SWING BEAM SHEAR
MSS
MSS - precise cuts in continous operation The Schrรถder-oscillating cutter model MSS has been designed for highest quality requirements for sheet metal and plastic processing.
Sheet holding device
More than zwo decades of experience is the result of the technology and the design of cutting almost any metal and non-metal material in every range of cutting. With the help of the very latest technology and production methods we can now offer an oscillating cutter with highest efficiency.
Precise cuts for continous operation The swing beam shear type MSS is able to cut up to 5 mm sheet metal and guarantees accurate, plane parallel and edge-free cuttings. An optional central adjustment of cutting slots provides for a perfect adaptation to the material. Easy operation A compact and clearly laid out machine construction as well as an ergonomic design and arrangement of all control and display elements in the central control panel enable an easy handling of the machine.
Standard equipment Manual back gauge 750 mm Hold-down device with hard rubber rail to protect polished sheets Manual blade gap adjustment, two sides Extended angle gauge, right, with T-slot and scale 1000 mm All-steel bottom blade, four-edged All-steel upper blade, double-edged 2 sheet support arms with T-slot and scale 1000 mm Cutting edge illumination Table with exchangeable stainless steel plates Selector switch for single and continous stroke Anchor plates incl. dowels Footswitch
Special equipment Safety
Obligatory CE safety package for standard machines rear guarding via 2-beam light barrier incl. side protection grid (included with ordering a sheet support and/or motorized gauge option)
Blades
Blades designed for stainless steel, instead of standard blades
Others
- Pneumatic hold-down device - Stroke counter (in combination with POS 100 incl.) - Manual blade gap adjustment, central - Motorized adjustment of cutting slot (only in combination with POS 100) - Sheet stacking cart
Gauge
see page 7
Tables
see page 7
2|3
Highest efficiency in standard The MSS already represents a productivity gain in its standard equipment.
Angle gauge with electronic length measurement
Extended angle gauge
The motorized shear type MSS „Swingbeam“ enables a professional and powerful way of cutting. The Swingbeam-technology optimally transforms the power into a cutting movement so that the machine remains its power reserves. The manual back gauge provides for an easy and at the same time exact positioning of the sheet. It can be adjusted with easy crank movements just as needed. Thanks to its easy handling the machine can be operated easily by one person and without any time-consuming training for employees.
Exact positioning The extended angle gauge arranges for a precise positioning of the workpiece and thus for an exact cutting result. This not only facilitates the handling of greater sheets but also increases your productivity. The extended angle gauge is optionally available with an electronic length measurement system.
Ergonomic design At the Schrรถder swing beam shear type MSS all control elements and design in the central operating panel are adapted to ergonomics.
Motorized blade gap adjustment
Linear guide, at the front for movable table support arms and table with ball rollers
NC positioning gauge POS 100
Manual blade gap adjustment
As an option for the manual back gauge the Schrรถder swing beam shear adjusts the back gauge motor-driven via the software control POS 100. The NC-positioning gauge with 9-step program can program gauge length up to 750 mm oder 1000 mm. It is able to considerably facilitate the handling as well as the precise positioning in contrast to the manual adjustment.
The blade gap adjustment can be centrally adjusted via a lever with one simple manual action. Optionally this blade gap can also be acquired as motorized function. A pneumatically, backwards controlled sheet holding device provides for an easy removal of the sheet metal and represents a significant improvement in efficiency. In addition a sheet stacking cart assures simplified logistics and rapid processing.
