Page 1

MATERIAL SAFETY DATA SHEET Eaton Aeroquip Hose Assembly Lube Last Update: July 9, 2014

SECTION I: PRODUCT IDENTIFICATION Product name or number:

Aeroquip Hose Assembly Lube NSN# 915000N024686

Reference Part Numbers:

222070, FBM3553, FCM3553, M/00102-0151

Emergency telephone number: Manufacturer’s name: Address:

419-832-0235 Paramount Products for Eaton Corporation 10550 Providence Neapolis Swanton Road Grand Rapids, Ohio 43522 www.Aeroquip.cc / Murdock Industrial Inc. 60-687-0947 None

Distribution Channel: Manufacturer’s DUNS number: Hazardous material description (49 CFR 172.101):

HMIS Health Fire Reactivity Contact Additional hazard classes (as applicable): Chemical family: Formula:

None N/A Blend

SECTION II: INGREDIENTS CAS registry number

% weight

Chemical name(s)

Exposure limit

64742-65-0 9003-29-6

80% 20%

HSR PARAFFINIC OIL VI IMPROVER

5mg/m none

3

SECTION III: PHYSICAL PROPERTIES Pale Amber, viscous oil. SECTION IV: FIRE AND EXPLOSION HAZARD DATA Flash point: Method used: Flammable limits: Extinguishing media: Special fire fighting procedures:

Unusual fire and explosion hazards:

400° F COC LEL: N/A UEL: N/A 2 Fog, foam, and CO Use water fog. Do not use direct stream water DO not enter confined fire space without proper protective equipment. This may include self-contained breathing apparatus to protect against the hazardous effect of combustion products and oxygen deficiencies. Cool fire exposed containers with water. None

1 1 0 B


SECTION V: HEALTH HAZARD DATA Effects of overexposure/conditions to avoid: Threshold limit value: Permissible exposure limit: Primary routes of entry:

Prolonged contact with the concentrate may cause skin and eye irritation N/A N/A Skin and eyes

Emergency and first aid procedures Eyes: Flush with water for 15 minutes. If irritation persists, seek medical assistance. Skin: Flush with water for 15 minutes. If irritation persists, seek medical assistance. Ingestion: Do not induce vomiting. Give large amounts of water or milk if available and seek medical assistance. SECTION VI: REACTIVITY DATA Conditions to avoid: Stability: Incompatibility (materials to avoid): Hazardous decomposition products: Hazards: Conditions to avoid: Polymerization:

None Stable Strong oxidizing agents 2 CO, CO , oxides of nitrogen and sulfur None known None known Will not occur

SECTION V11: SPILL OR LEAK PROCEDURES Steps to be taken in case material spills or leaks:

Waste disposal method: CERCLA reportable quantity (in pounds) RCRA hazardous waste number: Volatile organic compound: Weight per gallon:

Dike spill area with absorbent material. Pump liquid into approved container. Clean up residue with absorbent material and water. CAUTION: SLIP HAZARD. According to federal, state, and local regulations. N/A N/A None Analytical pounds

SECTION VIII: SPECIAL PROTECTION INFORMATION Respiratory protection: Ventilation: Special: Other: Protective gloves: Eye protection: Other protective equipment:

No special requirements with adequate ventilation N/A N/A N/A Rubber Safety goggles As requested by operators

SECTION IX: SPECIAL PRECAUTIONS Storing and handling: Other precautions:

Keep container closed when not in use. Do not reuse empty container. Do not pressurize container.

Pg 2 of 2 UPDATE 7/9/2014

Profile for Murdock Industrial

222070 fbm3553 fcm3553 nsn 915000n024686 msds for eaton aeroquip hose assembly lube  

Aeroquip Hose Assembly Lube 222070 fbm3553 fcm3553 nsn 915000n024686

222070 fbm3553 fcm3553 nsn 915000n024686 msds for eaton aeroquip hose assembly lube  

Aeroquip Hose Assembly Lube 222070 fbm3553 fcm3553 nsn 915000n024686

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded