Wrights Farming Register - November 2014 - FULL ISSUE

NOVEMBER 2014

Gruelling 130 hour challenge for

Landini

Farming

register

See page 10

Britain’s Best FOr tractOrs, machinery and equipment

JCB’s new baby Fastrac enters production

See page 4

Get a move on – why the Government See page 7 wants faster tractors

Don’t miss

Midlands Machinery Show Nov ember 12-13

See pages 12-1

3

Absolute power THE immensely powerful John Deere 9R/9RT range has been overhauled and enhanced for 2015 with even more grunt now on offer.

The existing four 9R Series models, plus three tracked, are being replaced with five 9R and three tracked. The extra 9R is

the 9620R – the largest tractor John Deere has ever built.

While the current range is rated from 410hp to 560hp, the 9620R will produce a whopping 620hp.

John Deere’s 2015 trackedtractor range is headed by the 570hp 9570RT.

the all new

Vacuum Bracket

■ Simple & quick fixing for modern electro-hydraulic control boxes straight to the glass, no more drilling of cab interiors.

■ Easily fixed & removed in seconds ■ Available from dealers throughout the area

Dynamica Ltd

Enterprise Road Industrial Estate, Mablethorpe, Lincs. LN12 1NB Tel: 01507 477355 • 01507 473052 Fax: 01507 478832

The 9420R, 9470R and 9520R will be powered by John Deere’s PowerTech PSS 13.5 litre engine but the 9570R and 9620R get a 15 litre Cummins QSX15.

Naturally, they’re all Stage IV compliant and feature the usual eco gizmos such as exhaust gas recirculation and after-treatment.

Continued on page 21

www.mchale.net

2

NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

News

Like us on

facebook.com/WrightsRegister

World harvesting record demolished with CR10.90 THE world record for the most wheat harvested in eight hours has been shattered using a New Holland CR10.90.

The 653hp combine harvester managed 797.656 tonnes of wheat under the watchful eyes of Guinness World Records adjudicator Pravin Patel to clinch the accolade.

Preparations for the feat, on HR Bourn and Sons Farm in Grange de Lings, near Wragby, Lincolnshire, were made last year and the field sown with Santiago wheat was chosen in May 2014.

The record-breaking attempt began at 11.17am on August 15 with ambient temperatures ranging from 18-21°C with light showers from 5.30pm onwards.

The CR10.90’s average throughput was 99.7 tonnes/hour and peaked at 135 tonnes/hour in a crop yielding an average of 9.95 tonnes/ha and an average moisture content of 16.2%.

The record was achieved using a mere 1.12 litres of fuel per tonne of grain harvested, with the straw chopper engaged throughout the day.

Pravin was assisted in verifying the achievement by Alan Robson, Lincolnshire’s chaplain for agricuture, as the second independent witness.

“We are extremely proud to have recaptured the Guinness World Records title for harvesting almost 800 tonnes of wheat in eight hours, breaking the previous record by more

Go go go! The record-breaking CR10.90 zipping through wheat in Lincolnshire.

than 120 tonnes,” said Hedley Cooper, head of harvesting product management at New Holland. “This record demonstrates the unsurpassed capacity and productivity of the CR10.90, especially as the current record of 675.84 tonnes was broken after just six hours and 36 minutes!”

The record-breaking CR10.90 was equipped with New Holland’s Twin Rotor technology featuring twin pitch rotors combined with the Dynamic Feed Roll system (DFR).

Powered by the award-winning

Cursor 16 engine, which develops some 653hp, the CR10.90 was also compliant with the Tier 4B emissions regulations, using ECOBlue HieSCR technology to meet them.

Traction was provided by the SmartTrax rubber track system with Terraglide suspension.

The extra-long 10m unloading auger and 142 litres/minute unloading speed made undeniably quick work of the constantly filling grain tank.

The CR10.90 was also equipped with IntelliSteer auto guidance for accuracy.

WWW.WRIGHTSREGISTER.COM

NOVEMBER 2014

3

TYRE DISPOSAL TRADE & COMMERCIAL Collection & Environmental

Recycling of Tractor-Truck-Industrial & Car Tyres

UK LIMITED

www.envirotyre.com Collection throughout Central & Eastern England

PLEASE CALL 0845 331 2747

4

NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

News

Proud JCB shows off its baby Fastrac PRODUCTION of the three new JCB Fastrac 4000 models has now begun.

They are all powered by a 6.6litre six-cylinder AGCO Power engine which, in the Fastrac 4160, delivers 160hp at 2100rpm rated speed with up to 175hp available when the engine’s full performance potential is exploited under load.

The Fastrac 4190 is next with 189hp rated, and 208hp max; and the Fastrac 4220 has 217hp at rated speed, 235hp maximum.

The 4000 Series will be on show at the Midlands Machinery Show at Newark Showground on November 12-13 courtesy of Granthambased firm R C Setchfield.

“Our engineers have worked long and hard to develop this new Fastrac, which stays true to the original concept in layout and versatility but moves the game on as far as performance and capabilities are concerned,” said Richard Fox-Marrs, the managing director of JCB Agriculture. Compared with the outgoing 2000 Series, the new tractors are more powerful but more economical, stronger but more nimble, and more versatile yet easier to operate.”

He said the tractor offered the core Fastrac features of multiple implement mounting points, all-round suspension, a high-specification braking system, optional four-wheel steering with a tight turning

Bigger tyres, self-levelling suspension and an almost vertical windscreen – the Fastrac 4220 is the result of some serious headscratching on the part of JCB.

circle and selectable steering ratio, and bigger tyres to improve flotation and traction.

New styling apart, the most visible change to the smallest Fastrac in the range is the cab: the Command Plus design provides more space, better visibility and increased comfort.

The driver’s seat comes in Standard and Deluxe specification, can be trimmed in leather and swivels 50 degrees to the right and 20 degrees left.

When folded, the full size passenger seat provides a flat surface for a lunch break. If the optional cool box is specified

You handsome devil you. The Fastrac 4000 has an unconventional layout but there’s no denying those chiselled good looks.

BULK BINS Available from 6 to 28 tons

Wanted and For Sale Tel: 07774 737966

you also get mouldings in the seat back to hold a sandwich box and flask.

Other optional extras for the Command Plus cab include a roof window, MP3 player and Bluetooth radio for hands-free mobile phone use.

Elsewhere, optional additions to the standard specification include four-wheel steering, GPS guidance, a double-acting version of the self-levelling suspension and a package of LED worklights.

JCB believes that the Fastrac’s unusual layout gives it an edge over conventional tractors.

Richard said: “The Fastrac 4000 was designed from the outset to operate implements front and rear, and to make productive use of the rear deck area behind the cab.

“Carrying an extra 2.5 tonnes of seed or fertiliser has a significant impact on productivity; the same goes for increased spray tank capacity.

“If you add in the productivity gains from fast road travel and being able to execute sweeping headland turns 40% quicker than a threepoint turn for ploughing and cultivation, then we soon get to saving a significant number of days over year.”

The Fastrac 4000’s new CVT transmission is intended to ensure “optimum use of power and torque, with seamless acceleration and power delivery, ideal speeds for every situation and ultra-fine speed control for top-quality work with soilengaging and other implements”.

The cab offers 10% more space for the driver too.

WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see page 19

NOVEMBER 2014

5

6

NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

News

Company named ‘dealer of the year’ after customers give the thumbs up LISTER Wilder has been named Farm Machinery Dealer of the Year in awards run by industry magazine Service Dealer.

This comes on top of the Oxfordshire-based company’s second successive five-star dealer award from AGCO.

If you build it they will come – Lister Wilder managing director Ian Nutt with an artist’s impression of his company’s new Wallingford workshop extension.

The firm has undergone a period of growth during which it opened a new branch at Southam in Warwickshire. In doing so it increased its network across southern and central England to eight branches. Lister Wilder’s busy Groundcare division was also nominated for an award in its own category.

Service Dealer took initial nominations from all the main machinery suppliers. “We then did our homework quite carefully and made phone calls to assess whether what the manufacturers told us carried through to customers,” said editor Chris Biddle.

“That confirmed for us that Lister Wilder does indeed take customer service to a very high level. One of the most significant comments was that the company was always prepared to go the extra mile for customers and that it was proactive with exceptional aftersales service. We were also very impressed by its website.”

Lister Wilder managing director Ian Nutt was in no doubt where the credit for the award should go. “It is very much down to our team and to the way in which they respond to our customers’ individual needs,” he said.

“I am very proud of what they achieve. Our association with AGCO, formerly Massey Ferguson since 1947, has been a major contributor to our success and the growth of our business.

“Added to this is the association and support from our key franchises producing innovative products to meet our customers’ requirements in modern day farming.”

One of the big current focuses for the company is the completion of a 3300ft extension to its Wallingford depot which will add some 75% to its existing workshop space.

Bitterness over fruit and veg aid THE NFU has said it is bitterly disappointed after learning that the Government has decided not to take advantage of an EU aid package for fruit and vegetable producers impacted by the Russian trade ban.

Defra officials have said that

“ministers do not believe that destroying edible UK produce would be an acceptable use of public money”.

NFU man Chris Hartfield said: “The reason given for not implementing the scheme in the UK is totally flawed.”

WWW.WRIGHTSREGISTER.COM

NOVEMBER 2014

Like us on

7

facebook.com/WrightsRegister

Tractor drivers told: put your foot down TRACTOR drivers are being handed the opportunity to make better progress when travelling on the road.

The Government is raising the speed limit on tractors from 20mph to 25mph and will allow heavier loads to be transported by road as of spring 2015.

Subject to roadworthiness tests, the speed limit could then be raised again in 2016.

Transport Minister Claire Perry said: “Britain’s farmers have long suffered under outdated rules which simply have not kept up with today’s technology.

“These changes will mean farmers can carry more produce in each

journey – delivering benefits of almost £62 million per year.

“Helping our farmers is a crucial part of the Government’s long-term economic plan and updating the rules to better reflect the capabilities of modern machinery will boost the efficiency of the farming sector and the economy.”

Under the changes, the maximum combination weight limit for tractors and trailers will increase from 24.39 tonnes to 31 tonnes. Tractors allowed to exceed 25mph will continue to be subject to tighter design and regulatory requirements.

The increase in combined weight

means bigger tractors can pull trailers without sacrificing cargo to meet the top weight limit of both tractor and trailer. This will maximise the amount of produce transported in each journey.

The second phase of changes will see a further consideration of increases in weight and speed limits and a roadworthiness test for some agricultural tractors and trailers by summer 2016.

The announcement follows consultations which ran from November 2013 to January 2014.

Existing limits will apply until the first round of changes come into effect in spring 2015.

Floor it! The Government is planning to up the speed limit for tractors on the road from next spring – and it’s allowing heavier loads to be hauled on highways too.

8

NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

News

Plans laid to reunite the beetles– and infect them with nasty fungal disease A RESEARCH programme has been launched to design and produce a control system for beetle pests of peas and beans which does not use blanket sprays of insecticides.

The Processors and Growers Research Organisation (PGRO) says spray applications have recently become less effective, due either to increasing pest pressure or decreased efficacy of pyrethroid insecticides.

Pea and bean weevil and bruchid beetle are common pests in UK legumes. Damage caused by the weevil adult is visible as notching around the leaf margins and, although this damage doesn’t usually significantly affect yield, the eggs laid during feeding produce larvae which feed in the nitrogen-fixing root

Leaf notching caused by pea and bean weevil.

nodules of peas and beans, resulting in yield loss. Damage caused by bruchid beetle is visible as holes in the seed, affecting quality and value to the grower.

“Following discussions with growers over recent years, it has become apparent that current control using spray applications have become less effective,” said Becky Ward, principal technical officer at PGRO. “As a result of this feedback, PGRO, Rothamsted Research, Oecos, Exosect Ltd and BASF plc have set about trying to develop an alternative control method.

“The beetles will be lured to simple devices, baited with beetle-specific attractive odours, where they will be coated with spores of an insect fungal disease. When they leave the device they will spread the disease to other beetles like them.

“This will reduce pest beetle numbers and damage to the crops without damage to the environment or other beneficial and non-target insects such as pollinating bees.

“The insect fungal disease occurs naturally in the soil in the UK and does not pose a risk to other animals. The attractants used are either insect-produced (a specific pheromone) or are odours produced by flowering peas and beans.

“The spores and the attractants will be prepared in a novel formulation that is electrostatically charged and sticks to the beetle’s body and is passed on to other beetles when they meet.”

She said monitoring systems were already available to detect adults when they begin migrating in the early spring.

John, Paul and George. Ringo not pictured. Actually, these are just beetle larvae.

Come together... and get coated in spores. An adult weevil.

The systems comprise traps containing pheromone lures or plant semio-chemicals and are used to aid spray application decision-making.

The aim of this new project is to provide effective and environmentally friendly biological control of both pea and bean weevil and bruchid beetle.

The project is partially funded by Innovate UK and the Biotechnology and Biological Sciences Research Council, with additional support from industry partners PGRO, BASF plc, Oecos and Exosect Ltd. “The partners started detailed work on the project in October with research and investigations being carried out over the next four years,” said Becky.

Rules to halt spread of alien ‘bushytailed rats’ applauded by squirrel group SQUIRREL conservation charities have welcomed the news that the council of the European Union has adopted plans to draw up a list of invasive alien species (IAS) and regularly work on measures to stop them.

The European Squirrel Initiative (ESI) said this was particularly good news as it was to lead to curbs on the ever rising number of grey squirrels in Europe.

“We are delighted that the council of Europe has now formally adopted regulations which lay down rules to prevent, minimise and mitigate the adverse impact of invasive alien species on bio-diversity,” said ESI spokesman George Farr.

“Grey squirrels are present in the United Kingdom, the Republic of Ireland and Italy and it is important that they are listed as species of Union concern.

“They cause significant damage to our biodiversity and ecosystems and it is vital that they are controlled where they already exist and their spread is prevented throughout the rest of Europe”.

The regulation also establishes a surveillance system for the early detection and rapid eradication of IAS. Furthermore, member states must provide for penalties if the regulation is not correctly applied.

Not a friend in the world – the grey squirrel. The European Squirrel Initiative is hoping that a new Euro-regulation will result in them being detected and eradicated. Birdphotos.com

The regulation, which is a binding legal instrument, will take effect from January 1, 2015.

For more information visit the ESI website: www.europeansquirrelinitiative.org

WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see page 19

NOVEMBER 2014

9

10 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

News

Like us on

facebook.com/WrightsRegister

Let’s off-road!

It was the ideal rally motorsport course – a bumpy forest track, steep inclines and tight turns. To celebrate its 130th anniversary, Landini decided to have a 7-215 Dual Power tractor driven around it continuously for 130 hours…

THE rally course near Lucca in Tuscany is designed for cars that can go sideways and top 100mph on the straightaways.

So driving a 7-215 Dual Power tractor around it at an average speed of 4.7mph would be easy, wouldn’t it?

Tell that to the 75 drivers who worked in shifts to keep the machine on course for six days straight.

“The drivers each had their own driving style and ability, making this endurance test of the tractor even more difficult and severe,” said event organiser Antonio Salvaterra of Landini manufacturer Argo Tractors.

“The course, which is used by professional rally teams for training, really put the tractor’s suspension systems and driver comfort to the test.”

He said the average speed of 4.7mph reflected the more challenging sections of the course, which tested the skill and nerve of the drivers as well as the durability and manoeuvrability of the tractor.

“The sturdiness, ease of use and high levels of cab comfort evident in the Landini 7-series tractor contributed to a positive outcome,” said Antonio.

Schools in Fabbrico, northern Italy, damaged by a 2012 earthquake that also affected the Landini factories, will benefit from a donation of €8000 (more than £6000) from Argo Tractors and sponsors, based on the distance completed over the 130 hours – 616 miles.

The venture was supported

by Landini engine supplier FPT Industrial; tyre maker Michelin; and ZF, supplier of the tractor’s 24x24 speed semi-powershift transmission. All had technical staff on hand.

Hydraulics and mechatronics specialist Bosch Rexroth; Grammer, supplier of the high-spec air seat installed in Landini 7-series tractors; air conditioning maker Denso; and Adam Pumps, which supplied a refuelling rig, also supported the event.

Now in enduro blue

The special metallic (Metallizzato) blue colour of the enduro tractor is now being offered as an option by Landini distributor AgriArgo at £1144 in place of the regular solid light blue.

It’s available on the trio of six-cylinder 7-series (151175hp rated, 165-212hp max power) as represented in the endurance event by the 7-215 Dual Power and also on the three-model Landini 6-series (131-160hp rated, 143-175hp max power), which is the fourcylinder version. All are

Up on the edge...

...and over the top – one of the more challenging sections of the rally driving course.

Can a tractor look tired? This Landini 7-125 Dual Power does; after 75 drivers spent 130 hours clocking up 616 miles on a rally driving course in Tuscany.

The tougher sections required extra care after nightfall.

Drivers found ‘working’ in the dark a little tricky.

powered by fuel-efficient engines from FPT Industrial – the engine is a stressed assembly in the four-cylinder models for compactness, while the six-cylinder versions have a cast half chassis for strength and durability, especially when operating front- and rearmounted equipment.

Both have the Roboshift transmission, a proven unit from ZF, with 24 forward, 24 reverse speeds, powershuttle and four-step powershift, and there is a creep version with 40x40 speeds.

The new Lounge cab, with its modern instruments, electronic controls and hide-away passenger seat makes a good place to work – even if the tractor isn’t occupied for 130 hours continuously.

Light it up – the Landini endurance trial continued through the night.

Several nights in fact.

There are plenty of places where going up hill and down dale like this is just part of everyday farming life.

The Landini was required to roll up and down hills on a regular basis.

There aren’t that many fields where you’d need to tackle this sort of slope.

Fast but bumpy forest tracks were apparently a good test of operator comfort.

WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see page 19

NOVEMBER 2014 11

12 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

Auctions and Events

Host of innovative kit lined up for new show

Landquip’s air-riding 5200 litre InTrac sprayer, featuring a new chassis, tank design and narrow folding aluminium boom, will be on show at the Midlands Machinery Show on November 12-13.

They fold up tight but the InTrac sprayer’s booms can stretch out to a width of 44m.

LANDQUIP crop sprayers will be unveiling the first of two new steering axle trailed sprayers exclusively at the inaugural Wrights Farming Register-backed Midlands Machinery Show.

It is among a host of new machinery and equipment that will be showcased at the Newark Showground event on Wednesday, November 12, and Thursday, November 13.

Landquip’s air-riding 5200 litre InTrac sprayer features a new chassis, tank design and narrow folding aluminium boom.

The high capacity 30mph commercial steering axle will be offered with hydraulic or air brakes.

The polyethylene tank has an extremely smooth inner surface making it easy to keep clean using three powered rotary wash heads and clean water from a 700 litre wash tank.

The new, low centre of gravity tank design is shaped to dissipate liquid surge, making the machine stable in the field and safe on the road.

A sump and in-tank stainless steel multi-outlet agitation tubes ensure thorough mixing of the liquid throughout 50-60 hectares of spray application.

The machine is designed to

efficiently apply large volumes of liquid fertiliser through Landquip’s Umbrella sevenoutlet fertiliser jets. The InTrac’s larger tank capacity also encourages users to apply the recommended volume rather than cutting water rates to suit tank size and workloads, ensuring the most efficient use of chemical when spraying in dry conditions.

The InTrac can be specified with high volume hydraulic or pto driven pumps with outputs of 450, 700, or 1300 litres/min.

High flow boom distribution plumbing enables even application of 1200+ litres/hectare across boom widths of up to 44m.

Landquip’s InTrac offers 800mm clearance throughout its length and can be further enhanced by fitting a Scharmuller Euro high hitch for 80mm ball drawbar.

Chemical induction is carried out by the use of a large 50 litre capacity stainless steel chemical hopper equipped with twin can wash units. The hopper is automatically washed internally on closure of the side folding lid.

A new touch screen gives the operator fingertip control of all programming and command functions. Strategically

Look at the tank on that. The InTrac 5200.

positioned cameras utilise the large 8.4in screen to show the operator what is going on around the machine.

The CanBus linked Commando hydraulic switch panel offers easy boom operation of bi-fold or tri-fold booms.

Typical extra features include GPS auto section switching and auto boom height control.

The machines are intended for 180+hp tractors. Prices start at £63,000.

The second InTrac model, with a 6000 litre tank, will be unveiled at LAMMA 2015 in January.

French fancy

The French-made Carre INRO strip-till will be displayed at the show by Lincolnshire firm Willow Farm Machinery.

A range of four different beam chassis are available to allow for a wide range of different row widths.

Standard on the INRO is nonstop hydraulic break back, parallelogram linkage for deep control and adjustments can be made to five keys elements of each unit with simple pins, negating the need of tools. Each row can be adjusted using one bolt allowing the element to be moved on the chassis beam.

Options on INRO rear linkage kits for seed drills include liquid and granular fertiliser, a pto coupling for a seed drill and a selection of different opening/deflector disc, roller and points.

For more information visit http://willowfarmmachinery.co.uk

Rural pursuits extravaganza enjoys ‘tremendous atmosphere’ BLUE skies and sunshine brought the 2014 Countryside Live event to a close, as organisers announced one of the highest visitor figures in its 12 year history.

A total of 12,215 visitors came through the gates of the little sister event to the Great Yorkshire Show, which took place over the weekend of October 18-19.

The attendance figure is the second highest, with the record standing at last year’s total of 12,689.

The rural extravaganza combined classes for cattle, sheep and horses with hands-on activities, demonstrations and displays ranging from horse shoeing to tug-of-war contests and from show jumping to mountain biking.

Show director Bill Cowling said: “Countryside Live goes from strength to strength and this year is certainly one of the best, if not the best ever. It is a mark of the stature of Countryside Live that so many of the livestock winners will go on to achieve further successes on the winter fatstock show circuit.

“As soon as the gates opened, there was a steady flow of people coming in, and the atmosphere’s been tremendous. It’s very much a fun event, but it is also a wonderful showcase of the farming industry.”

It was Ladies Day in the cattle section with heifers

taking both the Supreme Championship and Reserve. For the fifth time, Phil and Sharon Sellers took the top honours at Countryside Live with their 604kg Limousin cross heifer More of That.

The Reserve title was taken by the Alford Showteam from Devon with their 562kg British Blue Cross, Pokerhontus – her first major show outing.

The pure-bred Dutch Texels belonging to Ian Clough and family took the honours in the sheep section, winning both the Continental and overall championship. The 94kg pair of ewe lambs are from their 100-ewe flock at Pickering, North Yorkshire.

Eight-year-old Rosie Bluden of Knaresborough enjoying her day out at Countryside Live.

LEFT: Richard Lancaster, 14, of Clitheroe, winner of the Sheep Young Handler Championship, with steward Philip Hughes at Countryside Live 2014.

WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see P19

Knight has upgraded the engines on its range of sprayers and will be keen to demonstrate the benefits of its cab filtration system at the Midlands Machinery Show.

Knight’s on display

Self-propelled sprayers from Knight Farm Machinery will be on display at the Midlands Machinery Show too.

The company is now fitting 2000 series self-propelled models with EU Stage 4 Final engines, which produce low emission levels. These engines will shortly be fitted to 1800 series too.

Knight said: “The engines, which are superior to the

interim Stage 3B/Tier4i units, have an advanced exhaust gas after-treatment system as well as running with Adblue diesel exhaust fluid.

“All the self-propelled machines are now fitted with CLAAS-designed premium Vista cabs with air-suspension and excellent all-round visibility.

“A new option is Category 4 cab filtration, giving increased protection against hazardous

The Carre INRO strip-till comes in a range of four different beam chassis to allow for a wide range of different row widths.

substances. Knight is the only UK sprayer manufacturer offering this feature.”

The choice of tank sizes ranges from 3600 to 6000 litres and booms up to 36m wide.

Like the self-propelled models, Knight offers various application control systems,

including Hypro Duo React twin-outlet nozzles and single nozzle switching instead of boom section control.

ISObus control via compatible terminals is also available, allowing operators to integrate their sprayers with their existing control system.

NOVEMBER 2014 13

14 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

Landscape and Forestry

Don’t chicken out – plant a few trees

P LA NTING NEW H EDG ES O R W O O DLA ND? Ca ll u s fo ra ll yo u rFo res try Su pplies

•Trees a nd Hed ging Pla nts

Native Provenance Handled w ith GreatCare

•Tra ns pa rentSpira l G u a rd s -‘Ow n Brand’

BetterQuality,overlapped foreasy Chem icalControl

•Fine M es h Shelters fo rShru b s & Trees No Outdated Tubes!

•Pla s tic M es h D eerFenc ing

Fa rm Fo res try Co Ltd

Tel: 0 15 8 8 6 5 0 4 9 6 Fa x : 0 15 8 8 6 5 0 6 3 1 w w w .fa rm fo res try.c o .u k

A WOODLAnD conservation charity is urging free-range egg producers to plant trees on their farms, claiming they could benefit from increased productivity and profits.

According to a free-range egg supplier who works with the Woodland Trust, tree planting could earn poultry farmers an additional £20,000 per year.

The trust is now encouraging other free-range egg producers across the UK to carry out tree planting schemes of their own.

The Lakes Free Range Egg Company in Cumbria has planted 40,000 trees on its land, creating more than 15 hectares of woodland.

The firm’s managing director David Brass said: “The cost benefit of tree planting is one of the best in farming, and there is the opportunity to significantly increase income.

“A poultry farm with 64,000 hens could make an additional £20,000 per year as a result

of improved egg production and quality.

“Our planting cost £2000 per hectare, but the farm achieved payback in just six months, and the benefits are outstanding. Trees are now an integral part of our business and I would urge any farmer to consider planting them as it makes economical and environmental sense.”

The Woodland Trust is now working with the Lakes Free Range Egg Company to assess the environmental benefits of tree planting on the wider landscape.

Glenrath Farms, in the Scottish Borders, planted trees with the Woodland Trust at its new farm earlier this year to provide shelter and screening for its hens, and to reduce ammonia emissions and runoff.

Karen Campbell, its

Hens lay more eggs when they’ve got woods to roam around in. Fact.

Apparently. PHOTOS: PETER DEAn

These woodland wanderers repaid the farm’s investment in trees within a matter of months.

operations director, said: “Encouraging good ranging behaviour is important not just for the welfare of the hens, but also for production.

“We believe tree planting on our ranges helps us to meet the consumer demand for high quality free-range eggs while also increasing the efficiency of production.”

Woodland Trust woodland creation director John Tucker said: “As well as improved hen welfare and egg quality, tree planting offers a number of other benefits to farmers.

“Trees planted as shelter belts can act as windbreaks and provide wood fuel; and various wildlife species, including birds,

mammals and insects, will also be able to flourish within this much-needed habitat.

“With new requirements coming into effect this month where ranges for all flocks on the Freedom Food scheme must have 5% natural cover, now is the perfect opportunity to contact the Woodland Trust and start making the most of this wonderful asset.”

The Woodland Trust has produced guides to planting trees on poultry farms.

To read these and find out more about the advice and support available from the trust, either call 01476 452356 or visit woodlandtrust.org.uk/planttrees/on-farms

Komatsu’s going out on a limb with new quartet FOUR new timber harvesters are being launched by Komatsu Forest.

Each features a completely new cab with a damping option and an eco-friendly Stage IV engine with keyless control and a new media hub.

They also feature a completely new hydraulic system with dual hydraulic circuits.

“We’ve focused on the operator and made every effort to maximize production from every possible angle in a sustainable manner,” said Komatsu Forest product manager Tobias Ettemo. “not only is this our most extensive harvester launch ever, it’s also the dawning of a brand new era.”

The four new harvesters are the Komatsu 901, which is designed specifically for thinning; the Komatsu 911, which is an all-round harvester; the Komatsu 931, for demanding final logging; and the Komatsu 951, which is the largest and most powerful harvester in the line-up.

Tobias said: “Much focus has been placed on operator ergonomics. The new harvesters

build on the well-proven concept of a centrally placed crane and cab and a swing axle that together with the cab’s tilt cylinders offers unique stability and operator comfort.

“The cab enjoys much better upward and downward visibility, 360º of cab/crane rotation and low noise levels.

A major new feature is the industry’s first remotecontrolled keyless system, which can control the heating and the main circuitbreaker/lighting from a distance of up to 300m (about 1000ft).

“The keyless system is coded by the operators so that when they activate the main circuit breaker they are automatically logged in to MaxiXplorer with the appropriate operator profile.

“The cab also has a completely new media hub, MediaZone, that includes several inputs for both USB and AUX connectors.”

He said the harvesters also featured a new three-pump hydraulic system, which provides interaction between the crane, the head functions and the transmission.

This means that there is always sufficient hydraulic

Got some particularly sturdy trees in desperate need of chopping? Well, step right this way sir, and let me introduce you to the humungous Komatsu 951.

power for the operator to perform several tasks at the same time.

“The three-pump system enables the operator to use high flow rates at low engine speeds while the transmission circuit is always available to manoeuvre the machine,” he said.

“The working hydraulics are separate from the transmission, split into two hydraulic circuits.

These working hydraulics circuits can be operated separately or together, depending on the function and oil requirements.

“The result is that the operator can use several crane and head functions together with maximum hydraulic power, such as to slew the crane, feed a log and manoeuvre the machine.”

The harvesters’ engines are among the first on the market to fulfil the requirements of Stage IV/Tier 4 Final, the most stringent requirements on minimized emissions of environmentally hazardous particles and nitrogen oxides.

The cooling system has high cooling capacity and the components are sized for high air flow rates. This provides high cooling capacity, reduced fuel consumption and lower noise levels.

All four harvesters feature the Komatsu Comfort Bogie with the portals concealed inside the rims.

In addition, they all have parallel cranes with high net lifting power that are fast, effective and easy to operate.

Between the crane and the head is the brake link, Komatsu Multi Disc Brake. The harvesters can be supplied with a choice of cranes with different reaches and a number of different

WWW.WRIGHTSREGISTER.COM

NOVEMBER 2014 15

Only 79p an issue when you subscribe – see page 19

FENCING CONTRACTOR Robo mowers take the high road to success at roadshow A ROBOTIC mower was turning heads at a roadshow held across central Scotland recently by machinery firm STM Road and its long-standing dealer Fraser Robb.

The STM Robo range includes five mowers, ranging from the Mini to a unit created to have its own attachments.

Two machines have already been sold, and a third RoboFlail looks set to be sold too.

Kenny Hunter of Fraser Robb said that one customer had come to the roadshow feeling disgruntled with robo mowers in general having bought one made by another company.

The machine had apparently been so beset with niggling problems that it was withdrawn from service and eventually returned to the manufacturer.

Kenny said: “So we presented the STM machine to the guys who had operated the other product for six months. They were delighted by the climbing ability and the superb cut quality of the new machine; and the recycling mulching deck was a complete success.

“The engine and battery pack provide a great balanced power delivery and the controller was identical to the unit they had used previously.

“The machine sale was one of the most satisfying I have had in many years as it was the completion of a very difficult sale and to date the machine has performed its duties admirably.”

The machines are available for demonstration through the STM dealership network. To find your nearest dealer ring 01789 488450, email info@st-mach.com or visit www.st-mach.com

• POST & RAIL • STOCK, NET AND BARBED WIRE • RABBIT FENCING

Time to split... some logs with the Wessex LS-100 MACHINERY maker Wessex claims that its LS-100 logsplitter “actually turns a boring, backbreaking and time-consuming chore into an enjoyable task”.

While the enjoyment factor is probably a little subjective, the LS-100 can certainly handle logs up to 18in or 450mm in height.

The company goes on to say: “Strong, simple, quick and easy to fit to any tractor with a category 1 three-point linkage, the LS100 powers effortlessly through splitting logs with up to 10 tons of hydraulic force, depending on the tractor hydraulics.

“A floor-level bed makes loading logs on to the splitter safe and easy, while the twohanded operation satisfies the health and safety requirements.

“The difference the LS-100 makes, compared to the boring

Stewardship Scheme work undertaken Tel. Julian Nugus 01469 - 531137 Mobile: 07850 - 857988

More enjoyable than doing it by hand? The Wessex LS-100 takes the strain out of splitting logs.

and time-consuming splitting of logs by hand, can be measured in the time saved by the large numbers of contractors, landscapers, farmers, large estates and smallholders who rely on their machines year in, year out.”

For more information visit www.wessexintl.com/products/ groundcare.php

FA8! -#'8A77 G6; E487*8#*7D GAK;7=A9#K'D 1:8*768I AK; 1*K=#K' 5:K68A=6:87 B%$6G<=GJH 6&9H!<6H&!J <94 JF%%=G$!J H& ,5B/ ?5B <94 0&F9H!(JG4$ BH$@<!4JIG% J6I$;$J *F== -=<9HG9K <94 2<G9H$9<96$ B$!DG6$J "&! ?$4K$!&@J <94 7&&4=<94J B%$6G<=GJHJ G9 HI$ G9JH<==<HG&9 &" BH&6A/ .$$!/ ,#FG9$ <94 -&JH ) E<G= *$96G9K

1*K=#K' 5<!K$ JH&6AJ &" <== JG'$J &" !&F94 %&JHJ/ J#F<!$ J<@9 %&JH ) !<G= <94 K<H$ %&JHJ+ 3== JG'$J &"

&D$!9GKIH 4$=GD$!( J$!DG6$+ 0&9H!<6H K!&@G9K &" I&;$ %G6A$4 J$$4J+ 5&6<= %!&D$9<96$ J$$4 6&==$6HG&9J G9 <== <!$<J+

H*;'*MAI#K' 5G96&=9JIG!$ K!&@9 ?<'$= JH<A$J <94 :G94$!J <94 J#F<!$ J<@9 JH<A$J+ 0<!!(G9K &FH 0&F9H!(JG4$ BH$@<!4JIG%/ ,5B/ ?5B &! ,7CB @&!A FJG9K (&F! &@9 =<:&F!8 >I$9 =$H FJ #F&H$ &9 HI$ JF%%=( &" HI$ ;<H$!G<=J+

Tough and versatile – the STM Robo Mini has been the toast of Scotland lately.

5:K6A=6N FA8! -#'8A77D G:46%D G#K=:MK7%#8*D GE>> @/J .*MN @>(@$C&@)<@> :8 @>(@$C+>@@+& 1A0N @>(@$C&>@(@> F:?#M*N @$"$>C>"@+)( 222BLA8!3#'8A77B=:B4!

