 10

–10

1/ -14 2

1.89

1.06

FD45–1059–08–10

FD45–1059–08–10

FD45–1059–08–10 11

–12

3/ -14 4

2.26

1.31

FD45–1059–12–12

FD45–1059–12–12

FD45–1059–12–12 12

–16

1-111/2

2.72

1.62

FD45–1059–16–16

FD45–1059–16–16

FD45–1059–16–16 13

.69

FD45–1059–04–04

FD45–1059–04–04

FD45–1059–04–04

9

14 15 Incorporates a pusher device to open mating coupling halves

Female Half Female Pipe/Pusher Style Valving

16 –04

1/ -18 4

2.22 1.13

.81

FD45–1056–04–04

FD45–1197–04–04

FD45–1209–04–04 17

–06

3/ -18 8

2.45 1.38

1.06

FD45–1056–06–06

FD45–1197–06–06

FD45–1209–06–06 18

–10

1/ -14 2

2.86 1.69

1.31

FD45–1056–08–10

FD45–1197–08–10

FD45–1209–08–10 19

–12

3/ -14 4

3.40 2.01

1.62

FD45–1056–12–12

FD45–1197–12–12

FD45–1209–12–12 20

–16

1-111/2

4.02 2.38

2.00

FD45–1056–16–16

FD45–1197–16–16

FD45–1209–16–16 21 22

QUICK DISCONNECT COUPLINGS

23 Incorporates a pusher device to open mating coupling halves

24

Repair Kit Each kit will repair one male or female half

25 –04

FF054–04

FF055–04

FF056–04

26

–06

FF054–06

FF055–06

FF056–06

27

–10

FF054–10

FF055–10

FF056–10

28

–12

FF054–12

FF055–12

FF056–12

29

–16

FF054–16

FF055–16

FF056–16

30 31 32

Accessories Dust Cap

Dust Plug

33 –04

FD45–1040–04

34

–06

FD45–1040–06

35

–10

FD45–1040–10

36

–12

FD45–1040–12

37

–16

FD45–1040–16

38

–04

FD45–1041–04

39

–06

FD45–1041–06

40

–10

FD45–1041–10

41

–12

FD45–1041–12

42

–16

FD45–1041–16

43

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

42

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

FD45 Stainless Steel Male Half Female SAE O-Ring/Valved

Coupling Thread Dimensional Data 1 Size Size (P) A B –06

3/ -16 4

2.04

1.06

Part Number Buna-N

Line Ref.

FD45–1417-08-06

1 2 3 4 5 6 7 8

*Fryer Coupling/Female Half Female Half Female Silicone FemalePipe/Valved SAE O-Ring/Valved Collar on Ball Release Sleeve

–06

3/ -16 4

2.45

1.06

FD45–1411-08-06

9 10 11 12 13 14 15 16

*Fryer Coupling/Male Half Female Pipe/Valved

–10

1/ -14 2

1.92

1.06

FD45–1270–08–10

17 18 19 20 21 22 23 24

*Fryer Coupling/Female Half Female Pipe/Valved Silicone Collar on Ball Release Sleeve

–10

1/ -14 2

2.86

2.38 1.31

FD45–1267–08–10

25 26 27 28 29 30 31 32

*Special internal Viton seal material approved for use by the National Sanitation Foundation. The fryer coupling uses a silicone collar aiding disconnection with hot fluid applications.

Connecting and disconnecting lines between deep fat fryers and oil recycling units has been made cleaner, safer and quicker with Eaton’s new FD45 “Fryer” coupling. Eaton’s FD45 “Fryer” coupling is made of stainless steel with Viton* seal material. It has a silicone rubber collar on the sleeve of the female half to provide insulation from high oil temperatures and an excellent gripping surface during connection and disconnection. The coupling has been approved for use by the National Sanitation Foundation.

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

43

FLUID TRANSFER & HYDRAULIC

FD48 Series/Parker Bruning—SM Interchange

The FD48 Series coupling is designed to interchange with Parker Bruning SM-250 couplings.

Flow Data

poppet valves provide excellent high and • Self-sealing low pressure sealing.

Pressure Drop Versus Flow Graph

™ ball latch design allows quick and easy • PUSH-PULL connection and disconnection of fluid lines.

50 45 40 35 30

and plated steel for wear and • Heat-treated corrosion resistance.

QUICK DISCONNECT COUPLINGS

25 20

Pressure Drop In PSI

• 3,000 psi operating pressure. • Standard seal material – Buna-N. seal material – Zinc plated steel with zinc • Standard poppet guides.

15 10 9 8 7 6 5 4 3

2

1

1

2

3

4

5 6 7 8 9 10

15

20 25 30 35 40 50 60

80 100

Gallons Per Minute Flow (Test Fluid MIL-H-5606 Hydraulic Oil At 100˚F.)

Physical Characteristics Maximum Minimum Operating Burst Coupling Pressure Pressure Vacuum Size (psi) (psi) (in./Hg.)

-04

3,000

12,000

28

Rated Air Fluid Flow Inclusion Loss (gpm) (cc. max.) (cc. max.)

3

0.50

1.10

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

44

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

FD48 Series Male Half Female Pipe/Valved

Coupling Thread Size Size (P) –04

1/ -18 4

Dimensional Data 1 A B 1.45

.75

Part Number Buna-N FD48–1002–04–04

Line Ref. 1 2 3 4 5 6 7 8

Female Half Female Pipe/Valved

–04

1/ -18 4

2.01

1.06

.81

FD48–1001–04–04

9 10 11 12 13 14 15 16

Complete Coupling Female Pipe/Valved

–04

1/ -18 4

2.69

FD48–1000–04–04

17 18 19 20 21 22 23 24

Accessories Dust Cap/Plug (Fits both male and female halves)

25 –04

FD48–1042–04

26 27 28 29 30 31 32

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

45

FLUID TRANSFER & HYDRAULIC

FD49 Series/HTMA Flush Face, Hydraulic Tool

The FD49 Series meets NFPA standard T3.20.15, which was developed in conjuction with HTMA (Hydraulic Tool Manufacturer’s Association). Twin-Guard™ sealing system prevents weepage and allows connection and disconnection against pressure up to 500 psi. Dual flush face valving for minimal fluid loss and air inclusion. Tubular valve and sleeve construction for high fluid flow with low pressure drop. Push-to-connect latching for one hand operation. Standard seal material – Teflon channel seal and Buna-N O-Ring backup. Standard body material – Zinc plated steel.

Flow Data

QUICK DISCONNECT COUPLINGS

• • • • •

Our patented* Twin-Guard™ seal system consists of channel and Buna-N O-Ring seals. The channel seal prevents blowout during connection and disconnection under pressure to 500 psi. The Buna-N ORing seal is a secondary seal eliminating fluid weepage. *Patent Number 5123446

Physical Characteristics Maximum Minimum Operating Burst Coupling Pressure Pressure Vacuum Size (psi) (psi) (in./Hg.)

–06

3,000

9,000

28

Rated Air Fluid Flow Inclusion Loss (gpm) (cc. max.) (cc. max.)

10

.01

.02

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

46

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

FD49 Series Male Half Female Pipe/Valved

Dimensional Data A B 1

Part Number Buna-N

Coupling Size

Thread Size (P)

–06

3/ -18 8

2.62

1.00

FD49–1002–06–06

–06

1/ -14 2

2.75

1.06

FD49–1002–08–06

2

Line Ref. 1 2 3 4 5 6 7 8

Male Half Female SAE O-Ring/Valved

–06

9/ -18 16

2.79

1.06

FD49–1004–06–06

9

–06

3/ -16 4

2.75

1.00

FD49–1004–08–06

10 11 12 13 14 15 16

Male Half Male SAE O-Ring/Valved

–06

9/ -18 16

2.99

1.00

FD49–1057–06–06

17

–06

3/ -16 4

2.99

1.00

FD49–1057–08–06

18 19 20 21 22 23 24

Female Half Female Pipe/Valved

–06

3/ -18 8

2.74

1.20

–06

1/ -14 2

2.85

1.20

1.00

1.06

FD49–1001–06–06

25

1.06

FD49–1001–08–06

26 27 28 29 30 31 32

Female Half Female SAE O-Ring/Valved

–06

3/ -16 4

2.82

1.20

1.06

FD49–1005–08–06

33 34 35 36 37 38 39 40

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

47

FLUID TRANSFER & HYDRAULIC

FD49 Series Female Half Male SAE O-Ring/Valved

Coupling Thread Size Size (P)

Dimensional Data 2 1 A B

Part Number Buna-N

–06

9/ -18 16

3.22

1.20 1.00 1.06

FD49–1014–06–06

–06

3/ -16 4

3.28

1.20 1.00 1.06

FD49–1014–08–06

Line Ref. 1 2 3 4 5 6 7 8

Female Half/Heavy Duty Sleeve Female Pipe/Valved

–06

3/ -18 8

2.74

1.40 1.00 1.06

FD49–1200–06–06

–06

1/ -14 2

2.85

1.40

FD49–1200–08–06

1.06

9 10 11 12 13 14 15 16

Accessories

17

Dust Cover For Standard Coupling

19

18 –06

FD49–1042–06

20 21

QUICK DISCONNECT COUPLINGS

22 23 24 25 26 27 Dust Cover For Heavy Duty Coupling

–06

FD49–1088–06

28 29 30 31 32 33 34 35

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

48

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

5100 Series/Low Spill—Connect Under Pressure

The 5100 Series brass coupling with steel tubular valve offers minimum air inclusion and fluid loss. Thread together latch provides connect under pressure capability and vibration resistance. It is not rated for continuous hydraulic impulse applications. (See FD86 on page 69.) Tubular valve construction for virtually no fluid loss during disconnection, reduces environmental and worker safety hazards. Low air inclusion during connection maintains system performance. Available with wing or hex nut configurations. Connect against pressure capability allows connecting of halves even when pressurized up to 500 psi. Steel flange available for accessible bulkhead mounting. Standard seal material – Buna-N. Standard body material – Brass with steel valving components, hex and wing nuts.

Flow Data

• • • • • • •

Physical Characteristics Coupling Dash Size

Coupling Interface Size

Maximum Operating Pressure* (psi connected)

–4 –6 –8 –10 –12 –16 –20 –24

–4 –8 –8 –12 –12 –16 –20 –24

3000 3000 3000 3000 3000 3000 2750 2500

Maximum Operating Pressure (psi disconnected) Male Half Female Half S2 and S4 S5 3000 3000 3000 3000 3000 3000 2500 2500

3000 3000 3000 3000 3000 3000 2750 2000

Vacuum (in./Hg.) 28 28 28 28 28 28 28 28

Rated Flow (gpm) 4 7 7 18 18 40 75 100

Air Inclusion (cc max.)

