MSOE
DIMENSIONS
FFAALLLL//W WIINNTTEERR /2W 0 1I N 6 -T2E0R1 7 2013-2014
PRESIDENT’S MESSAGE Dear Alumni and Friends, It is my distinct pleasure to present to you the latest issue of Dimensions, my first as president. This issue provides snapshots of just a few of the many fascinating things happening on our campus – from the use of chocolate to enhance engineering education to 3D printing that aids in the fabrication of prostheses in our Rapid Prototyping Center. My first four months at MSOE have been extremely busy and exciting. I am continually impressed with MSOE students, faculty, staff and alumni. Their quality and character, as well as their passion for this university, are clearly evident, and I am indeed fortunate to be able to serve as president. It is no secret that higher education in the U.S. is in a time of considerable transition, with many people questioning the real value of a college degree. These shifts are causing stress and concern in colleges and universities across the country – large and small, public and private.
Dr. Walz introducing himself to students around campus.
However, if there is one university that is in a position to ride out these changes and emerge even stronger, it is MSOE. Because, as I have said repeatedly, we are already doing the hard part right – providing quality education in areas of great demand, need and importance. Whether in engineering, business, nursing, communication or mathematics, recruiters know that students who graduate from MSOE are prepared to succeed, regardless of the direction they choose for their future. One of my goals as president is to help MSOE become one of this country’s recognized elite institutions for higher education. The recently announced rankings by U.S. News & World Report (see back cover) demonstrate our viability in this regard. Like any university, we have some challenges. However, I know that these challenges can be overcome, especially with the great support that we get from our alumni and friends. So while I am extremely proud of where MSOE is today, I am just as excited about where we can and will be tomorrow. With very best regards,
John Y. Walz, Ph.D. President
SPOTLIGHT ON LEADERSHIP
Paul B. Luber “Believe in yourself, follow your gut, take responsible chances and surround yourself with good people.” This same advice MSOE Regent Paul Luber offers MSOE students is what has guided his own career. With more than 30 years of broad manufacturing experience—including ownership, oversight, management and leadership of businesses—Luber has stretched his entrepreneurial wings and soared.
“
We employ several MSOE graduates and they make a positive difference each day. I very much believe in the university and feel privileged and proud to serve as an MSOE Regent.”
A two-time graduate of the University of WisconsinMadison, Luber holds a bachelor’s degree in mechanical engineering and an MBA. He began his career as a manufacturing engineer for Marquette Electronics and after several years returned to school for his MBA, focusing on investment and finance. He then spent time in the investment industry and was involved in money management, venture capital and equity research. “I was raised in Milwaukee and was exposed to business and manufacturing through my father and his work,” said Luber. “One day he called me and said I should really get out of the ‘rat race’ and own my own business. He knew of a small struggling metal working business in Milwaukee that was in need of new ownership and a fresh start. I liked the idea and the timing seemed perfect for me.” Luber admitted he was lucky to grow up in a very entrepreneurial setting. “I got to see it and get a sense of what it takes to make a business work, and gain confidence by watching others pave their way.” “When I started out in business on my own it took all the financial resources I had, plus some help from my parents. I will never forget how proud I felt the day I paid them back with interest! Believe me—there were times that I didn’t think it could happen,” he said. “It took a whole lot more effort, time and perseverance than I ever could have imagined, but after a few years I had it growing at a nice pace and it was making real money. More importantly, the pride of being a business owner and the sense of creating value and jobs really excited me.” Twenty-five years later Luber has started and acquired more than a dozen businesses, enjoys the privilege of serving on several corporate boards and still thrives on the business
process and people he works with. Today, he is chairman of Super Steel LLC; CEO of The Jor-Mac Company Inc.; founding partner of The Accelity Group LLC; and managing member of L4 Holdings LLC. “We employ several MSOE graduates and they make a positive difference each day. I very much believe in the university and feel privileged and proud to serve as an MSOE Regent,” said Luber. “Being an engineer I have always valued the technical and analytical skills that come with it and feel this is an important ingredient in business and the ability to problem solve. My father, Fred Luber, who actively served as an MSOE Regent and benefactor for several decades, exposed me to what an incredible place MSOE is and the talented graduates who emerge from it. MSOE engineers are technically savvy, work-ready, business smart and handson engineers who add value to their employers almost immediately.” Luber lives in Whitefish Bay, Wisconsin, with his life partner Cathy. He enjoys spending time with family and friends, dining out, traveling, visiting Door County and boating on the Great Lakes. They enjoy their collective five young adult children: Drew, Samantha, Annie, Anna and Ashley along with Thumper, their chocolate Labrador. “There is nothing greater in life than to have and raise kids, watch them grow and develop as young adults, and forge their own paths in the world. I’m incredibly proud of who they are and what they do.”
DIMENSIONS x FALL/WINTER 2016-2017
1
IN THIS ISSUE
Upcoming Events
FALL/WINTER 2016-2017
November 1 Graduate Programs Online Information Session
3
Welcome Week
9
South Chapter Alumni Event–Atlanta
19 Commencement
4-6 Highlights
December
7
8-9
10
Spring Commencement
11
Where Did You Spend Your Summer?
12-13
Raiders’ Wrap-up
14
At the Grohmann
15
Faculty Feature
Career Fair Senior Design
3
Open House
4
3rd Annual WMSE Big Band Grandstand
6 Graduate Programs Online Information Session
January 20
Junior Visit Day
26 Civil and Architectural Engineering and Construction Management Career Night
February 7
Graduate Program Showcase
24
Junior Visit Day
25 Commencement
16-19 Dr. John Y. Walz, Fifth President of MSOE
20-21 Additive Manufacturing With a Human Touch
22-32
33
March 5 15th Annual WMSE Rockabilly Chili Contest 10
Junior Visit Day
For more information, please call (414) 277-7117. Find a schedule of athletic events at go-raiders.com, a calendar of Fluid Power Professional Education Seminars at msoe.edu/seminars and Professional Education courses at msoe.edu/professionaleducation.
Alumni on the Move Nothing Short of Sweet
DIMENSIONS Milwaukee School of Engineering Magazine
Senior Editor: Sandra Everts Editor: JoEllen Burdue Managing Editor: Kristen Kubisiak Design Coordinator: Leigh Ann Hass Graphic Designer: Peg Houghton Contributing Writers: JoEllen Burdue, Kevin Conway, Margaret Dwyer, Allison Heine de Romero, Kristen Kubisiak, Loreen Pace, Dr. John Y. Walz Contributing Photography: Jackie Ackerman ’03, Allison Ahern, Austin Calderone, d3photography.com, Margaret Dwyer, Mark Hines, Medical Art Resources, Dr. Katrina Moskalik, MSOE SAE, Erol Reyal, Dr. Nadya Shalamova, Dan Stewart Photograpy, Tabal Chocolate, Joshua Walling
2
DIMENSIONS x FALL/WINTER 2016-2017
Email marketing@msoe.edu or call (414) 277-7135 to request permission to reprint articles or report corrections. Submit address changes to pace@msoe.edu or call (414) 277-7151. Use, reproduction or storage of the name, address or other information about any individual identified within this magazine is strictly prohibited and constitutes misappropriation of corporate property. Fall/Winter 2016-2017 Volume 31, No. 1
Welcome Week 2016
New students became acquainted with the MSOE campus, their peers and professors, and the academic and extracurricular activities MSOE offers during Welcome Week. Students took part in a variety of social events and informational sessions throughout the week. Activities included: outdoor games, a cookout, class picture, video game truck, and a variety of presentations designed to prepare students for academic success. A highlight of the week was meeting Dr. John Y. Walz, MSOE’s new president.
New freshmen tested their trivia knowledge during a Welcome Week kickoff activity in the Kern Center.
Students and families were all smiles as they moved in to their MSOE homes.
Junior Luke Muller beat the heat during an open skating session in the Kern Center..
Students participated in a variety of sports, including a volleyball tournament, during Welcome Week Field Day.
DIMENSIONS x FALL/WINTER 2016-2017
3
HIGHLIGHTS MSOE presents awards
Dr. Wujie Zhang (left), assistant professor in the Physics and Chemistry Department, received the Karl O. Werwath Engineering Research Award. The Falk Engineering Educator Award was presented to both Zhang and Dr. Eryn Hassemer (center), assistant professor in the Physics and Chemistry Department. Beth Slayman, adjunct assistant professor in the Rader School of Business, received the Johnson Controls Award, presented to an outstanding part-time faculty member.
Dr. Eric Durant ’98 (left), professor and computer engineering program director, received the Oscar Werwath Distinguished Teacher Award. Kathy Griesmaier, Bookstore assistant manager, was awarded the Johanna Seelhorst Werwath Distinguished Staff Award.
4
DIMENSIONS x FALL/WINTER 2016-2017
ASEE recognizes outstanding teaching Dr. Mathew Schaefer, associate professor, Mechanical Engineering Department, received the American Society for Engineering Education’s 2016 Outstanding Junior Faculty Award in the Manufacturing Division. He was honored for a paper he wrote about his innovative approach to teaching statistical process control. Dr. Mathew Schaefer The ASEE annually recognizes the outstanding accomplishments of engineering and engineering technology educators.
National honors for students at PBL competition Six members of MSOE’s Phi Beta Lambda (PBL) chapter competed and placed in the top 10 of their respective competitions at the 2016 PBL National Leadership Conference in Atlanta in June. They were among more than 1,700 students who vied for the opportunity to win more than $92,000 in cash awards. Back, left to right: Joel Foster, actuarial science major, 1st place statistical analysis; Marc Tan, business management major, 2nd place management concepts; Hamzah Mirza, MIS major, 5th place information management. Front, left to right: Brina Whittier, international business major, 10th place project management; Amanda Beberger, business management major, 5th place project management; Samantha Riding, business management major, 7th place organizational behavior and leadership.
Underwater Robotics Team pilots to fifth in world MSOE’s Underwater Robotics Team took fifth place in the 2016 Marine Advanced Technology Education (MATE) International Competition ahead of Hong Kong Polytechnic University, Rose Hulman Institute of Technology and many others. Held at the NASA Johnson Space Center’s Neutral Buoyancy Lab, the event challenged students to design and control a remotely operated vehicle (ROV) that can operate in the deep ocean and outer space. Their robot had to survive simulated transport to Jupiter’s moon Europa and operate in the ocean under its ice sheet to collect data and deploy instrumentation; find and recover equipment, collect samples and analyze data from oil mats in the northern Gulf of Mexico; photograph and collect samples of deep-water corals; and prepare a wellhead for decommission and conversion into an artificial reef. Find team photos and videos online at facebook.com/UnderwaterRobotics.