16 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

4x4 review

By MARk STONe

Don’t believe the hype: this 4x4 is muddy brilliant IT MIGHT come as something of a surprise when you realise that Fiat’s little Panda has been around since 1980. It was conceived as a utilitarian multipurpose car of the Italian people – very much like its well known German equivalent.

Like most simplistic creations given time though, the Panda has changed. While the little practical cube shaped core value still remains, this Fiat’s métier has taken a different direction.

Granted the Panda remains one of the most capable city cars and the 4x4 versions can tackle surfaces that would embarrass supposedly far more serious off roaders. But if Fiat’s marketing and pricing strategy is to be believed, the Panda’s car of and for the people image has long been left behind.

Now it’s aimed at cool, trendy, image conscious 20somethings. This means if Fiat’s stratagem is correct the latest Pandas, especially the 2014 specification Cross 4x4, are as much a fashion and lifestyle statement as they are must have transportation. Well that’s what Fiat told me.

My advice is to read the socially aware sales guff and then throw it into the bin as quickly as possible. Why? Because struggling to get out of what I personally regard as unadulterated garbage is a car that is one of the most capable small hatches I’ve yet driven.

C L A S S IC LA N D RO V E R S B R ITISH C L A SSIC S H E R ITA G E M O TO R S P A R TS 1948 to D a te R E TA IL TR A D E E X P O R T SP E C IA L P R O JE C TS R E STO R A TIO N S M A N U FA C TU R IN G

C o untry W o rksho ps,R isega te, N r. S pa lding,L incs P E 11 4E Z

Tel/Fa x: 01775 750223

w w w .british4x4centre.co .uk

The Panda name has been part of the Fiat line up since 1980.

And it doesn’t need some overpaid PR idiot to get in its way, Fiat’s latest Panda Cross a triumph of technology and almost unrivalled ability.

The car came about in the first place after the good folks of the Italian mountains asked Fiat if it could build a 4x4 version of the Panda and many of the original 999cc Steyr Puch powered cars are still providing sterling service though they ain’t overly trendy any more.

Similarly, the basic Panda 4x4 from inception to the latest model has a proven track record the envy of many a manufacturer. But like all successful models, the Cross elevates the Panda into a crossover market that increases the model’s appeal.

Like previous versions the new Cross incorporates the distinct split frontal lighting and funky daylight running illumination, a fully functional skidplate, new bright red towing eyes, an even higher 161mm ride height, unique to the model alloy wheels and oversized 185/65R15 Goodyear Vector 4Seasons rubber.

The short bonnet ensures an uninterrupted forward view while arch protection and deep mouldings protect the sides of the car. Four large doors and a full depth tailgate allow nearly uninterrupted access to the cabin and 225cu m of luggage space, roof bars adding to the

The new Panda Cross continues the model’s distinctive front lighting design.

car’s capacity along with a maximum towing capability of 900kg.

The interior is a positive homage to fashion – the bronze dash, door trims and specially woven seat covers unique to the new model. As with the lesser versions, the Cross revels in cubist references, the steering wheel, easy to read instrumentation, controls and

even the gearlever all hip to be square.

Where the Cross differs from the rest is in the Terrain Control located just to the rear of the short gearlever, the deployment of the rotary control all that’s needed to inform this chunky new Panda that hostile surfaces are soon to be encountered.

It’s with a degree of irony that

of the two engines the one I’d recommend the least is the most popular. Outselling the diesel by a ratio of 60:40, the 875cc 85hp TwinAir is, it would seem, the chic power plant of choice, the six-speed gearbox and crawler gear seemingly having a magnetic draw.

My suggestion however is to opt for the 1.6 MultiJet II turbodiesel, the 80hp unit kicking out 144lb-ft of usable torque, the five-speed manual box allowing the driver to capitalise on this small engine’s free revving willingness, flexibility and economy, Fiat suggesting a combined consumption figure of around 60mpg.

Motive power aside, both engines and transmissions transfer 98% of the drive to the front wheels until any form of slip is detected. Drive transfer is then carried out in less than a 10th of a second. Controlled via an electro-hydraulic multiplate central differential, at speeds lower than 30mph the diff can be locked out while the hill decent is best utilised by placing the car in neutral.

It’s the last thing any true 4x4 driver will ever tell you to do but by disengaging the gears and keeping your feet well away from the pedals, the Panda is able to negotiate itself down the steepest slopes. All you need do is steer.

To complement the fully functioning skidplate the tow hooks have been picked out in bright red.

WWW.WRIGHTSREGISTER.COM

NOVEMBER 2014 17

Only 79p an issue when you subscribe – see page 19

The cubist interior finish is unique including the bronze dash and trimmings.

The three drive modes are controlled from the quick to deploy Terrain Control Selector.

FAST FACTS

Fashionable, fun and functional, Fiat’s new model Panda Cross 4x4 is outstandingly capable both on- and off-road.

On the road the Panda is sharp and responsive, only the increase in ride height over the standard model inducing mild body roll when pushed hard into corners. Even then the handling remains neutral, the initial physical tilt having no noticeable effect on the car’s attitude during rapid changes of direction.

The wide tyres and sharp, quick to respond steering allow the Fiat heritage to shine through. The end result is a small super mini that inspires the driver to explore handling levels that are beyond the

comprehension of other similar sized vehicles, a fast crosscountry sprint undertaken with the same levels of zeal normally reserved for far more sporting motors.

But while on-road performance exceeds most drivers’ expectations its offroad that the Panda Cross sets itself apart. Keeping to first and second gears, only the most severe terrain will cause the Panda any form of problem.

With approach, ramp over and departure angles of 240, 210 and 340 and maximum off horizontal slope and tilt

Although a petrol version is available we recommend you opt for the 1.3 Multijet II diesel engines.

figures of 70% and 55% with the diff locked and the descent activated, there’s little the Panda won’t manage.

And with the air filter now located as high within the engine bay as it’s physically possible to achieve, the wading depth of 739mm more or less allows the Panda to submerge up to a third of its physical being.

What is most impressive is that from the driver’s perspective is that all you need to do is ensure the Panda is heading in the right direction.

To a degree, there’s hardly any effort required to keep the Panda on track. It’s as easy to drive off-road as it is on, though the ersatz steroidal external looks might suggest otherwise.

While the new Panda Cross might have the looks of an oversized toy, its actual abilities place Fiat’s new mini 4x4 firmly in the serious off-roader category. Price wise the Panda Cross isn’t cheap, the entry level petrol coming in at £15,945, the

Compact it may be, but the Panda Cross is more than capable of hauling five passengers and a decent sized load.

Black surrounds ensure the rear light pods stand out from the lesser models.

Model: Fiat Panda Cross 4x4 2014 spec Price: From £16,945 diesel Engine: 1248cc, fourcylinder 90bhp turbodiesel Transmission: Five-speed manual Top speed: 99mph CO2 emissions: 125g/km Combined mpg: 60.1 (factory figure)

Unique alloy rims and tyres plus an increased ride height give the new Panda Cross genuine mud plugging capabilities.

equivalent diesel £16,945, and the fully accessorized version on test in excess of £18,000.

While I personally consider the pricing structure to be, shall we say, on the optimistic side, Fiat assures me that it has no problems selling them, to a degree that there’s usually a short waiting list. Similarly, while the bright contrasting colours look good now, my suggestion is to go for the white or dark metallic green bodywork.

Bright yellow or red might look good now but in a year or two’s time it will be the more conventional hues that will retain their used car desirability

It might not look like your first choice for tackling the roughest toughest terrain but when it comes down to it the Panda Cross really can cut the mustard where it counts.

since, like many Italian cars, ownership tends not to extend beyond three or four years, the right colour enhancing residuals.

If you’re buying the new Panda Cross 4x4 to impress yourself as much as your friends then the car will keep you in fat free mocha, chocachino, vegetable smoothie conversations until the free range cows come home, especially if you push the

boundaries and venture across a gravel pathway or low kerb.

Buy it for what I’d refer to as the right reasons and not only will you find a genuinely remarkable small car but you and Fiat’s new Panda Cross will be the ones axle deep while rounding up the cows the others are waiting for to return home. You might even have a thermal cup of coffee in your hand while doing so, preferably full fat!

18 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

Energy and technology Cow insider widget wins award Guidance gizmos a-go-go from New A DEVICE that enables farmers to view data from sensors swallowed by their cows has won an award for innovation.

The eCow farmBolus pH monitor, designed for dairy farms, can report continuously from inside a cow’s rumen for five to six months.

It won the Award For Innovation category at the dairy industry’s 2014 Farm Business Cream Awards, held at the National Motorcycle Museum in Solihull, West Midlands.

It is weighted to ensure it stands upright inside the rumen – the part of a cow’s digestive tract where ingested feed is fermented.

Data is stored on the farmBolus then downloaded to the eCow handset and uploaded to the company’s data servers. Once the data has been uploaded, it can be viewed using the company’s data viewing software.

The information can offer insights into acidosis, feeding patterns, the benefits of new feed regimes, quality of forage and drinking events.

In addition, eCow says that with the correct interpretation, pH data can lead to improvements in milk yield and animal health. farmBolus measures 27mm by 115mm and collects data for 90-150 days.

Highly commended in the same category was John Deere’s HarvestLab sensor system.

Designed for the 7080 and new 8000 Series self-propelled forage harvester range, HarvestLab is able to accurately measure crop constituents such as sugars, starch, protein and crude fibre content, as well as dry matter, while on the move.

Holland on display at CropTec 2014

It looks fantastic, all clean and new, but after six months inside your cow, the high-tech farmBolus is unlikely to look quite so perfect.

Mounted on the forager spout and taking crop readings 17 times per second, the HarvestLab system can also be removed to allow it to be used for stationary feed analysis of different forage ingredients and for clamp silage analysis in the winter.

The new ability to measure sugar as well as dry matter levels in real time also provides the opportunity to manage the silage additive process more efficiently, using a range of commercially available automatic variable rate application systems.

The latest version of HarvestLab is based on near infrared (NIR) sensor technology manufactured for John Deere by Zeiss Jena, and robust constituent sensing calibration curves developed specially for John Deere by various partner companies including DairyLab, depending on the crop.

Using this additional crop data, the HarvestLab sensor can help livestock farmers to optimise their herd’s performance from silage.

Similarly, operators of new bioenergy plants can more easily calculate the optimum amounts of biomass material to use for efficient energy production, particularly as starch content is the key to this process.

FARMERS will be able to see for themselves how New Holland’s Precision Land Management (PLM) system works when the company shows it off at CropTec 2014.

The event takes place at the East of England Showground in Peterborough on November 1920. New Holland will be showcasing its full range of solutions, including displays, guidance and telematics systems, office software, variable rate applications and section control.

PLM Connect Telematics will be presented to demonstrate how real time analysis can lead to better decision making and increase productivity.

The state-of-the-art communication system can facilitate the control and supervision of equipment from a centralised office, allowing machine operation to be monitored and managed without the need to spend time travelling between separate operations.

The complete range of displays will also be exhibited;

Missing some stats? Worried that you’re not in the picture? New Holland’s got you covered with systems enabling you to monitor your equipment from a PC, tablet or phone.

from the basic EZ-Guide 250 and the intermediate FM-750 up to the advanced FM-1000 and XCN-2050, as well as both the Intelliview III and IV. Included in the demonstration of New Holland’s guidance offering will be the autoguidance IntelliSteer system. The EZ-Pilot assisted steering system will be shown to demonstrate the business benefits of accurate and efficient control.

In addition, input control

systems, such as the ISOBUS task controller (through the Intelliview IV display), will demonstrate the cost savings possible through section control.

Meanwhile, office software such as PLM Mapping will show farmers the potential of viewing and printing maps and yield reports from harvested fields, as well as more advanced features such as creating guidance paths along with prescription maps.

Dow says effectiveness of Spitfire will blow you away

The innovative HarvestLab sensor in position and ready for the off.

John Deere’s clever sensor lets you measure crop constituents such as sugars, starch, protein and crude fibre content, as well as dry matter, while on the move.

DOW AgroSciences says it has the answer to the headache of oilseed rape – Spitfire.

The formula is a blend of florasulam and fluroxypyr intended to provide fast and effective control of a range of broad-leaved weeds, including volunteer rape and volunteer beans.

Dow AgroSciences herbicide

specialist Stuart Jackson said: “It’s both effective and convenient with a wide range of compatibilities with graminicides, autumn residuals and BYDV insecticides in a tank mix – important features for those battling to get on to wet land.

“It works in cool conditions and is rainfast in an hour.”

Tally ho chaps – give those volunteer blighters a taste of Spitfire, what!

Sports & Hobbies

The actress, the bishop and the Beretta 92F pistol Selling guns is a serious business but there were times when former salesman Chas Baird found it difficult not to see the funny side…

IN this last batch of stories from my time in the gun trade I’ll start with a cautionary tale.

Anyone who has worked in retail will tell you that you develop an instinct for a potential sale. You can, however, come unstuck.

I was on my own in the gun room on a wet morning when in walks a chap about my own

age, shaggy hair and beard and pretty scruffily dressed – the only clue that all might not be as it seemed was that he had a very educated speaking voice.

He was interested in air rifles and I spent some time giving the usual lecture about the difference between spring and pneumatic, scopes, silencers and so on, thinking that I was Tel:01724 852359 Fax:01724 84 8775

Ste a dfa s t in a w o rld o fw a ve ring s ta nda rds

BILLIARD TABLEM AN UFACTURERS Ta bleFittin g ! Ta bleRen ova tion

Din in g Ta b les

Over40 years experience

O a k Ba rleyTw istCo m b in a tio n S n o o ker/Po o l/Din in g Ta b le

•La rgestock ofa n tiqu eta bles •Com bin a tion sn ooker/ d in in g ta bles •Alla ccessoriesa n d spa res •Tota lrefu rbishm en tofta bles •Deliverya n d in sta lla tion s ca rried ou tperson a lly •Fu llSizeTa blesa va ila ble

SPRIN G W OOD LOD G E,ERM IN E STREET,APPLEBY,N R SCU N TH ORPE,LIN CS.D N 15 0D D Em ail:sales@ cheshirebilliards.co.u k

w w w.ch e sh ire b illiard s.co .u k

almost certainly wasting my time. It transpired that he had a serious rabbit problem in an enclosed (but not rabbit proof) garden/orchard.

He suddenly asked what was the best rifle for the job – I asked if he was going to walk or sit out. On discovering that he would be sitting out I took a Weirauch HW 100 from the rack. At that time (about 2002/3) it was the thick end of £400 just for the rifle.

By the time he had picked scope, silencer, deluxe case, two dive bottles and hoses, back up hand pump, pellets and some other bits and pieces the bill was well in excess of £1000. He produced a very superior gold card, paid for the lot and arranged to collect later in the day after I had fitted the scope and zeroed the rifle.

To add to my discomfort when he came back he thanked me very politely for taking care of him and insisted on giving me 10 quid!

He became a very good customer and I got to know him quite well – it turned out he was a technical author who

made his money by making difficult subjects understandable to the layman.

He also told me that on the day he first visited us he had visited another, very well known Birmingham gun shop and had been made to feel uncomfortable by a welldressed young Hooray Henry!

Let that be a lesson to all of us in the retail sector.

About the same time I took a call from the police. A very nasty murder had been committed in Scotland using a weapon of unusual calibre – I cannot now remember exactly but I think it was .319 cal. The police had found that at one time we had had a stock of 110 rounds and needed to know, as a matter of some urgency, how it had been disposed of. I said I would look into it as soon as I could. As soon as I got a moment I lugged out the ammunition register. No nice easy computer records – this was a very heavy book about 24 x 18in.

Fortunately some of the older records had been archived but potentially it was still a hell of a

lot of paper to trawl through. I found it reasonably quickly and cracked up! My colleague Bob asked me what was so funny. I just told him to hang on and called the police back.

“Is that Mr Bloggs?” I enquired.

“It is.”

“Chas here from the gun shop. You wanted to know where 110 rounds of .319 went?”

“I did.”

“Well – you’ve got it – it was handed in to West Midlands police at the time of the pistol ban!”

Total collapse at other end – to be fair he did thank me for being so quick in responding and as he said, the more ammo that could be eliminated the better.

I have mentioned the guvnor in past articles – he was (and is) a real gentleman but he could be a bit strait laced. Lunchtime on a quiet Monday and in comes a lady who was a good customer – we had helped her get her FAC for target shooting and sold her a Ruger 1022 .22.

On this occasion she had a friend with her – a very bubbly blonde lady with a very

infectious laugh. She wanted to look at CO2 pistols. She wanted to take up shooting but didn’t want the bother of an FAC. I was showing this lady a Beretta 92F when she enquired: “What’s it like?”

“Well,” says I, “It’s a good pistol but it might be a bit big in your hand.”

“As the bishop said to the actress!”

That was it – we were off!

Everything took on double meanings. Actresses and bishops all over the place. I never laughed so much in all my time in the gun room.

Three times the guvnor came out of the back office, looking in a slightly disapproving way over his specs.

When he heard me saying goodbye and the doorbell had clanged he came out again and made some remark about decorum in the gun room.

“Don’t knock it, guvnor,” says I, “just look at the top two card vouchers in the till!”

He did – just short of £600 between the two ladies. No more said. Until next time – keep the faith!

NOVEMBER 2014 19

WWW.WRIGHTSREGISTER.COM

Harness the sun to save cash says company

Save space with little slurry separator

SOLAR panel installer EvoEnergy says farmers yet to take full advantage of their Annual Investment Allowance (AIA) should consider renewables.

Six months after the Goverment announced it would be increasing the annual allowance for qualifying capital expenditure to £500,000, EvoEnergy is calling on agricultural firms to widen their approach and consider solar energy generation.

Businesses can benefit from immediate 100% tax relief until the end of 2015 on up to £500,000 spent on plant or machinery, including solar PV. For a farm owner paying 20% corporate tax, this acceleration means as much as £100,000 on large investments can be offset against tax in year one.

By choosing renewables, farmers can also benefit from the Government’s 20-year Feedin Tariff (FiT), which guarantees to pay a set rate for every unit of electricity generated.

EvoEnergy director of finance Steve Wilks said: “This enhanced tax break is a welcome move from the Government, but for many firms the biggest challenge is actually being able to make the most of it.

“The beauty of solar, especially when installed on a

BAUER has launched a new small-size screw press separator designed to help smaller dairy and pig farms manage and use farm slurry more effectively.

The Bauer Compact separates slurry into its liquid and solid fractions, which means it takes up less storage space.

The liquid bit can be pumped to a lagoon for application by a small mobile irrigator or by tanker, while the solid fraction can be stockpiled for application by a traditional spreader.

Typical output is around 5cu m per hour for cattle slurry and 7-10cu m for pig slurry.

Bauer UK and Ireland sales manager Adrian Tindall said: “We already have a comprehensive range of separators but the new Compact is a cost-effective option for dairy herds of up to 150 cows or so.

If you’ve got a big roof you might well also have a big opportunity to make some cash from solar power, according to EvoEnergy.

barn or shed roof, is that by putting previously dead space to good use, farmers can maximise their tax breaks, earn money on self-generated energy and cut their bills too.

“The greater a farm’s electricity usage, the higher the potential savings through solar.

Often businesses find that they can use 100% of their selfgenerated electricity on site while still also earning the FiT payment for this electricity.

“For example, a 250kWp solar system costing around £250,000 before AIA could return £20,000 each year in FiT income and a further £20,000 in energy savings if 100% of it is consumed on site.

“This represents a significant amount of money added back on to the bottom line and for a farm owner this improvement of EBITDA can enhance the long term valuation of the business.”

Craig Simpson, national head of corporate tax for Baker Tilly, said: “Many of the businesses we work for tell us that finding suitable investment opportunities to benefit fully from the AIA can be difficult.

“Renewables are one way for farms to do just that – allowing them to bring forward the tax benefits while enjoying the stability of returns over the long-term as well.”

For more details visit www.evoenergy.co.uk

This design image shows the Bauer Compact separator – a neat little machine for separating slurry to reduce the storage space it takes up.

“Slurry separation is an established technique that eases storage demands and makes better use of slurry as a resource, but it hasn’t been available to smaller farms; the new Compact changes that.”

The Bauer Compact separator is smaller and lighter than the established S655 for up to 400 cow herds and the S855 for herds with more than 400 cows.

Slurry is fed into the housing from one side and pushed to the front by the screw, which is driven at 19rpm by a 3kW electric motor through a reduction gearbox.

A continuous plug of fibrous material is formed at the end of the housing where weighted outlet flaps regulate the pressure.

These can be adjusted to balance output, the consistency of the incoming slurry and the dry matter content of the separated fibrous material, which typically will be between 20 and 28%.

Liquid is extracted through a choice of 0.25mm to 1mm slotted screens and drains via a pipe emerging from beneath the screw housing to a storage tank or to a sump from where it can be pumped to a ‘dirty water’ lagoon.

The solids fraction is normally stockpiled in a bunker beneath the separator.

The Compact weighs 420kg and measures 1.3m in length by 0.7m wide, standing 1m high.

“It costs less – around £10,000 compared with the higher output S655 and S855 at £17,000 to £23,000,” said Adrian.

“Pipes, fixtures and fittings and a control panel will only add around £3500, maybe more depending on the situation. So with the low running costs, there is potential for a quick payback from being able to utilise the nutrient and organic matter content of slurry more effectively than when it’s kept whole.”

20 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

Plant and machinery

The little Deeres have been given extra oomph A HUGE range of optional configurations are available on John Deere’s updated line-up of speciality tractors – the 5G Series.

There are four model ranges, the 5GF, 5GN, 5GV and 5GL featuring 3.2 and 4.5 litre Stage IIIA engines with a rated power of 75, 85 or 100hp.

The 5GF is for row widths of 2-3m or wider, the 5GV is for widths of 1.8-2.2m, the 5GN is narrower still and the 5GL is designed to be extra low where height is an issue.

A spokesman for John Deere said: “The 5GF, 5GV and 5GN Series tractors offer customers an open operator station or a redesigned wide cab for maximum visibility and operator comfort, plus a wide range of transmission, pto and hydraulic options, from entry level to premium alternatives.

“These include a two-wheel drive 12F/12R speed transmission up to a four-wheel drive 24F/12R PowerReverser transmission; a 540/540E pto or a 540/1000 pto including ground drive; and a twin pump hydraulic system with two mechanical SCVs or a triple

pump system with four electrohydraulic SCVs including seven mid-mounted couplers.

“The open centre hydraulic system provides ample power, supplying up to 122.5 litres/min hydraulic flow when equipped with three pumps. For extra comfort and convenience, a joystick provides fingertip control of implements when using the electro-hydraulic SCV option.”

The tractors’ three-point hitch has a maximum lift capacity of 2590kg as standard, or with additional lift cylinders this can be increased to 3100kg.

New push-button controls allow the hitch to be steered hydraulically from side to side, making it easier to operate rearmounted implements in confined spaces.

In addition, the operator can manually adjust the implement to keep it level to the ground,

It may be narrow but it’s no slouch – the John Deere 5GF can be specced up to 100hp.

particularly when working on slopes.

Completing the new John Deere line-up of speciality tractors for 2015, the lowprofile 5GL Series 75hp and 85hp four-wheel drive models feature an open operator station and a 24F/24R Sync Reverser mechanical hi-lo transmission, and are intended primarily for pergola-style vineyard plantations.

There are surely suitcases that are wider and more unwieldy than the super-thin 5GV.

Even narrower than the ‘F’ is John Deere’s 5GN.

If someone decided to hold a limbo dancing competition for tractors, the flattened-looking John Deere 5GL would surely be in with an excellent chance of victory.

‘Spooktacular’ harvester for pristine pumpkins IT CAME as no surprise when Cambridgeshire firm Herbert Engineering picked Halloween to publicise its Pumpkin Harvester and Washer.

The system has a throughput capacity of up to 10 tonnes per hour with six personnel, a tractor driver and box transfer driver.

The company press release states: “The smart pocket design of the elevator with rubber flights and integral side wall prevents crop damage, leaving it to Halloween revellers to make the pumpkins into gruesome lanterns.

“A three-pump water supply

system with jets removes surface soil and, combined with its eco water recirculation system, the rig takes the nightmare out of getting pumpkins into pristine condition for carving.

“After washing, pumpkins are manually graded into boxes on the rear of the system for despatch. The accumulation section on the back will accommodate all manner of sizes from small and scary to giant and ghastly.

“From a practicality point of view, the washer is a real treat (no tricks here!). The dewatering belt and feed elevator

are both driven by tractor pto giving variable flow rate.

The side platforms and elevator hydraulically fold up to within a trailer’s width for transportation and storage.”

Apparently, after the pumpkin season, other less spooky produce such as carrots, potatoes and parsnips can also be used on the rig.

To watch a video of the pumpkin harvester and washer in action visit http://youtu.be/Y1shNcLLH3g For details contact Herbert Engineering on 01945 430666 or visit www.rjherbert.co.uk

It’s close to midnight and something evil’s lurking in the dark. Under the moonlight you see a sight that almost stops your heart. You try to scream but terror takes the sound before you make it, and so on. Herbert Engineering’s Pumpkin Harvester and Washer makes a very useful part of the Halloween industry. Sadly the crew have failed to get into the seasonal spirit for this photo with nary a mask or plastic skeleton to be seen.

WWW.WRIGHTSREGISTER.COM

NOVEMBER 2014 21

Only 79p an issue when you subscribe – see page 19 Continued from page 1

Plant dealership throws open its doors to mark a decade of trade TEN years of trading farm equipment was celebrated when dealer Border Plant Sales staged its first ever open day.

The event also marked the official opening of a new parts department and shop area at the firm’s premises in Smallwood, between Congleton and Sandbach in Cheshire.

The new features will enable Stephen Lowe, who runs the company, and his colleagues to provide an improved service to local farmers.

“We moved the workshops to improve that facility about 18 months ago and now we’ve invested in the new parts shop, which includes a showroom area for displaying tractors,” said Stephen.

“Farmers like to buy things like filters, batteries, tools, lights and fuses, that sort of thing, from just down the road – and now we can supply a bigger range of items in a pleasant environment.”

Probably the last time it’ll be quite so squeaky clean – the new flagship John Deere 9620R in the studio.

More absolute power

A winning team. Pictured from left are workshop technician Lee McNamara, Stephen Lowe, Jane Lowe and George Bottomley at the Border Plant Sales open day.

New Landini 6C and 6L tractors on display at Border Plant’s revamped premises at Smallwood between Congleton and Sandbach in Cheshire.

The new showroom area is big enough to display tractors – such as the three refurbished classics that occupied the space during the open day. Outside, a line-up of Landini tractors highlighted the new models and technological improvements currently being introduced to the range.

“The Landini products are going through a major upgrade with new models of a type we’ve not had before incorporating new features for improved efficiency and a better driving experience,” said Phil Maw, Landini area sales manager.

The line-up at Border Plant included the new 90-107hp

Women offered cash to help with training in their field FUNDING for technical and management training is being offered to women who want to get involved in agriculture.

Lantra, the sector skills council for the land-based and environmental industries, is bringing back its successful Women and Work programme.

After a four-year hiatus, Women and Work is again offering funding for training in a range of areas including supervisory management, health and safety, machinery operations, administration and first aid.

The scheme is intended to empower and motivate women to progress their careers and help them develop their skills, knowledge and confidence.

Women of any age can apply for funding as long as they are employed, a volunteer, undertaking an apprenticeship/traineeship or in the process of changing careers.

Training should result in demonstrable career progression, such as the acquisition of skills, obtaining a higher level job, gaining transferable skills or gaining a technical award/qualification.

Among the women who benefited when the scheme was launched in 2010 was farmer Victoria Forsyth.

She said: “I couldn’t afford the cost of training but I needed it for hedge-cutting work as a contractor for a local council.

“Women and Work enabled me to embark on the course and I gained new skills including lining up to tractors, checking with compatibility, pre-checks on the tractor and trailer and muck spreading.”

Environmental conservation volunteer Katie Nicholson, who also benefited, said: “Thanks to Lantra’s Women and Work programme I got on a course at college. I’ve learned how to fell and process trees and I’ll be having my assessment in a few weeks’ time. What has been good about the course, alongside volunteering, is the enormous amount of practical experience I’m getting.”

For further information, including details of eligibility and the application process, contact 02476 696 996 ext. 209 or lantra.business@lantra.co.uk

Felling and processing trees was part of the training Katie Nicholson received with the aid of Lantra funding.

Farmer Victoria Forsyth was able to get funding to help with her training through Lantra.

4 Series stockman’s tractor, multiple spec choice 111-131hp 6C Series and a four-cylinder replacement for the popular Landpower in the shape of the 143-176hp Landini 6L Series.

Stephen Lowe said: “The new tractors got a lot of attention; people don’t always realise what a comprehensive range is offered by Landini and how well equipped they are. In our experience over the past three years as a Landini dealer, we’ve also found them to be very reliable.”

As for staging his first open day, he promised it would not be the last: “I’m delighted that we had a lot of people come who aren’t existing customers, often travelling quite a distance,” he said.

“It took a lot of preparation but with good support from our suppliers, including Dieci, Shelbourne Reynolds, Walter Watson, IAE, Major Equipment, Tama UAT and Dalecrete, as well as Landini and Granit, it was worth the effort, so I think we’ll have to do it again next year.”

JD’s e18 PowerShift transmission has been tweaked to be more efficient and hydraulic flow is up to 435 litres/minute.

The 9520R, 9570R and 9620R models all get new HydraCushion suspension too.

Located on the front axle, this is intended to eliminate ‘power hop’ and put more of the tractor’s power on to the ground.

The new CommandView III cab has a redesigned CommandARM featuring a John Deere 4600 CommandCentre display, from which all of the tractor’s functions and settings can be controlled. Another novel feature is the driver’s seat, which can now swivel 40

degrees to reduce strain when viewing rear implements.

All the tractors come with a new LED lighting package for work illumination at night.

Active Command Steering is available as an option to provide improved steering at high transport speeds and reduces steering effort in the field.

The new John Deere 9R/9RT Series tractors are also available ex-factory with John Deere’s FarmSight remote monitoring technology, along with dealer services and support. These include AutoTrac automatic steering, JDLink telematics, iTEC Pro headland management, Isobus and new remote display access and wireless data transfer options.

On the right track... and the left. John Deere’s new 9570RT is a real brute.

PELL P E L L PLANT P L A N T HIRE H I R E LTD LT D

Groundworks & Construction, Civil Engineering Contractors t. 01754 881231 m . 07768 9 43722

Lym d a le Cro ftLa ne, Cro ft, Sk egnes s , Linc s PE2 4 4 PF

A . G ric e & S on (a d ivis io n o f Pell Pla ntHire Ltd )

•L a n d d ra in a ge •Je ttin g •Ditc h m a in te n a n c e •L a ke s & P on d s ESTABLISHED O VER 50 YEARS AN Y REG IO N C O N SIDERED

Land D rainage Sp ec ialists

22 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

News

Farmer says it’s time to breed for hornlessness DAIRY and beef producers could be saving hours of their time and improving the performance of their calves by taking one simple step when making breeding decisions according to one dairy farmer.

Molly Westwood says dehorning calves has a far higher cost than many people realise and can be more easily avoided today than even a decade ago.

It is an issue which Molly, a highly successful breeder, feels strongly about and she aims to reduce the number of calves being disbudded on her family’s Exmoor farm.

Molly also works for start-up cattle breeding company Mastergen.

“Many of our bulls come from continental Europe where there’s a strong and growing movement against the dehorning process,” she said.

“As farmers, we know that having cattle on the farm without horns is absolutely necessary for animal and worker safety. We also know

there’s a far better way of achieving the hornless state than disbudding calves or worse still dehorning older cattle.”

She added that the gene for polled cattle was dominant over that for horned, which meant that just one polled gene needed to be carried for the animal not to have horns.

“This makes breeding for hornlessness easier than many would realise. The progeny of homozygous bulls with two copies of the polled gene will all be hornless, while 50% of the progeny of heterozygous bulls carrying just one copy of the polled gene will also be born without horns.

“Achieving hornlessness this way is far preferable to dehorning the calf, which has a considerable cost involved.

But there is potentially far more cost than just in the dehorning process, including the check in growth which occurs after dehorning.

“We all know that any stress event will compromise an animal’s immune system, so

Look – no horns. Niffer P, part of the Mastergen stud, is a jet black genomic bull without horns.

Inspirational Milly takes the gong VOTERS across the country chose Royal Agricultural Benevolent Institution (RABI) East Midlands regional manager Milly Wastie for an Inspirational Woman award.

She received it at a ceremony in Cadogen Hall, Chelsea.

Milly, based at Yelvertoft, Northamptonshire, lives with her partner Andrew who farms on the family farm of beef, sheep and arable.

She was given the award, based on a public vote, for her commitment to the charity sector and her work promoting British Agriculture and championing road safety.

The Inspiration Award for Women is run by, and raises money for, the Breakthrough Breast Cancer charity.

Milly said: “I jokingly said in my acceptance speech that it was nice to get glammed up for the night instead of my usual wellington boots and overalls.

Cattle breeder Molly Westwood says making the right breeding decisions can take away the hassle and expense of dehorning.

there’s also the possibility that calves will be more prone to infection.”

Today there is also pressure from animal welfare groups, which are becoming increasingly intolerant of removing horns from cattle by any technique.

“These pressure groups exert a particularly strong influence in parts of continental Europe, and in Germany in particular have influenced the cattle breeding programmes for many years,” said Molly.

With much of the Mastergen product originating in Germany, some of the top polled genetics in the world are now available to UK farmers, she added.

“There used to be a time when compromises had to be made when choosing polled genetics, but now things have moved on so far that some of the best performing bloodlines in the world carry the polled gene.”

A variety of polled beef sires are available at Mastergen.

For more information call 01823 430317.

Trio of guns stolen from farmer

The people’s choice – Milly Wastie of the RABI has scooped an Inspirational Woman award.

Voters had to fill in an online form, which required them to cast a vote in every category of the awards – including the Little Mistress ‘next generation’ category, which was won by Frankie Bridge of pop group The Saturdays.

“This award means so much to me as it recognises the voluntary and campaign work I have done for many years and endorses what I do to really try to make a difference and hopefully inspire others,” she added.

A BOLT-action rifle and two shotguns have been stolen from a farm premises in Lincolnshire.

The guns were taken from the property in Heapham, near Gainsborough, on Friday, October 31, between 6.30pm and 8pm, after two gun cabinets were ripped off a wall.

