National Supply Construction Equipment Brochure

CONSTRUCTION EQUIPMENT

GENERATORS PM0143250 Rated watts 3250; Surge watts 4050, manual start, low oil sensor, automatic voltage regulator, 4.5 gallons gas tank.

PM0146500 Rated watts 6500 Surge watts 8125, manual and electric start, low oil sensor, automatic voltage regulator, 7 gallons gas tank.

PM014800 Rated watts 8000 Surge watts 10000, manual and electric start, low oil sensor, automatic voltage regulator, gas deposit tank of 7 galons.

TRUCK-MOUNTED TWO-STAGE GAS DRIVEN RECIPROCATING AIR COMPRESSOR 13-14 HP

COMPRESSED AIR SOLUTIONS

Maximum Power and Flexibility: 100% continuous duty, two-stage pump operating up to 175 psi and a 30 gallon ASME receiver tank provide plenty of punch for the most demanding applications.

2475F14G Flow at 90 psi (cfm)

24.3

Max Pressure (psig)

175

Nominal Power (hp)

14

Flow at Max Pressure (cfm)

24

Base Width (in)

22

Base Width (in)

22

Base Height (in)

41

NPT Outlet (in)

0.5

DEMOLITION HAMMER/PAVEMENT BREAKER D25980K •

• •

• •

•

•

SHOCKS - Active Vibration Control reduces vibration felt by the user at the handles. A Perform and Protect feature.

52 joules of impact energy provides maximum performance 15 amp motor provides maximum power and overload protection Rubber-coated handles provide greater comfort and control Electronic Soft Start increases productivity by reducing bit walking Hammer Truck provides easy transportation of pavement breaker Uses 1-1/8” Hex Demo Steel

20V MAX SDS ROTARY HAMMER DRILL KIT, 5-AH • •

• • • • • • •

Blows/min 0 - 4,600 bpm Chargers/batteries fast charger / (2) 20v max* 5.0 Ah li-ion batteries Chipping yes Chuck type sds+ Dust collection ready true Impact energy 2.1 Joules No load speed 0 - 1,100 rpm Optimal concrete drilling 3/16- 1/2 in Vibration control yes - shocks™

20V MAX SDS ROTARY HAMMER DRILL KIT, 5-AH •

•

• • • •

Brushless motor delivers up to 57% more run time over brushed XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs Amps 2.0 Amps Chuck size 1/2” Chuck type metal ratcheting System 20v max*

CONSTRUCTION EQUIPMENT

CV2A 2 HP, 115V Motor Electric Concrete vibrator.

Designed for steel vibrator heads, up to 2-1/8” in diameter, this heavy-duty motor is designed for the rigors of the job site. Multiquip flex-shaft vibrators are designed for work in medium to high-slump concrete. Typical applications include small pours, slabs, driveways, stem walls and footings.

G55H Stationary vibrator motor, Honda GX160 A swivel-mounted base and reliable Honda engine make this power source ideal for concrete vibration applications in remote areas. This unit swivels 360° for easy movement around the job site. Additionally, it eliminates the need for a separate generator on site.

QP2TH 2” Suction, Trash Pump, 211 GPM, 98 ft. MAX Head; Honda GX160 This Honda-powered trash pump boasts a host of standard features for superior performance across the board. Oneman operation to use in various dewatering applications when you have debris in the water.

QP3TH 3” Suction, Trash Pump, 396 GPM, 95 ft. MAX Head; Honda GX-240 This is Multiquip’s most popular pump model. The QP3TH is perfect for many pumping applications from dewatering to water tank and water truck use. Dual discharge ports increase the productivity and practicality of this gasoline-powered trash pump.

J36H55 4-Blade,36”, Honda gx160 4.8hp, min 60-115 max rpm blade speed •

•

•

36-inch (915 mm) guard ring diameter Centre mount lifting bale included Spider and thrust collar assembly design simplifies routine maintenance • Gearbox features top quality components & large oil capacity for years of trouble-free performance

MC94SH8 CONCRETE MIXER This 9-cubic-foot (248 liters) is the ultimate in heavy-duty concrete mixers.