Students with big ideas reap big rewards at festival MSOE students shared their creativity in the first annual Festival of Big Ideas organized by the Humanities, Social Science and Communication Department (HSC) this past spring. Students were invited to present topics that promote intellectual curiosity or provide meaningful entertainment. Abigail Johnson, technical communication major, received first place and a $500 award for her presentation “Every Student Should Be an Artist”; Matheus Faria Inacio, electrical engineering major, received second place and $300 for his piano solo entitled, “Impressions of the Human Learning Process”; and the third place prize of $200 went to Logan Readnour, biomolecular engineering major, for her presentation, “Volunteering: What’s in it for You?” Department Chair Alicia Domack, Ph.D., Drs. Nadya Shalamova, Tammy Rice-Bailey and Katherine Wikoff developed the event, which they are hoping to expand. Acting as event emcee was lecturer Yazmene Thomas, pictured here (left) with Johnson.
Left to right: Seth Opgenorth ’16, Woodrow Walker, Dr. Mathew Schaefer, Jason Julius, Nathan Matecki, Allison Ahern and Robert Gillig.
Soccer for Success Student-athletes made a positive impact in the community this past spring when members of the MSOE men’s soccer team led a 10-week program for at-risk youth. Soccer for Success is a partnership between the Boys and Girls Club of Greater Milwaukee, the men’s soccer team and other Milwaukee-based soccer programs. According to junior Peyton Tebon, “Our goals are to give kids exposure to the game of soccer and encourage a healthy lifestyle and constructive behavior.” Once a week Tebon and three of his teammates, Braden Andryk, Joe Oswald and Santi Osso, taught 20 students in third through fifth grades the fundamentals of soccer.
Important FAFSA updates This year, for the first time, students were able to file their FAFSA for the upcoming school year beginning Oct. 1. (The previous start date was Jan. 1.) Additionally, students and families will be using 2-year-old tax information instead of the previous year’s information. This is beneficial because it allows the vast majority of FAFSA filers to link their tax information directly into their FAFSA using the IRS Data Retrieval Tool (DRT), saving time and improving accuracy. As a result of this federal change, MSOE is moving its FAFSA priority filing date to Jan. 1, 2017. Contact the Financial Aid Office at finaid@msoe.edu or (414) 277-7223 with questions.
DIMENSIONS x FALL/WINTER 2016-2017
5
HIGHLIGHTS
Formula Hybrid Team places second in world MSOE’s Formula Hybrid Team took second place in the world at the Formula Hybrid Competition and first place in the United States. The competition was held in May at the New Hampshire Motor Speedway in Louden, New Hampshire. Founded and run by Dartmouth College, the competition challenges college and university students to design, build and compete high-performance hybrid and electric vehicles. Building on the Formula SAE program, Formula Hybrid adds an extra level of complexity: fuel efficiency. Dr. Tim Herman receives honor Dr. Tim Herman, director of the MSOE Center for BioMolecular Modeling (CBM), received the 2016 Science Olympiad Distinguished Service Award in recognition of his work to improve the lives of students and teachers by inspiring them to learn, collaborate and achieve excellence in science education through participation in the Science Olympiad. The organization also noted that his efforts will bear fruit in the lives of the next generation, and that the country and world are a better place because of him. Under Herman’s direction, the CBM developed the Protein Modeling Event for the Science Olympiad’s national tournament. Dr. Tim Herman For more news and highlights visit msoe.edu/newsroom.
6
DIMENSIONS x FALL/WINTER 2016-2017
Dr. Carol Sabel named chair of MSOE School of Nursing Carol Sabel, Ph.D., RN, CNE, is the new chair of the MSOE School of Nursing. She comes to MSOE from Alverno College, where she served as associate dean of the MSN program in the JoAnn McGrath School of Nursing. She has 30 combined years of experience Dr. Carol Sabel in nursing, education and research. Sabel holds a B.S. in nursing from Marian University and earned her Ph.D. in nursing from UW-Milwaukee, with a focus on education and chronic illness in children. She serves as the grant project manager at the Wisconsin Center for Nursing for the Robert Wood Johnson Foundation State Implementation Plan. Sabel is involved in several local and national nursing organizations, including the Southeast Wisconsin Nursing Alliance, Mental Health Nurse Educators Coalition, National League for Nursing, Wisconsin Nurses Association, American Nurses Association, and the Building Bridges to Advance Nursing Research Conference planning committee. She also serves as president of the Delta Gamma At-Large Chapter of Sigma Theta Tau International nursing honor society. Dr. Aruna Lal receives Army Commendation Medal Dr. Aruna Lal, associate professor in the MSOE School of Nursing, has been awarded the Army Commendation Medal. Dr. Lal is a Major in the U.S. Army. The Department of the Army awarded her this medal for exceptional meritorious service while assigned to the Bravo Company, 452nd Combat Support Hospital. Her professionalism, dedication to being an American soldier, and living the Army values were key to the operational success of the unit. Her attention to detail and unwavering technical knowledge reflect great credit upon herself, the 452nd Combat Support Hospital, 807th Medical Deployment Support Command and the United States Army. Graduate students present papers in Canada Megan E. Hayes and Jacklyn E. Lesser presented papers based on their M.S. in Structural Engineering degree master’s capstone research projects at the Canadian Society for Civil Engineering Annual Conference in London, Ontario in June. Hayes’ paper was titled “Experimental Evaluation of the Robustness of WT Connections under Quasi-Dynamic Load” and Lesser’s was “Experimental Evaluation of the Robustness of Single Plate Shear Connections under Quasi-Dynamic Load.” Each conducted research alongside Dr. Christopher Raebel, P.E. ’94, associate professor and architectural engineering program director, and Marquette University professor Dr. Christopher Foley, P.E. The research is part of Raebel’s ongoing studies into the robustness of steel-framed structures.
Career Fair 2016 The annual Career Fair was bigger than ever! For the first time, it spanned two days and more than 1,100 students took advantage of the opportunity to meet with 242 employers about internship and full-time opportunities.
Frank Garcia, industrial engineering senior, talks to recruiters from Accelogix.
Yushan Lin (center), sophomore electrical engineering major, networks with recruiters at the MSOE Career Fair.
Holly Denfeld, architectural engineering and construction management senior, uses a simulated welding machine at the Illinois Tool Works (ITW) booth.
Sarabeth Haworth (right), a senior pursuing bachelor’s and master’s degrees in architectural engineering, met with Andy Boeck ’02 of TOTAL Mechanical.
DIMENSIONS x FALL/WINTER 2016-2017
7
Senior Design 2016
MSOE seniors proudly displayed their hard work and creativity on Senior Project Day in May. Throughout their senior year (and sometimes before that), they collaborated with classmates on a final project related to their degree program. It’s an opportunity for them to take everything they’ve learned in their time at MSOE and put it to use in a real-life application.
This agricultural lighting system allows researchers to test various LED-based lighting profiles to maximize efficiencies and provide sustainable agricultural growth in highly populated cities. Designed by electrical engineering technology majors, it includes a programmable multichannel high-power LED controller that runs multiple LEDs with different spectra and positions. Electrical engineering majors Abigail Griffin, Aykaz Manucharyan, Michelle Roubik and computer/electrical engineering major Evan Schilling developed a tabletop scaled, low power solid-state Tesla coil suitable for use in a classroom to spark curiosity in young students about electromagnetics.
Nursing majors Angela Chavarin, Kali Faber and Jefrey Mbah developed a plan to improve alarm and call light response times for nurses in a hospital setting.
8
DIMENSIONS x FALL/WINTER 2016-2017
Maysam Bantan and Aparna Bhaskar were part of a biomedical and software engineering design team that created a high fidelity neonatal manikin for the MSOE School of Nursing to help nursing students hear different types of vital sounds.
Jordan Downing and Kyle Kaja were two of the computer engineering majors who calculated the ideal time and position for the Society of Automotive Engineers (SAE) Aero Design team to accurately airdrop a humanitarian package during the international competition.
Nicolas Matschinegg, electrical engineering major, demonstrated his team’s system that is inserted into a helmet to alert motorcyclists of obstructed blind spots using ultra-sonic rear sensors and LED notifications. The device also connects via Bluetooth to a rider’s phone for basic calling capabilities.
With their machine, Clark Anderson, Sven Kirschtowski, Bilal Nyazi, Devin Runner, Arthur Siebel and Ou Yang took second place at the regional American Society of Mechanical Engineers (ASME) competition. The goal was to design and build the smallest possible machine that could take three sheets of copier paper and throw them as far as possible.
Biomolecular engineering majors Logan Andryk, Brianna Eales, Shantanu Mishra and Melissa Moyer worked to redesign an artificial aortic valve called the Medtronic CoreValve to eliminate conduction abnormalities caused by pressure the valve exerts on a bundle of signaling fibers (proteins) in the heart.
DIMENSIONS x FALL/WINTER 2016-2017
9
Navy veteran Stephen G. Myers received an Honorary Doctorate of Engineering degree from MSOE for his contributions to the advancement of the aviation industry and his commitment to educating future generations. He was a Navy pilot, worked at Lockheed-Martin and lectured in mechanical engineering at MSOE for 13 years. “The world is your oyster,” Myers told MSOE’s 440 graduates during his keynote address. “Performance, judgement and attitude are the kind of elements that you need to succeed. The future is bright for you; the world is bright for you.” Dr. Cynthia Barnicki, MSOE Mechanical Engineering Department, and Dr. Bernard Cohen, MSOE Regent, present Stephen G. Myers with his academic regalia as he receives an Honorary Doctor of Engineering degree at MSOE. Watch Myers’ keynote address at youtube.com/msoeweb.
Ana Sofia Larraga Martinez (above, right) and Shannon Good were the class respondents.
10
DIMENSIONS x FALL/WINTER 2016-2017
Where Did You Spend Your Summer? MSOE students have the opportunity to participate in shortterm trips to learn abroad, in addition to traditional study abroad programs. Some are an extension of what they studied in the classroom and others combine learning and service. No matter the reason or the destination, students are coming away with once-in-a-lifetime experiences that will help shape their futures.
Jamaica
Immediately after completing final exams, University Scholars and William Gonwa, assistant professor, Civil and Architectural Engineering and Construction Management Department, headed to the small Jamaican town of Hagley Gap, located in the southeastern mountainous area. During the school year they designed a solar food dehydrator and they travelled to Jamaica to complete its construction and assembly at a primary school. With the help of the community’s young students, they built the dehydrator in three days. In addition, MSOE students hosted educational programs to train those who will be operating the dehydrator and inspected a water system requiring repair.
either engineering or humanities during the program, which is coordinated by Anne Deisinger, project manager, Mechanical Engineering Department. “I hoped to experience a different culture and the trip did not disappoint me. The classroom experience was very different when compared to that in the United States; the rules were sterner and professors were authority figures. French etiquette was learned outside the classroom—just a casual conversation with French students taught so much. The connections I made there will last a lifetime,” said Gowtham Sundar, mechanical engineering major.
Russia
In July, biomedical, computer, electrical, mechanical and software engineering majors traveled to St. Petersburg, Russia with Dr. Olga Imas, associate professor of biomedical engineering, for a two-week study-abroad and cultural program at the Bonch Bruevich St. Petersburg State University of
“Our trip to Jamaica was my second time ever traveling out of the country, and each had been under the auspices of service and humanitarian engineering. The struggles we faced in making the project happen were nothing compared to the intrinsic rewards of what we accomplished as a team of freshmen engineering students,” said Joshua Shefner, civil engineering major.