Fluid Loss (cc max.)

.03 .05 .05 .14 .34 .50 .68 .60

.01 .06 .10 .10 .26 .35 .70 .94

*Minimum burst pressure is equal to three times the maximum operating pressure. Not recommended for continuous hydraulic impulse applications at maximum operating pressures.

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

49

FLUID TRANSFER & HYDRAULIC

For component part number breakdown and service instructions, request bulletin JB41.

5100 Series Male Half/Less Flange Female Pipe

Male Half/With Flange Female Pipe

Female Half/Wing Nut Female Pipe

Female Half/Hex Nut Female Pipe

Complete Coupling Less Flange/With Wing Nut/ Female Pipe

Coupling Thread Size Size (P)

Part Number

Dimensional Data A

B

1

2

Buna-N

Viton

EPR

Line Ref.

–4

1/ -27 8

1.88

.90

.69

5100–S2–4B

1

–6

1/ -18 4

2.58 1.07

.94

5100–S2–6B

2

–8

3/ -18 8

2.58 1.07

.94

5100–S2–8B

3

–10

1/ -14 2

3.11 1.38 1.19

5100–S2–10B

4

–12

3/ -14 4

3.11 1.38 1.19

5100–S2–12B

5

–16

1-111/2

3.55 1.76 1.56

5100–S2–16B

6

–20

11/4-111/2 3.71 2.10 1.88

5100–S2–20B

7

–24

11/2-111/2 4.12 2.48 2.19

5100–S2–24B

8

–4

1/ -27 8

1.88

.94

5100–S4–4B

9

–6

1/ -18 4

2.58 1.07 1.12

5100–S4–6B

10

.90

–8

3/ -18 8

2.58 1.07 1.12

5100–S4–8B

11

–10

1/ -14 2

3.11 1.38 1.62

5100–S4–10B

12

–12

3/ -14 4

3.11 1.38 1.62

5100–S4–12B

13

–16

1-111/2

3.55 1.76 1.88

5100–S4–16B

14

–20

11/4-111/2 3.71 2.10 2.12

5100–S4–20B

15

–24

11/2-111/2 4.12 2.48 2.50

5100–S4–24B

16

–4

1/ -27 8

1.97 3.03

.56

5100–S5–4B

17

–6

1/ -18 4

2.37 3.44

.76

5100–S5–6B

18

–8

3/ -18 8

2.37 3.44

.76

5100–S5–8B

19

–10

1/ -14 2

3.09 4.06 1.16

5100–S5–10B

20

–12

3/ -14 4

3.09 4.06 1.16

5100–S5–12B

21

–16

1-111/2

3.67 4.38 1.44

5100–S5–16B

22

–20

11/4-111/2 3.98 5.19 1.78

5100–S5–20B

23

–24

11/2-111/2 4.02 5.31 2.00

5100–S5–24B

24

–4

1/ -27 8

2.10 1.32

.56 1.19

5110–S5–4B

25

–6

1/ -18 4

2.40 1.53

.76 1.38

5110–S5–6B

26

–8

3/ -18 8

2.40 1.53

.76 1.38

5110–S5–8B

27

–10

1/ -14 2

3.07 1.98 1.16 1.75

5110–S5–10B

28

–12

3/ -14 4

3.07 1.98 1.16 1.75

5110–S5–12B

29

–16

1-111/2

3.68 2.41 1.44 2.12

5110–S5–16B

30

–20

11/4-111/2 4.00 2.81 1.78 2.50

5110–S5–20B

31

–24

11/2-111/2 4.10 3.10 2.00 2.75

5110–S5–24B

32

–4

1/ -27 8

3.20

5101–4B

33

–6

1/ -18 4

4.11

5101–6B

34

–8

3/ -18 8

4.11

5101–8B

35

–10

1/ -14 2

5.21

5101–10B

36

–12

3/ -14 4

5.21

5101–12B

37

–16

1-111/2

5.98

5101–16B

38

–20

11/4-111/2 6.31

5101–20B

39

–24

11/2-111/2 6.52

5101–24B

40 41

Repair Kit

–4

FF098–04

Each kit will repair male and female halves.

–6, –8

FF098–08

42

–10, –12

FF098–12

43

–16

FF098–16

44

–20

FF098–20

45

–24

FF098–24

46

QUICK DISCONNECT COUPLINGS

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

50

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™ For component part number breakdown and service instructions, request bulletin JB41.

5100 Series Complete Coupling With Flange/With Wing Nut/ Female Pipe

Complete Coupling Less Flange/With Hex Nut/ Female Pipe

Complete Coupling With Flange/With Hex Nut/ Female Pipe

Repair Kit Each kit will repair male and female halves.

Coupling Thread Size Size (P)

A

B

2

Buna-N

Viton

EPR

Line Ref.

1/ -27 8

3.24

5100–4B

1

–6

1/ -18 4

4.11

5100–6B

2

–8

3/ -18 8

4.11

5100–8B

3

–10

1/ -14 2

5.21

5100–10B

4

–12

3/ -14 4

5.21

5100–12B

5

–16

1-111/2

5.99

5100–16B

6

–20

11/4-111/2 6.33

5100–20B

7

–24

11/2-111/2 6.54

5100–24B

8

–4

1/ -27 8

3.20

5111–4B

9

–6

1/ -18 4

4.11

5111–6B

10

–8

3/ -18 8

4.11

5111–8B

11

–10

1/ -14 2

5.21

5111–10B

12

–12

3/ -14 4

5.21

5111–12B

13

–16

1-111/2

5.98

5111–16B

14

–20

11/4-111/2 6.31

5111–20B

15

–24

11/2–-111/2 6.52

5111–24B

16

–4

1/ -27 8

3.20

5110–4B

17

–6

1/ -18 4

4.11

5110–6B

18

–8

3/ -18 8

4.11

5110–8B

19

–10

1/ -14 2

5.21

5110–10B

20

–12

3/ -14 4

5.21

5110–12B

21

–16

1-111/2

5.98

5110–16B

22

–20

11/4-111/2 6.31

5110–20B

23

–24

11/2-111/2 6.52

5110–24B

24

–4

FF098–04

25

–6, –8

FF098–08

26

–10, –12

FF098–12

27

–16

FF098–16

28

–20

FF098–20

29

–24 Dust Plug with Chain**

1

–4

FF098–24

Accessories Dust Cap with Chain**

Part Number

Dimensional Data

Dust Cap with Chain

30 Dust Plug with Chain

6 Bolt Flange

31

–4

5100–S7–5

5100–S9–5

32

–6, –8

5100–S7–8

5100–S9–8

33

–10, –12

5100–S7–12

5100–S9–12

34

–16

5100–S7–16

5100–S9–16

35

–20

5100–S7–20

5100–S9–20

36

–24

5100–S7–24

5100–S9–24

37 38 39

6 Bolt Flange*

–4

.201

1.44

150–22–5

40

–6, –8

.201

1.69

150–22–8

41

–10, –12

.201

2.12

150–22–12

42

–16

.201

2.38

150–22–16

43

–20

.201

2.62

150–22–20

44

–24

.201

3.25

5100–22–24S

45

*6 Bolt Flange-holes equally spaced. (See “A” for bolt hole diameter, and “B” for bolt circle diameter). **To order caps and plugs without chain, order cap by part number 5100-32-(size) and plug by part number 5100-41-(size).

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

51

FLUID TRANSFER & REFRIGERANT

5400 Series/Low Air Inclusion Refrigerant

• • • • • • •

Flow Data Pressure Drop Versus Flow Graphic

Pressure Drop in PSI

The 5400 Series is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Brazed or threaded end connections for versatility of installation on tubing or hose. Tubular valve construction for low fluid loss and air inclusion. Thread together design allows connection and disconnection against pressure. Lock washer and jam nut standard for optional bulkhead mounting. Standard seal material – Neoprene. Standard adapter material – Steel or Brass. Standard body material – Zinc plated steel.

QUICK DISCONNECT COUPLINGS

Gallons Per Minute Flow (Test Fluid MIL-H-5606 Hydraulic Oil At 100° F)

Physical Characteristics Coupling Dash Size –4 –8 –12 –16

Maxium Operating Pressure (psi connected) 3000 1750 700 700

Minimum Burst Pressure (psi connected) 9000 5200 2100 2100

Maximum Operating Pressure (psi disconnected) Male Half 2500 1750 800 700

Female Half 500 400 400 300

Vacuum (in./Hg.) 28 28 28 28

Rated Flow (gpm) 2 14 35 75

Air Fluid Inclusion Loss (cc max.) (cc max.) .10 .05 .10 .10 .30 .10 .50 .20

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

52

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & REFRIGERANT ™

5400 Series Male Half No Adapter

Coupling Thread Tube Size Size (P) O.D. Size

Part Number

Dimensional Data B

–4

1.08

.83

.75

5400–S2–4

1

–8

1.37 1.25

1.13

5400–S2–8

2

–12

1.74 1.83

1.63

5400–S2–12

3

–16

1.83 2.10

1.88

5400–S2–16

1

2

3

Neoprene

Line Ref.

