Missouri Vinyl Products 2023 Catalog

IMPORTANT, PLEASE READ!

Policies & Procedures

Order Through Main Office

Place orders with main office or email at orders@movinyl.com

PHONE : 573-860-7600

FAX: 314-754-9960

OFFICE HOURS

M-F 7:00 - 4:00

All prices subject to change without notice. Please verify all confirmations.

$750 Minimum Order Required for Prepaid Freight

Orders less than $750 will be subject to freight charges or may be held until additional orders accumulate reaching $750 or more.

Order Cut Off

Place orders 2 full business days before your scheduled delivery day.

Delivery Day: Order By:

Monday End of day Wednesday

Tuesday End of day Thursday

Wednesday End of day Friday

Thursday End of day Monday

Friday End of day Tuesday

Special Delivery

NOTE: Fence, Custom , and/or Gate orders, depending on size and style, will require additional lead time.

If delivery is requested sooner than your regular delivery day, the order will be subject to freight charges regardless of order size.

Returns

A 20% restock fee will be charged on all returns.

NO returns accepted after 60 days of invoice date.

NO returns on gates, Vista rail, pergola, fence or custom work.

NO returns on pickets/balusters out of any sections.

Additional Resources

Visit movinyl.com for information regarding installation and warranty.

Venture decking

Research Report #RR-0100

Grooved Edge

Solid Edge

Venture Series features a lobed bottom profile and is 15/16" thick. Other series are 7/8" thick. Advised not to mix with other series when using Venture.

Visit Deckorators.com for installation instructions.

Venture series is a directional grain pattern. Each board has a unique appearance and should be arranged according to the end user’s preference.

For best results and strongest hold, the plug system must be used in the thickest part of the board.

Sandbar (SB)

Saltwater (SW)

Vault decking

Research Report #CCRR-0195

Grooved Edge Solid Edge

These profiles are the same for Vista, Vault and Voyage

Vault decking also features a water and ground contact warranty.

Dusk (DK)

Mesquite (MQ)

Research Report #CCRR-0195

Made with Eovations Technology Voyage decking

Varied-width decking is available in 31/2", 7¼" and 9¼" widths by special order only. Broken bundle/packaging charges will apply to all special orders.

Voyage decking also features a water and ground contact warranty.

Khaya (K)

Picture Frame & Porch Floor

P icture F rame B oard 12' 21'

Dark Slate color, solid edge - 5 1/2"

Dark Slate color, solid edge - 7 ¼"

Riser (1/2" x 8" - 12')

Fascia (1/2" x 11 1/4" - 12')

MBC Porch Floor

7/8" x 3 1/2" - 12' - T&G

7/8" x 3 1/2" - 16' - T&G

7/8" x 3 1/2" - 12' - Solid Edge

Made with EovationsTM technology. Non-reversible wood grain surface for slip resistance. Can be installed in contact with the ground or water. Made from a blend of polypropylene and mineral filler which delivers superior strength.

Porch floor has a 3 1/8" finished measurement.

Kettle (K)

Chicory (C)

*Chicory is a verigated color. Kettle is solid color. Please

Fasteners & dexerdry

Fasteners For

Hidden Fastener Systems

Stowaway Clips - 90 clips/box

(enough for 50 sq ft)

Stowaway Clips - 525 clips/box

(enough for 300 sq ft)

TC-G Fasteners - 90 clips/box

(enough for 50 sq ft)

Butt Joint Fastener - 55 clips/box

(“Reversed” TC-G - recommend for all butt joints )

TC-G Bucket - 900 clips/box

(enough for 500 sq ft - NO SCREWS)

Pneumatic Screw Pack - 930/box

(use with TC-G Bucket - 500 sq ft)

Stowaway Clips

Stowaway's allow about a 1/4" gap

SHF-50

SHF-300

TCG-50

TCG-BJ

TCG-500

TCG-P

TC-G Fastener

TC-G's allow about a 3/16" gap

Color Match S/S Screws for METAL Framing

1 5/8" S/S Screws - 100 ct S104-_Metal

Stocked in all Deckorators decking colors. Specify color.

dexerdry system

Please specify deck color when ordering

Pro Plug System

Color match decking/ Porch Floor plugs*

DP-_

*Each package includes 165 plugs, 150 screws and 1 tool. Covers about 100 lineal feet.

Color Match Epoxy Screws

2 3/4" Screws - 100 ct S104D-_

2 3/4" Screws - 350 ct S104D-_-350

2 3/4" Screws - 1750 ct S104D-_-1750

Smart Bit (depth setter) SWDE

Color Match Epoxy Fascia Screws

#10 x 1 7/8" - 100 ct

FS101D-_

Fascia Tool FST

Color Match 305 S/S Screws

2 1/2" S/S Screws* 350 ct S104-SS_

*Stocked in #55 Dark Slate, #63 Buckskin, #65 Rosy Brown and #71 Chocolate.

d exerdry s ystem 50' Roll 240' Roll

Compatible with all Deckorators and Azek/TimberTech decking

DD50-____ DD242-____ Specify specific series of decking

Blue Claw Installation Tool DD-BC

Special Order only for Fiberon decking.

gorilla decking by Homeland Vinyl Products

Research Report #ESL-1383

6" Deck Planks 16' 20' 24'

Full 6" coverage, 1 1/4" thick

Screw

Unique interlocking design channels water to the edges of deck creating a watershedding installation. Not waterproof. For proper warranty coverage, homeowners must complete a warranty registration form within 30 days of purchase.

Chestnut (CH)

Mocha Walnut (M)

*Chestnut is a solid color. Mocha Walnut is verigated color.

See gorilladeck.com for warranty form and installation instructions.

For 6" Gorilla Decking Only

Trims

1-1/2" SS Deck Screws 100 count/bag

1-1/4" SS Trim Screws Specify Color

C H S

1-1/8" 2-1/4"

All trims are 12'-6" long

koma PVc trims & Boards with Celuka Technology

3/4" Trim Boards (actual size)

All boards & sheets are wood grain on one side. Mouldings are smooth.

4 x 8 Sheets

Mouldings

Screws / Pro Plug System

Trim Screws Pro Plug Smooth Pro Plug Wood grain

Trim Boards

Brick Mold

sonoma

Sections include rails, aluminum stiffeners, pickets, brackets & screws. Posts, caps, & skirts are not included. Please order separately.

Picket spacing = 3 3/4"

Picket size = 7/8 x 1 1/2"

Additional brackets, see page 18 & 19 Add $ /ft (LIST) for 42" & 48" tall rail.

6' Sonoma Rail Section (13 pickets)

8' Sonoma Rail Section (18 pickets)

10' Sonoma Rail Section (22 pickets)

12' Sonoma Rail Section (27 pickets)

6' Sonoma STAIR Section (11 pickets)

8' Sonoma STAIR Section (14 pickets)

10' Sonoma STAIR Section (18 pickets)

10' and 12' level sections come standard with a center leg.

REPLACEMENT RAILS

Rails DO NOT include aluminum stiffeners. Sold Separately, see page 17

2" x 3 1/2" Top Rail

White Tan (A) Adobe (C)

Adjustable Bracket Option: To have your flat or stair rail sections packaged with adjustable brackets rather than the standard fixed brackets please add to the section cost:

All gates are CUSTOM made to fit your rough opening.

All gates include hardware

GATES ARE NOT RETURNABLE

For more about gates see page 66

ALZAR rail option is NOT AVAILABLE on Sonoma series.

Sections include rails, aluminum stiffeners, pickets, brackets & screws. Posts, caps, & skirts are not included. Please order separately.

Picket spacing = 3 3/8"

Picket size = 1 1/2" x 1 1/2"

Additional brackets, see page 18 & 19

Add $ /ft (LIST) for 42" & 48" tall rail.

and 12' level sections come standard with a center leg.

REPLACEMENT RAILS

Rails DO NOT include aluminum stiffeners. Sold Separately, see page 17

Adjustable Bracket Option:

To have your flat or stair rail sections packaged with adjustable brackets rather than the standard fixed brackets please add to the section cost:

Gates

Rough Opening

36" or Less 37" - 48" Standard Height

(colors 15% up)

All gates are CUSTOM made to fit your rough opening. All gates include hardware

GATES ARE NOT RETURNABLE

For more about gates see page 66

2" x 3 1/2" Top Rail

Top Rail

Sections include rails, aluminum stiffeners, spindles, brackets & screws. Posts, caps, & skirts are not included. Please order separately.

Spindle spacing = 3-3/8"

Spindle size = 1-1/2" x 1-1/2"

Additional brackets, see page 18 & 19

Add $ /ft (LIST) for 42" & 48" tall rail.

6' Victoria Rail Section (14 spindles)

8' Victoria Rail Section (19 spindles)

10' Victoria Rail Section (24 spindles)

12' Victoria Rail Section (29 spindles)

6' Victoria STAIR Section (11 spindles)

8' Victoria STAIR Section (15 spindles)

10' Victoria STAIR Section (19 spindles)

10' and 12' level sections come standard with a center leg.

REPLACEMENT RAILS

Rails DO NOT include aluminum stiffeners. Sold Separately, see page 17

Adjustable Bracket Option:

To have your flat or stair rail sections packaged with adjustable brackets rather than the standard fixed brackets please add to the section cost:

Standard Height Victoria Gate (colors 15% up)

-

All gates are CUSTOM made to fit your rough opening.

All gates include hardware

GATES ARE NOT RETURNABLE

For more about gates see page 66

2" x 3 1/2" Top Rail ALZAR Top Rail

Shown with ALZAR top rail option

contemPra

Vinyl Rail with Deckorators ROUND aluminum balusters

Sections include rails, aluminum stiffeners, balusters, brackets & screws. Posts, caps, & skirts are not included. Please order separately.