France
Over the past five years, 23 students have attended Lille Catholic University’s European Summer Program in Lille, France. In June, MIS, mechanical engineering and software engineering majors went to Lille and each earned six credits in
Telecommunications (SPbSUT). Students participated in a series of lectures and hands-on laboratory projects. They visited Yandex, or the “Russian Google,” and participated in excursions to the Hermitage Museum, Petergof Palace and Gardens, St. Isaac’s Cathedral, Catherine Palace and Gardens, and Pushkin’s Lyceum. “What surprised me was how similar our cultures actually are. You kind of expect a ‘culture shock’ when travelling across the globe, but this was not the case here. The meal portions were smaller, and the public transportation was much cleaner, but other than that it was all pretty similar,” said biomedical engineering major Aleah Boehlen-Joosten. .msoe Learn more about MSOE’s study-abroad opportunities including a program in China for graduate students at msoe.edu/academics/study-abroad. DIMENSIONS x FALL/WINTER 2016-2017
11
RAIDERS’ WRAP-UP
Baseball makes historic run to NACC championship game The MSOE baseball team enjoyed one of the most successful seasons in school history, winning a school-record 24 games on its way to the NACC championship game. The Raiders made their first tournament appearance since joining the NACC and won four games in the double-elimination event to advance to the title showdown.
Tyler Doyle
MSOE’s run secured the program’s first winning season since 1983 and eclipsed the school record of 21 wins. It was also a strong first showing for a team that is looking to revisit its championship era of the Lake Michigan Conference in the 1980s. There were a number of standout performances for the team, led by senior Tyler Doyle. He batted .362 with 35 RBIs and 32 runs scored. He was named to the All-NACC First Team and to both the ABCA and D3baseball.com AllRegion Third Teams. Sophomore Jimmy Carrington hit .313 with 38 RBIs and 31 runs scored and joined Doyle on the all-league first team. Junior Jacob Roley was named to the All-NACC Second Team as the ace of the pitching staff with a 5-4 record, three complete games and a 3.70 earned run average.
Snow named to All-NACC First Team
Emily Snow
Freshman Emily Snow of the MSOE softball team was named to the All-NACC First Team at third base and was also selected to the NACC All-Freshman Team. She is the first Raider named to the all-conference first team since MSOE joined the NACC in 2008. Snow started all 32 games, batting .414 with three home runs and 16 RBIs. She walked 13 times against nine strikeouts, posting a .492 on-base percentage and slugging .606. She had a late-season surge, riding a 15-game hitting streak into the last game of the season to raise her batting average 81 points. Her batting average was the highest by a Raider since 2010 when Julie Windish also hit .414.
Oliver Winsor
Lacrosse continues to move forward The MSOE lacrosse team has continued to move forward under head coach Sean Farrell with another strong campaign, winning five games in the spring. The Raiders finished the season at 5-8 with a 1-5 record in league play. In addition to the best defensive campaign in school history, the team also set a school standard for goal differential for a season at +16. The 2016 season was the third with Farrell at the helm. He boasts 15 wins over those three seasons. The program had just two in the four seasons that preceded his arrival.
12
DIMENSIONS x FALL/WINTER 2016-2017
Holly Denfeld
Denfeld again named Academic All-American Junior Holly Denfeld was named to the College Sports Information Directors of America Academic All-America Third Team for track and field. She became the first Raider to earn Academic All-America honors for two different sports, as she was named to the first team in basketball earlier this year. The award is the third overall for the architectural engineering and construction management major. She boasts a 4.00 cumulative grade point average and was named to the women’s basketball second team as a sophomore. After a year off from track and field, Denfeld returned for the outdoor season and scored in four events at the NACC Championships. She placed fourth in the 400-meter hurdles and triple jump, was fifth in the 100-meter hurdles and ran with the sixth-place and school-record 4x400-meter relay. During the basketball season, Denfeld was most notably named the recipient of the Jostens Trophy, an All-America honorable mention honoree and the NACC Player of the Year.
Jerica Kotarak
Kotarak returns to NCAA track and field championships Freshman Jerica Kotarak of the MSOE women’s track and field team qualified for the NCAA Outdoor Track and Field Championships in both the long jump and triple jump. She had qualified for both events at the national indoor meet as well, earning All-America honors in the triple jump with a seventh-place finish. She placed 11th with a school record in the triple jump at the outdoor meet with a leap of 37-8 on her first attempt in the triple jump. She had opened her competition with a leap of 18-2 1/2 in the long jump, taking 14th in the event.
Nelson, Knoblauch named head coaches The MSOE Athletic Department made two additions to its head coaching staff in August, announcing the hiring of Katie Nelson as head women’s basketball coach and Kyle Knoblauch as head softball coach. They replace Jessica Ott, who had held both positions before leaving MSOE for another opportunity. Nelson has spent the last seven seasons at Johns Hopkins University with the Blue Jays, helping the team to six winning seasons in that time and a 123-62 (.665) record. Knoblauch is the founder of B.A.T.S Sports Academy and B.A.T.S Fastpitch in Mequon. In 2015, he founded Team Wisconsin Fastpitch and serves as the U16 head coach. Under his guidance, B.A.T.S. Academy Fastpitch has become one of the top programs in the Midwest, with over 30 student-athletes earning college scholarships in the last four years.
DIMENSIONS x FALL/WINTER 2016-2017
13
At the Grohmann On the Job: Photography by Jim Seder Open through Dec. 11, 2016 Following decades of work in local industry, Jim Seder resolved to take a new look at work—and the worker—through the lens of his camera. This homage to work took the form of portraits of the workers he encountered in daily life. Included are carpenters, masons, landscapers and the like, all captured in a trademark style in which the subject is the singular focus. This exhibition features dozens of Seder’s recent photographs of working people.
On Screen:
• The Grohmann Museum was featured by WGN News as one of Milwaukee’s most interesting destinations. Watch online at msoe.edu/museum/wgn_news.
• Get a glimpse of the Grohmann Museum from the convenience of your own device. Visit msoe.edu/museum/virtual_tour for a 360-degree look at the museum’s soaring atrium and “walk” up the stairs to peek at each level.
Upcoming Exhibit: Steel: The Cycle of Industry by David Plowden Opening Jan. 20, 2017
Paul and Jesus, Two Masons, digital print, 55 x 44 in.
.msoe For more information on this and other exhibits, visit msoe.edu/museum.
14
DIMENSIONS x FALL/WINTER 2016-2017
David Plowden states that “the architecture of steelmaking is like no other. Nowhere can you find this massiveness, drama, spectacle and danger but in a steel mill.” The exhibition will feature more than 100 of his finest photographs. Steel places the viewer at the point where shovel meets dirt in the mining process and ends in the same soil surrounding these longGROHMANN MUSEUM MAN AT WORK Art Collection abandoned mills.
FACULTY FEATURE Dr. Vincent Prantil Once, a student actually turned to Dr. Vincent Prantil and said it out loud: I don’t need you anymore. There’s confusion, frustration–maybe even some impatience–but after some hard work and guidance, eventually it happens. “It’s a great thing,” said Prantil. “Although students usually don’t come right out and say it like that.” Prantil, a professor in mechanical engineering, has been helping MSOE students achieve I-don’t-need-you-anymore moments for 16 years. The Brooklyn-born, Cornell University educated Prantil heard about MSOE through a former faculty member. When he was seeking a job in higher education, the university stood out to Prantil because of its focus on teaching. In 2000, he made an impromptu visit to Milwaukee to tour MSOE. Six months later he was invited to apply for an assistant professor position and he was hired. Although he spent much of his professional life in industry, working 12 years as a research engineer for Sandia National Laboratories in Livermore, California–seven years as a senior researcher, teaching has always been his passion. “Parker Palmer says vocation at its deepest level is that feeling ‘this is something I can’t not do.’ That is how I feel about teaching,” Prantil said. Palmer is one name on the eclectic list of pedagogues who inform Prantil’s teaching philosophy, including physicist Richard Feynman and TED Talk contributor Tyler DeWitt, a high school chemistry teacher and Ph.D. student in microbiology at MIT. “People think that for science to be real it has to be serious,” Prantil said. “DeWitt says when you are talking to fresh, young learners you need to tell a story; find something they can relate to. Strip away the complex jargon into its basic elements.” Prantil fully embraces this approach. He authored a textbook in system dynamics that was inspired by comic
book superheroes and illustrated by one-time The Simpsons animator Tim Decker. Most recently, his commitment to making dynamics education relatable and engaging led to his participation in a National Science Foundation-sponsored collaboration with Northern Illinois University and Rutgers to improve student learning through the use of the video simulation platform, Spumone. “There is a notion if learning is fun as when delivered through a video game, you are playing to a student’s ‘entertainment needs,’” Prantil said. “But we target student engagement, not entertainment. In pilot studies, Spumone improved learning of engineering dynamic concepts. The moment a game loses its ties to science and becomes entertainment it’s of little interest to me.”
“The longer I am here, the more I realize I can’t find another university like this.” Beyond the classroom, Prantil is the program chair of the mechanics division of the American Society for Engineering Education. Achievements of which he is most proud include his role in the conversion of a carriage house at Cornell University into what is today the Big Red Barn Graduate and Professional Student Center; and the part he played in establishing the protracted leave program for MSOE educators. “When teachers have time dedicated to scholarly pursuits, they come back reenergized,” he said. When not at MSOE, Prantil enjoys spending time with his wife and children–16-year-old Carmen and 12-year-old Lorin. He also enjoys swimming and bicycling, and for many years he scuba-dived and played underwater hockey. “The longer I am here, the more I realize I can’t find another university like this,” Prantil said. “I work with great professors and I have the freedom to choose my intellectual pursuits. At MSOE, I can always promise the students I am here for them.”
DIMENSIONS x FALL/WINTER 2016-2017
15
Dr. John Y. Walz
Fifth President of MSOE
16
DIMENSIONS x FALL/WINTER 2016-2017
W
ith their eyes on the future and a nod toward MSOE’s history, the MSOE Presidential Search Committee sought an industryexperienced professional who also is an academic leader. They found that rare combination in Dr. John Y. Walz, who was appointed fifth president of MSOE and assumed the role on July 1, 2016. Throughout his career, Walz has had the opportunity to work in industry, at big public schools and also at small private schools. When asked what he’s most proud of professionally, he doesn’t hesitate. “I’m very proud of the students I’ve impacted. In education, your success is measured by your students’ success. That’s why we’re here. I’m very proud of what the graduate and undergraduate students I’ve had the pleasure of working with have accomplished. And I’m proud of the positive impact I’ve had on them.” Walz is looking forward to making an impact at MSOE. “When I was contacted by a search firm regarding the presidency at MSOE, I did what anybody would do. I went online to learn as much as I could about MSOE and I discovered I really liked it. I liked its mission and was very, very impressed by the great job MSOE is doing educating students in important fields. That resonated with me. MSOE is doing really well already and has the opportunity to become an elite institution. MSOE is the type of university that I wanted to be president of.” Every step in his career prepared Walz to become president of MSOE. He earned his degree in chemical engineering from Tulane University, about an hour from his hometown of Ponchatoula, Louisiana. After graduation Walz was a process support engineer for Shell Oil Co. at a large plant outside of New Orleans. “My initial plan was to take a summer job and then go back to grad school,” he said. “But I really liked the work and the people. Having a little bit of money was nice too, so I decided to stay. I was supporting a large plant making chemicals and problem solving and working with the operators.” During that time, Walz took graduate courses at night at Tulane. It was then that he became interested in the science side of things and the technology. “I wanted to get into research at Shell and figured I needed a Ph.D. So I took a leave of absence to get a Ph.D. in chemical engineering at Carnegie Mellon. My time in industry was good and enjoyable. I have an appreciation for the importance of engineers because Shell was a huge operation and it was run by engineers. After I got my Ph.D., Shell made me an offer to work in their R&D center. But in grad school I picked up the teaching bug so I decided to give teaching a try—and I really enjoyed it.” Walz taught in the Chemical Engineering Departments at Carnegie Mellon University, Tulane University and Yale University. His first academic leadership role was as chairman of Yale University’s Chemical Engineering Department. From there he went on to Virginia Tech where he was a professor and head of the Department of Chemical Engineering, and most recently he served as a professor and dean of the College of Engineering at the University of Kentucky. “Dr. Walz comes to us with a highly commendable record of education and leadership experience. He has a strong history of relationship-building both internally and externally to support the goals of the institution. He is continued on next page DIMENSIONS x FALL/WINTER 2016-2017
17
“
I’m happy and excited to be at MSOE. I think we’re doing great things; we’re a very strong university with a lot of opportunity.”
a tremendous addition to the university,” said Dr. Scott Moon, chairman of the MSOE Board of Regents and chairman and CEO of DLSM. Regarding the future of engineering, business and nursing, Walz said, “The boundaries between disciplines are getting thinner and starting to break down. It’s all about multidisciplinary approaches to work and problem solving. For example, we could have engineers working with nursing and business students on developing a new product or device and how to do that in a profitable way. “MSOE is in a great position to break barriers between disciplines because we’re small and private and we can be nimble. Starting new and interdisciplinary programs is easier to do here than it might be at a large school. We can adjust quickly and take advantage of opportunities that arise. Today’s problems and challenges are becoming so big that it’s hard for one discipline to attack them. We need people with multiple skill sets.”
Q&A with President Walz How would you introduce yourself to folks? I’m from the Deep South, and still a southerner at heart. I have a little bit of that laid back air about me. I’m very passionate about education. What were your initial impressions of MSOE? My wife and I have been very impressed by the faculty, staff, alumni and students. Their quality, character and passion really come through. People are very passionate about MSOE and love it and care for it very deeply. That makes me feel good. What is the most interesting thing you’ve learned about MSOE since you’ve arrived? I’ve been reading The History of MSOE: The First 100 Years, and it’s interesting to see how the school has evolved over time. This is also the only place I’ve ever been that there is a wax figure of the founder in the student center. That took me back a little bit at first.
18
DIMENSIONS x FALL/WINTER 2016-2017
What do you see as your most important functions as president? • The president has to set a vision for where the university should go, develop a plan for achieving it and work with people on doing that. • Be an ambassador and represent the institution externally. • Work with people outside the university to obtain resources for the university. • Put the right leadership team in place. Even at a relatively small university you’re still big enough that you cannot focus on and take care of every single thing. How would you describe your leadership style? I believe in communication. There’s no such thing as too much communication. I like to assemble the right people and empower them, support them and let them do their job. It’s important to have a shared vision and work toward the same goal.
What role does MSOE have in developing entrepreneurism? Some people are born natural entrepreneurs, and not every single person is meant to be an entrepreneur. But the skills embodied in that—of being a creative problem solver—are valuable to anybody. Having programs that support those types of activities is important for MSOE. It’s a way of teaching those skills to students regardless of where they want to go in their career. What are you most proud of personally? My family is my biggest pride. I have a wonderful wife and three great daughters. They’re each doing well in their own way. My wife Moira is an RN whose specialty is neonatal intensive care. She loves babies and we were foster parents for a few years, taking care of children with special needs. We have three daughters: our oldest daughter Megan is a graduate student in engineering at the University of Kentucky. Bridget is majoring in architecture at Virginia Tech and entering her final year. Our youngest daughter Emily is a student at Shorewood High School. We also have a Pomeranian named Coco who is Emily’s pride and joy. What advice do you have for MSOE students? Always have a plan for what you want to do and where you want to go, but take advantage of opportunity. I know this is cliché, but you will never get an opportunity like this at a university again. Whether that’s joining a club, getting involved in something, or taking a course outside of your major on something that’s of interest to you—do it. You always want to stay focused on your academics, but at the same time, broaden yourself. MSOE has a lot of things to offer. Take advantage of that.
What do you enjoy doing in your free time? I love to read and I’m a bit of a sports fan. I’m not a real fanatic, but if there’s a good game of basketball or football on I’ll watch it. I like to fish and wish I had more time to do that. I find it’s a very peaceful and relaxing thing to do. Favorite book: I read everything from history to detective fiction. I like reading about the places where I’m living or visiting. I always have a book, and I still read the old-fashioned way with paper books. Favorite movie: If they’re on TV, no matter how many times I’ve seen them, I will watch Jaws and O Brother, Where Art Thou. Jaws scared the youknow-what out of me when I first saw it, but I still like that movie. And even though I’ve seen it many times I’ll still laugh when I watch O Brother, Where Art Thou. Favorite sports team: At the risk of alienating people, I grew up in New Orleans so I’ve been a New Orleans Saints fan since I was a kid. I supported them even when they were the worst team year after year. We were avid fans and that’s in my blood. I will root for the Packers against anybody, except for the Saints. Dream vacation spot: A place near the water where I could fish, enjoy some good restaurants and visit historical sights. What have you brought along with you throughout your career? I have a hand boiler (pictured at right), which is a demonstration of chemical engineering. If you touch it on the bottom, all of the liquid on the bottom goes up into the top. It’s a cool little device that I play with sometimes; it relieves stress. A student I worked with at Yale gave it to me. I worked with her a lot, and when she graduated she gave me this as a little thank you gift. Inauguration events will take place in Spring. Stay tuned for information.
President Walz and his wife Moira with their daughters, Megan ( far left), Emily and Bridget.
.msoe Visit msoe.edu/dimensions to see a video and hear more from Dr. Walz. DIMENSIONS x FALL/WINTER 2016-2017
19
Additive Manufacturing Brittany Ballinger, 28, was born with microtia, a congenital condition where the external ear is underdeveloped. The Appleton-native was 10 years old when she was fitted for her first prosthesis by Milwaukee-based Medical Art Resources – a business that designs and fabricates custom prosthetic devices. “Our ear prostheses are individually designed to restore aesthetic balance and symmetry to the face, providing support for eye glasses and hearing devices,” said Megan Spindel Thomas, Medical Art Resources certified clinical anaplastologist. “When the ear canal is present, the prosthesis can also improve hearing by directing sound toward the ear opening.” Ear prostheses have a lifespan of two to three years, and Ballinger’s was due for a replacement. During the course of her life she has had 11 prostheses, but the newest, which was created through a partnership between MSOE and Medical Art Resources, was Ballinger’s first made through the use of additive manufacturing technology at MSOE’s Rapid Prototyping Center. For 25 years, the RPC has provided expertise about and access to equipment and emerging technology that would otherwise be cost
Human Touch
prohibitive for most companies to have internally. One of these technologies is additive manufacturing, or 3D printing, a process by which digital 3D design data is used to build a component up in layers.
Julie Jordan Brown, founder of Medical Art Resources and certified clinical anaplastologist, approached RPC Project Manager Jordan Weston, ’10, ’15, to discuss whether there was a place for additive manufacturing in her business. “She explained their process to me and I looked for ways we might be able to help,” Weston said. In Ballinger’s case, the process starts by taking an impression of the intact ear. The mold is then used to create a cast, or a positive reproduction. Anaplastologists use the positive reproduction to hand-sculpt a mirrored wax prototype of the absent ear, a practice that’s both time-intensive and challenging. “It’s difficult to capture the unique, organic forms of each person’s ear completely accurately,” Brown said. The hand-sculpted wax prototype the anaplastologists create is then use to make a mold and eventually the silicone prosthesis. Weston saw the paired technology of 3D scanning and 3D printing as a way to improve accuracy and efficiency in this process. “We use the Creaform HandySCAN 3D™ to collect millions of data points off the surface of the object, which is then used to reconstruct an exact digital copy of the physical object,” Weston said. ( Left) : The 3D printed model and Ballinger
with her finished prosthesis.
20
DIMENSIONS x FALL/WINTER 2016-2017
“3D printing allows us to build the complex, organic shape of an ear in a manner that is more cost effective than any other traditional form of fabrication.”
The digital model Pulipati created is sent to the 3D printer and is used to create a physical model. Jessalynn Smith, a biomedical engineering major and employee of the RPC, uses the ProJet® 660Pro 3D printer to make the prototype.
First, MSOE graduate student and RPC Research Assistant Daniel Pulipati scanned the positive model of Ballinger’s intact ear into CAD computer software and created a mirror image. He then transferred that data to the 3D Systems ProJet® 660Pro which selectively jets a binding agent into thin layers of a fine plaster powder to create an exact physical model. “The 3D print guarantees that the details, dimensions and anatomical relationships are perfectly replicated, and it eliminates the four-plus hours long hand-sculpting session we’d traditionally do, ” Brown said. 3D technology also offers the advantage of increased throughput. The time needed to scan and print three models for three different patients is only marginally longer than scanning and printing just one. “We see 3D printing of the model ears as just a launching point for other ways to incorporate that technology into our practice,” Brown said. To date, the RPC has created 15 prosthetic models for Medical Art Resources. “It’s exciting to be a part of it,” Weston said. “Being able to utilize 3D printing to improve someone’s quality of life is very rewarding.” 1. (Top): Pulipati’s laptop screen shows the images being captured in real time as the laser grid is focused on the cast and the reflections of the cast are used to construct the 3D model by the HandySCAN’s dual camera. 2. (Middle): Excess plaster powder is removed with a brush. 3. (Bottom): The model is coated with a sealant to finish the build process.
RPC Then and Now The Rapid Prototyping Consortium began in 1991 with five manufacturing companies as partners. Today it has grown to 38 members. The consortium celebrated its 25th anniversary in October.
The first machine was an SLA 250 (ideal for building small, detailed, precision parts) and produced parts using a brittle translucent material. The RPC now has nine additive machines, representing six different additive processes, which are able to leverage a wide variety of materials. The RPC has expanded to several other industries such as, medical implants, recreational vehicles, footwear, beverage and bottling, and consumer goods. Initially, the primary work in the RPC was conceptual prototyping and fit testing. Today work includes additive manufacturing applications development, part performance validation, short run and bridge production fulfillment.
.msoe Read bonus content and see the entire process in our “Making a Prosthesis” slideshow at msoe.edu/dimensions.
DIMENSIONS x FALL/WINTER 2016-2017
21
ALUMNI ON THE MOVE New Assignments
1970s Joseph N. De Carlo ’73 BIM, vice president – international and senior consultant, Balanced Scorecard Institute, Cary, N.C. Kirk Alcorn ’78 ABCET, senior superintendent, Massaro Corp., Pittsburg
1980s William Strangeway ’82 EET, ’94 MSEM, scrum master, Northwestern Mutual, Milwaukee Daniel Brook ’86 ME, vice president of engineering and quality assurance, Super Steel LLC, Milwaukee
1990s Philip Blumenfeld ’94 ME, research and development project engineer, Astronautics Corp. of America, Madison, Wis. David Goulet ’94 ME, vice president of engineering, Polaris Industries, Medina, Minn. Michael Shedivy ’95 BMS, vice president – global commercial category management and product development, Life Fitness, Rosemont, Ill.
22
Paul Hartman ’96 EET, customer support manager, Office of Senate Information Technology, Tallahassee, Fla. John Neary ’96 MET, director of engineering, Paper Machinery Corp., Milwaukee Todd Van Gompel ’96 ME, vice president, Baisch Engineering, Kaukauna, Wis.
2000s Bethany (Matulis) Crispin ’00 AE/CM, senior vice president of construction, CA Ventures LLC, Chicago Neha Mathur ’01 MIS, senior program manager, Quest Diagnostics, Marlborough, Mass.
Eric Waydick ’03 EE, ’16 MSE, senior project engineer, DRS Technologies, Milwaukee Michael Latvala ’04 ME, mechanical engineer III, Minnesota Power, Duluth Anish Ramrakhyani ’05 ME, key account manager/engineer, FESTO Corp., Arlington Heights, Ill. Justin DeLany ’06 IE, ’15 MSEM, ’16 MBA, global CI leader, Actuant Corp., Menomonee Falls, Wis. Mark Edmunds ’06 ME, product manager, Snap-on Inc., Kenosha, Wis.
Veronica (Konieczka) O’Dierno ’06 AE, application engineer II, Modine Manufacturing Co., Racine, Wis.
2010s Joseph Westrich ’11 AE, technical services engineer, Pepper Construction, Barrington, Ill. Ghislain Schneider ’12 ME, design engineer, Hevi-Haul International, Menomonee Falls, Wis. Alexander Yendrzeski ’12 ME, project engineer, Signicast Corp., Hartford, Wis.
Ian Vohwinkle ’01 AE, president/principal, MS2 Consulting Engineers, San Antonio, Texas Jeffrey Hebbard ’02 MSEM, vice president and chief operations officer, TIDI Products LLC, Neenah, Wis. Michael Peterson ’02 ME, vice president of operations, Concepts and Designs Inc., Owatonna, Minn. Steven Witucke ’02 B&CS, infrastructure manager, Experian, Franklin, Tenn. Rebecca Carroll ’03 AE, mechanical engineering manager, Stantec, Anchorage
DIMENSIONS x FALL/WINTER 2016-2017
More than 100 golfers participated in MSOE’s 34th annual President’s Golf Outing in June to raise $107,000 for student scholarships, including, left to right: Craig Hanson ’11, Leah Hendricks ’16, Joe Hofman ’08 and Collin McCarthy from JF Ahern.
Thomas Gulke ’14 MIS, ’16 MSMI, information technology leadership program participant, GE Healthcare, Milwaukee Daniel Laska ’14 ME, ’16 MSEM, environmental coordinator, Smithfield Foods Inc., Cudahy, Wis. Jenna Staffaroni ’14 BE, ’16 MSP, staff perfusionist, Aspirus Wausau Hospital, Wausau Jonathan Buettner ’15 IB, territory manager, ARI Network Services, Milwaukee Camille Carreon ’15 NU, registered nurse, Aurora West Allis Women’s Pavilion, West Allis, Wis. Evan Draeger ’15 ME, ’16 MBA, process quality engineer, Voith Paper Inc., Appleton, Wis. Anshul Kirti ’15 EE, embedded systems engineer, Johnson Controls/Embytes, Milwaukee Shreya Mettakadapa ’15 MSE, mechanical engineer, Red Seal Measurement, Greenwood, S.C.
Kendra Ridder ’15 NU, registered nurse, Aurora West Allis Medical Center, West Allis, Wis. Jasmine Strickler ’15 BM, database analyst, MSOE, Milwaukee Kersey Uphouse ’15 IE, manufacturing engineer, Benchmark Electronics, Rochester, Minn. Vishwajith Variyala ’15 EE, controls engineer, WunderlichMalec Engineering Inc., Kingwood, Texas Samantha Wallace ’15 CM/ TC, engineer, Clark Construction, Bethesda, Md. Peter Wawer ’15 EE, electrical engineer, Johnson Controls Inc., Milwaukee Brendan Wertanen ’15 ME, estimator, Mass Electric Construction, Waltham, Mass. Paul White ’15 MSCBM, project engineer, CG Schmidt, Milwaukee Keith Agner ’16 ME, sales engineer, Paul C. Crane Co., Cincinnati
Nicholas Miceli ’15 ME, transportation construction inspector, New York State Department of Transportation, Hauppauge, N.Y.
Clark Anderson ’16 ME, mechanical project engineer, Konecranes Nuclear Equipment & Services, New Berlin, Wis.
Adam Resnick ’15 ME, design engineer, Milwaukee Electric Tool Corp., Brookfield, Wis.
Alexander Andrews ’16 EE, test engineer, Plexus Corp., Neenah, Wis.
Logan Andryk ’16 BIOE, technical problem solver, Epic Systems Corp., Verona, Wis.
Elizabeth Brooks ’16 SE, software architect, RokkinCat LLC, Milwaukee
Izael Zapata Arriaga ’16 EE, product engineer, Yaskawa America Inc., Waukegan, Ill.
Colleen Brown ’16 NU, registered nurse, Aurora Health Care, Milwaukee, Wis.
Reney Bagnall ’16 AE, field engineer, Mortenson Construction, Brookfield, Wis.
Joseph Buichl ’16 SE, software engineer, GE Healthcare, Milwaukee
John Bajorek ’16 EE, electrical engineer, Bruno Independent Living Aids, Oconomowoc, Wis.
Brian Burhop ’16 MET, project engineer, Polyfab Corp., Sheboygan, Wis.
Benjamin Beck ’16 SE, software engineer, Rockwell Automation, Milwaukee Richard Behnke ’16 EE, design engineer, Macromatic Industrial Controls, Menomonee Falls, Wis. Joseph Betlej ’16 SE, software engineer, [m]pirik, Milwaukee Matthew Bissen ’16 BIOE, manufacturing lab engineer, Catalent Inc., Madison, Wis. Eric Bollerman ’16 CE, software engineer, Rice Lake Weighing Systems, Rice Lake, Wis. Jake Bradley ’16 IE, industrial engineer, C & D Technologies, Milwaukee
Jordan Buss ’16 ME, machine design engineer, Creative Automation, Abbotsford, Wis. Alyssa Caelwaerts ’16 NU, registered nurse, Bellin Health, Green Bay, Wis. Russell Carey ’16 ME, application engineer, Anderson Process, Brookfield, Wis. Zachary Carpenter ’16 ME, manufacturing engineer I / tool engineer, Johnson Controls Inc., Milwaukee Chi-Che Chan ’16 ME, mechanical design engineer, Fischer USA, Racine, Wis. Marcella Chandler ’16 AS, actuarial analyst, Acuity Insurance, Sheboygan, Wis.
Benjamin Brandsmeier ’16 BE, product engineer, Plexus Corp., Neenah, Wis.
Matthew Christenson ’16 ME, maintenance supervisor, Aerotek/Fiat-Chrysler, Schaumburg, Ill.
Kevin Brockman ’16 BE, associate engineer, Wells Vehicle Electronics, Fond du Lac, Wis.
Callie Claerbaut ’16 BE/TC, technical support analyst, Merge Healthcare, Hartland, Wis.
DIMENSIONS x FALL/WINTER 2016-2017
23
ALUMNI ON THE MOVE
The 27th annual MSOE Regents’ Golf Outing raised more than $131,000 for student scholarships. Left to right, Kim and Greg Theodorakis and Bret and Terri McKitrick were among the many golfers who enjoyed the outing.
Jonathan Cory ’16 SE, software engineer, Penrod Software LLC, Milwaukee
Elizabeth Donohew ’16 SE, software developer, Robert W. Baird & Co. Inc., Milwaukee
Trevor Cwiok ’16 EE, electrical engineer, Prescient Wireless, Itasca, Ill.
Sean Donovan ’16 ME, packaging engineer, Motorola Solutions, Schaumburg, Ill.
Zachary Dawiec ’16 AE/CM, electrical design engineer, Faith Technologies, Pewaukee, Wis.
Jeremy Dorn ’16 CE, software engineer, Cummins Allison, Mount Prospect, Ill.
Christopher Derksen ’16 EE, systems design engineer, Astronautics Corp. of America, Milwaukee Thomas Dillman ’16 AE, electrical engineer, RTM Associates, South Barrington, Ill. Anthony DiPerna ’16 SE, software engineer, Penrod Software LLC, Milwaukee Benjamin Dodd ’16 AE, structural engineer, Lien and Peterson Architects Inc., Eau Claire, Wis.
24
Tyler Doyle ’16 CE, firmware engineer, Johnson Controls Inc., Milwaukee Brianna Eales ’16 BIOE, research and development lab technician, Medix Team, Roseville, Minn. Collin Eggert ’16 SE, engineer I, Johnson Controls Inc., Milwaukee Marcus Ellis ’16 MET, plant manager, Federal Tool & Engineering, West Bend, Wis.
DIMENSIONS x FALL/WINTER 2016-2017
Julie Entwistle ’16 NU, pediatric nurse, Children’s Hospital of Wisconsin, Milwaukee
Patrick Gallagher ’16 EE, electrical engineer, Milwaukee Electric Tool Corp., Brookfield, Wis.
Andrew Erdmann ’16 NU, registered nurse, ProHealth Care, Waukesha, Wis.
Cody Ganchar ’16 CV, inside sales engineer, Johnson Controls Inc., Milwaukee
Dana Eriksen ’16 MSEM, production group leader, J.W. Speaker Corp., Germantown, Wis.
Christopher Garcia ’16 AE, electrical engineer, HGA Architects and Engineers, Milwaukee
Josef Esparza ’16 EET, design engineer, Unico Inc., Franksville, Wis.
Juan Garcia ’16 MIS, systems administration specialist, Northwestern Mutual, Milwaukee
Jason Evans ’16 EE, electrical engineer, Aries Industries Inc., Waukesha, Wis. Kyle Fassbender ’16 ME, design engineer, Milwaukee Electric Tool Corp., Brookfield, Wis. Megan Feilbach ’16 CV/ MSCV, structural design engineer I, Kiewit Infrastructure Engineers Co., Englewood, Colo. Ethan Feist ’16 CE, embedded software engineer, Rockwell Automation, Milwaukee Bryce Ferguson ’16 CE, software engineer-AIS platform security, Rockwell Collins, Cedar Rapids, Iowa Jacob Flath ’16 SE, software consultant, Corporate Technology Solutions, Milwaukee Simon Gall ’16 ME, new product development engineer, Milwaukee Electric Tool Corp., Brookfield, Wis.
Jason Genz ’16 EE, design engineer, Snap-on Inc., Kenosha, Wis. Alexandra Graves ’16 IE, quality engineer, Ultra Tool and Manufacturing Inc., Germantown, Wis. Samuel Graves ’16 IE, engineering intern, MillerCoors, Milwaukee Abigail Griffin ’16 EE, patent engineer, Michael Best & Friedrich LLP, Milwaukee Kayla Grogan ’16 TC, associate technical writer, Connecture Inc., Brookfield, Wis. Kyra Gudgel ’16 BIOE, membership director, Healthcare Business Insights, Milwaukee Michael Hammen ’16 MET, mechanical technology engineer, Enercon Industries, Menomonee Falls, Wis.
Alumna creates ‘Pathway’ to success MSOE alumna Jackie (Woestman) Ackerman ’03 is enjoying career success as an entrepreneur in Southeast Asia. She and her husband Brian are the owners of a professional moving and storage business called Pathway Moving Services, based in Yangon, Myanmar. “We like to think of ourselves as engineering efficient moves on a daily basis,” she said. Ackerman knew early on that she wanted to go into business for herself – but she wasn’t sure what type of business until 2011. “I had an administrative job and when our office decided to relocate, it was my responsibility to get estimates from several moving companies,” she said. One company’s salesman made an impression as he spoke to Ackerman about the logistical process. “I started researching the company he represented and I was inspired by the founder’s story.” Ackerman and her husband decided they would have the best chance of success if they started a business in an emerging market. In 2012 they toured several Southeast Asian countries, looking for a void their business could fill. In Myanmar they found the opportunity they’d been searching for. “It’s apparent that we (like most expatriates) can make a difference here,” she said. “Both our clients and our employees are developing a dependency on us as we are fulfilling a legitimate need.”
“An MSOE education gives graduates the tools you need to succeed in
any industry.” “In the two years we’ve been conducting business in this market, we’ve moved offices for American accounting firm PwC (PricewaterhouseCoopers) and German engineering firm SIEMENS,” Ackerman said. “With current expansion into storage and international relocation, and with 15 employees (most pictured below), we are well on our way to achieving our goal of becoming Myanmar’s premier mover.” Ackerman was the first generation in her family to attend college and she wasn’t sure what to expect from the higher education experience. “MSOE stood out as a student-focused university with high educational standards.” Her first experience traveling abroad was at MSOE, when she spent her junior year in Germany at the Lübeck University of Applied Sciences. “I experienced a newfound independence, and my eyes were opened to just how vast the world is.” She graduated with dual diplomas as a result. “An MSOE education gives graduates the tools you need to succeed in any industry,” said Ackerman, who majored in electrical engineering. “I look forward to the day when I can follow in the footsteps of Dr. Eckhart Grohmann and other major donors and make a significant financial contribution to MSOE. It feels right to make a tangible donation to a university that has provided me with such a great foundation to build upon.”
DIMENSIONS x FALL/WINTER 2016-2017
25
ALUMNI ON THE MOVE Andrew Jax ’16 CM, field engineer, Hensel Phelps Construction Co., Seattle Alice Johnson ’16 CE, engineer I, Johnson Controls Inc., Milwaukee Jessica Johnson ’16 AE, mechanical engineer, exp, Chicago Dane Jones ’16 MET, laboratory manager, MSOE, Milwaukee Latisha Jones ’16 ME, design engineer, Schiller Grounds Care, Johnson Creek, Wis. Several alumni gathered to celebrate with Alexsis Mossbrucker ’11 IB and Caleb Coats ’12 ME at their wedding on Aug. 20, 2016. Back, left to right: Kyle Pace ’12 ME, Sebastian Borgerding ’12 ME, James Franke ’12 ME, Noah Sesing ’10 ME, Scott Beckord ’11 AE. Front, left to right: Ghislain Schneider ’12 ME, Laura Ramthun ’12 IB, Coats, Mossbrucker, Kelly (Costello) Gunn ’10 AE, Kathryn Thielen ’12 CM, Kristin Kolpin ’10 IB, Ashley Bauer ’11 BUS and Jolisa Gold ’11 CM.
Christian Hanson ’16 NU, registered nurse, Horizon Home Care, Milwaukee, Wis. Amber Harmon ’16 MSP, perfusionist, Essentia Health, Duluth, Minn. Elizabeth Hartung ’16 NU, registered nurse, Wheaton Franciscan Health, Milwaukee Dylan Havermeyer ’16 SE, software engineer, GE Healthcare, Hartford, Wis. Megan Hayes ’16 AE/MSST, project engineer, Computerized Structural Design SC, Milwaukee Adam Heffington ’16 AE/ CM, electrical engineer, Faith Technologies, Madison, Wis.
26
Kayla Helbig ’16 EE, electrical designer, Oneida Total Integrated Enterprises, Milwaukee
Derek Hummel ’16 CM, project engineer, Pepper Construction, Barrington, Ill.
Connor Henke ’16 SE, software engineer, Eatstreet, Madison, Wis.
Karl Hundt ’16 ME, research and design engineer, MacDon Industries, Winnipeg, Manitoba, Canada
Andrew Hensch ’16 MSE, design engineer II, Wacker Neuson, Menomonee Falls, Wis.
Nicholas Jablonski ’16 ME, estimator, Martin Peterson Co., Kenosha, Wis.
Edward Hinsa ’16 CV, technology consultant analyst, Accenture, Chicago
Brandon Jackson ’16 SE, consultant, Corporate Technology Solutions, Milwaukee
Skyler Hokkanen ’16 ME, field service engineer, Power Test Inc., Sussex, Wis. Ersun Hopi ’16 EET, field safety engineer, Rockwell Automation, Milwaukee
DIMENSIONS x FALL/WINTER 2016-2017
Tim Jacobson ’16 EE, commissioning engineer, American Transmission Co., Waukesha, Wis. Brian Janus ’16 CV, project engineer, F.H. Paschen Construction, Chicago
Travis Jones ’16 EE, order engineer, Yaskawa America Inc., Oak Creek, Wis. Andre Kaiser ’16 EE, electrical engineer, Bemis Healthcare Packaging, Oshkosh, Wis. Kyle Kaja ’16 CE, software engineer, Cognex Corp., West Allis, Wis. Brock Karls ’16 ME, test and development engineer, Oshkosh Defense, Oshkosh, Wis. Kevin Keating ’16 AE, commissioning engineer, The Hill Group, Franklin Park, Ill. Dylan Keegan ’16 SE, software engineer, ProShip Inc., Brookfield, Wis. Brittany Kelley ’16 EE, control systems engineer I, Dematic Corp., New Berlin, Wis.
Amber Kent ’16 EE, electrical/electronic engineer, B/E Aerospace Inc., New Berlin, Wis. Max Kent ’16 ME, field service engineer, Jennerjahn Machine, Matthews, Ind. Alexander Kiel ’16 EE, electrical engineer, 3DT LLC, Germantown, Wis. Frederick Kimball ’16 SE, application development specialist, Northwestern Mutual, Milwaukee Kyle Klamar ’16 MBA, senior applications engineer, ACRO Automation Systems Inc., Milwaukee Kevin Koenig ’16 MIS, assistant IT manager, City of Oak Creek, Oak Creek, Wis. Ryan Koenig ’16 AE, mechanical engineer, HGA Architects and Engineers, Milwaukee Collin Kohls ’16 ME, design engineer, Snap-on Inc., Kenosha, Wis. Amber Korn ’16 ME, leadership development program engineer, Eaton Corp., Milwaukee Kyle Korn ’16 ME, reliability engineer, Milwaukee Electric Tool Corp., Brookfield, Wis. Timothy Koruna ’16 CE, associate firmware engineer, Rockwell Automation, Milwaukee
Christian Kramer ’16 ME, development engineer, EDM Department Inc., Bartlett, Ill.
Nicolas Lopez ’16 SE, software engineer I, Direct Supply Inc., Milwaukee
Megan Kroll ’16 ME, technical excellence program engineer, Rexnord, Milwaukee
Shannon Mahoney ’16 BE, development engineer, Zimmer Inc., Warsaw, Ind.
Andrew Kryca ’16 ME, applications engineer, Felsomat USA Inc., Schaumburg, Ill.
Ian Mahuta ’16 SE, programmer analyst I, Infosoft Group, Milwaukee
Ashley Ksioszk ’16 EE, Edison engineer, GE Healthcare, Waukesha, Wis.
Katrina Maki ’16 AE/CM, electrical engineer, Ring & DuChateau, Brookfield, Wis.
Jonathan Kuderer ’16 ME, mechanical engineer, Affiliated Engineers Inc., Phoenix
Nicholas Mantych ’16 EE, electrical engineer, Milwaukee Electric Tool Corp., Brookfield, Wis.
Briel Larson ’16 NU, nurse extern III, Froedtert Hospital, Milwaukee Michael Laskowski ’16 AE/ CM, field engineer, Mortenson Construction, San Antonio, Texas
Landon Mara ’16 IE, operations analyst, Direct Supply Inc., Milwaukee Matthew Martin ’16 SE, software engineer, ProShip Inc., Brookfield, Wis.
Benjamin Miller ’16 ME, test engineer – gas engines Americas, Kohler Co., Kohler, Wis. Torsten Molina ’16 EE, hardware engineer, Syracuse Research Center, Syracuse, N.Y. Nathan Monteverde ’16 AE, designer I, Excel Engineering Inc., Fond du Lac, Wis. Shane Mossman ’16 BIOE, micro lab specialist, Kleen Test Products, Port Washington, Wis. Benjamin Mueller ’16 ME, IMSA race operations intern, Pratt & Miller Engineering, New Hudson, Mich. Robert Mueller ’16 ME, engineering associate, Underwriters Laboratories, Northbrook, Ill. Kasey Mylin ’16 BE, project engineer, Woodway USA, Waukesha, Wis.
Kevin Lee ’16 ME, EEDP engineer, GE Healthcare, Milwaukee
Ana Sofia Larraga Martinez ’16 IB, associate buyer, Uline, Pleasant Prairie, Wis.
Jacklyn Lesser ’16 AE/MSST, designer I, Excel Engineering Inc., Fond du Lac, Wis.
Randy Marvin ’16 EE, construction coordinator, Planet Forward, Milwaukee
Gabriel Nelson ’16 CV/ MSCV, civic design engineer, American Transmission Co., Waukesha, Wis.