A

4 5 6 7 8

Female Half No adapter

–4

1.13

.83

.63

.75

5400–S5–4

9

–8

1.63 1.31

1.00

1.19

5400–S5–8

10

–12

2.15 1.80

1.38

1.63

5400–S5–12

11

–16

2.37 2.24

1.75

2.00

5400–S5–16

12 13 14 15 16

Male Half SAE 37° (JIC)

–4

7/ -20 16

1.88

.83

.75

.63

5410–S17–4–4*

17

–4

9/ -18 16

1.89

.83

.75

.63

5410–S17–6–4*

18

–8

9/ -18 16

2.18 1.25

1.13

1.00

5410–S17–6–8*

19

–8

3/ -16 4

2.28 1.25

1.13

1.00

5410–S17–8–8*

20

–12

7/ -14 8

2.75 1.83

1.63

1.38

5410–S17–10–12*

21

–12

11/16-12

2.86 1.83

1.63

1.38

5410–S17–12–12*

22

–16

15/16-12

2.99 2.10

1.88

1.75

5410–S17–16–16*

23

–4

7/ -20 16

1.93

.83

5410–S14–4–4*

25

24 Female Half SAE 37° (JIC)

.63

.75

.63

–4

9/ -18 16

1.94

.83

.63

.75

.63

5410–S14–6–4*

26

–8

9/ -18 16

2.43 1.31

1.00

1.19

1.00

5410–S14–6–8*

27

–8

3/ -16 4

2.53 1.31

1.00

1.19

1.00

5410–S14–8–8*

28

–12

7/ -14 8

3.16 1.80

1.38

1.63

1.38

5410–S14–10–12*

29

–12

11/16-12

3.27 1.80

1.38

1.63

1.38

5410–S14–12–12*

30

–16

15/16-12

3.53 2.24

1.75

2.00

1.75

5410–S14–16–16*

31

–4

7/ -20 16

3.54

5410–4–4*

33

–4

9/ -18 16

3.56

5410–6–4*

34

–8

9/ -18 16

4.23

5410–6–8*

35

–8

3/ -16 4

4.44

5410–8–8*

36

–12

7/ -14 8

5.33

5410–10–12*

37

–12

11/16-12

5.54

5410–12–12*

38

–16

15/16-12

5.89

5410–16–16*

39

32 Complete Coupling SAE 37° (JIC)

40 Male Half Braze Tubing Adapter

–4

1/

1.52

.83

.75

.63

5401–S17–4–4*

41

–4

3/

1.52

.83

.75

.63

5401–S17–6–4*

42

–8

3/

1.75 1.31

1.13

1.00

5401–S17–6–8*

43

–8

1/

1.75 1.31

1.13

1.00

5401–S17–8–8*

44

–12

5/

2.47 1.80

1.63

1.38

5401–S17–10–12*

45

–12

3/

2.47 1.80

1.63

1.38

5401–S17–12–12*

46

–16

1

2.80 2.24

1.88

1.75

5401–S17–16–16*

47

4 8 8 2 8 4

* Couplings must be ordered by components as shown on page 55 This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

53

FLUID TRANSFER & REFRIGERANT

5400 Series Female Half Braze Tubing Adapter

Coupling Thread Tube Size Size (P) O.D. Size A 1/ –4 1.57 4

.63

Part Number Neoprene 5401–S14–4–4*

–4

3/

1.57

.83

.63

.75

.63

5401–S14–6–4*

2

–8

3/

2.00

1.31

1.00

1.19

1.00

5401–S14–6–8*

3

–8

1/

2.00

1.31

1.00

1.19

1.00

5401–S14–8–8*

4

–12

5/

2.88

1.80

1.38

1.63

1.38

5401–S14–10–12*

5

–12

3/

2.88

1.80

1.38

1.63

1.38

5401–S14–12–12*

6

–16

1

3.34

2.24

1.75

2.00

1.75

5401–S14–16–16*

7

8 8 2 8 4

Dimensional Data 2 1 B .83 .63 .75

3

Line Ref. 1

8 Dust Cap with Gasket

Dust Plug with Gasket

9

–4

5400–S6–4

5400–S8–4

10

Accessories Dust Cap

Dust Plug

–8

5400–S6–8

5400–S8–8

11

–12

5400–S6–12

5400–S8–12

12

–16

5400–S6–16

5400–S8–16

13 14 15 16 17

Adapter SAE 37° (JIC)

Adapter–Braze

O-Ring Required

Hose Fitting SAE 100R5†

O-Ring Required

O-Ring

Brass

Steel

18

–4

7/ -20 16

1/

22546–12

202220–4–4B

202220–4–4S

19

–4

9/ -18 16

3/

22546–12

202220–6–4B

202220–6–4S

20

–8

9/ -18 16

3/

22546–17

202220–6–8B

202220–6–8S

21

–8

3/ -16 4

1/

22546–17

202220–8–8B

202220–8–8S

22

–12

7/ -14 8

5/

22546–23

202220–10–12B

202220–10–12S

23

–12

11/16-12

3/

22546–23

202220–12–12B

202220–12–12S

24

–16

13/16-12

1

22546–28

202220–16–16B

202220–16–16S

25

–4

1/ -20 2

1/

22546–12

202208–4–4B

26

–8

7/ -20 8

1/

22546–17

202208–4–8B

27

–4

1/ -20 2

3/

22546–12

202208–6–4B

28

–8

7/ -20 8

3/

22546–17

202208–6–8B

29

–8

7/ -20 8

1/

22546–17

202208–8–8B

30

–8

7/ -20 8

5/

22546–17

202208–10–8B

31

–12

11/4-18

5/

22546–23

202208–10–12B

32

–12

11/4-18

3/

22546–23

202208–12–12B

33

–16

11/4-18

7/

22546–23

202208–14–12B

34 35

4 8 8 2 8 4

4 2 8 8 2 8 8 4 8

–16

119/

32-20

7/

22546–28

202208–14–16B

–16

119/32-20

1

22546–28

202208–16–16B

36

–16

119/32-20

11/8

22546–28

202208–18–16B

37

–16

119/32-20

11/4 Hose Size

22546–28

202208–22–16B

38

D

–4

1/ -20 2

–4

.92

22546–12

487–4–4S

40

–4

1/ -20 2

–6

.96

22546–12

487–4–6S

41

–8

7/ -20 8

–6

.96

22546–17

487–8–6S

42

–8

7/ -20 8

–8

1.06

22546–17

487–8–8S

43

–12

11/4-18

–10

1.07

22546–23

487–12–10S

44

–16

119/32-20

–16

1.01

22546–28

487–16–16S

45

8

QUICK DISCONNECT COUPLINGS

39

†Additional dash styles available.

* Couplings must be ordered by components as shown on page 55

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

54

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & REFRIGERANT ™

For Assemblies, Order by Components as Shown by Base Number and dash (-) size below 202208-Brass Assembly 5400-S2 5400-S5 Braze-On Part Number Female Half Quantity Male Half Quantity Adapter Quantity 5401-S14-10-12 -12 1 -10 -12B 1 5401-S14-10-8 -8 1 -10 -8B 5401-S14-12-12 -12 1 -12 -12B 1 5401-S14-16-16 -16 1 -16 -16B 1 5401-S14-4-4 -4 1 -4 -4B 1 5401-S14-6-4 -4 1 -6 -4B 1 5401-S14-6-8 -8 1 -6 -8B 1 5401-S14-8-8 -8 1 -8 -8B 1 5401-S17-10-12 -12 1 -10 -12B 1 5401-S17-10-8 -8 1 -10 -8B 1 5401-S17-12-12 -12 1 -12 -12 1 5401-S17-14-16 -16 1 -16 -16 1 5401-S17-4-4 -4 1 -4 -4B 1 5401-S17-6-4 -4 1 -6 -4B 1 5401-S17-6-8 -8 1 -6 -8B 1 5401-S17-8-8 -8 1 -8 -8B 1 5410-12-12 -12 1 -12 1 5410-16-16 -16 1 -16 1 5410-4-4 -4 1 -4 1 5410-6-8 -8 1 -8 1 5410-8-8 -8 1 -8 1 5410-S14-10-12 -12 1 5410-S14-12-12 -12 1 5410-S14-16-16 -16 1 5410-S14-4-4 -4 1 5410-S14-6-4 -4 1 5410-S14-6-8 -8 1 5410-S14-8-8 -8 1 5410-S17-10-12 -12 1 5410-S17-12-12 -12 1 5410-S17-16-16 -16 1 5410-S17-4-4 -4 1 5410-S17-6-4 -4 1 5410-S17-6-8 -8 1 5410-S17-8-8 -8 1

202220-Steel 37˚ SAE Adapter Quantity

-12 -12S -16 -16S -4 -4S -6 -8S -8 -8S -10 -12S -12 -12S -16 -16S -4 -4S -6 -4S -6 -8S -8 -8S -10 -12S -12 -12S -16 -16S -4 -4S -6 -4S -6 -8S -8 -8S

2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1

22546 O-ring -23 -17 -23 -28 -12 -12 -17 -17 -23 -17 -23 -28 -17 -12 -17 -17 -23 -28 -12 -17 -17 -23 -23 -28 -12 -12 -17 -17 -23 -23 -28 -12 -12 -17 -17

Quantity 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Example, if a 5401-S14-10-12 is required, order as components, (1) 5400-S5-12, (1) 202208-10-12B Adapter and (1) 22546-23 O-Ring

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

55

FLUID TRANSFER & REFRIGERANT

Assembly Instructions/Component Part Numbers

Typical Male Coupling Half (S2)

Typical Female Coupling Half (S5)

Assembly Instructions Steps: 1. After tubing or hose has been connected to adapters 1 and 12 , install O-Rings 2 and 11 † on adapters. Be sure O-Rings are not twisted. 2. Oil O-Rings 2 and 11 liberally with system fluid to prevent them from scuffing and tearing when coupling body is threaded on adapter. 3. S2 Half—Lubricate poppet face with system fluid. Insert poppet valve assembly 3 into body 4 . Tighten body 4 on adapter 1 . After body and adapter make metal-to-metal contact, tighten by rotating body 4 1/8” with respect to adapter 1 o r torque per table value. S5 Half—Oil O-Ring 9 † liberally with system fluid. Insert valve and sleeve assembly 10 into body 8 . Tighten body 8 on adapter 12 . After body and adapter make metal-to-metal contact, tighten by rotating body 8 1/8” with respect to adapter 12 or torque per table value. 4. Coupling Connection—Lubricate gasket seal 5 on 5400-S2 half with system fluid. Thread union nut 8 on 5400-S2 half. Tighten union nut to torque values shown in Table. Be sure S2 and S5 bodies do not rotate during connection.

Bulkhead Mounting––S2 Half Install lock washer 6 on S2 half. Insert S2 half through bulkhead, and tighten jam nut 7 so that lock washer teeth are fully compressed. NOTE: Lock washer 6 must be between hex of S2 half and bulkhead.

Maximum Bulkhead Thickness Coupling Size –4 –8 –12 –16

Lock Washer Installed .206 .136 .232 .101

Lock Washer Not Used .256 .203 .292 .161

QUICK DISCONNECT COUPLINGS

Torque Values Recommended torque values in ft. lbs., are listed below. Dash Size –4 –8 –12 –16

Adapter to Body Braze Type Non-braze Type or Aluminum Steel or Brass 6–8 12–15 15–20 35–45 35–40 45–55 50–60 55–65

S2 Half to S5 Half 10–12 35–37 45–47 65–67

†IMPORTANT: Generous lubrication is required for all gaskets and O-Rings. Use refrigeration oil only when used in refrigerant system.

Component Part Numbers Item No.