Baluster spacing = 3 7/8"

Baluster size = 3/4" round

Additional brackets, see page 18 & 19

Add $ /ft (LIST) for 42" tall rail. Available in Black, White, Bronze, Textured Black

Prices are for 36" tall rail.

Weathered Brown *Add $ per foot (list)

Please specify baluster color.

Bronze

10' and 12' level sections come standard with a center leg.

REPLACEMENT RAILS

Rails DO NOT include aluminum stiffeners. Sold Separately, see page 17

Adjustable Bracket Option: To have your flat or stair rail sections packaged with adjustable brackets rather than the standard fixed brackets please add to the section cost:

White (List)

Colors (List)

Gates

Standard Height

Contempra Gate (colors 10% up)

Rough Opening

36" or Less 37" - 48"

All gates are CUSTOM made to fit your rough opening. All gates include hardware

GATES ARE NOT RETURNABLE

For more about gates see page 66

contemPra 2

Vinyl Rail with Deckorators SQUARE aluminum balusters

Sections include rails, aluminum stiffeners, balusters, brackets & screws. Posts, caps, & skirts are not included. Please order separately.

Baluster spacing = 3 7/8"

Baluster size = 3/4" square

Additional brackets, see page 18 & 19

Prices are for 36" tall rail.

Textured Black *Add $ per foot (list)

Please specify baluster color.

Weathered Brown *Add $ per foot (list)

10' and 12' level sections come standard with a center leg.

REPLACEMENT RAILS

Rails DO NOT include aluminum stiffeners. Sold Separately, see page 17

Adjustable Bracket Option: To have your flat or stair rail sections packaged with adjustable brackets rather than the standard fixed brackets please add to the section cost:

White (List) Colors (List)

Gates

Standard Height Contempra 2 Gate (colors 10% up)

Rough Opening

36" or Less 37" - 48"

All gates are CUSTOM made to fit your rough opening.

All gates include hardware

GATES ARE NOT RETURNABLE

For more about gates see page 66

Black Bronze

V ista

Vista rail system comes with Alzar or 2 x 3 1/2" top rail option.

Each rail set includes top and bottom rails, aluminum stiffeners, brackets, hardware and foam glazing tape

GLASS PANELS ARE NOT INCLUDED

For 36" tall rail, obtain ¼" thick x 32" tall tempered glass or acrylic panels at your local glass dealer.

Additional brackets, see page 18 & 19

Panel width should be 3" less than finished distance between posts.

No Returns on Vista Sections.

REPLACEMENT RAILS

Rails DO NOT include aluminum stiffeners. Sold Separately, see page 17

Gates are not available for the Vista Rail System

B lank r ails & s ti FF eners

Blank Rails

stiffener is used in top and bottom 2"x3-1/2" rails. (Except for Sonoma rails)

Sonoma stiffeners are used in all Sonoma rails except for 10' & 12' top rails.

"L" stiffeners are used in the bottom 2" x 3-1/2" rails of 8' wide fence sections.

" I " stiffeners are used in the bottom 1-1/2" x 5-1/2" rails of 8' wide fence sections.

"H" stiffeners are used in all Alzar top rails.

"H"

2" x 3-1/2"

"L"

Extra

P lugged r ail B

All rail sections include mounting brackets and hardware. Use the guide to the left when ordering extra rail brackets.

Extra Hardware & Screws

2

s P ecialty r ail B rackets

Adjustable Bracket Kits - 4 Brackets Per Kit

Brackets adjust up & down or side to side to match your custom angles.

4

s econdary h andrail s ystem

1-1/2" Round Aluminum

Available in Textured Black, Matte Black, Textured White and Textured Bronze See page 21 for a typical installation detail

SKU All Colors

J* 8'-8" pc 1-1/2" Straight Rail KRR88R-S-_

Rail Connectors

M External Universal 90-180° KRRXC-_

E Straight Connector KRRSC-_

B End Cap KRREC-_

Corners

K* 90° Elbow KRRI90-_

H* 34° Elbow KRRI32-_

* 5° Elbow KRRI5-_

O* 90° Outside Corner KRRO90-_

Brackets

D Inline Bracket KRRIB-_

L Inside Corner Bracket KRRIC-_

Returns

C* "P" Loop Return KRRPR-_

P 90° Post Return KRR90R-_

T Straight Wall Return KRRSR-_

* These components need to be used with straight connectors.

s econdary h andrail s ystem

1-1/2" Round Aluminum

Typical Installation Detail

* These components need to be used with straight connectors.

Continuous Secondary Handrail

c om P onent c a B le r ail s ystem

Cable Railing components, used with wood or composite railing. It is recommended staying within 4' section lengths to maintain structural integrity. Order wire components separately. Each run of wire needs one Tensioner and one Swivel End. (Or two Tensioners) Max cable run is 48' if using Tensioners on each end. If using a Tensioner and a Swivel End the max run is 25'.

Cable 5/32" - 100' Roll

Cable 5/32" - 500' Roll

Tensioner - 2 pack

Tensioner - 10 pack

Swivel End - 2 pack

Swivel End - 10 pack

D Cable Sleeve - 10 pack

E Cable Cutter

F Drilling Template

Made from grade 316 stainless steel with a 1 x 19 strand construction.

The Tensioner is the primary cable railing tensioning/fastening device. The compression fitting allows for installation and tensioning with simple hand tools.

The Swivel End is used in conjunction with a Tensioner in order to tension cable. The slotted base allows for angles up to 45° and is surfaced mounted

The 1-½" Cable Sleeve is designed to protect your post from chafing and incidental damage from the cable rubbing around the outside of your mid post cable holes.

The Cable Cutter is an essential tool when installing a cable railing system. The hardened heat treated blades cut 5/32" cable cleanly and quickly for an easy installation.

The Drilling Template allows for an easy installation of the rail system. Cable runs are spaced 3" on-center.

c om P onent c a B le r ail s ystem

Sets include rail, (either 2 x 3-1/2" or Alzar) aluminum stiffener, 48" long center support, foot bracket, rail brackets & screws.

Order wire components separately. Each run of wire needs one Tensioner and one Swivel End. (Or two tensioners)

Max cable run is 48' if using Tensioners on each end. If using a Tensioner and a Swivel End the max run is 25'.

Posts, caps, & skirts are not included. Please order separately.

Vinyl Sets:

(Cable components sold separately)

**Brackets are included in all rail sets.**

(Each set includes two brackets and hardware)

A

B

C

Vinyl Sets include the following:

- Alzar top rail with aluminum stiffener

- (2) Brackets and Hardware

- (1)1-1/2" x 1-1/2" x 48" center support

(Holes will have to be drilled in center support on job site)

- (1) 1-1/2" Foot Bracket - to attach center support to deck.

Flat Bracket Sets: White Colors Alzar

Cable 5/32" - 100' Roll CBLC100

Cable 5/32" - 500' Roll CBLC500

Tensioner - 2 pack CBLT2

Tensioner - 10 pack

Swivel End - 2 pack

Swivel End- 10 pack

D Cable Sleeve - 10 pack

E Cable Cutter

F Drilling Template

CBLT10

CBLS2

CBLS10

CBLCS

CBLCC

CBLTP

STAIR Bracket Sets: White Colors

Alzar STAIR

Made from grade 316 stainless steel with a 1 x 19 strand construction.

The Tensioner is the primary cable railing tensioning/ fastening device. The compression fitting allows for installation and tensioning with simple hand tools.

The Swivel End is used in conjunction with a Tensioner in order to tension cable. The slotted base allows for angles up to 45° and is surfaced mounted

D E F

The Cable Sleeve is designed to protect your post from chafing and incidental damage from the cable rubbing around the outside of your mid post cable holes.

The Cable Cutter is an essential tool when installing a cable railing system. The hardened heat treated blades cut 5/32" cable cleanly and quickly for an easy installation.

The Drilling Template allows for an easy installation of the rail system. Cable runs are spaced 3" on-center.

V intage ( s P ecial o rder )

Use with 6" Posts

2 5/8" x 2 5/8" Balusters

4 1/2" x 3 3/8" Rails

Top and bottom rails are reinforced with aluminum stiffeners.

Baluster spacing= 5 1/4" on center spacing

Sections include rails, aluminum stiffeners, balusters and appropriate brackets.

Sections Flat Stair White

6' 6JR-S 6JSR-S

8' 8JR-S 8JSR-S 10' 10JR-S 10JSR-S

6" Accessories

For 6" mounts, see page 41

For 6" caps and skirts, see page 42-43

Brackets

o utlook ( 5/8" Square Baluster)

Sections include rails, balusters, mounting brackets & hardware.

Posts, caps, & skirts are not included. Order separately.

Baluster spacing = 3-3/4"

5/8" x 5/8" square pickets

Rail length for level sections

6' = 72", 8' = 96"

Rail length for STAIR sections

6' = 70", 8' = 94"

Stock Colors

Textured Black

Matte Black

Special Order Colors

Textured White

Textured Bronze

*Add 15% to stock color pricing for special order colors (Textured White or Textured Bronze). Extended lead times. T

Black Matte Black 5'

Replacement Rails

6' Rail Only specify type of rail and color (Outlook or Blank rail) 8' Rail Only specify type of rail and color (Outlook or Blank rail)

Gates

Standard Height Outlook Gate

Rough Opening 36" or Less 37" - 48"

All gates are CUSTOM made to fit your rough opening. Gates made with 2-1/2" post. All gates include hardware GATES ARE NOT RETURNABLE For more about gates see page 66

o utlook B rackets & a ccessories

Textured Black (TB)

Matte Black (MB)

A Flat Rail Bracket Kit (Set of 4)

B Fixed Stair Bracket Kit (Set of 4) 32°-36° angle

C 45° Fixed Angle Rail Bracket Kit (Set of 4)

Adjustable Stair Rail Bracket Kit

D

Swivels up and down (Set of 4) up to a 30° angle

E Adjustable Angle Rail Bracket Kit

Swivels side to side (Set of 4) up to a 40° angle

F Outlook Rail Support

ORB-_

OSRB-_

OARB-_

BUOSRB-_

BUOARB-_

ORS-_

a merican ( 3/4" Square Baluster)

Sections include rails, balusters, mounting brackets & hardware.

