Issuu on Google+

JUNE 2014

Farming

register

Britain’s Best FOr tractOrs, machinery and equipment

All systems are go for Midlands Machinery Show

Awe and envy See – Evoque pages reviewed 14-15

See page 7

Fully automatic for the people MORE power and greater comfort are promised by the new John Deere 7310R tractor – set to make its European debut this month. The 7310R comes with fully automatic e23 transmission as an option and produces 310hp at rated engine speed. It will sit at the top of a six-strong range

of new tractors, the other five producing between 210hp and 290hp. For transport and pto applications, the engine’s intelligent power management (IPM) system provides an extra 30hp and is expected to deliver 2% better fuel efficiency than previous units.

the all new

Vacuum Bracket

■ Simple & quick fixing for modern electro-hydraulic control boxes straight to the glass, no more drilling of cab interiors. ■ Easily fixed & removed in seconds ■ Available from dealers throughout the area

Dynamica Ltd

Enterprise Road Industrial Estate, Mablethorpe, Lincs. LN12 1NB Tel: 01507 477355 • 01507 473052 Fax: 01507 478832

Later this year there will be a choice of e23 or AutoPowr transmissions across the whole model range, as well as a CommandQuad transmission on the two smallest models.

AutoPowr’s ‘pedal mode’ enables the operator to change the ground speed while operating pto-driven equipment that demands constant engine rpm. Continued on page 21

Welcome to the stone age...

See pages 20-21

www.mchale.net


2

JUNE 2014

WWW.WRIGHTSREGISTER.COM

News JCB gives Fastrac new power boost button

Go on... give it a boost. Clever engine management system on the Fastrac 3230 Xtra gives you a little extra horsepower when you need it most.

UPGRADED versions of the Fastrac 3000 series tractor with new transmission features and a ‘power boost’ function have been unveiled by JCB. Power outputs of the 3200 Xtra and 3230 Xtra are unchanged at 198hp and 230hp respectively; but for heavy hauling duties, engine power management makes up to 230hp available for the 3200 Xtra and 270hp for the 3230 Xtra. Operators can choose whether or not to use the boost to the tractors’ 7.4 litre sixcylinder engine.

“Transport power management on all other tractors engages automatically,” said Edward Roach. “That raises performance but uses more fuel; with the JCB system, the operator can exploit the boost performance when towing a heavy load but save fuel by disengaging boost for the less demanding empty return journey.” As part of the Tier 4 Final upgrade package, the Fastrac 3200 Xtra and 3230 Xtra also get some useful control function enhancements – and a new look, with distinctive yellow painted wheel rims and

new ‘Xtra’ decals on both sides of the cab roof. A number of control enhancements are introduced for the JCB P-TRONIC semipowershift transmission,which is set up via the touch screen display and operated using a seat-mounted multi-function joystick. There are 24 forward speeds with six powershift steps in each of four ranges, and nine speeds in reverse; with the Xtra Drive feature, the operator can stop the tractor and move off again using just the brake pedal.


WWW.WRIGHTSREGISTER.COM

JUNE 2014

3

TYRE DISPOSAL TRADE & COMMERCIAL Collection & Environmental

Recycling of Tractor-Truck-Industrial & Car Tyres

UK LIMITED

www.envirotyre.com Collection throughout Central & Eastern England

PLEASE CALL 0845 331 2747


4

JUNE 2014

BULK BINS Available from 6 to 28 tons

Wanted and For Sale Tel: 07774 737966

WWW.WRIGHTSREGISTER.COM

News

Sexy Judi to drive bright pink combine 150 miles A FARMER is planning to drive a combine harvester all the way from Wimbledon to Dorset for charity. Judi James, 54, who was a finalist in the Farmers Weekly magazine Britain’s Sexiest Farmer contest, will set off from Wimbledon Common on June 9 and plans to reach Littlebredy in Dorset on June 11. The goal is to raise money for the Breast Cancer Campaign. She said: “I’ve always been a keen supporter of the campaign and I had this dream to drive a combine harvester from London to Dorset. I still cannot believe it is going ahead but I hope people will get behind me and we can raise some money for a good cause.” The route will take her through her home town of Guildford, Farnham and Basingstoke before she reaches Yeovil via the A303. She will drive the combine to

Dorchester on the A37 and then to the Bridehead Estate. Judi added: “Obviously I’ll be avoiding the motorways, and apologies in advance to anyone that gets stuck behind me, but it’s all in aid of a good cause.” Maurice Morton, sales and marketing director at Dickies Workwear, which named Judi its Worker of the Year in 2013, said: “It’s fantastic to see Judi going ahead with her goal to raise money for her chosen charity. Dickies is fully behind her initiative and we will do all we can to help her over the three days.” UK Worker of the Year 2014 has recently been launched as Dickies sets out to recognise and reward hard workers in the UK for the fifth year running. The prize includes the choice to take home a Suzuki S-Cross car, a Suzuki VStrom 1000 motorcycle or a Suzuki ATV

Farmer Judi James will be driving a garishly decorated combine, not pictured, from Wimbledon to Dorset for charity.

Quad, plus the chance to win £100,000 in cash. For more details visit www.ukworkeroftheyear.com To sponsor Judi visit www.justgiving.com/judijamescombinehar vesterchallenge


WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see page 19

JUNE 2014

5


6

JUNE 2014

WWW.WRIGHTSREGISTER.COM

News

Day of celebrations to mark 50 years of Basildon tractors THE 50th anniversary of the day when tractor manufacturing began in Basildon was celebrated at the New Holland factory last month. The company held a press conference on May 15 at the plant to mark its half century of continuous tractor operations. Basildon is the only remaining tractor plant in the UK and its assembly line started production on May 15, 1964. Carlo Lambro, president New Holland Agriculture, spoke about the brand’s legacy of innovation and its current

successes in the market, while Colin Larkin, Basildon plant manager, presented the history of commitment and continuous improvement that has made the plant such a success for British manufacturing. They were followed by guest speaker Christopher Hale of the UK Trade & Investment Department who spoke about the importance of manufacturing and agriculture to the British economy. Special guests at the event included Alex Golledge of the Bank of England. In addition to

the European agricultural press, representatives from the mainstream media attended the press conference. Carlo highlighted New Holland’s long history of innovation and its strong relationship with farmers around the world, which has led the brand to its strong position in the markets. He stressed the importance of the backing of CNH Industrial – a major industrial enterprise that is building its future success on innovation, with more than $1200 million a year invested in research and development, 6300 employees dedicated to innovation and 7700 patents registered.

The big five-oh takes pride of place in the lavish New Holland customer centre at Basildon.

He continued with an overview of New Holland’s worldwide performance, which in 2013 was generally positive. In every product segment the introduction of new models, such as the T8 Auto Command tractors, the CX7000 and CX8000 Elevation combines, the Roll-Belt balers and FR forage harvesters, played a key role in New Holland’s

Three men and a little plaque. Part of the 50th anniversary celebrations at New Holland was the presentation of a plaque symbolising the firm’s donation of an activity area, the Exploratorium, to a local school. Pictured from left are Carlo Lambro, headteacher Steve Horsted and Andrew Watson.

positive performance in the EMEA region. In the UK, New Holland’s tractor sales increased, with the Basildon-built T6 and T7 performing particularly well. Combines also had excellent results, with an especially big increase in sales of flagship models. Colin Larkin explained the key role that the Basildon plant’s participation in the World Class Manufacturing (WCM) programme has played in the facility’s success. Based on the best Japanese production techniques, WCM is a production system designed to attack all forms of waste and losses. It is a step-by-step process for continuous improvement that never stops: not a project, but a way of working. It is based on people, on their competence, on knowledge creation and on the constant, widespread contribution of everyone. It is successful because it is about keeping it simple and creating a transparent system. WCM practices, he said, enable the plant to manage extreme complexity successfully: the facility manufactures 14 tractor ranges, 133 models, 12,000 configurations using 9680 part numbers. In a year, no two tractors that roll off the line are exactly the same. Colin also highlighted the benchmarking element of the WCM programme, through sharing of best practices among participating factories and factfinding visits. Having entered the WCM

programme in 2008, the Basildon plant has steadily improved its performance at every audit, achieving a bronze rating in 2012. The plant has its eyes set on achieving silver within 2015. At the end of the press conference, Andrew Watson, business director for the UK and Republic of Ireland, expressed New Holland’s desire to mark the 50 year milestone with a donation to the community that has been the brand’s home for so many years. Steve Horsted of Pioneer School was invited on stage to receive a commemorative plaque as a symbol of the donation made to the headteacher of the school for the creation of a garden for the children, aged 3-19 with severe and complex learning difficulties, who attend. This will be an activity area where they will be able to discover nature and enjoy it in a safe environment, called Exploratorium – Giving Children the Experience of Nature. The press conference was part of a full programme of celebratory events that started in Basildon on March 13 when the plant welcomed more than 70 former employees who were working at the factory when it opened in 1964 and contributed to its success, as previously reported in Wrights. Further events will include a two-day celebration on July 12 and 13 for all current and former employees, their families, their guests and the whole Basildon community.


WWW.WRIGHTSREGISTER.COM

JUNE 2014

Only 79p an issue when you subscribe – see page 19

7

All systems go for very first Midlands Machinery Show WRIGHTS Farming Register is the official newspaper of the brand new Midlands Machinery Show, it has been announced. The countdown to the event has already begun with just five months to go before Newark Showground plays host to some of the most innovative

manufacturers, suppliers and service providers in the region. The event will be on Wednesday, November 12, and Thursday, November 13, from 8am to 5pm. So far more than 45 exhibitors have signed up to take part and the showground’s George Stephenson Exhibition

Hall has been filled to capacity. Showground chief executive Adrian Johnston said: “We are delighted to join forces with the team at Wrights Farming Register and Mortons Media. We are both determined to ensure that MMS is a success. “With over 50 stands already

The Wrights team are backing the Midlands Machinery Show. Pictured from left are Wrights publisher Julie Brown, Wrights editor Dan Sharp, Mortons Media Group publishing director Dan Savage, Newark Showground chief executive Adrian Johnston and Midlands Machinery Show manager Jayne Olney.

booked in and the George Stephenson now full, we have been pleased that our market research has correctly showed that there is a demand for a show which supports our local, entrepreneurial, machinery manufacturers and allied firms. “We especially welcome smaller firms or established companies that have not exhibited before. We look forward to establishing this show as a must-attend event in farmers’ and contractors’ diaries.” Wrights Farming Register editor Dan Sharp said: “The East Midlands is an area that’s rich in agricultural engineering expertise. Newark is an ideal location for an event that showcases the very best of what’s on offer and provides a central site that’s easy for visitors to reach from all over the country. I am very excited about the potential of the Midlands Machinery Show.” For more details about how to showcase your company visit: www.midlandsmachineryshow. com/exhibitors

Dense bales galore – the RBV 150 CropCutter variable chamber round baler was due to be displayed in Wales.

Hi-tech demos put new kit to the test at Welsh Grassland THE depth and strength both of New Holland’s range of equipment and its network of dealers was due to be on display to the crowds at this year’s Welsh Grassland show. On Thursday, June 5, there was expected to be a big presence from the New Holland brand at the Llanbadarn Fynydd venue in Llandrindod Wells, Powys, with hi-tech demonstrations of vehicles, implements and Precision Land Management technology. The New Holland demonstration display truck was due to be on hand for the ‘full experience’, alongside an exhibition of the latest tractor models in the T4, T5, T6 and T7 ranges. They were being put into action to show off the capabilities of some of the machinery at the event including the FR600 forager and the BB890 big square baler. Round balers were due to be represented through working demonstrations of the Roll-Belt 150 variable chamber round baler, the BR6090 fixed chamber round baler, and the Roll Belt 125 fixed chamber round baler. Also waiting for the crowds were set to be the LM5030 telehandler, the Skidsteer 220 loader and the Rustler 120.

Grand vision for county’s farming future revealed AMBITIOUS plans for the future of farming in one county have been unveiled. The Greater Lincolnshire Local Enterprise Partnership has said it believes the county can double its contribution to the economy by 2030 by investing in skills, knowledge and production capacity.

It’s set out its proposals for how this can be achieved in the Greater Lincolnshire Agri-food Sector Plan 2014-2020. The document points out that 10% of English agriculture, 5% of UK food processing jobs and 70% of the UK fish processing sector are in Greater Lincolnshire.

A common sight in Lincolnshire at harvest time – but could the county be even more productive?

The plan says the prospects for future growth are very positive, with large future increases in global demand projected; but the agri-food sector in Greater Lincolnshire faces a number of challenges and needs a clear and ambitious strategic plan if it is to sustain its market-leading position. The document sets out a three-point vision for the area: 1. Reinforce Greater Lincolnshire’s status as the national centre for high value agri-food production. 2. Increase the sector’s GVA (gross value added) by 25% per employee GVA by 2020. 3. Grow sector output by 30% through import substitution and export-led growth. Following this regimen, by 2030 it’s hoped that the Greater Lincolnshire agri-food sector will have: 1. Doubled output and GVA. 2. Increased employment by over 10% and GVA per employee by over 75%. 3. Exploited motorway links to the Midlands, London and the south-

east to replace 10% of UK manufactured food imports with Lincolnshire produce. 4. Trebled exports of food and drink from the Greater Lincolnshire area by servicing markets in northern Europe and emerging economies. Among the plan’s recommendations are the creation of an industry-led Food Board, a new sector skills plan, a 25-year water supply plan to support food production and investment in transport infrastructure. “Greater Lincolnshire is fortunate to be home to the UK’s largest and most progressive food sector, with dynamic businesses and well developed supply chains,” said Mark Tinsley, a south Lincolnshire arable farmer and sector leader for the plan at the Greater Lincolnshire LEP. “Our agri-food sector is truly a national leader in this rapidly growing sector, but we must not rest on our laurels. The coming decades will bring many challenges and it’s important that Greater Lincolnshire is ready to face them.

Arable farmer Mark Tinsley believes Lincolnshire must rise to the rather ambitious challenge of doubling its contribution to the economy within 16 years.

“Our plan for the agri-food sector in Greater Lincolnshire is ambitious, but we are confident that it is achievable.” The Greater Lincolnshire LEP will soon be sending the plan to agri-food and related businesses in the area and welcomes feedback. A new brochure promoting the area’s food industry and related businesses such as logistics and packaging will also be published soon.


8

JUNE 2014

WWW.WRIGHTSREGISTER.COM

News

Rakes and mowers make very clean sweep at show KUHN Farm Machinery was demonstrating a new four-rotor rake at this year’s Grassland & Muck event as it launched a number of new grass harvesting machines. The GA 13131 Gyrorake adds to Kuhn’s existing range of rakes and was shown alongside its semi-mounted GA 8713 and GA 9513 machines. With a working width of 11-12.5m, the GA 13131 is designed for use on farms where a high work output is required. The new Gyrorake features four rotors, each of which holds 11 tine arms, with four tines per arm. Each rotor is mounted on four pivoting, large diameter wheels for excellent ground contouring and high load bearing. The wheels sit close to the tines for better ground following, while Kuhn’s three dimensional rotor suspension system is intended to provide stability when working at high speeds. Rotor working height can be adjusted hydraulically, with all four rotors powered by a headstock-mounted hydraulic drive unit which gives the option to increase front rotor speed by up to 20% when working in lighter crops. The four rotors work together to create a central ‘windrow’ that’s 150-240cm in width. They are controlled via a cab-mounted VT50 series terminal which is ISOBUS compatible and which allows operating sequences to be preprogrammed. Each rotor can be lifted individually to give the machine higher ground clearance across uneven terrain. The GA 13131 utilises Kuhn’s Masterdrive GIII gearbox to reduce power transfer. The Masterdrive’s patented two-stage design uses bevel and spur gear reduction and is completely enclosed. Service intervals are every 200 hours. The new rake requires a minimum pto power output of 95hp. It is less than 4m in height and folds to 3m in width. Kuhn has also introduced a new triple-gang mower conditioner to its line-up of grass machinery. The FC 9530 utilises one frontmounted and two rear-mounted units to provide a working width of 9.1 to 9.5m. Each unit is mounted via a pendulum-type hydraulic articulation which enables vertical and angular adjustment of the mowing head to follow ground contours. All three mowing units are also fitted with the Optidisc cutterbar, Fast-Fit cutting knives and Protectadrive safety bearings, and are controlled via a cab-mounted panel which enables each mowing unit to be lifted individually or simultaneously. Each conditioning unit features a rotor equipped with pivoting fingers which can be

Kuhn’s GA 13131 four-rotor rake made an impressive sight at the Grassland & Muck show.

adjusted to suit different types and densities of forage. Rotor speed and conditioning intensity are also variable, with a rotor speed of 1000rpm typically used for grass, while a rotor speed of 750rpm is better suited to more delicate crops. The slower speed can also be used to create an airy windrow or to ensure that the windrow from the front mower is positioned within the confines of the tractor’s wheel tracks. “The FC 9530 has been developed to work with high power tractors and as such is capable of working at high forward speeds for maximum productivity,” said Kuhn UK sales manager Duncan McLeish. “All three mowing units feature a robust drive train and Kuhn’s proprietary Optidisc cutter bar which are designed to withstand the stresses of high intensity workloads. “The mowing units also benefit from Kuhn’s hydraulic Lift-Control suspension units which ensure a high quality of mowing and a wide range of vertical and angular movement for excellent ground contouring.” The Lift-Control system reduces ground pressure to minimise crop damage and reduce wear and tear of the cutter bar by allowing the rear mowing units to move vertically by up to 50cm. The front mowing unit, which is more susceptible to damage caused by uneven ground, can be moved by up to 70cm vertically. Each unit can also be angled by up to 30º from horizontal. Cutting overlap can also be adjusted from 30 to 50cm to ensure a clean mowing action on sloping ground or in fields where the machine has to negotiate obstacles and tight corners. The FC 9530 folds to a transport width of 2.95m and can be stored either vertically or in a flat position. It is fitted with running and signal lights as standard.


WWW.WRIGHTSREGISTER.COM

K ITBUILD IN GS

Steelw o rk,ea vesb ea m s,p urlin sa n d b o lts 6 0’x 30’from £2,495 plu sVAT ex w orks 084 5 4 5 9 4 079 •w w w.kitb u ild in g s.co .u k

Only 79p an issue when you subscribe – see page 19

JUNE 2014

9


10 JUNE 2014

WWW.WRIGHTSREGISTER.COM

News

Let’s roll out the barrel (washer) with Tong Peal VEGETABLE industry handling equipment designer and manufacturer Tong Peal has announced an updated model of its barrel washer. The company says its proven barrel washer design has been enhanced to incorporate the latest technology, offering users even greater washing results, while ensuring “the gentlest of handling”. The updated system includes a number of new features ranging from Tong Peal’s Blue Inverter motors to heavy-duty side guards offering easier access for maintenance. Manufactured in barrel lengths ranging from 1.2-5m, the Tong Peal Barrel Washer can be specified as a standalone unit or integrated into a new or existing handling line. The washer is available in 12 standard specifications or can be fully customised to suit exact washing requirements, with throughput capabilities of up to 40tph. “With over 80 years’ experience in manufacturing effective and gentle vegetable washing equipment, our barrel washer has been installed into hundreds of farms and packhouses across the country,” said Simon Lee, Tong Peal sales manager. “The new updates provide users with an even more effective process, helping to minimise time and labour costs, but still guaranteed by a proven and reliable design.” One organisation using the Tong Peal Barrel Washer as part of a complete washline set-up is progressive potato grower Slaney Farms Ltd. Based in Co Wexford, Republic of Ireland, the family-

Trio of top staff join the Micron team THREE key new staff have joined precision spraying equipment specialist Micron. Chartered accountant Gillian Wall started in March 2014 in a new role of group finance controller. She will assume responsibility for the HR and IT functions at Micron’s HQ in Bromyard, Herefordshire. Based in Berri at Micron’s Australian subsidiary company Enviromist Industries Pty, Jaspreet Kaur also joined the group in March 2014. She’s the new accounts and admin manager. Simon Rehill is now the European sales manager for the Micron Sprayers division. He has over 20 years of industry experience in his previous sales, service and engineering roles in the agricultural field both in the UK and abroad.

‘Confident’ lot of pig producers flock to firm BUILDINGS and equipment company Quality Equipment has reported a record number of enquiries from pig producers at the British Pig and Poultry Fair, Stoneleigh Park, Warwickshire. “The UK-wide enquiries stretched across both days of the event last month and we are still receiving more as a result of visits to our stand,” said firm director Graham Baker. The interest has been in both buildings and equipment and he believes this is a result of new investment not just refurbishment. “There seems to be a new level of confidence within the industry and producers appear to be modernising and reequipping to become more efficient, and are expanding in some cases,” he added. For more information visit www.quality-equipment.co.uk

Finance deal on kit has got that Kuhn-do spirit Keep it clean – the Tong Peal barrel washer.

run business farms and processes over 400 acres of traditional Irish potatoes every year. “Since expanding our acreage and introducing new varieties in 1994, we have seen demand for our crop increase dramatically,” commented John Stafford from Slaney Farms. “In fact, we now supply some of the country’s largest supermarkets, as well as independent packers across the UK and ROI. “For the last 10 years, we have washed and processed our entire crop using a small static Tong Peal line, which provided throughputs of four tonnes per hour. “Although the equipment was effective and reliable, we needed a larger system to cope with increased crop volume and reduce lead times on our yearly throughput. “With this in mind, we contacted our local Tong Peal dealer for Ireland, Kevin Woods Machinery, to help us develop a custom washing and handling line. By working closely with

Kevin and the design team at Tong Peal, we specified a solution to meet our exact processing requirements. “The bespoke line consists of two 150° box tippers leading to a barrel washer with integrated destoner, followed by a sponge drier, roller inspection table, lift roll grader and four exit hopper/conveyors. “The system delivers hourly throughputs of up to 14 tonnes, helping us to turn around a higher volume of crop quickly after harvesting. “The line is outstanding, especially the Tong Peal Barrel Washer, which provides excellent washing results and gentle crop handling. The integrated destoner also reduces labour and processing time, protecting the rest of the line from unnecessary damage. “Since installation, we have seen immediate results. Processing times have reduced significantly, and throughput potential has increased threefold. Crops are handled effectively but treated with care

and attention. The layout fits our washhouse space perfectly, while meeting our exact needs. “From initial design to build and fabrication, Tong Peal’s hands-on approach gave us complete confidence. Furthermore, with a local dealer on hand, we knew that the support for our service and maintenance requirements was just down the road. “Rather than buying a standard machine from an overseas manufacturer, the whole process was personalised to Slaney Farms. We were invited for a tour around Tong Peal’s Lincolnshire factory, as well as being involved in every step of the build process, which meant that our team of growers could input into the layout and design process. “I’d definitely recommend Tong Peal, as the equipment is not only reliable and efficient, but also helps us to minimise costs and maximise profits. Having an Irish dealer has been invaluable for us, and the local back-up service is fantastic.”

Making the grade at Highland show TONG Peal will be showing off its latest Caretaker and Storemaker grading machines at the Royal Highland Show. The event takes place on June 19-22 at the Royal Centre, near Edinburgh. Visitors to the show will have the opportunity to speak with the Tong Peal team about recent industry developments,

including the company’s latest models. The Caretaker and Storemaker are designed to provide growers and packers with the ability to grade and process multiple crop types in all weather conditions. According to the company blurb, the Tong Peal kit “features the latest technologies

Taking the high road – Tong Peal’s Storemaker has been on display north of the border.

and a range of next-generation user benefits”. “As well as heavy-duty design and Tong Peal’s market-leading cleaning unit the EasyClean, Tong Peal’s systems are built with its proprietary energyefficient Blue Inverter Technology and Auto-Touch HMI Touch-Screen control for complete control of crop handling,” the company says. “Reducing energy consumption by up to 50% when compared to previous models, Blue Inverter Technology substitutes traditional motors with electric direct drive on all inverter variable speed motors, ensuring exact energy delivery and power on demand.” Also on show in Scotland will be the company’s Revolver Box Tipper. This is fully adjustable and customisable to meet user requirements and can apparently achieve throughput figures of up to 40 tonnes per hour. For more details www.tongpeal.co.uk

KUHN Farm Machinery has announced details of its latest 0% finance deal which offers farmers and contractors the opportunity to invest in a 4m tine and disc cultivator. The new finance offer applies to a range of cultivation machinery including the Performer 4000, Kuhn’s one-pass tine and disc cultivator which features double rows of discs, four rows of tines, a row of levelling discs and a roller for stubble cultivation. The finance scheme is available until the end of August 2014, with customers able to select from one of two offers: a 1 + 4 annual payments option or a 5 + 55

monthly payments option. In both cases, the offer provides 0% finance on 50% of the Performer 4000’s £66,094 retail price. This scheme is also available on Kuhn’s Cultimer, Optimer, Discolander and Discover machines. A range of 0% finance offers are available on a selection of Kuhn sprayers, hedgecutters, balers, ploughs, mixer wagons and fertiliser spreaders. Kuhn Finance is a partnership between Kuhn Farm Machinery and De Lage Landen, a fully owned subsidiary of Rabobank Group. For more details on Kuhn Finance visit the finance section at www.kuhn.co.uk

Taking centre stage for Kuhn’s new finance deal is the Performer onepass tine and disc cultivator.

Heavily-muscled pigs sent to help out Maltese industry A CONSIGNMENT of Yorkshire pigs has been sent to boost the small but efficient Maltese pig industry. A total of 57 great-grandparent (GGPs) and grandparent (GPs) boars and gilts were despatched from ACMC’s Yorkshire nucleus units. The consignment included the hyper-prolific Meidam and Volante female lines as well as the heavily muscled and ultra-lean Vantage Extreme boar line. “Malta revitalised its pig industry in 2011 by improving health and nutrition, setting up a new nucleus unit and switching genetics. This had a significant impact on productivity; and the latest import from Britain will enable the KIM Co-op, which represents the island’s pig producers, to breed its own replacements to ensure the stock remain genetically up-to-date,” said ACMC managing director Matthew Curtis. “All feed in Malta has to be imported, so sow productivity and efficient feed conversion from modern genetics is vitally important to help the island’s pig industry to remain competitive.”

These burly chaps are beefing up the Maltese pig industry’s stock.


WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see page 19

Trailer is the main event in YFC tractor contest COMPETITORS in a tractor handling contest at the Eskdale District YFC rally had the tricky task of manoeuvring a long trailer through a tight course marked out with fencing stakes. Then the second driver in each two-person team had the misfortune to have to reverse the tractor and trailer through the course.

Easy does it now... Whitby YFC member Kate Hodgson manoeuvres the McCormick X7 Pro Drive with long trailer backwards through a tight course of wooden stakes.

The event was one of many Young Farmers Club competitions held at the rally organised by Stokesley YFC in North Yorkshire. The goal was to test the skill, competitive spirit and even artistic talent of young people living and working in the countryside. Whitby YFC members Kate Hodgson and Rob Forster won the tractor handling event, which emphasises skill and safety rather than speed. But however well they fared, all those taking part had the distinction of being among the first in Yorkshire to get behind the wheel of a new McCormick X7 Pro Drive tractor. It was loaned by farm machinery dealer Rob Stevenson of Stokesley-based Agriplus.

Too close for comfort. Rob Forster deftly guides the bulky McCormick X7 through the YFC challenge course.

“Many operators like previous McCormick tractors because of their relative simplicity and ease of control,” he said. “But the new control layout provides many more functions and features without being over-complex or daunting for operators new to this type of system.” The 165/175hp McCormick X7.660 Pro Drive supplied by Agriplus is available for onfarm demonstrations. The new range comes in four- and sixcylinder versions with power outputs starting at 131hp (rated speed) and rising to 212hp.

There’s a stake there Rob. Rob, there’s a stake. Rob! Stake! YFC member Rob Forster threads the needle with someone else’s valuable McCormick X7.

JUNE 2014 11


12 JUNE 2014

WWW.WRIGHTSREGISTER.COM

FENCING CONTRACTOR • POST & RAIL • STOCK, NET AND BARBED WIRE • RABBIT FENCING

Stewardship Scheme work undertaken Tel. Julian Nugus 01469 - 531137 Mobile: 07850 - 857988

FA8! -#'8A77 G6; E487*8#*7D GAK;7=A9#K'D 1:8*768I AK; 1*K=#K' 5:K68A=6:87 B%$6G<=GJH 6&9H!<6H&!J <94 JF%%=G$!J H& ,5B/ ?5B <94 0&F9H!(JG4$ BH$@<!4JIG% J6I$;$J *F== -=<9HG9K <94 2<G9H$9<96$ B$!DG6$J "&! ?$4K$!&@J <94 7&&4=<94J B%$6G<=GJHJ G9 HI$ G9JH<==<HG&9 &" BH&6A/ .$$!/ ,#FG9$ <94 -&JH ) E<G= *$96G9K

Landscape and Forestry Burrows joins the Kubota family KUBOTA has added Staffordbased Burrows Grass Machinery to its list of official dealers. Burrows is the largest distributor of grass machinery to local authorities, golf clubs and contractors in the north Midlands. Established in 1951, the company will now offer its customers Kubota’s range of high performance tractors up to 100hp, groundcare solutions and utility vehicles. Burrows managing director Clive Watton said: “Becoming a Kubota dealer is part of a major drive to grow our business. “The groundcare market has changed dramatically in recent years and in order to take advantage, Kubota was the ideal machinery partner for us. “Probably the most significant shift in the market has been the growth of the hire

market, which can be attributed to the impact that local authority budget cuts have had on grounds maintenance programmes. “There’s less capital expenditure available for machinery purchases, but still grass and hedges to be cut, so councils want hire arrangements or will use contractors to carry out this work instead. “In order to capitalise on this, it was essential we could work in partnership with a machinery manufacturer that could supply a complete range of reliable and high performance solutions, all backed up by a first class service offering. “Kubota is the most

The future’s bright – the future’s orange. Clive Watton of Burrows Grass Machinery with a Kubota M9960. Burrows has become an official Kubota dealer.

recognised brand in the groundcare sector and has developed a fantastic reputation for producing the most costeffective, efficient, versatile and hard working machines on the market.

“It’s a name that our customers trust to help them get the job done time and again and we are delighted to join its dealer network as we enter this exciting time for Burrows Grass Machinery.”

Quad-X rushes to defeat persistent infestations

1*K=#K' 5<!K$ JH&6AJ &" <== JG'$J &" !&F94 %&JHJ/ J#F<!$ J<@9 %&JH ) !<G= <94 K<H$ %&JHJ+ 3== JG'$J &"

&D$!9GKIH 4$=GD$!( J$!DG6$+ 0&9H!<6H K!&@G9K &" I&;$ %G6A$4 J$$4J+ 5&6<= %!&D$9<96$ J$$4 6&==$6HG&9J G9 <== <!$<J+

H*;'*MAI#K' 5G96&=9JIG!$ K!&@9 ?<'$= JH<A$J <94 :G94$!J <94 J#F<!$ J<@9 JH<A$J+ 0<!!(G9K &FH 0&F9H!(JG4$ BH$@<!4JIG%/ ,5B/ ?5B &! ,7CB @&!A FJG9K (&F! &@9 =<:&F!8 >I$9 =$H FJ #F&H$ &9 HI$ JF%%=( &" HI$ ;<H$!G<=J+

5:K6A=6N FA8! -#'8A77D G:46%D G#K=:MK7%#8*D GE>> @/J .*MN @>(@$C&@)<@> :8 @>(@$C+>@@+& 1A0N @>(@$C&>@(@> F:?#M*N @$"$>C>"@+)( 222BLA8!3#'8A77B=:B4!

The aptly named Wipeout weed wiper gives rushes a taste of the good stuff.

MANUFACTURER Quad-X & Blaney Agri has rushes in its sights. It teamed up with Farming Connect last month to hold a rush management workshop and is offering advice to farmers on how best to tackle an infestation. A spokesman for the firm said: “The problem of rush infestation is not new, and with recent years of wet weather the problem is only getting worse. “Rushes can quickly infest a field if not managed and use up the foods, space, light and moisture which should nourish profitable crops. They make harvesting difficult and reduce the grazing value of land. “For rush control it is simple: Sort them out now before they take over.” Under the Single Payment Scheme, farmers are required to maintain land in good agricultural and environmental condition as part of cross-

Doing as its name suggests: the Quad-X Power Shredder gives rushes the bum’s, er, rush.

compliance. Failure to comply with this condition may result in a reduction in the Single Farm Payment. “Where weeds are abundant they indicate that land is not being properly farmed and are evidence of a low level of grassland management,” said the company spokesman. “The best and quickest way to control rush is to cut the rush as early as possible in the year. One advantage of cutting at this time of year is that the sap has dropped and the rush becomes more brittle and easier to cut, using less fuel. “And surprisingly the advantage of cutting rushes is that they provide effective fertiliser as they contain 70% NPK value of farmyard manure. So the cut rushes can help put humus back into the land and help boost grass growth. “However, with last winter’s heavy rainfall many landowners are only able to take action now, making this workshop very timely indeed.” Based in County Antrim, Quad-X offers over 100 attachments for quads including the ATV Power Shredder for cutting and shredding rushes and the ATV Wipeout weed wiper. These machines are design to provide access where getting a tractor in is difficult due to wet ground or difficult terrain. Where access and ground conditions allow, the Blaney Agri range of rush control equipment is highly effective, which includes the Power Shredder mowers and the tractor mounted Wipeout weed wiper. For more details visit www.quad-x.com or www.blaneyagri.com

Flatpack compact tractor now available pre-built BUYERS previously put off by the thought of having to get their hands dirty – not to mention having to sort out all the tricky bits – can now grab a ready made Siromer 204E right off the shelf. The 204E, Siromer’s most popular model, is fitted with a high torque, three-cylinder, 20hp injection diesel engine and features 4WD, double acting spool valve for hydraulic control and a universal CAT I three point linkage. It also has power steering, a folding roll bar and a sprung seat. It costs £5550 plus VAT. Those looking for a teensy bit more power can find it in the form of the Siromer 354E (35hp) and 504CH (50hp), priced at £7250 and £10,500 respectively, both excluding VAT. These tractors feature a larger chassis and four cylinders. For more details visit www.siromer.net

Impress your friends with your mechanical knowhow – without having to lift a finger. The Siromer 204E flatpack tractor is now available pre-built.


WWW.WRIGHTSREGISTER.COM

JUNE 2014 13

Only 79p an issue when you subscribe – see page 19

Thousands get stuck in at Grassland & Muck NEW machinery is always a highlight of the Grassland & Muck event, and visitors were treated to a great selection this year. Whether it was Pottinger’s mammoth 11.2m wide mounted mower, or Joskin’s giant Cargo trailer unit, the equipment was a big draw. Visitors to the silage clamp area were wowed by three Pistenbully piste-bashers, while others queued up to see new balers, foragers and muck spreaders in action. “Visitors and exhibitors were delighted with this year’s event, and we’ve already had enquiries about booking stands for 2017,” said event organiser Alice Bell. Despite the mixture of sunshine and showers, almost 13,500 visitors made the most of the 190 acre site to see farm machinery in action, and to speak to more than 240 exhibitors about the latest research and advice. The themes of this year’s event were valuing grass, best practice techniques, and, ultimately, maximising returns from the crop. Visitors queued up to hear how to get more from grass, with speakers like Dr Liz Genever from EBLEX teaming up with farmers to combine cutting edge research with practical experience. “When grass growth and quality is good, it costs 8p/kg of dry matter to produce,” said Dr Genever. “That compares to bought-in feed at 32p/kg DM.” Increasing annual yields by 20% could therefore save £170/ha in

replacement silage costs or £544/ha in replacement concentrates. Ed Green, who rears beef cattle on contract at Banks Farm, Shepton Mallet, Somerset, has significantly boosted grass yields over the past couple of years. “We were running 600 cattle on 400 acres, but now we’ve got the cattle on a bed-and-breakfast basis I’ve tried to increase numbers as much as possible,” he said. He now has 900 head of cattle, growing from 200kg to 460kg at an average liveweight gain of 1kg/day. “We’re looking to increase to 1000 head soon.” In contrast was Alex Robertson, farm manager at Coopon Carse Farm, Newton Stewart, Scotland, who cuts fresh grass daily over the summer to feed to his 500 dairy cows. “We have 1800mm of rain on heavy clay, so grazing isn’t really an option,” he said. “Instead we’re feeding up to 33kg of fresh grass a day on top of a total mixed ration – and it’s cut our feed costs by almost £62,000 a year.” The principles behind maximising grass growth and quality were the same, regardless of the system, said Cathal Bohane, senior Keenan nutritionist. Measuring grass growth, grazing or cutting it to the correct level and rotating pasture were all key. “As grass intakes increase, feed costs decrease; and although grass is a variable product, good grass and cow management can boost

The scene at Grassland & Muck 2014. And a good time was had by all.

profit margins significantly,” he said. To maximise cow health, it was vital to know what the cows were eating and to monitor rumen fill and body condition, added Mr Bohane. “We measure grass availability and match it to demand, adjusting supplementary feed accordingly. Our precision feeding group of farmers average 4363 litres of milk from forage, with a margin over purchased feed of £2012/cow; considerably more than traditional grass-based systems of 3130 litres and £1589/cow, respectively. There is huge potential if you manage and feed your grass well.” But choosing the right grasses is also essential. And visitors to the event had plenty of new varieties – many demonstrated in sown plots – to choose from. “The new Recommended Grass and Clover List attracted a lot of interest,” said Piers Badnell at DairyCo. “It’s now interactive so you can tell the programme what you want and it provides you with suitable varieties, which makes it a lot more userfriendly.” One development was the new range of Festulolium grasses – crossbreeds of different types of fescue and ryegrass that lasted at least a year longer than conventional leys, said Tim Kerridge, agricultural director at DFL Trifolium. “They are deeper

rooting and are more tolerant to sub-optimal conditions like drought and water stress, producing 25-40% higher yields under these conditions than conventional grasses.” However, farmers had to get better at matching grass varieties to their soil type, climate and farming system, said GrassMaster’s Charlie Morgan. “It’s like buying different feed concentrates – you have to look at what your grasses can do for you.” Considerations included longevity, yield, seasonality and fertiliser use efficiency. “You also need to look at protein quality and the digestibility of the grass – one point in D Value (digestibility) is worth 0.3 litres of milk a day,” he added. “All of these are major factors in improving the profitability of your business, but you have to tell your seed merchant what you want.” Getting the soil in optimum condition has been a challenge following two wet summers and the wettest winter on record, so it was no surprise that the new compaction alleviation demonstrations proved a massive draw.

Claws for celebration – Ritchie’s Super Multi Bale Grab was one of the top attractions at Grassland & Muck. It can load three square or round bales on to a trailer in one movement using its folding wings and their 14 high tensile steel tines.

“It’s been extremely busy – a lot of people have come along particularly to look at the machines and find out how to relieve compaction,” said Dr Paul Newell-Price, senior soil scientist at ADAS. A survey in 2010 found that up to three-quarters of grass fields were moderately or badly compacted – and that could now be higher, he added. “The thing to do is go and dig some holes and see if you have compaction – only then can you decide how and when to alleviate it.”

New machinery is always popular at the Grassland & Muck Event, and this year was no exception, with more than £20 million of equipment demonstrating and on display, including an innovative robotic mower. From fieldwork to feeder wagons, visitors inspected machinery at every stage of the forage process, with the muck spreading demonstrations also drawing huge crowds. The next Grassland & Muck event takes place in 2017.

Marauding nettles run riot after the mild winter WEEDS are getting out of hand in many grass fields thanks to the dismal weather conditions, according to chemicals company Dow AgroSciences. Docks, nettles and thistles have become particularly prolific since March due to the mild winter and early spring. “A shortened spray window last year, due to the late start to the season left many grass fields untreated,” said Dow grassland agronomist David Roberts. “And the wet winter has also encouraged weed seeds to germinate in poached areas where soil was exposed. “Conditions over the past two seasons have allowed large populations of problem weeds to establish and colonise large areas, to the point where they are now getting out of hand. I have seen many fields this spring with infestations of 30% weeds or more.” He said that on fields that had not been treated before first cut, spraying with a translocated herbicide three to four weeks before the second cut would catch the weeds at the ideal stage. They will be actively growing, with fresh, clean leaves and all the same size across the field. “Select products that match the target weeds such as DoxstarPro for docks, and follow the label instructions carefully regarding dose rates and water volumes to ensure the best control,” he said. “Many livestock farmers are now looking to

Get to the sprayers, it’s a full scale weed invasion! Dow says spray docks for long-term control – don’t top them.

produce more from their grass. Getting rid of weeds is one area that can make a big difference to pasture productivity. “Research carried out by the Scottish Agricultural College proved that where weeds grow, grass does not. So a 30% infestation of docks or thistles could be hitting grass yields by almost a third. “Some farmers try and top their way out of the problem – but this is a waste of time, labour and grass, as the weeds simply regenerate by pushing up new vegetative growth. A well-timed spray with an effective grass-safe herbicide offers a quicker and longer-term solution, and is cheaper than reseeding the whole field.”


14 JUNE 2014

WWW.WRIGHTSREGISTER.COM

4x4 review

By MARk SToNE

The clothes make the mud-plugger FIRST announced in March 2009, the oh-so-stylish ‘Baby Range Rover’ had customers flocking to the showrooms well in advance of even the prototype making an appearance. Anticipation had reached almost fever pitch by the time the Evoque was officially launched in July 2011 and delivered to the first customers in the following September. Within months the Freelander 2 based model became the motor that virtually saved the Land Rover brand. Aspirational, affordable and smart-looking, the new Evoque instantly provided ownership of the iconic Range Rover name to a whole new group of customers. It was the size of a hatchback, car-like to drive and more importantly nowhere near as offensive and in your face as the mega money, fuel burning Range Rover Sport or full sized Vogue. All of a sudden you could own a Range Rover that had some serious green credentials and didn’t affront your friends and neighbours. What it did and continues to do is give you the big Range Rover experience in a compact package, a genuine cross-over SUV that, if Land Rover’s marketing is to be believed, is a serious piece of urban ‘street cred’ kit able to take on the worst the hardened metropolis can throw at you. Strange thing is, I personally have never needed the capabilities of a 4x4 in a city centre but maybe I don’t head to the right or wrong part of town. But while Land Rover’s PR machine aims its talents at a particular market segment, for those looking for a luxury SUV that can and will perform offroad, the Evoque is still a serious proposition. And you

Apart from minor external differences, the 2014 Evoque upgrades are beneath the skin.

don’t even need to wear your shirt hanging out or have a smartphone glued to your ear to own one, Land Rover is even prepared to sell an Evoque to us ordinary folks as well.

Confusing onlookers

Remarkably close to the original concept design even down to the rear windscreen that still provides what to my mind is restricted rearward visibility, the Evoque echoes its larger siblings while embodying the lines of a true sporting hatch. To be had as a five door or even more rakish three door coupe, the visually tapering impression can, should the owner so wish, be emphasized

even further by specifying pearlescent paintwork such as the five door Prestige on test. Depending on the light and angle of view, the Evoque was either dark grey, dark brown or a very deep green; an extra effect if you so wish, but one that has no actual bearing on the Evoque other than to slightly confuse onlookers. But whichever body style of Evoque appeals the most; front to rear they are remarkably the same. A narrow egg crate grille that now carries the new look Land Rover badge is flanked by razor edge light pods and the high cut rounded front arches make up the front wings. A high waistline climbs rapidly over

the deep, wide opening doors, in this case four of them, before culminating high over the rear wheels; the roof line and panoramic glass panels falling rapidly to join them. The full sized electric tailgate dominates the rear view. Sat on 20in multi-spoke alloy rims complete with low profile 245/45R20 Continental Cross Contact rubber, the high-cut low-ride combination comes together to produce a purposeful looking profile, one that has carved its own distinct niche within this now closely fought market. The faux fore and aft skid plates will protect against minor abrasions but will do little if

C L A S S IC LA N D RO V E R S B R ITISH C L A SSIC S H E R ITA G E M O TO R S P A R TS 1948 to D a te R E TA IL TR A D E E X P O R T SP E C IA L P R O JE C TS R E STO R A TIO N S M A N U FA C TU R IN G

C o untry W o rksho ps,R isega te, N r. S pa lding,L incs P E 11 4E Z

Tel/Fa x: 01775 750223

w w w .british4x4centre.co .uk

The latest lighting technology plus cutting edge design lets the Evoque stand out from the rest.

The 190bhp engine provides the Evoque with more than ample power.

anything to deflect serious engine bay or rear underbelly intrusion. However, one aspect of the Evoque that really stands out is its aerodynamics. It has one of the lowest drag coefficients of its type and one interesting feature is the small rear arch extensions. Noticeably reducing the spray deflected on to fellow motorists, they also try their best to keep fouling away from the small rear screen although their efforts are somewhat negated by the fact the short rear spoiler drags rain and other dirt in from above.

Leather-clad surfaces

Inside the two-tone trim cabin, the fully sized Range Rover ambience awaits. Nearly every surface is clad in quality, finely stitched leather or soft touch panels. The big seats fold themselves around you while for the driver the sensation of being at the helm inspires. From the rake and reach leather bound multi-function steering wheel to the fingertip locations of all the switchgear, the controls are exactly where they should be while the panoramic glass roof allows in just the correct amount of light. The new InControl system allows the occupants to trigger

Those 20in rims and wide 245 tyres are definitely road-orientated.

a silent emergency SoS call and there’s another button for Land Rover Assist. Are there any negatives? Why yes. Land Rover’s constant references to the celebrity induced influences have, to my mind, a negative effect and could well be the reason why certain aspects are overly fussy. The simple task of turning on the heated seats, which usually involves just one action, now requires the driver to hit the switch then refer to the central screen for the setting then back to the switch to revert the screen back to your original view. Similarly the familiar fore and aft shift gear selector has been replaced by a rotating knob that raises and lowers when the car is started. While it might look stylish and inkeeping with the floating central console, it’s a design feature that seems to exist for the sake of it, a feature contrived to impress.

Perchance you forget, the kick plate illuminates the Range Rover name during the hours of darkness.

Attention to detail such as this spray reducing fin sets the The Land Rover badge guarantees off-road Evoque design apart capabilities while the Evoque name has assured from the others. the brand’s future.


WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see page 19

FAST FACTS Model: Range Rover Evoque Prestige SD4 Price: £43,000 Engine: 2179cc, four-cylinder, 16v, 190bhp turbodiesel Transmission: Nine-speed automatic Top speed: 121mph CO2 emissions: 159g/km Combined mpg: 32.4 (as tested)

Although luggage capacity isn’t bad, the Evoque’s main cargo is passengers.

Cutting edge aside, with the rear seats in position the Evoque provides 575 litres of cargo capacity increasing to 1445 litres with the seats down. If needs be, a further 75kg can be carried on the roof along with 1800kg maximum braked towing; proof positive that this small Range Rover is capable of working for a living, unlike certain numbers of the people who tend to drive them. Beneath the bonnet sits the transversely mounted in-line four-cylinder, 16 valve turbo diesel. It’s rated at 2179cc and a 240bhp version is available; the 190bhp provides an exceptionally useful 177lb-ft of torque, the engine’s true flexibility now being able to be capitalised upon courtesy of the new nine-speed ZF automatic transmission. Seamless from stationary all the way through the 0-60mph time of 7.1 seconds and a top speed of 121mph; if the new gearbox displays any hesitation it’s the transition between forwards and reverse, the decision time somewhat arduous. For those who feel the urge, Sport can be selected which allows the drive train to hold each gear into higher revs; or by flicking either of the paddles to the rear of the steering wheel, sequential changes allow the driver to exploit the Evoque’s performance even more. It is however worth noting that on back roads, flicking through nine gears can at times become wearisome. The best use of the paddles is to keep the transmission running between second and fifth, any higher or lower and the full auto is far more accomplished than you’re ever likely to be. On the road the solidity of the Evoque is instantly apparent, as is the handling which gives that car-like sensation. It is undemanding to drive, once again substantiating the reason why many non-4x4 drivers have taken to the Evoque with such enthusiasm. The new Torque Vectoring by Braking and Active Driveline add significantly to the Evoque’s balance and driver confidence. The system works in two distinct ways, the first allowing the overenthusiastic yet

inexperienced driver to brake while cornering, the Evoque instantly tightening its line. The second method of exploiting the system allows the more capable driver to dab the brakes, turn in early and accelerate in advance of the usual exit point, the Evoque’s overall dynamics responding by increasing point-to-point performance. When combined with the well weighted power steering and steady feedback, the Evoque’s poise through fast, tightening corners is a pleasure, as is the car’s ability and willingness to react to steering and throttle input, the overall attitude and poise of the chassis always even and balanced even when pushed hard. In off-road performance, something that’s perhaps irrelevant to most of its drivers, the Evoque’s 500mm wading depth is complemented by 215mm and 240mm front and rear axle clearances and 25 and 33º approach and departure angles. Disengaging once the vehicle exceeds 22mph, the automatic 4x4 system is more than capable of undertaking most demands asked of it, although, like the Freelander 2, hill decent and more specific pre-programmed 4x4 commands such as mud, snow, gravel and ruts can be quickly brought into play.

You will be raced

Economy wise, over a total of 336 miles, the Evoque returned an average consumption of 32.4mpg which equates to approximately 400 miles per 60 litre tank of fuel. Somewhat short of factory figures, steady throttle running on extended motorway runs did allow the motor to climb just over 40mpg. One unusual point of note is that the Evoque does tend to suffer from unwarranted belligerence on the part of other road users, especially those driving cars manufactured in Bavaria. So while you’re out and about in your new, shiny Evoque don’t be surprised to find you’ll be raced on dual carriageways, cut up and purposely made to wait at junctions, all of which are a rather sad measure of inadequacy from those who can’t see past a perceived image.

Certain controls are overdesigned mainly for the sake of it.

The high grade interior cossets and cocoons the passengers but the celebrity connection is wearing thin.

Depending on your needs and pocket there are three grades of Evoque to choose from. Ignoring the eD4 2WD version for no other reason than why would you want a 4x4 that isn’t, the entry level is the Pure followed by the Prestige, as tested, followed by the Dynamic. Each one offers higher levels of trim, engine upgrades and performance. Prices start at £29,200 rising to £46,650 although these will rise significantly once you start adding extras. But whichever Evoque suits, once you’ve got over the lifestyle aspect of the motor and start to look beneath you quickly realise that if it’s a known name prestige luxury compact SUV you need that will actually off-road for you then the Evoque will probably fit the bill. Likewise, given it’s a Range Rover, the residuals will remain strong, a ready market always keen to acquire the brand as they cascade down into the used car market. If the Evoque has a problem from what might be called the ‘real user’s’ perspective, it’s the image the vehicle has created. As I’ve commented, the levels of aggression shown by certain other road users tend to reflect on the typical Evoque driver, one that regards off-roading as entering a car park. However, once you get past the stereotypical view and the at times over-designed controls, you’ll find the Evoque is actually quite a serious player when it comes to ability, medium sized practicality and a

rewarding driving experience. Five adults or two up with luggage, as a daily driver the Evoque is more than competent. As a motorway cruiser it’s extremely refined, as a continental tourer for two it’s extremely capable and as an offroader it’ll genuinely surprise, every aspect of the motor aimed at driver and occupant satisfaction. The problem is, as an almost peerless all-rounder, unless you simply must have the Range Rover name, the Freelander 2, though a less accomplished tourer, is just as good if not better when it comes to outright practicality.

JUNE 2014 15


16 JUNE 2014

WWW.WRIGHTSREGISTER.COM

Energy and technology

Put a lid on it with United’s tough new roofing range FARMERS and building contractors can now get their hands on tough new guttering and purlins following the launch of hard-wearing ranges by United Roofing Products. The family-run business has added galvanised steel guttering and purlin systems to its comprehensive roofing and cladding collection, all manufactured on site in Cullompton, Devon. Tailored to customers’ specifications, the metal products are, the firm says, manufactured to the highest specification to maximise service life. “We can now make galvanised steel guttering in lengths of up to 10m, which means fewer joints and opportunities for leakage,” said John Dominy, director of URP. “The guttering is also pre-punched so it’s easy and quick to install. And with different thickness options up to 3mm, it has a service life of 20-30 years.” The steel purlins are also made to customer

specification, supplied cut-to-length and fully pierced. “We have a range of Zed, Cee and Eaves beams available, with sections capable of up to 12m clear span,” said John. “Because we manufacture the products ourselves, we can offer expert advice and a personal, quick service for our customers.” After a 10-year break from the Devon County Show, United Roofing Products; which also makes the Highlight perforated wall sheeting and AntiCon metal roofing; has once again exhibited at the event. “Having visited as smallholders in recent years, we felt that it was returning more to its agricultural roots,” said John. “That gives us a better opportunity to showcase our products to the right market – and to meet up with old friends and clients over some local food and drink.” For more information visit www.unitedroofingproducts.com or call 01884 839302.

Deadly nerve agent kills flies within minutes SPECIALIST agricultural hygiene company Hysolv has produced a new fly bait for the poultry, pig and dairy industries that kills flies within minutes of contact. SoFast is based on imidacloprid, which works on the nervous systems of insects, it is

quick and easy to apply on interior surfaces by spray or paintbrush. Trials have apparently shown 98% of all flies within a building are killed within 24 hours. A special attractant lures flies to the bait, while a bitter substance helps prevent it being

If you’re a fly you probably don’t want to hear about what this stuff will do to you. At least, as its name suggests, SoFast will make it quick.

consumed by children, pets and other animals. “The active ingredient has been well-proven and highly successful around the world to control a variety of agricultural and horticultural pests,” said Richard Brealey, Hysolv managing director. “Following the withdrawal of some products, it now makes a useful addition to the poultry, pig and dairy farmers’ armouries against flies in buildings.” In wide-span houses, where there is an absence of suitable surfaces in the centre, the solution can be painted on to industrial fly rolls to hang from ceilings. It is suitable for use in occupied livestock buildings. Imidacloprid trials conducted in closed German pig housing show an 86% reduction in fly numbers, even eight weeks after application. SoFast costs £54.40 per 1kg tub of concentrate. When the granules are diluted a 1kg tub is sufficient to treat 500 sq m. For more details visit www.hysolvuk.co.uk

Rotating thermometer that fits right into your pocket THERMOPOP has launched a thermometer with a 360° rotating display that can apparently be read from any angle and in either hand. Pushing a button rotates the display in 90° increments, enabling the user to read the temperature in any position i.e. left hand, right hand, vertical or horizontal. It also features a backlit LCD display for low light levels. The thermometer is housed in a waterproof IP66 case and measures temperature over the range of –50 to 300°C with a 1°C/°F resolution. The thermometer will power off automatically after 10 minutes to prolong battery life. Each thermometer is supplied with a permanently attached, pointed stainless steel penetration probe with a fast response tip, together with a probe cover with integral pocket clip. The ThermoPop thermometer costs £17 plus VAT. For more details visit www.etiltd.com

Turn it whichever way you like and the readout remains the same – that’s the patented 360° rotating display of the ThermoPop thermometer.

And finally, monsieur, a wafer thin section of roofing. United Roofing Products’ products are lightweight and durable.

Check soil on the spot with new meter COMBINING a thermometer with a pH meter, the new 8100 Plus kit from Electronic Temperature Instruments is designed to enable quick spot checks on soil out in the field. It includes both a pH electrode and a temperature probe and can be stuck directly into soil – although the manufacturer doesn’t recommend this for stony ground where the device could be damaged. A spokesman for ETI said: “The 8100 Plus pH meter incorporates a clear custom LCD that shows the pH value from –2 to 16 pH with 0.01 resolution and displays the temperature over the range –39.9 to 149.9°C. “With a menu-driven custom microprocessor, the user is helped with clear prompts during operation and calibration. The unit comes with everything needed to test the pH of soil, including a rugged carrying case to make your pH kit fully transportable. “The 8100 Plus pH meter housing has an integrated rubber seal to ensure complete water resistance and helps to reduce the possibility of damage in harsh environments. At the touch of a button, the instrument will automatically recalibrate itself when used in conjunction with pH buffer solutions.” The 8100 Plus pH meter kit costs £120 plus VAT. For more details visit www.etiltd.com

Is it a thermometer? Is it a pH meter? Is it a thermopHemeter? The Electronic Temperature Instruments 8100 Plus kit combines two very useful functions in one handy package.

Switch on for system that lets dealers peek into your tractor JOHN Deere’s Remote Display Access (RDA) system has now been fully activated in Western and Central European countries, as part of the company’s FarmSight strategy. The RDA allows your JD dealer to remotely view the GreenStar 3 2630 and CommandCentre in the cab of your tractor combine or

forage harvester and advise you directly on how to optimise your machine’s settings. “The full-scale availability of RDA is a significant step forward on the journey to expand our range of John Deere FarmSight solutions,” said Christoph Wigger, vicepresident sales and marketing for John Deere’s Europe,

If you have a problem, if no one else can help, and if you’ve got it installed, maybe you can use John Deere’s RDS system.

North Africa and CIS region. “Wireless connectivity between the operator in the field and the dealer results in significant time and input savings and leads to increased machine uptime.” RDA is an integral part of the JDLink telematics fleet management system, which uses the machine’s integrated CAN-bus to view key performance data. For example, reports and customer recommendations generated by JDLink are available to analyse machine use, working hours and average engine load. This enables the dealer to suggest that the customer should keep an eye on idle machine time, consider increased use of guidance systems and eventually adopt a more fuel efficient driving habit. The dealer can also carry out targeted operator training, even with third parties involved. Likewise, off-site experts can remotely view the driver’s screen for real-time troubleshooting and operator advice in the field.


WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see page 19

JUNE 2014 17

Miscanthus specialist hits back after ‘invasive species’ report BRITISH miscanthus firm Terravesta has refuted claims about the energy crop that were originally published in the American Invasive Plant Science and Management journal and subsequently reported on in Wrights. The company strongly rejects the notion that miscanthus could become an invasive species. Terravesta managing director George Robinson said: “Concerns about seed spreading from the UK’s commercially grown miscanthus are completely unfounded. “All of the miscanthus grown to date in the UK for biomass is a sterile hybrid (Miscanthus x giganteus) – so any seeds produced are completely incapable of germination. “The original article raises the topic of potential invasiveness among any future

seed-bearing miscanthus hybrids, but fails to highlight the role that ongoing breeding and approval programmes will have in mitigating this. “In the UK, research clearly shows that the risk of creating an invasive seed-bearing weed is extremely low, and intensive trials and breeding programmes will ensure that invasion will not be an issue in future seedbased miscanthus crops.” He said that trials referenced in the published article took place in Georgia and Virginia, US, which had considerably different climatic conditions to our own. “In fact, for the non-sterile miscanthus hybrids selected as being potentially suitable for UK use, scientific breeding programmes consistently reaffirm that our weather conditions do not support flowering, pollination or seed set,” he said.

Terravesta managing director George Robinson has moved to quash American claims that energy crop miscanthus could become an invasive species.

“Miscanthus continues to offer UK farmers a viable lowrisk, high-return arable solution – and it would be a shame to let out-of-context research have a detrimental impact on its very bright future here.”

Its value as an energy crop is undisputed – miscanthus being grown in the UK.

Sands Agricultural Machinery is among the first sprayer manufacturers to adopt the Pentair Hypro Duo React system – it has been specified on about 60% of new Vision sprayers ordered this year.

Novel nozzles let you swap from regular to low drift on the move A SPRAYING system designed to give operators greater control over spray quality and application rate will be demonstrated at Cereals this month. The Duo React nozzle body from Pentair Hypro has positions for two active nozzles. Air valves enable the operator to switch between them from the tractor or sprayer cab. With a suitable spray controller, both nozzles can be used at the same time to achieve particular spray characteristics or high fertiliser application volumes. “The operator can instantly switch from one type of nozzle to another in reaction to changing conditions, to meet drift control obligations, or when moving from one crop to another,” said Pentair Hypro product manager Roger James. “It’s an affordable, cost-effective solution that gives operators easier, more convenient and safer control over in-field nozzle selection.” The Duo React compact nozzle body has a fixed single outlet and a four-way turret. A key attraction

of the system for crop protection treatments is that operators can change from conventional to low drift nozzles simply by flicking of a switch or tapping a spray controller’s touch screen. “Field trials and general experience have shown that using the most appropriate nozzle for different crop structures, targets and prevailing conditions can have a significant impact on the efficacy of crop protection treatments,” said Roger James. “We believe the easy switching provided by Duo React will encourage operators to improve application precision and effectiveness.” Pentair Hypro will have a live demonstration of single and two nozzle spraying using a Müller Elektronik controller on its stand alongside the sprays and sprayers arena at Cereals on June 1112. The show takes place at Chrishall Grange, near Duxford, Cambridgeshire. Among those using the new system are Sands Agricultural Machinery, John Deere and Knight Farm Machinery.


18 JUNE 2014

WWW.WRIGHTSREGISTER.COM

Auctions and Events Cast your eye over the Case IH stable DOZENS of companies will be exhibiting their wares at the Cereals Show – this year being held in Cambridgeshire. Among them will be Case IH. The company is planning to display everything from Farmlift telescopic loaders to the all-conquering QuadTrac 620 at the event on June 11-12 at Chrishall Grange, near Duxford. New to the Case IH range, Farmlift telescopic loaders combine compact dimensions, powerful engines and hydraulics with multifunctional capabilities. The six models range from

the Farmlift 525, designed for use in low buildings and livestock housing, to the Farmlift 935, which handles high and heavy lifting work with ease. Power outputs span 74hp (Farmlift 525) to 143hp (Farmlift 635 and 742), with maximum lift heights from 5.7m to 9.6m. A maximum power output of 692hp makes the Quadtrac 620 the world’s most powerful tractor in series production. Last year, it was named Machine of the Year 2014 in the XXL category at Agritechnica. Case IH, which has a lot of

experience with Continuously Variable Transmission (CVT) technology, will also be showing its new six-cylinder Magnum CVX models and four-cylinder Maxxum CVX for the first time at Cereals, alongside the Puma CVX. Last, but not least, the Maxxum CVX EP is the first four-cylinder Case IH tractor to incorporate CVT. The Maxxum 110 CVX EP, Maxxum 120 CVX EP and Maxxum 130 CVX EP are rated at 110hp, 121hp and 131hp, but feature ‘Power Management’ which provides up to 32hp more in transport, hydraulic and pto

Be seeing you soon! The mighty QuadTrac 620 must surely be the star of the show at Cereals, on the Case IH stand at least.

McCormick dishes up tractor trio at Cereals THREE new tractor ranges will be in the spotlight at this year’s Cereals event. McCormick distributor AgriArgo UK is launching the all-new X4 series, a small-size tractor with 90-107hp; the X6 Power Plus series, with power outputs from 111-131hp; and the all-new X7 Pro Drive, with four- and six-cylinder engines. The latter delivers rated power outputs from 131hp, climbing to a max output of 212hp with power management. “We have a big story to tell with our new tractors and the Cereals event is the place to do that for the arable sector,” said Ray Spinks, general manager and sales director at AgriArgo UK. “With the new McCormick X4 Synchro and Power Shuttle, X6 Power Plus and X7 Pro Drive tractors joining the X50 range, we’re well underway with the introduction of up to eight new product lines over the next two to three years.” The X4 series is being billed

as ‘a light-weight tractor with a big heart’. McCormick product specialist Paul Wade said: “It’s an all-new design with a remarkable choice of eight individual transmission configurations to suit every application. “Together with standard or high-flow hydraulics, different pto configurations and a new cab, providing spacious and stylish accommodation for the operator, the X4 represents an attractive, modern package.” Three models will be available initially, and all feature Deutz engines for the first time in a McCormick. The compact four-cylinder diesel is tuned for rated speed outputs of 85hp, 95hp and 102hp, growing to peak at 90hp, 99hp and 107hp for greater economy as engine revs are pulled down under load. In the transmission department, there is a choice of easy-shifting synchro shuttle or fingertip-shifting power shuttle

Well, hello there: The all-new McCormick boasts rakish good looks and a substantially comfier cab.

and 12x12 or 24x24 with Hi-Lo gear arrangements. An overdrive option gives 40kph at reduced revs to save fuel. A creep gearbox provides 16x16 and 32x32 speeds, with extra-low ratios for specialist field tasks, and there are standard and ‘eco’ versions of the two-speed pto, plus optional ground speed drive. The new mid-range X6 Power Plus tractors will succeed the MC four-cylinder models, and also the current X60 line, with a flexible specification package to suit different needs and preferences. There will be two models at first – the X6.420, with 111hp for draft work and 121hp for pto/transport operations; and the X6.430, with 121hp climbing to 131hp with auto engine boost. “These new models combine the best features of the tractors they replace in a new package with more features and options than before,” said Paul. “They will appeal to farmers wanting a relatively simple tractor, as well as those who want added sophistication and the performance benefits that come with it.” There are new transmissions, including 40kph Eco and 50kph for the first time, and power take-off options with ‘economy’ and ‘power’ settings. The X7 Pro Drive tractors will also make their Cereals debut. The range represents a shift in design, specification and technology for the marque, which is particularly evident

in the new Premiere cab, which features modern electronic controls. “Many operators like previous McCormick tractors because of their relative simplicity and ease of control,” says Ray Spinks. “The X7 designers have achieved similar levels of simplicity while delivering modern electronic control and many more functions into the cab.” The Premiere cab is a new design; the four-pillar structure is 180mm wider between the front pillars and the doors shut with a gentle push, thanks to high-spec latches and adjustable hinges. Step aside MC, there’s a new guy in town and his name’s X6. Shoring up McCormick’s mid-range is this nifty little mover.

Billed touchingly, if a touch twee, as the little tractor with the big heart, the X4 is new to McCormick’s range.

“The fit and finish, and the interior materials used, are to automotive standards, with a seat-mounted console bringing all routinely used controls close to the driver,” adds Paul. “The designers really have pulled out all the stops to make this a comfortable and practical place to work.” The range comprises a trio of four- and six-cylinder models, with power outputs starting with 131hp at rated speed; 143hp max from the X7.440 Pro

Drive, climbing to 188hp draft max; and 212hp pto max from the X7.680 Pro Drive. All have a 24x24-speed transmission as standard – 40x40 with creep – with Autoshifting and other automated control features available. Cab suspension and the popular McCormick independent front axle suspension are also available, together with 50kph and air trailer braking for safe and secure road transport.

Machinery makes a big comeback at spectacular show in the West Country FARM machinery made a considerable comeback at this year’s Bath and West Show, with around £2million worth of equipment on display. Five major West Country and national agricultural dealerships showcased their wares on more than 3200sq m of stand space. Brand new machinery on display included a variety of tractors, ATVs, and farm equipment – show organisers hope that the revival will continue over the coming years. Old Mill Accountants and Financial Advisers, which sponsors the show, was instrumental in developing the package, alongside show organiser Alan Lyons, who spent many hours speaking to dealers to find out what would encourage them to attend. “In years gone by, farm machinery was an important part of any country show,” said Alan. “Sadly, as the price of machines increased and the way farmers made purchasing decisions changed, the number of machinery exhibitors declined. Now, we’ve reversed that and once again made machinery an important part of the Royal Bath & West Show.”

Sam Read, partner at Read Agriservices, returned to the show after a two-year break, and brought McCormick tractors and other machinery. “We exhibited for 17 years before that; machinery trade just gradually declined,” he said. “It’s rare to make large sales on the day at any show, but it will be good for raising brand awareness and offering hospitality to our customers.” Four companies that were first-time exhibitors at the event were Redlynch Agricultural Engineering, Compass Tractors, Keenan and SJH Machinery. Between them, they brought Fendt, Massey Ferguson and Kubota tractors, as well as cultivators and drills, forage and feeding equipment, harrows, slitters and trailers. Mike Butler, board member at Old Mill, remembers visiting the show with his father and meeting dealers to discuss the next farm purchase. “It was the natural way to do business 30 years ago, and many farmers miss having that opportunity to view the different machines on offer,” he said.


JUNE 2014 19

WWW.WRIGHTSREGISTER.COM

Auction dates for your diary

Retirement sparks machinery auction bonanza See anything that tickles your fancy? Challenger? Massey Ferguson 8690 perhaps? The line-up at the JH Walter sale.

MORE than 230 lots of farm machinery, including tractors and combine harvesters, went under the auctioneer’s hammer at a farm dispersal sale at Winkburn, near Newark. A large crowd of farmers and dealers attended the auction held on site at Roewood Farm in May by Lincoln auctioneers JH Walter following the retirement of H Broadberry and Son. Mike Johnson, agricultural business consultant and auction manager for JH Walter, said: “This dispersal sale included clean, modern and well-maintained farm machinery from the main vendor and lots from 18 other vendors. “Over half-a-million pounds was achieved in total during the event, which attracted buyers from across the UK, including Scotland and Devon, and others from abroad. “This was the second trip of the year west of the River Trent for our machinery auction team and we are delighted with the results achieved for our clients.” The star lot of the sale was a Case

IH Axial-Flow 9230 combine harvester on tracks with a 35ft header, which had only 145 drum hours and sold for a reasonable £170,000. A Class Lexion 480 with 2822 drum hours sold for £37,500. Among the tractors from the farm, an immaculate Cat Challenger MT765c with 3319 hours and full auto steer, sold for £81,000 to a local machinery dealer competing against a German machinery dealer bidding over the phone. A Massey Ferguson Dyna VT 2008, with 4952 hours, sold for £38,000. An exceptional Knight 30m self-propelled sprayer sold for another £81,000. Meanwhile, a 2012 Mzuri Pro Til 4m drill sold well for £30,000, a Sumo Quattro 3.5m sold on the telephone for £20,000 and a Simba X Press with ST Bar made £8400. A Dowdswell DP120 5 furrow plough made £3000, Rolland V2170 muck spreader sold for £8000, a 950lt fast tow diesel bowser with two cylinder compressor made £2950 and a McConnel PA9058 hedge cutter fetched £4800. The most unusual item in the sale

The JH Walter crew get busy on the Axial-Flow 9230. It was a snip at £170,000.

was a separately lotted liquid fertiliser mixing plant – the fertiliser mixing tank sold for £4100, while three 100,000-litre water tanks made £5400, £5100 and £5300, respectively. All the items were bought by a buyer from Scotland. For more information about onsite machinery auctions, and for a free auction appraisal, contact the team at JH Walter (01522) 504323 or email auctions@jhwalter.co.uk

June 14 Farm machinery & livestock equipment. Grove Farm, Robertsbridge. South East Marts (01323 844874 email info@southeastmarts.co.uk) 20 collective machinery and equipment sale. Hobbs Parker Auctioneers LLP (01233 506246) 21 collective sale agricultural & garden machinery, builders’ & contractors’ plant. Osney Lodge Farm, South Godstone. South East Marts (01323 844874 email info@southeastmarts.co.uk) 21 vintage sale. Kivells, Bradworthy area (01409 253275) July 2 machinery sale. York Auction Centre, Murton Lane, Murton, York (01904 489731) 5 nottinghamshire collective sale. Perkins George Mawer & Co (01673 843011) 12 collective sale. Hazle Meadows, Ross Road, Ledbury. HJ Pugh & Co (01531 631122) 19 cambridge vintage sale. Cheffins (01223 213777 or vintage@cheffins.co.uk) 19 Weeting steam rally – agricultural memorabilia. Barry L Hawkins (01366 387180) 19 vintage tractors, stationary engines, implements, tractor spares, garden equipment, tools & collectables. Much Marcle Steam Rally, Herefordshire. HJ Pugh & Co (01531 631122) 25 Annual collective auction of vintage & classic tractors, stationary engines, implements, tractor spares, garden equipment, tools, agricultural bygones, models and literature. Welland Steam & Country Fair near Malvern, Worcestershire. HJ Pugh & Co (01531 631122)

August 6 machinery sale, with vintage and bygone sale. York Auction Centre, Murton Lane, Murton, York (01904 489731) 8 collective machinery & equipment sale. Hobbs Parker Auctioneers LLP (01233 506246) 16 collective and machinery sale. Hexham Auction Mart (01434 605444) 16 Harrogate vintage sale. Cheffins (01223 213777 or vintage@cheffins.co.uk) 25 Honiton Hill rally Auction. Kivells (01409 253275) september 3 machinery sale. York Auction Centre, Murton Lane, Murton, York (01904 489731) 27 collective machinery and equipment sale at Chilli Farm, Coldred, Kent. Hobbs Parker Auctioneers LLP (01233 506246) OctOber 8 machinery sale. York Auction Centre, Murton Lane, Murton, York (01904 489731) 18 cambridge vintage sale. Cheffins (01223 213777 or vintage@cheffins.co.uk) 25 the lincolnshire collective sale. Perkins George Mawer & Co (01673 843011) nOvember 7 collective machinery and equipment sale. Hobbs Parker Auctioneers LLP (01233 506246) 12 machinery sale. York Auction Centre, Murton Lane, Murton, York (01904 489731) 15 collective and machinery sale. Hexham Auction Mart (01434 605444) 29 bristol vintage sale. Cheffins (01223 213777 or vintage@cheffins.co.uk)


20 JUNE 2014

WWW.WRIGHTSREGISTER.COM

Plant and machinery

Telehandler fanatic finishes epic 2500-mile Merlo trek DIE-HARD Merlo fan Leo ‘Merlo Manne’ Terqujeff has completed a mammoth 2500-mile trek behind the wheel of a P25.6 telehandler. Last month, Wrights Farming Register reported on the beginning of Leo’s slightly bonkers attempt to smash the Guinness World Record for the longest journey aboard a telehandler. The idea was to cover 2500 miles across half of Europe from Italy to Finland, passing through Slovenia, Hungary, Slovakia, the Czech Republic, Germany, Denmark and Sweden.

Leo left Cuneo in Piedmont, northern Italy, on April 28 and reached his goal on June 3. After entering Slovenia on May 3, Leo was welcomed by representatives of Tehstar, the country’s official Merlo importer. He crossed the border with Hungary on May 5, on the 6th he visited MCI where he met some old friends whom he met at Merlo service technician training courses in Italy and made some new ones. To welcome him was the owner of MCI,

One of Leo’s colleagues tries out the roomy, ahem, cab that Leo’s called home for the last couple of months.

Laszlo Varga, his colleague Karoly Szorgalmas, director Peter Gieber and his friends from technical service Jozsef Szilgyi and Mihali Kohonicz. Continuing his journey, Leo entered Slovakia on May 7 and visited Ematech, Merlo importer in the country where he gave his first interview for a local TV station. On May 8 he crossed another border to enter the Czech Republic and on the 9th arrived at the importer Cime where he was triumphantly received by Jana Michaela, Bohumir, Miroslav M, Miroslav N, Tomas and Petr. After a day off spent in Prague, Leo set off again on May 11 towards the border with Germany which he crossed on May 14. After visiting the sales subsidiary Merlo Deutschland in Germany, Leo reached Denmark. Leo’s route is being officially recorded using MerloMobility, a control system created by Movimatica and customised according to the requirements of the Guinness World Records commission.

He drove 2500 miles in a Merlo and all he got was this cake. Actually, it was probably worth it.

Not exactly the most direct route, but it did take in a lot of Merlo dealerships.

The end in sight but not quite yet. Merlo Manne takes a selfie during one of the journey’s hotter, tougher, darker moments.

Brand new and completely clean at the outset – this is Leo’s Merlo P.25.6 after 2500 miles. Grimey!

This is a technology developed within the Merlo Group that allows the information gathered to be customised according to customer needs and every operational, geolocation or diagnostic parameter to be monitored. Leo’s P25.6 telehandler, with its 1.80m width and 1.92m height, is the most compact in the Merlo range but at the same time offers the largest cab in the category. It can travel on roads at 22.4mph. Leo said: “The trip is now done! It’s been an incredibly memorable month of my life. Big thanks to all who were involved, both, companies and private persons. Without you this event would not have been possible. Thank you. “Hard to believe but the whole trip went without any problems. The Merlo took all the stress just fine, even though the way was steep with mountains to cross. It also got very hot some days. “Next week is a big press conference in Pirkkala. There are journalists from several countries, as well as factory people. Most likely, the Guinness certificate will be handed to me out there.” A spokesman for Merlo said: “Leo Terqujeff is one of the people who best expresses the Merlo spirit and has turned his passion into a job. Responsible for after-sales service in Rotator, Merlo importer in Finland for nearly 20 years, Leo is an expert and esteemed technician who fell in love with his job and Merlo telehandlers. “On his left shoulder, in fact, Leo has a tattoo of the Merlo logo, symbol of a working relationship that has become a passion.” Details of Leo’s adventure can be found on Facebook at www.facebook.com/merlomanne

Leo Terqujeff steps clear of his ride at the offices of Rotator Vantaa, where he works, in Finland.


WWW.WRIGHTSREGISTER.COM

Tracked gravel cart crawls into action as firm tackles the wet weather fallout A LAND drainage firm in Norfolk has invested £250,000 in two new machines to help cope with the volume of projects under way following the months of bad weather earlier this year. William Morfoot, based in Shipdham, has added a Mastenbroek CT12 tracked gravel cart and Kirpy BPB 250 trackway recycling machine to its fleet. They will be used primarily with the firm’s agricultural clients. The state-of-the-art CT12, which can carry up to 15 tonnes of gravel in a single load, will be used on land drainage projects. The cart will ‘follow’ the trenching machines, rather than travel beside them; minimising crop damage particularly when undertaking drainage operations ‘in crop’. The low ground pressure it exerts means it can be used on soils which are unfit for wheeled equipment. The BPB 250 has been

JUNE 2014 21

Only 79p an issue when you subscribe – see page 19

The Mastenbroek CT12 tracked gravel cart can carry 15 tonnes of gravel in a single load. Handy if you’re digging a trench.

acquired to help support the firm’s trackways projects, enabling farm roads and tracks to be ripped up, pulverised and recycled then relayed leaving a consistent and even surface for vehicular traffic. An adjustable, three-way hydraulic blade enables roadways to be shaped creating a camber at surface level so water can run off the

surface as necessary, minimising pothole creation. Benefits of using the trackway recycling process include utilising existing hardcore already contained within the roadway, reducing the need to import large quantities of hardcore. William Morfoot managing director Tim Sisson said:

“Investing a quarter of a million pounds in state-of-the-art equipment is a fundamental part of producing our highquality craftsmanship and with these new machines within our fleet we’re able to manage an even wider range of integrated operations in-house.” For more information visit www.williammorfoot.co.uk

Slurry gas warning from the NFU THE dangers surrounding slurry gases are the focus of a new leaflet launched by the Farm Safety Partnership, chaired by the NFU. They have been the cause of a number of tragic and highprofile accidents in recent years resulting in the death of people and animals. Decomposition of slurry can release a cocktail of toxic gases including hydrogen sulphide and even a few breaths of the gas can render a person unconscious. The Farm Safety Partnership has produced the leaflet as part of its Stop! Think! Slurry Gas campaign unveiled at Grassland & Muck at Stoneleigh Park. Guy Smith, NFU vice-president, said: “Deaths from slurry gas still occur and these are made all the more tragic by the fact that so many people die who instinctively go to the aid of those in difficulty. “This new leaflet has 11 points to follow to reduce the risk of a slurry gas incident. But it is equally important to know that if there is a problem, stop the pump, get the person to fresh air, but don’t put yourself at risk, call 999 and advise the emergency services that slurry gas may be present.”

Mitas tyre’s pulling power AGRICULTURAL tyre firm Mitas has entered what it calls “the dynamic world of tractorpulling” by signing a sponsorship agreement with the European Tractor Pulling Committee. The agreement, however, goes hand-in-hand with the development of a new Mitas Powerpull tyre. The construction of the prototype of the new tractorpulling tyre is based on a manufacturing process similar to that for Mitas’ highhorsepower tractor tyres. “We are very confident in the successful development and launch of the new Powerpull tyre. Mitas can build upon its broad

The Mitas Powerpull – a new tractor-pulling tyre from the Czech-based manufacturer.

experience in manufacturing tyres for high-horsepower tractors,” said Andrew Mabin, Mitas’ marketing and sales director. “Durability, longevity and strength are the main characteristics of Mitas tyres, and the new Powerpull will be of its best example.”

L A N T HIRE H I R E LTD LT D PELL P ELL P PLANT

Groundworks & Construction, Civil Engineering Contractors t. 01754 881231 m . 07768 9 43722

The CT12, right, with William Morfoot’s other rather useful new piece of equipment, the Kirpy BPB 250 trackway recycling machine.

Manufacturer trumpeting its third most profitable year ever despite earnings drop JCB achieved the third most profitable year in its 68-year history in 2013, the company has announced. Earnings stood at £313 million (2012: £365 million) on turnover of £2.68 billion (2012: £2.70 billion). JCB’s machine sales stood at 66,227 (2012: 69,250) this was despite a fall in earnings and difficult conditions in the global construction market. JCB chairman Lord Bamford said: “The global market for construction equipment was more challenging throughout 2013 but I am delighted that, despite difficult market conditions, JCB delivered a strong performance and achieved the third highest profit in its history. “Turnover remained virtually unchanged year-on-year but volume and earnings were adversely affected by a slowdown in emerging markets, notably India, where JCB has a strong presence. This was further compounded by adverse currency movements in some economies.

The JCB 560-80 Loadall is one of the many fine machines that’ve help bolster the manufacturer’s profits.

“Turnover growth in the UK, Middle East and Africa during 2013 helped to offset reductions in India, Europe and the Far East. “I think 2014 has got off to a mixed start. Some markets are showing improvement, with stronger demand in the more developed markets of the UK and North America, which is offsetting weaker demand in

the more fragile economies of Asia, Latin America and Russia. “Political uncertainty created by elections in India and Brazil is also having an impact on markets.” JCB is forging ahead with long-term plans to increase capacity globally, with the company’s latest Indian plant in Jaipur starting production in May.

In the UK, JCB is pressing ahead with a £150 million plan to expand operations in Staffordshire, creating an additional 2500 jobs by 2018, with work due to start later this year on a new 350,000sq ft plant for JCB Cab Systems in Uttoxeter. A new factory will also be built in Cheadle, Staffordshire.

Lym d a le Cro ftLa ne, Cro ft, Sk egnes s , Linc s PE2 4 4 PF

A . G ric e & S on (a d ivis io n o f Pell Pla ntHire Ltd )

•L a n d d ra in a ge •Je ttin g •Ditc h m a in te n a n c e •L a ke s & P on d s ESTABLISHED O VER 50 YEARS AN Y REG IO N C O N SIDERED

Land D rainage Sp ec ialists


22 JUNE 2014

WWW.WRIGHTSREGISTER.COM

Sports & Hobbies

An excursion with Eve and the delectable Mr Briggs

Earning a crust in the countryside can be tough, but there’s no shortage of savvy and determined people giving it a go for the first time. In the first part of an occasional new series, Chas Baird meets Eve Higson and finds out about the business she’s running with the aid of a certain Mr Briggs... As a lot of traditional rural businesses are in decline it is good to see new small enterprises springing up. The first business that we are looking at is, in fact, so new that it hasn’t even been named yet! Eve Higson spotted a niche in the market and decided to do something about it. She is setting up to provide accompanied hacks around the very pleasant Worcestershire countryside.

Photographer Shirley and I went to visit the new outfit in Habberley, just outside kidderminster (once again I am struck by the fact that in the West Midlands you can go from travelling on busy A-roads to a rural backwater in minutes, and it is amazing just how quickly you can get clear of the conurbation). When I met Eve I began by asking her about her experience. It turns out that she is a classic, lifelong,

‘out of the pushchair – on to the pony’ rider. She has taught riding in both the mainland Uk and in Ulster, and has worked for the well-known racehorse trainer Jonjo O’Neill. The business plan is to offer accompanied hacks and treks around the local area, initially from Monday to Friday. As the business grows it is intended to expand to a seven-day service. It was then time to meet the rest of the staff.

Eve Higson and Mr Briggs quiz Chas on his horse-riding ability ahead of a jaunt around the byways of Worcestershire.

First up was Lucy, a 13.3hh mare of mixed breeding. When Eve found her she had been shamefully neglected and ill-treated – it is nice to record that she now seems a very happy and well-mannered little mare. She has a lovely nature and doesn’t look her 21 years. Next came the 15.2hh Dales cross Mr Briggs. Not an overly tall horse, but what he lacks in height he more than makes up for in muscle – he is an extremely good looking horse. I found it hard to believe that he was 19. A lovely old boy! When I originally spoke to Eve the plan we made was for us to go out on one of her short treks with me riding Mr Briggs. Time, however, did not permit and so Eve tacked him up and I rode him round the field. I have to say he was quite a

Messrs Baird and Briggs get trotting.

Chas turns horse whisperer with Lucy, 13.3hh mare of mixed breeding, who had been neglected by a former owner, but has since been nursed back to health. PHOTOS: SHIRLEY WALkER

contrast with the 16.2hh ex-eventing/hunting mare that I usually ride. Having said that, he is a cracking ride – his broad back makes him very comfortable to sit on, he is very well-behaved in a simple snaffle bit, and old gentleman or not he will still get a wriggle on when asked. His main virtue, from Eve’s point of view, is his steadiness – I would imagine that he makes a cracking novice ride! I asked Eve to tell me a little more about her operation. The idea is to make riding as accessible and as easy as possible. At the moment anyone from children (from about five years old) to adults, any age, up to about 5ft 10in and 14 stone is welcome. As the business develops it is envisaged that more horses and ponies will be added and instructional staff found – indeed, Eve was off to look at a horse later that day. For the complete beginner informal riding lessons are on offer; Eve has the use of a grass menage (schooling area).

Ideally, she would like to book a week in advance, but stresses that appointments are sometimes available at shorter notice. I think Eve has come up with a good idea – the availability of basic instruction and hacks and treks accompanied by an experienced, professional horsewoman should appeal to less-experienced riders, especially those who find the thought of going out on their own a bit daunting. We will be coming back in the future to see how Eve and the horses are doing – in the meantime we wish them the very best of luck. If any of our readers know of a small (ideally new) rural business that they think would be of interest then contact the editor, Dan Sharp on 01507 529463 or Chas on 07773 580983. For more information about Eve’s hacks and treks, call Eve on 07450 561944 or email evehigson@gmail.com More next time. Until then, keep the faith!

Take your best shot at remote-controlled plane in charity event A SHOOTING school is holding a charity day where participants can shoot at a radio-controlled aeroplane. Park Lodge Shooting School, based in East Yorkshire, is holding the event on Tuesday, June 10, in aid of the Yorkshire Air Ambulance and the Royal Agricultural Benevolent Institution, two charities with which Park Lodge’s owners, Tom and Sharon Bayston, feel closely associated. The charity shoot will comprise teams of four people shooting five flushes each, consisting of 100 clay targets. In addition to the flushes, one of the highlights of the day will be the chance for competitors to shoot at the GNAT, a remotecontrolled plane, which passes

shooters at speeds in excess of 60mph. Tom said: “We are delighted to be hosting this charity shoot and have already had lots of interest from people in the agricultural and related industries. “It promises to be a fun day with lots going on, and we hope that people will come along to support the shooters and help us raise money for these two charities. “We have had personal experience of the amazing work done by both the Yorkshire Air Ambulance and the Royal Agricultural Benevolent Institution, and we hope that we can raise a substantial amount of money to support both causes on the day.” Tel:01724 852359 Fax:01724 84 8775

Ste a dfa s t in a w o rld o fw a ve ring s ta nda rds

BILLIARD TABLEM AN UFACTURERS Ta bleFittin g ! Ta bleRen ova tion

Din in g Ta b les

Over40 years experience

O a k Ba rleyTw istCo m b in a tio n S n o o ker/Po o l/Din in g Ta b le

•La rgestock ofa n tiqu eta bles •Com bin a tion sn ooker/ d in in g ta bles •Alla ccessoriesa n d spa res •Tota lrefu rbishm en tofta bles •Deliverya n d in sta lla tion s ca rried ou tperson a lly •Fu llSizeTa blesa va ila ble

SPRIN G W OOD LOD G E,ERM IN E STREET,APPLEBY,N R SCU N TH ORPE,LIN CS.D N 15 0D D Em ail:sales@ cheshirebilliards.co.u k

w w w.ch e sh ire b illiard s.co .u k

The charity shoot is open to everyone and the fee to enter a team of four is £280. As well as entering teams, there is also the opportunity for organisations to sponsor sections of the shoot, with areas around the shooting ground available for stands/exhibits. Refreshments will be available in the clubhouse for

both competitors and spectators, and parking at the venue is free. Bob Smailes, regional fundraising manager of Yorkshire Air Ambulance, said: “We’re really pleased that Park Lodge Shooting School has chosen Yorkshire Air Ambulance as one of the charities to support with this event and hope that lots

of people go along and enjoy the day.” For further information about entering the Park Lodge Agricultural Industry Charity Shoot and sponsorship opportunities on the day email info@parklodgeshootingschool. co.uk or ring 01405 764500. Registration is from 9am and shooting starts at 10am.

Ready-aim-fire! The shooting party at Park Lodge has its sights set on a big score for charity.

Feathers fly as young farmers battle their way to the top PILLOW-fighting was among the competitive classes at the Lincolnshire Young Farmers’ Annual County Rally from which North Holland YFC emerged as champions. The event took place at Abbey Farm, Bardney, near Lincoln, on May 19, with the 87 classes split into two categories – working and exhibition. In addition to the less orthodox pursuits, stock judging and forklift handling were also part of the working section. In the exhibition class there was everything from a handmade egg rack to a scrap metal sculpture, intended to evoke memories of the two world wars. Out of the 15 Young Farmers’ Clubs from Lincolnshire taking part, North Holland proved to be

one of the strongest by bringing home eight trophies out of 20 available. The trophies collected were for the club with the highest total points (the club won with 599 points), flower arranging, pig judging (congratulations to Sam Firth), highest points in junior exhibition classes and junior rally classes, and highest marks in the craft, senior exhibition and senior rally classes.

The county rally was rounded off by a dance, where competitors and friends of Lincolnshire Young Farmers’ Clubs got to let off steam, and North Holland YFC got to revel in their success. A spokesman for North Holland YFC said: “All in all, North Holland YFC has topped off a fantastic year defending their claim to the county rally title. “The standard of all participants

this year and the level of sportsmanship between rival clubs has been exceptional. The county rally was a fantastic day, both for spectators and competitors. “North Holland YFC would like to thank the members of the advisory committee for the support they provided to the club in preparation for the rally, and to our competitors for doing the club proud.”

Absolutely champion – the North Holland YFC team with their haul of trophies.


WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see page 19

JUNE 2014 23


WrightsClassifieds 24 JUNE 2014

WWW.WRIGHTSREGISTER.COM

To advertise tel: 01507 524004 fax 01507 529499 ATV

SPECIALISIN G IN AR CTIC CAT Q UAD B IK ES N ew , Ex D em o a nd Sec o nd Ha nd B ik es a va ila b le

ALL N EW B IK ES CO M E W ITH 2 YEAR S W AR R AN TY N EW D IESELS IN ST O C K , O FFER IN G EC O N O M IC AL FU EL C O N SU M P T IO N . R IN G N O W FO R C O M P ET IT IV E P R IC ES.

tel: 01327 261023 m o b : 07775 684401 hw hite@ a fm a c hinery.c o .u k w w w .pjs ervic es .eu

W e s ell a fu ll ra nge o f Co nc eptM o w ers a nd Po w erHa rro w s W e a ls o s u pply a fu ll ra nge o f Ac c es s o ries fo rQ u a d B ik es inc lu d ing: A llA rcticCatQuad Bike Accessories•M ounted and Trailed S prayers,M ow ers,Flailand Rotary •Trailersetc. Priors Marston Road | Hellidon | Daventry | NN11 6GG

BUILDINGS


JUNE 2014 25

WWW.WRIGHTSREGISTER.COM

ROOFING & CLADDING SHEETS PLASTISOL - POLYESTER INSULATION - PURLINS METRE COVER “ONDULINE STOCKISTS”

DIRECT FROM THE MANUFACTURER

Unit 6, Capelhendre Ind. Estate, Nr. Ammanford, Dyfed SA18 3SJ

Telephone: 01269 831869 Fax: 01269 831870

•B AR N S R E-CLAD •STEEL CLAD D IN G SUPPLIED Box Profile Straight C orrugated Straight & C urved

Tel.01366 382294 Fax 01366 382878 Eastern C ounties H um ber to the Tham es

B U S S EN S & VIGR AS S

MAX LAST CONTAINERS CONTAINERS FOR SALE OR HIRE

new and secondhand

B. POPE & Sons Ltd. Cattle Buildings Grain Stores Potato Stores G.P. Buildings

STEEL FRAMED BUILDINGS AND CLADDING

Workshops Industrial Units Extensions Refurbishment & Alterations

Design, Fabrication, Erection, Cladding or Supply Only

Church Farm Yard Sempringham Sleaford Lincolnshire NG34 0LU Tel/Fax 01529 241493 - website : www.bpopeandsons.co.uk - email : sales@bpopeandsons.co.uk

ALL SIZES OF SHIPPING STORAGE AND REFRIGERATED CONTAINERS Tel: 01394 387728 Fax: 01394 388826 Mobile: 07860 413994

user@woodbridge41.fsnet.co.uk Nationwide Service


26 JUNE 2014

WWW.WRIGHTSREGISTER.COM

BUILDINGS

GENERATORS

LIVESTOCK

To advertise call Laura on

CONTRACTORS

01507 529353

LIVESTOCK

GENERATORS

EQUIPMENT

MOORE’S YARD, HEMINGBY LANE, HORNCASTLE, LINCS LN9 5PN

• BULK FEED BINS • • PIG & POULTRY FEED SYSTEMS • • DRINKER SYSTEMS • Contact:

K. BARK 07957 568 954, R. MOORE 07957 568 955 TEL: 01507 522386 FAX: 01507 522061

www.valelivestock.co.uk


JUNE 2014 27

WWW.WRIGHTSREGISTER.COM

LIVESTOCK

MACHINERY FOR SALE

MACHINERY FOR SALE


28 JUNE 2014

WWW.WRIGHTSREGISTER.COM

MACHINERY FOR SALE

C LUTCHES

CLUTCHES and m ore CLUTCHES Also FLY W HEELS

Allm akes-TRACTORS, COM BINES and TRUCK S

01724 855711 w w w .clutchnet.co.uk w w w .clutch-m anufacturer.co.uk

BRO W N S O F LI VERS E DG E FOR

NEW & S/H BELARUS TRACTORS

spare parts also available

Tel: 01924 404534


WWW.WRIGHTSREGISTER.COM

JUNE 2014 29


30 JUNE 2014

WWW.WRIGHTSREGISTER.COM

MACHINERY FOR SALE


JUNE 2014 31

WWW.WRIGHTSREGISTER.COM

MACHINERY FOR SALE

SERVICES

P.V. DOBSON & SONS New Perkins Engines and Spares New 3 cyl to suit MF/JCB/Leyland New 4 cyl to suit MF/JCB/Case/Manitou etc New 6 cyl to suit MF/JCB. 200+ other new engines in stock Inc. industrial spec turbo and standard

COMPRESSORS For new and reconditioned air compressors and associated equipment contact the experts

T.A. INDUSTRIES 01427 668436

Next day nationwide delivery service from ÂŁ35.00 Credit cards accepted P.V. Dobson & Sons (ask for Ryan) Levens, Kendal. LA8 8PG Tel: 01539 560833 Fax: 01539 560675 e-mail: parts@pvdobson.com View engines on www.pvdobson.com Mobile: 07843 314 695 *Prices subject to VAT

SECURITY

SERVICES SERVICES

WANTED


32 JUNE 2014

WWW.WRIGHTSREGISTER.COM

SPRAYERS & SPREADERS

TYRES

SPRAYERS & SPREADERS

Wrights Farming Register covering the heart of Englandâ&#x20AC;&#x2122;s farming community from the Thames Valley to the Scottish Borders TRAILERS


WWW.WRIGHTSREGISTER.COM

JUNE 2014 33


34 JUNE 2014

WWW.WRIGHTSREGISTER.COM


1

AUGERS

S6557 Transmatic 36Ft 6” auger c\w 5HP 3 phase motor, Galvanised tubes on adjustable stand with 2 wheels. Stored inside Good condition £600 % Shaun 07850 978188 S7117 34 Ft 4.5” Transmatic auger c\w 3 phase motor and cleaning section in First part. 2 small wheels. Good condition £450 % Shaun 07850 978188 S7028 BRICE BAKER 20ft Transmatic 4” Flight fitted with cleaner mesh on Upper tube. 3 Phase motor, winch up & down and 2 Wheels. Good condition £375 % Shaun 07850 978188 S7184 RECO 20ft Straight auger c\w 3 phase motor Good condition % Shaun 07850 978188 S6605 RECO Recomatic 6” Transmatic auger appx 28ft long c\w 3 phase motor & armered cable. Has Double castor wheels each side to move. Kept inside Good condition £500 % Shaun 07850 978188 C6815 DISCHARGE Auger to suit outdoor grain silo unloading, straight type fits in tube below silo floor, 6” diameter all galvanised 16’ long to suit 24’ diameter round silo or similar, 3 phase 5hp electric motor drive at discharge end Good condition £395 % Chris C 01926 338639 C6965 BRICE BAKER Transmatic trolley auger, 8” diameter all galvanised 43 ft long, large receiving hopper with set castor wheels below, pneumatic rubber tyres on triangular main frame, winch wire height adjustment, flexi pipe discharge attachment, drawbar, 15hp 3 phase electric motor drive, some wear on lower auger section but high capcity machine Good condition £1,395 % Chris C 01926 338639 S7183 RECO 40ft Transmatic 6” auger. Mounted in A frame c\w wheels and small reception hopper. Recent Repairs so very sound Very Good condition £900 % Shaun 07850 978188 C6768 ASTWELL Straight 20 ft long 6” diameter galvanised grain auger, bottom inlet slide with handle, 3 phase 5hp motor at discharge end, done little work as paint still on auger flights Very Good condition £450 % Chris C 01926 338639 S7211 IDEAL MAYRATH 4.5” Straight Auger 16ft long c\w 4 HP Belt driven 3ph motor. And 1- 3.5” Direct drive 16ft Auger c\w 4HP 3 ph motor. Also Transmatic 6” auger appx 35FT long c\w 2 wheeled carriage & motor Good condition % Shaun 07850 978188 S7182 RECO 27ft Straight Auger Fitted 4 HP motor & Adjustable height wheels to Unload corn bins. Recent New flight Very Good condition £400 % Shaun 07850 978188 S7180 ASTWELL Transmatic 6” Auger appx 40 - 42 ft long c\w std & castor wheels plus tipping hopper % Shaun 07850 978188

2

S6993 WELGAR RP 435 Variable diameter Round baler (3 - 5ft 6” By 4ft) 2.1m Pick up with Rotofeed, Side feed augers & chopper. Nett Wrap & Bale Ejector. Good Example of this market leader. Very Good condition £13,500 % Shaun 07850 978188 S7104 1996 HESSTON 4900 Big Square baler. 2m pick up, 28 -26L tyres, Half tailgate ejector. Cleaned down and waxoiled inside.Under 80,000 bales. Very Good condition £11,000 % Shaun 07850 978188 F3513 MCCONNEL Bale Packer Mcconnel bale packer makes packs of 16 or 20 convential bales, trailed unit with drawbar and chute system, to fit behind convential baler, used in 2012 season. Cherry Products Bale Gripper included! Very Good condition £8,000 % 07503 531889 C6992 JOHN DEERE

459 pick-up conventional baler, 2001 model with hydraulic bale density control & central auto lubrication system, 1.9m wide pick up with manual ratchet control from cab, rope control to slewing drawbar, wide angle pto, road lights, 10.00/75-15 & 7.0012 tyres, all good paintwork & guards done farm work only (approx 5k bales/year), serviced by JD trained technician & in good working order. Available with Cooks windrowing model flat 8 accumulator, Browns Buzzard flat 8 handler (Matbro fittings) & Tanco 56 bale trailed transporter at extra cost if required (baler & full handling system) Good condition £5,495 % Chris C 01926 338639 C6934 KVERNELAND 806 Straw bale chopper/bedder (Kidd design), linkage mounted pto drive with front pneumatic support wheels, twin outlets (one each side), cutting blades on central rotating chopper bed in tub base can have additional knives fitted, round tub size 1.88m diameter suits round, big square or small bales Good condition £1,250 % Chris C 01926 338639 C6860 MASSEY FERGUSON 828 Round balers, choice of 2 with machine for spares, 6 belt type can make up to 6 foot high bale, 2m wide pick up, one machine has net wrap system, spare machine has rubber gathering wheels, both machines in full working order - same baler as Greenland Vicon model. All dry stored Good condition poa % Chris C 01926 338639 C6968 JOHN DEERE

BALERS AND BALE HANDLING

C6864 BROWNS Tipper big bale accumulator for operation behind big square bale to deposit 2 or 3 bales together on tilting bed, currently fitted to New Holland BB940 (800 x 900 bale) & used for 2 bales, pair pivoting castor wheels below fitted 7.50-10 tyres, hydraulic operation from tractor with in-cab control box. Baler drawbar/brackets & pipework complete, all straight in working order last used 2011 Good condition £1,150 % Chris C 01926 338639 C7003 ELEVATOR Suit small bales, strong box section framework with Colman spiked chain conveyor system powered by single phase electric motor, 28’ long, winch wire height adjustment from rubber tyred chassis, galvanised top chute with end roller assists bales to exit correctly Good condition £525 % Chris C 01926 338639 S7100 0190 MF 2170 190 by 120 Big Baler Ist used July 2011 and only baled 16200 bales. Fitted 2.25m pick up with end wheels, Knotter blowers and 700/50 - 22.5 tyres. Unmarked Excellent condition £53,000 % Shaun 07850 978188 F3512 WELGAR AP630 Serial Number: 1135-04-5199. Mid 1990’s. In working order and will go straight to work. Has been barn stored and the paint is generally good for its age. Baled an average of approx 7000 bales per year for the last 10 years. Operators manual and parts list for the baler. £5,450 % 07503 531889 S6208 WELGAR RP150 5ft by 4ft Belted round baler c\w mechanical twine tying. Fittted Road lights. Stored inside. Average condition £950 % Shaun 07850 978188 C6686 NEW HOLLAND D1000 Big Square baler, 1996 model in red & yellow paintwork (one of last made with all later secification), makes 60cm x 90cm bales (2’ x 3’), 2m wide pick-up with feed augers & rubber tyred wheels, 4 knotter system with central lube system & twine box carriers either side, hydraulic bale density control, all good pto drive with wide angle coupling, 16.5L16.1 tyres, road lights, all good straight panelwork, done approx 95000 bales Good condition poa % Chris C 01926 338639 C6726 LAWRENCE EDWARDS Supa Pac static bale wrapper, tractor linkage mounted with remote control requires hydraulic spool valves to operate machine, 4 belt table with tilt ram, 500mm plastic wrap spool facility, unused & dry stored needs turntable operation repair Good condition £850 % Chris C 01926 338639 S7219 2001 MF 185 80 by 90 / 3 by 3 Baler, well maintained and sensibly used in good order c\w Bale ejector rollers, Brakes & lights. 215L 15/16 tyres ( one new) Good condition POA % Shaun 07850 978188 S6706 INTERNATIONAL 440 Convention small square baler , well maintained and ready to work. Good condition £1,000 % Shaun 07850 978188 C7012 WELGER

RP12S Round Baler, 1990 model in full working order, net wrap system for 4’ wide bales, 1.9m wide pick-up reel with side augers & steel gauge wheels, steel dimpled forming rollers, rear bale kicker bar, all straight guards & good paint, chain oiler system, net/twine storage boxes either side, road lights, in cab control box replaced with on/off switch for wrap sequence Good condition £2,750 % Chris C 01926 338639

JUNE 2014 35

• See also the wanted section and read the buying/selling details before calling

WWW.WRIGHTSREGISTER.COM

582 Round baler 2002 model with crop cutter system & cover edge wrap facility, 2m wide pick-up with wheels & adjustable wind guard, 540 pto drive & wide angle shaft, net & string wrap with additional net spool carrier at front. Top specification machine including 19.0/45-17 wide tyres, Bale Track Plus in-cab monitor - for adjustment on the move of bale diam, net wrap turns, cutter knives in or out, reverse rotor, bale density etc. 6 x textured bale forming belts, rear bale kicker, hyd pick-up lift, road lights & rear work lights, instruction book. Baler is in stunning straight original & clean condition, fully guarded with chopper filler plates and all bright unmarked paintwork - a credit to its owners. Excellent condition £7,550 % Chris C 01926 338639 S7034 BAMFORD BL 59 Conventional Square baler c\w 5ft Pick up. Good tyres, All staright but average paint (no rot) plus bale sledge Average condition £350 % Shaun 07850 978188

3

BEET HARVESTING EQUIPMENT

S6873 RATIONAL Nova Hydro 3 Row Trailed tanker beet harvester with front mounted offset topper, feeler & knive crowning, self steering lifting,opel wheels, 2 cleaning turbines steering drawbar & steerage disc. Adjustable axles with 14.9/80 - 24 tyres with 70% tread. Good sized tank appx 4 - 5 ton. Average condition £1,500 % Shaun 07850 978188 S6659 STANHAY Rocleaner R60 Hydraulic Folding Interow how configured for 8 rows but could be extended.Will Mount on Front or back of tractor Good condition £1,000 % Shaun 07850 978188 S6801 HESTAIR Todd Contractor Mk1V Plus Cleaner loader, Shaft drive, Lister Petter Diesel, Rod link Cleaning and elevator, Tidy for age Good condition £1,200 % Shaun 07850 978188 S6931 CTM Super 120 Cleaner Loader with continenttal Main web & Rod link Cleaning web. 4 Wheel chassis with 11.5/80 - 15.3 tyres. 3 Cylinder electric start diesel engine. Good condition £1,800 % Shaun 07850 978188 S7198 HOUSEHAM 12 Row Front mounted, hydraulic folding Beet hoe with very good shares, average paintwork. Some spares Good condition £800 % Shaun 07850 978188

4

BUILDINGS/ STORES

C6969 DIVIDING WALL Steelwork & runners etc. to provide a sectional structure 20’ long & approx 11’ high for use in making a temporary divider to a conference/training/exhibition hall/ farm shop room. Each section 4’ wide & concertina into frame for storage with top track system, requires panel sections to be attached to steelwork. Taken down ready to move. Good condition £475 % Chris C 01926 338639 S6173 CROPSCAN 15 Potato store control system. All Electric controls plus 6 controllable Louvred Vent panels, 2 - Woods 4ft Diameter 28kw Ventialtion fans and Tapered Kerouin Floor panels 38” By 20” By 1.75” To do appx 24m by 30m (These sort require prepared concrete floor with ducting cast in) Good condition £3,000 % Shaun 07850 978188 S3751 MOBILE Homes Various types available either 12 or 10 ft wide. Generally 22ft or 28ft long suitable for accomodation or office. Prices according to age. Even some late models if required % Shaun 07850 978188

C6798 CRITAL Steel galvanised panels ex indoor grain silos, square profile type all taken down ready to transport. 3 metre (9’10”) long panels x 10 & 2.4m long panels x 16 complete with starter & finisher panels. Includes some corner posts (main panels provide 40” depth bolt to bolt) Good condition £650 % Chris C 01926 338639 C6752 CONCRETE Panels as used on silage pit walls, size 6 feet long x 18 inches wide which bolt together, trough shape will stand on a concreteblock to give extra height. Quantity 55 to be sold as one lot, old but sound Good condition £650 % Chris C 01926 338639

5

COMBINE HARVESTERS & EQUIP

C6927 NEW HOLLAND TX36 Combine Harvester, 1991 model with 2979 rec hours on Iveco engine, hydro transmission, self levelling sieves, straw chopper & chaff spreader, thick wire concave, good front elevator & slats, aircon cab with black steering column, 800/65R32 Michelin wide drive tyres & 16.0/70-20 steering tyres. 20’ header with lateral float, spare knife, new fingers fitted 4 seasons ago, all straight feed auger & reel, Matrot 1.4m (4’6”) 12 volt side knife wired to cab & on folding arm bracket to move from operating position. Mekanag header trailer. Very tidy combine with all straight panelwork, good belts & bright paintwork all dry stored, service history, second owner from new. Very Good condition poa % Chris C 01926 338639 S7228 1989 NEW HOLLAND TX 36 20ft Combine, 30.5 - 32 tyres, Straw Chopper, Fixed grain shoe appx 3500 Hours. Quick sale required Good condition £15,000 % Shaun 07850 978188 S6668 1997 NEW HOLLAND TX 68 20FT Cut combine with lateral float on header and self levelling seives. Only 2300 Drum hours. Chaff spreader and strawchopper. Goodyear 800/65 R32 fronts and 16/70 20 rears. Genuine Combine Very Good condition £39,000 % Shaun 07850 978188 S7206 2012 MORTL RT 135 Vertical Knife 1.35m 12v electrically driven knife, made in Germany, supplied by Spaldings. Very little used on Case IH 1680 combine Excellent condition £600 % Shaun 07850 978188 S6928 NICHOLS 2066 Heavy Duty concave for John Deere 2066 combine, only used one season Good condition % Shaun 07850 978188 S7163 1989 MF 38 Combine with 18FT Cut Powerflow table & bed trolley. Fitted Strawchopper & Yeild per field. This outstanding example has been fastidously maintained and is probably the best example of its kind I have ever seen Excellent condition £14,500 % Shaun 07850 978188 S7224 2004 ZUHN Vertical Knife Mechanically driven model to fit New Holland TX combine. Very tidy, little used Very Good condition £800 % Shaun 07850 978188 C6876 NEW HOLLAND TF46 Combine, 1992 model with 4 speed hydro transmission & Merc V8 engine, 4455 rec hours, aircon clean cab, Nichols concave fitted in 2008, recent new 30.5R32 drive tyres, wide section Trelleborg 500/60-22.5 steering tyres, machine had full service and many new parts for 2013 season with cost of £9k (primary shaft belt, recon self levelling ram, header auger clutch & vari sheave etc etc. all documented). 24’ header with black painted reel on trailer, wobble box knife drive, dividers, fully guarded. Machine is all very straight including unload auger & all guards with good paintwork - all dry stored. Good value well maintained high output combine Very Good condition £17,750 % Chris C 01926 338639 C6830 CLAAS Dominator 108 Classic Combine Harvester, 1994 manual model with Merc 180hp engine, straw chopper, 23.1R30 Firestone drive tyres 85% good tread, 14.5/75-20 Continental rear tyes all good, 6 straw walker machine, second owner from new, refurbished unload auger, clean cab with working aircon, cylinder & concave all straight with good front elevator chain & slats, good paintwork for year and all straight guards & panels (lives inside), good drive belts, engine hood & grain tank cover fully working, grain loss monitors, 4252 recorded engine hours. C510 (17’) header on trailer with spare knife, lifters & dividers, good bottom skids, wobble box knife drive, straight guards, reel & auger, tidy paintwork. Combine has some small internal repairs - all cleaned off oiled & ready to go with a service Good condition poa % Chris C 01926 338639 S6358 1989 NEW HOLLAND TX 36 Combine with lateral float header, Air Con Cab, Nicholls Concave, Straw chopper, chaff spreader. 20ft cut Self levelling shoe. Well maintained machine appx 3500 hours. Good condition £19,000 % Shaun 07850 978188

6

COMMERCIAL VEHICLES & EQUIP

S7085 TOYOTA Hi Lux Hardtop Fits Pickup body of Double cab models 2005 onwards. Has Roof rails in ventilation openind side windows. Finished in silver. Good condition % Shaun 07850 978188 C6739 MAN LE220C 7.5 tonne flat bed truck, 220hp 6 cylinder 2001model with 6 speed gearbox, double sleeper cab, 3271200 rec kms, 7m long timber ply body 2.4m wide with high front headboard plus mesh screen behind cab, floor height 1.3m above ground, single rear axle fitted 225/75R17.5 all good tyres, built as drag trailer specification, rear drawbar & air pipes, twin fuel tanks, leaf spring suspension. Very tidy unit for hay/straw carting or would make classic tractor transport with body adapted as beavertail Very Good condition £3,295 % Chris C 01926 338639

7

CRAWLERS & EQUIPMENT

C6788 FIAT Crawler Bottom Track Rollers suit 100/120 models, all refurbished with 45mm gap between roller sides, quantity 8 plus pair additional rollers similar. Also Centre Actuator unit for Hymac 580C 360 degree excavator, fits to centre pivot slew mechainism, fully reconditioned - this priced at £495 Very Good condition £850 % Chris C 01926 338639 S6859 TRACK MARSHALL Weight Set Suit TM 90 Crawler, 16 Jerry Can type weights each appax 120lbs. Sustanrial weights. Good condition £600 % Shaun 07850 978188 S5262 1982 TRACK MARSHALL 155 Crawler c\w cab & 3 pt linkage. 3507 hours so Runs well but running gear worn. Plated by TrackMarshall to confirm differential update. Average condition £1,750 % Shaun 07850 978188

8

CULTIVATION EQUIPMENT

S6978 COUSINS Packa Rolla Single Row DD Ring Hydraulic folding press. 9” spacing, Road lighting. Transport wheels to rear. Appx 13ft 8” working width. Very Good condition £4,500 % Shaun 07850 978188 C6599 TWOSE Spring Tine cultivator, 14’ wide linkage mounted with 3 rows tines, rear drawbar frame, end hitch ‘A’ frame for transport, total 33 tines with 3 broken, 22 spare new points, blue paintwork Good condition £400 % Chris C 01926 338639 S6696 SIMBA Single Press 5.5m Wide Standard 18” cast rings, hydraulic folding, plus leading tines and wheels to transport at back Good condition % Shaun 07850 978188 S7190 REKORD 5 Tine Drag, 2m wide frame. Mounted model. Average condition £150 % Shaun 07850 978188 S6886 DOWDESWELL Powavator 130 11ft Spike rotor, 1000 rpm c\w twin hoods and steel wheels. Tines about 6” % Shaun 07850 978188 F3544 SIMBA CA10 Set of 10m hydraulic folding Cambridge rolls with alternate breaker rings. Well built and incredibly strong. Plenty of metal left on the rings. Good hydraulic hoses. Good tyres and a set of road lights. Very Good condition £7,500 % 07503 531889 S6917 SKH 3000 Crumbler 3m Wide with 12 rigid tines, good crumblers etc. Close coupled Linkage. Good condition £900 % Shaun 07850 978188 C6753 KONGSKILDE Triple K spring tine cultivator, mounted 9’ wide with 25 ‘S’ type tines in 4 rows, pair depth wheels one steel & one solid rubber. Suit small tractor much sought after in spring 2013! Good condition £425 % Chris C 01926 338639 C6781 PIGTAIL Cultivator fixed width linkage mounted 4 metre wide ex Browns Hectavator fitted 1” square section pigtail tine x 16 in 3 rows, rear solid section 18” diameter Flexicoil in full width frame with pin & hole depth adjustment on side arms. Strong machine with 5” square box section frame Average condition £795 % Chris C 01926 338639 C6732 FLEXI COIL Trailed 4.2m wideTwin Press, non folding model with rear depth/transport wheels fitted 340/65R18 tyres, hydraulic ram on drawbar to main frame pivot, cast 30 degree press rings 24 front & 25 rear with 170mm spacing plus scrapers, transport lock valve, ideal for use as single implement or as combination tillage train. Some spares Good condition £1,975 % Chris C 01926 338639 S7081 HOWARD HE 70 Roatvator, 70” wide, 1 wheel & skids. Recent blades, very tidy Good condition £1,000 % Shaun 07850 978188 S6922 FLEXICOIL 3 & 4m Coils Complete Flexicoils, 2 x 3m C\w recent bearings and 1 x 4m also with bearings in Very good order Very Good condition % Shaun 07850 978188 S7189 PERRY 3m 2 Bar double coil pigtail tine cultivator built of 100mm box section. Needs a lick of paint otherrwise OK Good condition £175 % Shaun 07850 978188 S6525 Pigtail Tine Drag, 17ft Hydraulic folding, 3 bars 100mm frame, Sturdy tool with 1” section pigtail tines. £1,700 % Shaun 07850 978188 C6687 SIMBA DD Ring Trailed 3.3m double press with 600mm diameter all good rings & depth/transport wheels at rear, refurbished in 2009 and unused 2013, total weight 2640 kgs, can be used alone or behind disc harrows etc. Very Good condition £5,450 % Chris C 01926 338639 S6853 GALLUCHIO RDA 660 Trailed 6.6M folding Press with levelling boards followed by 2 rows of Cast iron rings. Transport wheels with 300/50 -17 tyres. Good condition £5,500 % Shaun 07850 978188 S6990 2007 SUMO Trio 3m Mounted machine with 6 Ultra low draft shearpin legs fitted with Delta winged points, Discs & 760mm Multipacker Very Good condition £10,900 % Shaun 07850 978188 C5458 HE VA Disc Roller (Doublet) trailed 4m wide hydraulic folding, 2005 model, 2 sets front notched Sabre discs 500mm diameter recently fitted with hyd ram adjustment fo depth/aggression (DSD), adjustable soil mat prior to single row of 32 x ‘V’ profile packer rings with scrapers, rear carriage with 400/60-15.5 tyres, side soil retainers on sprung arms, road lights. Recent soil mat curtain fitted. Machine can be used for straw incorporation, on ploughing or as small seeds establishment tool (eg Rape seed) with Variocaster mounted on rear Very Good condition £9,950 % Chris C 01926 338639 C6952 KVERNELAND CLC EVO 3 metre wide cultivator, 2 seasons use only - total 600 acres, 7 front tines with leaf springs above fitted Evo wide (duck foot style) all good points at 420mm spacing, followed by set angled levelling discs with Kverneland steel packer roller at rear which is both detachable & adjustable for working depth. Suitable for stubble cultivation or in ploughed/cultivated land as machine can operate at all depths. Genuine reason for sale Very Good condition £7,450 % Chris C 01926 338639 C6647 FARM FORCE Front Press 3m wide fitted 700mm diameter 45 degree cast rings in set of 4 +9 + 4 across frame, model number F3300W with front module all adjustable for height of 2 rows spring tines, steering headstock, cleaner chains & greasable bearings to press rings, all good red & black paintwork, machine done little work Very Good condition £3,295 % Chris C 01926 338639 F3428 REEKIE RDPH 2 Twin Body potato ridger with hydraulic break backs. Machine has only done approx 100ac. Paint getting flakey but metal work very good. Complete with bout markers Very Good condition £650 % 07503 531889 C6741 COUSINS Packa-Rolla 4.6m (15’) trailed hydraulic folding twin cultivator press (900kgs/metre weight), fully adjustable drawbar, 2 rows front adjustable height leading tines, cast 24” LP press rings quantity 23 front & rear, 12.5-15.3 tyres on rear carriage, centre folding to 2.5m transport width with lock bar, may need a couple of hanger bearings Good condition £4,895 % Chris C 01926 338639 C6748 MICHAEL MOORES Frame & wheel carriage ex 4.5m double press machine, yellow painted box chassis with single ram for folding wing mechanism, 11.5/80-15.3 tyres. No press rings fitted so could be adapted to make trailed 2 leg mole plough etc. photos available Good condition £1,400 % Chris C 01926 338639 S6524 LEMKIN Kompactor S300 3m Tined cultivator. c\w levelling boards and crumblers Very Good condition % Shaun 07850 978188

S7148 BLEC Multi Scraper Mounted Grader for compact tractors c\w 2 wheels at back hydrauically controllable for depth. Up to 6 Soil loosening tines and blade tp scrape Good condition £650 % Shaun 07850 978188 S6559 AGRICAST 20” Press Rings 30 degree cast iron 50cms Diameter, 30 of bought & never used. Plus 4 Shafts each 1m long by 45mm and af ew bearings. New condition % Shaun 07850 978188 S7199 SIMBA

C6999 CONCEPT Speedtill 400 heavy duty trailed multi function cultivator, 4m wide with centre pivot system allows machine to rotate long ways for transport, 1999 model with large box section frame. Front clod board followed by set of 20 square section pigtail tines in 2 rows, double 450mm dia steel packer rollers & scrapers with additional set 2 rows of pigtail tines inbetween, rear depth/transport wheel carriage fitted 11.5/80-15 tyres, incab control box for work & transport settings all hydraulically controlled Good condition £3,325 % Chris C 01926 338639

9

DTX 300 3M wide top working cultivator c\w Fine Seeder unit with 5 outlets. Good 450mm angled discs and DD Rings Very Good condition £11,950 % Shaun 07850 978188 S6844 STEGSTED 9 Tine Mounted 9ft wide drag with 9 springloaded tines and 2” reversible points. Good condition £300 % Shaun 07850 978188 F3269 FARMFORCE Front Press 1.5m, steering frame with rings approx 50% worn. Average condition poa % 07503 531889 S6750 LEMKIN 2m Crumblers To Fit 4M Thorite 9 Cultivatoror similar. 2- Multi tubular crumblers c\w frames to attach to machine with bearings etc. Tried once hence as new Excellent condition % Shaun 07850 978188 S7006 H BUSHELL AND SONS Cambridge Rolls Conventional set of 8FT plus 2 - 4ft Pups. Exceptional 20” crimps look hardly used. Unusual for their age. Very Good condition £900 % Shaun 07850 978188 C6399 KVERNELAND Trailed Press 4 metres wide (non folding) made up from set of 700mm diameter furrow press rings (25 in total), axle sets with 2 x 7 ring & 1 x 11 ring, cleaner chains, screw adjuster for drawbar height, rear depth wheel module hydraulic ram raise & lower with 12.5-15 tyres. Concrete ballast block in centre frame, can also take tractor weights on frame bars for extra ballast. Set spare rings on shafts (could be made double press) Good condition £1,400 % Chris C 01926 338639 F3431 COUSINS Dutch Harrow 4m levelling harrow with manually folds to 3m. Points in good condition but a few missing. No levelling board or roller. Good condition poa % 07503 531889 S6948 TIMAG 4m Drillmate Tined cultivation unit to mount under power harrow or independantly on front linkage. 1st row Rigid and 2nd row of tines. Good 380/500mm packer with scrapers Good condition £1,250 % Shaun 07850 978188 S7197 VADERSTAD

10

NZ 6m Trailed Hydraulic folding Springtine cultvator with wheel eradicator tines, Levelling boards, Agrilla Nova tines, 8 depth wheels and following harrows. Very Useful tool Good condition £4,850 % Shaun 07850 978188 S7054 RECO Maschio 4 Head Interow Rotavator. Used to work land between 4 sugar beet rows 20” apart. Toolbar appx 8ft long. Done very little work Very Good condition % Shaun 07850 978188 S7123 FLEXICOIL Single Press 1.7m Wide for front mounted use. 26” Rings 6” apart. Has A frame mounting for use with flexicoil Front linkage (Available see S7122) Features limited steerage over nylon slider and Stands. Very Good condition £650 % Shaun 07850 978188 C6913 ZIG ZAG Harrows hydraulic folding linkage mounted 8.2m (27’) wide, 9 sections fitted 1/2” thick square tines pulled by drag bar, twin ram system operating on 4” x4” box section main frame painted green (probably Cousins) Good condition £795 % Chris C 01926 338639 C6891 TULIP Vario 300XL Multidisc (marketed by Teagle) one pass 3m wide tractor linkage mounted cultivator, 2011 model done little work with fully retractable legs on hydraulic rams. Front cutaway rubber mounted angled discs 540mm diameter followed by 6 winged 850mm adjustable height legs with Solo shin pieces, rear discs as front 550mm dia, Guttler roller rear packer 560mm type on pin & hole height adjust arms, steel side soil deflector plate (adjustable on offside). Accumular pressure pack to tine legs. Top spec machine with all good paint etc. Very Good condition £9,995 % Chris C 01926 338639 S7188 KONGSKILDE Vibroflex 3.3m Mounted model; with cat 2 crosshaft and 2 steel wheels, Pplus 2 half meter manual folding wings to make it up to 4.3m Good condition £750 % Shaun 07850 978188 S7187 KONGSKILDE 4 Bar Springtine 5m Wide, hydraulic folding with tripleK Springtines, reversible points and 4 steel wheels. Folds down to under 2.9m Good condition £400 % Shaun 07850 978188 S6403 SIMBA Single Press Trailed 1 Row cast 24” Ring press, 6” spacing c\w end tow kit. Good condition £1,600 % Shaun 07850 978188 C7000 COUSINS 5.49m (18’) wide trailed Packa-Rolla double ring cultivator press, hydraulic folding 1995 model with recent new cast rings on half of 54 press ring system, front set rigid tines in 2 rows followed by 24” diameter all good ring sets with scraper bar, rear depth/transport carriage with good tyres, adjustable drawbar settings, road lights Good condition £6,595 % Chris C 01926 338639 S7196 GLENCOE Soil saver 4.5M Mounted model with appx 24 sprung C tines and 2 wheels. Fold to 3m. Great for airing wet soil. Good condition £700 % Shaun 07850 978188 S7121 14Ft Springtine Standard Single S tines on 4 bar manual folding frame, Some spare tines. Average condition £300 % Shaun 07850 978188

DE-STONERS

S6229 1997 GRIMME CS 1500 Combistar Trailed destoner with 2 large discs, large diablo, 4 full shares & 2 half shares. 7 rows of stars onto 45mm web and cross conveyer . Steering & levelling axle with 12.5 80 - 18 tyres. Good condition % Shaun 07850 978188 S7166 HOEKSTRA GLB Bed cultivator with clamp on hook tines for 2 - 34” rows plus enough spare tines for a full bedwidth Fitted Ridging hood for 2 - 34 - 36” rows. Some spares Average condition £2,250 % Shaun 07850 978188 S6694 2004 JONES Triple Bed Tiller Hydraulic Folding Single rotor Bed Tiller with 3 of 1.65m Heads. 2- 6.9- 6.00 Depth wheels. 4 Ridging bodies. Nice And Straight, Recent New clutch and yoke. Very Good condition £5,000 % Shaun 07850 978188 S6230 1997 REEKIE RT 170S Rear mounted Bedtiller later model with chain case skid, tines appx 70% plus RBM 2 Ridgers on back with duck bill points. Very Good condition £1,350 % Shaun 07850 978188 C6720 GRIMME Destoner Declodder, 1991 Mustang model 1500mm wide at discs, pto drive to twin webs first continental type 45mm in good order, front split shares with cutaway side discs & large Diablo above, steering axle with adjustable track, heavy duty scrubber web with hydraulic operation (farm addition), rear cross web for stones & clods, good tyres, not used last 2 seasons but plenty of work left in machine, will go straight to work Good condition £1,350 % Chris C 01926 338639 S6179 PEARSON Jumbo 60/80 Bed Former c\w 2 standard Pearson Bodies, with 2 trip leg subsiolers and later weighted markers. Good condition £700 % Shaun 07850 978188 S7015 1991 GRIMME Mustang Trailed destoner with 6 Piece shares, Full diablo, 45 mm Main web with Clod blocks, 30mm pitch 55 wide cross conveyer, Steering axle. Good condition £2,000 % Shaun 07850 978188 S6813 GRIMME Trailed 1800mm Web Destoner, 40mm pitch, Rear Cross conveyer and bouldedr box. Not used lately, Needs a PTO Shaft. Average condition £800 % Shaun 07850 978188 C6987 GRIMME Tornado 87 destoner/declodder, front half diablos with discs & split shares, twin continental webs, recent new front web with bearings, all usual specification, rear cross conveyor (no boulder box), small farm use dry stored Good condition £1,150 % Chris C 01926 338639

DISC HARROWS

S7094 RANSOMES HR 46 15ft Hydraulic folding discs. Sound frame with vedry well made rear drawbar. 10.5/65 -16 transport tyres. 16 - 17” front discs, 20 -21” rears. Average condition £1,500 % Shaun 07850 978188 C6861 PARMITER Utah 40-32 trailed offset 12’ wide disc harrows, pair with connecting hitch can be operated parallel behind high horsepower tractor, blue painted models with 16 front cutaway & 16 plain rear discs, front 22” diameter & rear 24” all with set scrapers, manual angle adjust, hyd operated depth/transport wheels, weight per disc 79kgs - priced as a pair Good condition £2,695 % Chris C 01926 338639 S6402 PARMITER UTAH 250 Heavy trailed 3m Disc harrows. 23” Cutaway front discs, 23 -4” cutaway rears. 15/55 - 17 transport tyres. Rear drawbar & hydraulics.Sound Good condition £3,000 % Shaun 07850 978188 S7203 1982 SIMBA 2B 5.5m Hydraulic folding Trailed offest disc harrows. 24” Cutaway Rear Discs, 22/3” cutaway discs on the front. Fitted Rear Drawbar & transort wheels Good condition £4,000 % Shaun 07850 978188 S6985 SIMBA 1 B 11ft Rigid Offet disc harrows 30 as new 24” Cutaway discs 9” apert front and rear. 10/75 - 15.3 transport wheels. Plumbing and and electrics to rear drawbar. Good condition % Shaun 07850 978188 S6695 GALLUCHIO GPAR 5.0m Folding Disc harrows , 4 depth wheels with 12.5 15 tyres. 24” discs. Hydraulic gang angle adjustment Good condition £4,500 % Shaun 07850 978188 S6860 PARMITER UTAH 12FT Rigid Offset dics harrows with 16 discs on front appx 18 - 20”, 16 rears appx 23 - 24”. Fitted Rear Drawbar, Vredestein 10/75 - 15.3 Tyres on transport wheels 6 stud axles. Good condition £1,500 % Shaun 07850 978188 S7120 RANSOMES HR 33 10ft 6” Disc harrows with transport wheels, 18 -19” plain discs. Weight trays over each gang. Good condition £450 % Shaun 07850 978188 C6754 PETTIT 77 trailed offset disc harrows, 3.6m (12’) working width with part wing fold round section for transport, manual gang angling, cutaway front discs 22” diameter, plain rear discs 2122” diameter, depth & transport wheels with hyd ram actuation (seal slight leak), rear drawbar, red paintwork, weight 74kg/disc. Same model as Dowdeswell 77’s Good condition £1,975 % Chris C 01926 338639

11

DRIERS

C6795 OPICO 525XE GT Mobile grain drier, 2003 model completely professionally refurbished in 2012 & done just 150 hours since. 12 tonne capacity pto drive fan & lpg gas fired burner, 12 volt electrical system, all good screens, augers, bearings & unloader, twin wheel model with stabiliser legs, 50 tph fold up rear loading hopper, 12” central auger with agitator arms, swivel round high top unloader (removed ready for transport. All very good paintwork & screens Excellent condition poa % Chris C 01926 338639


36 JUNE 2014 C6703 DRYING TUNNEL & Fan comprising timber tunnel to make 42’ (7 x 6’ long sections) 8’ high & 3’ wide with access & fan flange, galvanised steel ‘A’ section perforated laterals to fit to tunnel sides 3’ long quantity 148 with end sections etc (all 10” high & 11” wide at base). 15hp centrifugal 30” dia fan 3 phase electric left handed type with recent starter & wiring Good condition £1,500 % Chris C 01926 338639 S7045 FARM FANS 20TPH Double Unit On over the other c\w ASC, Gas fired on 3 phase electric. Plus Double Leg Perry 13.5m Elevator only 5 seasons old and Aspirator. Also Good Carier 14.5m 8” Elevator. Buyer removes % Shaun 07850 978188 C6494 ALLMET Drier Fans pair 15hp axial fans with silencers ex Allmet continuous flow drier used as hot & cold air supply, removed from drier Good condition Offers % Chris C 01926 338639 C6757 ALLMET Vertical grain drier Mk 4 model rated at 110 cwt per hour, 4 sections each with extractor fans, variable speed system, chain & slat conveyor moves grain through hot & cold sections, diesel fired burner. Large steel framed bucket pit elevator included. Old but all working. Suit spares etc. Good condition Offers % Chris C 01926 338639 F3430 BENTALL RS7 - 50 Grain Drying Fan. Complete with 3 phase motor and controls. Good condition poa % 07503 531889 C6707 WILDER Robomatic grain drier parts. Pair Myson extractor fans circular type 50cm dia & 1m long with axial 3 phase electric motor drive, diesel burner unit complete with hot air duct adapter fitted NuWay control with magic eye. All removed from working drier Good condition £700 % Chris C 01926 338639

12

DRILLS

S7066 STOCKS AG Micro Meter 6 Outlet Box type small seed and pellet applicator. Suitable for rape, grass seed etc. 60 litre hopper. Requires 12v power supply to operate. Hardly used c\w books and some fittings Excellent condition £950 % Shaun 07850 978188 C6916 MCCONNEL Shakaerator 3m wide linkage mounted 7 leg base unit with rear adjustable height solid coil, 24” all good legs fitted wide points & good shins. Demountable Vicon LZ 401 Supaseeder pneumatic drill hopper with hydraulic fan drive & hopper cover, twin seed tubes to each leg with coulter tube behind foot, duplex chain & belt drive to fan, rear starwheel ground drive to drill. All in very tidy order with good paintwork etc. Ideal rape establishment or bean drill Very Good condition £4,395 % Chris C 01926 338639 C6777 KRM SOLADRILL 799 Tine Drill, 6 metre linkage mounted version first used in 2008, sprung loaded tine coulters in 3 rows currently set at 15cm spacing but original tines with machine to make full 48 coulter model, front cultivation tines & rear covering tines on frame, Accord pneumatic metrering system with pto driven fan & extra large hopper, hydraulic folding wings, hydraulic bout markers, tramling x 2 either side, return to tank seed system, tractor wheel ereadicators, flotation 550/50-16 tyres, all good coulter tips, machine little used in 2012 Very Good condition £8,675 % Chris C 01926 338639 C6811 KUHN KRM drill combination consisting of Kuhn 4003D power harrow 2003 model with quick fit tines (8”) & tractor wheel eradicators, 1000 pto drive on 13/4” shaft, good side plates, clod board, rear 550mm diameters steel packer. KRM Soladrill pneumatic 4 metre grain drill 2011 model mounted above with hydraulic motor fan drive, sprung tine coulters in 3 rows at 100mm spacing, rear double following harrow, pre-emergence disc markers, RDS controller with in-cab rate adjustment on the move (requires no land wheel), large hopper includes extension (more than 500kg capacity), bout markers mounted on power harrow, tramlining. Very Good condition £12,750 % Chris C 01926 338639 S7000 STANHAY Rallye 590 12 Row cell wheel precision drill on Rigid end tow toolbar.Fitted Tungsten steel coulters, Hydraulic markers, Clod pushers & soft rubber press wheels. Set up for Sugar beet in 20” rows but will adjust. Good condition £1,500 % Shaun 07850 978188 F3542 HORSCH CO6 6m Trailed grain drill.No-till, min-till and conventional drilling. 2004. Tungsten tip coulters draw bar mounted hopper 2t capacity with hydraulicly driven filling auger. Tramline kit with pre-emergence markers & bout markers. Electronic controll box. Metering cassettes for a wide range of crops OSR Beans. Pipe work all in good order and good metal. A very well maintained high output machine ready to go straight to work. Excellent condition £12,500 % 07503 531889 S6339 2007 STOCKS AG Turbojet 8 Out let Seeder unit, Electric fan drive and radar control. Bolts onto Subsoiler or rolls etc to drill. Very Good condition % Shaun 07850 978188 S6670 STANHAY S981 12 Row Hydraulic Folding sugar beet drill. Fitted Clod pushers and soft rubber press wheels front and back Good condition £1,600 % Shaun 07850 978188 S6998 AMAZONE ED 451K G & F Maize Drill Comprising of mounted Fertiliser Drill fitted with 6 precision ED Drill units, Outer 2 units folding up for transport. Good Steel drilling coulters, wide rubber press wheels & Hydraulic markers. Rare and usefull drill Very Good condition £5,750 % Shaun 07850 978188 S6971 VICON LZ 401 Supaseeder 4m Accord Style & metering drill using Vicon Polyhopper. Good Suffolk coulters in 2 rows. 7 -12 wheels. Hydraulic centre markers.Tidy little drill Good condition £800 % Shaun 07850 978188 C6848 STANHAY Precision drill last used for sugar/fodder beet, model S981 12 row on end tow transport trailer, bout markers, 4 x rubber tyred drive wheels, ‘A’ frame hitch to main frame (requires male section) as machine is 2 x 6 row drills put together, front rubber coated wheels to seed units with steel rear press wheels, belts for sugar/fodder beet for seed placement, painted in Hestair orange. Horstine Granular boxes not used by current operator. Good condition £1,175 % Chris C 01926 338639 C6960 MASSEY FERGUSON 30 Drill 4 metre narrow spaced disc model (31 discs) with end tow transport kit, 14.9-24 tyres, hyd disc markers, wheel eradicator tines, twin tramling units, Reekie following harrow, good disc coulter grain outlet cheeks, used as grain only but complete with rear feed units, tidy machine with good paintwork Good condition £1,845 % Chris C 01926 338639

• See also the wanted section and read the buying/selling details before calling C6931 MASSEY FERGUSON 30 Grain drill 4m model with 23 disc coulters, end tow transport kit fitted, Reekie rear following harrow, good 14.9-24 tyres on silver wheels (late model on an X prefix serial number), hydraulic markers, tramlining (5+T cam), wheel eradicator tines, 5 coulter return springs each side, standard plus bridge link (for power harrow/cultivator) drawbars, feed units to both hoppers but curently used as grain only, fine seeds rollers, calibration kit & some spares, fully working drill with 12.5” diameter discs (13” when new) and all good disc cheeks Good condition £1,695 % Chris C 01926 338639 C6963 KVERNELAND T-S 4 metre tine drill, linkage mounted model hydraulic folding with rubber tyred depth wheels, pto drive to Accord pneumatic seed distibution system, tramlining, wheel eradicator tines, hydraulic operated bout markers, Z type following harrow, pre-emergence markers, in-cab control box, road lights, hopper extension with cover, leaf spring cultivator/tine coulters, quick hitch bar coupler Very Good condition poa % Chris C 01926 338639 S6941 1995 FIONA Appollo DR 3m Drill for power harrow fitment. Comes with 25 hydraulic lifting suffolk coulters in 2 rows. Access platform and following harrow. Easy to calibrate, Bracket suits Kuhn 303 harrow. Good condition £1,900 % Shaun 07850 978188 S7002 STANHAY Mk 2 6 Row precision drill with flat steel press wheels, 8 & 7” Belts for sugar beet, 5 kale belts & and Sweed belt for cover drilling. Good condition £600 % Shaun 07850 978188 S6747 2000 SIMBA 4M Freeflow Hyd Folding Drill, Doubler coil heavy pigtail tine coulters with new points. 2 rows of Forklift tyres, Following harrow & marker. Opt JD pump £1250 Very Good condition £7,500 % Shaun 07850 978188 S6802 STANHAY Mk 1 6 Row precision drill c\w Flat steel press wheels ,front and rear, Belts for sugar beet. Seeding monitors Good condition % Shaun 07850 978188 C7010 ACCORD Rear following harrow, all complete to fit 4 metre drill, adjustable mounting brackets, folding wings, Z type tines all part worn Good condition £185 % Chris C 01926 338639 S6646 WEBB 8 Row Precision drill, end gearbox model c\w cell wheels for sugar beet. Flat steel front press wheels and flat rubber rears. Tidy for age Good condition % Shaun 07850 978188 S6909 AMAZONE 3m Combination Comprising of KG302 Heavy 1000 rpm Duty Power harrow with new blades and tyred packer. Fitted with RPAD 302 Drillstar with Suffolk coulters in 2 rows , Hydraulic markers and access step, Hydraulic following harrows and road lights. Good condition £3,950 % Shaun 07850 978188 C6563 MASSEY FERGUSON 500 trailed grain drill, 4 metre model with 23 disc coulters (7” spacing) new in 1992, 14.9-24 tyres, hydraulic disc markers, twin eradicator tines, single tramlining units, rear Norton fixed section following harrows with mini pigtail tines all fold for transport, drill put away oiled up & discs all good at 12” diameter. Quantity of spares. Please note - this drill does not have an end tow transport kit or drill transport trailer (Reekie transport trailer available at extra cost not at same farm) Very Good condition £1,795 % Chris C 01926 338639 S6812 VICON 6m Supaseeder Suffolk coulter Air Seeder c\w Following harrow, hydraulic markers and End tow kit using 11.5/80 - 15.3 tyres Good condition % Shaun 07850 978188 S6723 MATCO Moncentra SP 6 Row Precision drill with cell wheels for Sugar Beet, Done very little work Good condition £800 % Shaun 07850 978188 S7125 MF 500 4M Grain only Disc coulter drill c\w Bridge link and End tow kit. Good discs and tubes (5” spacing) Following harrow & step, Hyd markers, erradicators & pre emergence markers. 70% 14.9/13 - 24 tyres. Very Good condition £1,500 % Shaun 07850 978188 S6122 1996 VICON LZ505 3m Suffolk coulter Combination drill, Pneumatic seeding, PTO fan, Following harrow, Pre emergence markers, Hydraulic markers & stands. Mounted on Kuhn 300 power harrow with HD 3 speed gearbox, Good PTO £1,750 % Shaun 07850 978188 C6822 KRM Soladrill R Ti model for mounting on ‘A’ frame (make drill/power harrow combi), 4 metre wide with suffolk coulters in 3 rows, hydraulic fan drive to air seeder unit, tramlining, disc markers, pre emerge marker, rear harrow, star wheel type land wheels either side, de-mount stands. New in 1997 may need some parts to put back to work or for spares, ideal to use on cultivator for bean drill Good condition £925 % Chris C 01926 338639 S7162 AMAZONE D8 -40 Superdrill 4M Mounted drill for Power harrow or tractor mounting. Suffolk coulters in 2 rows, Long Hyraulic markers, Large Access platform, Following harrow. 260/70 - 15.3 depth wheels on ends. Very Good condition % Shaun 07850 978188 S6810 CONCEPT 4M Combination Aerodrill 1000 with Suffolk coulters in 3 rows, Hydraulic markersand following harrow mounted on Concept power harrow wth packer roller Average condition £1,600 % Shaun 07850 978188 S6944 2000 SIMBA Horsch C04 Trailed hydraulic folding tined drill with duet couters, disc coverers, Linkage sited fan, tyre packers, Following harrow, Disc pre emergence markers and road lights. Very tidy drilldone low acreage Excellent condition £7,500 % Shaun 07850 978188 S6678 2012 KRM PS 120 M1 Small Seeder unit with up to 8 Outlets for subsoiler etc, 2 spare sets of fine seed metering wheels, Electric fan, uses Sensor (wheel mountable)to meter rate. Digital in cab read out.Inc spare pipe and 5 distrubution tubes. Fitted but Never used New condition £2,375 % Shaun 07850 978188 S6893 ACCORD DL 4m Mounted pneumatic suffolk coulter drill c\w tramlining, access step, Hopper extension & cover. Tidy for age Good condition £700 % Shaun 07850 978188 C6993 VADERSTAD

Rapid 6 metre trailed 600P model grain drill, new in 1996 but converted to Agrilla tine system & refurbed with all new discs a few seasons ago. Front twin track eradica-

tor tines followed by 2 rows Agrilla spring tines, 2 rows Crossboards & genuine Vaderstad notched drilling discs all 380mm diameter, rear pigtail following harrow, twin disc pre-emerge markers, later type disc bout markers. All good multi rib tyres, hydraulic fan drive & star type metering wheel. New barrels fitted to pair of hopper mounted metering system in 2013, twin shut-off tramling units per side, yellow hopper cover, all good disc seed delivery boots, instruction book & comes complete with full set rigid tines Very Good condition £12,995 % Chris C 01926 338639 C6996 TINE Bean Drill 4m wide linkage mounted Kongskilde Vibroflex cultivator with Vicon LZ 401 pneumatic grain drill hopper mounted above, feed tubes supply 17 heavy duty tines in 3 rows, terra tyres for depth control & seed metering, hydraulic bout markers, pto drive to fan, coulter boots behind each tine share, manual folding wings with 2 tines each Good condition £2,225 % Chris C 01926 338639

13

ELEVATORS & CONVEYORS

S6816 LANICHBURY Double leg 9” Belt and bucket elevator with 4.2 kw 3 phase motor. Appx 27ft long. Also 32ft Single leg elevator. Good condition % Shaun 07850 978188 S7168 FYSON FE 85 27ft belted elevator C\w 8ft extensionsuitable for corn or potatoes. 2 hand operated lift rams. 2 small whhesl, lift bar & small hopper. Single phase 240v Average condition £1,200 % Shaun 07850 978188 S7030 FYSON FE 85 Standard 27FT Elevator with 18” Rubber belt, 2 spped drive via changeable belts. 3 Phase motor. Average condition £400 % Shaun 07850 978188 C6655 SKANDIA Belt & Bucket Elevators - 60tph model SE140/40 with 2.6kw 3 phase elec motor drive, 140mm wide buckets, outlet height 5.4 metres. SE140/40 belt & bucket model (40tph) with outlet height of 6.5m & 2.5kw motor drive. Also Carier 65tph belt & bucket elevator with 10” wide buckets, 5m outlet height, 4kw 3phase elec motor drive. All modern steel casing type done little work Very Good condition poa % Chris C 01926 338639 C6906 CARIER Belt & Bucket vertical grain elevator, single leg box section all steel 10” x 7”, 1.5kw elec 3 phase motor & gearbox drive, good base section, approx height 22-23’ all taken down in sections, good belt with steel 8” buckets spaced at 5” apart Good condition £795 % Chris C 01926 338639 S7145 8” Conveyer 2 sections of 8” conveyer, only a length of chain and paddle flight % Shaun 07850 978188 S6602 Top Conveyer 36FT Long 8” conveyer with 7.5” HD chain, 3 links between raddles (11” centres)3 phase motor & Fenner 20 :1 gearbox Good condition £800 % Shaun 07850 978188 C6654 SKANDIA Grain Conveyors, Model KTB40.98 used as a top conveyor 40tph capacity 20m (60’) long, 3 phase electric motor drive, twin outlets, includes inclined section to follow roof profile & maximise drop height. Scandia bottom conveyor with inclined section to outlet at 1m above ground, 40tph with 2.2kw 3 phase motor 9 metres long, new plastic flights fitted on chain Very Good condition poa % Chris C 01926 338639 S6974 40FT Belt & Bucket Elevator using Very good 13” belt with 12” Buckets, Dismantled inc 6 sectionsof 10ft 15” By 10” internally. 1 8ft & 1- 5ft . Good Head with Fenner TD6 24.5 :1 Gearbox, No Motor but pulleys inc. Average Base needs a plate Good condition £1,250 % Shaun 07850 978188 S6919 FYSON FE 85 Elevator 27ft Elevator with good 500mm belt, 3 speed SINGLE Phase Drive ! Front Jockey wheels and potato hopper. Hydraulic up and down Very Good condition £1,900 % Shaun 07850 978188 S6604 9 “ Single leg Elevator, 9” Buckets on 10” Belt 11” by 6” casing. 3 phase motor & drive. Appx 20ft long. Removed ready to go Good condition % Shaun 07850 978188 S6885 GAMART ENGINEERING 6m Flat Belt Conveyer with 60 cms belt on 4 legs with caster wheels. 3 phase side drive. Used one season only Very Good condition £2,000 % Shaun 07850 978188 C7007 WYTRAC Elevator fitted 500mm wide cleated rubber belt, 25’ long on wheels (similar to Fyson), single phase electric motor drive, winch wire height adjust system, sound belt but small centre cleats missing, timber side extensions, can be used for small bales etc. Average condition £395 % Chris C 01926 338639 S6726 HERBERT Industrial Elevator 9m Plus 2m Head. 750mm main belt. Hydraulic raise & lower, plus head separately up and down. Good condition £5,750 % Shaun 07850 978188 S7088 FARMERS FRIEND Angleveyer Appx 20m Long capable of moving grain up 45degrees at appx 20 tph Good condition % Shaun 07850 978188 S7215 Flat Belt Conveyers 2 - 20FT Flat belt conveyers appx 15” wide on steel frames c\w 3 phase motors. Average condition % Shaun 07850 978188 C6909 JOHNSON Rubber Belt elevator used in small potato store, single phase elec motor drive, steel 7’9” wide receiving hopper, 50mm cleated belt, primary fixed angle section 9’ long, second 10’ section with hand pump hyd raise/lower system, concrete stabiliser block in base frame, rubber wheels make it easy to move, old but good working order could suit other crops Good condition £945 % Chris C 01926 338639 S6603 CARIER 6” Top Conveyer Late type with Sprung tensioners. 5.25” by 7.75” Internal casing. Raddles at 9” centres ( 3 link spacing. c\w 3 phase, motor Very Good condition £1,000 % Shaun 07850 978188 S6973 10” Raddle Chain Conveyer Appx 56 Ft Complete with Reduction Gearbox, 3 phase motor & chain plus 34ft of Casing only. Dismantled in 10ft, 5ft, 6ft & 8ft sections. Heavy duty slow running conveyer, gearbox driven by duplex chain from motor. Good condition £1,250 % Shaun 07850 978188 S6725 HIGH CAPACITY 12M Powered Commecial elevator, 600mm belt, Small Spreader hopper at feed end with a ccess pltform roud it. Splits and folds back to transport. Hydraulic up and down plus powered slewing and feeding wheels. Good condition % Shaun 07850 978188 S6987 RAMSEY ENGINEERING 34 Ft Elevator Mobile 600mm Rubber belt type. 3phase top drive, Powered wheels swivel to slew automatically using sensors and poles. Hydraulic down and up to 16ft. Well specced machine with small circular fill hopper. Good condition £3,000 % Shaun 07850 978188

S6607 ANGLEVEYER Grain conveyer Choice of 8 or 5m. Casings 280 mm by 125mm 3 or 4 Kw 3 phase motors took out ready to go. Usefull conveyer Good condition £800 each % Shaun 07850 978188 S7165 B AND W HANDLERS 12.9 M Heavy Duty Elevator, 12.9m Long with very high lift via powered rams All 3 phase electro hydraulic. Inc Powered drive wheel and power slew. Good 600mm cleated belt. As new 7.50 - 10 transport wheels. Plus castor wheels at back and sides to stabalise. Folds to 8.7m for transport. Recently refurbished and painted etc. Very Good condition £3,000 % Shaun 07850 978188 F3266 FYSONS Rubber Belt 25 foot conveyor with chevron belt. 6 foot extention with manual slew. 3 phase motors, hand operated hydraulic pump and twin rams for lift, full width and narrow hoppers, towing eye. Good condition poa % 07503 531889 S7102 MOTALA MC 2000 500 kg Platform Lift. Int 1.1 by 1.4m, exteranlly 1.3 by 1.7m Raises appx 3.5m. 3 phase as new % Shaun 07850 978188 S7212 ANGUS Powerflight M100 Cable and polydisc Elevating conveyer on Carriage with 6 castor wheels. 90mm nylon discs inside 100mm tube. Appx 20ft long. 3 kw 3 phase motor Average condition % Shaun 07850 978188

14

FANS

S6683 REKORD Fan RH Inlet Model OF 2 c\w 7.5Kw motor. 15” wide 30” diameter. 15” by 20” outlet. Mounted adjustable frame. Very Good condition % Shaun 07850 978188 C6662 REKORD Centrifugal 15hp free standing drying fan, model LCL60 3 phase, 30” diameter fan left handed type with 18” x 24” square outlet, older blue painted type not used recently Average condition £345 % Chris C 01926 338639 S6262 TYPHOON HE 30 PTO driven fan, 6ft Diameter by 2ft. RH Inlet. Shaft out with 2 pillar block bearings. Good condition £400 % Shaun 07850 978188 S5767 Fans 30” By 24” Centrifugal type c\w 3ph 2.2 kw motors. Also some smaller 1.1kw fans Very Good condition POA % Shaun 07850 978188 C6806 TYPHOON Centrifugal 25hp 3 phase electric drying fan, free standing right handed type used with outdoor grain silos, red painted model with switchgear & Tryac controller for use with modulating burner. Can have paired galvanised steel fan ducting to supply silo if required Good condition £475 % Chris C 01926 338639 S6717 REKORD 20,000 CFM LH Inlet Corn drying fan. 36” Diameter 2ft across. Originally had 30hp electric motor drive to drive now fitted with Gearbox belt driven to drive with PTO. Also4ft diameter Axial flow fan for sale. Good condition £400 % Shaun 07850 978188 S5822 REKORD RS 15 LH Inlet, 3 Phase, Appx 4ft Dia, 2ft across. C\w star delta starter etc Good condition £400 % Shaun 07850 978188

15

FEED & FORAGE BOXES

S6144 TEAGLE Tommahawk 5000 3Pt Linkage monuted Bale Shredder, Spreader. Round bale drum machine with spread left or right. Average condition £1,000 % Shaun 07850 978188 S6910 TAARUP 852 3 point linkage mounted Bale chopper/ spreader. Self loads Round or big/med square bales vai hydraulic back door. Top RH hydraulically swivelling top spout with electric angling chute to throw chopped straw into pens. Very Good condition £4,500 % Shaun 07850 978188 S6385 1993 JOSKIN Feeder Box. Mounted Self filling silage feeder. Chops before feeding on the RH. Unload only to the left. Used once only Very Good condition £1,750 % Shaun 07850 978188 S6867 2006 KEENAN Klassik 140 Diet Feeder, Std Height LH Discharge with 2ft chute, rear ladder, STAD 04 Weighcell system. Small set blades to chop potatoes and Slabs of straw. Very Good condition £8,000 % Shaun 07850 978188

16

FERTILISER SPREADERS

S6832 AMAZONE ZAU 1501 Twin disc spreader c\w 12m & headland discs, plus hopper grids. Sound spreader well looked after. Good condition £700 % Shaun 07850 978188 C6976 AMAZONE Taskers linkage mounted twin disc fert spreader, model ZAF 803 with hydraulic shut off, steel hopper holds 1.5 ton, orange paintwork, sound machine stored dry unused recently suit small tractor. Average condition £345 % Chris C 01926 338639 S7003 AMAZONE ZAM Twin Disc mounted spreader. C\w 24m Discs in tidy order Good condition £900 % Shaun 07850 978188 C6950 LELY Centreliner 1500 twin disc mounted fertiliser spreader, hydraulic shutoff, all good 1500 litre capacity steel hopper with cover, older model machine spreads up to 12m but kept dry stored in working order Good condition £495 % Chris C 01926 338639 C6948 AMAZONE ZAF 1203 linkage mounted fertiliser spreader, twin disc spreads up to 12 metres, 600kg capacity steel hopper, hydraulic shut off to each disc (discs can operate independently), big bag cutter facility, tidy small machine in gwo Good condition £475 % Chris C 01926 338639 S6769 VICON Rotoflex RS XL 2 Disc Mounted Fert spreader Do 24M c\w Cover grids & road lights Good condition £1,500 % Shaun 07850 978188 S6684 1999 KUHN Axera H Spreader parts 99 - 02 As follows : Setting Mechanism X2 LH R4072056 RH R4072058. Disk Positioning X2 LH R4072056 RH R4072026. Mud flaps. Electric Rate Meters X2 R2044718. Agitator R4072078. Sensors (Speed) X3 R2009440. Motor Console X1 R3072018. Motor X1 072050. Valve Block R4072074. Cylinder R4072041. Axera Box R2053163. White Box and Wiring R4072083.Grill- Middle. Grill- Side X2. Hyd Hose and wiring Very Good condition £700 % Shaun 07850 978188 C6696 NODET DPS12 Parts only for fertiliser/small seeds/granular application, all from used machine including fan with gearbox, metering rollers & small seeds kit (note no hopper or other items) Good condition Offers % Chris C 01926 338639 S5958 KRM EX 1600s Spinning disc fertiliser spreader c\w hydraulic shut off & hopper grids . Straight & tidy Good condition £1,200 % Shaun 07850 978188

WWW.WRIGHTSREGISTER.COM

S6401 1996 KUHN MDS 1121 Twin Disc mounted Fert spreader c\w Hydraulic shut off and manual adjustment. Fitted timber hopper extension. OK 24M Good condition £1,000 % Shaun 07850 978188 C6988 LELY Centreliner SX 6000 Centronic twin disc mounted fertiliser spreader, Centermatic twin weigh cell system operates with machines own built in Radar unit for on the move application variable rates linked to forward speed. Stainless discs & vanes with stainless metering units currently set at 24m (can spread from 9 to 36m via gearbox sprocket changes), 3000 litre hopper capacity, folding hopper cover, headland tilt ram, road lights. Radar unit has been added recently & only requires 12 volt lead to operate machine on any tractor Very Good condition £2,795 % Chris C 01926 338639 S6611 FRAZIER Mounting frame To place Fertiliser spreader on back of Agribuggy c\w 2 hydraulic rams Good condition % Shaun 07850 978188 S6707 2006 AMAZONE ZAM 1200 Twin disc mounted spreader with SB, S, Hopper cover, grids and road lights. Comes with 3 sets of discs inc 12, 24 & OM24-36. Only used for seed. Very Good condition £3,000 % Shaun 07850 978188 C6956 RECO Sulky DPX 1504 twin disc fertiliser spreader, 1500 litre steel hopper with folding cover, stainless spreading discs can operate at 12 to 24 metres, hydraulic on/off, internal hopper grids, good tight disc driveline, has been repaired on chassis arms but fully operational. Also Kuhn Comete ZSA twin disc spreader with hydraulic on/off control, extended steel hopper holds 1200kg, cat 1 & 2 linkage so suit small tractor, good pto, in sound order for its age priced at £350 Good condition £475 % Chris C 01926 338639 C6823 FRONT TANK System for liquid fertiliser (similar to Opico Nitrojet), consisting of front linkage mounted Knight 800 litre tank with Ford tractor weights in base for added stability, hydraulic motor driven 2 cylinder diaphragm pump with big filter & electric variable rate controller with in-cab RDS Spraymaster 200 unit, can operate at 100 litres/hectare using pressure based system, long delivery pipe to rear implement with couplings, all put together in last 2 years (new pump etc.). Could also be used with potato planter etc. Complete with single axle MF trailer chassis & pair plastic tanks mounted above, total capacity approx 3000 litres to act as bowser, hydraulic driven delivery/suction pump, pipework for both tanks etc. Rear steel lockable container for chemical cans or similar, can also be used as water bowser. May split Very Good condition £5,950 % Chris C 01926 338639 S7025 AMAZONE ZA - M Twin Disc fertilser spreader Extension to 2000 litres. 12 - 24m discs. Hopper grids. Twin hydarulic shut offs siamesed into one pipe with taps. Good condition £650 % Shaun 07850 978188 S6890 GAMBERINI Trailed Salt Single disc spreader. Suit quad bike or compact. Wheel driven. Good condition £400 % Shaun 07850 978188 S7058 STOCKS Bateman Twin Set Fan jets mounted on special frame to fit on front of Bateman RB 35 or similar sprayer. 24 36m total bread. Very Good condition £1,250 % Shaun 07850 978188