1 2 3 4 5 6 7 8 9 10 11 12

Dash Size O.D. Tube Size Typical Male Half Tubing Adapter O-Ring Poppet Valve Assembly Body Gasket Seal Lock Washer Jam Nut Typical Female Half Union Nut and Body Assembly O-Ring Valve and Sleeve Assembly O-Ring Tubing Adapter

–4

–8

–12

–16

1/ ”–3/ ” 4 8

1/ ”–5/ ” 4 8

5/ ”–7/ ” 8 8

7/ ”–13/ ” 8 8

202208–*–4 22546–12 5400–S20–4 5400–17–4 22008–4 5400–54–4S 5400–53–4S

202208–*–8 22546–17 5400–S20–8 5400–17–8 22008–8 5400–54–8S 5400–53–8S

202208–*–12 22546–23 5400–S20–12 5400–17–12 22008–12 5400–54–12S 5400–53–12S

202208–*–16 22546–28 5400–S20–16 5400–17–16 22008–16 5400–54–16S 5400–53–16S

5400–S16–4 22546–10 5400–S19–4 22546–12 202208–*–4

5400–S16–8 22546–112 5400–S19–8 22546–17 202208–*–8

5400–S16–12 22546–116 5400–S19–12 22546–23 202208–*–12

5400–S16–16 22546–214 5400–S19–16 22546–28 202208–*–16

Line Ref. 1 2 3 4 5 6 7 8 9 10 11 12 13 14

*Specify O.D. Tubing size of adapter required in 16th of an inch. Example: –4 coupling with 3/8” O.D. tubing is 6/16 or –6. Part number is then 202208–6–4.

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

56

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

5600 Series/Industrial Interchange (Series A)

The 5600 Series general purpose coupling features a PUSH-PULL™ latch and poppet valving in a low profile design. It is a favorite in North America and abroad. PUSH-PULL™ ball latch design allows quick and easy connection and disconnection of fluid lines. Self-sealing poppet valve provides excellent high and low pressure sealing. Conforms dimensionally to ISO standard 7241/1 Series A. Streamlined valving provides minimum pressure drop. Standard seal materials – Buna-N, EPR and Viton. Standard body material – Zinc plated steel with Zinc poppet guides. (Brass poppet guide in –04 size.)

Flow Data

• • • • • •

Physical Characteristics Maximum Minimum Operating Burst Air Fluid Coupling Pressure Pressure Vacuum Rated Flow Inclusion Loss Size (psi) (psi) (in./Hg.) (gpm) (cc. max.) (cc. max.)

–04 –06 –10 –12 –16

5,000 4,000 4,000 4,000 4,000

15,000 12,000 12,000 12,000 12,000

28 28 28 28 28

1 6 12 28 50

.50 1.5 2.8 10.0 14.2

.50 1.3 2.8 8.2 14.2

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

57

FLUID TRANSFER & HYDRAULIC

5600 Series Male Half Female Pipe/Valved

Female Half Female Pipe/Valved

Female Half Female Pipe/ Valved w/Sleeve Lock

Coupling Thread Size Size (P)

Dimensional Data 1 A B

Buna-N

Part Number Viton

EPR

Line Ref.

–04

1/ -27 8

1.17

.56

5602–2–4S

FD56–1062–02–04 5644–2–4S

1

–04

1/ -18 4

1.24

.75

5602–4–4S

FD56–1062–04–04 5644–4–4S

2

–06

3/ -18 8

1.40

.88

5602–6–6S

FD56–1062–06–06 5644–6–6S

3

–10

1/ -14 2

1.89

1.06

5602–8–10S

FD56–1062–08–10 5644–8–10S

4

–10

3/ -14 4

2.03

1.38

5602–12–10S

FD56–1062–12–10 5644–12–10S

5

–12

3/ -14 4

2.28

1.38

5602–12–12S

FD56–1062–12–12 5644–12–12S

6

–16

1-111/2

2.77

1.62

5602–16–16S

FD56–1062–16–16 5644–16–16S

7

–04

1/ -27 8

1.81

1.08

5601–2–4S

FD56–1064–02–04 5643–2–4S

9

–04

1/ -18 4

1.81

1.08

.88

5601–4–4S

FD56–1064–04–04 5643–4–4S

10

–06

3/ -18 8

2.15

1.23

1.00

5601–6–6S

FD56–1064–06–06 5643–6–6S

11

–10

1/ -14 2

2.61

1.50

1.19

5601–8–10S

FD56–1064–08–10 5643–8–10S

12

–10

3/ -14 4

2.61

1.50

1.31

5601–12–10S

FD56–1064–12–10 5643–12–10S

13

–12

3/ -14 4

3.25

1.81

1.50

5601–12–12S

FD56–1064–12–12 5643–12–12S

14

–16

1-111/2

3.82

2.10

1.69

5601–16–16S

FD56–1064–16–16 5643–16–16S

15

–06

3/ -18 8

2.15

1.23

1.00

FD56-1239-06-06

16

–10

1/ -14 2

2.61

1.50

1.19

FD56-1239-08-10

17

–10

3/ -14 4

2.61

1.50

1.31

FD56-1239-10-10

18

–12

3/ -14 4

3.25

1.81

1.50

FD56-1239-12-12

19

–16

1-111/2

3.82

2.10

1.69

FD56-1239-16-16

20

.88

21 22 Complete Coupling Female Pipe/Valved

Male Half/Female Pipe Non-Valved

–04

1/ -27 8

2.42

5600–2–4S

FD56–1065–02–04 5642–2–4S

23

–04

1/ -18 4

2.49

5600–4–4S

FD56–1065–04–04 5642–4–4S

24

–06

3/ -18 8

2.80

5600–6–6S

FD56–1065–06–06 5642–6–6S

25

–10

1/ -14 2

3.78

5600–8–10S

FD56–1065–08–10 5642–8–10S

26

–10

3/ -14 4

4.06

5600–12–10S

FD56–1065–12–10 5642–12–10S

27

–12

3/ -14 4

4.46

5600–12–12S

FD56–1065–12–12 5642–12–12S

28

–16

1-111/2

5.54

5600–16–16S

FD56–1065–16–16 5642–16–16S

29

–04

1/ -27 8

1.17

.56

FD56–1037–02–04 FD56–1037–02–04 FD56–1037–02–04

30

–04

1/ -18 4

1.24

.75

FD56–1037–04–04 FD56–1037–04–04 FD56–1037–04–04

31

–06

3/ -18 8

1.40

.88

FD56–1037–06–06 FD56–1037–06–06 FD56–1037–06–06

32

–10

1/ -14 2

1.89

1.06

FD56–1037–08–10 FD56–1037–08–10 FD56–1037–08–10

33

–10

3/ -14 4

2.03

1.38

FD56–1037–12–10 FD56–1037–12–10 FD56–1037–12–10

34

–12

3/ -14 4

2.28

1.38

FD56–1037–12–12 FD56–1037–12–12 FD56–1037–12–12

35

–16

1-111/2

2.77

1.62

FD56–1037–16–16 FD56–1037–16–16 FD56–1037–16–16

36

–04

1/ -27 8

1.81

1.08

.88

FD56–1225–02–04 FD56–1207–02–04 FD56–1204–02–04

37

–04

1/ -18 4

1.81

1.08

.88

FD56–1225–04–04 FD56–1207–04–04 FD56–1204–04–04

38

–06

3/ -18 8

2.15

1.23

1.00

FD56–1225–06–06 FD56–1207–06–06 FD56–1204–06–06

39

–10

1/ -14 2

2.61

1.50

1.19

FD56–1225–08–10 FD56–1207–08–10 FD56–1204–08–10

40

–10

3/ -14 4

2.61

1.50

1.31

FD56–1225–12–10 FD56–1207–12–10 FD56–1204–12–10

41

–12

3/ -14 4

3.25

1.81

1.50

FD56–1225–12–12 FD56–1207–12–12 FD56–1204–12–12

42

–16

1-111/2

3.82

2.10

1.69

FD56–1225–16–16 FD56–1207–16–16 FD56–1204–16–16

43

–04

FF082–04†

FF092–04†

FF093–04†

44

–06

FF082–06

FF092–06

FF093–06

45

–10

FF082–10

FF092–10

FF093–10

46

–12

FF082–12

FF092–12

FF093–12

47

–16

FF082–16

FF092–16

FF093–16

48

Will not operate with valved coupling halves. No valve actuator.

Female Half/Female Pipe Non-Valved

Will not operate with valved coupling halves. No valve actuator.

Repair Kit Each kit will repair one male or female half.

QUICK DISCONNECT COUPLINGS

†This size repair kit contains an interface seal and back-up ring. This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

58

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

Coupling Thread Size Size (P)

5600 Series Complete Coupling/Non–Valved Female Pipe

Dimensional Data 1 A B

Buna-N

Part Number Viton

EPR

Line Ref.

–04

1/ -27 8

2.42

FD56–1226–02–04 FD56–1208–02–04 FD56–1205–02–04

1

–04

1/ -18 4

2.49

FD56–1226–04–04 FD56–1208–04–04 FD56–1205–04–04

2

–06

3/ -18 8

2.80

FD56–1226–06–06 FD56–1208–06–06 FD56–1205–06–06

3

–10

1/ -14 2

3.78

FD56–1226–08–10 FD56–1208–08–10 FD56–1205–08–10

4

–10

3/ -14 4

4.06

FD56–1226–12–10 FD56–1208–12–10 FD56–1205–12–10

5

–12

3/ -14 4

4.46

FD56–1226–12–12 FD56–1208–12–12 FD56–1205–12–12

6

–16

1-111/2

5.54

FD56–1226–16–16 FD56–1208–16–16 FD56–1205–16–16

7

–04

1/ -27 8

1.17

.56

FD56–1125–02–04 FD56–1125–02–04 FD56–1125–02–04

9

–04

1/ -18 4

1.24

.75

FD56–1125–04–04 FD56–1125–04–04 FD56–1125–04–04

10

–06

3/ -18 8

1.40

.88

FD56–1125–06–06 FD56–1125–06–06 FD56–1125–06–06

11

–10

1/ -14 2

1.89

1.06

FD56–1125–08–10 FD56–1125–08–10 FD56–1125–08–10

12

–10

3/ -14 4

2.03

1.38

FD56–1125–12–10 FD56–1125–12–10 FD56–1125–12–10

13

–12

3/ -14 4

2.28

1.38

FD56–1125–12–12 FD56–1125–12–12 FD56–1125–12–12

14

–16

1-111/2

2.77

1.62

FD56–1125–16–16 FD56–1125–16–16 FD56–1125–16–16

15

–04

1/ -27 8

1.81

1.08

.88

FD56–1123–02–04 FD56–1201–02–04 FD56–1196–02–04

17

–04

1/ -18 4

1.81

1.08

.88

FD56–1123–04–04 FD56–1201–04–04 FD56–1196–04–04

18

–06

3/ -18 8

2.15

1.23

1.00

FD56–1123–06–06 FD56–1201–06–06 FD56–1196–06–06

19

–10

1/ -14 2

2.61

1.50

1.19

FD56–1123–08–10 FD56–1201–08–10 FD56–1196–08–10

20

–10

3/ -14 4

2.61

1.50

1.31

FD56–1123–12–10 FD56–1201–12–10 FD56–1196–12–10

21

–12

3/ -14 4

3.25

1.81

1.50

FD56–1123–12–12 FD56–1201–12–12 FD56–1196–12–12

22

–16

1-111/2

3.82

2.10

1.69

FD56–1123–16–16 FD56–1201–16–16 FD56–1196–16–16

23

–10

1/ -14 2

2.88

1.52

1.06

5651–8–10S

FD56–1070–08–10 565007–8–10S

–10

3/ -14 4

3.30

1.22

1.25

5651–12–10S

FD56–1070–12–10 565007–12–10S

8 Male Half/Female Pipe Pusher Style Valving

Incorporates a pusher device to open mating valved coupling halves.