4|5
Dimensions and technical data MSS Classic
MSS Duo-Cut
MSS
1 000 x 5,0
1 250 x 5,0
1 500 x 4,5
2 000 x 5,0
2 500 x 5,0
3 000 x 5,0
4 000 x 4,0
Working length (a)
1 040 mm
1290
1540 mm
2 040 mm
2 540 mm
3 040 mm
4 040 mm
5,0 mm
5,0 mm
4,5 mm
5,0 mm
5,0 mm
5,0 mm
4,0 mm
3 360 mm
3 860 mm
4 860 mm
Sheet thickness (400 N/mm2)
820 mm
Table height (b) Machine length (c)
1840
2090
2340
2 860 mm
Efficiency
7,5 kW
2 x 5,5 kW
Number of strokes
42/min
32/min
Weight
2240 kg
2440 kg
2640 kg
3 740 kg
4 440 kg
4 780 kg
Machine width (d)
600 mm
660 mm
Machine width (e)
1150 mm
1400 mm
Machine width with manual back gauge 750 mm (f)
2350 mm
2920 mm
Machine width with manual back gauge 1000 mm (f)
2600 mm
2920 mm
Machine width with motorized back gauge (POS 100) 750 mm (f)
2610 mm
2920 mm
Machine width with motorized back gauge (POS 100), 1000 mm (f)
2960 mm
2920 mm
Pneumatic hold-down device
5 780 kg
All specifications are considered as guidelines and may be subject to changes at any time.
(c) (a)
ůĞĐƚƌŝĐ ĐŽŶŶĞĐƟŽŶ
;ĚͿ
;ĞͿ ;ĨͿ
(b)
ϰϬϬ
D ϮϬ T Ϯϲ T Ϯϲ &ƵŶĚĂŵĞŶƚĂů ƉůĂƚĞƐ
ϮϬϬ
ϴϮϬ
dĂďůĞ ŚĞŝŐŚƚ
ϵϬϬ
ϭϮϰϬ
ϭϬ
^ŚĞĞƚ ƐƵƉƉŽƌƚ Ăƌŵ ϭϬϬϬ ŵŵ
Pneuma c connec on
Electric connec on
Gauges and Tables MSS Classic Gauge
MSS Duo-Cut
Manual back gauge 1000 mm NC positioning gauge POS 100 with 9-step program 750 mm NC positioning gauge POS 100 with 9-step program 1000 mm Sheet holding device, pneumatically controlled backwards Sheet return (Push-Back) incl. pneumatically support (material to the back)
Table
Sheet support arm with T-slot - 1500 mm - 2000 mm incl. foot rest Extended angle gauge (right or left) with T-slot and scale - 1500 mm - 2000 mm incl. foot rest Extended angle gauge (right or left) with electronic length measurement system, fine adjustment and lateral flip gaug on linear guide - 1000 mm - 1500 mm - 2000 mm incl. foot rest Verl채ngerter Winkelanschlag (rechts oder links) mit elektronischem L채ngenmesssystem, Feineinstellung und seitl. Klappanschlag auf Linearf체hrung - 1000 mm - 1500 mm - 2000 mm incl. foot rest Adjustable angle gauge with scale division 0 - 180째 Tipping gauge for insertion in T-slot Linear guide, at the front for movable table support arms (without support arms) Moveable support arm for linear guide at the front incl. T-slot and scale - 1000 mm - 1500 mm - 2000 mm incl. movable foot rest Support plate as closed table Support plate with ball rollers as closed table
6|7
Schröder Group The Schröder Group consists of Hans Schröder Maschinenbau GmbH, which is located in Wessobrunn, Germany, and SCHRÖDER-FASTI Technologie GmbH, which is located in Wermelskirchen, Germany. Founded in 1949, Hans Schröder Maschinenbau GmbH unifies traditional and modern approaches in machine building: Successfully managed as a quality and customer-oriented, family-owned company, Hans Schröder Maschinenbau is specialized in the development of modern machine concepts for
All information provided as a guide only and subject to change at all times. 15-1841-HSM 150210ENv01
Schröder Maschinenbau GmbH Feuchten 2 | 82405 Wessobrunn-Forst | Germany T +49 8809 9220-0 | F +49 8809 9220-700 E info@schroedergroup.eu www.schroedergroup.eu
bending and cutting sheet metal. The successful integration of the Fasti Company in 2006 and its worldwide presence make the Schröder Group one of today‘s leading providers of machines for bending, cutting, beading, flanging, and circular bending all types of sheet metal. The company‘s precision machines range from proven solutions for craftsmen to innovative, high-performance machines for automatic industrial production processes. Overall, the Schröder Group currently employs more than 240 people at various locations at home and abroad.