• Powered by reliable Honda GX240 engine • Heavy-duty tubular steel frame with forklift pocket • Capacity is 9 cubic feet (248 liters) • Rugged 14 gauge steel engine cover resists vibration • Spring suspension standard for less bounce, sway • Powder coat paint with a durable long-lasting finish

RANGER® 305 D ENGINE DRIVEN WELDER (KUBOTA) •

•

•

Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire, MIG (CO2 and mixed gas) and arc gouging.

Lincoln Electric Chopper Technology® provides easy starts, a smooth arc, low spatter and excellent bead appearance.

10,000 Watts Peak Single-Phase AC Generator Power

AC/DC 225/125™ STICK WELDER • Easy to operate - With front mounted AC/DC polarity switch and full range amperage selector switch for accurate and dependable procedure setting.

• Smooth arc - Makes it easy to weld with different electrodes, including mild steel, low hydrogen, stainless steel and hard facing electrodes.

• 125 amp DC output - Enough for most 1/8” (3.2 mm) electrodes.

• 225 amp AC output - Enough for 3/16” (4.8 mm) diameter general purpose mild steel electrodes and 5/32” (4.0 mm) sizes of other electrodes.

INVERTEC® V155-S TIG/STICK WELDER READY-PAK Stick, DC TIG Input Power - 115/230/1/50/60 Rated Output - 130A/15.2V/30% 155A/16.2V/30% Input Current - 22.8A, 28.8A Output Range - 5-155A DC Dimensions - (H x W x D) 1.3in x 6.2in x 15.4in (288mm x 158mm x 392mm) Net Weight - 14.70 (6.67kg)

BX-80WH FORWARD VIBRATORY PLATE COMPACTOR Plate Size - (w x l) in (mm)20 x 22 (500 x 565) The BX Series of single-direction, vibratory plate compactors from Doosan Portable Power offers operators the ability to effectively and efficiently compact granular soils, crushed aggregates, and hot mix asphalt on job sites of all sizes.

Powered by a rugged and reliable Honda four-cycle engine, each Doosan BX Series vibratory plate compactor features a belt-driven eccentric shaft, along with an oil bath exciter to eliminate routine greasing.

PERFORMANCE Centrifugal Force - lb (kN)4000 (18.0) Vibrations Frequency - vpm (Hz) 5600 (93.3) Travel Speed - fpm (m/min) 75 - 82 (23 - 25) Max Recommended Compaction Depth - in (mm)14 (350) SINGLE STAGE ROTARY SCREW COMPRESSOR Free Air Delivery - cfm (m3 / min) 185 (5.2) Working Pressure - psig (bar) 100 (6.9) Pressure Range - psig (bar) 80-125 (5.5-8.6) Air discharge diameter - in (mm) 0.75-inch NPT (19) Number of discharge valves 2 Fuel Tank Capacity - gal (L)

RX-304H UPRIGHT RAMMER Plate Size - (w x l) in (mm)11 x 13 (280 x 330) The RX series of upright rammers from Doosan Portable power has been designed to provide efficient compaction over a variety of applications. The RX-304H is engineered to handle a wide array of materials, ranging from mixed and cohesive soils to heavy clays. All of Doosan Portable Power’s light compaction equipment is manufactured with the highest quality material and backed by legacy of service and impeccable reputation.

PERFORMANCE Impact Force - lb (kN)3000 (13.4) Blows per Minute600 - 650 Travel Speed - fpm (m/min) 39 - 46 (12 - 14) Max Recommended Compaction Depth - in (mm) 21 (530)

CONSTRUCTION EQUIPMENT

HEAD OFFICE: 60 Constant Spring Road, Kingston 10, Jamaica W.I. Phone: 876-969-6380, 755-0066.

Fax 876-969-6382 Email: customerservice@nationalsupplyjm.com

BRANCH STORE: Lot 8, Catherine Hall, Montego Bay, St James.

Phone: 876-971-0020-1 Fax 876-971-0022 Email: mobay@nationalsupplyjm.com

nationalsupplyjm

nationalsupplyjm • www.nationalsupplyjm.com