16

Female Half/Female Pipe Pusher Style Valving

Incorporates a pusher device to open mating valved coupling halves.

24

Female Half/Female Pipe Connect Under Pressure Style

25 26 27 28 29 30 31 32

Complete Coupling/Female Pipe Connect Under Pressure Style

–10

1/ -14 2

3.89

5650–8–10S

FD56–1071–08–10 565006–8–10S

33

–10

3/ -14 4

4.45

5650–12–10S

FD56–1071–12–10 565006–12–10S

34 35 36 37 38 39 40

Repair Kit

41

Each kit will repair one male or female half.

† This size repair kit contains an interface seal and back-up ring.

–04

FF082–04†

FF092–04†

FF093–04†

42

–06

FF082–06

FF092–06

FF093–06

43

–10

FF082–10

FF092–10

FF093–10

44

–12

FF082–12

FF092–12

FF093–12

45

–16

FF082–16

FF092–16

FF093–16

46

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

59

FLUID TRANSFER & HYDRAULIC

5600 Series Male Half Female SAE O-Ring/Valved

Female Half Female SAE O-Ring/Valved

Female Half Female SAE O-Ring/ Valved w/Sleeve Lock

Coupling Thread Size Size (P)

Dimensional Data 1 A B

Buna-N

Part Number Viton

EPR

Line Ref.

–04

7/ -20 16

1.28

.62

5610–4–4S

FD56–1072–04–04 560078–4-4S

–06

9/ -18 16

1.50

.88

5610–6–6S

FD56–1072–06–06 560078–6–6S

2

–10

3/ -16 4

2.03

1.06

5610–8–10S

FD56–1072–08–10 560078–8–10S

3

–10

7/ -14 8

1

2.08

1.12

5610–10–10S

FD56–1072–10–10 560078–10–10S

4

–10

11/16-12 2.26

1.38

5610–12–10S

FD56–1072–12–10 560078–12–10S

5

–12

11/16-12 2.55

1.38

5610–12–12S

FD56–1072–12–12 560078–12–12S

6

–16

15/16-12 3.10

1.62

5610–16–16S

FD56–1072–16–16 560078–16–16S

7

–04

7/ -20 16

1.81

1.08

.88

5608–4–4S

FD56–1074–04–04 FD56–1012–04–04

9

–06

9/ -18 16

2.11

1.27

1.00

5608–6–6S

FD56–1074–06–06 FD56–1012–06–06

10

–10

3/ -16 4

2.76

1.52

1.19

5608–8–10S

FD56–1074–08–10 FD56–1012–08–10

11

–10

7/ -14 8

2.81

1.52

1.19

5608–10–10S

FD56–1074–10–10 FD56–1012–10–10

12

–10

11/16-12

3.00

1.52

1.31

5608–12–10S

FD56–1074–12–10 FD56–1012–12–10

13

–12

11/16-12 3.25

1.84

1.50

5608–12–12S

FD56–1074–12–12 FD56–1012–12–12

14

–16

15/16-12 3.83

2.15

1.88

5608–16–16S

FD56–1074–16–16 FD56–1012–16–16

15

–06

9/ -18 16

2.11

1.27

1.00

FD56-1270-06-06

16

–10

3/ -16 4

2.76

1.52

1.19

FD56-1270-08-10

17

–12

11/16-12 3.25

1.84

1.50

FD56-1270-12-12

18

–16

15/16-12 3.83

2.15

1.88

FD56-1270-16-16

19 20 21 22

Complete Coupling Female SAE O-Ring/Valved

Male Half Female SAE O-Ring/Non-Valved

Will not operate with valved coupling halves. No valve actuator.

Female Half Female SAE O-Ring/Non-Valved

Will not operate with valved coupling valves. No valve actuator.

Repair Kit Each kit will repair one male or female half.

† This size repair kit contains an interface seal and back-up ring.

–04

7/ -20 16

2.53

5606–4–4S

FD56–1075–04–04 FD56–1009–04–04

23

–06

9/ -18 16

2.84

5606–6–6S

FD56–1075–06–06 FD56–1009–06–06

24

–10

3/ -16 4

3.78

5606–8–10S

FD56–1075–08–10 FD56–1009–08–10

25

–10

7/ -14 8

3.88

5606–10–10S

FD56–1075–10–10 FD56–1009–10–10

26

–10

11/16-12 4.24

5606–12–10S

FD56–1075–12–10 FD56–1009–12–10

27

–12

11/16-12 4.46

5606–12–12S

FD56–1075–12–12 FD56–1009–12–12

28

–16

15/16-12

5.54

5606–16–16S

–04

7/ -20 16

1.21

–06

9/ -18 16

1.42

–10

3/ -16 4

1.89

–10

7/ -14 8

FD56–1075–16–16 FD56–1009–16–16

29

.62

FD56–1221–04–04 FD56–1221–04–04 FD56–1221–04–04

30

.73

.88

FD56–1221–06–06 FD56–1221–06–06 FD56–1221–06–06

31

1.02

1.06

FD56–1221–08–10 FD56–1221–08–10 FD56–1221–08–10

32

.72

1.94

1.07

1.12

FD56–1221–10–10 FD56–1221–10–10 FD56–1221–10–10

33

–10

11/16-12 2.12

1.24

1.38

FD56–1221–12–10 FD56–1221–12–10 FD56–1221–12–10

34

–12

11/16-12 2.28

1.21

1.38

FD56–1221–12–12 FD56–1221–12–12 FD56–1221–12–12

–16

15/16-12 2.77

1.45

1.62

FD56–1221–16–16 FD56–1221–16–16 FD56–1221–16–16

35 36 37

–04

7/ -20 16

1.81

1.08

.88

5691–4–4S

FD56–1233–04–04 FD56–1209–04–04

–06

9/ -18 16

2.11

1.27

1.06

5691–6–6S

FD56–1233–06–06 FD56–1209–06–06

38

–10

3/ -16 4

2.76

1.52

1.25

5691–8–10S

FD56–1233–08–10 FD56–1209–08–10

39

–10

7/ -14 8

2.81

1.52

1.25

5691–10–10S

FD56–1233–10–10 FD56–1209–10–10

40

–10

11/16-12

3.00

1.52

1.38

5691–12–10S

FD56–1233–12–10 FD56–1209–12–10

41

–12

11/16-12 3.25

1.84

1.50

5691–12–12S

FD56–1233–12–12 FD56–1209–12–12

42

–16

15/16-12 4.09

2.15

1.88

5691–16–16S

FD56–1233–16–16 FD56–1209–16–16

43

–04

FF082–04†

FF092–04†

FF093–04†

44

–06

FF082–06

FF092–06

FF093–06

45

–10

FF082–10

FF092–10

FF093–10

46

–12

FF082–12

FF092–12

FF093–12

47

–16

FF082–16

FF092–16

FF093–16

48

QUICK DISCONNECT COUPLINGS

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

60

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

5600 Series Complete Coupling Female SAE O-Ring/NonValved

Will not operate with valved coupling halves.

Female Half/Female SAE O-Ring Connect Under Pressure

Coupling Thread Dimensional Data 1 Size Size (P) A B

Buna-N

Part Number Viton

EPR

Line Ref.

–04

7/ -20 16

2.53

5690–4–4S

FD56–1234–04–04 FD56–1210–04–04

–06

9/ -18 16

2.84

5690–6–6S

FD56–1234–06–06 FD56–1210–06–06

2

–10

3/ -16 4

3.78

5690–8–10

FD56–1234–08–10 FD56–1210–08–10

3

–10

7/ -14 8

3.88

5690–10–10S

FD56–1234–10–10 FD56–1210–10–10

4

–10

11/16-12

4.24

5690–12–10S

FD56–1234–12–10 FD56–1210–12–10

5

–12

11/16-12 4.46

5690–12–12S

FD56–1234–12–12 FD56–1210–12–12

6

–16

15/16-12 5.54

5690–16–16S

FD56–1234–16–16 FD56–1210–16–16

1

7 8

–10

3/ -16 4

2.88 1.52 1.06

5668–8–10S

FD56–1081–8–10

–10

7/ -14 8

3.19 1.52 1.12

5668–10–10S

FD56–1081–10–10 565015–10–10S

11/16-12 3.38 1.52 1.38

5668–12–10S

FD56–1081–12–10 565015–12–10S

–10

565015–8–10S

9 10 11 12 13 14 15 16

Complete Coupling/Female SAE O-Ring Connect Under Pressure

–10

3/ -16 4

3.88

5667–8–10S

FD56–1082–8–10

–10

7/ -14 8

4.25

5667–10–10S

FD56–1082–10–10 565014–10–10S

11/16-12 4.62

5667–12–10S

FD56–1082–12–10 565014–12–10S

–10

565014–8–10S

17 18 19 20 21 22 23 24

Repair Kit Each kit will repair one male or female half.

†This size repair kit contains an interface seal and back-up ring.