Posts, caps, & skirts are not included. Order separately.

Baluster spacing = 3-5/8" 3/4" x 3/4" square pickets

Rail length for level sections

6' = 72", 8' = 96"

Rail length for STAIR sections

6' = 70", 8' = 94"

8'

Gates

Rough Opening

36" or Less 37" - 48"

Replacement Rails

6' Rail Only specify type of rail and color (American or Blank rail)

8' Rail Only specify type of rail and color (American or Blank rail)

Standard Height

American Gate

All gates are CUSTOM made to fit your rough opening. Gates made with 2-1/2" post. All gates include hardware

GATES ARE NOT RETURNABLE

For more about gates see page 66

To mix rails and baluster colors, i.e., black rails and white balusters. Call for pricing. Alternative rail and baluster options available, please visit keylinkonline.com for details.

5' American Rail Section (13 balusters)

6' American Rail Section (16 balusters)

7' American Rail Section (19 balusters)

8' American Rail Section (21 balusters)

6' American STAIR Rail Section (12 balusters)

American STAIR Rail Section (17 balusters)

AAMA 2604 Powder Coating

Textured Black

Textured Bronze Textured White

a merican ( Vertical Cable Rail)

Sections include rails, ATTACHED cables, mounting brackets & hardware.

Posts, caps, & skirts are not included. Order separately.

Pre-drilled for cable spacing spacing = 2-7/8"

No job-site drilling required for typical installations.

Please visit keylinkonline.com for proper installation instructions.

6' American Vertical Cable Section

8' American Vertical Cable Section

T extured B lack

6' American STAIR Vertical Section TB6VASR-S

8' American STAIR Vertical Section TB8VASR-S

Gripping Pliers

Cable Cutter

Cable Tension Gauge

*Add 15% to Textured Black pricing for special order colors ( Textured White or Textured Bronze)

Uses the same posts, caps, skirts and brackets as the American aluminum baluster system.

View the chart above to determine the stainless steel support rods' positions, cut and remove unnecessary cables, then insert rods into empty holes.

All gates are CUSTOM made to fit your rough opening. Gates made with 2-1/2" post. All gates include hardware

GATES ARE NOT RETURNABLE

For more about gates see page 66

AAMA 2604 Powder Coating

Top rail 1-3/4" W x 1-7/8” H

Bottom rail 1-¼" W x 1-1/2” H

a merican B rackets & a ccessories

Brackets

A Flat Rail Bracket Kit (set of 4)

B Fixed Stair Bracket Kit (set of 4) 32°- 36° angle

C 45° Fixed Angle Rail Bracket Kit (set of 4)

D Adjustable Stair Rail Bracket Kit

Swivels up and down (set of 4) up to a 30° angle

E Adjustable Angle Rail Bracket Kit

Swivels side to side (set of 4) up to a 40° angle

Wedge for Horizontal Adjustable Brackets (2 pack)

Stair Wedge for Fixed Top Bracket (2 pack) 5°- 7° angle

Stair Wedge for Fixed Bottom Bracket (2 pack) 5°- 7° angle

Radius Adapter for Flat or Stair Fixed Bracket (set of 4)

F Universal Adjustable Bracket Kit

Swivels BOTH up and down and side to side (set of 4)

Drink Rail Bracket Kit (Fixed Flat or Stair) (2 pack)

Textured Black (TB)

Textured White (TW)

Textured Bronze (TBR)

ARB-_

ASRB-_

AARB-_

BUASRB-_

BUAARB-_

AWA-_

ASRTW-_

ASRBW-_

Special Order

BUUAARB-_

Special Order

G*

Drink Rail Bracket Kit (Fixed 45°) (2 pack)

Drink Rail Bracket Kit (Side to Side Adjustable) (2 pack)

Special Order

Special Order

* Additional deck board rail connectors can be used with the drink rail brackets. See page 57 for details.

Sections include rails, balusters, mounting brackets & hardware.

Posts, caps, & skirts are not included. Order separately.

Baluster spacing = 3-5/8" 3/4" x 3/4" square pickets

Rail length for level sections

6' = 72", 8' = 96"

Rail length for STAIR sections

6' = 70", 8' = 94"

Stock Color

Textured Black

Special Order Colors

Textured White

Textured Bronze

c hesa P eake ( Drink Rail Series)

Chesapeake Series is used only as a drink rail application. Refer to pages 3-5 for our deck options.

*Add 15% to Textured Black pricing for special order colors (Textured White or Textured Bronze). Extended lead times.

Tex Black

6' Chesapeake Rail Section __6CPR-S

8' Chesapeake Rail Section __8CPR-S

6' Chesapeake STAIR Rail Section __6CPSR-S

8' Chesapeake STAIR Rail Section __8CPSR-S

Level Bracket Kits (set of 4)

Stair Bracket Kits (set of 4)

450 Wedge - use with Level bracket (set of 4)

Angle Adjustable Side to Side Bracket (set of 4) up to a 36° angle

Gates

Must use at least 3-1/4" post, caps, and skirts with Chesapeake Series. Drink rail screws included.

CPRB-__

CPSRB-__

CPARB-__

BUCPARB-__

Rough Opening

37" - 48" Standard

36" or Less

Deck boards not included with Chesapeake gates. All gate deck boards installed on job site. All gates are CUSTOM made to fit your rough opening. Gates made with 3-1/4" post. All gates include hardware

GATES ARE NOT RETURNABLE

For more about gates see page 66

Alternative Chesapeake cable rail options available, please visit keylinkonline.com for details.

AAMA 2604 Powder Coating

450 Wedge

s econdary h andrail s ystem

1-1/2" Round Aluminum

Available in Textured Black, Matte Black, Textured White and Textured Bronze

See page 21 for a typical installation detail

Rail

J* 8'-8" pc 1-1/2" Straight Rail

Connectors

M External Universal 90-180°

E Straight Connector

B End Cap

Corners

K* 90° Elbow

H* 34° Elbow

* 5° Elbow

O* 90° Outside Corner

Brackets

D Inline Bracket

L Inside Corner Bracket

Returns

C* "P" Loop Return

P 90° Post Return

T Straight Wall Return

* These components need to be used with straight connectors.

n e W el P ost & c ladding

Textured Colors: Textured Black (TB), Textured White (TW), Textured Bronze (TBR)

2-1/2" x 38" Newel Post w/ base plate

2-1/2" x 48" Newel Post w/ base plate

3-1/4" x 38" Newel Post w/ base plate

3-1/4" x 48" Newel Post w/ base plate

4" x 38" Newel Post w/ base plate

4" x 48" Newel Post w/ base plate

Post Under Deck Bracket (installation diagram shown below)

3-1/4" x 108" Structural Porch Post (with mounting plates) - 5,000# load bearing

6" x 108" Aluminum 4-piece Cladding (wraps 5 1/2"x5 1/2" wood post)

6" x 144" Aluminum 4-piece Cladding (wraps 5 1/2"x5 1/2" wood post)

Textured Colors Matte Black

It is recommended to use 48" tall posts for intermediate and/or bottom post of stair sections

Newel Post

Welded plate includes 4 leveling bolts.

Dimensions of plate: 2-1/2" = 3 7/8" 3-¼" = 4 1/2" 4" = 5 1/2"

Post mounts with (4) 5/16" anchoring type bolts (not included).

Post Under Deck Bracket

Inside dimension of Post Clad = 5 1/2"

Outside dimension of Post Clad = 6"

Outside dimension of Skirt = 8 ¼"

Height of Post Clad Skirt = 1 1/2"

Used with blocking for wood framing installation.

Caps

P ost a ccessories

Textured Colors: Textured Black (TB), Textured White (TW), Textured Bronze (TBR)

Textured Colors

Skirts

Textured

Accessories

Textured Colors

Cross Over Adapters

*American Series Only

led l o W V oltage l ighting

Available in Textured Black, Textured White and Textured Bronze Matte Black is special order. Allow 4+ weeks lead time.

Lighted LED Post Cap Lights

2-1/2" Flat Post Cap Light (2.5 watt)

3-1/4" Flat Post Cap Light (2.5 watt)

4" Flat Post Cap Light (2.5 watt)

2-1/2" Pyramid Post Cap Light (2.5 watt)

3-1/4" Pyramid Post Cap Light (2.5 watt)

4" Pyramid Post Cap Light (2.5 watt)

Post Cap Lights (Unlit)

2-1/2" Flat Post Cap (unlit)

3-1/4" Flat Post Cap (unlit)

4" Flat Post Cap (unlit)

2-1/2" Pyramid Post Cap (unlit)

3-1/4" Pyramid Post Cap (unlit)

4" Pyramid Post Cap (unlit)

Lighted LED Post Cap Down Lights

2-1/2" Flat Post Cap Down Light (2.5 watt)

3-1/4" Flat Post Cap Down Light (2.5 watt)

4" Flat Post Cap Down Light (2.5 watt)

2-1/2" Pyramid Post Cap Down Light (2.5 watt)

3-1/4" Pyramid Post Cap Down Light (2.5 watt)

Order

Order

Order

4" Pyramid Post Cap Down Light (2.5 watt) Special Order

Lighting Accessories

Post & Stair Accent Light (1 watt)

Post Light Wire Kit

(2-way splitter, 5' & 9' wire extension)

2' Wire Extension

5' Wire Extension

9' Wire Extension

2-Way Wire Splitter

3-Way Wire Splitter

Power Supplies

(A) Key-Link 60 Watt w/ Control Hub KL60PS-__

(B) LMT 50 Watt Smart Power Supply LV50XF

(B) LMT 5' Lighting Harness

led solar Post caPs

Textured Black (TB)

Textured White (TW)

Textured Bronze (TBR)

2-1/2" Solar Cap LV25S-_

3-1/4" Solar Cap LV325S-_

Textured Colors

Fascia mount Brackets (sPecial order)

for Outlook, American and Chesapeake Rail Systems using a 3- ¼ " post.