They were a .22/250 Sako rifle ID number 037531, a .410 El Chimbo single barrel shotgun ID 80603 and a 12 bore side-by-side shotgun ID 25921.

The firearms were legally held and no ammunition was taken.

Police have issued an appeal for information to track them down.

Contact Lincolnshire Police on 101 quoting incident 255 of October 31, 2014, or call Crimestoppers anonymously on 0800 555111.

Machinery importer forges links with Polish giant A CONTRACT to sell a Polish range of cultivation, spreading and seeding equipment has been awarded to East Yorkshire firm Manterra.

The company, based in Market Weighton, is now the sole UK importer for Unia Group.

Manterra founder Andrew Manfield said: “I had been looking for a manufacturer of high-quality, low-cost cultivation, spreading and seeding equipment for clients with a tight budget and Unia Group has exceeded my expectations.

“In terms of value for money, it is unbeaten.

Although relatively unknown

in the UK, it has an excellent 132-year pedigree and I expect won’t remain unknown for very long.”

Manterra will be showing Unia Group’s ‘XXL’ ploughs, Kos semi-mounted stubble cultivators, Ares discs and Max tined cultivators at the LAMMA 2015 in January.

Manterra was established by farmer and agronomist Andrew in 2011 and has its foundations in a farming business that was established at the beginning of the last century.

It is also the technology supplier to the Stockbridge Technology Centre SATS4CROPS project that has

Just one of many machines that will soon be available in the UK from Unia Group via Manterra.

secured Innovate UK funding for a three-year trial to commercialise innovative precision farming technology.

Founded in 1882, Unia Group employs 1350 people at its four manufacturing sites in Poland and France and exports to more than 60 countries. It produces 25,000 machines per annum.

Delayed rail project will blight farmers, says NFU A DECISION to carry out further work on the final route of HS2 Phase 2 high speed rail project has been met with frustration from the NFU. The union claims further postponements will cause uncertainty and blight for the farmers affected.

It is now likely that the decision will be made after the election in May next year.

Further announcements made in HS2’s Rebalancing Britain

report launch reaffirmed plans for the south to north route and introduced further proposals for an east to west route dubbed HS3.

NFU president Meurig Raymond said: “Farm businesses surrounding the HS2 route are set to be compromised and the delayed decisions will mean the people who are set to have their farmland severed by HS2 are left in the dark.

“Farmers affected must be

consulted and informed so they can make the right decisions for their business in the run-up to and during this huge impact on their land and lives. A binding and comprehensive duty of care must be established.”

The NFU has been lobbying government to ensure farmers affected on the ground can continue to run viable farming businesses and be treated fairly during the process and compensated appropriately.

Let them eat cake, says farming charity A FARMING charity got a slice of the cake when organisers channelled their inner Mary Berry at a cream tea event at Casterne Hall, near Ilam.

Committee members of the Royal Agricultural Benevolent Institution (RABI) laid on a spread of home-made cakes and scones for the event – which took place in September – with the proceeds all going to help the charity’s work in providing welfare grants for farming people in financial difficulty.

Charles and Caroline Hurt, whose family have owned the house for over 250 years, also gave guests the opportunity to explore the house and gardens made famous by appearances in films such as Jane Eyre and Far from the Madding Crowd.

Derbyshire RABI committee chairman Angela Sargent said: “We’re very thankful to everyone who came along and supported our cream tea and also to our wonderful hosts and sponsors for making the event happen.”

The cream tea was sponsored by Prescient

Ready to serve hungry visitors are Derbyshire RABI committee members Kate Wainwright, Angela Sargent, Margaret Baile, Jean Dilks and Sarah Booth.

Power and through the sale of Christmas cards and tombola tickets raised £750 for RABI. The committee’s next event is a second-hand Joules clothing sale on Tuesday, October 14, at Sparrowpit village hall near Buxton.

To find out more visit www.rabi.org.uk or call RABI’s confidential helpline on 0300 303 7373.

Packhouse equipment firm goes global ENGINEERING company Tong Peal has sold a range of new packhouse equipment to one of Tasmania’s largest agricultural firms, Field Fresh Tasmania.

Field Fresh, part of one of Australia’s oldest agricultural companies, Webster, produces onions for export to Europe, Asia and Australia.

In late 2013, the company decided to upgrade its machinery and invest in new equipment.

Tong Peal Engineering is now providing a number of coil cleaners and a series of Easy Grade screen sizers, combined to form a

The Tong Peal equipment in situ at Field Fresh Tasmania’s production facility.

complete onion grading system.

Tong Peal manufactured three coil cleaners at the infeed to the system prior to new onion topping equipment. Onions are fed on to two rows of eight EasyGrade screen sizing modules with common grade conveyors, allowing high throughput and nine different grades of onions.

The two rows of Tong Peal’s EasyGrade screen modules, totalling 16 units, is one of the largest orders for EasyGrade screen modules within one system supplied by Tong Peal.

The screens were manufactured to a bespoke order for Field Fresh Tasmania, which visited the site in Spilsby during production. The order was then shipped from Spilsby in Lincolnshire to Devonport in Tasmania and installed in early January, just in time for harvest.

Barry Hughes, Field Fresh Tasmania’s engineering manager, said: “It is of paramount importance that the journey of the onion from field to kitchen is as smooth as possible, with a focus on gentle handling. Tong Peal’s handling lines have enabled us to increase production while taking great care of our product.”

For more information about Tong Peal visit www.tongpeal.com or call 01790 752771.

WWW.WRIGHTSREGISTER.COM

NOVEMBER 2014 23

24 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

ATV

BUILDINGS

BUILDINGS

BUILDINGS

WWW.WRIGHTSREGISTER.COM

ROOFING & CLADDING SHEETS PLASTISOL - POLYESTER INSULATION - PURLINS METRE COVER “ONDULINE STOCKISTS”

DIRECT FROM THE MANUFACTURER

Unit 6, Capelhendre Ind. Estate, Nr. Ammanford, Dyfed SA18 3SJ

Telephone: 01269 831869 Fax: 01269 831870

NOVEMBER 2014 25

•B AR N S R E-CLAD •STEEL CLAD D IN G SUPPLIED Box Profile Straight C orrugated Straight & C urved

Tel.01366 382294 Fax 01366 382878 Eastern C ounties H um ber to the Tham es

B U S S EN S & VIGR AS S

26 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

BUILDINGS

B. POPE & Sons Ltd. Cattle Buildings Grain Stores Potato Stores G.P. Buildings

STEEL FRAMED BUILDINGS AND CLADDING

Workshops Industrial Units Extensions Refurbishment & Alterations

Design, Fabrication, Erection, Cladding or Supply Only

GENERATORS

MAX LAST CONTAINERS CONTAINERS FOR SALE OR HIRE

Church Farm Yard Sempringham Sleaford Lincolnshire NG34 0LU Tel/Fax 01529 241493 - website : www.bpopeandsons.co.uk - email : sales@bpopeandsons.co.uk

new and secondhand

CONTRACTORS ALL SIZES OF SHIPPING STORAGE AND REFRIGERATED CONTAINERS Tel: 01394 387728 Fax: 01394 388826 Mobile: 07860 413994

user@woodbridge41.fsnet.co.uk Nationwide Service

LIVESTOCK GENERATORS

LIVESTOCK

MOORE’S YARD, HEMINGBY LANE, HORNCASTLE, LINCS LN9 5PN

• BULK FEED BINS • • PIG & POULTRY FEED SYSTEMS • • DRINKER SYSTEMS • Contact:

K. BARK 07957 568 954, R. MOORE 07957 568 955 TEL: 01507 522386 FAX: 01507 522061

www.valelivestock.co.uk

LIVESTOCK

LIVESTOCK

NOVEMBER 2014 27

WWW.WRIGHTSREGISTER.COM

LIVESTOCK

MACHINERY FOR SALE

BRO W N S O F LI VERS E DG E FOR

NEW & S/H BELARUS TRACTORS

spare parts also available

Tel: 01924 404534

C LUTCHES

CLUTCHES

and m ore CLUTCHES Also FLY W

HEELS

Allm akes-TRACTORS,

COM BINES and TRUCK S

01724 855711 w w w .clutchnet.co.uk w w w .clutch-m anufacturer.co.uk

MACHINERY FOR SALE

28 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

MACHINERY FOR SALE

View the broker service online at www.wrightsregister.com

WWW.WRIGHTSREGISTER.COM

NOVEMBER 2014 29

30 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

MACHINERY FOR SALE

NOVEMBER 2014 31

WWW.WRIGHTSREGISTER.COM

MACHINERY FOR SALE

SERVICES

SERVICES

COMPRESSORS For new and reconditioned air compressors and associated equipment contact the experts

T.A. INDUSTRIES 01427 668436

SERVICES

WANTED

32 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

SPRAYERS & SPREADERS

SERVICES

TRAILERS

TYRES

WWW.WRIGHTSREGISTER.COM

NOVEMBER 2014 33

34 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

1

AUGERS

S7243 RECO 35 Ft Transmatic 6” Auger on wheels. c\w 3 phase motor Very Good condition £850 % Shaun 07850 978188 S7240 TROUGH Auger 14 “ Across, 25ft long c\w End drive motor, small fill reception.

Frame with castor wheels. Good condition % Shaun 07850 978188 S7184 RECO 20ft Straight auger c\w 3 phase motor Good condition % Shaun 07850 978188 S6605 RECO Recomatic 6” Transmatic auger appx 28ft long c\w 3 phase motor & armered cable. Has Double castor wheels each side to move. Kept inside Good condition £500 % Shaun 07850 978188 S7183 RECO 40ft Transmatic 6” auger.

Mounted in A frame c\w wheels and small reception hopper. Recent Repairs so very sound Very Good condition £900 % Shaun 07850 978188 C6965 BRICE BAKER Transmatic trolley auger, 8” diameter all galvanised 43 ft long, large receiving hopper with set castor wheels below, pneumatic rubber tyres on triangular main frame, winch wire height adjustment, flexi pipe discharge attachment, drawbar, 15hp 3 phase electric motor drive, some wear on lower auger section but high capacity machine Good condition £1,395 % Chris C 01926 338639 C7124 BRICE BAKER 8” Transmatic trolley auger 33’ long, bright galvanised construction with manual winch wire for height control, 11kw 3 phase electric motor drive with modern starter & cable, rubber tyres, bottom receiving hopper with castor wheels below assists movement, flexi pipe discharge, lives indoors Very Good condition £1,400 % Chris C 01926 338639 S7117 34 Ft 4.5” Transmatic auger c\w 3 phase motor and cleaning section in First part. 2 small wheels. Good condition £450 % Shaun 07850 978188 S7028 BRICE BAKER 20ft Transmatic 4” Flight fitted with cleaner mesh on Upper tube. 3 Phase motor, winch up & down and 2 Wheels. Good condition £375 % Shaun 07850 978188 S7211 IDEAL MAYRATH Galvanised Transmatic 6” auger appx 35FT long c\w 2 wheeled carriage & motor Good condition % Shaun 07850 978188 S7182 RECO 27ft Straight Auger Fitted 4 HP motor & Adjustable height wheels to Unload corn bins. Recent New flight Very Good condition £400 % Shaun 07850 978188

2

BALERS AND BALE HANDLING

S7034 BAMFORD BL 59 Conventional Square baler c\w 5ft Pick up. Good tyres, All staright but average paint (no rot) plus bale sledge Average condition £350 % Shaun 07850 978188 C7054 MCHALE 991B trailed bale wrapper, 1998 model in full working order, turntable type with 4 belts & twin bobbin rollers, 750mm plastic wrap spool with cutter system, hydraulic operated bale side arm to lift bales in field or yard, rear bale discharge fall mat on frame with hydraulic ram actuated lowering mechanism, manual spool valve block (could convert to tractor spool operation), wide tyres, ring hitch. Fully working unit on small farm used 2013 season with round bales Good condition £3,400 % Chris C 01926 338639 F3665 NEW HOLLAND

D1010 Silage 1994 Big square baler. 80x90 bale chamber with variable length. Done 94000 bales. Free running pick up reel with a full set of tines. Good knotters. Good condition £6,500 % 07503 531889 S6208 WELGAR RP150 5ft by 4ft Belted round baler c\w mechanical twine tying. Fittted Road lights. Stored inside. Average condition £950 % Shaun 07850 978188 F3512 WELGER AP630 Serial Number: 1135-04-5199. Mid 1990’s.

In working order and will go straight to work.

Has been barn stored and the paint is generally good for its age. Baled an average of approx 7000 bales per year for the last 10 years. Operators manual and parts list for the baler. Very Good condition £5,000 % 07503 531889 S7219 2001 MF 185 80 by 90 / 3 by 3 Baler , well maintained and sensibly used in good order c\w Bale ejector rollers, Brakes & lights.

215L 15/16 tyres (one new) Good condition POA % Shaun 07850 978188 C6864 BROWNS Tipper big bale accumulator for operation behind big square bale to deposit 2 or 3 bales together on tilting bed, currently fitted to New Holland BB940 (800 x 900 bale) & used for 2 bales, pair pivoting castor wheels below fitted 7.50-10 tyres, hydraulic operation from tractor with in-cab control box. Baler drawbar/brackets & pipework complete, all straight in working order last used 2011 Good condition £1,150 % Chris C 01926 338639 C6968 JOHN DEERE 582 Round baler 2002 model with crop cutter system & cover edge wrap facility, 2m wide pick-up with wheels & adjustable wind guard, 540 pto drive & wide angle shaft, net & string wrap with additional net spool carrier at front. Top specification machine including 19.0/45-17 wide tyres, Bale Track Plus in-cab monitor for adjustment on the move of bale diam, net wrap turns, cutter knives in or out, reverse rotor, bale density etc. 6 x textured bale forming belts, rear bale kicker, hyd pick-up lift, road lights & rear work lights, instruction book. Baler is in stunning straight original & clean condition, fully guarded with chopper filler plates and all bright unmarked paintwork - a credit to its owners. Excellent condition poa % Chris C 01926 338639 S6993 WELGAR RP 435 Variable diameter Round baler (3 - 5ft 6” By 4ft) 2.1m Pick up with Rotofeed , Side feed augers & chopper.

Nett Wrap & Bale Ejector. Good Example of this market leader. Very Good condition £13,500 % Shaun 07850 978188 S7241 MEIJER Flat 8 Bale Grab with Bolt on loader brackets plus Meijer Flat 8 sledge with baler drawbar Good condition £500 % Shaun 07850 978188 F3560 NEW HOLLAND 654 Round Bailer 1998. Done little work and stored undercover.

3’ - 6’ bale sizes, variable pressure. Straight to work for a well maintained machine. Very Good condition £5,000 % 07503 531889 F3513 MCCONNEL Bale Packer Mcconnel bale packer makes packs of 16 or 20 convential bales, trailed unit with drawbar and chute system, to fit behind convential baler, used in 2012 season. Cherry Products Bale Gripper included! Very Good condition £8,000 % 07503 531889

NOVEMBER 2014 35

• See also the wanted section and read the buying/selling details before calling

WWW.WRIGHTSREGISTER.COM S7360 NEW HOLLAND

D1000 0.6M By 0.9M Chamber Baler with 2.0m pick up fitted 6 tine bars and 125/75 r8 wheels at ends. 4 Twine Knotters with electric performance monitors (One needs repair). 16/70 R 20 tyres 90%. Hydraulic bale density. Tidy farmers baler. Good condition £2,750 % Shaun 07850 978188 S7239 TENPACK S Bale Transporter Trailer / stacker picks up 120 small bales in Flat 10s.

Fitted Hydraulic and air brakes. 4 Spool valve to operate. Twin 12 ply 7.50 -16 Tyres. Average condition % Shaun 07850 978188 C7135 ALBUTT Bale Spike to fit loader/telescopic, 3 spike type fitted twin tines (short & long each end) on box section frame 62” wide & 26” high. 2001 model with Matbro ‘horn’ brackets welded on Good condition £300 % Chris C 01926 338639 S7244 Flat 8 Grab Sturdy double action, Single acting ram push in Sprung back out toothed grab. Sanderson Kwiki Brackets Good condition £350 % Shaun 07850 978188 S7100 0190 MF 2170 120 by 90 Big Baler Ist used July 2011 and only baled 16200 bales. Fitted 2.25m pick up with end wheels, Knotter blowers and 700/50 - 22.5 tyres . Immaculate Unmarked Baler Excellent condition £53,000 % Shaun 07850 978188 F3548 BROWNS Mini heston bale pick up.

Maximum bale size 2.0m. Quick hitch to fit JCB £500 % 07503 531889 C7055 WELGER RP200 Mastercut round baler, 1996 model with net wrap, 1.9m wide front pick-up reel (requires some tines) fitted rubber support wheels & side augers to cutter cylinder, 540 pto drive, chain lube system, fluted steel roller bale formers, all straight guards & panelwork, large screw jack, 15.00/55-17 good wide tyres. In cab control box for variable bale size/net wrap turns etc..

Used 2013 on small farm Good condition £3,600 % Chris C 01926 338639 C7003 ELEVATOR Suit small bales, strong box section framework with Colman spiked chain conveyor system powered by single phase electric motor, 28’ long, winch wire height adjustment from rubber tyred chassis, galvanised top chute with end roller assists bales to exit correctly Good condition £525 % Chris C 01926 338639 F3647 BROWNS

Flat-eight bale grab with JCB quick hitch brackets.. Straight frame no bends or welds.

Full set of straight teeth. New hydraulic pipes Average condition £500 % 07503 531889 F3667 CHILTERN Round bale grab. Fits onto pinning cone/ Matbro attachment. Can be used on 4”6’ bales Good condition £550 % 07503 531889 S7242 136 Bale Stacker carier. Mounts on 3 point link arms with 11.5/80 - 15.3 tyres on sides. Back into the heap of Flat 8s and its squeezes them in Good condition % Shaun 07850 978188 C7110 BROWNS Super Buzzard 3 bale grab suitable for big square bales, will handle 3 x 800 Quadrant size bales or 2 x 1200 size Quadrants etc. Twin ram operation for split section of curved tines in frame, total 8 rows tines on 5 bars with large side bar for bale guiding, good orange paintwork & Merlo fittings on backframe Good condition £1,525 % Chris C 01926 338639 S7104 1996 HESSTON 4900 Big Square baler. 2m pick up, 28 -26L tyres, Half tailgate ejector. Cleaned down and waxoiled inside.

Under 80,000 bales. Very Good condition £11,000 % Shaun 07850 978188

3

BEET HARVESTING EQUIPMENT

S6931 CTM Super 120 Cleaner Loader with continenttal Main web & Rod link Cleaning web. 4 Wheel chassis with 11.5/80 - 15.3 tyres. 3 Cylinder electric start diesel engine.

Good condition £1,250 % Shaun 07850 978188 F3637 STANDEN Vintage 2 row beet lifter.

2 pairs of discs and lifting shares. Would suit small area of fodder beet. Free bearings on discs. Solid frame needs paint. Photographs available. Average condition £300 o.n.o. % 07503 531889 S7346 1986 STANDEN Rapide Mk 3 Tanker Single Row Beet Lifter with Fold round tank and Share lifters. Feeler wheel & knife topping. 11R 16 Tyres. Good condition £800 % Shaun 07850 978188 S7314 ARMER SALMON Belt Lifter Single Belt lifting Tanker beet harvester. 1 recent belt Good condition % Shaun 07850 978188

4

BUILDINGS/ STORES

C6798 CRITAL Steel galvanised panels ex indoor grain silos, square profile type all taken down ready to transport. 3 metre (9’10”) long panels x 10 & 2.4m long panels x 16 complete with starter & finisher panels.

Includes some corner posts (main panels provide 40” depth bolt to bolt) Good condition £650 % Chris C 01926 338639 S7362 Portable Office In 2 Halves to transport each 32 Ft long, 12 ft 2” wide and 8ft plus tall. Door each side and some windows.

Reasonable order Average condition £1,200 % Shaun 07850 978188 C6969 DIVIDING WALL Steelwork & runners etc. to provide a sectional structure 20’ long & approx 11’ high for use in making a temporary divider to a conference/training/exhibition hall/ farm shop room. Each section 4’ wide & concertina into frame for storage with top track system, requires panel sections to be attached to steelwork. Taken down ready to move. Good condition £475 % Chris C 01926 338639 S3751 MOBILE Homes Various types available either 12 or 10 ft wide.Generally 22ft or 28ft long suitable for accomodation or office.

Prices according to age. Even some late models if required % Shaun 07850 978188 S7365 SPEEDCRETE Hexroller Cattle Flooring Concrete Imprint Roller (0.9m by 0.25m) which imprint hexagonal patterns onto the freshly poured concrete to make it slip-resistant thus providing grip in all directions. Used For One Job now surplus Very Good condition £700 % Shaun 07850 978188

C6970 RAILWAY SLEEPERS Timber traditional all well preserved standard size type 8’6” long 10” wide x 5” thick, quantity 50 preferably sold as one lot. Also set 3 plastic Omnium waste bins on caster wheels, believed to be 1100 lite capacity in yellow with fully opening lids - require waste lorry mechanism to tip/empty - these priced at £145 for lot of 3. Sleepers price below Good condition £650 % Chris C 01926 338639 F3551 VARIOUS Steel portal frame building heavy duty blast proof construction.

4.4x18m dimension. (5x3.6m bays) Height of uprights 4m. Also circular corrugated steel grain store 60t wheat capacity with drying floor and emptying auger. Good condition p.o.a. % 07503 531889

5

COMBINE HARVESTERS & EQUIP

F3654 FMC GB2700 1985 FMC Green Bean Harvester converted to harvest parsley.

Duetz 6cyl aircooled 160Hp engine. Hydrostatic drive. Stripper header and elevators.

Airconditioned cab. Tyres; Trelleborg Twins 414 600/60-38. All in good working order & would suit breaking/dismantling for engine and parts.Buyer to remove entirely. Average condition £2,200 o.n.o. % 07503 531889 F3623 1979 CLAAS Dominator 85 13’ cut header on trolly. 6 Cylinder Perkins engine. 5 Straw walkers & straw chopper. New straw beater and many bearings across the machine. Mechanical drive and grainloss monitor. Straight reel with new finger bushes. 3874 recorded hours. Good cab with water cooled system.Comes with electric side knife and full set of lifters. Good condition £6,699 % 07503 531889 S7228 1989 NEW HOLLAND TX 36 20ft Combine, 30.5 - 32 tyres, Straw Chopper, Fixed grain shoe appx 3500 Hours. Quick sale required Good condition £15,000 % Shaun 07850 978188 C7134 JOHN DEERE 2056 Combine Harvester, 1995 model with 2561 cylinder & 3196 engine hours, 205 horsepower, hydro transmission, 24.5-32 & 16.5/85-24 chevron tread tyres, 5 straw walkers with chopper, all straight panels plus unload auger, steel grain tank lids, good paintwork, recent new bearings on walker hood cross shaker. 816 header on trailer 16’ wide with big diameter auger, wobble box knife drive, good floor skids & tidy panel/paintwork. Zurn mechanical drive 1.35m sideknife to fit header Very Good condition £23,950 % Chris C 01926 338639 S7250 CLAAS Side Knife 1.2m To Fit Claas combine. Recent new 12v motor Good condition £400 % Shaun 07850 978188 C7099 MASSEY FERGUSON 40 RS Autolevel combine harvester, 1994 model fully serviced including header for 2013 harvest & not used 2013/14 (but regularly run up). 6 straw walker machine with Rekord straw chopper & 800/65R32 all good drive tyres, 600/50-22 steering tyres, aircon cab (R134a gas) with Datavision screen controller & rear view camera, hydro transmission, Valmet 612 engine with new hydraulic pump & recent fuel injectors, Powerflow 20’ header on trailer with ear lifters & dividers, all good belts, reel, guards & lower skid plates. Good quantity of spares included.

This is a very straight & spotlessly clean combine with full service records last used on small acreage - a rare find. Engine hours under 3000 (cylinder plus engine hours to be advised) Very Good condition £21,950 % Chris C 01926 338639 S7308 1985 MF 865 Combine c\w 18FT Powerflow table with bed trolley. Only done 2300 hours by 3 owners. Straw chopper and steel tank covers. Kept under cover Good condition £4,500 % Shaun 07850 978188

6

COMMERCIAL VEHICLES & EQUIP

S7364 VOLVO BM 861 6 wheeler Self propelled Dumper. (4 wd) 20.5 - 25 tyres in mixed condition, 2 damaged. 4 Speed transmision. Fair cab Air brakes fitted but not working. 6 cylinder naturally aspirated Volvo deisel engine. Average condition £4,500 % Shaun 07850 978188 S7085 TOYOTA Hi Lux Hardtop Fits Pickup body of Double cab models 2005 onwards.

Has Roof rails in ventilation openind side windows. Finished in silver. Good condition £600 % Shaun 07850 978188 S7353 NISSAN Terrano 3.0 SWB Deisel in Black with alloy wheels fitted Good 235/65 R17 tyres. Fitted Tow bar will pull up to 3000 kgs but hardly used. 2 seater commercial only done 50944 miles Tested till April 2005 Very Good condition £4,800 Plus VAT % Shaun 07850 978188 C7095 ARTIC Twin Axle Crane Freuhauf 42’ box unit with steel 24 volt operated rear full loading ramp system, 1989 model little used on road as office for environmental company.

All white grp interior & signwritten exterior, hardwood floor, internal fittings of shelves, brackets, lights etc. including electric winch with cable. Air suspension & brakes (new air bag & brake chamber fitted one side), all very good 265/70R19.5 tyres on twin wheels, chequer plate ramp covering, long step frame above fifth wheel coupling with landing legs, rated at 34 tonne gross, size 2.5m wide & 9’6” internal height. Ideal for competitive car transport, classic tractors etc. as can have workshop facility/living area at front Good condition £2,575 % Chris C 01926 338639

7

CRAWLERS & EQUIPMENT

S7377 TRACK MARSHALL Front Weight Cast Iron 1 piece weight for Track Marshall 135 Crawlers. Good condition % Shaun 07850 978188

8

S7300 FLEXICOIL 1.75m Front Press Single mounted coil press with a little steerage via pivot arm. Includes Hydraulic lift frame to fit Ford 40 series tractors Good condition £500 % Shaun 07850 978188 C7139 SIMBA Pigtail tines, 1” square section, quantity 16 ex Freeflow drill/Toptilth can be used in other applications Very Good condition £180 % Chris C 01926 338639 S7332 KONGSKILDE SP 5000 Germinator Trailed Hydraulic Folding 5m Cultivator. Fitted Erradicatng springtines (6) B (Barrell) Roller Crumblers, 5 rows on manually height adjustable Springtines, B Roller & R - Roller Crumblers 10/75 - 15.3 tyres. Good condition £3,500 % Shaun 07850 978188 F3568 LELY 3m crumble roller from Lely Roterra. In good condition bearing shafts are unmarked. Good condition £150 % 07503 531889 F3567 COUSINS 3m Dutch Harrow. Leveling board, 4 rows if tines & crumble roller. Plenty of metal left on tines, good bearings. Needs painting.

Good condition £250 % 07503 531889 F3602 4m wide sub soiler. 5 Leg comes with crumble roller and depth wheels. Average condition £3,200 % 07503 531889 S7299 JONES HD 4.5M Hydraulic Folding Pigtail tine cultivator. Built from 5” Box Section, Folds to 2.8m . Fitted Following harrow. Also 3.5m 4 bar springtine in good order Good condition £700 % Shaun 07850 978188 F3612 COUSINS Chisel plough; 7 legs over three rows on an 8’ frame. Solid steel depth wheels Average condition £1,000 % 07503 531889 C7092 CAMBRIDGE Rolls trailed 6.4m wide triple set made by Jones Engineering, hydraulic folding vertical type with 22” diameter ring cleats, 3 gangs with central ram & chain lift, lock bar, ring hitch, 10.00/75-15 good tyres on rear carriage, yellow paintwork, replacement gang bearing housing just fitted. Good condition £2,695 % Chris C 01926 338639 S7366 1997 SIMBA Toptilth 4M Cultivator with Rows of Pigtail tines (37) and 2 400mm Packers rollers with good scrapers.

Rigid model with good 10/75 - 15.3 Transport tyres at back Good condition £2,750 % Shaun 07850 978188 C7115 MARSK STIG Breaker Rolls 6.3m Concord model with front retractable paddle boards on double springs, horizontal folding 2005 trailed model with 530mm size plain & breaker rings, hydraulic folding 3 section & independent hydraulic ram actuation on paddle boards for in-out of work, 10.00/75-15.3 tyres on rear wheel carriage, very tidy set with good paintwork, small reinforce repair on drawbar Very Good condition £4,995 % Chris C 01926 338639 S7123 FLEXICOIL Single Press 1.7m Wide for front mounted use. 26” Rings 6” apart.

Has A frame mounting for use with flexicoil Front linkage (Available see S7122) Features limited steerage over nylon slider and Stands. Very Good condition £650 % Shaun 07850 978188 S6886 DOWDESWELL Powavator 130 11ft Spike rotor, 1000 rpm c\w twin hoods and steel wheels. Tines about 6” % Shaun 07850 978188 C7052 FLEXI COIL Front Press 3 point linkage mounted with steering arms, 1.8m wide open steel coil in box frame with tractor weight frame bracket on front (to add weights if required), screw type adjuster from A frame to coil frame for depth control, blue paintwork, old but working & will fit tractor front linkage Good condition £325 % Chris C 01926 338639 S7263 2011 KONGSKILDE Vibromaster 3000 6.5m Wide Hyd folding springtine. Vibro SQ Tines in 5 rows and double light barrel crumblers. 4 Depth wheels. Mint condition as hardly been used Excellent condition £8,500 % Shaun 07850 978188 C7062 OPICO Vari Disc V300 model new on farm in 2004, front 3m wide Vari Tilth demount module fitted 6 all good 600mm long legs, followed by cutaway angled disc set x 2 with 12 discs per gang (500mm diameter), rear Prisma steel Guttler ring set on pin & hole height adjuster - 27 rings 420mm diameter. Very presentable machine can work in stubbles or on ploughing Very Good condition £5,650 % Chris C 01926 338639 C7000 COUSINS 5.49m (18’) wide trailed Packa-Rolla double ring cultivator press, hydraulic folding 1995 model with recent new cast rings on half of 54 press ring system, front set rigid tines in 2 rows followed by 24” diameter all good ring sets with scraper bar, rear depth/transport carriage with good tyres, adjustable drawbar settings, road lights Good condition £6,595 % Chris C 01926 338639 C6732 FLEXI COIL Trailed 4.2m wideTwin Press, non folding model with rear depth/transport wheels fitted 340/65R18 tyres, hydraulic ram on drawbar to main frame pivot, cast 30 degree press rings 24 front & 25 rear with 170mm spacing plus scrapers, transport lock valve, ideal for use as single implement or as combination tillage train. Some spares Good condition £1,975 % Chris C 01926 338639 S7148 BLEC Multi Scraper Mounted Grader for compact tractors c\w 2 wheels at back hydrauically controllable for depth. Up to 6 Soil loosening tines and blade tp scrape Good condition £650 % Shaun 07850 978188 F3431 COUSINS Dutch Harrow 4m levelling harrow with manually folds to 3m. Points in good condition but a few missing. No levelling board or roller. Good condition poa % 07503 531889 S7235 2008 TECHMAGRI PFL 312 Fitted 12 Angled subsurface working tines, 2 Rows of wavy dics and Disc finishers Very Good condition % Shaun 07850 978188 S7054 RECO Maschio 4 Head Interow Rotavator. Used to work land between 4 sugar beet rows 20” apart. Toolbar appx 8ft long.

Done very little work Very Good condition % Shaun 07850 978188 S7372 OPICO

CULTIVATION EQUIPMENT

F3603 MASSEY FERGUSON Single row bed former. Has sub-soiler legs in front of main share and bout markers. Average condition £750 % 07503 531889 C6891 TULIP Vario 300XL Multidisc (marketed by Teagle) one pass 3m wide tractor linkage mounted cultivator, 2011 model done little work with fully retractable legs on hydraulic rams. Front cutaway rubber mounted angled discs 540mm diameter followed by 6 winged 850mm adjustable height legs with Solo shin pieces, rear discs as front 550mm dia, Guttler roller rear packer 560mm type on pin & hole height adjust arms, steel side soil deflector plate (adjustable on offside). Accumular pressure pack to tine legs. Top spec machine with all good paint etc. Very Good condition £9,500 % Chris C 01926 338639 C6647 FARM FORCE Front Press 3m wide fitted 700mm diameter 45 degree cast rings in set of 4 +9 + 4 across frame, model number F3300W with front module all adjustable for height of 2 rows spring tines, steering headstock, cleaner chains & greasable bearings to press rings, all good red & black paintwork, machine done little work Very Good condition £3,295 % Chris C 01926 338639 S7006 H BUSHELL AND SONS Cambridge Rolls Conventional set of 8FT plus 2 - 4ft Pups. Exceptional 20” crimps look hardly used. Unusual for their age. Very Good condition £900 % Shaun 07850 978188

HE - VA Disc Roller 4M Hydraulic folding Stubble cultivator. 2 Rows of angle discs 460 - 480mm. Rubber soil mat, 600mm DD type packers. Fiited Electric depth control.15/55 17 transport tyres on the back. Very Good condition £6,500 % Shaun 07850 978188 F3544 SIMBA CA10 Set of 10m hydraulic folding Cambridge rolls with alternate breaker rings. Well built and incredibly strong. Plenty of metal left on the rings. Good hydraulic hoses.

Good tyres and a set of road lights. Very Good condition £7,500 % 07503 531889 C6999 CONCEPT Speedtill 400 heavy duty trailed multi function cultivator, 4m wide with centre pivot system allows machine to rotate long ways for transport, 1999 model with large box section frame. Front clod board followed by set of 20 square section pigtail tines in 2 rows, double 450mm dia steel packer rollers & scrapers with additional set 2 rows of pigtail tines inbetween, rear depth/transport wheel carriage fitted 11.5/8015 tyres, in-cab control box for work & transport settings all hydraulically controlled Good condition £3,325 % Chris C 01926 338639

F3634 SIMBA Double Press 3.8m working width. With double row of tines and double press rings. Plenty of wearing metal left on the points. Wheels are on the back but can be converted to end tow. Average condition T.B.A. % 07503 531889 C6748 MICHAEL MOORES Frame & wheel carriage ex 4.5m double press machine, yellow painted box chassis with single ram for folding wing mechanism, 11.5/80-15.3 tyres.

No press rings fitted so could be adapted to make trailed 2 leg mole plough etc. photos available Good condition £1,400 % Chris C 01926 338639 S7253 KONGSKILDE Vibroflex 3.25m wide Cultivator with 13 Flat top tines. No wheels, simple solid machine Good condition £800 % Shaun 07850 978188 C7138 HAYLOCK

Subtiller 3m wide linkage mounted subsoiler/cultivator, 4 x 30” long ‘Norfolk’ legs with bolt on points followed by 3 x Simba subsoiler legs on box section 5 bar 3.25m wide frame - all height adjustable. Andy Guest rear steel Maxi Packer 650mm diameter on height adjustable pin & hole arms with scrapers, set 8 scalloped Knight 500mm diameter angled discs (M Press type) between legs & packer. Road lights, painted blue & yellow (Knight discs have rubber block ‘suspension’ system in mounting brackets). Useful strong machine with quantity high value spares included Very Good condition £4,350 % Chris C 01926 338639 F3605 1999 WIBERG 8m wide hydraulic folding seed bed cultivator. 4 rows spring tines and two levelling boards and crumble roller. High output machine. Good condition £6,900 % 07503 531889 F3610 COUSINS Set of 9 extra long subsoiler legs custom build to 42” Come with nearly new wearing points and shins Very Good condition £2,250 % 07503 531889 S6853 GALLUCHIO RDA 660 Trailed 6.6M folding Press with levelling boards followed by 2 rows of Cast iron rings. Transport wheels with 300/50 -17 tyres. Good condition £5,500 % Shaun 07850 978188 S7297 2004 OPICO Varidisc XL 3M Cultivator Fitted 2 Rows of Angled 16” Discs with Crumbler Roller. Plus 3m 6 tine VaritilthToolbar to mount in front of machine to open the land up before the discs. Very Good condition £3,000 % Shaun 07850 978188 C7069 VADERSTAD Breaker Rolls 10 metre wide trailed 5 gang set vertical folding, good 450mm cambridge & breaker cleats on 2m wide axles, recent refurb including shotblating & painting, new axles & bearings plus new 280/60-15.5 cleated tyres on rear carriage, new ram seals etc. Rear lighting board & gang transport straps Very Good condition £7,950 % Chris C 01926 338639 C6913 ZIG ZAG Harrows hydraulic folding linkage mounted 8.2m (27’) wide, 9 sections fitted 1/2” thick square tines pulled by drag bar, twin ram system operating on 4” x4” box section main frame painted green (probably Cousins) Good condition £795 % Chris C 01926 338639 S6524 LEMKIN Kompactor S300 3m Tined cultivator.c\w levelling boards and crumblers Very Good condition % Shaun 07850 978188 C7026 DISCORDON DXN2 Gregoire Besson 3.2m trailed version, 2004 model with lateral fold mechanism for road transport, front set mixed plain & cutaway discs at 230mm spacing followed by 5 x subsoiler tine shearbolt protected legs fitted new feet, tine module can move in/out of work by hydraulic ram action, second set discs as front set followed by rear DD type packer rings with scrapers in half sections to fold for transport, 14/65-16 good depth/trans tyres, all discs 640mm (25” diameter) - 660mm when new. Multi purpose heavy cultivator suits most soil types Very Good condition £9,495 % Chris C 01926 338639 S6403 SIMBA Single Press Trailed 1 Row cast 24” Ring press, 6” spacing c\w end tow kit . Good condition £1,600 % Shaun 07850 978188 C7045 SIMBA Solo Pro Lift 6m trailed disc & tine cultivator, 2003 model hydraulic folding with front set cutaway discs 250mm spacing & 690mm diameter (700 when new), 8 hydraulic reset subsurface legs fitted winged feet followed by rear disc set 250mm spacing & cutaway disc diameter approx 680mm.

Rear DD roller ring set 700mm dia all very sound, adj gang angling with ram spacer blocks, rear drawbar & twin hyd piping set, road lights, Auto greasing system, recent new bolts & pivot bushes, 700/50-22.5 tyres.

All very straight machine with good paintwork & wearing parts, no repair welds & dry stored Very Good condition £15,250 % Chris C 01926 338639 S7342 RUNDLE Single press Trailed Heavy Duty 900mm Cast rings . 4m Wide.nAll OK Except one broken end crimp. Good condition % Shaun 07850 978188 C7093 BOMFORD Dynadrive 2.8m wide tractor mounted all mechanical cultivator (now back in production), good tines on rotors & flat bar rear crumbler, lives out but all complete Average condition % Chris C 01926 338639 F3604 FLEXICOIL 4m wide roller with plastic cleaning stars. Unmarked shaft ends. Average condition £400 % 07503 531889 F3660 COUSINS UFDT 4M 2012 Up Front disc Tiller. 4m working width. Front mounted with 1 row of scalloped discs and 1 row of plain discs. Non-steering depth wheels. Rigid frame. Can be used in conjunction with Cousins Patriot. Has only done 110 acres work almost as new condition. Excellent condition £6,500 % 07503 531889 S7121 14Ft Springtine Standard Single S tines on 4 bar manual folding frame, Some spare tines. Average condition £300 % Shaun 07850 978188 C6781 PIGTAIL Cultivator fixed width linkage mounted 4 metre wide ex Browns Hectavator fitted 1” square section pigtail tine x 16 in 3 rows, rear solid section 18” diameter Flexicoil in full width frame with pin & hole depth adjustment on side arms. Strong machine with 5” square box section frame Average condition £795 % Chris C 01926 338639 F3428 REEKIE RDPH 2 Twin Body potato ridger with hydraulic break backs. Machine has only done approx 100ac. Paint getting flakey but metal work very good. Complete with bout markers Very Good condition £650 % 07503 531889 S7313 OPICO He Va Shatta Press 3m Front Press c\w Single row Of Cast press Rings and Front Levelling boards. Some steerage.

Good Tool Good condition £3,000 % Shaun 07850 978188 S7370 HOWARD Rotapike 120” Model with good 7” spikes. Fitted Flexicoil on back. 540 rpm PTO driven. Good condition £700 % Shaun 07850 978188 S6917 SKH 3000 Crumbler 3m Wide with 12 rigid tines, good crumblers etc. Close coupled Linkage. Good condition £900 % Shaun 07850 978188

C7068 MCCONNEL Discaerator 300 subsoiler/cultivator, 3m working width fitted 5 shearbolt adjustable height 48cm legs at 640mm spacing followed by 2 rows rubber mounted cutaway type 500mm diameter curved mixing discs, front set 6 & rear set 12, side soil retainer boards, rear solid ridge roller (DD profile) 600mm diameter on pin & hole height adjustment, road lights. Frame recently shotblasted & repainted McConnel yellow. Machine in first class order with good legs, points & discs - looks like new. Very Good condition £10,650 % Chris C 01926 338639 C7066 WEAVING Bullock Stubble/Straw Rake, 6 metre hydraulic folding tractor linkage mounted version, 4 rows 16mm diameter tines, adjustable rubber tyred depth wheels on end of wings, road lights, twin ram fold for narrow transport width with lock bars, 38 tines per side (requires 2 tines one side) can also be used on grassland Very Good condition £3,350 % Chris C 01926 338639 C6399 KVERNELAND Trailed Press 4 metres wide (non folding) made up from set of 700mm diameter furrow press rings (25 in total), axle sets with 2 x 7 ring & 1 x 11 ring, cleaner chains, screw adjuster for drawbar height, rear depth wheel module hydraulic ram raise & lower with 12.5-15 tyres. Concrete ballast block in centre frame, can also take tractor weights on frame bars for extra ballast. Set spare rings on shafts (could be made double press) Good condition £1,400 % Chris C 01926 338639 S7347 2012 KNIGHT

Raven 2.8m Combination Subsoiler c\w 3 deep subsoiler tines, 4 Intermediate legs with speedloc points, variable choice. 2 rows Angled 50 cms scalloped discs. Hydraulically folding and depth controlled Heavy duty disced packer.

Done very little work Excellent condition £11,500 % Shaun 07850 978188 S6750 LEMKIN 2m Crumblers To Fit 4M Thorite 9 Cultivator or similar. 2- Multi tubular crumblers c\w frames to attach to machine with bearings etc. Tried once hence as new Excellent condition % Shaun 07850 978188 C7075 SIMBA ProLift Parts all new unused wearing parts consisting of one complete leg (fitted with all wearing parts). Plus 22 points, 15 wings, 22 shins, 11 leg base anti-wear plates, 100 roll pins & 2 cutaway type 28” discs with 40mm centre square hole. To be sold as one lot Excellent condition £895 % Chris C 01926 338639 C6687 SIMBA DD Ring Trailed 3.3m double press with 600mm diameter all good rings & depth/transport wheels at rear, refurbished in 2009 and unused 2013, total weight 2640 kgs, can be used alone or behind disc harrows etc. Very Good condition £5,450 % Chris C 01926 338639 S7367 SUMO

Front Press 2M Tyred press with 5 11R 22.5 Tyres in frame plus tool bars with tines to cultivate which fold out to 4m Very Good condition £2,000 % Shaun 07850 978188 C7101 WEAVING BULLOCK Stubble/Straw Rake early 6m wide 2 section hydraulic folding mounted model with Accord ‘A’ frame hitch, no depth wheels, fixed position 16mm round spring pigtail tines in 4 rows (requires 1 tine), red paintwork, stored undercover, can also be used on grassland Good condition £1,900 % Chris C 01926 338639 C7073 FARM FORCE Front Press 4 metre wide cast ring type with steering system 3 point linkage headstock, hydraulic folding with transport lock bars, 700mm diameter all good press rings x 25 in red painted frame, 11 ring centre section & 7 rings each wing, machine done little work Very Good condition £3,450 % Chris C 01926 338639

9

DE-STONERS

S7166 HOEKSTRA GLB Bed cultivator with clamp on hook tines for 2 - 34” rows plus enough spare tines for a full bedwidth Fitted Ridging hood for 2 - 34 - 36” rows. Some spares Average condition £2,250 % Shaun 07850 978188 S7015 1991 GRIMME Mustang Trailed destoner with 6 Piece shares, Full diablo, 45 mm Main web with Clod blocks, 30mm pitch 55 wide cross conveyer, Steering axle. Good condition £2,000 % Shaun 07850 978188 S6229 1997 GRIMME CS 1500 Combistar Trailed destoner with 2 large discs, large diablo, 4 full shares & 2 half shares. 7 rows of stars onto 45mm web and cross conveyer. Steering & levelling axle with 12.5 -80 - 18 tyres. Good condition % Shaun 07850 978188 S6230 1997 REEKIE RT 170S Rear mounted Bedtiller later model with chain case skid, tines appx 70% plus RBM 2 Ridgers on back with duck bill points. Very Good condition £1,350 % Shaun 07850 978188 S6694 2004 JONES Triple Bed Tiller Hydraulic Folding Single rotor Bed Tiller with 3 of 1.65m Heads. 2- 6.9- 6.00 Depth wheels.

4 Ridging bodies. Nice And Straight, Recent New clutch and yoke. Very Good condition £5,000 % Shaun 07850 978188 C6987 GRIMME Tornado 87 destoner/declodder, front half diablos with discs & split shares, twin continental webs, recent new front web with bearings, all usual specification, rear cross conveyor (no boulder box), small farm use dry stored Good condition £1,150 % Chris C 01926 338639

10

DISC HARROWS

C6861 PARMITER Utah 40-32 trailed offset 12’ wide disc harrows, pair with connecting hitch can be operated parallel behind high horsepower tractor, blue painted models with 16 front cutaway & 16 plain rear discs, front 22” diameter & rear 24” all with set scrapers, manual angle adjust, hyd operated depth/transport wheels, weight per disc 79kgs - priced as a pair Good condition £2,695 % Chris C 01926 338639 S7343 PARMITER 12ft 6” Trailed X pattern disc harrows, manual fold up wings. Rear drawbar & plumbing. 18” front discs, 16” rears. Recent new Bearings fitted. 11.5 - 18 Transport tyres. Average condition £1,200 % Shaun 07850 978188

36 NOVEMBER 2014 S7234 COUSINS K 125 Heavy Duty Offset disc harrows. Rigid model 10ft Wide. Fitted 2” Cutaway discs front & rear. 2 Depth transport wheels, 15- 55 - 17 tyres. Fitted Rear drawbar Good condition % Shaun 07850 978188 S6402 PARMITER UTAH 250 Heavy trailed 3m Disc harrows. 23” Cutaway front discs, 23 -4” cutaway rears. 15/55 - 17 transport tyres.

Rear drawbar & hydraulics.Sound Good condition £3,000 % Shaun 07850 978188 S7203 1982 SIMBA 2B 5.5m Hydraulic folding Trailed offest disc harrows. 24” Cutaway Rear Discs, 22/3” cutaway discs on the front.

Fitted Rear Drawbar & transort wheels Good condition £4,000 % Shaun 07850 978188 S7345 2003 KUHN

Discover XM 36/660 Trailed Heavy Disc Harrows. Recent 26” Discs (Alternate Scalloped) & Bearings. Open Centred Crumblers to follow. Hydraulically Fold in for transport to well under 3m. Road lighting. Ready To work Very Good condition % Shaun 07850 978188 C7048 PARMITER Utah trailed 12’ wide offset disc harrows, blue painted model with manual gang angling, 16 x 22” diameter front cutaway discs & 16 plain rear approx 21” dia, 80kg/disc weight, rear drawbar, transort/depth wheels. Paint average but all working set. Average condition £1,395 % Chris C 01926 338639 S7269 1995 QUIVOGNE APX TL Trailed Offset disc harrows. Good 25” Cutaway front discs, worn rears. 4 wheels 10 - 15. Appx 3.6m Working width. Gangs foild round to transport under 2.9m. Very good rear drawbar & plumbing TBA % Shaun 07850 978188 C6754 PETTIT 77 trailed offset disc harrows, 3.6m (12’) working width with part wing fold round section for transport, manual gang angling, cutaway front discs 22” diameter, plain rear discs 21-22” diameter, depth & transport wheels with hyd ram actuation (seal slight leak), rear drawbar, red paintwork, weight 74kg/disc. Same model as Dowdeswell 77’s Good condition Offers % Chris C 01926 338639 F3626 SIMBA 2B 2.9m working width. Nonfolding. Scalloped front gang smooth back gang. Hydraulic lift. Rear drawbar and hydraulics. Comes with custom built press to tow behind. Average condition £4,000 % 07503 531889

11

DRIERS

C7126 PEDESTAL Driers quantity 6 all galvanised steel, perforated type approx 3m tall complete with 3 fans (suck type) to fit, can be supplied with all 3 phase cabling & plug sockets to match. Grain conditioning Spears x 4 all galvanised steel 7’6” long & 4” diameter complete with 1hp single phase suck type electric fans to fit. Price is for lot. Very Good condition £2,250 % Chris C 01926 338639 C6494 ALLMET Drier Fans pair 15hp axial fans with silencers ex Allmet continuous flow drier used as hot & cold air supply, removed from drier Good condition Offers % Chris C 01926 338639 C6703 DRYING TUNNEL Laterals galvanised steel ‘A’ section perforated laterals to fit to tunnel sides, all 3’ long quantity 74 with end sections etc (10” high & 11” wide at base). Also 15hp centrifugal 30” diameter fan 3 phase electric left handed type with recent starter & wiring Good condition poa % Chris C 01926 338639 S7363 OPICO 380 8 Ton Gas fired PTO driven mobile drier. Rape screens Manual unloader. 7 .50 - 16 Tryres.Manifold included for gas bottles. Average condition £1,200 % Shaun 07850 978188 C7123 WILDER Portamatic WPM 50 automatic batch grain drier, 1988 model with MTE controller/programmer. Top fill bottom discharge box type on wheels can be portable but currently in static position, 3 phase electric fan, diesel fired burner, full dealer service history & in full working order includes 6” filling auger from outdoor wet grain silo & short discharge auger which feeds a conveyor Good condition £1,400 % Chris C 01926 338639 F3430 BENTALL RS7 - 50 Grain Drying Fan. Complete with 3 phase motor and controls. Rectangular outlet 3’x2’6” Good condition £600 o.n.o. % 07503 531889 S7319 OPICO Quiet 595 12 Ton Mobile drier , Fitted 25 HP 3 phase electric motor to drive. Gas Fired Burner & Rape screens. GT Grainguard controller. Only 1600 hours. Manual unloader. PTO drive available if required. Kept & used under shelter. Very Good condition £7,750 % Shaun 07850 978188 S7045 FARM FANS 20TPH Double Unit On over the other c\w ASC, Gas fired on 3 phase electric. Plus Double Leg Perry 13.5m Elevator only 5 seasons old and Aspirator. Also Good Carier 14.5m 8” Elevator. Buyer removes % Shaun 07850 978188 C7071 OPICO 545XL mobile GT grain drier, 12 tonne capacity with pto drive 32” axial fan & gas burner, 1994 model fitted hydraulic drive low level swing round top discharge auger, 9’ long filling hopper with 8” auger, 60tph 12” diameter vertical mixing/cleaning tub auger, twin wheel single axle model 12’ wide & stabiliser legs, good screens with small repair one side. Not used 2 seasons so will need service before work Good condition £6,250 % Chris C 01926 338639 F3655 OPICO Quiet 590 1994. RB-500. Mobile grain dryer. LPG fired with auto shut off system. 12T capacity. PTO drive to axial fan and augers.Rear fold-up laoding auger.

Small crop screens. Central auger and unloading shute. Good condition £5,000 % 07503 531889

12

DRILLS

S6747 2000 SIMBA 4M Freeflow Hyd Folding Drill, Doubler coil heavy pigtail tine coulters with new points. 2 rows of Forklift tyres, Following harrow & marker. Opt JD pump £1250 Very Good condition £7,500 % Shaun 07850 978188 S7248 2010 AMAZONE KE 3000 Super 3M Power Harrow C\w Rubber disc packer & hydaulic markers,1000 RPM. Fiited with Amazone AD - P 303 Special Disc coulter drill c\w Access Step and rail, Road lights & metering wheel. In As new condition having only drilled 20 acres Excellent condition POA % Shaun 07850 978188 F3613 CARRIER Cultivator drill 3.5m.

Bout markers and tramline kit. Full working order. Great for those wet autumn drilling days. Good condition £1,300 % 07503 531889

• See also the wanted section and read the buying/selling details before calling F3558 SUKUP 3m box type grain drill. Imported from USA 19 disc coulters. Min-till/Notill drill. Comes with separate “soil loosening caddy” like a tool carrier. Linkage mounted.

0.5 ton seed capacity. Very good drill in wet conditions. Good condition £5,500 o.n.o. % 07503 531889 S7162 AMAZONE D8 -40 Superdrill 4M Mounted drill for Power harrow or tractor mounting. Suffolk coulters in 2 rows, Long Hyraulic markers, Large Access platform, Following harrow. 260/70 - 15.3 depth wheels on ends. Very Good condition % Shaun 07850 978188 S7254 FIONA R90 / 3.00 3M Box drill with Suffolk coulters, disc markers, and pigtail tine following harrows. Very Good condition % Shaun 07850 978188 C7116 ACCORD Drill Combination with 4 metre Kuhn power harrow, Accord Ferrag DA-S pneumatic air drill with large fan hose & ESC (variable seed control), 32 suffolk coulters with almost new steel tips, twin tramline units per side, disc bout markers, pre- emerge markers, rear mini pigtail following harrow, fine seed kit. Mounted on Kuhn HR4000 power harrow with 8” ‘L’ blades, headstock reinforced mounting frame, tractor wheel eradicator tines, clod boards & 400mm steel rear packer. Complete with drop flat transport trailer, all steel chequer plate floor, rear wheel carriage with hydraulic ram operation & hyd brakes, bed size 4.3 x 2.5m painted green. Useful complete unit Good condition £4,995 % Chris C 01926 338639 C7140 KUHN ACCORD

Drill Combination HR4003 Kuhn power harrow 2005 model fitted quick fit tines, screw adjust clod boards & Andy Guest independent hydraulic long disc markers, rear 550mm toothed packer, all good tines & side plates.

Box section rear frame with ‘A’ frame mounted Accord pneumatic grain drill, ESC metering unit recently fitted with big fan, extended hopper with cover, hopper tramlining units. Rear tined cultivator drill module, 30 ‘S’ tines (Germinator type) in 3 rows with rear seed boots & pigtail following harrow, demount stands.

Useful multi porpose drill on modern power harrow done little work, great value Very Good condition £5,495 % Chris C 01926 338639 S7066 STOCKS AG Micro Meter 6 Outlet Box type small seed and pellet applicator . Suitable for rape, grass seed etc. 60 litre hopper . Requires 12v power supply to operate . Hardly used c\w books and some fittings Excellent condition £950 % Shaun 07850 978188 S7268 CARIER 4/33 Culivator Drill Mounted 4m model, c\w Spring tines, following harrow with pre emergence markers & end tow kit. Checked over a few years back and unused ever since. Good condition % Shaun 07850 978188 C7046 SULKY Maxidrill TRW model grain drill trailed 6m model, hydraulic folding for transport, ring hitch drawbar & hyd driven fan to Roger/Sulky pneumatic seeder unit from large central hopper, front tandem set rubber block mounted 400mm ‘Cultidisc’ notched disc set followed by steel toothed 650mm diameter packer roller. Rear drilling module 36 independent sets in 2 rows including rubber tyred small press wheels behind sprung notched disc coulter, tined following harrow, disc type centre bout markers. Star wheel land drive to seeder unit, 700/40-22.5 transport tyres, RDS Ultron in cab controller. Rape seed kit, 2007 ex show model only done max 1500 acres from new Very Good condition £22,000 % Chris C 01926 338639 S6893 ACCORD DL 4m Mounted pneumatic suffolk coulter drill c\w tramlining, access step, Hopper extension & cover . Tidy for age Good condition £700 % Shaun 07850 978188 C6916 MCCONNEL Shakaerator 3m wide linkage mounted 7 leg base unit with rear adjustable height solid coil, 24” all good legs fitted wide points & good shins. Demountable Vicon LZ 401 Supaseeder pneumatic drill hopper with hydraulic fan drive & hopper cover, twin seed tubes to each leg with coulter tube behind foot, duplex chain & belt drive to fan, rear starwheel ground drive to drill. All in very tidy order with good paintwork etc.

Ideal rape establishment or bean drill Very Good condition £4,395 % Chris C 01926 338639 C6993 VADERSTAD Rapid 6 metre trailed 600P model grain drill, new in 1996 but converted to Agrilla tine system & refurbed with all new discs a few seasons ago. Front twin track eradicator tines followed by 2 rows Agrilla spring tines, 2 rows Crossboards & genuine Vaderstad notched drilling discs all 380mm diameter, rear pigtail following harrow, twin disc pre-emerge markers, later type disc bout markers. All good multi rib tyres, hydraulic fan drive & star type metering wheel. New barrels fitted to pair of hopper mounted metering system in 2013, twin shutoff tramling units per side, yellow hopper cover, all good disc seed delivery boots, instruction book & comes complete with full set rigid tines Very Good condition £12,995 % Chris C 01926 338639 S7267 1997 KRM MR 305 Mounted 4M Drill suitable for stand alone drilling or fitting on Power harrow. Sprung loaded coulters in 3 rows, Hydraulic markers and twin disc pre emergence markers. Road lighting. 26- 12 12 Track grip tyres. Good condition £2,750 % Shaun 07850 978188 C6931 MASSEY FERGUSON 30 Grain drill 4m model with 23 disc coulters, end tow transport kit fitted, Reekie rear following harrow, good 14.9-24 tyres on silver wheels (late model on an X prefix serial number), hydraulic markers, tramlining (5+T cam), wheel eradicator tines, 5 coulter return springs each side, standard plus bridge link (for power harrow/cultivator) drawbars, feed units to both hoppers but curently used as grain only, fine seeds rollers, calibration kit & some spares, fully working drill with 12.5” diameter discs (13” when new) and all good disc cheeks Good condition £1,695 % Chris C 01926 338639 C7042 OPICO Air 8 Variocast small seeds Till Seeding unit, 150 litre steel hopper with 12 volt electric fan unit for pneumatic system, starwheel ground drive unit on mounting frame, 2 seed rollers & calibration tray. Cable, switch & fuses in line to tractor power source.

Box section framework included for cultivator etc. mounting, fixed 2.6m wide rear toolbar holds 8 fan outlets & seed tubes. 2008 model in very tidy fully working condition. Very Good condition £2,650 % Chris C 01926 338639 F3661 CLAYDON V-form 2004. Min-till drill 3.75m working width. Delta type coulter arrangement. Sulky “Optiline” metering unit and MS control box. Has on the go in cab seed rate control & adjustment. Plenty of metal left on the coulter legs. Comes with a set of press wheels. Very Good condition £7,750 % 07503 531889

C7142 HORSCH Sprinter 3 metre CO airseeder drill, 2004 model upgraded in 2007 with 12 Duett coulters, hydraulic front levelling board, tyre packers & following harrow, pto drive fan on drawbar, disc markers, tramlining return to hopper type, 2200 litre hopper with cover. Drill Manager in-cab controller unit with seed flow system (block sensors) Very Good condition poa % Chris C 01926 338639 S6812 VICON 6m Supaseeder Suffolk coulter Air Seeder c\w Following harrow, hydraulic markers and End tow kit using 11.5/80 - 15.3 tyres Good condition % Shaun 07850 978188 F3652 STANHAY 12 row sugar beet drill. All seed meters tested & calibrated. Comes with 6 spare seed boxes, different crop metering wheels (EP3 & D1) and own transport low loader. Good condition £750 % 07503 531889 S6723 MATCO Moncentra SP 6 Row Precision drill with cell wheels for Sugar Beet, Done very little work Good condition £800 % Shaun 07850 978188 S7312 2003 ACCORD 3M Drill mounted on Kuhn HR 3003 Power Harrow with Std packer, and Hydraulic marker . Guest 3 row Suffolk conversion with tungsten tips, pre emergence markers & following harrows.

Good condition £6,000 % Shaun 07850 978188 F3562 THURLOW NUNN Onion drill. Three bed with 5 twin rows per bed.Granular applicator. Soft front depth wheels and stainless steel rear wheels. CW overnight sheet. Good condition £3,500 % 07503 531889 C7141 HAYLOCK Heavy Duty 4m wide cultivator frame (6”x6” & 4”x6” box section) with pair front deep tines & wide feet to follow tractor wheels, followed by 4 rows Simba Cultipress tines used as 16 drilling coulters with seed boots behind at 25cm spacing, hydraulic independent large Andy Guest disc markers, rear 500mm dia steel toothed packer on screw adjusters with scrapers, Accord pneumatic seeder unit & hopper mounted above with hyd motor fan drive, rear step platform, all legs depth adjustable, paintwork average. Useful bean & min till cereal drill with spares Good condition £1,895 % Chris C 01926 338639 F3606 1997 SIMBA Free-flow 6m wide Preemergence markers, extra track eradicators, RDS box. Needs some new pipes and wearing points. Tyres all good. Stored under cover.

Average condition £6,000 % 07503 531889 F3542 HORSCH CO6 6m Trailed grain drill.No-till, min-till and conventional drilling.

2004. Tungsten tip coulters draw bar mounted hopper 2t capacity with hydraulicly driven filling auger. Tramline kit with preemergence markers & bout markers. Electronic controll box. Metering cassettes for a wide range of crops OSR - Beans. Pipe work all in good order and good metal. A very well maintained high output machine ready to go straight to work. Excellent condition £10,000 % 07503 531889 S6909 AMAZONE 3m Combination Comprising of KG302 Heavy 1000 rpm Duty Power harrow with new blades and tyred packer. Fitted with RPAD 302 Drillstar with Suffolk coulters in 2 rows, Hydraulic markers and access step, Hydraulic following harrows and road lights. Good condition £3,950 % Shaun 07850 978188 S7002 STANHAY Mk 2 6 Row precision drill with flat steel press wheels, 8 & 7” Belts for sugar beet, 5 kale belts & and Sweed belt for cover drilling. Good condition £600 % Shaun 07850 978188 S7311 2009 ACCORD 3M Drill mounted on Kuhn HR 3004 Power Harrow fitted with Gutler packer, and Hydraulic markers. Guest 3 row Suffolk conversion with tungsten tips, pre emergence markers & following harrows.

Very Good condition £7,250 % Shaun 07850 978188 S6971 VICON LZ 401 Supaseeder 4m Accord Style & metering drill using Vicon Polyhopper. Good Suffolk coulters in 2 rows. 7 -12 wheels. Hydraulic centre markers.Tidy little drill Good condition £800 % Shaun 07850 978188 C6996 TINE Bean Drill 4m wide linkage mounted Kongskilde Vibroflex cultivator with Vicon LZ 401 pneumatic grain drill hopper mounted above, feed tubes supply 17 heavy duty tines in 3 rows, terra tyres for depth control & seed metering, hydraulic bout markers, pto drive to fan, coulter boots behind each tine share, manual folding wings with 2 tines each Good condition £2,225 % Chris C 01926 338639 C7027 DRILL COMBINATION with Kuhn HR4002D power harrow base, 1996 model fitted 8” good tines, clod boards, rear 450mm diameter packer roller plus scrapers, 1000 pto drive to thro’ gearbox, sound side plates.

Accord DA-S pneumatic grain drill fitted above on ‘A’ frame with demount legs, 32 Suffolk coulters in 2 rows with good tips, 4 x tramlining units in hopper with full hopper cover, disc bout markers for centre marking, star wheel drive to metering unit, rear following harrow (drill unit younger than harrow) Good condition poa % Chris C 01926 338639 S7281 MF 30 4M 23 Hoe Coulter grain drill Good condition % Shaun 07850 978188 S6678 2012 KRM PS 120 M1 Small Seeder unit with up to 8 Outlets for subsoiler etc, 2 spare sets of fine seed metering wheels, Electric fan, uses Sensor (wheel mountable)to meter rate. Digital in cab read out.Inc spare pipe and 5 distrubution tubes.

Fitted but Never used New condition £2,375 % Shaun 07850 978188

13

ELEVATORS & CONVEYORS

S6725 HIGH CAPACITY 12M Powered Commecial elevator, 600mm belt, Small Spreader hopper at feed end with access pltform roud it. Splits and folds back to transport. Hydraulic up and down plus powered slewing and feeding wheels. Good condition % Shaun 07850 978188 S6603 CARIER 6” Top Conveyer Late type with Sprung tensioners. 5.25” by 7.75” Internal casing. Raddles at 9” centres (3 link spacing. c\w 3 phase, motor Very Good condition £1,000 % Shaun 07850 978188 S7212 ANGUS Powerflight M100 Cable and polydisc Elevating conveyer on Carriage with 6 castor wheels. 90mm nylon discs inside 100mm tube. Appx 20ft long. 3 kw 3 phase motor Average condition % Shaun 07850 978188 S7215 Flat Belt Conveyers 2 - 20FT Flat belt conveyers appx 15” wide on steel frames c\w 3 phase motors. Average condition % Shaun 07850 978188 S6604 9 “ Single leg Elevator, 9” Buckets on 10” Belt 11” by 6” casing. 3 phase motor & drive. Appx 20ft long. Removed ready to go Good condition % Shaun 07850 978188 F3266 FYSONS Rubber Belt 25 foot conveyor with chevron belt. 6 foot extention with manual slew. 3 phase motors, two speed drive, hand operated hydraulic pump and twin rams for lift, full width and narrow hoppers, towing eye. Belts in good condition suitable for cereals and roots. Good condition £1,500 % 07503 531889 S7306 CARIER Conveyer 5” By 7.5” To unload @20 tph c\w 2ft by 3ft receiving hopper.appx 15ft 6” long Average condition £400 % Shaun 07850 978188

C7098 FYSON FE model 33’ long rubber belt grain/roots straight elevator, hydraulic hand pump raise & lower mechanism, 3 phase elec motor drive, good rubber tyres, 500mm wide cleated belt, small detach receiving hopper, long mains cable, all in full working order Good condition £1,250 % Chris C 01926 338639 S6919 FYSON FE 85 Elevator 27ft Elevator with good 500mm belt, 3 speed SINGLE Phase Drive! Front Jockey wheels and potato hopper. Hydraulic up and down Very Good condition £1,900 % Shaun 07850 978188 C6906 CARIER Belt & Bucket vertical grain elevator, single leg box section all steel 10” x 7”, 1.5kw elec 3 phase motor & gearbox drive, good base section, approx height 22-23’ all taken down in sections, good belt with steel 8” buckets spaced at 5” apart Good condition £795 % Chris C 01926 338639 S6987 RAMSEY ENGINEERING 34 Ft Elevator Mobile 600mm Rubber belt type.

3phase top drive, Powered wheels swivel to slew automatically using sensors and poles. Hydraulic down and up to 16ft. Well specced machine with small circular fill hopper. Good condition £1,500 % Shaun 07850 978188 S7088 FARMERS FRIEND Angleveyer Appx 20m Long capable of moving grain up 45 degrees at appx 20 tph Good condition % Shaun 07850 978188 S7168 FYSON FE 85 27ft belted elevator C\w 8ft extension suitable for corn or potatoes. 2 hand operated lift rams. 2 small wheels, lift bar & small hopper. Single phase 240v Average condition £1,200 % Shaun 07850 978188 S7374 DOWNS Moonlight 10m Long 600mm Elevator Fitted 2.6m Manual swivel head with new belt. 3 speed Belt drive Via 3 phase electric 4 kw motor. Small receiving hopper, Lowerable castor wheels Plus lift car.

Hand hydraulic up and down. Very Good condition £2,250 % Shaun 07850 978188 C7122 SKANDIA Angleveyor galvanised square box section 45’+ long with plastic 8” flights, currently operating from grain drier into 2 buildings with 2 dropper outlet units which have chain operated sluice gates & roof supporting brackets. Modern good capacity conveyor suit similar operation, buyer to dismantle Very Good condition £1,800 % Chris C 01926 338639 C7007 WYTRAC Elevator fitted 500mm wide cleated rubber belt, 25’ long on wheels (similar to Fyson), single phase electric motor drive, winch wire height adjust system, sound belt but small centre cleats missing, timber side extensions, can be used for small bales etc. Average condition £395 % Chris C 01926 338639 S6602 Top Conveyer 36FT Long 8” conveyer with 7.5” HD chain, 3 links between raddles (11” centres) 3 phase motor & Fenner 20 :1 gearbox Good condition £800 % Shaun 07850 978188 S6816 LANICHBURY Double leg 9” Belt and bucket elevator with 4.2 kw 3 phase motor.

Appx 27ft long. Also 32ft Single leg elevator.

Good condition % Shaun 07850 978188 S6885 GAMART ENGINEERING 6m Flat Belt Conveyer with 60 cms belt on 4 legs with caster wheels. 3 phase side drive. Used one season only Very Good condition £2,000 % Shaun 07850 978188 S7165 B AND W HANDLERS 12.9 M Heavy Duty Elevator, 12.9m Long with very high lift via powered rams All 3 phase electro hydraulic. Inc Powered drive wheel and power slew . Good 600mm cleated belt. As new 7.50 - 10 transport wheels. Plus castor wheels at back and sides to stabalise. Folds to 8.7m for transport.Recently refurbished and painted etc. Very Good condition £3,000 % Shaun 07850 978188 S6726 HERBERT Industrial Elevator 9m Plus 2m Head. 750mm main belt. Hydraulic raise & lower, plus head separately up and down. Good condition £5,750 % Shaun 07850 978188 F3563 B AND W MECHANICAL HANDLING Pair of bulk intake hoppers. 20t capacity each. Can be run in parallel or seperately. Would suit high speed grading or sorting line. 2x 15Kw 3phase motors on each hopper. Each hopper has it’s own control box. Comes with; 2xcross conveyors & 1xSwan neck elevator all 1m wide high speed. All are heavy duty construction. Good condition £12,000 o.n.o. % 07503 531889

14

FANS

C7131 MATTHEWS YATES Axial drying fan in circular galvanised steel housing, 3 phase motor drive to 1m diameter single fan, 3’ long two section housing with flanged ends Very Good condition £425 % Chris C 01926 338639 C7130 TYPHOON Centrifugal free standing drying fan, 50hp (40kw) model HE5E, 3 phase electric motor drive with starter, all red paintwork righ handed type with 36” diameter fan. Outlet size 25” x 33” flanged, removed & dry stored ready to transport. Good condition £675 % Chris C 01926 338639 S7231 TYPHOON TCB 7 Single phase portable fan, RH Inlet, 4” Round outlet.

0.25KW Motor 2.1 amps 2800 rpm. Good condition £295 % Shaun 07850 978188

15

FEED & FORAGE BOXES

S6910 TAARUP 852 3 point linkage mounted Bale chopper/ spreader. Self loads Round or big/med square bales vai hydraulic back door. Top RH hydraulically swivelling top spout with electric angling chute to throw chopped straw into pens. Very Good condition £4,500 % Shaun 07850 978188 S6385 1993 JOSKIN Feeder Box. Mounted Self filling silage feeder. Chops before feeding on the RH. Unload only to the left. Used once only Very Good condition £1,750 % Shaun 07850 978188 S6144 TEAGLE Tommahawk 5000 3Pt Linkage monuted Bale Shredder, Spreader.

Round bale drum machine with spread left or right. Average condition £1,000 % Shaun 07850 978188 S7329 1999 RECO Bulldog Feeder Wagon, 17 Cubic meter. Happy Feeder weigh system (Recent cells) Single axlre with 445/65 R22.65 Supre singles. 75mm RH dischage belt clears 1m Good condition % Shaun 07850 978188 S6867 2006 KEENAN Klassik 140 Diet Feeder, Std Height LH Discharge with 2ft chute, rear ladder, STAD 04 Weighcell system. Small set blades to chop potatoes and Slabs of straw. Very Good condition £8,000 % Shaun 07850 978188 F3658 MALLEAUX BD1400 Root crop chopper & feeder. Hydraulily driven auger feeds roots through chopping port into feed trough. Can also handle silage and hay.Comes with quick release brackets for MF 955 front end loader. Different mounting options are available. Good condition £4,000 % 07503 531889

16

FERTILISER SPREADERS

S6769 VICON Rotoflex RS XL 2 Disc Mounted Fert spreader Do 24M c\w Cover grids & road lights Good condition £1,500 % Shaun 07850 978188

WWW.WRIGHTSREGISTER.COM

C6823 FRONT TANK System for liquid fertiliser (similar to Opico Nitrojet), consisting of front linkage mounted Knight 800 litre tank with Ford tractor weights in base for added stability, hydraulic motor driven 2 cylinder diaphragm pump with big filter & electric variable rate controller with incab RDS Spraymaster 200 unit, can operate at 100 litres/hectare using pressure based system, long delivery pipe to rear implement with couplings, all put together in last 2 years (new pump etc.). Could also be used with potato planter etc. Complete with single axle MF trailer chassis & pair plastic tanks mounted above, total capacity approx 3000 litres to act as bowser, hydraulic driven delivery/suction pump, pipework for both tanks etc. Rear steel lockable container for chemical cans or similar, can also be used as water bowser.

May split Very Good condition £5,950 % Chris C 01926 338639 S6684 1999 KUHN Axera H Spreader parts 99 - 02 As follows : Setting Mechanism X2 LH R4072056 RH R4072058.Disk Positioning X2 LH R4072056 RH R4072026. Mud flaps. Electric Rate Meters X2 R2044718.Agitator R4072078. Sensors (Speed) X3 R2009440. Motor Console X1 R3072018.

Motor X1 072050. Valve Block R4072074.

Cylinder R4072041.

Axera Box R2053163.

White Box and Wiring R4072083. Grill- Middle. Grill- Side X2. Hyd Hose and wiring Very Good condition £700 % Shaun 07850 978188 C6956 RECO Sulky DPX 1504 twin disc fertiliser spreader, 1500 litre steel hopper with folding cover, stainless spreading discs can operate at 12 to 24 metres, hydraulic on/off, internal hopper grids, good tight disc driveline, has been repaired on chassis arms but fully operational. Also Kuhn Comete ZSA twin disc spreader with hydraulic on/off control, extended steel hopper holds 1200kg, cat 1 & 2 linkage so suit small tractor, good pto, in sound order for its age priced at £350 Good condition £475 % Chris C 01926 338639 C7117 LELY Centreliner twin disc mounted fertiliser spreader, 1996 model with 1500kg hopper & yellow cover, hydraulic tilt ram for headland work, recent new stainless disc vanes & bearings, currently set for 20m but will operate at 12 to 24m, some wear in disc shaft dive but put away oiled up fully working Average condition £385 % Chris C 01926 338639 C6988 LELY Centreliner SX 6000 Centronic twin disc mounted fertiliser spreader, Centermatic twin weigh cell system operates with machines own built in Radar unit for on the move application variable rates linked to forward speed. Stainless discs & vanes with stainless metering units currently set at 24m (can spread from 9 to 36m via gearbox sprocket changes), 3000 litre hopper capacity , folding hopper cover, headland tilt ram, road lights. Radar unit has been added recently at a cost of £1000 & only requires 12 volt lead to operate machine on any tractor Very Good condition £2,295 % Chris C 01926 338639 S7328 LELY Centreliner CX Late 24M Model twin disc spreader. Holds 6 half ton bags. C\w headland tilt ram, Road lights, Cover & Quantity of spares Very Good condition £1,200 % Shaun 07850 978188 C6948 AMAZONE ZAF 1203 linkage mounted fertiliser spreader, twin disc spreads up to 12 metres, 600kg capacity steel hopper, hydraulic shut off to each disc (discs can operate independently), big bag cutter facility, tidy small machine in gwo Good condition £475 % Chris C 01926 338639 C6696 NODET DPS12 Parts only for fertiliser/small seeds/granular application, all from used machine including fan with gearbox, metering rollers & small seeds kit (note no hopper or other items) Good condition Offers % Chris C 01926 338639 F3594 LELY Centre Liner 24m twin discs 1.5 T capacity Hydraulic shut off and hydraulic outside bout control. Good condition £450 % 07503 531889 C6976 AMAZONE Taskers linkage mounted twin disc fert spreader, model ZA-F 803 with hydraulic shut off, steel hopper holds 1.5 ton, orange paintwork, sound machine stored dry unused recently suit small tractor. Average condition £345 % Chris C 01926 338639 S7304 KUHN Precis 1500 Twin Disc Spreader, recent discs for 24m Good condition £1,000 % Shaun 07850 978188 C6950 LELY Centreliner 1500 twin disc mounted fertiliser spreader, hydraulic shutoff, all good 1500 litre capacity steel hopper with cover, older model machine spreads up to 12m but kept dry stored in working order Good condition £495 % Chris C 01926 338639 S6832 AMAZONE ZAU 1501 Twin disc spreader c\w 12m & headland discs, plus hopper grids. Sound spreader well looked after. Good condition £700 % Shaun 07850 978188 S7252 2004 KUHN MDS 1132 Mounted twin disc spreader, with BS 1210 hopper extension to give a 2 ton capacity. Hydraulic shut off and headland spread setting. Very sound having seen little work. Good condition % Shaun 07850 978188

17

FORKLIFTS & HANDLERS

S7333 HYSTER 2.5 Ton Industrial Forklift, diesel engine , 4330 rec. hours. Cab minus doors, Sideshift, pallet tines. Mech trans with Clutch. 7 - 15 Pnumatics 60% with 6.50 - 10 rears. Good starter. Good condition % Shaun 07850 978188 S7077 SANDERSON SB50 TC 2wd Rough Terrain Forklift, Torque converter transmision, 4.5m Triplex mast. Full cab c\w glazing. 16.9 - 28’s 30 %, 11- 16 rears 70%. 3 Spools and tech reel. Good condition £3,250 % Shaun 07850 978188 F3535 1985 SANDERSON SB50 TC 2wd forklift. Triplex free-lift 4.5m lift mast. Ford 3 cyl. Engine, 6950 recorded hours. Torque converter transmission, 4 spools, 16.9/14-28 tyres, 50%.

Starts on the button. Grain bucket and pallet tines £3,500 % 07503 531889 F3557 MANITOU 2600 1993 Teleporter 5.7m reach 4WD, 4W & Crab steering. PUH + electrics. Front spool. 4 cyl. Turbo engine.

8805Hrs. Tyres 40% Forks only. Superb compact loader Very Good condition £8,000 % 07503 531889 F3432 HYSTER SpaceSaver 70 Yard Forklift truck. 3t, free lift, mast to approx 20’. 6 cylinder gas engine. 2 speed manual transmission with clutch. Solid wheels Starts on the button. Mast chains, bearings and hydraulics in good condition. No oil leaks. Good condition £1,200 o.n.o. % 07503 531889 F3645 MF 35 based 1961. Industrial 702 Loader fitted with a 710 backactor. Engine & clutch re-build in 1983 and done little work since. In working order but needs some attention. Selection of spare parts available including 3 point linkage arms. Good tyres 80% rear 14.9/13-24 front 7.5-16 lorry tyres.

Power steering. C/w a selection of back-hoe buckets 12”, 18”, 24” & 72” ditching. A restorers and collectors item & a little gem. Average condition £2,400 o.n.o. % 07503 531889

S7352 2003 MANITOU

MLT 629 Turbo Telescopic Handler, fitted Pick up hitch, Good 16/70 - 20 tyres all round only 6400 hours, pallet tines, Standard Manitou hitch. Nice Clean straight machine. Available now. Very Good condition £16,500 % Shaun 07850 978188 F3457 1970 MCCONNELL Tail Slave TS 20 Rear mounted forklift. 1t capacity on forks.

Fits onto tractor mounted sub frame. Would suit small holder or fruit grower. Average condition £150 poa % 07503 531889 S6737 SANDERSON Fork Truck Bucket PM 35 for Sanderson rough Terrain & industrials with Quick Release Carriage and Double rams (Drilled to accept teeth and use as soil bucket.) 6ft wide. Good condition £675 o.n.o. % Shaun 07850 978188 C6872 BUCKET Brush Agriquip model 2m wide new in 2004, hydraulic motor & chain drive to very good 22” diameter nylon brush, brackets & height adjusters with demount stands, all in red paintwork Good condition £895 % Chris C 01926 338639 F3663 JCB 530-70 2000. Loadall teleporter.

10750 Hours. 4WD 4WS. Joystick control.

MOT untill Oct. 2015. Air-con cab in good condition with split door. PUH Tyres 17.5 L24 at 80% remaining. Good condition £15,000 % 07503 531889 S6913 MANITOU MB25P Rough Terrain fork lift with 5.4m triplex mast fitted with Strimech hydraulic tipping backplate. 70% 15.5/80 -24 Drive tyres, 50% 10.5/80 - 18 rears. 5600 hours, good cab with all glass in. Good condition £2,250 % Shaun 07850 978188

18

GRAIN EQUIPMENT

S5192 BOSWELLS OF BLAIRGOWRIE 2 Screen Dresser 20TPH Pre cleaning dresser, 2 screen shoes with varous alternative screens. Mounted on platform in air. 7ft by 5ft6” by 6ft Tall. Plus extraction duct out.

Good condition % Shaun 07850 978188 F3628 BENTALL SIMPLEX Grain store individual duct fans. 5x 0.5Kw single phase.

1x0.5kw 3phase. 1x2.2kw 3phase on trolley.

Good condition £175 each % 07503 531889 S7040 GALVANISED 10” Grain laterals Perforated sides Suitable for tunnel fitment. Both 3 Ft & 4 Ft Lengths. Appx 500 available Good condition % Shaun 07850 978188 S7016 Plywood 8ft by 4Ft Grain walling sections made from 10mm ply with 100mm timber frames. Dismantled ready to move. Good condition £50 each % Shaun 07850 978188 F3467 ALMACO SPT Thresher Small Bundle Thresher suitable for threshing small quantities of seeds or grains. Was used by a seed development company. Has a 3hp Briggs & Stratton engine and a peg threshing drum, mounted on wheeled frame and easy to move. Still availabe through Nickersons.

Average condition poa % 07503 531889 F3642 GREY Axial grain store fan 7.5Kw 220v single phase Average condition £150 % 07503 531889 S7087 MICHAEL WILLIAMS Streamline Dust Extraction system. Fitted 10HP 3 phase fan, 3 x 18” Diameter dust extraction socks. Various ducts for buyer to remove. (unit already out) Good condition % Shaun 07850 978188 S7270 GALVANISED Grain laterals 10” by 10” Perforated sell laterals mostly 3ft wide some joined to make 6ft. on 2 pallets Est 30 - 40 Good condition £120 % Shaun 07850 978188 S7216 LAW DENNIS D100 Corn Dresser, all Steel on stand, 3 phase Average condition Offers % Shaun 07850 978188 S6681 GALVANISED Ducts 121 6ft Galvanised steel grain laterals appx 15” tall by 16 wide at base 3” across the top. Plus 26 same 3ft long, some end caps. Very Good condition £6 each % Shaun 07850 978188 F3627 NEUERO GSDL Grain sucker blower.

PTO Driven on single axle. Comes with lorry loading stand. Also has lots of pipe; 22x6’, 4x14’ and a selection of bends and flexi pipe Good condition £3,000 % 07503 531889 S7201 Grain Tunnel Galvanised Steel Appx 69ft long in 24 sections (Ea 3ft) 6ft tall plus 2ft ext by 3ft int. spigots for grain laterals.

Good condition % Shaun 07850 978188 S7210 SIMPLEX 18ft Diameter Out door Drying bins 12ft 6” to the eaves, c\w side and roof doors, Access ladders, Drying floors and one Sweep auger. Also 2 - 15ft Diameter 15ft tall round bins installed inside without roofs to be dismantled Good condition % Shaun 07850 978188 F3564 GRAIN STORE LATERALS Selection of sizes; 37x 6’, 90x 4’ & 31x3’ Steel and aluminium alloy with steel frames. End caps available. All straight and no dents. 6’ at £6 each. 4’ at £5 each. 3’ at £3 each £2 each end caps Very Good condition % 07503 531889 S6817 LAINCHBURY D25/ 10 Seed Dresser Timber framed, appx 5ft by 8ft by 8ft tall. A few screens, 3 phase. Very Good condition £350 % Shaun 07850 978188

19

GRASSLAND EQUIPMENT

C6946 CARIER RL30 Weedwiper, 3m linkage mounted model with 6” diameter roller fed by full length felt impregnated dispenser, plastic chemical container & all mixing equipment, 12 volt pump, machine fitted on additional toolbar with wheels to assist good ground following Good condition £800 % Chris C 01926 338639 F3547 LELY Hibiscus 2006. 4.2m wide Grass rake. 3 point linkage mounted. All tines in place very well maintained and stored under cover. £2,250 % 07503 531889 C6878 LSM M9 Grass Topper, tractor linkage mounted pto drive with 3 cutting rotors, 9’ operating width on adjustable side skids, gearbox & vee belt drives, large swinging blades on centre rotor shafts, flexi strap to top of ‘A’ frame allows machine to float, all fully guarded with green & black paintwork done little work Good condition £985 % Chris C 01926 338639 S6352 1990 MACDON 3000 Trailed 7.5m wide Cutterbar Swather, knife cutterbar lays onto canvasses then out through centra swath 1.3m wide. End tows for transport.

Rare tool Good condition £5,000 % Shaun 07850 978188 C7078 IH Cutterbar Mower model S-42 in good original order, top link bar built in, adjustable pitch lever, swathboard & timber pitman arm, good pto drive shaft & paintwork, 5’ cutter bar with 3 knives. Suit 1960’s classic tractor Good condition £275 % Chris C 01926 338639 S6386 JOSKIN EB360 R3 Mounted folding grassland harrow. 3.6m Working width folds to 2.4m. Levells molehills dung etc. Cat 2 linkage Very Good condition £1,600 % Shaun 07850 978188

S6388 JOSKIN D280 CZ Pasture Topper ,2.8m Breed, Mounted Cat 2 Machine, PTO driven. Skid height controlled Good condition £1,250 % Shaun 07850 978188 C7109 VICON Acrobat tractor linkage mounted hay swath turner/rowing up machine, 4 star wheels in 2 pairs adjust for each operation & turn by ground contact. On farm from new & in good fully working complete order with spare parts, last used for turning straw rows Very Good condition £245 % Chris C 01926 338639 S6889 TAARUP 337 Trailed mower with double yoke headstock drawbar, 10/80 -12 travelling tyres. Had conditioner originally but no longer fitted Good condition £1,500 % Shaun 07850 978188 C6771 VICON Andex 783 trailed twin rotor rake, Terralink Quattro model fully adjustable with hyd rams from 7.0m to 7.9m working width (operates easily with 3 x3m swaths), single backbone frame with hyd folding wings carrying tined rotors with 4 pneumatic tyres per side, lower link hitch attach to tractor allows rear machine wheel steering on connecting linkage. Purchased as ex demo machine in 2012 & done 2 1/2 seasons on small farm. All in full & complete working order with centre rubber curtain partly missing. Very Good condition poa % Chris C 01926 338639 C7025 MAJOR Full Offset grass topper, model 800 tractor linkage mounted with twin gearbox all shaft drives from pto, 8’ wide cutting width twin rotors with swinging end flails, adjustable height skids with replacement bolted bottom sections, front & rear mesh stone guards, repair to main box section frame but all fully working order Good condition £925 % Chris C 01926 338639 C7057 HAYBOB 300 genuine PZ model hay tedder/windrower, 3m working width twin rotor type with wide tyres, linkage mounted & pivot headstock, centre divider, pair rear swathwindrowing ‘gates’, no welds on frame, requires approx 7 tines & springs on rotors, hard to find machine used on small farm Good condition £850 % Chris C 01926 338639 C7039 MASSEY FERGUSON 32 cutterbar mower, linkage mounted with good pto shaft, 5’ cutterbar with guard & swath board, all complete in working order little used very original suit 1960’s/70’s classic tractor Very Good condition £295 % Chris C 01926 338639 C7056 SAMASZ 2 Drum linkage mounted mower, 1.65m cutting width, 2006 model all fully guraded with complete set skirts, good pto drive, cord pull system for transport of machine in line of tractor, good cutting drums, fully working machine oiled & dry stored on small farm (owned from new). Very Good condition £995 % Chris C 01926 338639 C7018 BOMFORD Flex Wing Cutlass 460 trailed topper, 15’ model with centre section & 2 x hydraulic fold wings all shaft & gearbox drives with slip clutch protection, central cutting dish with 3 swinging heavy duty blades on each section, debris chains front & rear blades, adjustable cutting height from 25 to 375mm can follow undulating ground, 1000 pto drive, 6 x 200/60-14.5 tyres at rear, road lights, 2006 model owned from new in bright yellow paintwork, all straight & tidy had little use & not worked last two seasons all dry stored Very Good condition £7,250 % Chris C 01926 338639 C6937 QUANTOCK Grass Harrow 4 metre hydraulic folding version with 6 rows 8mm thick spring tines, new in 2009 & done little work all in very straight order, front pneumatic tyres on adjustable height wheels, twin ram operation. Ideal for moss extraction & grass aeration. Current new price £4700 Very Good condition poa % Chris C 01926 338639 C6770 KUHN FC313FF linkage mounted centre pivot mower conditioner, 2 1/2 seasons work only approx 400 acres/year, 3.1m (10ft) cutting width with 6 disc bed, rear nylon ‘V’ shaped conditioner tines with all adjustable swath deflectors, full protection skirts all very good condition, twin pressure gauge headstock unit for ground following ‘lift control’ floating cutting bed system, fold up demount stand, all very good paintwork. Retirement sale - rare opportunity for excellent quality mocon Very Good condition poa % Chris C 01926 338639 C6697 KUHNFLEX 4 Rotor hay & grass tedder, tractor linkage mounted with rubber skirted vertical drums fitted steel tines, model KE4 requires pto shaft & swath deflector arm.

Suitable for spares or repair Average condition £475 % Chris C 01926 338639 S7226 MAJOR 605 Mounted 6ft Topper for small tractor. Single rotor with skids. Very Good condition £1,000 % Shaun 07850 978188 C7038 KUHN GRS21 twin rotor hay tedder/windrower, linkage mounted with pto drive, lift up rear swath former rear gates, full set tines (currently removed to assist storage), pneumatic rubber tyred wheels under each rotor, 3m approx working width, done little work on small farm & dry stored since Good condition £595 % Chris C 01926 338639 C6938 VOTEX Grassland Topper 6 foot version with twin horizontal cutting blades, tractor linkage mounted, adjustable side skids, good pto, old but sound with set new blades & one new side skid. New drive belt fitted in 2013. Requires gearbox mount plating so suitable spares or repairs Good condition poa % Chris C 01926 338639 S7037 WESSEX 9FT 3 Bladed Topping Mower, c/w depth skids & End tow kit with 2 wheels Good condition £975 % Shaun 07850 978188 S5984 2001 KRONE AMT323CV Tariled 3.2m Mower condtioner with steel flails.1000 rpm pto. Reasonable Green paintwork Average condition £1,000 % Shaun 07850 978188 C6944 TWOSE Buckrakes Flatback pushoff type suit tractor linkage or loaders, 12 tine 7’ 6” wide with twin ram operation &10 tine 6’6” wide single ram model, both have short side tine facility but no tines fitted. Yellow paintwork & hydraulic hoses stored undercover & only done non farm work at exhibitions (10 tine priced at £565) Choice of one 12 tine (which requires box section tine holder base plate renewing) & two 10 tine models Good condition £695 % Chris C 01926 338639 S6664 2009 OPICO 3m Sward Lifter Fitted 3 subsoiling legs with Discs and individual guttler 4 ring press modules on each leg. 2 spare sets of feet. Usefull bit of grassland kit hardly used Excellent condition £4,700 % Shaun 07850 978188 C6939 CHAIN HARROWS Tractor mounted 12’ wide with 2’ manual folding wings, chains from headstock to rear frame allow ground following, one complete mat 7’ deep in box section frame with all very good single sided grass harrow tines, red paintwork, done little work in straight order Very Good condition £650 % Chris C 01926 338639 C7019 BULLDOG Reel Mower trailed triple gang with tractor pto drive, made by SABO Roberine (Dutch) with 2 front & 1 rear 30” wide cylinders, 5 bladed type with rollers, gearbox & belt drives, rubber tyred wheels, manual fold for transport, recent refurb of cutting cylinders etc. Toolbox & screw jack, all in working order Good condition £895 % Chris C 01926 338639

NOVEMBER 2014 37

• See also the wanted section and read the buying/selling details before calling

WWW.WRIGHTSREGISTER.COM

20

HEDGECUTTERS

C6856 AGRIMASTER Hedgecutter Golden 48W model tractor 3 point linkage mounted & independent pump hydraulic oil supply to machine, 2007 model done very little work fitted 1.25m bracket mounted model T125R flail head allows adjustment on box section beam, ‘T’ section boot flails with rear roller, 5 spool lever controls to cab, 4.8m reach, built in oil cooler, road lights, all good paintwork Very Good condition poa % Chris C 01926 338639 C6679 BOMFORD Hedgecutter Flail head, Protrim 1500 model 5’ (1.5m) wide with own hydraulic motor drive (high capacity type) & belt drive to flail shaft, fitted ‘T’ section heavy duty flails, rear roller, box section mounting frame, done one season only on mid mounted machine - note this is just a flail head for sale Very Good condition poa % Chris C 01926 338639 S6387 BOMFORD 81 - 81 Bracket mounted swing round ( LH > RH) 8m Hedger. In Cab electric multi joystick controls. 1.4m head.

540 PTO. In use recently. Good condition £3,800 % Shaun 07850 978188 S7307 2005 SHELBOURNE REYNOLDS Powerblade 6.0 T Tractor mounted with Telescopic 6m reach. Recently Fully Recondioned. Pivot swing round arm has 1.3m head with hydraulic roller height adjustment.

Electric in cab controls. Very Good condition £6,250 % Shaun 07850 978188 S6395 TURNER Hydomower Bracket mounted Hedgecutter c\w 4ft 6” head.

Springback arm, 4 spool control block on adjustable arm. Medium Duty Flails Average condition £850 % Shaun 07850 978188

21

IRRIGATION EQUIPMENT

C7094 NETAFIM Trickle Irrigation system comprising of 18000 metres of 3/4” (20mm) black plastic pipes with perforation holes at 50cm spacing, stored on 4 steel spools sufficient for 8 acres of potatoes or other crops.

Mains & intermediate supply 75mm dia plastic pipes with manifold connectors to 20mm system both flexi & rigid ARI pipes with valve ends plus saddles & elbows. AMIAD Armadillo filtration & pressure/volume management system flushing timer unit fits to pump with dump pipe (pump not included) Good condition poa % Chris C 01926 338639 C6975 EVENSHOWER Alloy irrigation pipes 10’ (3.1m) long & 2” (50mm) diameter quantity 28 including 7 sprinker heads on risers, latch type fittings. Also 10 x 15’ long dribble type pipes with outlets at 120mm spacing, 1” diameter including steel multi leg stands. All suitable veg crops or similar Good condition poa % Chris C 01926 338639 F3587 SIMPLEX Circular above ground bulk rainwater stores. Two available; 12,000Gal. & 8,000Gal. Both have Booth liners and covers. Good condition POA % 07503 531889 S7381 CAMPARI Irrigation pump 4” Single Stage PTO Driven Pump on 2 wheeled chassis c\w PTO shaft and couplings. Good condition £450 % Shaun 07850 978188 F3646 KUBOTA OHV petrol water pump.

45HP, 2.9Kw, Maximum head 35m. Maximum capacity 550L/min. Nearly new done very little work starts easily. £500 % 07503 531889 F3641 Various glasshouse irrigation pumps. 1x Alcon single phase 2HP Thames pump. 1x DAB Jet 100m 1HP Average condition £100 each % 07503 531889 C6997 IRRIGATION System suitable large scale vegetable/herbs or similar to cover approx 4 to 5 acres, Roda SA black plastic 2” diameter rigid pipes all connect together with quick fit couplers, large quantity 20’ long with Nelson risers & Rotator sprinkler heads (complete with metal securing stakes), lay flat hose system which connects to underground main. Caprari engine driven pump with 4” system & full auto controls cpoupled to 2 cylinder diesel engine on skid plate base, new in 2005 with built in fuel tank built

by Dalto Power Products Good condition £4,950 % Chris C 01926 338639

23

LIVESTOCK EQUIPMENT

C7089 PORTEQUIP Cattle Feed trailer, portable trailed model on wheels with drawbar, body size 14’ x 5’ with steel floor & opening tailgate, 28 feeding spaces angled type on sides & vertical bars on ends, used 1 season only all very straight with good paintwork & tyres & dry stored. Also same size older Marshall model with all vertical bar feed spaces 12 either side & 4 each end, opening rear tailgate, 10.00/75-15 tyres, steel floor has had heavy duty fibreglass base fitted above (non rot) - all in good working order priced at £685 Very Good condition £1,125 % Chris C 01926 338639 C6799 COTSWOLD Bulk Tank dairy hot water automatic washer unit, stainless steel with control panel, cold water feed, size 110 x 52 x 38 cms. Requires some refurb work (motherboard), 18 months old used with 2 tanks of 2000 & 1700 litre capacity Good condition £600 % Chris C 01926 338639 C6919 LAMB Creep Feeder shelter type single sided all galvanised, adjustable roller bar front entry, rear access lid to good full length trough & hopper, size 2.5m long & 1.4m deep Good condition £285 % Chris C 01926 338639 F3662 HI SPEC

Super Chopper. Root fodder crop chopping machine. Has loading hopper with cleaning web conveyor feeding a rotary chopper with bottom discharge. All mounted on a free standing frame. Powered by Perkins 414 engine starts on the button. Hopper holds 0.5 T fodder beet. Good condition £1,750 % 07503 531889 S6911 THISTLETHWAITE Turnover Crush Hydraulically operated fully galvanized steel , with hydraulic belly belts to hold animal.

Spool valves mounted on frame to operate.

Can be Bolted to floor or mounted on tractor 3 point linkage. Very Good condition £5,950 % Shaun 07850 978188 C6901 FARROWING CRATES Set 4 free standing type qty 3 all tubular galvanised with opening sides actuated by sow standing on gas strut system with counterweight, adjustable rear gate, front trough & water supply, length 7’3” (6’ for sow). Green painted single crate all painted has legs to bolt to floor, rear gate, fixed sides, front trough, 6’ long for sow, little used. Sold as one lot Very Good condition £400 % Chris C 01926 338639

S7075 Creep feeder In Galvanised steel, 8ft by 4ft with 4 wheels suitable for sheep. Very Good condition £200 % Shaun 07850 978188 C6709 ALFA LAVALL Milking parlour equipment ex 20/20 system now dismantled . Items remaining are - Candle jetter washers x 10, milk pump, ACR units 12 x older version with float chambers, 6 gallon glass jars part number 7271245 quantity 19, Boumatic claws (teat cup clusters) x 10. Please phone for more details Good condition poa % Chris C 01926 338639 F3664 GLENDALE 2010. Portable sheep handling system. 13”10’ race with shedding gate. Guillatine entry gate with rope control from shedding end. Comes with 6x 9” hurdles (3”2’ high). Good tyres ready to tow away. Good condition £3,000 % 07503 531889 C3635 CATTLE TROUGHS to fit between 15’ stanchions or hang on to feed barriers, galvanised steel (14’9” long) construction with horizontal black plastic semi circular twin wall inserts (for feed trough), 18” wide 8” deep, quantity 6. Also hayracks to fit above if required Good condition poa % Chris C 01926 338639 C7083 SHEEP Feed Troughs galvanised steel round & square profile mainly 9’ long all straight for use in field or buildings for cake etc. Total quantity 40 - for sale available in 2 lots of 20, price is for one lot Good condition £370 % Chris C 01926 338639 S7072 Sheep pen gates Galvanised steel, 6 ft wide. Appx 20 some as new mostly very good. Stored inside Very Good condition % Shaun 07850 978188 C7100 MONARCH Paddock horse breaking pen, all fully galvanised 7’ high steel mesh panels in frame with solid lower sections 8’ long with joiner couplers, quantity 22 plus entrance gate unit to form a circle, little used top quality make Very Good condition £2,250 % Chris C 01926 338639 C6897 GALVANISED Field/Yard Gates IAE Continental Cattle type heavy duty 12’ long with box section ends, vertical stays & 6 bars of 45mm tube, new unused with some fittings - quantity 3. Also single 14’ gate with fittings (like Stamford field gate) 7 bar type with 30mm intermediate & 45mm top & bottom round bars. All new unused stored inside, sold as one lot Excellent condition £460 % Chris C 01926 338639 C6794 GRAYS Silage Grab model 245, serrated front blade & solid sides, twin ram type 1.6m wide with all good tight tines x 10, Manitou fittings plus hydraulic couplings on top rail, new in 1999 all very straight & tidy with good rams & some new tines, operator instruction book included Very Good condition £750 % Chris C 01926 338639 F3540 STURDLEX 8’ Trailed road/paddock sweeper with collection hopper. Pto driven.

Older machine running order ex-farm. poa % 07503 531889 C7081 HARRINGTON Sheep Handling mobile unit, all galvanised trailed system suitable quad bike etc new in 2002. Comprises detachable load race ramp to attach to penning race, forward pen for teaser sheep, guillotine gates, mesh race floors, main pen with blind opening side to allow animal to tip on to adjustable crate for management of feet/dagging etc. Pedal operation to invert animal, swinging side arm to hold shearing gear/markers etc. Carrying platform for race with room for additional penning hurdles (not included). All very straight & in full working order can also be used as worming/injection unit etc. Very Good condition £1,695 % Chris C 01926 338639 C6903 PHARMWEIGH Lamb & Pig Weigher mobile weighcrate with full digital operation including auto control Drafting gate attachment unit, stainless steel construction with concertina end gates & adjustable side gate (for animal size), 12 volt operating system with readout & control panels on top section with aerosol marker storage trays. Can be used with hand held EID reader, all very straight fully working condition Very Good condition £3,375 % Chris C 01926 338639 S6912 Tyre Scraper 8ft wide on 3 point linkage frame using one third of an earth mover tyre. Also12ft pusher blade to keep feed in check along feed passage. Very Sturdy build.

Average condition £300 each % Shaun 07850 978188 C6902 INCUBATOR Lincu Avitec model 864AT, single phase electric with auto turn trays in 6 decks, humidifier unit attached, auto control with variable settings, free standing unit 4’6”x3’x2’6” holds 864 hens eggs & approx 1000 pheasant eggs etc.

Complete with Hatcher unit with 4 trays to hold 192 hen eggs, single phase model number SIL 140 recently serviced. Both used on small holding purchased new 4 years ago to be sold together including operator books Very Good condition £1,595 % Chris C 01926 338639 C7014 BATEMAN Heavy duty calf dehorning crate, mobile model with end wheels & lift up handles, adjustable front guillotine yoke gate with chin rest & straps, rear adustable lock bar system, mesh floor.

All bright unmarked galvanised steel virtually unused & a saving on new price Excellent condition £470 % Chris C 01926 338639 S7301 TWOSE Passage Scraper 1.75m wide, Old But little used Good condition £150 % Shaun 07850 978188 S7031 IAE Lamb Creep Feeders Galvanised steel, Converted to end tow with 2 wheels and one and drawbar at other. 89” Long by 43” deep Good condition £200 each % Shaun 07850 978188 C7136 CALF PENS Timber hardwood 5 rail type made by Mears, 2 sets of 4 to hold 8 calves, pens have 6’ back section with divider hurdle 4’6” long and front section with yoke & pair bucket rings 2’4” wide, all stand 3’6” high, timber slatted hayracks fit to pen divider. Unused for a number of years so well neutralised & all dismantled dry stored Very Good condition £235 % Chris C 01926 338639 C7096 CATTLE Feed Barriers set of 8 galvanised angle type 13’9” long & 44” high with 10 spaces all 2” box frame & round verticles, fix to 7’ high 4” square posts which slot into concrete floor. Two panels have gate hanging fixings & similar to six others fit to post on bracket system that allows height adjustment - all in good strong straight order. Plus pair 14’9” long Yoke barriers to fit 15’ stanchions (gate haning type) with timber lower section (18”), 5’ high in total with 6 yoke sections, good strong galvanised design with additional 5 space 5’6” high unit available at extra cost if required - would split yokes from barrier set. Very Good condition £1,750 % Chris C 01926 338639 S7074 BATEMAN Calf Creep Feeder c\w 3 Point linkage attachments to move. Galvanised steel panels with painted steel frame. Good condition £400 % Shaun 07850 978188 C6930 IRONWORK Double sided shelter type mobile lamb creep feeders, overall size 6’ x 6’ fully galvanized steel with square profile corrugated roof panels, steel end wheels with handles at opposite end, 7 space openings with adjustable top bar for lamb size. Heavy duty quality make (WM Ironwork) all very straight & tidy. Quantity 5, price is for lot Good condition £1,450 % Chris C 01926 338639

F3630 CUSTOM MADE

Cattle feed troughs and barrier combined. To fit 15’ bays on the outside of a building. Box steel construction with barrier to 5’ height & wooden troughs. Steam cleaned and painted. Very Good condition £500 each % 07503 531889

24

LOADERS AGRIC/ INDUSTRIAL

S7325 1999 FERMEC 860 Back Hoe Loader ,4wd , Powershift, Air con cab Owner driven machine in Tidy all round order. 9250 hours, extenda hoe, 8ft 4 in 1 bucket with pallet tines. 18.4 - 26 rears 60%, 16/70 - 20s 70% with fenders. Buckets optional Good condition % Shaun 07850 978188 C6923 LOADER Implements - Chillton Manubal round bale handler, tubular vertical hydraulic ram operated opening side arms suit squeezing wrapped round bales (operates like your hand, does not pivot), Matbro fittings. - Slewtic 8 tine Sheargrab 4’ wide with solid sides, serrated front & side blades, twin ram system, Euro/Quicke loader fittings.

- Cherry 9 tine Muck fork & grab, 7’6” wide, good rams, Matbro fittings, requires new tine base plate & some grab tines Good condition poa % Chris C 01926 338639 C7001 MF 40 front end trip loader with all good manure fork, all complete with fitting brackets & hydraulic rams etc. to fit MF 35 & 135 tractors Good condition £240 % Chris C 01926 338639 C7023 PARMITER Sheargrab model SGS250, twin ram operation to serrated front blade, 1.7m wide with 12 good main tines plus large diameter end tines, 1998 model with Merlo telescopic fittings (can be price reduced without fittings), small repair required to top of tine box webbing but all straight mechainacally Good condition £895 % Chris C 01926 338639 C7137 RIKO TN360A Power Loader to fit JD 2140 4wd or similar tractors, 1995 model with Grays front attachment backplate, parallel lift with all double acting rams, 3 spool control with Bowden cables to cab, lower fixing brackets go to rear axle, over centre handle for quick hitch beam mounting, front hydraulic service, removed from tractor all complete ready to transport Good condition £1,125 % Chris C 01926 338639 C6981 BACK ACTOR unit ex MF 40 wheeled digger, 220 (Davis) model type with all fittings to go back on to a tractor or modified to fit on telescopic loader etc. sliding backframe, hyd stabilser legs, spool lever controls on machine, 12” digging bucket with teeth. Also similar model ex Muir Hill loading shovel in army green paintwork with seat & spool lever controls, hydraulic stabiliser legs, 2’ wide digging bicket with teeth & 5’ ditching bucket, can fit to back of digger or other machines Good condition £500 % Chris C 01926 338639 S7127 1998 BAC Toe Tip Bucket 8ft by 4ft 6” deep by 5ftr 6” tall with good replaceble blade and brackets for JCB or Volvo Shovel.

Good condition % Shaun 07850 978188 F3433 BOMAG K301 Sheeps Foot Compactor. Cummins V8, 3 speed powershift. Hydraulic blade. A large and formidable piece of kit! Average condition £6,450 o.n.o. % 07503 531889 S7380 ALO QUICKE 4560 Loader suitable for 2wd IH 74 series and simailar tractors.

C\w Centre Crowd ram and lever operated attachement head. No Brackets Good condition £600 % Shaun 07850 978188 C7114 FORD 13-6 Industrial 2wd Digger tractor based on a Ford 4000 unit in yellow paintwork, 1969 model 2wd manual transmission less cab, 7402 recorded hours, 16.9-28 &10.0016 good tyres, front power loader fitted 6’ wide bucket, auto dig backhoe with seat & spool control levers fitted wide ditching bucket plus 24” digging bucket with teeth & 14” bucket, also front adaptor plate to suit Matbro attachments.

Little used recently all running & working but requires some tidying Good condition £1,995 % Chris C 01926 338639 S7261 IRON FAIREY Mk 1V Mobile Crane Rated 7 ton with 360 degree part manual, part hydraulic telecopic jib, Cab, Ford 6 cylinder engine, truns well. Has appx 26ft reach Ideal for farmbuilding construction. Good condition £5,500 % Shaun 07850 978188 F3426 KOMATSU D53S-17 Tracked Drott.

110hp, 3 speed powershift, 4-in-1 bucket.

Heavy duty loading shovel. Track gear good.

No ripper. 8300 recorded hours. Has had replacement engine. On farm use only recently.

Good condition £12,500 % 07503 531889 C6535 SANDERSON Bulk Bucket ex Rough Terrain Forklift, 8ft wide, 3’6” high & 4’6” deep, twin ram tip on backframe with fitting to suit pallet tine rail - could easily be modified to have brackets welded for other fitting type, yellow paintwork, bucket in all sound order Good condition £695 % Chris C 01926 338639 C6828 MASSEY FERGUSON Beet Bucket to fit 80/880 model power loader, 5’6” wide & 2’6” high, done little work & all straight with good bottom tine bars, paintwork dull Good condition £165 % Chris C 01926 338639 S6899 MUIR HILL A 5000 4wd & 4 wheel steering Loader with Perkins 6.354 engine, Runs well appx 6000 hours. 15.5 - 25 tyres between 10 & 50% All Glass in cab. Framework to carry attachments Good condition £2,950 % Shaun 07850 978188 S7382 1999 BENFORD PT 6000 Dumper Truck, pivot steer 6 Ton Model c\w Rops frame.

Only 1330 Hours from new. Very Good condition £3,250 % Shaun 07850 978188

25

MILL & MIXERS

C7111 RENN

Mobile Crusher Roller Mill, model RMC24 with large tapered steel feed hopper plus timber greedy boards & magnet protection in hopper grille. Pair 16” diameter fluted crimping rollers 24” wide all adjustable for different crop types (beans to cereals) fed by adjustable hopper shutter. Pto & belt drive with sprung loaded roller protection, long vertical discharge auger at rear operates to either side from gearbox drive, quality machine made in Canada & done little work Very Good condition poa % Chris C 01926 338639

S7140 BAMFORD Roller Mill 9” C\w hammer mill, Vintage Flat belt driven model complete and kept inside.

Plus Edlington EG No 2 Cut box chopper Good condition % Shaun 07850 978188 S7214 RECO MENGELE 4 Ton Mixer Wagon Axle removed for fixed installation.

Appx 11ft by 6FT Suitable for mixing various materials. Average condition % Shaun 07850 978188 S7073 SILOS AND STORAGE SYS Meal Mixer In Galvanised steel uses 45 degree auger bottomed hopper to mix, driven by split phase motor. Only 7ft 6” tall. Also Bentall 4” Roller mill with small hopper & split phase motor. Very Good condition £975 % Shaun 07850 978188

26

MISCELLANEOUS

F3618 Quantity of flatpack carboard orchard fruit trays. Good condition £325 % 07503 531889 S7078 PETTIT Ramps Pair Of Heavy Duty Trailer backing ramps to gain access to hopper etc. 8ft by 4ft by 12” lift Deck made of 3/4” Plate. Serious stuff Very Good condition £800 % Shaun 07850 978188 C6751 BEMA Agrar Rotary sweeper, tractor linkage mounted for front or rear, 2.3m working width complete with detach steel tipping collector box, swivel headstock, hyd motor drive to good 18” nylon & steel brush, pair caster wheels on rear, demount stand. Done little work Very Good condition £1,125 % Chris C 01926 338639 S6920 PERKINS 248 Engine Ex MF 487 Combine, Recent complete overhaul. Removed on frame c\w fuel tank, Radiator & control panel. Very Good condition % Shaun 07850 978188 F3470 OSB/Sterling Board Very large quantity of 8’x4’x12mm(?) sheets. Used but mostly undamaged. Stored undercover. Call for more information. Average condition £6.50 each % 07503 531889 C7112 GENERATOR Engine driven model operating in a small ex truck body, BKB 7.5 Kva 3phase generator with switchgear powered by a direct drive small 4 cylinder diesel engine ex car/commercial vehicle all in its own framework with fuel tank & cooling radiator etc. Unused for a few years since operating at a stables complex & ideal for a back-up system on farm or similar use. Container body size 13’ long (Luton type), 7’ wide & 7’6” high Average condition Offers % Chris C 01926 338639 C6865 WORKSHOP Crane (engine lift) heavy duty model with extending arm, made

by CAM on 4 castor wheels, hand pump hydraulic lift ram, all box section easy to manoeuvre, end hook will reach over frame limit, approx 1 tonne lift at short arm Good condition £225 % Chris C 01926 338639 S4735 BOM Post Hole Borers Hydraulically driven to fit on Forklift tine. 6”, (Opt 9” & 12”) Easy to fit & use prices from New condition £1,200 % Shaun 07850 978188 C7107 MOBILE WELDER 300 Amp arc welder complete with long leads and all equipment, powered by a Ruston 2YWA 2 cylinder air cooled diesel engine with electric start & valve decompressor. All in single axle chassis with canopy & leaf springs, built in fuel tank, ring hitch drawbar & overun brakes, 18x7 tyres, road lights, jockey wheel, staring handle & spare wheel. Newly painted blue well built unit in full working order can weld at long distances from base unit without loosing power. Good condition £575 % Chris C 01926 338639 S7138 MATTEI BRI 44 Screw Vane compressor 3ph. Caw hose & fittings. Good condition £150 % Shaun 07850 978188 S7070 QUALTERS AND SMITH 180A Sawmaster 3 phase powered bandsaw for steel cutting c\w workvice, powered head lift etc.

Industrial quality machine. Also Pehako Bandsaw, more basic spec, 3 phase, POA. Good condition £600 % Shaun 07850 978188 F3615 5 Outdoor fridge evaporator units in alloy casing. Would suit chilling system on large bulk store. All have fan units for forced air ventilation. Good condition £3,200 % 07503 531889 S7133 2006 LISTER PETTER LPW 3 MA Cabinet enclosed quiet Generator 10.3 Kw 240v. Fitted automains failure kit plus supply changover box. Hardly used virtually as new.

Bargain Excellent condition £2,300 % Shaun 07850 978188 C6920 KING HITTER Post Driver Series 3 model full specification made by Fairbrother (New Zealand), 3 point linkage mounted with hyd top link to 12.6” mast, hyd side shift ram, 250kg weight on cable actuation hits post support block, counterbalance weight, 5 x rear spool valve operator controls, demount stands, new in 2006 with all good paintwork.

Contractor spec will earn its keep Very Good condition £4,295 % Chris C 01926 338639 F3644 AVIA 184 Stick welder 64Kw On trolley with leads and clamps. Average condition £250 % 07503 531889 S7137 MAX ARC WELDER 3 phase oil cooled stick welder .C|w cables and kit Good condition £100 % Shaun 07850 978188 F3465 POSTMASTER 8000 Post Driver Has been used on a skid steer loader and would suit a telescopic loader or tractor. A compact machine that uses a hydraulic drop hammer that gives fast impact (50 per minute)as opposed to brute force! Very Good condition £4,000 o.n.o. % 07503 531889 S6297 HOES Drainage Machine Self propelled, hydrostaically driven unit on 16” tracks with Ford engine. Comes with 7ft 100mm Draining chain. Plus Seperate clean up conveyer 8ft by 19” and filling slitter. Average condition £7,500 % Shaun 07850 978188 F3521 2003 DESIGN Hydraulic Power Pack Mains electricity driven hydraulic power pack with electric motor. 34l/min. 5pin 32amp socket. Variable flow. Airblast oil cooler, 50l oil capacity Suitable for running Mini bale wrappers or similar hydraulicly driven equipment. Call for more details Very Good condition £3,650 % 07503 531889 S7361 LISTER SR 2 Generator 2 Cylinder deisel fitted Brush 6.0 Kva Single phase generator. All Inside Container 12ft by 8ft By 9ft 6” Tall. Some Racking fitted. Average condition £950 % Shaun 07850 978188 C5417 KING Hiab type Crane mounted on all steel strong subframe last used to fit into rear of grain trailer chassis (used on mono 10 tonne), easily mounts/dismounts, hydraulic stabiliser legs, spool valve controls to one side, push out last section with hook lifts 1/2 tonne plus at full stretch, long hoses to connect to tractor hydraulics, swivels approx 300 degrees, easily adapts to fit other operations Good condition £1,295 % Chris C 01926 338639 S7069 MIGTRONIC Automig 250 Mig welder, 3 phase, 250 amp, c\w sound welding nozzle & cables. Good condition £125 % Shaun 07850 978188 C6646 DANLINE Brushmate Rotary Brush/Sweeper, 3 point tractor hitch to fit front or rear linkage, pto drive to good 18” diameter nylon & wire brush 6’ wide, swivel head allows left & right angling, built in water tank for use as dust suppression, caster wheels to assist level working Good condition £1,250 % Chris C 01926 338639

F3552 PALLET RACKING Pallet racking for internal vertical storage.Seven bays of 2.2m width and 2m depth and four shelves high Very Good condition % 07503 531889 S7359 1996 FARM 2000 HT 70 Boiler Biomass Burner for Straw & wood. 4ft by 6ft chamber sound. 5 Sections of 4ft lined stainless steel chimney.Clean tidy boiler ready to use Very Good condition £2,500 % Shaun 07850 978188 F3583 ZAGAHOYO Tractor mounted post hole borer with 2 augers 30cm & 10cm.

Good condition £700 % 07503 531889 C6641 DIVERSIFICATION Opportunity Pet Cremator/Incinerator made by J G Shelton & Co, installed new in 2000 and used in commercial animal cremation business. Capacity up to 50kg/hr using diesel fuel (28 sec) and 3 phase electrics, Fully compliant free standing unit with footprint approx 10’6” x 6’, chamber size 4’6” x 2’6” and fitted with sluice gate type access door. Manual recording system, full control panel & uses small compressor for air control, twin burners, side fans, fire brick furnace, full vertical flue to outside. Hand type ashes grinder. All in working order. Very Good condition poa % Chris C 01926 338639 C6917 HYDROVANE Compressor trailed mobile unit fitted twin cylinder Deutz air cooled diesel engine driving Aerzed compressor, 24cfm at 9 bar, grp lift up cover, 155/80R13 tyres, ring hitch, lights, hose, electric start, working machine blows light mist of oil with air (compressor needs attention) Average condition £500 % Chris C 01926 338639 F3616 10 Numbered assorted ducting to match the evaporator units. Alloy construction 3’x3’ dimension. Can be sold as individual lots Good condition £250 % 07503 531889 S7136 GOVERNESS Cart 2 wheel pony cart. Rear access c\w shafts Good condition % Shaun 07850 978188 F3643 VARIOUS Olimex Deflor leaf strimmer, single phase elctric motor. £60-70 ono.

DWS Single cardboard box maker £50-60 ono. 100 potato chitting boxes £2.00 each. 3x Single wheel Geest type wheel barrows £25 each Average condition % 07503 531889 C7143 GENERATOR PTO driven Magnate MK2 model 20Kva, 3 phase free standing unit can be bolted down, includes pto shaft & speed warning light, operator handbook, currently operating at both three & single phase through wall mounted changeover switch which is available at extra cost Good condition £495 % Chris C 01926 338639 F3621 Quantity of green plastic fruit trays 30x60x20cm Good condition £325 o.n.o. % 07503 531889 S6518 MABE Cardboard Baler 3phase Hydraulic powered press to compress packaging etc. Industrial stationary type Good condition £7,000 % Shaun 07850 978188 C6721 SWIFT Challenger 470/2SE Touring Caravan, 2 berth single axle 4.7m long fully fitted with shower & built in cassette WC, double glazed windows, electric & gas appliances including water heater, room heater, hob & oven, fridge etc. recent new 12 volt battery & water pump, all good tyres with new spare, mains elec hook up lead, Calor & Propane regulators, water & waste containers tow hitch cover lock. Quality caravan with lots of storage space suit student or as a holiday tourer, includes awning Good condition £1,150 % Chris C 01926 338639 S6875 100 Kva Cabinet installed generator with John Deere 140 HP diesel engine. 3 phase. Good condition £6,500 % Shaun 07850 978188 F3573 1996 COMMANDO Pressure washer.

396Hrs Single axle barrow type. Lister-Petter single cylinder diesel engine air-cooled, electric start. 120’ of hose, chemical induction pipe. Detergent & wash lance. New pistons recently. Very Good condition £1,900 % 07503 531889 S7208 PTO Drive Unit Powered by 3 phase 15 Kva Electric motor. 540 PTO Output shaft From Gearbox. Suitable for fixed installation of Machine. Very Good condition % Shaun 07850 978188 F3549 VARIOUS Storage tanks/workshop Steel oil tanks square 250/300 gallon would suit waste oil storage. 2000gallon upright heavy duty circular steel tank with rubber lining, could be used for liquid fert or acid.

Mains powered bench grinder with two wheels. Aluminium tubular air ducting 6’ sections plus clamps, bends & short sections.

12volt Electric powered pedestrian controlled forklift 1000Kg lift capacity. Grain elevator belt & cup type 30’ with tensioners. Steel gates with clips, springs and hangers various sizes 6’-16’. Upright posts to suit available. Average condition p.o.a. % 07503 531889 S7266 2011 GLEN FARROW GF 125 Biomass Boiler High Effiecency boiler Suitable for Burning Straw and timber. C\w Heat exchanger, header tank, Black Stainless steel chimney and controllers. External size Appx 7ft long by 5 ft Wide by 7 ft tall. Good condition POA % Shaun 07850 978188

27

MUCK & SLURRY EQUIPMENT

S6682 SLURRY Stirrer PTO driven type c\w cat 1/2 linkage to mount on tractor. Appx 14 ft long. Soild and straight for age Good condition £375 % Shaun 07850 978188

28

PLOUGHS

S6421 1996 NAUD RX3 - 09 + 1 3 + 1 (4) 14” Furrow reversible plough, 38” point to point, 29” underbeam, Original digger bodies still very good, manure skims & depth wheel.

Very Good condition £2,900 % Shaun 07850 978188 S7238 LEMKIN DLX 120 4 Furrow Autoreset Reversible plough. Fitted Slatted Bodies and manure skim. Good rubber tyred depth wheel. Good condition % Shaun 07850 978188 F3622 DOWDSWELL DP7C 4 Furrow reversible plough. Fully mounted 14” furrows, manual width adjustment. Good wearing metal on points and shins. Disc cutter on rear furrow and rubber tyre depth wheel. Good condition £1,600 % 07503 531889 S7296 1997 DOWDESWELL DP 100S 3Plus 1 (4) furrow reversible plough, Manual furrow width adjustment, DD Bodies on good frogs Manure skims, 7 - 12 depth wheel. Good condition £1,750 % Shaun 07850 978188 C6995 KVERNELAND LB85/240 Reversible 5 furrow (4+1) plough, hydraulic variwidth model with rear disc coulters & number 8 bodies with tail pieces, 240 horsepower headstock, full set skims & trashboards, 85cm point to point & 70cm underbeam clearances, rubber tyred depth wheel, all straight plough soon requiring metalwork on skimmers & landsides + points, bodies good but one thinning Good condition £4,295 % Chris C 01926 338639 S5202 DOWDESWELL Furrow press Standard Double ring press without arm but in very sound order. Suit 5 x 14” furrows. 30 degree 650mm Rings 200mm apart. Good condition £425 % Shaun 07850 978188 S6491 1997 DOWDEWELL Furrow Press 2 rows of 30 degree cast rings appx 100” working width. Completely rebulit last year at a cost exeeding £2000 Very Good condition £1,000 % Shaun 07850 978188

• See also the wanted section and read the buying/selling details before calling

38 NOVEMBER 2014 F3570 VOGEL AND NOOT 1995. 3 furrow mounted reversible plough. Slated bodies.

Manual front furrow adjustment. All new points & bolts and new skimmer points & bolts. New discs & bearings and new wheel bearings. Very Good condition £2,750 o.n.o. % 07503 531889 S5263 DOWDESWELL DP1 5 Furrow reversible, Good SCN bodies, no skims but fitted trashboards and no discs. Straight on land single offset plough Good condition £950 % Shaun 07850 978188 F3595 LEMKEN 6 Furrow fully mounted conventional plough. 12” furrows. Plenty of wearing metal left barely used. Average condition £600 % 07503 531889 S6311 2000 NAUD 8 Furrow Semi mounted Hydraulic Autoreset plough. Pair of 400/65 22.5 depth tyres after 5th furrow. Good long DD type bodies, Manure skims and Claydon furrow cracker. Cat 3 drawshaft. Suit up to 300HP. Manual varaible width. Good condition £8,750 % Shaun 07850 978188 S7336 1992 LEMKIN DL 140 4 Plus 1 (5) Furrow reversible, fitted manure skins and reasonably good CD bodies on sound frogs.

Good 10/80 - 12 Depth Wheel. Cat 3 cross shaft. Usfull plough Good condition £2,500 % Shaun 07850 978188 F3598 CLAYDON Furrow cracker to fit 6 furrow plough. Mounting brackets Hydraulicly controlled Average condition £650 % 07503 531889 C7127 COUSINS Furrow Press to match a 5 x 14” plough, twin axle set of 700mm diameter cast rings with good cleaner chains, 3 point hitch for transport, including hydraulic operated press arm & brackets to fit a Dowdeswell reversible plough (DP7 model) Good condition £650 % Chris C 01926 338639 S7262 RABE Harrier KGD V80 - 35 4 plus 1 (5) Furrow reversible fitted Good Conti 14” Slatted bodies. Little used c\w quantity of spare metal. Plus rabe 2.4M 30 degree double 68cm ring press in good order c\w Fork carriable frame. Good condition £3,000 % Shaun 07850 978188 S6950 JOHN H RUNDLE Double ring Press 54” Wide 14 Ring press. Each ring 26” (30 degree) Comes complete with linkage to carry plus simple plough arm Very Good condition £375 % Shaun 07850 978188 S7354 2005 LEMKIN Vari Opel 7 Hydraulic auto reset 5 furrow plough with, hydraulic front furrow manual vari width, C40 bodies very good metal. Very Good condition £7,750 % Shaun 07850 978188 C6820 DOWDESWELL DP7E reversible 5 furrow (4+1) plough, fully refurbished approx 2005/6, UCN adjustable pitch type bodies, rear disc coulters, full set square shank skimmers, 12” furrow width & 34” point to point clearance, hydraulic front furrow width adjustment, later type large depth wheel, all wings & points good, mouldboard metal starting to thin at ends but life left in them, good paintwork all straight plough with no welds Very Good condition £2,600 % Chris C 01926 338639 S7067 LYNX Double ring press C\w Lemkin Hydraulic release press arm (as new). 27” 30 degree rings. 8ft wide with baskets of rings to add weight. Very Good condition % Shaun 07850 978188 S7086 3 Furrow Conventional plough with modified headstock to offset for ploughing out hedgebottoms.2 discs, 10 -12” furrows Good condition % Shaun 07850 978188 S7369 DOWDESWELL DP 1 6 Furrow double offset reversible plough suitable for Large Crawler Tractor to plough on land Good condition % Shaun 07850 978188 S7348 GREGOIRE BESSON

Trailed On Land 7 Furrow Reversible double offset plough. 2 - 16/70 - 20 tyres to carry between 4th & 5th furrows plus small depth wheels fron & back. Good metal throughoout & no welds.1150mm point to point, 700mm underbeam Very Good condition £6,000 % Shaun 07850 978188 C7064 DOWDESWELL Furrow Press 11-12 model last used behind 6 furrow 14” plough, 670mm diameter sharp angle press rings with heavy duty cleaner chains in 2 rows, 1988 model can adapt with spacers to suit different plough width Average condition £695 % Chris C 01926 338639 S7204 KVERNELAND PB 8 Semi Mounted autoreset plough. 14” No 8 Bodies with good metal( Some new) Cat 3 cross shaft. 400/60 - 15.5 Depth /transport wheel. Very Good condition £4,500 % Shaun 07850 978188 F3601 RANSOMES Trailed Furrow press to fit 4 furrow plough. Comes with cleaning chains Average condition £400 % 07503 531889 C6339 DOWDESWELL Furrow Press adjustable model currently set to follow 5 x 14” furrow plough, 700mm diameter 30 degree cast press rings 11 at front & 10 at rear (spare average ring to make 22) in 88” wide frame, cleaner chains, 3 point hitch frame for transport, hardwood bearings model which have been replaced with genuine type Average condition £750 % Chris C 01926 338639

29

POTATO HARVESTERS & PLANTERS

S7064 STANDEN H240 Big Boy planter 2 Row Automated Belt fed planter with hydraulic depth on 10/80 - 12 tyres. Hood Coverer. Good condition % Shaun 07850 978188 S7046 GRIMME Bedtiller To prepare 2 Rows c\w Grimme toolbars and Ridging bodies.Made by Howard substantial machine.

Excellent condition £3,000 % Shaun 07850 978188 C6986 GRIMME QC Continental 2 row manned potato harvester, 1988 model with lane & steering adjustment, front diablos with discs & split shares, twin continental webs (45 & 35mm) feed to set 4 star cleaners, haulm & clod fingers across webs, cross conveyor to picking off module above rear of machine feeds to cart elevator, in cab controls, adjustable axles to suit row widths, small farm use only dry stored Good condition £1,850 % Chris C 01926 338639 S7080 FERRI F200 Straw chopper or Potato topper as configured. 2m Breed.

540 rpm. Very Straight. Rear mounted.

Good condition £700 % Shaun 07850 978188 F3593 GRIMME Muti-Sep Cleaner 4 pairs of cleaning rollers and a haulm extractor roller. Hydraulicly driven and controlled from tractor cab. The rollers can be adjusted for height, distance apart, speed & rotation. The whole unit can be angled as well. Gives sample quality fine tuning for conditions without increasing damage. Very Good condition £7,000 % 07503 531889

C7072 GRIMME Variant DL1700 manned potato harvester, 1995 model with split front shares & discs, half diablos with pressure sensing, steering, levelling & lane adjuster.

Pto drive to hydraulic pump & oil tank, first 45 & second 40mm continental webs, adjustable haulm/clod fingers, set 2 star cleaners after first web & full set dahlman rollers prior to picking off area. Canopy covered rear 4 man picking off facility from rubber sleeved full width web, folding cart elevator & windrowing option from discharge supply elevator, 16/70-20 tyres. Machine has worked on earlies this season & comes with spare 55mm first main web, nice straight well maintained harvester with all good paintwork Good condition £4,750 % Chris C 01926 338639 S6028 SCOTT GRIMME QRS 2 Row Unmanned harvester, Full diablos, 4 discs, 2 2 piece shares, clod fingers, Ist web elecric agiatation, Rear wheel steering Dahlman rollers unmarked. Electric in cab controls.

Very Good condition £2,300 % Shaun 07850 978188 S7167 2003 GRIMME Wavy Webb Kit For GZ Harvester, c\w All steel panels a nd rollers. Uses standard web so none inclused.

Good condition £1,200 % Shaun 07850 978188 S6943 1988 GRIMME Q Continental 2 Row unmanned harvester with recent 50mm main web, Steering axle and drawwbar. Star separation, 800mm cart elevator. Average condition £1,400 % Shaun 07850 978188 C6782 GRIMME GB Two row trailed harvester, 36” wide continental webs with scrubber, split front shares, steering ram, adjustable axle, high top picking off table under canopy with frame, long cart elevator slews over front of machine for transport. Unused & dry stored for a few years so suitable refurb or parts. Also Grimme Continental 89 two row harvester with front diablos & twin disc system, continental webs & clod fingers, treaded tyres, fold up cart elevator - again suitable parts or refurb poa % Chris C 01926 338639 C6985 HASSIA GLB 2 row potato planter in Bamlett colours, twin treaded tyres drive wheels, front openers with disc formers, belt agitators, tipping hopper, currently set at 36” but all adjustable. Also - Keyag Squire Bedformer, linkage mounted 8’ wide box section frame, fold out heavy markers, large adjustable forming bodies, centre stabiliser blade priced at £495 Good condition £465 % Chris C 01926 338639 F3471 1996 STANDEN H200 Big Boy Potato Planter Type BB2, 2 row planter can be used for ridges or bed system. Bulk hopper and cup type feeders. Electric controls and ridging bodies. Machine has done very little work, is in very good condition and stored under cover. Very Good condition £2,950 % 07503 531889 S6856 REEKIE Cleanflow 2000M4 2 Row unmanned hravester with Cart elevator replaced with a 1.8m By 0.8m Conveyer to Windrow crop 2 rows across. 40mm first & 2nd webs. Good condition £2,000 % Shaun 07850 978188 F3638 STANDEN Big Boy H300 2004. Potato Planter 3row. Stainless steel shares and soil retaining plates. Screw type individual electronic screw type Monceren applicators.

Shaping hood. Good belts and cups Very Good condition £3,950 % 07503 531889 S6988 NOBEL “S” Plantmaster 2 Row planter on cage wheels with disc coverers, suitable for a variety of planting jobs. Old but all there Average condition Offers % Shaun 07850 978188 F3543 STANDEN PEARSON T3 3 Row Harvesting System. Walterscheid PTO shaft.

Adjustable Diablo rollers and hydraulic adjustment of the digger to main web step and main web agitation. Water cleaning system and “Scotts” rollers. Powered land wheels and hydraulic folding for road transport. High output machine with minimal crop damage and very clean samples. Priced to sell Excellent condition £45,000 % 07503 531889 S7084 GRIMME Bagging Set for Allrounder Full rig including Bagging conveyer part web, part roller and short elevator. Fiscbein Fixed head hydraulic driven stitcher. 1992 Pearson nu pack No 3 bagger. Varous fittings. Good condition % Shaun 07850 978188 S6820 2010 AVR Rafale Front mounted Potato topper c\w RH outlet cross conveyer.

Choice of 2 Very Good condition % Shaun 07850 978188 F3561 GRIMME Variant 1700 Series 1993.

Potato harvester DL. 2 row with diablos. Low ground pressure tyres, steering axle and swan neck elevator. Full electronic control box. Last used in 2011. Good condition £4,500 % 07503 531889 F3614 GARFORD 4x Potato harvester diablos built to order. Come with fixing brackets. New condition £5,000 % 07503 531889 F3639 GRIMME GL32B Potato planter. 2 row Tipping hopper with cover. Electronic Monceren applicator, cushioned cups good belts. Shaping hood and soil retention plates in good order. Good condition £2,850 % 07503 531889 S6136 KEYAG GRUSE VL18 BM 2 row mounted automatic planter. Fitted Rigid Bodies electric monitor, Cup inserts, Coulter wheels. 10/80 -12 wheels Good condition £950 % Shaun 07850 978188 S7158 2000 REEKIE Netago RT170 - S 2 Row Bed tiller in tidy order possibly inc rear hydarulic linkage midified for Hyd top link Good condition £1,900 % Shaun 07850 978188 F3600 RIDGERUNNER 4 Row ridge roller front mounted. Tyres 80% tread. Mounting points for additional weights. Good condition £1,300 % 07503 531889

30

POTATO/BULB GRADERS & EQUIP

S7341 DOWNS Conveyer 10ft long by 2ft wide. Continental web, 37mm to extract soil.

C\w 3 phase motor but no legs Good condition £350 % Shaun 07850 978188 S7223 1995 PEARSON 3.7m Rotaforma Bed Tiller, 1000 RPM, Tidy order includes a new set of blades and Good Ridging Bodies. Good condition % Shaun 07850 978188 S6728 2006 WELVENT 50 by 30 Ft Cold Store, prefabriacted into shed so would remove. Appx 8ft 6” High c\w 2 Outlet in store Cooler and Welvent refrigeration unit inc Digital cotrol panel etc.. Store doors and barriers also available. Very Good condition £8,500 % Shaun 07850 978188 C6984 GRADING LINE with Hopper 3 tonne capacity steel receiving hopper 11’ x 8’ with 3’9” variable speed bottom belt feeding 24” inclined cleaning elevator to twin rotary screen 36” wide grader module with 6’ long roller inspection table, twin cross conveyors under, Tong mechanical single head bag weigher, All 3 phase except weigher, currently on raised stands to allow operator platforms each side, various size screens. Also Walthambury 240 mechanical twin head bag weigher, 3 phase with main & trickle belts priced at £495. Plus - Wytrac slewing in/out of store rubber belt elevator, receiving hopper, cleaning section with short cross conveyor at end of primary section, 20’ second adjustable throw second section, old but working - priced at £650 Good condition £2,250 % Chris C 01926 338639

F3609 HERBERT TBFE Potato handling line & box filler. Consists of roller table 2.7x1m, Swan neck elevator & 1T box filler.

3 phase electric motors and hydraulic box lift and lower controlled by pressure sensor.

Roller table has sprayer mounting brackerts Average condition £3,995 % 07503 531889 S7018 Elevating Conveyer Fitted 18” Continental web to clean as it elevates. Appx 10ft long. Fitted 3phase Varible speed drive Average condition £450 % Shaun 07850 978188 F3436 HERBERT Rubber belt elevators x2.

One 4m overall length including adjustable swan neck. 2m max drop, 750mm wide, 3 phase. Other, 2.5m long, 1.5m drop, 650mm wide belt and single phase. Good condition £800 % 07503 531889 S7014 1991 GRIMME KSA 1500 Front Mounted Flail potato topper, C\w cross conveyer discharge belt and 2 depth wheels. Set for 2 - 34” Rows. Good condition £1,500 % Shaun 07850 978188 C7076 TONG Rotary Screen 24” wide potato grader with free standing feed hopper, single phase electric motor drive. Rubber belt inclined feed elevator to 50mm screen, plastic roller inspection table with end bag clamps, flat belt cross conveyor, all mobile on wheels.

Steel sided hopper on adjustable height legs with bottom cleaning trace web feeds grader filled with loader or box tippler Average condition £1,495 % Chris C 01926 338639 S7019 TONG Elevating Conveyer, 18” Cleated belt at 45 degrees (2” cleats) Discharge appx 55” High. Single phase variable speed Good condition £500 % Shaun 07850 978188 S7221 2003 JONES Triple Bed Tiller c\w 3 Heads 64” with tiller blades. Fitted Rear toolbar and hardly used bodies with 2 wheels.

Hood Coverer also available. Very tidy machine not overused. Very Good condition £3,950 % Shaun 07850 978188 S7257 2001 HK TIMBERS Potato Boxes 5ft by 47” by 42” tall( 37” Internally. Up to a 1000 available in reasonable condition. Suit a variety of jobs. Well made boxes with rounded corners & metal braces. Good condition £16 each % Shaun 07850 978188 S5246 2000 TONG Flat Belt Conveyer Choice avaiable Inc 300mm 3 - 6m long.

550mm by 2.6m. 650mm by 2.8m, 3.8m, 4.5m & 6.2m. 700mm by 3 & 3.6m. All with 3ph motors, some with legs. Very Good condition % Shaun 07850 978188 S6075 TONG Caretaker 48 48” Inline grader c\w own hopper, 5 rows of cleaning stars with own cross conveyer, Single screen grader with own 3ft wide cross conveyer.

Roller table with soil extraction conveyer underneath. 3 Phase variable speed, rewired recently Good condition % Shaun 07850 978188 S7013 H K TIMBERS Scotch 1 Ton Potato Boxes, 6ft by 47” by 37.5”,palletised, 6 Board 1” gap, Straight and tidy, good enough to stack 7 high. Very Good condition £35 each % Shaun 07850 978188 F3411 NICHOLSON SYSTEMS Rubber Coveyors 5m Picking-Off table with a 2.5m trash conveyor. 3ph variable speed & reversible motors. All mounted on a low trailer with fully enclosed wooden shelter for staff.

Good condition £1,000 o.n.o. % 07503 531889 S7022 PEAL 900 Box Filler Twin Head, automated, 3 phase filler. Converted to fill 5 or 6ft wide boxes. Tidy for age. Optional Feed conveyer 1m wide by 1.4m long on adjustable legs (3ph) adds £500 Good condition £1,450 % Shaun 07850 978188 S7052 TONG 24” 2 Screen Inline Grader c\w cleated belt feed, 2 Screen graders with cross conveyers under, roller table with light over and separate variable speed. 3 phase, Various screens Very Good condition % Shaun 07850 978188 F3617 Quantity of fluorescent light fittings for chitting seed potatos 9’ long Good condition £250 o.n.o. % 07503 531889 S7340 TONG Roller Table 3ft By 6ft Long. 3 phase topdrive motor. Adjustable legs Good condition % Shaun 07850 978188

31

POWER HARROWS

S7237 2000 KUHN HR 4003 4M Power harrow c\w Quick release tines & packer rollers Good condition % Shaun 07850 978188 C6972 KUHN HR302M power harrow, 3m wide 1993 model 1000 pto drive fitted twin adjustable clod boards (front & rear), good 7” long ‘L’ blades & soil side plates, rear 450mm diameter steel packer roller with set scrapers on pin & hole height adjustment. On farm from new, main gearbox (through pto type) has gear backlash chatter but all in full working order. Good condition £1,995 % Chris C 01926 338639 S7337 1989 KUHN HR 3501D 3.5M Power harrow, fitted packer rolller & 80% tines. Rotors Tight & dry. 1000 rpm PTO & large gearbox. Good condition £1,650 % Shaun 07850 978188 S7368 MF 768 4M Power Harrow, 1000 rpm PTO Very goood Blades. Standard open centre crumbler. Nice & dry Good condition £1,700 % Shaun 07850 978188 C7009 HOWARD Rotavator 80 inch E series model with twin adjustable depth wheels fitted rubber tyres, refurbished in last few years & done little work since. paintwork, pto, blades, guarding etc. all good. Linkage mounted with 540 pto drive to Selectatilth gearbox, adjustable height rear hood on twin chain adjusters Very Good condition £1,675 % Chris C 01926 338639 S7154 LELY 3M Professional Harrow c\w Through shaft gearbox and rear linkage. Fitted Flexicoil. Hour clock shoing 525 hours.

Good Paintwork Good condition £1,200 % Shaun 07850 978188

32

SILOS & STORAGE

C6591 BOYTHORPE Harvestore wet grain silo, 1982 model 4 rings high (55” high each ring, 7 rings circumference (each ring 106” long, single bolted). Can be professionaly dismantled if required Good condition £895 % Chris C 01926 338639 C7125 VICTORIA

Outdoor tapered discharge round grain silo, 35 tonne capacity free standing 3.9m diameter on legs, galvanised corrugated steel panels, top fill, inspection door, bottom opening slide with auger boot, all very sound & used as wet grain bin to drier £1,995 % Chris C 01926 338639 S6815 SIMPLEX Drying Bins 12 Inside open top perforated 9ft 6” Diameter drying silos. Each with Central Drying tubes and connections. Buyer to dimantle and remove Very Good condition Offers % Shaun 07850 978188

C7097 HOWARD Harvestore grain type round tower silo model 80/25 with fill & discharge systems, 16 section plus double bolted base ring with entry hatches from full length vertical ladder every 10’, 860 tonne capacity in blue enamel finish 80 ft high & 25 ft diameter. Nuero BG260 grain blower with pipework, 3 phase electric 22/25kw motor drive with starter & cell wheel hopper feed micro switch controlled plus Weevil exterminator control unit. Comefri RAS low volume high impedence centrifugal conditioning fan plus ducting, 3 phase 5.5kw drive & cable.

Astwell 4.5” straight auger & silo discharge auger system fits in base of silo (currently supplies Fyson rubber belt elevator. All sold as currently erected on farm. Very Good condition £8,250 % Chris C 01926 338639

33

SPRAYERS

C6957 CLEANACRES Model 185 mounted 12m hydraulic folding sprayer, tubular alloy booms fold as single section from backframe, boom tilt ram, hyd raise & lower, 3 section in cab control, induction hopper, Airtec system with single nozzles at 50cm spacing, 3 cylinder pto drive pump & gearbox to airtec system, self fill facility for 830 litre (185 gallon) plastic tank, Bout marker. Tidy straight sprayer for age with demount stands, requires 2 x da spool valves + 1 x sa supply Good condition £1,195 % Chris C 01926 338639 S6026 LELY 400 Litre Front mounted tank, c\w hyd driven pump, electrically switched.

Brackets to fit MF front weight frame. Good condition % Shaun 07850 978188 S6328 24m Demount unit Suit MB trac or similar. Hyd folding & raise / lower. 2000 litre GRP tank. Single stainless lines.In cab controls. Very Straight Good condition Offers % Shaun 07850 978188 S7331 1994 CHAVIOT 2000 self Propelled 2000 Litre 24m Sprayer. Landrover 300 Tdi Engine 4837 hours.Air Con Cab with RDS Ratemaster 200 .3 Sets of wheels Inc 90% 16.9 - 30 rears, 80% 48 x 31 x 20 Terras.

40% 12.5 - 15.3 Fronts & Alliance 230/95 R48 Rears 80%. with 230/95 R 32 front rocrops. Washout tank, Induction bowl, clothing locker & Demount legs. Good condition £8,000 % Shaun 07850 978188 C6947 ALLMAN Claxton mounted 8 metre sprayer, 410 litres plastic tank, manual fold 3 section boom on bolted height adjust backframe, manual controls on machine, 2 cylinder pto drive pump, kept dry stored suit grass land or smallholding/veg grower Good condition £475 % Chris C 01926 338639 C7106 CLEANACRES

24 Metre mounted Airtec sprayer, year 2000 model purchased on farm in 2005 fully refurbished with new airtec etc. 1330 litre main plastic tank with clean water tank below, stainless induction hopper, pto drive 6 cylinder pump plus gearbox to Airtec pump, bout marker, single plastic lines on steel boom with 4 section in cab control & RDS flow meter sytem, single spool valve supply from tractor, all good straight booms with tilt facilty (Knight cropsaver booms). Includes front tank 830 litre capacity used as clean water carrier only fits to front weight farme. Sprayer MOT to 9/4/15, service history & good quantity of spare parts. Very well maintained machine all in full working order Very Good condition £5,250 % Chris C 01926 338639 C6898 ALLMAN 625 mounted 12 metre 625 litre sprayer, manual fold boom with winch height backframe, manual controls (3 section), single nozzles on plastic lines, good pto drive to 3 cylinder pump, hand lance & long hose fits to valve chest, quantity spares etc. Stored inside unused for a while but fully drained & antifreezed. Currently used as a 6m unit, boom extensions easily refitted.

Good condition £550 % Chris C 01926 338639 C6776 CLEANACRES Atlas self propelled sprayer, 4wd/4ws 1995/6 model with Perkins 170hp engine & full hydrostatic transmission, terra tyres size 48x25.00-20 with 35-40% good tread 8 stud fitting plus set 4 rowcrop wheels & tyres size 12.4R32, 2500 litre tank.

Contractor specification 24m boom (joystick control) will also spray at 12, 18 & 20 metres, single nozzles on stainless lines, boom tilt ram, hyd driven 6 cylinder sprayer pump.

RDS Landquip RS 8000 in cab spray controller with flow meter. Hydraulic axle suspension with oil tank at front of aircon cab. In full working order can have 12 months test if required Good condition £7,450 % Chris C 01926 338639 C7070 CLEANACRES Trailed Tracker 20 metre sprayer, 1994 model in all very straight order, 2300 litre plastic tank with induction hopper & operator clean water tank, MOT to March 2015, all steel hydraulic fold boom with good paintwork & no welds, recent new plastic single lines (non Airtec) fitted Hypro single nozzles, 4 cylinder pto drive pump mounted on tractor linkage tracking drawbar, Pony Flow meter on self fill coupling, Bout marker, boom tilt ram, 4 section controllers with in-cab unit, hydraulic brakes on 6 stud axle, as new 13.6-36 tyres on silver wheels plus set very good 23.1R26 tyres on wheels, road lights. Well maintained machine been replaced by 24m self propelled Very Good condition £5,750 % Chris C 01926 338639 S7026 CLEANACRES Trailed 12m Sprayer with 1400 litre tank. Galvanised framework.

Ramsay Air control system. Single jets. AR 160 4 cylinder pump. 11.5/80 - 15.5 tyres. Average condition £800 % Shaun 07850 978188 S7323 ALLMAN 1200 Litre Mounted 18M Sprayer, c\w Full in cab electric controls. Just Had its test so ready to go. Good condition £1,800 % Shaun 07850 978188 C6989 RANSOMES Hawk 700 mounted 12 metre sprayer, manual fold boom, 700 litre plastic tank, 3 cylinder pto drive pump, in working order, has been used on Logic atv chassis but fits straight on to a tractor Average condition £345 % Chris C 01926 338639 F3656 LELY Front mounted spray tank 1000Litres. Hydraulicly driven ACE centrifugal pump 150L/min. Valves and pipe connectors to couple to a rear tank. Average condition £600 % 07503 531889 S7350 HARDI Demount 850 Litre 20m sprayer ex Agribuggy. Hydraulic Lift & Folding, Chemical induction bowl. 6 Cylinder Hardi Pump and full 4 section hardi elctric shut offs. Steel Main Boom frame with alloy outers Good condition £700 % Shaun 07850 978188 F3649 ALLMAN 925 12m mounted sprayer.

925L tank. Manual height adjustment and boom fold. Full set of nozels and good straight booms. No MOT Average condition £300 % 07503 531889

WWW.WRIGHTSREGISTER.COM

S7225 2005 KNIGHT 1835 Self Propelled 3500 Litre, 12/24m Sprayer only 4500 hours mostly owner driven from new.Comes with Auto boom height control, Airtech and conventional Spray sytsems, Laser adgitation, RDS Magic Box 2 Controls Induction bowl Internal and external washing sytems.

Perkins 174 HP 6 cyl engine. 70% Rocrops 320/85 R32 & 70% 540/65 R24 Track grip floatation tyres Very Good condition £39,500 % Shaun 07850 978188 S7317 1991 GEM 2000 Rigid Drawbar trailed 2000 litre sprayer c\w hydraulic raising and folding 20m booms. 6 cylinder pump, Stainless steel induction bowl, Washout tank, Single lines & Jets. Electric in cab shutoffs.on 23/95 - 36 tyres, plus flotation tyres. Years MOT Good condition £2,500 % Shaun 07850 978188 C7132 KNIGHT Laser mounted 24m sprayer, 2004 model with 1200 litre main tank plus clean water tank above, all steel very straight hydraulic folding booms with single stainless lines & single nozzles, 4 section in-cab boom control with split boom section at rear to be able to spray at 12m, boom tilt ram, stainless induction hopper, 6 cylinder pto drive pump, Ramsey pressure maintain system, self fill & big filters, road lights, MOT to 4/3/15, de mount legs. Complete with low level Knight 1000 litre plastic front tank for tractor front linkage mounting, hydraulic drive transfer pump & filler coupling Good condition £6,495 % Chris C 01926 338639 S7249 2008 AMAZONE UF 1201 Mounted 24m close folding Sprayer (folds to 2.3m wide). 1300 litres plus washout tank and induction bowl. Multijet nozzle holders. Fitted 6 cylinder pump. Seen very little use Excellent condition POA % Shaun 07850 978188 S6758 LANCASTER 3000 Litre Self Propelled 24m sprayer, recent RDS Delta 341 Control box, Air Con Cab, hydro drive. Low houred John Deere 200 plus HP engine.

Good Hyd folding booms, Induction bowl and washout tank. As New 18.4 - 38 tyres plus rocrops 270/95 R 48 rocrops Good condition £9,900 % Shaun 07850 978188 S7357 2011 SPRAYRANGER 250 2500 Litre Low Ground Pressure 24m Sprayer ,very low hours fitted Trimble CFX 750 GPS control system and closed circuit boom circulation.

Plus Stainless Steel main tank, 200 litre clean water tank and induction bowl. Quin jets on single lines. Ford Engine, 50K Auto box. 560/60 - R22.5 terras & 9.5 - 44 Rocrops Excellent condition £52,500 % Shaun 07850 978188 S7373 1996 CLAYTON 4120 Sprayer 4wd /4ws Unit With John Deere Engine done 6900 hours, Michelin 540/65 R28 Tyres all 70%. Teejet 844 spray control unit. Chafer 2500 Litre Stainless Tank sprayer with 24m HiLine booms, 2 stainless lines, Induction bowl, Clean water tank. Tested ready for work Good condition £14,500 % Shaun 07850 978188 C6870 BERTHOUD Self Propelled sprayer, 4000 litre plastic demount tank on Thwaites Alldrive 4wd/4ws chassis, converted in 1993 with 24m hydraulic folding boom, Ford 6 cylinder power unit, Evrard sprayer pump gound speed related, centrifugal rear mounted hyd drive fast fill pump, 4 section boom control can spray at 12m, tilt ram, triple nozzles, Trelleborg 421 twin 600/65-26.5 tyres (all 50-60% good tread) on 8 stud axles plus 13.6-38 set narrow wheels. Forward control cab, manual gearbox. Currently uses centreline GPS control system. Drives but ready for a new transmission clutch & has leaking axle final drives. Will make good value machine when tidied up Average condition £4,995 % Chris C 01926 338639 S7309 HOUSHAM Sprint 2000 litre Self propelled 24m Sprayer , Isuzu engine 8350 hours , tested , Air conditioned cab with RDS Control box .12.4 - 32 Rocrops and42 x 25 x 20 Floatation tyres. Well maintained , lightweight machine used on small acreage.

Good condition TBA % Shaun 07850 978188 C6592 STAINLESS Steel 3000 litre square profile sprayer tank, currently with steel 20 metre hydraulic folding Chafer rear boom fitted & part of pivot steer self propelled unit ex Ford tractor. Tractor not for sale but tank easily made into bowser or unit can be made into trailed sprayer with tracking steering rams, includes Teejet controller, induction hopper, triple nozzles on plastic lines, pto driven diaphragm pump & Pecson fill pump, rear mounted pelleter unit & 8 stud row crop wheels). Requires drawbar extending with ring hitch & boom removing for bowser use. Please phone for photos & details Good condition poa % Chris C 01926 338639 S7358 GEM 2000 Selftrak 2000 litre , 18m Trailed Sprayer . Fitted Electric in cab controls, hydraulic folding, Stainless induction bowl, Clean water tank , 8.3 - 32 Rocrops & wider tyres. Tidy Good condition £1,950 % Shaun 07850 978188 C7061 KNIGHT Trailed Tracker 2500 litre sprayer, 1996 model fitted 21m all steel boom plus set 20m breakback sections, stainless lines & single nozzles, Ramsey pressure maintain facility with 6 cylinder pto driven pump, tracking drawbar fits to tractor lower links, clean water tank part of main white plastic tank, induction hopper, hyd fold boom with tilt ram, MOT to 11/14, demount legs, road lights, 9.5R24 tyres plus pair wheels fitted all very good BKT 12.4-36 tyres, in-cab 4 section boom controller Good condition £6,295 % Chris C 01926 338639 F3346 STOCKS Trailed Quad Bike Granular Applicator 12 x1meter Stocks Micro Meter applicators mounted on 12m folding boom on ATV trailed chassis. Applicator driven by Briggs and Stratton petrol engine. This unit has had very little use. Excellent condition £5,000 o.n.o. % 07503 531889 C6551 HARDI LHY 800 mounted 18m sprayer, 800 litre tank with 6 cylinder pto driven pump, manual controls on machine with 4 section boom control, hydraulic folding gull wing type boom fitted plastic lines & triple nozzle holders (one spray nozzle only fitted). Also demount sprayer &24m boom ex Fastrac & a 1000 litre Hardi plastic tank Average condition Offers % Chris C 01926 338639

34

SUBSOILERS

C7063 FLEXI COIL Flexi Form 300 linkage mounted 3 leg subsoiler, ‘V’ format heavy duty box section frame with rear fully adjustable for depth 600mm diameter solid coil with star cleaners, 1m legs have had replacement sections fitted, good winged feet.

Coil width 2.5m in 2.7m frame to operate at 3m working bouts. Well made machine in good order Very Good condition £1,925 % Chris C 01926 338639 S6764 FLATLIFT 5 leg Subsoiler 2 Bar frame with 5 swivel legs , 2 large steel wheels and flat bar type 4m packer at back . Act Frame 3.8m . Solid Tool Good condition £2,300 % Shaun 07850 978188 S7335 SIMBA Flatliner 500 Heavy Duty Vee Form 3.5m Subsoiler c\w 5 Prolift legs appx 30” long , hardsurfaced c\w good wings & points. Optional extra Sulky Drill box mounted on top for Incorperating seeds.

Very Good condition £6,500 % Shaun 07850 978188

C7133 WEAVING

Sublift mounted subsoiler fitted 5 x McConnel Shakaerator legs (additional 2 legs plus spares included to make 7 leg version if required) on box section 3m wide frame, legs are 48cm working depth with shins & standard points, pto shaker unit not used, rear maxi size steel toothed packer 650mm diameter 2.8m wide with scrapers - fitted with recent pair hydraulic depth adjuster rams Good condition £3,250 % Chris C 01926 338639 C5965 HAYLOCK 5 Leg mounted subsoiler, heavy duty linkage mounted 4m wide frame non folding, winged feet & front shins to legs with 2’3” clearance, all mounted in box section frame size 4” x 7”, rear flat bar crumbler roller 3.7m wide on pin & hole depth adjustment, 2 legs good & 3 getting thin at rear, needs big tractor to operate Average condition poa % Chris C 01926 338639 C6474 COUSINS Subsoiler 2 leg heavy duty model with 8”x4” box frame 3.5m wide, rear large diameter flat bar steel crumbler barrel 3.25m wide on screw depth adjusters, steel 8” wide 24” dia depth wheels fit to front of frame. Adjustable legs with good feet (no wings) & front shins, one very good the other part worn Good condition £1,395 % Chris C 01926 338639 S6990 2007 SUMO

Trio 3m Mounted machine with 6 Ultra low draft shearpin legs fitted with Delta winged points , Discs & 760mm Multipacker Very Good condition £9,750 % Shaun 07850 978188 C7121 MOULTON 3 Leg linkage mountedsubsoiler, 3m frame with angled adjustable height 3’ legs fitted winged feet & front shins, rear 9’ wide 450mm diameter steel packer with scrapers on screw height adjusters, outer rubber tyred removable depth wheels with all good tyres, legs at 3’ fixed spacing Good condition £1,250 % Chris C 01926 338639 S7302 RANSOMES C83B Subsoiler , 6” By 4” Frame with 2 Good fixed subsoil legs Good condition £375 % Shaun 07850 978188 S6877 SIMBA Flowking 3m subsoiler with 5 legs , Fitted packer with good scrapers. Average paintwork Good condition £3,500 % Shaun 07850 978188

35

TANKS

F3607 10,000Litre square tank. Measuring guage and hose fittings. No rust on seams or corners. Good condition £650 % 07503 531889 S7169 MILD STEEL 2000 Litre Deisel tank 6ft by 4ft by 5ft tall c\w Flexible pipe & gun used for Road diesel Excellent condition Offers % Shaun 07850 978188 F3619 DIESEL TANK 20,000L comes with meter and 240v pump. Good condition £6,250 % 07503 531889 F3608 3,000 Litre square steel tank. Good seams and corners Good condition £550 % 07503 531889 S6826 1987 ACRITE PIPEWORK LPG Tank 1 ton (1700 litre) Skid mounted LPG tank C\w George Meller single phase pump and baynet nozzle and pipe with shelter. Good condition £900 % Shaun 07850 978188 S7170 2004 HARLEQUIN 2700 ENV Bunded Fuel Station in plastic.C\w Top mounted 240V pump, pipe & nozzle. Just plugs into a 13 amp supply.Size 7ft by 6ft by 5ft 6” Good condition £800 % Shaun 07850 978188 F3620 DIESEL TANK 5,000 Litre comes with meter and 240v pump Good condition £3,250 % 07503 531889 C6943 WATER BOWSER made by Merrick Loggin, 1000 gallon capacity mild steel square sided construction, single 8 stud axle fitted 16.5R22.5 tyres & hyd brakes, ring hitch & shoe, side carrier boxes, top fill with front & rear discharge, road lights. Requires repair to base of tank Average condition £875 % Chris C 01926 338639 S6172 SCHNEIDER INDUSTRIES 1400 Litre LPG Tank, mounted on frame c\w single phase Smiths Electric pump with bayonet gun & pipe. Proper Rig Good condition £1,250 % Shaun 07850 978188 S6795 CHAFER 2000 Litre Trailed single axle spray bowser. 7.50 - 16 tyres, road lights, PTO driven Comma filler pump, Usefull Chemical store box on the back. Good condition % Shaun 07850 978188 C6959 DIESEL Bowser single axle towed by tractor, 500 gallon capacity round steel painted tank on chassis with twin screw jacks, top fill & 12 volt electric pump with hose & gun Good condition £425 % Chris C 01926 338639 S6992 MEULLER 4000 Litre Stainless Steel Bulk milk tank. Cylindrical like road tanker on short legs. Not insulated Very Good condition £2,500 % Shaun 07850 978188 C6673 BUNDED Fuel Tanks pair lockable steel cabinets both free standing with lifting eyes fitted internal plastic diesel tanks. Western Trailers model in green paintwork capacity approx 500 gallons with no pump but internal platform for electric pump mounting, external size 8’6” x 4’9” x 4’6” high. Fuel Safe 500 model (500 gallon capacity) in yellow paintwork with hand pump, hose & nozzle, external size 8’ x 4’6” x 5’6” wide. Price each Good condition £850 % Chris C 01926 338639 C6994 STAINLESS STEEL 17000 Litre artic tanker with towing dolly, MI Engineering part insulated round tank on York single axle chassis with air over hydraulic brakes fitted 11R22.5 twin wheels, baffled tank 30’ long & 6’ diameter with top fill access deck & rear camlock 2” outlet, currently used for water & liquid fertiliser, road going sytem with lights & fifth wheel coupling 10 stud round axle dolly fitted long tractor drawbar & 385/65R22.5 super single tyres with mudguards. Tidy unit Good condition £4,250 % Chris C 01926 338639 S7344 Mild Steel Cylindrical tank in Appx 6mm plate. 12 ft Long by 4ft diameter. Appx 4300 litres (940 gallons) 16” Round Hatch centre top, 2 x “ Inlet /outlets Top & bottom Via flange plate.Used For Tractor deisel Good condition % Shaun 07850 978188

36

TRACTORS & EQUIPMENT

C6935 MASSEY FERGUSON 390 4wd tractor, 1991 model with 5312 rec hours & Duncan Q cab, 8 speed gearbox plus reverse shuttle lever adjacent to steering wheel, telescopic pick-up hitch, 2 spool valves, 16.9R30 rear tyres 90% good tread, front 11.2R24 80% good tread. All very straight panelwork & good main paint, one of Coventry’s finest. Good condition £8,650 % Chris C 01926 338639 F3550 LEYLAND 255 Two wheel drive, three point linkage & drawbar. Aluminium cab (backless) Good tyres. Restoration project. Would suit slurry scraper. Poor condition p.o.a. % 07503 531889 C7032 BALLAST BLOCK Massey Ferguson type to fit 3 point linkage, profiled concrete type fit cat 1 & 2 hitch (last used with MF 590 loader tractor), all very straight could easily fit to tractor front linkage, measures 44” wide Good condition £100 % Chris C 01926 338639 C7090 NEW HOLLAND Ford 8340 SLE 4wd tractor, 1996 model 125hp Powerstar 7.5 litre engine with approx 7250 recorded hours(new working clock plus old hours recorded), aircon cab & air seat all fully operational, 16F/16R gearbox with 4 speed change on the move, electronic linkage controls, pick-up hitch & 4 spool valves, 4 worklights front & 4 rear, 18.4R38 BKT rear tyres 65-70% good tread, front 480/65R28 Goodyear 15% good, front fenders, blue roof model with plastic rear fenders, recent new rear axle oil seals fitted & brakes checked.

Fully working tractor in tidy straight order Very Good condition £10,950 % Chris C 01926 338639 S6746 FORDSON Dexta 2wd tractor, 3 cylinder engine starts and runs well. Roll bar and draw bar (no lower Linkage fitted). 6-16 Landrover fronts 50%, 12.4,11-36 rears 5%.

PTO. & cover. Good condition % Shaun 07850 978188 S6714 INTERNATIONAL 275 Hi Clear 2 wd tractor, 12 - 38 rears 60%. Restored in recent years back and used for light grassland work. Genuine sound tractor with excellent engine and lighting kit. Very Good condition £3,500 % Shaun 07850 978188 C7113 NEW HOLLAND

TS135A 4wd 135hp tractor, 2006 model with 6135 recorded hours, 12 speed auto powershift 40kph transmission plus reverse shuttle, power boost at pto & top 3 road gears, cab suspension with air seat in very clean aircon cab, 18 x 45kg front weights, front fenders, 4 spool valves, pick-up hitch, 600/65R38 rear tyres 30% good tread, 480/65R28 front tyres 25-30% good tread. Very clean well maintained all straight well presented reliable tractor Very Good condition £20,995 % Chris C 01926 338639 S6793 FORD 4000 Industrial 2 wd tractor c\w Heavy duty front axle, new seat, Sound mudguards, no cab 5700 hours. 50 % 480/70 R28 Rears. 50% 10.75 - 15.3 rears. Drawbar only (optional extra back end). Good condition £1,700 % Shaun 07850 978188 S7129 1995 CASE INTERNATIONAL 5130 Powershift Plus 4 wd tractor c\w Front linkage, 3 spools and pick up hitch. 520/70 R38 rears 70% good and 480/20 R24 fronts 50% LHR. Reasonable cab Average condition £7,000 % Shaun 07850 978188 S7122 FLEXICOIL Front Linkage With single ram to fit Case MXU tractor.Simple type made for Flexicoil front press see Item S7123 available with this. Very Good condition £600 % Shaun 07850 978188 F3566 FRONT LINKAGE Custom built front linkage to fit Case IH 956 lift capacity aprox 1t, comes with 4’6” packer roller. Hardly used. Good condition £500 % 07503 531889 S7256 1990 SAME Galaxy 170 4wd Tractor only done 5846 hours. Very staight & genuine with Michelin 20.8 - 38 rears 80% and matching 16.9 - 30 fronts. 12 front weights, Air con cab 24 speed mechanical gearbox.

Nice sturdy workhorse Very Good condition £8,750 % Shaun 07850 978188 C6681 STANDEN Front Linkage simple type fits to front of tractor to operate Standen Hoe, single ram lift, yellow paintwork, last used on Case tractor, could be adapted for other applications like a snow plough Good condition Offers % Chris C 01926 338639 C7079 TRUSTY Walk Behind tractor, non running model with Wisconsin single cylinder petrol engine (requires carb, magneto & fuel tank), steel wheels, rear single mouldboard plough with disc coulter & cultivator attachment frame, good paintwork, dry stored, serial number 2206 Good condition Offers % Chris C 01926 338639 F3541 NEW HOLLAND 8630 4WD 130HP (1997) 7700 recorded hours. Tyres; Rear 50%, Front 40% 4 spools, PUH, “Rangecommand” gearbox. 540/1000PTO & “E” settings.