25 –04

FF082–04†

FF092–04†

FF093–04†

26

–06

FF082–06

FF092–06

FF093–06

27

–10

FF082–10

FF092–10

FF093–10

28

–12

FF082–12

FF092–12

FF093–12

29

–16

FF082–16

FF092–16

FF093–16

Accessories Dust Cap

Dust Plug

Break Away Frame

30 31

–04

5657–4

32

–06

5657–6

33

–10

5657–10

34

–12

5657–12

35

–16

5657–16

36

–4

5659–4

37

–6

5659–6

38

–10

5659–10

39

–12

5659–12

40

–16

5659–16

41

–10

5603

42 43 44 45 46

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

61

WATER BLAST

FD69 Series/Arc Latch™—High Pressure Water Blast (10,000 psi)

The FD69 Series “Arc Latch™” design has a greater surface contact area for long service life in rugged highpressure and water blast applications. The maximum operating pressure is 10,000 psi with 40,000 psi minimum burst pressure. Safety sleeve lock guards against accidental disconnection. Smooth bore “straight through” design for high flow. Heavy duty back-up ring to prevent O-Ring extrusion. Available in plated steel and stainless steel for added corrosion resistance. Standard seal material – Buna-N. Standard body material – Zinc plated steel, Stainless steel.

Flow Data

• • • • • •

QUICK DISCONNECT COUPLINGS

Physical Characteristics Coupling Dash Size

–08

Maximum Minimum Operating Burst Air Fluid Pressure Pressure Vacuum Rated Flow Inclusion Loss (psi) (psi) (in./Hg.) (gpm) (cc. max.) (cc. max

10,000

40,000

28

45

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

62

QUICK DISCONNECT COUPLINGS

WATER BLAST

FD69 Series

Coupling Thread Thread Dimensional Data Size Size (P) Size(P1) A 1 B

Part Number Buna-N

Viton

EPR

Steel Male Half/Female Pipe

Line Ref.

1

–08

3/ -18 8

1.85 1.64 1.00 FD69–1002–06–08

FD69–1002–06–08 FD69–1002–06–08

2

–08

1/ -14 2

2.34 1.64 1.12 FD69–1002–08–08

FD69–1002–08–08 FD69–1002–08–08

3 4

Stainless Steel –08

1/ -14 2

5 2.34 1.64 1.12 FD69–1012–08–08

FD69–1012–08–08 FD69–1012–08–08

6 7 8

Steel Female Half/Female Pipe

9

–08

3/ -18 8

2.13 1.62 1.25 FD69–1001–06–08

FD69–1026–06–08 FD69–1028–06–08

10

–08

1/ -14 2

2.13 1.62 1.25 FD69–1001–08–08

FD69–1026–08–08 FD69–1028–08–08

11 12

Stainless Steel –08

1/ -14 2

13 2.13 1.62 1.25 FD69–1011–08–08

14 15 16

Complete Coupling Female Pipe

Steel

17

–08

1/ -14 2

1/ -14 2

3.43

FD69–1000–080808 FD69–1027–080808 FD69–1029–080808 18

–08

1/ -14 2

3/ -18 8

3.43

FD69–1000–080806 FD69–1027–080806 FD69–1029–080806 19

–08

3/ -18 8

1/ -14 2

2.94

FD69–1000–060808 FD69–1027–060808 FD69–1029–060808 20

–08

3/ -18 8

3/ -18 8

2.94

FD69–1000–060806 FD69–1027–060806 FD69–1029–060806 21

Stainless Steel –08

1/ -14 2

1/ -14 2

22 3.43

FD69–1010–080808

23 24

Repair Kit

Female Interface Seal Kit –08

25 FF10166

26

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

63

HYDRAULIC FARM

FD71 Series/Push-to-Connect Farm

• • • • •

Flow Data Pressure Drop versus Flow Graph

Pressure Drop in psi

The FD71 Series coupling is designed to interchange with male tips made to ISO 5675 specifications. It features one hand push-to-connect latching. The maximum operating pressure is 3,000 psi. Self-sealing poppet valve construction provides reliable leak-free service. Push-to-connect for one-hand operation when sleeve is mounted. Retaining ring groove on female half for bulkhead and break-away frame mounting. Standard seal material – Buna-N. Standard body material – Zinc plated steel with Zinc poppet guide.

QUICK DISCONNECT COUPLINGS

Gallons per Minute Flow

Physical Characteristics

(Test Fluid MIL-H-5606 Hydraulic Oil at 100°F)

Maximum Minimum Operating Burst Air Fluid Coupling Pressure Pressure Vacuum Rated Flow Inclusion Loss Size (psi) (psi) (in./Hg.) (gpm) (cc. max.) (cc. max.)

–10

3,000

12,000

28

16

2.8

2.8

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

64

QUICK DISCONNECT COUPLINGS

HYDRAULIC FARM ™

FD71 Series Male Half Female Pipe/Valved

Coupling Thread Size Size (P) –10

1/ -14 2

Dimensional Data A

B

C

D

Part Number E

2.05

1

1.06

Buna-N FD76–1002–08–10

Line Ref. 1 2 3 4 5 6 7 8

Female Half Female Pipe/Valved

–10

1/ -14 2

2.74

1.52

1.50

1.41

.20

1.00

FD71–1001–08–10

9 10 11 12 13 14 15 16

Accessories Dust Cap

17 –10

5657–10

18 19 20 21 22 23 24

Dust Plug

–10

5659–10

25 26 27 28 29 30 31 32

Break Away Frame

–10

5603

33 34 35 36 37 38 39 40

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

65

HYDRAULIC FARM

FD72 Series/Connect Under Pressure—Farm

The FD72 Series coupling incorporates special valving allowing connection to a male half under pressure (FD76 Series male). The maximum operating pressure is 3,000 psi.

Flow Data

travel, self-sealing poppet valve construction for • Over connecting to a pressurized male tip. Requires that the

QUICK DISCONNECT COUPLINGS

for one-hand operation when sleeve is • Push-to-connect mounted. • Interchanges with ISO 5675 male tips. ring groove on female half for bulkhead and • Retaining breakaway frame mounting. • Standard seal material – Buna-N. body material – Zinc plated steel with zinc • Standard poppet guide.

Pressure Drop in psi

tractor control valve be actuated to open the flow path and to equalize the pressure.

Physical Characteristics Maximum Minimum Operating Burst Rated Air Fluid Coupling Pressure Pressure Vacuum Flow Inclusion Loss

Size

(psi)

–10

3,000

(psi)

12,000

(in. Hg.)

28

(gpm)

16

(cc. max.) (cc. max.)

2.8

2.8

Gallons per Minute Flow (Test Fluid MIL-H-5606 Hydraulic Oil at 100°F)

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

66

QUICK DISCONNECT COUPLINGS

HYDRAULIC FARM ™

FD72 Series Male Half Female Pipe/Valved

Coupling Size

Thread Size (P)

A

–10

1/ -14 2

2.05

B

Dimensional Data C D E

1

Part Number Buna-N

Line Ref.

1.06

FD76–1002–08–10

1 2 3 4 5 6 7 8

Female Half Female Pipe/Valved

–10

1/ -14 2

3.17 1.52 1.50 1.41

.20 1.00

FD72–1001–08–10

9 10 11 13 14 15 16 17

Accessories Dust Cap

18 –10

5657-10

19 20 21 22 23 24

Dust Plug

–10

5659-10

25 26 27 28 29 30 31 32

Break Away Frame

–10

5603

33 34 35 36 37 38 39 40

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

67

HYDRAULIC FARM

FD70 & FD76 Series/Male Tip—Farm

FD70 Deere

FD76 ISO

to connect with female couplings on most • Designed older style John Deere farm equipment.

FD70 & FD76 Series Deere Male Half Female SAE O-Ring/Ball Valve

Coupling Size –10

Thread Size (P) 3/ -16 4

with ISO 5675 used on most farm trac• Interchanges tors found throughout North America and abroad.

Dimensional Data 1 A B 1.96

1.00

Part Number Buna-N FD70–1010–08–10

QUICK DISCONNECT COUPLINGS

Line Ref. 1 2 3 4 5 6 7 8

ISO Male Half Female Pipe/Poppet Valve

–10

1/ -14 2

2.05

1.06

FD76–1002–08–10

9 10 11 12 13 14 15 16

ISO Male Half Female SAE O-Ring/Poppet Valve

–10

3/ -16 4

2.05

1.00

FD76–1010–08–10

17 18 19 20 21 22 23 24

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

68

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

FD86 Series/5,000 PSI DryBreak—High Impulse

The FD86 Series is a thread together steel coupling offering dry break and high impulse technology and capabilities. The maximum operating pressure is 5,000 psi.

Flow Data

Tubular valve and sleeve construction for low fluid loss and air inclusion.

Thread together design using wing or hex nut allows connection and disconnection against pressures up to 750 psi.

Teflon* back-up rings along with secondary metalto-metal sealing contact provides high impulse capability up to 5,000 psi operating pressure.

Acme threads prevent galling and provide ease of connection.

Metal-to-metal sealing withstands +2,000°F for ten minutes with no fluid loss (requirement in California for oil field blow-out preventers).

• • •

Steel flange available for bulkhead mounting. Standard seal material – Buna-N. Standard body material – Zinc plated steel.

*Teflon is a registered trademark of Dupont.

Physical Characteristics Coupling Size

Maximum Operating Pressure (psi)

Minimum Burst Pressure (psi)

–16 –20

5,000 5,000

15,000 15,000

Air Fluid Vacuum Rated Flow Inclusion Loss (in./Hg.) (gpm) (cc. max.) (cc. max.)