Rail Support

Inside Corner Bracket Line/End Bracket

Outside Corner Bracket

a merican ( h orizontal c a B le r ail )

Cable Railing Kit Includes: (1) Top Rail; (2) Mounting Brackets with Hardware; (1)Center Baluster with baluster mounts & screws

Order all components separately

42" Height available, please call for price

Cable capable of spanning up to 100' runs

Post & Center Baluster Pre-drilled for 2.875" Cable Spacing

See movinyl.com for Installation Instructions.

36" tall has 11 runs of cable

42" tall has 13 runs of cable

Textured Black

Textured White

*Add 15% to Textured Black pricing for special order colors (Textured White or Textured Bronze). Extended lead times.

Textured Bronze

Textured Black (TB)

Please specify Color when ordering.

6' Level Rail with 1-Intermediate Pre-Drilled Baluster

8' Level Rail with 2-Intermediate Pre-Drilled Baluster

6' Stair Rail with 1-Intermediate Pre-Drilled Baluster

8' Stair Rail with 2-Intermediate Pre-Drilled Baluster

36" Tall

TBHCR6AR-S

TBHCR8AR-S

TBHCR6ASR-S

TBHCR8ASR-S

(Level and Stair Brackets are included in Rail Sets)

Level Mounting Brackets - (2 Top)

Stair Mounting Brackets - (2 Top)

Vertical Swivel Brackets - (2 Top)

Horizontal Swivel Brackets - (2 Top)

Top rail 1-3/4" W x 1-7/8” H

a merican ( h orizontal a ccessories )

Caps & Skirts

1-Piece Skirt

2-Piece Skirt

Flat Cap

Ball Cap

3-¼"

3-1/4" Post

Level Line Post - 38" (Pre-Drilled)

With plate and post upgrade kit installed

Level End Post - 38" (Pre-Drilled)

With plate, Cable Receiver and Tensioner Fittings

Level Corner Post - 38" (Pre-Drilled)

With plate & Corner Post Cable Channel Fittings

Level Line Post - 38" (Pre-Drilled)

With plate only (no post upgrade kit)

Stair End Post - 40" (Pre-Drilled)

*Put on tread With plate, Cable Receiver and Tensioner Fittings

Stair Line Post - 40" (Pre-Drilled)

*Put on tread With plate

Cable

Cable Tools

Rapid Rail Kits include everything between the posts

2 aluminum base rails, 2 cap rails, balusters, baluster support block and 4 brackets. ⅝" square balusters.

6' rails = 68-3/4" 8' rails = 92-3/4"

Available only in Textured Black (TB)

Post kits come with Cap, Skirt, Leveling Plate. Post has a 5" base plate.

2-1/2" x 2-1/2" x 39" Post Kit

2-1/2" x 2-1/2" x 49" Post Kit

Rapid Rail Post/Bracket Template

2-1/2" Post Cap

2-1/2" Post Skirt

4" Post Kits available by Special Order.

Rapid Rail Level Brackets (set of 4)

Rapid Rail Stair Brackets (set of 4)

Rapid Rail Horizontal Angle (set of 4)

Rapid Rail Post/Bracket Template

In-Line Bracket

Stair

Sections are PRE-ASSEMBLED and boxed with brackets Rectangle top and bottom profile. 3/4" square welded balusters. Stocked in Textured Black only. Other colors special order.

6' Level Kit contains 15 - 30" balusters 6' rails = 68 1/2"

8' Level Kit contains 20 - 30" balusters 8' rails = 92 1/2"

6' Stair Kit contains 14 - 35" balusters 6' stair = 72"

Post Kits come with Cap, Skirt, Leveling Plate. Post has a 5" base plate.

In-Line Rail Brackets (set of 4)

Stair Rail Brackets (set of 4)

Stair/Angle Swivel brackets are adjustable to work for stairs or horizontal angles. Need to order these brackets separately for horizontal angles.

alx contemPorary

horizontal caBle rail

Deckorators® cable railing is a great choice for a contemporary look that is both functional and stylish.

For ALX Contemporary Horizontal Cable Rail System, refer to pages 115 - 118 in our catalog. Special Order only.

P ost s lee V es & m ounts

Galvanized Post Mounts

-Used for mounting post to concrete.

-Mounts using (4) 3/8" x 3" wedge type anchor bolts (not included)

-Special blocking required when used on wood decks.

Wood Post Mounts

Designed to mount full length treated post. Use the one piece 4" New England Skirt or the one piece low-profile 6" skirt to cover mount.

both

View of 55GPB only Holes through

sides allow fence rails to slide through.

Adobe White Tan

Hollow Vinyl Extrusions designed to slip over wood post or our post mounts.

V inyl P ost c a P s

Standard

New England

8" Cap is similar to the New England cap shown.

Gothic

V inyl P ost s kirts

New England

1 Pc. Low Profile

2 Pc. Low Profile

4 Pc. Universal

Skirt is adjustable from

l oad B earing P orch P osts

SKU 1-9

A 4" x 9' Traditional SPP-44

A 5" x 9' Traditional 400 Series SPP-400

A 5" x 9' Traditional - TAN/CLAY SPP-T/A

B 5"x 10' Plain

B 5" x 10' Plain - TAN/CLAY SPP-PT/A

C 5" x 9' Madison (Colonial)

D 6" x 9' Recessed Panel

E 6" x 9' Vintage

F 8" x 10' Tapered Round

F 10" x 10' Tapered Round

Quantity Discounts

Total Posts (same series)

10 -19 5% off

20+ 10% off

The 400 Series structural post feature a continuous aluminum core along with stainless steel spacers.

All porch posts include mounting hardware. Trim skirts/sets are not included.

Traditional Plain Madison Recessed Vintage Tapered Round

n e W el P osts

Newel Post are White Only

• Newel posts do not include mounts, see page 41 for multi-mount post bases.

• Appropriate caps & skirts are available on page 42 & 43.

New England Post Covers

• Slips over your cedar or treated posts.

• "Telescopes" to any length up to 10'.

• Shipped complete with all shims and hardware.

Post shown with optional New England Skirts. Skirts NOT included.

1 54" 4x4 Turned Newel NP1

38" 6x6 Vintage Turned Newel Special Order

54" 6x6 Vintage Turned Newel Special Order 5466VNP

38" 6x6 Recessed Panel Newel 3866RDP

54" 6x6 Recessed Panel Newel 5466RDP

5 x 5 (for 4x4 wood post)

White 10NPC Tan & Adobe 10NPC-_

6 x 6 (for 5x5 wood post) White Only 10NPC-66

P ost W ra P s

Style H - 8 piece

10' Long Style H Wrap

To make a 4x6 post wrap, combine a 4x4 and 6x6 wrap. Style H only.

Universal Wrap Skirts for Style H & X

Post Wrap Caps for Style H & X

Style X - 4 piece

Post

Style S - 4 piece

Smooth Style S Wrap

Style F - 4 piece

Fluted Style F Wrap

s olar P ost c a P s

MaciMae Solar Cap

Post Size SKU White

4" LV44MMS

Zena Solar Cap

Post Size SKU White Matte Black

2-1/2" LV25ZS Non-Stock

3-1/2" LV35ZS Non-Stock

4" LV44HSZ Non-Stock

Aries Solar Cap

Post Size SKU White

4" LV44HSP

Polaris Solar Cap

Post Size SKU White Tan Clay

4" LV44HS

Neptune Solar Cap by LMT

Post Size SKU White Tan Clay

4" LV44NS

6" LV66NS

See pages 91-102 for non-stock and special order.

Allow 2+ week lead time on all special order lights.

Note about SOLAR caps: Solar caps give off a soft bluish light from their LED bulbs. They will burn up to 4-5 hours after a full charge on a summer day. Burn times are significantly shorter during the winter.

Saturn LED Series - Flat Top

4" and 5" Saturn lighted caps comes with 1 watt

Triton

All Triton, Titan and Sirius lighted caps are non-stock.

P ath Way & s tair l ighting

Nebula Eyeball Light

SKU White / Black / Bronze

LVNE-_

Lights have "warm" LED bulb that pulls 1 watt per light

Recessed Riser Light

SKU White / Black / Bronze

LVPR-_

Lights have "warm" LED bulb that pulls 6 watts per light

See pages 91-104 for non-stock and special order items.

t rans F ormers , W ire & P arts

Transformers

40 watt transformer w/timer LV40XF

100 watt transformer w/timer LV88XF

Wire

100' roll 12 gauge wire LV10012

Wire to Light Connectors

60" Connection Pig-Tail (one per light) LVH01

Bulbs (For Titan, Triton, & Sirius Lights)

Warm LED Bulb 1.6 watt LVBULB-W

Cool LED Bulb 1.6 watt LVBULB-C

Transformer buying guide: Take the number of lights and multiply by the wattage of the bulb. That will be the minimum wattage rating of the transformer.

Example:

12 Titan lights x 1.6 watt bulbs = 19.2 watts You would need the 40 watt transformer.

Pig Tails: You simply open the connector, lay your wire in the groove, then close the connector and a connection to the wire is made. Plug your light in and your done.

40 watt

100 watt

Titan Series Flat Top Aluminum Caps

(Non-Stock on all Titan Aluminum Caps)

Available in several post sizes and colors

Sirius Series Flat Top Aluminum Caps

(Non-Stock on all Sirius Aluminum Caps)

Available in several post sizes and colors

See pages 91-104 for non-stock and special order items.