Aircon. Good working tractor, well maintained and ready to go. Set of front weights to fit priced seperately £850 Good condition £13,500 % 07503 531889 C6990 MASSEY FERGUSON 2725 Electronic 4wd 150hp tractor with Perkins 6 cylinder turbo engine, 1985 model low hours (approx 5000) very collectable or working machine. Michelin Bib X 20.8R38 rear & 16.9R28 front tyres all 50-60% good tread, 13 x 45kg front weights on extended frame, drawbar & pick-up hitch, 2 spool valves, aircon cab (needs regas), 540 & 1000 pto shafts in toolbox, all very original with straight panelwork & cab glass etc. Stored unused for 2 years but all running, Speedshift operative, requires brake work as pedal pressure not instant at start up. Good condition £6,900 % Chris C 01926 338639 C7103 MASSEY FERGUSON 6190 4wd tractor, 130hp 1997 model with 5910 rec hours, Dyna4 transmission (4 on the move changes) Autotronic 32 speed 40 kph gearbox, aircon cab with air seat, pick-up hitch & top link, 3 spool valves, rear 600/65R38 Firestone tyres 85-90% good tread, front Taurus 480/65R28 tyres tread as rears, front fenders, recent new Dynashift cab lever fitted, front axle pivot casting & bearings etc. replaced, fully operational farm tractor done little road work in good straight order. Set front weights available at extra cost if required Good condition £13,995 % Chris C 01926 338639 C7006 MASSEY FERGUSON 203 Industrial loader tractor, 2wd manual transmission, power steering, extended loader arm kit fitted Browns 4 tine wide fork/bale spike with power tipping ram, rear concrete ballast block, Perkins 3 cyl engine (MF 35 type), 14.9-24 agric tread good rear tyres with plastic mudguards, 10.5-18 front tyres. All working but requires crankshaft drive to hyd pump repair. Average condition £1,495 % Chris C 01926 338639

NOVEMBER 2014 39

• See also the wanted section and read the buying/selling details before calling

WWW.WRIGHTSREGISTER.COM F3657 MASSEY FERGUSON

3085 Autotronic.1995 4WD Tractor. 7909 recorded hours. Dynashift 32x32 gearbox.

Cat 2 link arms, PUH, 2 Spool valves 540/1000 PTO. Tidy cab interior; airconditioned & good seat. Good condition £7,500 % 07503 531889 C6894 HEVA Front Weight carrier frame to fit front linkage, c/w bolted in cast frame bolster fitted 10 x 45kg McCormick tractor weights on 6” deep frame lip, back frame hole matrix allows alternative manufacturers weight carriers to be fitted, fully adaptable with de-mount stands, all in very good red paintwork. Also CLAAS 600kg cast front weight block to fit 3 point linkage, compact profiled design in shiny enamelled grey livery part number 081018118, front tow pin hole, suitable to have bracket fitted to double up second weight - this one priced at £825 Very Good condition £1,095 % Chris C 01926 338639 C7077 FERGUSON FE35 Grey & Gold tractor, 1957 build rare TVO model in running order requiring some new parts & other work, complete tractor with 3 point linkage, ‘T’ piece pick-up hitch & stabiliser bars, trailer tipping pipe, starting handle, Goodyear 14.9/13-24 grassland type rear tyres (diamond tread), 12 volt electrics, V5C registration document. Tractor has history of being ex MF owned. Available with link box transport box (possibly not original Ferguson) at extra cost. Good condition £1,975 % Chris C 01926 338639 C6979 JCB FASTRAC 155-65 1994 model with Perkins 150hp engine, 4wd 2ws & 50 mph road speed with twin button ratio shift on 6 speed gear lever, 6260 genuine hours, Michelin & Pirelli 540/65R30 tyres with variable tread approx 15-20% on 10 stud axles, front & rear fenders, all cab glass intact, aircon needs regas, good straight model done very little work in last few years and been very comfortable & reliable. Available at extra cost with modified Atlas Crane fitted to rear linkage, long reach model 3008 with adj stabiliser legs & piped for grab, external seat & controls, capacity 1380 kgs lift at 5.07m reach (220 bar pressure) priced at £1795 Good condition £10,995 % Chris C 01926 338639 F3624 1984 TRACK MARSHALL 155 Steel track crawler with 3 point linkage. New brake bands & gearbox bearings recently, tracks and sprockets in good order. Clean cab with air-con & radio. 5431 hours. Stainless steel exhaust. Easy starter and good runner. Factory upgrade from TM135. Good condition £7,000 % 07503 531889 S7132 FORDSON Dexta 2wd Tractor repainted with new mudguards fitted. Pick up hich & linkage. 11- 28 tyres 50%. Good starter & Runner. Good condition £1,600 % Shaun 07850 978188 S7130 CASE CVX 160 4wd Tractor with front Linkage & PTO, Fully vario 50K transmission with air & Hydraulic brakes. 600/65 R38 rears 90% Good 540/65 R26 fronts. 4 spools, Pick up hitch. Cab & front axle suspension, Air conditioning, Air seat, electric Mirrors. Good condition £27,000 % Shaun 07850 978188 S7376 1998 MF 3060 2wd Autotronic Tractor, C\w 40/50% 16.9 - 34 rear tyres, 70% 10 - 16 fronts. Good rust free cab and Bonnet.Fitted Pick up Hitch. Starts & Runs well. Good condition % Shaun 07850 978188 S7171 JOHN DEERE Front PTO Shaft driven to suit John Deere 6900 tractor .Removed ready to go Good condition TBA % Shaun 07850 978188 S7150 2007 CASE IH MXU 135 Pro 4 wd Tractor with multicontrol armrest, 50K gearbox, Air brakes & seat. Michelin 650/65 R38 70% and 540/65 R28 fronts 70% 2981 hours. 2 Spools & pick up hitch. Optional Quicke Q 950 loader. Very Good condition £28,000 % Shaun 07850 978188 S6092 2006 NEW HOLLAND TC 27 4wd Diesel Compact tractor on Good Turf Tyres, Appx 2000 hours. Comes with full road lighting. Front weights, wafer or Jerry can, 2 Spools & Folding Rollbar. Very capable worker for its size, suit scraping, mowing or just for the kids. Very Good condition £5,250 % Shaun 07850 978188 S7330 1994 MF 3120 4wd Tractor, 70% Tyres, Front Fenders, only 8500 hours, Straight & tidy Good condition £11,250 % Shaun 07850 978188 F3625 TRACK MARSHALL 90 Steel track crawler. Cab and 3 point linkage. Tracks and sprockets good and is good runner. 5391 recorded hours Average condition £5,000 % 07503 531889 C7053 MF 500 Series Tractor cab door, RH side model to fit 2 door cab in red & silver livery c/w with all glazing, dry stored. Requires bottom glass rubber surround. Upper glazing is sliding window type. Fits MF 590 & 575 models plus possibly an MF 595 tractor Good condition £250 % Chris C 01926 338639 S6995 FORD Bonnet RH side main section for 7810 Silver Jubilee Edition.Not perfect but quite usable with a little TLC. Good condition % Shaun 07850 978188 C7144 MASSEY FERGUSON 690 Tractor 2wd 77hp with 715 recorded hours on refurb engine, 1985 model 12 speed multi-power transmission, 13.6R38 rear Uniroyal tyres on cast PAVT wheels (tyres80% good), front tyres 11.5/80-15.3, pick-up hitch & drawbar, 2 pto shafts 540/1000, 3 spool valves, adjustable steering column. Fitted MF 880 quick attach power loader with standard bucket plus Grays 6 tine muck fork & twin ram operated grab, demount stands. Good straight tidy working tractor, cab interior is good with some small cab rust easily fixed Good condition £5,495 % Chris C 01926 338639

37

TRAILERS

C6888 BATESON 45HB Cattle Trailer, 10’ long with chequer plate floor & recent new ramp timber top, 1991 model with all good 6.00-16 tyres on twin axles outside body, top ramp bar, timber loading gates, inspection door, 50mm ball hitch & overun brakes, lights, some small damage to roof front corner & one rubber mudguard. NO sheep decks -cattle spec only. Average condition £850 % Chris C 01926 338639 S7135 Lincolnshire Harvest Four wheel Wagon,horse drawn. Fitted Timber extensions to take sheaves and roping hooks for load securing ropes.Very Sound with good shafts Good condition £1,500 % Shaun 07850 978188 C6862 BALE Trailer 4 wheel drawbar turntable type 22’9” long & 7’2” wide, twin wheels on front axle 6.50-16 & twin rears fitted 8.5-17.5 tyres, front & rear short steel hay ladders, low loading height, no suspension, floor ready for re boarding Average condition £495 % Chris C 01926 338639

S7114 TYE 3 Ton Single axle timber dropside trailer on 7.50 -16 tyres, 5 stud axles.

Quite solid for age Good condition % Shaun 07850 978188 S7236 MERRICK LOGGIN 8 Ton Drop Down Low loader. C\w Brakes & lights .20 Ft by 9ft Steel Chequerplate floor on 7” I section. With 2 wheel wells at back. Fitted 4 wheels with 295/80 - 22.5 tyres on 10 stud axles. Optional Super singles if prefered.

Appx 8 years old but hardly used. Very Good condition £4,250 % Shaun 07850 978188 F3577 PETIT Double axle bulk trailer.

Wooden and steel sides 8T capacity. Beautifully restored to current condition by owner.

Very Good condition £1,500 % 07503 531889 S7023 WEEKS Hi Tip 4 Ton Steel Dropside trailer on good 5 stud wheels with10 - 15.3 tyres. 10 ft 10” long body by 6ft 3” with 18” plus 18” sides. Also Standard 4 Ton Monocoque bodied steel trailer with 10ft by 80” by 43” body. Good condition % Shaun 07850 978188 S5982 2000 KING Skeleton Trailer 28FT long, tandem axle, Air suspension, Air brakes, twin 215/75 R17.5 tyres. 16 Ton Gross carry appx 13 ton. Make very good bale trailer or low loader Very Good condition £1,400 % Shaun 07850 978188 F3659 ARMSTRONG AND HOLMES

1983. 12T Double axle monocoque root crop trailer. Hydraulic fold down side door. Hydraulic rear door with grain shute. Straight chassis. Front access ladder. All working lights. Good tyres. Good condition £3,000 % 07503 531889 C7120 BALE TRAILER Artic type with towing dolly, 32’6” long body 8’ wide with ply sheet floor, high front headboard, hyd brakes, 9.00R20 twin tyres with leaf spring suspension, single tyres on dolly axle, ring hitch, painted blue all in working order Average condition £1,900 % Chris C 01926 338639 C6942 SILAGE SIDES to fit AS ACE 12 tonne mono trailer, blue painted front or side load system, self opening rear mesh tailgate, size 19’ long 7’/7’6” wide (fit tapered trailer) & 3’6” high plus 1’ extension, top lifting eyes for easy attachment Good condition £850 % Chris C 01926 338639 S6918 PETTIT 6 Ton Single axle Double dropside trailer on Good 12.5/80 -15.3 tyres.

Ply lined body (To rape proof) 13ft by 6ft 6” by 3ft 6”. Nice paintwork Brakes & Lights Very Good condition £1,800 % Shaun 07850 978188 S6154 Box Type Trailer Single Axle Lorry convertion internally 2.4m By 5m by 1.9m High. Roller door on back, sliding doors along sides. Hydraulic brakes on single sprung axle with 10 - 20 twins. Handy for seed , shoot or storage. Very Good condition £700 % Shaun 07850 978188 F3633 Low level vineyard trailer measures 5’6” wide and 12’ long flat bed. Good condition £1,000 % 07503 531889 S7260 14 Ton Alloy 20ft by 8ft by 4ft trailer , Tandem 10 stud axles with 385/65 R22.5 super singles .Originally part dropsides now welded. Std door with chute Good condition £2,700 % Shaun 07850 978188 C6998 HAYFLAKE Drop Flat transport drive over type trailer, heavy duty model with mechanical operating system, chassis base fitted 11.5/80-15 tyres, timber boarded body 20’ long & 6’3” wide, ring hitch, wheel chocks, all in working order, ideal drill/power harrow/implement carrier Good condition £1,150 % Chris C 01926 338639 S7172 2005 EASTERBY ET 4 Monocoque single axle trailer with barn type back doors.

Good Vredestein 10/75 R 15.3 tyres. Fitted Hydraulic Brakes, Handbrake & Lights. Little used & well maintained. Good condition £1,350 % Shaun 07850 978188 S7320 1993 AS 12 Ton Detachable sided trailer, tandem ADR axles fitted 385/65 R22.5 Super singles & Grain chute. Body 19ft 6” By 4ft by 7ft 6” wide.

Very Good condition £5,750 % Shaun 07850 978188 S7245 2005 TRIFFITT 12 Ton Bale trailer, 27ft by 8ft steel chequerplate floor, cw Front headboard & detacheable rear Gormer. 80% 385/65 R22.5 Tyres on 8 stud axles. Rope Box. Very tidy Very Good condition £4,500 % Shaun 07850 978188 C6983 DROP FLAT Transport Trailer tractor drawn type with 8” deep steel channel section chassis construction, thick timber floor planks, size 10’ long & 7’9” wide, rear pivoting box subframe with twin hydraulic ram activation & single axle fitted twin wheels & 7.50-16 tyres, brakes in hubs but not connected, long box section drawbar, will carry 8 tonne excavator etc. Good condition £1,400 % Chris C 01926 338639 S7321 1996 WOOTON 1 - 12 12 Ton tandem Axle trailer on 16/70 - 20 tyres all 90%. Body 18ft by 4ft 2” By 7ft 6”. Very Straight trailer on small farm. Very Good condition £6,500 % Shaun 07850 978188 C6980 HOOK LOADER Trailer Chassis Tri Axle heavy duty model to take 20’ long skips/bodies, commercial axles with air brakes (only) fitted as new 435/50R16.5 tyres, steel single flat type Leyland 45 road springs give low loading height of 47”, tractor drawn drawbar with ring hitch & shoe, hydraulic operated hook system, load capacity suitable for small excavators etc. if required.

Very Good condition £8,995 % Chris C 01926 338639 S6847 1996 RICHARD WESTERN 12 ton Tandem Axle Monocoque trailer, Sprung 8 stud axles with very good 386/65 R22.5 tyres. Standard back door with grain chute.

Blue paintwork and front ladder.Very Straight Very Good condition £7,000 % Shaun 07850 978188 S7050 IFOR WILLIAMS GD 85 General Duty Trailer, Tandem axle, 165 R13 wheels to the side, with part mesh rear ramp door. Spare wheel unused. 2700kgs MGW. Galvanised body 2.5m by 1.58m Very Good condition £1,250 % Shaun 07850 978188 S7106 PETTIT 3 Ton Timber dropside trailer.

Single or double timber sides Timber floor.

Body 10ft by 6 ft. 7.50 - 16 tyres on 5 stud axles.Choice in mixed condition. Average condition % Shaun 07850 978188 S7159 WESSEX 16Ft Vehicle trailer with 14” galvanised sides appx 6ft 6” wide. 195/80 R13 tyres. Heavy duty jack Good condition £1,600 % Shaun 07850 978188 S7161 Dump Trailer Single Axle on 16.9 24 tyres with 50% tread, hydraulic brakes.Tapered bidy holds appx 12 ton of heavy rubble. Average condition £2,250 % Shaun 07850 978188 C7082 AXLE & Wheels ex Fraser muck spreader, box section axle 67” wide bearing to bearing, 6 stud wheels fitted 16.0/70-20 Vredestein 10 ply tyres Good condition £395 % Chris C 01926 338639

C7118 HIAB Twin Axle Trailer, ring hitch type with 6m long 8’ wide timber body on steel chassis, rear axle leaf springs, front axle been added on rigid suspension, sound twin tyres, Hiab crane mounted at front with all controls & hydraulic hoses to tractor, working unit not suitable very high speed road use Average condition £875 % Chris C 01926 338639 S7259 11 Ton Steel 16ft by 7ft 6” by 5ft bodied trailer. On tandem 10 stud axles fitted with twin 11R 22.5 tyres, but would take super singles. Brakes on back axle, lights Std door with grain chute. Good condition £2,500 % Shaun 07850 978188 C7041 BALE TRAILER 25’ Long drawbar type with ring hitch & single axle fitted 385 size super single tyres, heavy duty commercial chassis & drawbar, front & rear steel hay ladders, 8’ wide ply boarded floor which is complete but soon ready for reboarding, hyd brakes. Loading height at axle 45” Average condition £975 % Chris C 01926 338639 S7160 Beaver Tail. 12ft Bed plus 5ft Hydraulic Tilt Bed Plant trailer. Chequerplate floor 6ft 6” wide. 185/70 R 13 tyres. Very well built Good condition £2,600 % Shaun 07850 978188 C7005 BALE TRAILERS Selection including single axle drawbar type with front ladders & ply floors 8’ wide, 22’6” long model fitted 11R22.5 twin wheels, 21’ model fitted 7.50-20 twin wheels, ring hitches & road lights. Twin axle 23’ long trailer fitted 7.50-16 tyres & short beaver tail end section + flat floor adaptor 6’10” wide. Also 4 wheel type with 5th wheel coupling towing dolly, 25’6” long & 7’3” wide, 13.00/55-16 front tyres & 14.5/80-18 rears, 46” loading height requires new floor Good condition poa % Chris C 01926 338639 S5942 WESTFIELD 20 Ton 30 Cubic Meter capacity hi-speed tipping trailer, Built On Refurbished Skelly trailer on Tandem Sprung axles, Refurbed Hyd brakes, 385/65R 22.5 Tyres on 10 stud rims.Monocoque tipping body, reinforced 10mm floor and tapered sides, 4mm to the top, built and painted in epoxy, underfloor multi stage ram cylinder,Tips to 52°. Slide tilt Hydraulic full tailgate door. Sprung drawbar on phosphor bronze bushed pin. New lights wiring and hoses, Road lighting. Excellent condition £15,600 % Shaun 07850 978188 F3578 Single axle monoquoce steel trailer.

Grain chute in door. Restored by owner. Very Good condition £1,200 % 07503 531889 C6982 ARTIC Bale Trailer twin axle 31’6” long including small extension, timber boarded floor on strong ex army chassis, walking beam spring suspension, air brakes, 10 stud axles fitted twin wheels & 11.00-20 all good tyres with spare, rope boxes, road lights. Carries 4 x Quadrant size big bales long x 4 high (32 in total). Coupled to towing dolly with wheels at rear of bogie chassis (makes manouevreing easier), single axle with tractor drawbar & ring hitch plus shoe Very Good condition £2,700 % Chris C 01926 338639 S7258 14 Ton Steel bodied trailer on 385/65 R22.5 Supers singles on 10 stud axles. 20ft by 8ft by 4ft body with hydraulic back door, front ladder Good condition £3,000 % Shaun 07850 978188 C6789 SPECIALIST Box type trailers Engineer made with rear loading ramps & unused.

Single axle model 2.5m long, 1.6m wide & 2m high, ball hitch & brakes, 175-13 tyres + spare, painted cream & gold, stabiliser legs, jockey wheel, mudguards, Avonride suspension, twin side doors open up as loading ramps. Suit ATV transport or Mobility equipment in fully enclosed environment. Similar twin axle model without side ramps, streamlined curved frontage, front locker box over drawbar fitted Robin EY20 petrol engined single phase electric generator built on Snipe chassis, twin spare wheels.- this model priced at £1350. Both all very strongly built, please call for more info & photos Very Good condition £995 % Chris C 01926 338639 C7119 MONO 16 tonne grain/bulk tipping trailer artic type with towing dolly, twin axle fitted 425/65R22.5 tyres & hyd brakes (all axles), steel body painted blue 20’ long, 7’6” wide & 5’ high, auto rear door with grain chute, triple tipping rams. Long drawbar dolly fitted 385 size super single tyres, ring hich & shoe, road lights & spare tyre, all straight & tidy useful trailer Good condition £3,295 % Chris C 01926 338639

38

WHEELS/ TYRES DUAL/ROWCROP

S5724 STOCKS 18.4 - 38 Duals C\w 20 % tyres & good clamps Good condition % Shaun 07850 978188 S7378 MF Rear Wheels C\w Tyres On 38” Rims. 1 - Pair Goodyear 16.9 - 38 70% tyres C\w 8 stud MF centres. 1 - Pair of 13.6 - 38 tyres 20% on rims c\w MF 8 stud centres Good condition % Shaun 07850 978188 S7095 GOODYEAR 66 - 43 - 25 Terra 2 pairs of 50% tyres on 8 stud rims with adaptor plates, 6 Ply. Also 1 pair of alliance 328 600/55 R 26.5 Fronts 80% on 10 stud 330PCD, 280 hole rims, and 1 pair of 500/60 26.5 8 stud 330 PCD 290 hole (60%) Good condition % Shaun 07850 978188 S6019 MICHELIN 9.5 - 48 Rocrop tyres, 6 ply on HDR type rims with pans, 280mm hole 8 stud 250mm hole. Also Pair of Kleber 9.5 - 48 rocrops 60% tread on HD rims with Pans 8 stud 8” 5.5” hole Ford Etc. Average condition % Shaun 07850 978188 C7084 STOCKS Black Painted dual wheels, pair fitted Goodyear 20.8R38 super traction radial A8 tyres with 85 to 90% good tread, stored undercover & including 12 clamps plus fittings, some surface cuts on tread bars only. Ideal as main tractor tyres & replace with worn set - great value Very Good condition £1,295 % Chris C 01926 338639 S6926 9.4 - 44 Rocrops C\w 8 Stus Centres plus pair of 9.5 - 32 fronts with 70% tyres.

220 Hole, 275mm PCD Good condition % Shaun 07850 978188 S7371 12.4 - 46 Rocrops To Fit MF 6480 4wd tractor, 70% tread. 8 stud centres 275mm PCD 220 Hole. Also Fronts 11.2 - 32, 10 stud centres 335mm PCD, 280mm hole Very Good condition £1,750 % Shaun 07850 978188 C6534 KLEBER Radial pair 480/65R28 tyres on wheels ex Sanderson forklift, radial tyres with good 10% tread, white painted 8 stud wheels with 8” pcd & 5.5” centre hole (large chamfered hole fit Ford tractor etc), welded centres non adjustable wheels Good condition £475 % Chris C 01926 338639 F3596 Pair of wheel rims 12x38 to fit John Deere. 8 Stud Good condition £650 % 07503 531889 C7086 JOHN DEERE 6400 tractor set wheels & tyres for 4wd model (may fit other JD models), rear 18.4R38 Firestone 7000 radial tyres 20%+ good tread on 8 stud 8” pcd yellow wheels, front 16.9R24 Kleber Super 8 radial tyres 15-20% good tread on yellow wheels with 8 stud 275mm pcd fitting. Ideal grassland set or for use on rolling etc. Good condition £1,250 % Chris C 01926 338639 C6912 GOODYEAR 48x25.00-20 Terra tyres set on wheels ex Bateman sprayer, quantity 4 all 6ply rating, 2 have wheel fitting 8 stud 275mm pocd & 220mm centre hole, other pair are 6stud 205mm pcd & 160mm centre hole. Also pair Michelin 9.5R48 row crop tyres on 6 stud Ford fitting, tread 50% good, last used on 4600 tractor Good condition poa % Chris C 01926 338639

F3636 STOCKS Pair of dual wheels 16.9R28. All clamps and eyes available.

Tyres 20% Average condition £400 % 07503 531889 S7082 TRELLEBORG Twin 423 Tyres 700/50 - 26.5 Vurtually as new, tyres only.

Very Good condition % Shaun 07850 978188 S7229 KLEBER 300/95 R52 Rocrop tyres & Rims for rear of JD 6820 and Fronts to match 270/95 R36 Very Good condition £4,250 % Shaun 07850 978188 C7067 FLOTATION Wheel & Tyre set rear pair 23.1R26 Prostor big Russian type on 8 stud 8” pcd fitting with 6” centre hole, front pair Alliance 550/60-22.5 Flotation 331 type 8 ply on 6 stud fitting 13” pcd (325mm) & 11” centre hole, all very good tyres done little work on farm from new last used on MF 698T 4wd tractor (fitted 13.6-24 & 16.9-34 or 11.2-28 & 13.6-38 tyres) Very Good condition £1,800 % Chris C 01926 338639 S7375 Mini Terra Pair of Tyres to suit front of 2 wheel drive tractor. 38 x 14-20. 5 stud.

Plus Pair of Kleber 600/65x38 tyres. 95% Very Good condition % Shaun 07850 978188 C7065 MICHELIN Tyres on white painted wheels last used for grassland work on agric tractor, radial 16 ply tubeless tyre size 24.5R21XL, sound but not deep tread, rim offset 14” & 7”, 8 stud wheel fitting & 8” pcd (21” wheel same as 533mm, 24.5” same as 620mm) Average condition £445 % Chris C 01926 338639 S7326 ALLIANCE 700/50 - 22.5 Floatation 331 Tyres c\w c\w 8 stud centres to fit front of New Holland 8340 (70% Tread) Very Good condition % Shaun 07850 978188 S7334 GOODYEAR 66 x 43 x 25 Terra tyres 70% Tread evenly across c\w 8 Stud 205 PCD 140 hole bolt in centre pans to suit New Holland. Plus 550/60 - 22.5 Fronts 12ply 60% 5 stud 330 PCD 280mm holes.

Very Good condition % Shaun 07850 978188 S5997 GOODYEAR 600/65 R28 DT 820 Tyres, treads appx 30%, Sound order Suit tractor front or sprayer Good condition % Shaun 07850 978188 S6571 MB TRAC wheels Chioice of 16.9 24 Tyres 7 MB trac rims and deatcheable centres Various amounts if tread Good condition % Shaun 07850 978188 C7108 CROSSPLY Pair 16.9-30 Semperit Farmer AC 8 ply tyres on silver painted wheels ex MF tractor, all very good tread (90% +) with minor age cracks adjacent to tread bars. Wheels are pressed steel 8 stud fitting with 8” pcd suit MF 165/168, Leyland Classic Tractors etc or tyres fit many other makes & models including trailed sprayers Good condition Offers % Chris C 01926 338639 C7044 SET Wheels & Tyres with Sam Moreton swop plate bolted centres ex Case IH 4wd tractor, rear pair Goodyear DT820 as new tyres size 650/75R32 (24.5R32) on 8 stud 275mm pcd fitting with 220mm centre hole. Pair Goodyear Super traction radial 16.9R24 as new tyres on 8 stud 275mm pcd fitting with 220mm centre hole Very Good condition £2,500 % Chris C 01926 338639 S6593 STOCKS 15 - 34 Dual wheel rims, pair of in Black. Tyres perished Good condition % Shaun 07850 978188 C5824 ALLIANCE Pair 600/60R30.5 flotation tyres 331 tread pattern traction type A8 12 ply with good tread, some small surface cuts but all sound carcass, rolling circumference when new 4340mm Good condition £450 % Chris C 01926 338639 C6586 TERRA TYRES Pair 48x25.00-20 Goodyear NHS on wheels with 8 stud 275mm pcd fitting. Also set four Continental 9.5-42 tyres (3 x 85% good tread & 1 x 20%) all on welded centre to rim wheels same fitting (suit 72” track setting), 10 ply tube type.

Last fitted on MB Trac 1000 but will fit self propelled sprayers etc. Good condition poa % Chris C 01926 338639 S6236 FOSSITT AND THORNE Heavy Duty Rocrop wheels, 1 pair of 8.3 - 44 s with 70 % Bibagrip tyres have 8 very strong 3 hole lugs 32” PCD. Also Pair of 9.5 - 48 Rocrops Also 8 stud 32” PCD. Plus Pair of Ford Pans 8” PCD big hole with 5.5” centre Good condition £250 pair % Shaun 07850 978188 C6863 TYRES & Dual Wheels Pair black painted (probably Stocks) dual wheels fitted 16.9R34 Michelin Bibagrip3 tyres, 6 ply with 25-30% good tread, rims can have centres bolted in, will require clamps for duals. Pair Goodyear radial tyres 16.9R38 suitable for duals. Pair rowcrop wheels ex front axle on Same tractor, Standen 8 stud, 6” (150mm)pcd & 110mm centre hole fitted 9.5R36 tyres all sound. Good condition poa % Chris C 01926 338639 S6647 BETTINSON 12 - 38 Duals fitted 13.6 - 38 Tyres, 2 sets one with 60% Goodyears, the other with imports . Good condition % Shaun 07850 978188 F3635 STOCKS Pair of dual wheels. Tyres are Pirelli TM300S 20.8R38. All clamps and eyes are available. 25% tread. Average condition £600 % 07503 531889 C7129 ROW CROP Pair Kleber 9.5R48 tyres on 8 stud 8” pcd wheels last used on a Ford 7740 tractor, tyres 85% good tread all sound with some minor tread area cracks Good condition £675 % Chris C 01926 338639 C7004 FIRESTONE 24.5-32 All traction field & road wide tyres fitted on pair yellow painted rims with swop centre plates, sound tyres (ex Combine type) with 15%+ good tread, 8 stud fitting with 8” pcd & 6” centre hole Good condition £395 % Chris C 01926 338639 S7379 MICHELIN XM 28 Tyres 1- Matching pair of 710/70 R38 with 50% Tread, 1 - Pair of Matching Fronts 600/65 R28 50% Tread Good condition £1,200 % Shaun 07850 978188 C5766 SET Rowcrop wheels for a JD 2850 4wd tractor with 12.4R32 fronts & 11.2R48 rears, Barum & Michelin tyres all tyres OK with between 10 & 20% tread, will fit other models Good condition £500 % Chris C 01926 338639 S6925 TERRY JOHNSON 18.4 - 38 Duals c\w 60% Pirrelli tyres & clamps. Spacers appx 10” Good condition £425 % Shaun 07850 978188 C6895 BIG RUSSIAN Pair tyres size 28.126 with all good tread on wheels with bolt in swop centres, centre plate size 8 stud 8” pcd & 6” centre hole, painted yellow last used on JD 3000 series tractor but will fit other makes, all sound done little work Good condition £875 % Chris C 01926 338639 C7085 JOHN DEERE Set Row Crop wheels & tyres, ex JD 6400 tractor all fitted with as new Taurus A8 Soilsaver 12.4R46 & 11.2R32 radials. Rear fitting 8 stud 8” pcd centre 6” hole & front 8 stud 275mm pcd 220mm hole, yellow painted wheels in bright condition with bolted centres to rims Very Good condition £1,600 % Chris C 01926 338639 C6722 SET 4 Wheels & Tyres ex self propelled sprayer with 8 stud 275mm pcd fitting, tyre size 600/65R28 tubeless - pair Goodyear with 20% tread & pair Michelin XM with approx 10% all sound, white painted rims with 300mm outer & 200mm inner offsets. Good condition £1,195 % Chris C 01926 338639 C6632 COMBINE Size set crossply tyres

suit Claas/MF etc. Size 23.1/18-26 set of four all good tread but a little aged currently on 8 stud wheels ex wheeled excavator (rubber duck) but ideal as a spare or kit your machine out with a pair of better tyres. 8 ply tyres pair Dunlop & one each Goodyear & Powermark, 8” pcd fitting with 5.5” centrehole, offsets 7” & 14” centre to rim edge Good condition Offers % Chris C 01926 338639 C7087 SUPER SINGLE Tyres Michelin 425/65R-22.5 ZXY pattern 20 ply tubeless, part worn all sound quantity 3 sold as one lot suit agric trailers Good condition £160 % Chris C 01926 338639 S7255 ALLIANCE 13.6 R 48 Rocrop Tyres and rims c\w Bolt in centres, 275 mm PCD and 220mm holes.Plus 11.2 R36 Fronts C/w rims and bolt in centres 8 stud 200mm PCD 150mm holes Very Good condition % Shaun 07850 978188 C6955 STOCKS Set dual wheels for 4wd tractor, steel rims only (no tyres fitted) with full set clamps, black painted type to take 18.4-38 & 14.9-28 tyres sizes, will need some de-rusting & paintwork Average condition £400 % Chris C 01926 338639 S5831 STANDEN 11.2 R 48 rocrops C\w 40% tyres & Bolt in Ford 8 stud centres. Also Set Of HDR Rims with 11.2 - 48m Tyres & square Ford Pans Plus f Terry Johnson dualling kit to mount 2 pairs of Rocrops on each axle. Good condition % Shaun 07850 978188 S5187 GKN 11.2 R48 Rocrops, Alliance Tyres with JD 8 Stud HD centres plus Fronts 11.2 R32 Alliance, same PCD Fit JD 6400 6620. Good condition £1,200 % Shaun 07850 978188 C7008 GOODYEAR 30.5L-32 pair Dyna Torque tyres fitted to white painted wheels with swop centre plates, 8 stud 275mm pcd fitting (wheels last fitted to Ford/NH stub axle type tractor), tyres ex Combine with some sidewall outer skin splits so suit lighter weight application, good tread depth - tyre fitter stated tyre carcase on both all sound Average condition £850 % Chris C 01926 338639 C6348 NISSAN Terrano set 4 alloy wheels & tyres plus steel spare wheel & tyre, General Grabber AT2 tyres size 235/70R16 one as new plus 4 x approx 70% good tread, all ex Commercial Terrano model 4x4 vehicle, worth the cost in tyres alone Good condition Offers % Chris C 01926 338639 S6759 D AND S 12.4 R46 Rocrops To Suit MF 6150 (Adjustable track to 62”) Fitted Alliance A 350 tyres 4 star. 95% Centres have 6” hole 8” PCD Plus fronts 11.2 R 32, Alliance tyres 3* Bolt in centres 220 hole 275 PCD Excellent condition £2,000 % Shaun 07850 978188 S6609 STOCKS 15 - 38 Steel Dual wheel rims and spacers (No tyres) Good condition % Shaun 07850 978188 F3565 STOCKS Pair of rear dual wheels 12R36. 70% Rubber. 5 Lugs. Used on IH Case 885XL. Good condition £250 % 07503 531889 S6326 TAURUS 270/95 R48 4 Star Rocrops On HD rims and centres to Fit MB trac (8 stud, 275mm PCD & 220 hole) Tyres all 85% good Set of 4 Very Good condition £1,300 % Shaun 07850 978188 S7338 GOODYEAR 66 x 43.00 x 25 Terra Tyres 20% Tread, Bolt in centres to Fit New Holland / Ford 8 Stud 205 PCD 8 Stud. 140 Hole. Average condition % Shaun 07850 978188 C6713 GOODYEAR Crossply pair tyres size 18.4-30 ex trailed sprayer on 8 stud wheels with 275mm pcd Average condition £325 % Chris C 01926 338639 S7327 GOODYEAR 66-43 - 25 Terra tyres c\w Bolt in rims & centres Fit New Holland 8340, 1- 50% 1 - 10% Average condition % Shaun 07850 978188 C7128 TERRA TYRES Pair Goodyear 66x43.00-25 NHS 6 ply with very good tread, on wheels with double centre fittings suit Ford 8210/7740 tractors with 8 stud 8” pcd fitting & New Holland combines TF & similar models, both have Mortons swop centre plates so can be adapted for any tractor/combine if required Good condition £995 % Chris C 01926 338639 C7043 STOCKS Dual Wheels pair 20.8R42 Alliance tyres on black painted wheel rims with 6 clamps per wheel, tyres in first class condition with 90% good tread kept in dark storage. Very Good condition £1,695 % Chris C 01926 338639 S5866 11.2 - R48 Rocrops with 70% Bibagrip tyres, 8 stud centres Ex Case Maxxum, plus 9.5 - 32 fronts 8 Stud adjustable centres. Both 220 hole 275 pcd Good condition £1,600 % Shaun 07850 978188 S7192 PIRELLI 7.5/7 - 36 Tyres Almost new on Frazer Agribuggy Rims & centres. Set Of 4. Very Good condition £650 % Shaun 07850 978188

39

VEGETABLE EQUIPMENT

S5247 INVICTA Vibrating table on Long legs, Screen 750mm by 2m 20mm pitch rods. 960 watt motor. Tidy unit Took out ready to go Good condition % Shaun 07850 978188 F3434 NICHOLSON Fan Bladed Onion Toppers 2 x 10t/hr Onion Toppers that can be run in parallel or individually, complete with 1.5m wide rubber belt feed elevator. All motors 3 phase. Please call for details. £5,500 % 07503 531889

40

VEHICLES/LGPV

F3666 HONDA

Fortrax 420 2011. Quadbike. 4 stroke petrol, electric start, fuel injected. 4WD & reverse gear. Comes with tow bar and handle-bar muffs. Road registered 12,098 KM. New tyres 24x900 - 11. VAT Paid Good condition £4,500 o.n.o. % 07503 531889 S7061 2006 MULTICAR Tremo Carrier S 4wd, 4ws Multipurpose vehicle with universal hydraulics inc front linkage, VW 1898cc diesel engine, Aircond cab with heated windscreen & mirrors, only 2331 hours. Can be sold with Fielder FFA 400P Front mounted flail mower, 2m Snow plough and 1500 litre tank with weed sprayer / washer unit Very Good condition £40,000 % Shaun 07850 978188 F3592 NISSAN Navara 2004. Double Cab pick up truck. 2.5L turbo diesel. 85,000 miles.

MOT until Sept 2014. British racing green.

Good condition £3,500 o.n.o. % 07503 531889

40 NOVEMBER 2014

WWW.WRIGHTSREGISTER.COM

BEDEC ACRYLIC EXTERIOR

BARN PAINT THE SAFE ALTERNATIVE TO TAR VARNISH, BITUMEN AND CREOSOTE • • • •

EASY TO APPLY EXCELLENT COLOUR RETENTION MULTI-SURFACE APPLICATION FLEXIBLE - NO CRACKING OR FLAKING • LONG LASTING FINISH AVAILABLE NATIONWIDE THROUGH TRAVIS PERKINS, RIDGEONS, BREWER & SONS, BROMBOROUGH PAINTS, ERNEST DOE & DULUX DECORATOR CENTRES

TEL 01279 876 657 FAX: 01279 876 008 www.bedec.co.uk email: sales@bedec.co.uk