28 28

50 75

2.90 4.61

.72 1.0

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

69

FLUID TRANSFER & HYDRAULIC

FD86 Series Male Half Female SAE O-Ring

Coupling Thread Dimensional Data 1 Size Size (P) A B

Buna-N

Part Number Viton

EPR

–16

15/16-12 4.03 2.11

1.75 FD86–1008–16–16 FD86–1043–16–16 FD86–1053–16–16

–20

15/8-12 4.16 2.48

2.25 FD86–1008–20–20 FD86–1043–20–20 FD86–1053–20–20

Line Ref. 1 2 3 4 5 6 7 8

Female Half Female SAE O-Ring/With Wing Nut

–16

15/16-12 4.62 4.50

1.62 FD86–1010–16–16 FD86–1044–16–16 FD86–1054–16–16

–20

15/8-12 5.22 5.25

2.00 FD86–1010–20–20 FD86–1044–20–20 FD86–1054–20–20 10

9 11 12 13 14 15 16

Female Half Female SAE O-Ring/With Hex Nut

–16

15/16-12 4.62 2.81

1.62 FD86–1006–16–16 FD86–1042–16–16 FD86–1052–16–16 17

–20

15/8-12 5.22 3.40

2.00 FD86–1006–20–20 FD86–1042–20–20 FD86–1052–20–20 18 19 20 21 22

QUICK DISCONNECT COUPLINGS

23 24

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

70

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

FD86 Series Male Half Female NPTF

Coupling Thread Dimensional Data 1 Size Size(P) A B 1-111/2

–16 –20

Part Number Buna-N

Viton

EPR

4.40

2.11 1.75 FD86–1002–16–16 FD86–1040–16–16 FD86–1050–16–16

11/4-111/2 4.43

2.48 2.25 FD86–1002–20–20 FD86–1040–20–20 FD86–1050–20–20

Line Ref. 1 2 3 4 5 6 7 8

Female Half Female NPTF/With Wing Nut

1-111/2

–16 –20

4.98

4.50 1.62 FD86–1001–16–16 FD86–1039–16–16 FD86–1049–16–16

9

11/4-111/2 5.62

5.25 2.00 FD86–1001–20–20 FD86–1039–20–20 FD86–1049–20–20

10 11 12 13 14 15 16

Female Half Female NPTF/With Hex Nut

1-111/2

–16 –20

4.98

2.81 1.62 FD86–1004–16–16 FD86–1041–16–16 FD86–1051–16–16

11/4-111/2 5.62

3.40 2.00 FD86–1004–20–20 FD86–1041–20–20 FD86–1051–20–20

17 18 19 20 21 22 23 24

Repair Kit

Male Half

26

–16

FF10596–16

FF10597–16

FF10598–16

27

–20

FF10596–20

FF10597–20

FF10598–20

28

–16

FF10593–16

FF10594–16

FF10595–16

30

–20

FF10593–20

FF10594–20

FF10595–20

31

Female Half

FD86 Series

Coupling Dash Size

29

Dimensional Size A

B

Part Number 6 Bolt Flange Assembly

Dust Plug with Chain

–16

FD86–1018–16

FD86–1016–16

2

–20

FD86–1018–20

FD86–1016–20

3

Accessories Dust Cap With Chain

Dust Plug With Chain

Line Ref.

Dust Cap with Chain

1

4 5 6 7 8 9 6 Bolt Flange Assembly*

–16

.19

2.98

FD86–1035–16

10

–20

.19

3.50

FD86–1035–20

11 12 13 14 15 16

*6 Bolt Flange-holes equally spaced. (See “A” for bolt hole diameter, and “B” for bolt circle diameter.)

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

71

FLUID TRANSFER & HYDRAULIC

FD89 Series/Flush-Face Couplings

Eaton’s NEW FD89 Series is specifically designed for those applications where quick and easy connections and no-spill performance are essential. Ideal for use where global interchangeability with other manufacturers is important. The FD89 Series is available in sizes from 1⁄4” through 2” to best meet your specific size requirements.

Meets dimensional requirements of ISO 16028 (1⁄4”-11⁄4”)

• • • •

Push-to-Connect Latching

Flow Data Pressure Drop Versus V Flow GPM 0.264 10

2.64

26.4

264

2642 145

QUICK DISCONNECT COUPLINGS

14.5

PSI

-20

-16

1

-32

-12

-24

-08

Interchangeable with HTMA couplings (3⁄8″)

BAR

-04

Safety Sleeve Lock

-06

Dual Flush-Face Valving

0.1 1

10

100

1000

1.45 10000

LPM

Physical Characteristics Maximum Operating ISO Coupling Pressure Size Size Connected PSI (BAR) 6,3 -04 4,350 (300) 10 -06 4,350 (300) 12,5 -08 3,625 (250) 16 -12 3,625 (250) 19 -16 3,625 (250) N/A -20 3,625 (250) N/A -24 2,900 (200) N/A -32 2,900 (200)

Maximum Operating Pressure Male Half PSI (BAR) 4,350 (300) 4,350 (300) 3,625 (250) 3,190 (220) 2,900 (200) 2,900 (200) 2,320 (160) 2,320 (160)

Maximum Operating Pressure Female Half PSI (BAR) 1,740 (120) 1,740 (120) 1,450 (100) 1,450 (100) 1,450 (100) 1,450 (100) 1,160 (80) 1,160 (80)

Minimum Burst Pressure Connected PSI (BAR) 17,400 (1,200) 17,400 (1,200) 14,500 (1,000) 14,500 (1,000) 14,500 (1,000) 14,500 (1,000) 11,600 (800) 11,600 (800)

Minimum Burst Pressure Male Half PSI (BAR) 17,400 (1,200) 17,400 (1,200) 14,500 (1,000) 12,760 (880) 11,600 (800) 11,600 (800) 9,280 (640) 9,280 (640)

Minimum Burst Pressure Rated Female Half Flow PSI (BAR) GPM (L/MIN) 6,960 (480) 3.2 (12) 6,960 (480) 6.1 (23) 5,800 (400) 11.9 (45) 5,800 (400) 19.5 (74) 5,800 (400) 26.4 (100) 5,800 (400) 49.9 (189) 4,640 (320) 76.1 (288) 4,640 (320) 100.0 (379)

Force To Fluid Air Connect Loss Inclusion (No Pressure) CC CC LBS (N) 0.006 0.005 40.2 (179) 0.012 0.280 38.9 (173) 0.020 0.040 40.7 (181) 0.026 0.270 43.8 (195) 0.032 0.040 50.4 (224) 0.010 0.140 68.3 (304) 0.050 0.980 96.0 (427) NA NA 110.0 (488)

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

72

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

Coupling Thread Size Size (P)

FD89 Series Male Half Female Pipe/Valved A

P

1

Female Half Female Pipe/Valved

A

B

P

1

P

1

Part Number Buna-N

Line Ref.

1.89 (47.9)

0.87 (22.0)

FD89-1002-04-01

1

-06

3/ -18 8

2.36 (60.0)

0.94 (24.0)

FD89-1002-06-06

2

-06

1/ -14 2

2.46 (62.5)

1.06 (27.0)

FD89-1002-08-06

3

-08

1⁄ -14 2

2.68 (68.0)

1.26 (32.0)

FD89-1002-08-08

4

-08

3⁄ -14 4

2.78 (70.5)

1.42 (36.0)

FD89-1002-12-08

5

-12

3⁄ -14 4

2.78 (70.5)

1.42 (36.0)

FD89-1002-12-12

6

-16

1-111⁄2

3.24 (82.3)

1.73 (45.0)

FD89-1002-16-16

7

-20

11⁄4-111⁄2

3.54 (89.8)

2.17 (55.0)

FD89-1002-20-20

8

-24

11⁄2-111⁄2 4.37 (111.0)

2.56 (65.0)

FD89-1002-24-24

9

-32

2-111⁄2

4.87 (123.8)

2.95 (75.0)

FD89-1002-32-32

10

-04

1/ -18 4

1.89 (48.1)

1.10 (28.0)

0.87 (22.0)

FD89-1001-04-04

11

-06

3/ -18 8

2.53 (64.2)

1.26 (32.0)

1.06 (27.0)

FD89-1001-06-06

12

-06

1⁄ -14 2

2.72 (69.2)

1.26 (32.0)

1.06 (27.0)

FD89-1001-08-06

13

-08

1⁄ -14 2

2.91 (73.8)

1.50 (38.0)

1.26 (32.0)

FD89-1001-08-08

14

-08

3⁄ -14 4

3.18 (80.8)

1.50 (38.0)

1.42 (36.0)

FD89-1001-12-08

15

-12

3⁄ -14 4

3.09 (78.5)

1.65 (42.0)

1.42 (36.0)

FD89-1001-12-12

16

-16

1-111⁄2

3.67 (93.2)

1.89 (48.0)

1.73 (45.0)

FD89-1001-16-16

17

-20

11/4-111⁄2

4.17 (106.0)

2.17 (55.0)

2.17 (55.0)

FD89-1001-20-20

18

-24

11⁄2-111⁄2 5.21 (132.4)

3.15 (80.0)

2.56 (65.0)

FD89-1001-24-24

19

6.17 (156.6) 3.94 (100.0) 3.15 (80.0)

FD89-1001-32-32

20

2-111⁄2 G

1⁄ 4

1.89 (47.9)

0.87 (22.0)

FD89-1007-04-04

21

-06

G

3⁄ 8

2.36 (60.0)

0.94 (24.0)

FD89-1007-06-06

22

-06

G

1⁄ 2

2.46 (62.5)

1.06 (27.0)

FD89-1007-08-06

23

-08

G

1⁄ 2

2.68 (68.0)

1.26 (32.0)

FD89-1007-08-08

24

-08

G

3⁄ 4

2.78 (70.5)

1.42 (36.0)

FD89-1007-12-08

25

-12

G

3⁄ 4

2.78 (70.5)

1.42 (36.0)

FD89-1007-12-12

26

-16

G1

3.24 (82.3)

1.73 (45.0)

FD89-1007-16-16

27

-20

G 11⁄4

3.54 (89.8)

2.17 (55.0)

FD89-1007-20-20

28

-24

G 11⁄2

4.37 (111.0)

2.56 (65.0)

FD89-1007-24-24

29

4.87 (123.8)

-32

G2

2.95 (75.0)

FD89-1007-32-32

30

Female Half Female BSP/Valved

-04

G

1⁄ 4

1.89 (48.1)

1.10 (28.0)

0.87 (22.0)

FD89-1006-04-04

31

-06

G

3⁄ 8

2.53 (64.2)

1.26 (32.0)

1.06 (27.0)

FD89-1006-06-06

32

A

-06

G

1⁄ 2

2.72 (69.2)

1.26 (32.0)

1.06 (27.0)

FD89-1006-08-06

33

-08

G

1⁄ 2

2.91 (73.8)

1.50 (38.0)

1.26 (32.0)

FD89-1006-08-08

34

-08

G

3⁄ 4

3.18 (80.8)

1.50 (38.0)

1.42 (36.0)

FD89-1006-12-08

35

-12

G

3⁄ 4

3.09 (78.5)

1.65 (42.0)

1.42 (36.0)

FD89-1006-12-12

36

-16

G1

3.67 (93.2)

1.89 (48.0)

1.73 (45.0)

FD89-1006-16-16

37

-20

G 11⁄4

4.17 (106.0)

2.17 (55.0)

2.17 (55.0)

FD89-1006-20-20

38

-24

G 11⁄2

5.21 (132.4)

3.15 (80.0)

2.56 (65.0)

FD89-1006-24-24

39

-32

G2

6.17 (156.6) 3.94 (100.0) 3.15 (80.0)

FD89-1006-32-32

40

B

P

1

1/ -18 4

-04

A

Dimensional Data B

–04

-32 Male Half Female BSP/Valved

A

1

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

73

FLUID TRANSFER & HYDRAULIC

Coupling Thread Size Size (P)

FD89 Series Male Half Female SAE O-Ring/Valved

A

P

1

Female Half Female SAE O-Ring/Valved A

B

P

1

FD89 Series Connected Dimensions

L

A

Dimensional Data B

1

Part Number Buna-N

Line Ref.