Baluster Connectors

Black & White 20 connectors per bag

ABBC-B - Black per bag

ABBC-_ White per bag

Classic Aluminum Balusters - sold in 10 counts only

3/4" Round "Classic" Aluminum Balusters - Sold in 10 Counts only

Price Per Baluster

32" 36"

Black Contractor Packs - 100 count

Textured Black

or White

Weathered Brown

Textured Black White Bronze Weathered Brown Black

Must use flat connector with stair adapter

Baluster Stair Connectors

Black Only Contractor Pack 200 connectors per bag

ABBC-CP per bag

Baluster Installation Tool

Black, White, Bronze & Brown w/screws 20 connectors per bag

ABBSC-B - Black per bag

ABBSC-_ - White, Bronze & Brown per bag

Designer Baluster Connectors

Black & Bronze w/screws 20 connectors per bag

ABCD-_ per bag

Designer Baluster Stair Adapters

Black w/screws 20 connectors per bag

ABCDS-_ per bag

Speed installation by automatically spacing baluster connectors at a standard 4-5/8" (3-7/8" in between)

ABBT6

See pages 105-121 for non-stock and special order items.

Architectural Balusters

1" Wide SKU BOX / CASE QTY Per Baluster (Order in Qty of 5)

32-1/4" Arc

32-1/4" Baroque

Black AB32ARC-B 5 / 75

Bronze AB32ARC-BR 5 / 75

Arc

Mounting hardware included

Black AB32BAR-B 5 / 75

Bronze AB32BAR-BR 5 / 75

Black Contractor Packs AB32BAR-BCP 60

Baroque White Baroque Balusters available, special order only.

Estate Balusters

3/4" Square SKU BOX / CASE QTY Per Baluster (Order in Qty of 10)

(Black & Brown)

Black only (Sold in bags of 20)

Standard Estate Connectors

Must use flat connector with stair adapter

Black & Bronze (Sold in bags of 20)

Designer Estate Connectors

Flat ABEC-_ per bag

Stair ABESC-_ per bag

See pages 105-121 for non-stock and special order items.

Traditional Balusters

1/2" x 1" SKU BOX / CASE QTY Per Baluster (Order in Qty of 10)

32" Black AB32T-B 10 / 120

Bronze AB32T-BR 10 / 120

Each baluster comes with 4 matching stainless steel screws and 2 end caps.

Multi Degree Straight Stair

Railing Connectors

2 Connectors per pack

Easy installation of 2x4 wood rails Black only

Straight - Black ABRC-B

Multi Degree - Black ABRCM-B

Stair - Black ABRCS-B

Low Voltage Recessed Light Kits

1

2

3

Flush Mount Deck Light Kit (8 pieces) DRL-KIT

Riser Light Kit (8 pieces)

Flush Mount Deck Light Kit (2 pieces) DRL-KIT2

Riser Light Kit (2 pieces) DRSL-KIT2

12 Watt Transformer DRLT12

50 Watt Transformer DRLT50

The 8 piece kits include 8 Flush mount LED light fixtures, 7 splitters, 8 - 5' harnesses, 8 white trim rings, 8 black trim rings (lights and trim rings bagged, harnesses & splitters connected)

The 2 piece kits include 2 Riser LED light fixtures, 2 splitters, 2 - 5' harnesses, 2 white trim rings, 2 black trim rings (lights and trim rings bagged, harnesses & splitters connected). Each light = .4 watt/light.

See pages 105-121 for non-stock and special order items.

Decorative Stone Postcovers

Color SKU 42" 53"

Gray Cobblestone DPC-GC

Gray Fieldstone DPC-GF

Beige Stacked Stone DPC-B

Deckorators cast stone postcovers are made of fiberglass-reinforced concrete that is hand-painted. Designed to fit over a 4x4 or 6x6 treated post.

8" x 8" x 42" or 53"

Stone Postcover Caps

Gray Flat Stone

Woodland Gray

Woodland Gray - Solar

2-Piece Decorative Stone Postcovers

Color SKU 42" only

Gray Cobblestone DPC-GC-2P

Beige Stacked Stone DPC-B-2P

2-piece Cap (4" or 6") DPCC2-_

Deckorators postcovers are made of fiberglassreinforced concrete that is hand-painted.

Outside dimension of 2-piece Cap is 10 ¼"

See pages 105-121 for non-stock and special order items.

Gray Cobblestone

Gray Fieldstone

Gray Flat Stone

Copper Cast Stone

Beige Stacked Stone

Woodland Gray Woodland Gray Solar

Victoria High Point Caps

Post Size SKU Black Copper

4 x 4 (Nominal) W44VHP-_

6 x 6 (Nominal) W66VHP-_

Post Base Trims

Post Size Wood type SKU Price

4 x 4 (Nominal) Pressure Treated or Cedar W44SKRT-_

6 x 6 (Nominal) Cedar W66SKRT-C

Newport High Pyramid Wood Caps

Post Size Wood type SKU Price

4 x 4 (Nominal)

6 x 6 (Nominal)

Pressure Treated or Cedar W44NHP-_

Pressure Treated or Cedar W66NHP-_

With wood caps and trims, it is recommended to coat them inside and out with a high-quality exterior finish to preserve the wood

Deck Board Rail Connector (6 pk) DBRC | Stainless Only

Drink Rail Bracket can be used with vinyl or aluminum rail

See pages 105-121 for non-stock and special order items.

Stringer Bracket

Purlin Beam

"H" Stiffener

2x6 Rafter

2x6 Drop in Brackets

2x6 Rafter Beam

'C' Aluminum Stiffener can be used in Beams or in rafters (when you are attaching purlins to top of rafters)

P ergola r oo F s ystem

Vinyl Extrusions:

Rafters

Purlins

Please

Beams

Stiffeners

Pergola Accessories

2x6 Drop in

All brackets (drop in and stringer brackets include screws)

Stringer Bracket

All construction details shown are suggestions only. Builder is solely responsible for determining best methods based on individual project and site conditions.

No Returns on Pergola Components

B C D

2 x 6 hollow. Aluminum 'H' stiffeners are recommended. Holes for purlins routed for on side only. Same part make right or left.

2 x 6 hollow. Aluminum 'H' stiffeners are recommended. Holes for purlins routed through both sides.

1-1/2" x 1-1/2" or 7/8" x 6" hollow. No Stiffener. Runs continuous from end rafter to end rafter.

2 x 6 or 2 x 8 hollow. Uses nominal wood 2x's or 2x6 'C' alum. as stiffener. Bolts to existing posts. Bolts & wood by others.

Under normal applications, no more than 8' post spacing is recommended.

Wood 2x's insert, not included. Could also use 'C' Stiffener.

2x6 or 2x8

Vinyl Beam

AA. End Rafter

B. Mid Rafter

C. Purlin

D. Beam

Typical cross section purlin spacing.

P ergola r oo F s ystem

Pergola Post Mount Kit

PPM

Fasten bottom mount to concrete substructure using at least 3/8" x 3" wedge type anchors (not provided). Measure, cut and insert the 3-¼" aluminum extrusion into the bottom mount and fasten at all connection points (use ¼" x 4" bolts). Make sure all is square and plumb. May have to shim under mount for unlevel surfaces. Slide the top mount over the 3-¼" aluminum extrusion to the built in stop and make sure plumb with the bottom mount. Fasten top mount (use ¼" x 4" bolts)

After checking square & plumb on mount, slide column over mount. Install all appropriate skirts and trims on column. Slide cellular PVC board over top mount to where it rests on top of column. You can trim down overall dimensions for a proportioned look. Install 4" vinyl sleeve and cap.

Fasten spacer collars (round columns only) to aluminum post according to instructions. Make sure post & collars are stable. May need to modify spacers for 6" columns.

Install the 2x6 vinyl beam stock (with wood 2x6 inside) to the top mount. Either bolt through all pieces (using ¼" x 7 bolts) for superior stability or fasten each beam separately. Plug the bolt holes with hole plugs. Make sure bolts do not extend through where hole plugs will not work.

B lank r ail & s ti FF eners

Blank Rails

x 3-1/2"

"H" stiffener is used in top and bottom 2"x3-1/2" rails. (Except for Sonoma rails)

Sonoma stiffeners are used in all Sonoma rails except for 10' & 12' top rails.

" I " stiffeners are used in the bottom 1-1/2" x 5-1/2" rails of 8' wide fence sections.

x 5

5 H "H" stiffeners are used in all Alzar top rails.

g arden & P atio a ccessories

Vinyl Mail Box Posts

Planter Boxes

Small Planter Box

(Inside dimensions 13 3/4" x 13 3/4") PBS

Large Planter Box

(Inside dimensions 16 3/4" x 16 3/4") PBL

*Planter Boxes are designed to accommodate flower pots or baskets. From floor of box to top of rail for the small box measures 12-1/2" and the large is 15-1/2"

Lattice White Tan Adobe

4 x 8 Lattice - 2-3/4" Diagonal

8' - 'C' Channel for Lattice

g arden & P atio a ccessories

Kingsport Pergola

• 53" Wide x 35" Deep x 96" High

(Outside Measurements)

• Posts - 4" x 4" x 102"

• Secure to anchored wood posts (not included)

AKP1

Kingsport Arbor

• 57" Wide x 35" Deep x 96" High

(Outside Measurements)

• Posts - 4" x 4" x 96"

• Secure to anchored wood posts (not included)

Kingsport Trellis

• 47-3/4" Wide x 74" High

(Outside Measurements)

• Posts - 4" x 4"

• 12" for burial or secure to anchored wood posts (not included)

Countryside Corner Accent

• 54" wide on each side w/ 4x4 posts

• 46-7/8" @ tallest picket

•

g ate h ard Ware & a ccessories

All vinyl gates are custom made to fit your opening. GATES ARE NOT RETURNABLE. When ordering please give the width inside your finished opening. We will size the gate to allow for the hardware.

