Creativo Seamless wall and flooring system

A new life for your environments CREATIVO® is the ideal system for the creation of luxury and trendy seamless surfaces.

CREATIVO® is suitable to be applied on walls, floors, booth indoor and outdoor, for residential, commercial or industrial use, bathrooms, shower rooms, bath tubs, counter tops, furniture, sinks, underfloor heating floorings, balconies and interior furnishing items.

CREATIVO® is a high performance system that guarantees high adhesion to surfaces, resistance to flexion, compression, abrasion and scratches.

CREATIVO® is resistant to alkaline detergents, acids and the most common detergents used in residential and commercial cleaning.

CREATIVO® is HACCP certified, that allows its use when high hygiene are required (food rooms or medical environments) and it’s CE certified according to regulation UNI EN 13813.

CREATIVO® is a practical and easy system in Urban Regeneration.

CREATIVO® is easy to apply thanks to a minimal DFT (total system thickness around 2-3 mm) thus allowing to save the cost of adapting the interior fittings (doors, windows) to the a new flooring system.

CREATIVO® is sustainable and ecofriendly as it’s applied directly on screed and/or ceramic surface avoiding its removal and disposal.

CREATIVO® is formulated with raw materials that have the lowest impact on the environment, maintaining high protection and resistance, in order to have an increased welfare.

A division of Colorificio MP srl

CREATIVO® is a true Made in Italy product, that combines high quality and design.

CREATIVO® is compliant with the regulations for the attainment of credits according to LEED and GBC certifications.

Via G. Pastore, 2 Viserba 47922 Rimini (RN) - Italy Ph.: +39 0541 734086 | Fax: +39 0541 734282 www.mp-paints.com | mp@mp-paints.com

CREATIVO® doesn’t release any harmful emission and obtained the “A+” classification (the best according to French regulation for emissions in bordering environments).

CREATIVO® has low water absorption and medium vapour permeability characteristics. The high mechanical resistances allow the use of forklifts on it.

CREATIVO® has a high degree of skid resistance, with a dynamic friction coefficient, both in wet and dry conditions, within the requirements of Italian Ministry Regulation 1989 no. 236.

CREATIVO® is available with an endless range of colours easily achievable with COLORPLUS® tinting system: choose the right colour for your environment from Armonie d’Interni colour chart.

COLORIFICIO MP srl Via Pastore, 2; 47922 Viserba - Rimini (RN) — Italy

www.creativo-microcemento.it www.creativo-microcement.com

15 UNI EN 13813 CT-C25-F7-AR0,5 Floor screeds and screed materials Reaction to fire: Corrosive substances release: liquid water permeability: water-vapour transmission rate: Flexural strength: Compressive strength: Wear resistance-BCA: Sound Insulation: Sound absorption: Thermal resistance: Chemical resistance:

Ffl CT NPD NPD F7 C25 AR0,5 NPD NPD NPD NPD

Azienda con sistema di gestione qualità certificato da DNV GL = ISO 9001 =

HACCP

HAZARD ANALYSIS CRITICAL CONTROL POINT ÉMISSIONS DANS L’AIR INTÉRIEUR*

A

B

C

Creativo ® FO + M

Microcement and resin system for the creation of horizontal and vertical seamless surfaces.

FO > CREATIVO ® FONDO Microfibrated mortar in paste form based on coarse mineral aggregates, resins and special additives. Before use, mix CREATIVO ® FONDO with CREATIVO ® MICROCEMENTO. FI > CREATIVO ® FINITURA Microfibrated mortar in paste form based on thin mineral aggregates, resins and special additives. Before use, mix CREATIVO ® FINITURA with CREATIVO ® MICROCEMENTO.

SYSTEM APPLICATION

“A

man travels the world over in search of what he needs and returns home to find it.

“

GEORGE AUGUSTUS MOORE

FI + M

P

A+B

M > CREATIVO® MICROCEMENTO Powder based additive for CREATIVO ® FONDO and CREATIVO ® FINITURA. Guarantees high resistance and flexibility performances.

P > CREATIVO® PRIMER Acrylic microemulsion with high penetrating and consolidating characteristics. Ideal to reduce absorbency of CREATIVO® TOP. A / B > CREATIVO® TOP Special two-pack polyurethane water based finish: available MATT, SATIN and GLOSS, protects the surfaces for a long time.

2/3 mm

STEP 1 Mix CREATIVO® FONDO and CREATIVO® MICROCEMENTO (2:1 ratio) until a smooth creamy paste is obtain; apply the mixture with a stainless steel trowel avoiding high thickness.

After around 8 hours sand and vacuum the surface. Apply a second coat in the same way.* STEP 2 Mix well CREATIVO ® FINITURA and CREATIVO® MICROCEMENTO (2:1 ratio) until a smooth creamy paste is obtain; apply the mixture with a stainless steel trowel avoiding high thickness. After around 8 hours sand and vacuum the surface. Apply a second coat designing the surface with the suitable technique to obtain the desired finish.* STEP 3 CREATIVO® PRIMER is ready to use. Applied by roller after waiting 8 hours from the last coat of CREATIVO® FINITURA. As an alternative, it is possible to use a decorative paint from the Stile Italiano (for more information, check TdS).

* Once the two components are mixed, the mixture has a pot life of 1,5 hours. Don’t wet treated surfaces before application. We recommend use of shoecovers.

STEP 4 STEP 3 STEP 2 STEP 1

STEP 4 Mix well CREATIVO® TOP component A with component B and apply with a special Mohair roller homogeneously and carefully on the surface. Wait between 6 and 24 hours and apply a second coat without sanding the surface. On bath tubs, sinks, shower rooms or outdoor, apply a third coat of CREATIVO® TOP. Wait 24/36h before walking on the surface.

AVAILABLE COLOURS CREATIVO ® is available with an endless r ange of col our s ea s i l y a chi eva b l e w i t h COLORPLUS® tinting system: choose

the right colour for your environment from Armonie d’Interni colour chart.