-04

9/ -18 16

2.00 (50.9)

0.87 (22.0)

FD89-1004-06-04

1

-06

3/ -16 4

2.46 (62.5)

1.06 (27.0)

FD89-1004-08-06

2

-06

7/ -14 8

2.52 (64.0)

1.18 (30.0)

FD89-1004-10-06

3

-08

7/ -14 8

2.76 (70.0)

1.26 (32.0)

FD89-1004-10-08

4

2.83 (72.0)

1.42 (36.0)

FD89-1004-12-08

5

-08

11/

-12

11/

-16

15/

-20 -24

16-12 16-12

2.83 (72.0)

1.42 (36.0)

FD89-1004-12-12

6

3.24 (82.3)

1.73 (45.0)

FD89-1004-16-16

7

15/8-12

3.54 (89.8)

2.17 (55.0)

FD89-1004-20-20

8

17/8-12

4.37 (111.1)

2.56 (65.0)

FD89-1004-24-24

9

-32

21/2-12

4.87 (123.8)

2.95 (75.0)

FD89-1004-32-32

10

-04

9/ -18 16

2.09 (53.1)

1.10 (28.0)

0.87 (22.0)

FD89-1005-06-04

11

-06

3/ -16 4

2.72 (69.2)

1.26 (32.0)

1.06 (27.0)

FD89-1005-08-06

12

-06

7/ -14 8

2.80 (71.2)

1.26 (32.0)

1.18 (30.0)

FD89-1005-10-06

13

-08

7/ -14 8

16-12

3.00 (76.3)

1.50 (38.0)

1.26 (32.0)

FD89-1005-10-08

14

-08

11/

3.28 (83.3)

1.50 (38.0)

1.42 (36.0)

FD89-1005-12-08

15

-12

11/

3.29 (83.5)

1.65 (42.0)

1.42 (36.0)

FD89-1005-12-12

16

-16

15/

3.67 (93.2)

1.89 (48.0)

1.73 (45.0)

FD89-1005-16-16

17

-20

15/8-12

4.17 (106.0)

2.17 (55.0)

2.17 (55.0)

FD89-1005-20-20

18

-24

17/8-12

5.21 (132.4)

3.15 (80.0)

2.56 (65.0)

FD89-1005-24-24

19

-32

21/2-12

6.16 (156.6) 3.94 (100.0) 3.15 (80.0)

FD89-1005-32-32

20

16-12 16-12 16-12

Coupling Size

NPT & BSP

Connected Lenth (L)

-04

3.37 (85.5)

-06-04

SAE O-Ring

1 3.67 (93.2)

-06-06

4.29 (109.0)

-08-06

4.59 (116.5)

-08-08

4.92 (125.0)

Line Ref.

QUICK DISCONNECT COUPLINGS

™

2 3

4.57 (116.2)

4 5

-10-06

4.71 (119.7)

-10-08

5.08 (129.1)

6 7

-12-08

5.30 (134.5)

5.44 (138.1)

8

-12

5.20 (132.0)

5.43 (138.0)

9

-16

6.06 (154.0)

6.05 (153.7)

10

-20

6.81 (173.0)

6.80 (172.8)

11

-24

8.46 (215.0)

8.47 (215.2)

12

-32

9.51 (241.5)

9.51 (241.6)

13

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

74

QUICK DISCONNECT COUPLINGS

FLUID TRANSFER & HYDRAULIC ™

Dimensional Data B C

D

Part Number Buna-N

Line Ref.

9.41 (239)

0.79 (20)

FD89-1009-04

1

9.72 (247)

0.98 (25)

FD89-1009-06

2

1.81 (46)

10.10 (256)

0.98 (25)

FD89-1009-08-08

3

1.81 (46)

10.20 (259)

1.18 (30)

FD89-1009-12-08

4

1.81 (46)

1.97 (50)

10.43 (265)

1.18 (30)

FD89-1009-12

5

-16

2.05 (52)

2.44 (62)

12.50 (318)

1.38 (35)

FD89-1009-16

6

-20

2.36 (60)

2.68 (68)

13.20 (335)

1.77 (45)

FD89-1009-20

7

Coupling Size

A

Accessories

-04

1.26 (32)

1.50 (38)

Female Half Dust Cap PVC

-06

1.42 (36)

1.69 (43)

-08-08

1.65 (42)

-12-08

1.65 (42)

-12

FD89 Series

C B

D

8

A

9 Aluminum C B

-24

3.74 (95)

1.57 (40)

1.97 (50)

2.30 (58.5)

FD89-1009-24

10

-32

4.53 (115)

1.57 (40)

1.97 (50)

2.95 (75)

FD89-1009-32

11 12 13 14

A

D

15 16 17 18 19

Male Half Dust Cap PVC C B

D A

Aluminum C B

-04

1.10 (28)

0.91 (23)

9.06 (230)

0.79 (20)

FD89-1008-04

20

-06-06

1.26 (32)

1.10 (28)

9.17 (233)

0.79 (20)

FD89-1008-06-06

21

-08-06

1.26 (32)

1.10 (28)

9.25 (235)

0.98 (25)

FD89-1008-08-06

22

-08-08

1.50 (38)

1.22 (31)

9.76 (248)

0.98 (25)

FD89-1008-08-08

23

-12-08

1.50 (38)

1.22 (31)

9.76 (248)

1.18 (30)

FD89-1008-12-08

24

-12

1.65 (42)

1.10 (28)

10.10 (256)

1.18 (30)

FD89-1008-12

25

-16

1.89 (48)

1.38 (35)

12.20 (310)

1.38 (35)

FD89-1008-16

26

-20

2.17 (55)

1.52 (38.5)

12.80 (324)

1.77 (45)

FD89-1008-20

27

-24

2.76 (70)

1.57 (40)

1.97 (50)

2.30 (58.5)

FD89-1008-24

28

-32

3.35 (85)

2.05 (52)

2.44 (62)

2.95 (75)

FD89-1008-32

29 30 31

A

D

32 33 34 35 36

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

75

DIAGNOSTIC

FD90 Series/SAE J1502 Interchange

The FD90 Series diagnostic coupling is designed to connect and disconnect pressure gauges to hydraulic systems, eliminating the need for permanent gauges. The maximum operating pressure is 7,000 psi. Automatic sleeve for one hand push-to-connect operation.

face valving provides minimal fluid loss and • Flush low air inclusion.

Physical Characteristics Maximum Minimum Operating Burst Coupling Pressure Pressure Vacuum Size (psi) (psi) (in./Hg.)

-04

7,000

28,000

28

Rated Air Fluid Flow Inclusion Loss (gpm) (cc. max.) (cc. max.)

.50

0.02

0.10

QUICK DISCONNECT COUPLINGS

valve design allows connection and • Self-sealing disconnection at 500 psi. range of end configurations for system • Broad accessibility.

• Standard seal material – Buna-N. • Standard seal material – Zinc plated steel.

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

76

QUICK DISCONNECT COUPLINGS

DIAGNOSTIC ™

FD90 Series Male Half Female Pipe/Valved

Coupling Thread Size Size (P)

Dimensional Data 1 A B

Part Number Buna-N

Part Number with Dust Cap Buna-N

Line Ref.

–04

1/ -27 8

1.70

.62

FD90–1034–02–04

FD90–1035–02–04

1

–04

1/ -18 4

1.90

.75

FD90–1034–04–04

FD90–1035–04–04

2 3 4 5 6 7 8

Male Half Male SAE O-Ring/Valved

–04

3/ -24 8

1.52

.62

FD90–1044–03–04

FD90–1004–03–04

9

–04

7/ -20 16

1.58

.62

FD90–1044–04–04

FD90–1004–04–04

10

–04

1/ -20 2

1.32

.62

FD90–1044–05–04

FD90–1004–05–04

11

–04

9/ -18 16

1.32

.69

FD90–1044–06–04

FD90–1004–06–04

12 13 14 15 16

Male Half Male Pipe/Valved

–04

1/ -27 8

1.60

.62

FD90–1012–02–04

FD90–1045–02–04

17

–04

1/ -18 4

1.49

.69

FD90–1012–04–04

FD90–1045–04–04

18 19 20 21 22 23 24

Male Half Metric Male O-Ring/Valved

–04

M14x1.5

1.38

.75

FD90–1046–06–04

FD90–1047–06–04

25 26 27 28 29 30 31

Female Half Female Pipe/Valved

–04

1/ -27 8

1.95

1.00

.75

FD90–1021–02–04

–04

1/ -18 4

2.25

1.00

.75

FD90–1021–04–04

Dust Cap for Male Halves FD90–1040–04

32 33 34 35 36 37 38 39 40

Female Half Female SAE O-Ring/Valved

–04

7/ -20 16

2.20

1.00

.75

FD90–1041–04–04

41 42 43 44 45 46 47 48

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

77

DIAGNOSTIC

FD90 Series Male Half Male ORS Bulkhead, Valved

Coupling Thread Size Size (P) -04

9/ -18 16

Dimensional Data 1 A B 2.46

.94

.81

2

Part Number Buna-N

.81

FD90-1206-04-04

Part Number with Dust Cap Buna-N

Line Ref. 1 2 3

A

4 5

B

6 1

7

2

8 Male Half, Female ORS Swivel Valved A

-04

9/ -18 16

1.79

.87

.75

.69

FD90-1061-04-04

9

-04

11/

1.83

.94

.75

.81

FD90-1061-06-04

9

-04

13/

1.93 1.08

.81

.94

FD90-1061-08-04

16-16 16-16

9 12 13 14

B

15 2

16

1

Male Half Male Metric O-Ring ISO6149-2 Valved

-04

M10x1

1.58

.72

.62

FD90-1090-10-04

A

17 18 19 20 21 22

B

QUICK DISCONNECT COUPLINGS

™

23 1

24

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

78

Eaton 14615 Lone Oak Road Eden Prairie, MN 55344 USA Tel: 952 937-9800 Fax: 952 974-7722 www.hydraulics.eaton.com

Eaton 20 Rosamond Road Footscray Victoria 3011 Australia Tel: (61) 3 9319 8222 Fax: (61) 3 9318 5714

Eaton Dr.-Reckeweg-Str. 1 D-76532 Baden-Baden Germany Tel: (49) 7221 682-0 Fax: (49) 7221 682-788

Š 2004 Eaton Corporation All Rights Reserved Printed in USA Document No. E-MEQD-MC001-E Supersedes A-MEQD-MC001-E July 2004


Eaton Aeroquip Quick Disconnect Couplings