• All standard handrail gates include S/S Self Closing Hinge Set (#2) and a Nylon Keyed Latch (#7)

• All gates are reinforced with wood fillers on the hinge side. (Except Alzar top rail)

• All standard fence gates include S/S Hinge Set (#3) and a S/S Latch (#4)

• All double gates come with respective hinges, latch and standard drop rod.

Gate Hardware and Components (Available in Black or White, please specify)

1 Nylon Adjustable Self Closing Hinge Set (Both directions) GH10

2 S/S Adjustable Self Closing Hinge Set GH11

*Optional - Add $ (LIST)

*Optional - Add $ (LIST)

3 S/S Adjustable Hinge Set GH12

Not Shown Nylon 4" Self-closing Hinge Set (For Keystone Gates) GH13

Not Shown Nylon Self-closing 1-1/2" Fully Adjustable Hinge Set GH14

4 S/S Latch Set GH20

5 24" Standard Drop Rod GH40

Not Shown 36" Standard Drop Rod GH41

Not Shown 24" Lockable Drop Rod GH42

Not Shown 24" Drop Rod - For Alum. Fence GH43

6 Magnetic Gate Pool Latch GH23

7 Nylon One-Sided Keyed Latch GH21

8 Nylon Two-Sided Keyed Latch GH24

9 Nylon Gate Handle GH30

10 4" Gate Wheel GH50 11

Gate Pocket GP15

c lassic

• 48", 54", 60", 72" heights

• 48" tall is offered in 2-rail or 3 rail option

• 6' wide assembled sections only

• 1" x 1" rails with 5/8" square pickets

• 3-13/16" space between pickets

• Offered with flush or traditional bottom rail. Traditional style has 5" exposed picket below the bottom rail.

• 4-rail option (72" tall) Add $ (LIST)

• 6' wide = 72-1/2" on center

• Allow 3+ full weeks for delivery

• Call for White & Bronze pricing

2" caps sold separately, see page 71

2 x 2 - 96" Post (Line, End, Corner)

2 x 2 - 96" Gate Post (End) .125 wall

All gates are PRE-ASSEMBLED to specific size. All gates include black hardware *Specify Flush or Traditional Bottom Rail

48" tall Classic 2-rail Gate - (Flush Bottom only)

48" tall Classic 3-rail Gate

54" tall Classic 3-rail Gate

60" tall Classic 3-rail Gate

72" tall Classic 3-rail Gate

or T)

E, C)-(F or T)

or T)

Gate panels are

Double gates priced as two singles. Double R/O for post placement (2-48" = 96" R/O).

All gates are welded for superior strength & durability.

Arched top gates available by special order only, please call. Magna latch adder $ (LIST).

ALL MATERIAL IS NON RETURNABLE. Allow 4+ weeks lead time on gates.

W ilmington

• 48", 54", 60", 72" heights

• 6' wide assembled sections only

• 1" x 1" rails with 5/8" square pickets

• 3-13/16" space between pickets

• Offered with flush or traditional bottom rail. Traditional style has 5" exposed picket below the bottom rail.

• 4-rail option (72" tall) Add $ (LIST)

• 6' wide = 72-1/2" on center

• Allow 3+ full weeks for delivery

• Call for White & Bronze pricing

2" caps sold separately, see page 71

Black SKU

48" tall Wilmington Section (3-RAIL) 48WL-(F or T)

2 x 2 - 72" Post (Line, End, Corner) 48WL(L, E, C)-(F or T)

2 x 2 - 72" Gate Post (End) .125 wall 48WLGP-(F or T)

54" tall Wilmington Section (3-RAIL) 54WL-(F or T)

2 x 2 - 84" Post (Line, End, Corner) 54WL(L, E, C)-(F or T)

2 x 2 - 84" Gate Post (End) .125 wall 54WLGP-(F or T)

60" tall Wilmington Section (3-RAIL) 60WL-(F or T)

2 x 2 - 84" Post (Line, End, Corner) 60WL(L, E, C)-(F or T)

2 x 2 - 84" Gate Post (End) .125 wall 60WLGP- (F or T) 72" tall Wilmington Section (3-RAIL) 72WL-(F or T)

2 x 2 - 96" Post (Line, End, Corner) 72WL-(L, E, C)-(F or T)

2 x 2 - 96" Gate Post (End) .125 wall 72WLGP-(F or T)

All gates are PRE-ASSEMBLED to specific size. All gates include black hardware.

*Specify Flush or Traditional Bottom Rail

tall Wilmington 3-rail Gate

GATES

Gate panels are 1 1/2" less than R/O

Double gates priced as two singles. Double R/O for post placement (2-48" = 96" R/O).

All gates are welded for superior strength & durability.

Arched top gates available by special order only, please call.

ALL MATERIAL IS NON RETURNABLE. Allow 4+ weeks lead time on gates.

Magna latch adder $ (LIST).

B lue r idge

• 48", 54", 60", 72" heights

• 6' wide assembled sections only

• 1" x 1" rails with 5/8" square pickets

• 3-13/16" space between pickets

• Offered with flush or traditional bottom rail. Traditional style has 5" exposed picket below the bottom rail.

• 4-rail option (72" tall) Add $ (LIST)

• 6' wide = 72-1/2" on center

• Allow 3+ full weeks for delivery

• Call for White & Bronze pricing

2" caps sold separately, see page 71

48" tall Blue Ridge Section (3-RAIL) 48BR-(F or T)

2 x 2 - 72" Post (Line, End, Corner) 48BR(L, E, C)-(F or T)

2 x 2 - 72" Gate Post (End) .125 wall 48BRGP-(F or T)

54" tall Blue Ridge Section (3-RAIL) 54BR-(F or T)

2 x 2 - 84" Post (Line, End, Corner) 54BR(L, E, C)-(F or T)

2 x 2 - 84" Gate Post (End) .125 wall 54BRGP-(F or T)

60" tall Blue Ridge Section (3-RAIL) 60BR-(F or T)

2 x 2 - 84" Post (Line, End, Corner) 60BR(L, E, C)-(F or T)

2 x 2 - 84" Gate Post (End) .125 wall 60BRGP- (F or T)

72" tall Blue Ridge Section (3-RAIL) 72BR-(F or T)

2 x 2 - 96" Post (Line, End, Corner) 72BR-(L, E, C)-(F or T)

2 x 2 - 96" Gate Post (End) .125 wall 72BRGP-(F or T)

All gates are PRE-ASSEMBLED to specific size. All gates include black hardware.

*Specify Flush or Traditional Bottom Rail

48" tall Blue Ridge 3-rail Gate

54" tall Blue Ridge 3-rail Gate

60" tall Blue Ridge 3-rail Gate

72" tall Blue Ridge 3-rail Gate

GATES

Gate panels are

R/O

Double gates priced as two singles. Double R/O for post placement (2-48" = 96" R/O).

All gates are welded for superior strength & durability.

Arched top gates available by special order only, please call.

ALL MATERIAL IS NON RETURNABLE. Allow 4+ weeks lead time on gates.

Magna latch adder $ (LIST).

c hicago

• 48", 54", 60", 72" heights

• 6' wide assembled sections only

• 1" x 1" rails with 5/8" square pickets

• 3-13/16" space between pickets

• Offered with flush or traditional bottom rail. Traditional style has 5" exposed picket below the bottom rail.

• 4-rail option (72" tall) Add $ (LIST)

• 6' wide = 72-1/2" on center

• Allow 3+ full weeks for delivery

• Call for White & Bronze pricing

2" caps sold separately, see page 71

SKU

48" tall Chicago Section (3-RAIL) 48CH-(F or T)

2 x 2 - 72" Post (Line, End, Corner) 48CH(L, E, C)-(F or T)

2 x 2 - 72" Gate Post (End) .125 wall 48CHGP-(F or T)

54" tall Chicago Section (3-RAIL) 54CH-(F or T)

2 x 2 - 84" Post (Line, End, Corner) 54CH(L, E, C)-(F or T)

2 x 2 - 84" Gate Post (End) .125 wall 54CHGP-(F or T)

60" tall Chicago Section (3-RAIL) 60CH-(F or T)

2 x 2 - 84" Post (Line, End, Corner) 60CH(L, E, C)-(F or T)

2 x 2 - 84" Gate Post (End) .125 wall 60CHGP- (F or T)

72" tall Chicago Section (3-RAIL) 72CH-(F or T)

2 x 2 - 96" Post (Line, End, Corner) 72CH-(L, E, C)-(F or T)

2 x 2 - 96" Gate Post (End) .125 wall 72CHGP-(F or T)

All gates are PRE-ASSEMBLED to specific size. All gates include black hardware. *Specify Flush or Traditional Bottom Rail

48" tall Chicago 3-rail Gate

54" tall Chicago 3-rail Gate 60" tall Chicago 3-rail Gate

72" tall Chicago 3-rail Gate

GATES

Gate panels are 1 1/2" less than R/O 48" wide R/O 60" wide R/O

Double gates priced as two singles. Double R/O for post placement (2-48" = 96" R/O).

All gates are welded for superior strength & durability.

Arched top gates available by special order only, please call.

Magna latch adder $ (LIST).

ALL MATERIAL IS NON RETURNABLE. Allow 4+ weeks lead time on gates.

Caps

a luminum F ence a ccessories

Brackets

Skirts

Post Base

Gate Hardware

1 Standard Cap

2 Dome (ball) Cap

4 Flat Rail Bracket AFRB

5 Universal Swivel Bracket AFSBB

6 Trim Skirt Used with Concrete Post Mount AF22SSKRT

7 24" tall Concrete Post Mount Mounts with (4) 3/8" x 3 wedge type anchors (not included) AFAPB

8 Aluminum Gate Hardware (Hardware is included w/gates) GH44

Shown Magna Pool Latch GH23

Shown 24" Drop Rod GH43

*Pre drill holes for gate hardware in all gate posts.

Bracket swivels both up and down and side to side.

c ascade 1

No Returns on Fencing

• 36", 42", 48" & 60" heights

• 2" x 3 1/2 " top and bottom rails

• 6' wide section includes:

11 - 7/8" x 3" pickets & caps

• 8 ' wide sections includes: 15 - 7/8" x 3" pickets & caps

• 3" space between pickets

• Both 6' & 8' wide sections have aluminum L stiffener in bottom rail

• Replacement parts available, please call office for price

• 6' wide = 72" on center

• 8' wide = 96" on center

• 4" caps sold separately, see pg 42

Quantity Discounts

Total Sections or Posts 11-25 5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

All gates are CUSTOM made to fit your rough opeing. All Gates include hardware.

lank) when ordering

GATES

ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted.

All gates are made with a permanent diagonal brace. Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

Available with pointed or dog-ear picket caps.

c ascade 2

No Returns on Fencing

• 42", 48" & 60" heights

• 2" x 3 1/2 " top and bottom rails

• 6' wide section includes: 11 - 7/8" x 3" pickets & caps

• 8 ' wide sections includes: 15 - 7/8" x 3" pickets & caps

• 3" space between pickets

• Both 6' & 8' wide sections have aluminum L stiffener in bottom rail

• Height based on tallest picket

• 7" difference between tallest and shortest pickets

• Replacement parts available, please call office for price

• 6' wide = 72" on center

• 8' wide = 96" on center

• 4" caps sold separately, see pg 42

Tan 25% up charge

Tan 15% up charge

Adobe 25% up charge

Adobe 25% up charge

6' wide 8’ wide SKU 1 - 10 1 - 10

tall Cascade 2 Section 42CS2-(6’ or 8')

x 4 Post (72" tall) 42CS2-_

tall Cascade 2 Section 48CS2-(6' or 8')

x 4 Post (72" tall) 48CS2-_

tall Cascade 2 Section 60CS2-(6' or 8') 4 x 4 Post (90" tall) 60CS2-_

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

Quantity Discounts

Total Sections or Posts

11-25 5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

GATES

Rough Opening Size 36" or Less 37" - 48" 49" - 60" 42" tall Cascade 2 Gate 48" tall Cascade 2 Gate 60" tall Cascade 2 Gate

GATES ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted.

All gates are made with a permanent diagonal brace.

Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

Available with pointed or dog-ear picket caps.

c ascade 3

No Returns on Fencing

• 42", 48" & 60" heights

• 2" x 31/2" top and bottom rails

• 6' wide section includes: 11 - 7/8" x 3" pickets & caps

• 8' wide sections includes: 15 - 7/8" x 3" pickets & caps

• 3" space between pickets

• Both 6' & 8' wide sections have aluminum L stiffener in bottom rail

• Height based on shortest picket

• 6" difference between tallest and shortest pickets

• Replacement parts available, please call office for price

• 6' wide = 72" on center

• 8' wide = 96" on center

• 4" caps sold separately, see pg 42

Quantity Discounts

Total Sections or Posts

11-25 5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

GATES

GATES ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted.

All gates are made with a permanent diagonal brace.

Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

Available with pointed or dog-ear picket caps.

c ascade 4

No Returns on Fencing

• 36", 48" & 60" heights

• 2" x 31/2" top and bottom rails

• 2" x 31/2" mid rail on 60" tall

• 6' wide section includes: 11 - 7/8" x 3" pickets

• 8' wide sections includes: 15 - 7/8" x 3" pickets

• 3" space between pickets

• Both 6' & 8' wide sections have aluminum L stiffener in bottom rail

• Replacement parts available, please call office for price

• 6' wide =72" on center

• 8' wide = 96" on center

• 4" caps sold separately, see pg 42

Tan 25% up charge Adobe 25% up charge

4 x 4 Post (72" tall) 48CS4-_

4 x 4 Post (84" tall) Pool Code Post

Specify when ordering pool code style fence. Post route; top of top rail to bottom of bottom rail is 48 1/2" tall.

tall Cascade 4 Section 60CS4- (6 ' or 8 ' )

4 x 4 Post (90" tall) 60CS4-_

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

GATES

GATES ARE NOT RETURNABLE For more about gates see page 66

Quantity Discounts

Total Sections or Posts 11-25 5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted.

All gates are made with a permanent diagonal brace. Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

s hasta 1

No Returns on Fencing

• 36", 42", 48" & 60" heights.

• 2" x 31/2" top and bottom rails

• 6' wide section includes: 19 - 7/8" x 11/2" pickets & caps

• 8' wide sections includes: 26 - 7/8" x 11/2" pickets & caps

• 2" space between pickets

• Both 6' & 8' wide sections have aluminum L stiffener in bottom rail

• Replacement parts available, please call office for price

• 6' wide = 72" on center

• 8' wide = 96" on center

• 4" caps sold separately, see pg 42

Tan 25% up charge

Adobe 25% up charge

36" tall Shasta 1 Section 36SH1- (6 ’ or 8')

4 x 4 Post (60" tall) 36SH1-_

42" tall Shasta 1 Section 42SH1-(6' or 8')

4 x 4 Post (72" tall) 42SH1-_

48" tall Shasta 1 Section 48SH1-(6' or 8')

4 x 4 Post (72" tall) 48SH1-_

60" tall Shasta 1 Section 60SH1-(6' or 8')

4 x 4 Post (90" tall) 60SH1-_

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

tall Shasta 1 Gate 42" tall Shasta 1 Gate 48" tall Shasta 1 Gate

60" tall Shasta 1 Gate

GATES ARE NOT RETURNABLE

GATES

For more about gates see page 66

Quantity Discounts

Total Sections or Posts 11-25 5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted.

All gates are made with a permanent diagonal brace. Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

s hasta 2

No Returns on Fencing

• 42", 48" & 60" heights.

• 2" x 31/2" top and bottom rails

• 6' wide section includes: 19 - 7/8" x 11/2" pickets & caps

• 8' wide sections includes: 26 - 7/8" x 11/2" pickets & caps

• 2" space between pickets

• Both 6' & 8' wide sections have aluminum L stiffener in bottom rail

• Height based on tallest picket

• 8" difference between tallest and shortest pickets.

• Replacement parts available, please call office for price

• 6' wide = 72" on center

• 8' wide = 96" on center

• 4" caps sold separately, see pg 42

Tan 25% up charge

Adobe 25% up charge

48" tall Shasta 2 Section 48SH2-(6' or 8')

4 x 4 Post (72" tall) 48SH2-

60" tall Shasta 2 Section 60SH2-(6' or 8')

4 x 4 Post (90" tall) 60SH2-_

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

Quantity Discounts

Total Sections or Posts 11-25 5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

42" tall Shasta 2 Gate

48" tall Shasta 2 Gate

60" tall Shasta 2 Gate

GATES

Rough Opening Size 36" or Less 37" - 48" 49" - 60"

GATES ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted. All gates are made with a permanent diagonal brace.

Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

l ogan

No Returns on Fencing

• 36", 48" & 60" heights.

• 2" x 31/2" top and bottom rails

• 2" x 31/2" mid rail on 60" tall

• 6' wide section includes: 12 - 7/8" x 11/2" pickets

• 8' wide sections includes: 17 - 7/8" x 11/2" pickets

• 37/8" space between pickets

• Both 6' & 8' wide sections have aluminum L stiffener in bottom rail

• Replacement parts available, please call office for price

• 6' wide =72" on center

• 8' wide = 96" on center

• 4" caps sold separately, see pg 42

Tan 25% up charge.

Adobe 25% up charge

36" tall Logan Section 36LOG-(6’ or 8')

4 x 4 Post (60" tall) 36LOG-_

48" tall Logan Section 48LOG-(6' or 8')

4 x 4 Post (72" tall) 48LOG-_

60" tall Logan Section 60LOG-(6' or 8')

4 x 4 Post (90 tall") 60LOG-_

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

Quantity Discounts

Total Sections or Posts

11-25 5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

36" tall Logan Gate

48" tall Logan Gate

60" tall Logan Gate

GATES

Rough Opening Size 36" or Less 37" -

GATES ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request.

For double gates, price as two singles. Hardware adjusted. All gates are made with a permanent diagonal brace.

Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

r ainier

No Returns on Fencing

• 48", 60" & 72" heights

• 2" x 3 1/2 " top rail

• 1 1/2 " x 5 1/2 " bottom rail

• 2" x 3 1/2 " mid rail on 60" & 72" tall

• 6' wide section includes:

7 - 7/8" x 1 1/2 " pickets 8 - 7/8" x 3" pickets

• 8' wide sections includes: 10 - 7/8" x 1 1/2 " pickets 11 - 7/8" x 3" pickets

• 2" space between pickets

• 8' wide sections has aluminum

I stiffener in bottom rail

• Replacement parts available, please call office for price.

• 6' wide = 72" on center

• 8' wide = 96" on center

• 5" caps sold separately, see pg 42

Tan 25% up charge

5 x 5 Post (102" tall)

Adobe 25% up charge All gates are CUSTOM made to fit your rough opening.

Quantity Discounts

Total Sections or Posts

5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

GATES

GATES ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted. All gates are made with a permanent diagonal brace. Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

W hitney

No Returns on Fencing

• 48", 60" & 72" heights

• 2" x 3 1/2 " top rail

• 1 1/2 " x 5 1/2 " bottom rail

• 2" x 3 1/2 " mid rail on 60" & 72" tall

• 6' wide section includes: 18 - 7/8" x 3" pickets

• 8' wide sections includes: 24 - 7/8" x 3" pickets

• 5/8" space between pickets

• 8' wide sections has aluminum I stiffener in bottom rail

• Replacement parts available, please call office for price

• 6' wide = 72" on center

• 8' wide = 94" on center

• 5" caps sold separately, see pg 42

Tan 25% up charge. Adobe 25% up charge

or 8')

Quantity Discounts

Total Sections or Posts

5% off

10% off Sections and posts cannot be combined for quantity discounts.

x 5 Post (102" tall)

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

GATES

Rough Opening Size

GATES ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted.