Jingyuan Liang ’16 EE, electrical engineer, Milwaukee Electric Tool Corp., Brookfield, Wis.
Ellen Meinholz ’16 MBA, director of marketing, A3 Performance, Oconomowoc, Wis.
Mitchell Neuhoff ’16 ME, turbine engineer, Toshiba American Energy Systems, West Allis, Wis.
Almedia LoBue ’16 NU, registered nurse, University of Kansas Hospital, Kansas City
Maxwell Merget ’16 EE, electrical engineer, Milwaukee Electric Tool Corp., Brookfield, Wis.
Rebecca Nielsen ’16 NU, registered nurse, Pine Rest Southwest Clinic, Grandville, Mich.
Adam Mikkelsen ’16 ME, product engineer, Fairbanks Morse Engine, Beloit, Wis.
Kristi Noll ’16 NU, registered nurse – NICU, Froedtert Hospital, Milwaukee
Bradley Logsdon ’16 MSNP, marketing manager, Miller Electric Mfg. Co., Appleton, Wis.
DIMENSIONS x FALL/WINTER 2016-2017
27
ALUMNI ON THE MOVE Evan Nondorf ’16 EE, engineer I, Johnson Controls Inc., Milwaukee Alain Nsoga ’16 EET, field service engineer, Sonoscan Inc., Elk Grove, Ill. Fabrice Nyanjo ’16 EE, test engineer, Ultratec Inc., Madison, Wis. Bilal Nyazi ’16 ME, project manager, Saudi Aramco, Dhahran, Saudi Arabia Aubrey O’Neill ’16 EET, associate application engineer, Rockwell Automation, Milwaukee Seth Opgenorth ’16 CE, embedded firmware developer, Yaskawa America Inc., San Francisco Zachary Paquin ’16 BIOE, junior validation engineer, Kleen Test Products, Port Washington, Wis. Tyler Parisi ’16 CM, project manager, Martin Petersen Co., Kenosha, Wis. Emily Patzer ’16 NU, registered nurse – endoscopy, Wheaton Ascension All Saints Hospital, Racine, Wis. Mia Pelowski ’16 CV, technical sales engineer, Johnson Controls Inc., Milwaukee Martin Plohocky ’16 EET, regulatory engineer, Milwaukee Electric Tool Corp., Brookfield, Wis.
28
Alec Polovchak ’16 BIOE, monoclonal antibody manufacturing specialist, Abbott Labs, Abbott Park, Ill. John Ponio ’16 CE, software design engineer, S&C Electric, Franklin, Wis. Sarah Popovich ’16 NU, registered nurse, St. Luke’s Medical Center, Milwaukee
Daniel Reyes ’16 IE, industrial engineer, Bridgestone Americas, Morrison, Tenn. Aaron Rick ’16 CE, computer engineer, Tapco Inc., Brown Deer, Wis. Ryan Ringeisen ’16 AE, field engineer, Hensel Phelps Construction, Greeley, Colo.
Matthew Post ’16 EE, concept engineer, Milwaukee Electric Tool Corp., Brookfield, Wis.
Matthew Rink ’16 ME, systems application engineer, Johnson Controls Inc., Tempe, Ariz.
Zachary Posten ’16 SE, engineer I, Johnson Controls Inc., Milwaukee
Adrian Robillard ’16 ME, design engineer, Snap-on Inc., Kenosha, Wis.
Corey Pruess ’16 ME, procurement analyst, Modine Manufacturing, Racine, Wis.
Jasmine Rocha ’16 NU, graduate nurse, Aurora St. Luke’s Hospital, Milwaukee
Brent Radlinger ’16 ME, design engineer, Oshkosh Corp., Oshkosh, Wis.
Evan Ronayne ’16 SE, engineer I, Johnson Controls Inc., Milwaukee
Michael Rajzer ’16 EE, design engineer, Snap-on Inc., Kenosha, Wis.
Alexander Root ’16 MIS, enterprise web services intern, Federal Reserve Bank of Chicago, Chicago
Elliott Rashed ’16 ME, manufacturing engineer, Silgan Containers, Oconomowoc, Wis. Nicholas Ratkowski ’16 ME, associate engineer, United Conveyor Corp., Waukegan, Ill. Michael Reader ’16 ME, applications engineer, Precision Plus, Elkhorn, Wis. Kathryn Ready ’16 IE, industrial engineer, Kohler Co., Kohler, Wis.
DIMENSIONS x FALL/WINTER 2016-2017
Collin Ross ’16 AE/MSST, structural engineer, Harwood Engineer Consultants, Milwaukee Michelle Roubik ’16 EE, electrical design engineer, Astronautics Corp. of America, Milwaukee
Megan Ryan ’16 NU, registered nurse, Wheaton Franciscan Hospital, Milwaukee Michael Ryan ’16 EE, controls engineer, Temple Control System, Milwaukee Ryan Saari ’16 CE, automation engineer, TriCore Inc., Racine, Wis. Gerardo Sanchez ’16 ME, field service technician, Multipond America, Green Bay, Wis. Cortney Scheckel ’16 IE, channel sales representative, Pentair, Delavan, Wis. Orion Schemenauer ’16 SE, research and development assistant, Dedicated Computing, Waukesha, Wis. Evan Schiavone-Jacobson ’16 SE, associate software developer, Advicent Solutions, Milwaukee Elizabeth Schmitt ’16 IE, engineer I, FedEx SmartPost, Brookfield, Wis. Kyle Schommer ’16 EE, electrical engineer, Mead & Hunt, Middleton, Wis. Timothy Schultz ’16 ME, product development engineer, Caterpillar, Milwaukee
Devin Runner ’16 ME, engineer I, Jagemann Stamping, Manitowoc, Wis.
Scott Seidel ’16 EE, technology analyst, Accenture, Chicago
Kadee Russell ’16 NU, nurse extern, Aurora St. Luke’s Medical Center, Milwaukee
Yahya Sendi ’16 EE, electrical engineer, Rockwell Automation, Milwaukee
Arthur Siebel ’16 ME, technical specialist, Foley and Lardner LLP, Milwaukee James Simonson ’16 CM, field engineer, M.A. Mortenson Co., Minneapolis David Skwarek ’16 EET, technical specialist II – electrical, QuadTech, Sussex, Wis.
Everyone is nervous before their final exam for speech class, but mechanical engineering major Trent Ristow was a little more nervous than most. He had a ring in his pocket. And his guest, girlfriend Gina Fox, had no idea that he would end the speech, an award presentation honoring her work as a nurse, with a proposal of marriage. Gina did say yes, but only after Trent nudged her to look at the certificate, which read, “Gina Fox, The Greatest Woman in the World, Will You Marry Me?” “We had plenty of great speeches that morning, but Trent’s got the most applause, and deservedly so,” said Margaret Dwyer, adjunct assistant professor.
Evan Sendra ’16 SE, software developer, Casenet s.r.o., Prauge, Czech Republic Marina Sharp ’16 AE, mechanical engineer, HGA Architects and Engineers, Milwaukee Brandon Shea ’16 AE/MSST, structural engineer, Anderson Ashton Inc., New Berlin, Wis. Bradley Shearer ’16 EE, controls engineer, Dematic Corp., New Berlin, Wis.
Joshua Sohn ’16 ME, product manager/product development engineer, Phoenix Products Co. Inc., Milwaukee Camille Somberg ’16 NU, registered nurse I, Wheaton Franciscan St. Joseph’s Hospital, Milwaukee Ruth Spragins ’16 AE, electrical designer, exp, Orlando Cameron St. Clair ’16 ME, associate engineer, ATI Forged Products, Milwaukee Kyle Stone ’16 ME, reliability specialist, L&S Electric Inc., Appleton, Wis. Samuel Suter ’16 CM, estimator, Modern Piping Inc., Cedar Rapids, Iowa Ryan Swan ’16 MIS, IT programmer/analyst, Legendary Whitetails, Slinger, Wis. Kai Swanson ’16 ME, application engineer, Aquarius Technologies, Port Washington, Wis. Andrew Swiechichowski ’16 ME, inside sales engineer, Johnson Controls Inc., Milwaukee
Matthew Taylor ’16 EE, research and development project engineer, Visa Lighting, Milwaukee
Nathan Verdun ’16 AE/ MSST, structural engineer I, Kiewit Engineering & Design Co., Lenexa, Kan.
Braden Thiel ’16 EE, electrical engineer, C3 Corp., Appleton, Wis.
Val Jason Visalda ’16 MIS, information technology associate LDP, Rockwell Automation, Milwaukee
Benjamin Thomas ’16 IE, inside sales engineer, Johnson Controls Inc., Milwaukee Alana Tirimacco ’16 BE, product validation engineer, Smiths Medical, Plymouth, Minn.
Brittany Vitkovich ’16 AE, field engineer, M.A. Mortenson Co., Minneapolis Abigail Vogt ’16 NU, nurse residency, Zablocki VA Medical Center, Milwaukee
Ashley Toll ’16 BE, technical problem solver, Epic Systems Corp., Verona, Wis.
Brett Vollmer ’16 CM, field engineer, The Boldt Co., Appleton, Wis.
Richard Tongue ’16 ME, pipeline integrity engineer, NuStar Energy LP, San Antonio, Texas
John Von Helms ’16 ME/BM, applications engineer, Radyne Corp., Milwaukee
Hannah Torvick ’16 EE, legal specialist/patent engineer, Quarles & Brady LLP, Milwaukee Sean Van Eysden ’16 ME, patent engineer, Michael Best & Friedrich LLP, Milwaukee Caleb Varebrook ’16 EE, electrical design engineer, Appleton Marine, Appleton, Wis. Samantha Varso ’16 MSP, perfusionist, Specialty Care, Canton, Ohio Michael Venturini ’16 CV, structural engineer, Computerized Structural Design, Milwaukee
Samuel Voss ’16 CE, platform security engineer, Rockwell Collins, Cedar Rapids, Iowa Johanna Wang ’16 AE, mechanical engineer/project manager/estimator, JM Brennan Inc., Milwaukee John Ward ’16 BSE, product engineer, J.W. Speaker Corp., Germantown, Wis. Hannah Weiger ’16 NU, registered nurse, Froedtert Hospital, Milwaukee Matthew Weinke ’16 NU, registered nurse, Aurora St. Luke’s Hospital, Milwaukee Rachel Wellnitz ’16 BE, operations management leadership program participant, GE Healthcare, Waukesha, Wis.
DIMENSIONS x FALL/WINTER 2016-2017
29
ALUMNI ON THE MOVE Nicholas Wicker ’16 CE, embedded engineer, Ultronic Systems, Menomonee Falls, Wis. Eli Wittman ’16 SE, software developer, Epic Systems Corp., Verona, Wis.
Births To Gary Armstrong ’73 FPET, a grandson, Cody Ryan, born on Oct. 20, 2015.
Kaitlyn Wolf ’16 BE, mechanical engineer I, Smiths Medical, Plymouth, Minn.
To Charlotte and Dominic Perz ’04 EE, a son, Jackson, born on Aug. 10, 2016.