All gates are made with a permanent diagonal brace.

Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

W hitney 2

No Returns on Fencing

• 48", 60" & 72" heights

• 2" x 3 1/2 " top rail

• 1 1/2 " x 5 1/2 " bottom rail

• 2" x 3 1/2 " mid rail on 60 " & 72 " tall

• 6' wide section includes: 10 - 7/8" x 6" pickets

• 8' wide sections includes: 13 - 7/8" x 6" pickets

• 3/4 " space between pickets

• 8' wide sections has aluminum

I stiffener in bottom rail

• Replacement parts available, please call office for price.

• 6' wide = 73-1/2" on center

• 8' wide = 94" on center

• 5" caps sold separately, see pg 42

Tan 25% up charge. Adobe 25% up charge Quantity Discounts Total Sections or Posts

5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

tall Whitney 2 Gate

tall Whitney 2 Gate

GATES

Rough Opening Size

GATES ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted. All gates are made with a permanent diagonal brace. Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

e V erest

No Returns on Fencing

• 48", 60" & 72" heights

• 1 1/2 " x 5 1/2 " top & bottom rail

• 6' wide section includes: 11 - 7/8" x 6" T&G picket panels

• 8' wide sections includes: 15 - 7/8" x 6" T&G picket panels

• 2 - 1" x 1 1/2 " C-channels to cover panel edges

• 8' wide sections has aluminum I stiffener in bottom rail

• Replacement parts available, please call office for price

• 6' wide = 72" on center

• 8' wide = 96" on center

• 5" caps sold separately, see pg 42

Tan 25% up charge. Adobe 25% up charge

(6 ' or 8 ' )

(6 ' or 8 ' )

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

Quantity Discounts

Total Sections or Posts

5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

GATES

GATES ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted. All gates are made with a permanent diagonal brace.

Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

• 72" height only

• 1 3/4 " x 5 1/2 " top, mid & bottom rail

• 6' wide section includes: 22 - 6" T&G picket panels

• 8 ' wide sections includes: 30 - 6" T&G picket panels

• 4 - 1" x 1 1/2 " C-channels to cover panel edges

• All sections have metal stiffeners in all 3 rails

• Replacement parts available, please call office for price

• 6' wide = 72" on center

• 8' wide = 96" on center

e V erest h ome W ood

No Returns on Fencing

All Sections come with a mid rail for added support

72" tall Everest Section 72EVR-(6' or 8')-MW

5 x 5 Post (102") 72EVR-__-MW

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

5 x 5 Standard Caps: (sold separately )

Quantity Discounts

Total Sections or Posts 11-25 5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

55SCAP-MW 1-3/4" x 5-1/2" Drop in Brackets

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

72" tall Everest Gate - MW

Mocha

GATES

Rough Opening Size 36" or Less 37" - 48" 49" - 60"

GATES ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted. All gates are made with a permanent diagonal brace. Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

Mocha Walnut color full privacy fencing.

Walnut

Mocha Walnut 175DRP-MW

c am B ridge

No Returns on Fencing

• 48", 60" & 72" heights

• 2" x 31/2" top rail

• 11/2" x 51/2" bottom & mid rail

• 6' wide section includes:

16 - 7/8" x 11/2" pickets

11 - 6" T&G panels

• 8' wide sections includes:

22 - 7/8" x 11/2" T&G picket

15 - 6" T&G panels

• 2 - 1" x 11/2" C-channels to cover panel edges

• 8' wide sections has aluminum I stiffener in bottom rail

• Replacement parts available, please call office for price

• 6' wide = 72" on center

• 8' wide = 96" on center

• 5" caps sold separately, see pg 42

Tan 25% up charge. Adobe 25% up charge

6' wide 8’ wide SKU 1 - 10 1 - 10

tall Cambridge Section 48CMB-(6’ or 8')

5 x 5 Post (72" tall) 48CMB-_ 60" tall Cambridge Section 60CMB-(6' or 8') 5 x 5 Post (90" tall)

tall Cambridge Section

5 x 5 Post (102" tall)

or 8')

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

Quantity Discounts

Total Sections or Posts 11-25 5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

GATES

Rough Opening Size 36" or Less 37" - 48" 49" - 60" 48" tall Cambridge Gate

60" tall Cambridge Gate 72" tall Cambridge Gate

GATES ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request.

For double gates, price as two singles. Hardware adjusted. All gates are made with a permanent diagonal brace.

Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

• 48", 60" & 72" heights

• 2" x 3 1/2 " top rail

• 1 1/2 " x 5 1/2 " bottom & mid rail

• 6' wide section includes:

11 - 6" T&G picket panels

• 8' wide sections includes:

15 - 6" T&G picket panels

• 81/2" lattice on 48" & 60" tall sections

• 12" lattice on 72" tall sections

• 2 - 1" x 1 1/2 " C-channels to cover panel edges

• 8' wide sections has aluminum I stiffener in bottom rail

• Replacement parts available, please call office for price

• 6' wide = 72" on center

• 8' wide = 96" on center

• 5" caps sold separately, see pg 42

Tan 25% up charge. Adobe 25% up charge

tall McKinley Section

x 5 Line Post (72") 48MCK-_

tall McKinley Section

or 8')

or 8')

x 5 Line Post (90") 60MCK-_ 72" tall McKinley Section 72MCK-(6' or 8') 5 x 5 Line Post (102") 72MCK-_

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

Quantity Discounts

Total Sections or Posts 11-25 5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

tall McKinley Gate

tall McKinley Gate

tall McKinley Gate

GATES

Rough Opening Size 36" or Less 37" - 48" 49" - 60"

GATES ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted. All gates are made with a permanent diagonal brace.

Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

m onterey

No Returns on Fencing

• 48", 60" & 72" heights

• 2" x 3 1/2 " top rail

• 1 1/2 " x 5 1/2 " bottom rail

• 2" x 3 1/2 " mid rail on 60" & 72" tall

• 6' wide section includes:

7 - 7/8" x 3" pickets

6 - 7/8" x 6" pickets

• 8' wide sections includes:

9 - 7/8" x 3" pickets

8 - 7/8" x 6" pickets

• 11/16" space between pickets

• Height based on tallest picket

• 7" difference between tallest and shortest pickets

• 8' wide sections has aluminum I stiffener in bottom rail

• Replacement parts available, please call office for price

• 6' wide = 72" on center

• 8' wide = 93" on center

• 5" caps sold separately, see pg 42

Tan 25% up charge. Adobe 25% up charge

(6 ' or 8 ' ) 5 x 5 Post (102" tall)

6' wide 8’ wide

Quantity Discounts

Total Sections or Posts 11-25 5% off 26+ 10% off Sections and posts cannot be combined for quantity discounts.

Specify ALL styles of posts ( L ine, E nd, C orner, T ee, B lank) when ordering

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

tall Monterey Gate

tall Monterey Gate

GATES

ARE NOT RETURNABLE For more about gates see page 66

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted. All gates are made with a permanent diagonal brace. Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

s tan F ord

No Returns on Fencing

• 48", 60" & 72" heights

• 2" x 3 1/2 " top rail

• 1 1/2 " x 5 1/2 bottom rail

• 2" x 3 1/2 " mid rail on 60" & 72" tall

• 1-1/8" space between pickets

• 6' wide section includes:

12 - 7/8" x 1 1/2 " pickets

5 - 7/8" x 6" pickets

• 8' wide sections includes:

16 - 7/8" x 1 1/2 " pickets

7 - 7/8" x 6" pickets

• 8' wide sections has aluminum

I stiffener in bottom rail

• Replacement rails available, please call office for price

• 6' wide = 72" on center

• 8' wide = 96" on center

• 5" caps sold separately, see pg 42

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

GATES ARE NOT RETURNABLE

when ordering

GATES

For more about gates see page 66

10% off Sections and posts cannot be combined for quantity discounts.

Gates come with black hardware. White available upon request. For double gates, price as two singles. Hardware adjusted. All gates are made with a permanent diagonal brace.

Hinge post needs reinforcement. See pg 63 for gate post stiffeners.

r ail F ence (2, 3 or 4 rail )

• Post set on 96" on center

• 5" x 5" Post .135" Wall thickness

• 1 1/2 " x 5 1/2 " Rails' .080" Wall Thickness

Interior ribbing for superior rigidity

• 10 1/2 " between rails on 2 & 3 rail

• 6 1/2 " between rails on 4 rail

• 5" caps sold separately, see page 42.

Tan 25% up charge

Adobe 25% up charge

Rail (11/2" x 51/2")

2 Rail 5x5 - 60" Tall Post L ine, E nd, C orner, T ee, B lank

3 Rail 5x5 - 78" Tall Post L ine, E nd, C orner, T ee, B lank

4 Rail 5x5 - 84" Tall Post L ine, E nd, C orner, T ee, B lank

All gates are CUSTOM made to fit your rough opening. All Gates include hardware.

2 Rail Residential Gate

3 Rail Residential Gate

4 Rail Residential Gate

GATES

Rough Opening Size 60" or Less 61" - 96"

GATES ARE NOT RETURNABLE

For more info about gates see page 66

Approximate LIST price per foot. White color (figured with standard caps):

2 Rail =

3 Rail = 4 Rail =

Quantity Discounts

500' - 999' = 5 % Discount

1000' - 1,999' = 10 % Discount

2,000' + = 10% + 5% Discount

s P ecialty i tems