Mark Hale ’91 ME, received an Alumni Achievement Award from MSOE.
To Julia and Adam Friedman ’08 AE, ’09 MSST, a son, Carter Douglas, born on June 19, 2016.
Richard Budzinski ’93 BMS, has been named to the Board of Examiners for the Commerce Department’s National Institute of Standards and Technology and has received the Malcolm Baldrige National Quality Award for 2016. The Baldrige Award is the nation’s highest honor for organizational innovation and performance excellence.
Wesley Wolfram ’16 ME, ensign, United States Navy, San Diego Brandon Yahr ’16 ME, product engineer, J.W. Speaker Corp., Germantown, Wis. Elizabeth Young ’16 BE, MDR specialist, Medtronic, Minneapolis
Kim Pettiford ’93 IE, ’99 MSEM, received an Alumni Achievement Award from MSOE.
To Margaret and Andrew Byrom ’96 EE, twin boys, Connor Isaac and Logan Daniel, born on May 5, 2016. To Doug and Pamela Seiler ’14 MSEM, a son, Leopold Douglas, born on June 8, 2016.
David Zelazo ’16 EET, program manager, Astronautics Corp. of America, Milwaukee
Adam Doubblestein ’99 AE, has been named to the board of directors of TowerPinkster, Grand Rapids, Mich.
Marriages Jonathan Pfantz ’06 AE married Kaili Mays on Feb. 6, 2016. Cameron Puetz ’08 AE married Elizabeth Miller on Aug. 15, 2015. Stephanie Drozek ’11 ME married Joe Gries ’11 CE on Sept. 10, 2016.
Eric Waydick ’03 EE, received a Master of Science in Engineering from MSOE on May 28, 2016.
To Andrew and Kera (Vant) West ’00 BE, a daughter, Alison Marie, born on Sept. 14, 2015.
Joseph Westrich ’11 AE married Courtney Klaas ’14 BE on June 4, 2016. Brianna Gardner ’12 NU married Ryan Hovey on June 18, 2016.
30
Eric Durant, Ph.D. ’98 CE/ EE, became a licensed Professional Engineer in the state of Wisconsin.
DIMENSIONS x FALL/WINTER 2016-2017
To Jennifer and Evan Draeger ’15 ME, ’16 MBA, a son, Graham, born on Jan. 24, 2016.
Achievements Kurt Drier ’91 CS&E, was named MSOE’s 2016 Distinguished Alumnus of the Year.
Mechelle King ’04 BUS, received an Alumni Achievement Award from MSOE. Justin DeLany ’06 IE, ’15 MSEM, received an MBA from MSOE on Sept. 3, 2016. Kyle Klamar ’06 ME, received an MBA from MSOE on May 28, 2016.
2016 Renee Mihopulos ’11 NU, received a Master of Science in Nursing from MSOE on May 28, 2016. Leigh Ann Pochowski ’11 NU, received a Master of Science in Nursing from MSOE on May 28, 2016.
2016 This year’s Summer in the City alumni reunion was a rousing success, with 423 alumni and friends in attendance. They enjoyed a variety of events including campus tours, breakfast with President John Y. Walz, Ph.D., networking, educational events and more. New this year, Alumni Achievement Awards were presented to Mark Hale ’91, Mechelle King ’04 and Kim Pettiford ’93, ’99. Kurt Drier ’91, pictured below with his wife Erin and their daughter Makenzie, was named the 2016 Distinguished Alumnus of the Year. Watch videos of the award presentations at youtube.com/msoeweb/videos.
Shanna Cowman ’12 AE, received a Master of Science in Structural Engineering from MSOE on May 28, 2016. Jefferson Leach ’12 ME, earned a Master of Science in Engineering from MSOE on Sept. 3, 2016. Kelly Seebach ’13 NU, received a Master of Science in Nursing from MSOE on May 28, 2016. Megan Waelti ’13 BM, received an MBA from MSOE on May 28, 2016.
Alumnae from the Milwaukee County General Hospital School of Nursing class of 1966 reminisced about their days in nursing school. Pictured left to right are: Jane Wedel Taufner, Nancy Hatzinger Perez and Penny Gease Papenfus.
Anthony Brown ’14 EE, received a Master of Science in Engineering from MSOE on May 28, 2016. David Carrimon ’14 EE, received a Master of Science in Engineering from MSOE on May 28, 2016. Dana Eriksen ’14 IE, earned a Master of Science in Engineering Management from MSOE on Feb. 27, 2016.
The inaugural Matt Stachelski ’11 Memorial Bike Ride honored the memory of Stachelski, a technical communication alumnus who had a passion for cycling, and raised money for a scholarship in his name.
2016
Daniel Laska ’14 ME, received a Master of Science in Engineering Management from MSOE on May 28, 2016. Duc Nguyen ’14 SE, received a Master of Science in Engineering Management from MSOE on May 28, 2016. DIMENSIONS x FALL/WINTER 2016-2017
31
Evan Draeger ’15 ME, received an MBA from MSOE on May 28, 2016. Abhishek Shah ’15 ME, received a Master of Science in Engineering from MSOE on May 28, 2016.
In Memory Margaret (Klussendorf ) Bayley ’45 NU Edwin Skippar ’48 ELT James Northrop ’50 PE Sylvester Stuiber ’50 EEP Robert Krohn ’51 EEE Marlyss Erickson ’52 NU Ralph “Iver” Anderson ’57 RTT Wayne Nehls ’57 MF Carl Bishop ’58 EEE Robert Wendelburg ’61 EPET David Perlstein ’63 EEC
Bill Daniels, MSOE custodian, passed away Aug. 22, 2016. Waldemar Gerassimoff, former professor in MSOE’s Electrical Engineering and Computer Science Department, passed away July 5, 2016.
How will you design
your legacy?
Darrell Seeley, former professor in MSOE’s Physics and Chemistry Department, passed away Aug. 12, 2016. Helena Kecman Lorbeck Vucicevic, former Milwaukee County General Hospital School of Nursing faculty member, passed away Sept. 7, 2016. Aimee (Langley) Wallace, former student and MSOE custodian, passed away Sept. 9, 2016. Doug Ziegler, D. Bus. Econ. (Hon.), MSOE Corporation member, passed away March 5, 2016.
William S. Knight ’70 MET Antoine Durocher ’71 ME John Oliva ’71 ME David J. Miller ’73 ACET, ’76 MET, ’82 MSEM Christopher Kurek ’77 ECET Kathleen Tesker ’77 MEM Daniel Clapham ’79 EET Michael Del Ponte ’84 EET Paul Sampson ’84 EET Derrick Dilley ’94 AE
You have the opportunity to design your legacy and invest in a place like no other. Planned gifts help strengthen and preserve MSOE. Your gift will allow you to touch the future and support the education of those to come. Visit msoe.edu/plannedgiving to explore the many ways you can leave your mark on MSOE. The website has been updated and includes many planning tools to help you get started. Contact Ted Fitzpatrick, MSOE’s director of planned giving, to learn more at (414) 277-7148 or fitzpatrick@msoe.edu.
msoe.edu/plannedgiving 32
DIMENSIONS x FALL/WINTER 2016-2017
Nothing Short of Sweet
Dr. Cynthia Barnicki of Mechanical Engineering, Dr. Anne-Marie Nickel of Physics and Chemistry and Dr. Katherine Wikoff of Humanities, Social Science and Communication teamed up to investigate how the study of chocolate could enhance engineering education and their findings were nothing short of sweet. From classroom labs to senior projects, chocolate proved a rich source of educational material; so much so that the three co-authored a paper about the subject. The American Society for Engineering Education (ASEE) invited them to speak at the annual conference in June. “Chocolate is a topic that everyone gets excited by,” Wikoff said. “It’s an imagination-sparker.”
The spark was many years in the making for Barnicki, whose family has a tradition of making Christmas fudge. When Barnicki’s father passed away she wanted to continue the tradition and surprise her siblings with fudge. Gift certificates might have been a better option. “I ruined two batches of fudge in two different ways,” Barnicki said. But all wasn’t lost and she made a connection. “In courses I teach we look at how phase transformations occur in different materials. This was the exact same thing—a way of looking at nucleation.” In 2012 she was asked to prepare a Welcome Week presentation. “I researched different candies—caramel, fudge, fondant—then I really started to learn.” Barnicki found a kindred spirit in Nickel, who started teaching a Food Chemistry course in 2013. “I had a lot of students who grew up watching the Food Network so I wanted to build from that,” Nickel said. “Chocolate is a unique food. Its molecular structure affects its physical
properties—such as melting point and hardness.”
Nickel and Barnicki expanded the reach of their research in 2015, when they were awarded a $2,500 grant to take what they’d learned out into the community. They partnered with St. Joan Antida High School, where Nickel is a science coach through her involvement with the American Chemical Society. Nickel formed a partnership with Milwaukee artisan chocolate-maker Dan Bieser of Tabal Chocolates, who spoke to her Food Chemistry students. Tabal is what’s known as a bean-tobar chocolate manufacturer. “The chemistry of the beans as well as the chocolate is very complex,” Bieser said. “You are dealing with sugar and fat crystals that are very sensitive to temperature; tempering is what gives chocolate its snap and shine.” The relationship with Tabal resulted in two senior design projects. One project focused on a cocoa butter press (pictured below), while the other developed a second-generation cracking and winnowing machine, which is currently in use. “I am thrilled with it,” Bieser said. Additional project ideas have been submitted for the 2016-17 school year.
Another curriculumworthy topic that emerged from the chocolate research was the far-reaching economic implication of materials use. “Ethics and sustainability are issues that are associated with all materials,” said Wikoff. “But because chocolate is so familiar to students it provides a nice starting point for them to look outwards and see that engineering decisions take place within a much larger context.”
Learn more about the related senior projects at msoe.edu/dimensions. DIMENSIONS x FALL/WINTER 2016-2017
33
Dimensions Fall/Winter 2016-2017 Milwaukee School of Engineering 1025 North Broadway Milwaukee, WI 53202-3109 Change Service Requested
Get MSOE news delivered to your inbox! Sign up to receive the monthly Alumni E-news newsletter at msoe.edu/alumni.
MSOE is Nationally Recognized Best ROI of all colleges and universities in Wisconsin
10th Best Undergraduate Engineering Program Nationwide -U.S. News & World Report, 2017
Best Bang for the Buck Midwest College -Washington Monthly
Best in the Midwest -The Princeton Review
Best Foreign Student Factor in the Midwest
-PayScale 2016 College ROI Report
8th Best Value University in the Midwest -U.S. News & World Report, 2017
11th Best University in the Midwest -U.S. News & World Report, 2017
America’s Top Colleges -Forbes
#1 Best Value College in Wisconsin
-U.S. News & World Report, 2017
-SmartAsset survey
11th Best University in the Midwest for Veterans -U.S. News & World Report, 2017
Highest average early-career salaries of all colleges and universities in Wisconsin
Best Engineering Programs and #2 Actuarial Science degree in U.S.
-PayScale 2015-16 College Salary Report
-College Choice