17

FORKLIFTS & HANDLERS

F3457 1970 NU WAY BENSON McConnel Tail Slave TS 20 Rear mounted forklift. 1t capacity on forks. Fits onto tractor mounted sub frame Average condition poa % 07503 531889 F3432 HYSTER SpaceSaver 70 Yard Forklift truck. 3t, free lift, mast to approx 20’. 6 cylinder gas engine. 2 speed manual transmission with clutch. Solid wheels Starts on the button. Mast chains, bearings and hydraulics in good condition. No oil leaks. Good condition poa % 07503 531889 S6737 SANDERSON Fork Truck Bucket PM 35 for Sanderson rough Terrain & industrials with Quick Release Carriage and Double rams (Drilled to accept teeth and use as soil bucket.) 6ft wide. Good condition £675 o.n.o. % Shaun 07850 978188 C6941 MATBRO TR200 Telescopic Handler, 1996 model with Perkins 4 cylinder Phaser engine & torque converter transmission, 9680 rec hours, pivot steer type with Clarkworth axles, Goodyear 16/70-20 tyres approx 20% good tread, joystick loader control lifts 2.4 tonnes, rear pick-up hitch, front hyd service, all straight panel work/cab & fenders with some slight damage on plastic items. All fully working machine with good paintwork on smallholding Good condition £7,650 % Chris C 01926 338639 C7002 PIVOT STEER 4x4 Omfort 1 tonne capacity forklift truck, compact machine fitted with Peugeot 4 cylinder diesel engine, hydro transmission, 10.00/75-16 all good treaded tyres, Roll bar & demount cab, 1988 model with pallet tines & Merlo adaptor plate with dirt bucket & front hyd service, weight 2000kgs & machine is 1.3m wide, unused for a while will need steering pivot bushes but all complete Good condition £1,750 % Chris C 01926 338639 S6947 1997 LANSING LINDE H30 D 3 Ton Industrial forklift with 4.5m lift. 3 cylinder Perkins diesel engine. 2.50/75-12 Solid rubber drive wheels. ROPS frame with Glass front and rear. Autostop powershift. Well maintained Good condition POA % Shaun 07850 978188 S7077 SANDERSON SB50 TC 2wd Rough Terrain Forklift, Torque converter transmision, 4.5m Triplex mast. Full cab c\w glazing. 16.9 - 28’s 30 %, 11- 16 rears 70%. 3 Spools and tech reel. Good condition £3,250 % Shaun 07850 978188 C6958 SANDERSON Teleporter 2 4wd/4ws telescopic loader, 1985 model with Ford engine lifts 2250 kgs, lever controls in cab, torque transmission, rear pickup hitch, pallet tines with front service, 405/70-20 tyres all 70% good tread, recent front king pins & brakes refurb. Electric fuel lift pump & heavy duty battery leads, good straight panel work & all cab glass with good mast slides, 7017 rec hours on clock Good condition £6,950 % Chris C 01926 338639 F3535 1985 SANDERSON SB50 TC 2wd forklift. Triplex free-lift 4.5m lift mast. Ford 3 cyl. Engine, 6950 recorded hours. Torque converter transmission, 4 spools, 16.9/1428 tyres, 50%. Starts on the button. Grain bucket and pallet tines £3,500 % 07503 531889 S6946 1995 LANSING LINDE H40D 4 ton lift Industrial forklift, 2 stage 3.66m mast with sideshift. Perkins 4 cylinder diesel engine (7600 hrs). ROPS frame with front & rear glass.2.50 - 15 solid rubber tyres Good condition £7,000 % Shaun 07850 978188

C6872 BUCKET Brush Agriquip model 2m wide new in 2004, hydraulic motor & chain drive to very good 22” diameter nylon brush, brackets & height adjusters with demount stands, all in red paintwork Good condition £895 % Chris C 01926 338639 S6913 MANITOU MB25P Rough Terrain fork lift with 5.4m triplex mast fitted with Strimech hydraulic tipping backplate. 70% 15.5/80 -24 Drive tyres, 50% 10.5/80 - 18 rears. 5600 hours, good cab with all glass in . Good condition £2,250 % Shaun 07850 978188

18

GRAIN EQUIPMENT

S7087 MICHAEL WILLIAMS Streamline Dust Extraction system. Fitted 10HP 3 phase fan, 3 x 18” Diameter dust extraction socks. Various ducts for buyer to remove. (unit already out) Good condition % Shaun 07850 978188 S7016 Plywood 8ft by 4Ft Grain walling sections made from 10mm ply with 100mm timber frames. Dismantled ready to move. Good condition £50 each % Shaun 07850 978188 S7213 MILD STEEL Hopper Appx 10ft 6” By 6 ft 6” . C\w Large Auger in bottom to discharge Hoppder appx 5ft deep plus 4ft extension sides,all in good steel frame Good condition % Shaun 07850 978188 S6817 LAINCHBURY D25/ 10 Seed Dresser Timber framed, appx 5ft by 8ft by 8ft tall. A few screens, 3 phase. Very Good condition £350 % Shaun 07850 978188 S7179 PLYWOOD Grain Walling Panels, L shaped, 8ft by 8ft by 4ft deep with angle iron reinforcement % Shaun 07850 978188 C6657 SKANDIA & BRICE BAKER handling equipment ex grain store/drier. Skandia mechanical intake pit with drive over grid (size 2.5 x 0.9m), model KTG60-96 fitted 2.2kw 3 phase elec motor drive, capacity 60tph with total length of 8.4m & delivers at 2m above ground. Brice Baker ‘U’ trough auger, 6” flights with reversible flow (either direction), 8m long with 4 outlets, 3 phase elec motor & switchgear. Brice Baker GP straight auger 20’ long with 6” flights & 3 phase motor plus intake hopper. All taken out ready to transport Very Good condition poa % Chris C 01926 338639 S6901 LUNDAIN Portable Grain Stirrer 3 phase model with 3” Auger appx 5ft long. Handle bar type manually operated. Very Good condition £2,000 % Shaun 07850 978188 F3443 KONGSKILDE TRl 150 Grain Sucker/Blower. 11kw 3 phase motor. Directdrive. On trolley complete with CAD 20 rotory valve. 160mm diameter pipe 15t/hr @ 40m and 9t/hr @ 80m. Average condition poa % 07503 531889 S6681 GALVANISED Ducts 121 6ft Galvanised steel grain laterals appx 15” tall by 16 wide at base 3” across the top. Plus 26 same 3ft long, some end caps. Very Good condition £6 each % Shaun 07850 978188 S7007 HANSEATA Hamburg 48 Gravity Table Seperator, timber framework,3 PH electric with Large Overcentre pulley to run at 105 RPM. Multi outlet. Overall size 12ft by 5ft. Average condition £800 % Shaun 07850 978188 F3467 ALMACO SPT Thresher Small Bundle Thresher suitable for threshing small quantities of seeds or grains. Was used by a seed development company. Has a 3hp Briggs & Stratton engine and a peg threshing drum, mounted on wheeled frame and easy to move. Still availabe through Nickersons. Average condition poa % 07503 531889 S7210 SIMPLEX 18ft Diameter Out door Drying bins 12ft 6” to the eaves, c\w side and roof doors, Access ladders, Drying floors and one Sweep auger. Also 2 - 15ft Diameter 15ft tall round bins installed inside without roofs to be dismantled Good condition % Shaun 07850 978188 S7040 GALVANISED 10” Grain laterals Perforated sides Suitable for tunnel fitment. Both 3 Ft & 4 Ft Lengths. Appx 500 available Good condition % Shaun 07850 978188 S7201 Grain Tunnel Appx 69ft long in 24 sections (Ea 3ft) 6ft tall plus 2ft ext by 3ft int. spigots for grain laterals. Good condition % Shaun 07850 978188 S5192 BOSWELLS OF BLAIRGOWRIE 2 Screen Dresser 20TPH Pre cleaning dresser, 2 screen shoes with varous alternative screens. Mounted on platform in air. 7ft by 5ft6” by 6ft Tall. Plus extraction duct out. Good condition % Shaun 07850 978188 S6279 TYPHOON LH Inlet Downdraft 15 HP fan suitable for mounting on top of grain tunnel outlet at 45 degrees. Good condition £400 % Shaun 07850 978188 C6949 KONGSKILDE TRL 15 grain transport blower, 3 phase electric 11kw (15hp) motor drive, hopper feed to cell wheel, 8 x galvanised 6” dia OK piping in 2m lengths, 3 x 1m lengths & 4 bends Average condition £325 % Chris C 01926 338639 S7216 LAW DENNIS D100 Corn Dresser, all Steel on stand, 3 phase Average condition Offers % Shaun 07850 978188

19

GRASSLAND EQUIPMENT

S5984 2001 KRONE AMT323CV Tariled 3.2m Mower condtioner with steel flails.1000 rpm pto. Tidy Green paintwork Average condition £1,750 % Shaun 07850 978188 S7226 MAJOR 605 Mounted 6ft Topper for small tractor. Single rotor with skids. Very Good condition £1,000 % Shaun 07850 978188 C6939 CHAIN HARROWS Tractor mounted 12’ wide with 2’ manual folding wings, chains from headstock to rear frame allow ground following, one complete mat 7’ deep in box section frame with all very good single sided grass harrow tines, red paintwork, done little work in straight order Very Good condition £650 % Chris C 01926 338639 C6770 KUHN FC313FF linkage mounted centre pivot mower conditioner, 2 seasons work only approx 400 acres/year, 3.1m (10ft) cutting width with 6 disc bed, rear nylon ‘V’ shaped conditioner tines with all adjustable swath deflectors, full protection skirts all very good condition, twin pressure gauge headstock unit for ground following ‘lift control’ floating cutting bed system, fold up demount stand, all very good paintwork. Retirement sale - rare opportunity for excellent quality mocon Very Good condition £8,350 % Chris C 01926 338639 S7037 WESSEX 9FT 3 Bladed Topping Mower, c/w depth skids & End tow kit with 2 wheels Good condition £975 % Shaun 07850 978188


S6889 TAARUP 337 Trailed mower with double yoke headstock drawbar, 10/80 -12 travelling tyres. Had conditioner originally but no longer fitted Good condition £1,500 % Shaun 07850 978188 S6386 JOSKIN EB360 R3 Mounted folding grassland harrow. 3.6m Working width folds to 2.4m. Levells molehills dung etc.Cat 2 linkage Very Good condition £1,600 % Shaun 07850 978188 S6352 1990 MACDON 3000 Trailed 7.5m wide Cutterbar Swather, knife cutterbar lays onto canvasses then out through centra swath 1.3m wide. End tows for transport. Rare tool Good condition £5,000 % Shaun 07850 978188 C6758 OPICO Bush Hog Flex-wing model 2615 heavy duty 15’ rotary topper, all gearbox & shaft drives to 3 section hydraulic folding ‘batwing’ system, swinging chain deflectors to steel decks, free swinging twin cutting blades on central dishes, solid rubber tyres on rear x 6. Wide angle pto drive. Requires some small jobs before work Average condition £2,250 % Chris C 01926 338639 C6961 MCCONNEL PT9 Grass Topper, linkage mounted 2.7m (9’) wide with pto drive to gearbox & belt drives, twin cutting blades with swinging end flails, adjustable height side skids, webbing straps to hitch A frame allow machine to follow ground contours, 2009 model with all good yellow paintwork been used for grass airstrip maintenance only on arable farm Very Good condition poa % Chris C 01926 338639 S4847 2006 ECKO 400 ES High Performance strimmer c\w auto nylon cord head. Cracking tool. Less than half new price Very Good condition £120 % Shaun 07850 978188 C7018 BOMFORD

Flex Wing Cutlass 460 trailed topper, 15’ model with centre section & 2 x hydraulic fold wings all shaft & gearbox drives with slip clutch protection, central cutting dish with 3 swinging heavy duty blades on each section, debris chains front & rear blades, adjustable cutting height from 25 to 375mm can follow undulating ground, 1000 pto drive, 6 x 200/60-14.5 tyres at rear, road lights, 2006 model owned from new in bright yellow paintwork, all straight & tidy had little use & not worked last two seasons all dry stored Very Good condition £7,250 % Chris C 01926 338639 C7019 BULLDOG Reel Mower trailed triple gang with tractor pto drive, made by SABO Roberine (Dutch) with 2 front & 1 rear 30” wide cylinders, 5 bladed type with rollers, gearbox & belt drives, rubber tyred wheels, manual fold for transport, recent refurb of cutting cylinders etc. Toolbox & screw jack, all in working order Good condition £895 % Chris C 01926 338639 C6944 TWOSE Buckrakes Flatback pushoff type suit tractor linkage or loaders, 12 tine 7’ 6” wide with twin ram operation &10 tine 6’6” wide single ram model, both have short side tine facility but no tines fitted.Yellow paintwork & hydraulic hoses stored undercover & only done non farm work at exhibitions (10 tine priced at £565) Choice of one 12 tine (which requires box section tine holder base plate renewing) & two 10 tine models Good condition £695 % Chris C 01926 338639 C6771 VICON Andex 783 trailed twin rotor rake, Terralink Quattro model fully adjustable with hyd rams from 7.0m to 7.9m working width (operates easily with 3 x3m swaths), single backbone frame with hyd folding wings carrying tined rotors with 4 pneumatic tyres per side, lower link hitch attach to tractor allows rear machine wheel steering on connecting linkage. Purchased as ex demo machine in 2012 & done 2 seasons on small farm. All in full & complete working order with centre rubber curtain partly missing. Very Good condition £9,995 % Chris C 01926 338639 C6704 KUHN Flail Topper model VKM 240 fiited rear roller & hydraulic slew ram to offset machine, linkage mointed 2.4m (8’) wide with 540 pto drive, front steel stone deflectors & rear rubber curtain, horizontal rotor fitted wide section swinging flail heads, tidy paintwork & all in working order Good condition £2,850 % Chris C 01926 338639 C6697 KUHNFLEX 4 Rotor hay & grass tedder, tractor linkage mounted with rubber skirted vertical drums fitted steel tines, model KE4 requires pto shaft & swath deflector arm. Suitable for spares or repair Average condition £475 % Chris C 01926 338639 C6967 NEW HOLLAND 435 disc mower, tractor linkage mounted 5’6” cut with swathboard & grass deflector, good pto drive, built in screw adjustable top link, manual screw handle raise & lower mechanism, belt drive to all good cutterbar discs & end ‘top hat’, red plastic top cover on steel frame. Suit small tractor, old but tidy working order & parts still available. Good condition £465 % Chris C 01926 338639 C6878 LSM M9 Grass Topper, tractor linkage mounted pto drive with 3 cutting rotors, 9’ operating width on adjustable side skids, gearbox & vee belt drives, large swinging blades on centre rotor shafts, flexi strap to top of ‘A’ frame allows machine to float, all fully guarded with green & black paintwork done little work Good condition £985 % Chris C 01926 338639 S6388 JOSKIN D280 CZ Pasture Topper ,2.8m Breed, Mounted Cat 2 Machine, PTO driven. Skid height controlled Good condition £1,250 % Shaun 07850 978188 S6664 2009 OPICO 3m Sward Lifter Fitted 3 subsoiling legs with Discs and individual guttler 4 ring press modules on each leg. 2 spare sets of feet. Usefull bit of grassland kit hardly used Excellent condition £4,700 % Shaun 07850 978188 C6938 VOTEX Grassland Topper 6 foot version with twin horizontal cutting blades, tractor linkage mounted, adjustable side skids, good pto, old but sound Average condition £350 % Chris C 01926 338639 S6523 BEAVER Trailed Gang Mower set of 5 gang mowers each 30”, hydraulically driven & folding. Good Standard heads, Cut appx 16ft. £3,800 % Shaun 07850 978188 C6937 QUANTOCK Grass Harrow 4 metre hydraulic folding version with 6 rows 8mm thick spring tines, new in 2009 & done little work all in very straight order, front pneumatic tyres on adjustable height wheels, twin ram operation. Ideal for moss extraction & grass aeration. Current new price £4700 Very Good condition £2,395 % Chris C 01926 338639

JUNE 2014 37

• See also the wanted section and read the buying/selling details before calling

WWW.WRIGHTSREGISTER.COM

C6946 CARIER RL30 Weedwiper, 3m linkage mounted model with 6” diameter roller fed by full length felt impregnated dispenser, plastic chemical container & all mixing equipment, 12 volt pump, machine fitted on additional toolbar with wheels to assist good ground following Good condition £800 % Chris C 01926 338639

20

HEDGECUTTERS

S6387 BOMFORD 81 - 81 Barcket mounted swing round (LH > RH) 8m Hedger. In Cab electric multi joystick controls. 1.4m head. 540 PTO. In use recently. Good condition £3,800 % Shaun 07850 978188 S6936 2010 MC CONNEL PA 47 LH reach 3 pointed linkage mounted hedger, fully independent with 4 lever in cab cable controls. Boot flailed head with roller. Done very little work and kept inside. Excellent condition £6,250 % Shaun 07850 978188 C6856 AGRIMASTER Hedgecutter Golden 48W model tractor 3 point linkage mounted & independent pump hydraulic oil supply to machine, 2007 model done very little work fitted 1.25m bracket mounted model T125R flail head allows adjustment on box section beam, ‘T’ section boot flails with rear roller, 5 spool lever controls to cab, 4.8m reach, built in oil cooler, road lights, all good paintwork Very Good condition £4,995 % Chris C 01926 338639 S6395 TURNER Hydomower Bracket mounted Hedgecutter c\w 4ft 6” head. Springback arm, 4 spool control block on adjustable arm. Medium Duty Flails Average condition £950 % Shaun 07850 978188 C6890 TWOSE TS526i LP tractor linkage mounted left handed hedgecutter with heavy duty top link, done farm work only, 5.25m (17’6”) reach with 100 degree power slew & parallel arm geometry, fully independent pto driven hydraulics, low pressure hyd proportional control in cab joystick with head in/out lever, 1.2m flail head heavy duty type with grass & hedge ‘T’ flails plus rear roller, 50hp reversible head motor & 240 degree rotation plus float, safety breakback, road lights (discounted new price now £17k) Very Good condition £9,600 % Chris C 01926 338639 C6679 BOMFORD Hedgecutter Flail head, Protrim 1500 model 5’ (1.5m) wide with own hydraulic motor drive (high capacity type) & belt drive to flail shaft, fitted ‘T’ section heavy duty flails, rear roller, box section mounting frame, done one season only on mid mounted machine note this is just a flail head for sale Very Good condition £3,850 % Chris C 01926 338639 S7035 2000 ORSI AC 6.5T Telescopic Swing Round hedger, Fully independant with 5ft boot flail head with roller. 6.5M Reach, In cab cable controls. Swings round behind to transport. Road lights. Includes as new 4 ft Cutter head for hedging if prefered. Very Good condition £7,250 % Shaun 07850 978188

21

IRRIGATION EQUIPMENT

C6975 EVENSHOWER Alloy irrigation pipes 10’ (3.1m) long & 2” (50mm) diameter quantity 28 including 7 sprinker heads on risers, latch type fittings. Also 10 x 15’ long dribble type pipes with outlets at 120mm spacing, 1” diameter including steel multi leg stands. All suitable veg crops or similar Good condition poa % Chris C 01926 338639 C6997 IRRIGATION System suitable large scale vegetable/herbs or similar to cover approx 4 to 5 acres, Roda SA black plastic 2” diameter rigid pipes all connect together with quick fit couplers, large quantity 20’ long with Nelson risers & Rotator sprinkler heads (complete with metal securing stakes), lay flat hose system which connects to underground main. Caprari engine driven pump with 4” system & full auto controls cpoupled to 2 cylinder diesel engine on skid plate base, new in 2005 with built in fuel tank built by Dalto Power Products Good condition £4,950 % Chris C 01926 338639 C6840 WRIGHT RAIN Irrigation Reel 100G450 Rainmaker model year 2000 with gun trolley & hand pump for leg hydraulics, turntable type single axle, full Irrigamatic controls, pto windback system, all galvanised framework, offset Nelson gun on wheels Good condition £4,295 % Chris C 01926 338639 S7109 SYKES 6 “ Engine driven Pump appx 11,000 gpm c\w primer pump , Electric start hatz diesel. On 4 wheel chassis , Bauer 6” outlet. Recently overhauled Good condition £5,750 % Shaun 07850 978188 S6584 AQUA Reel Irrigator o 3 small wheels , 25mm pipe , spining 2 outlet distributor Average condition £400 % Shaun 07850 978188

23

C6919 LAMB Creep Feeder shelter type single sided all galvanised, adjustable roller bar front entry, rear access lid to good full length trough & hopper, size 2.5m long & 1.4m deep Good condition £285 % Chris C 01926 338639 S6912 Tyre Scraper 8ft wide on 3 point linkage frame using one third of an earth mover tyre. Also12ft pusher blade to keep feed in check along feed passage. Very Sturdy build. Average condition £300 each % Shaun 07850 978188 C6902 INCUBATOR Lincu Avitec model 864AT, single phase electric with auto turn trays in 6 decks, humidifier unit attached, auto control with variable settings, free standing unit 4’6”x3’x2’6” holds 864 hens eggs & approx 1000 pheasant eggs etc. Complete with Hatcher unit with 4 trays to hold 192 hen eggs, single phase model number SIL 140 recently serviced. Both used on small holding purchased new 4 years ago to be sold together including operator books Very Good condition £1,595 % Chris C 01926 338639 S7134 STAINLESS Milking Jars set of 4 with some pipework from early milking parlour Offers % Shaun 07850 978188 C6794 GRAYS Silage Grab model 245, serrated front blade & solid sides, twin ram type 1.6m wide with all good tight tines x 10, Manitou fittings plus hydraulic couplings on top rail, new in 1999 all very straight & tidy with good rams & some new tines, operator instruction book included Very Good condition £750 % Chris C 01926 338639 C6709 ALFA LAVALL Milking parlour equipment ex 20/20 system now dismantled. Items remaining are - Glass jars & ACR units, Candle jetter washers x 10, milk pump. ACR units are 12 x older version. Please phone for more details Good condition poa % Chris C 01926 338639 S7227 PORTEQUIP Feed Trailer For Cattle, Solid floor type 14ft by 5ft. 11.5/80 15.3 tyres on 6 stud single axle. Hardly Used appx 2 Years old Excellent condition £1,200 % Shaun 07850 978188 C6901 FARROWING CRATES Set 4 free standing type qty 3 all tubular galvanised with opening sides actuated by sow standing on gas strut system with counterweight, adjustable rear gate, front trough & water supply, length 7’3” (6’ for sow). Green painted single crate all painted has legs to bolt to floor, rear gate, fixed sides, front trough, 6’ long for sow, little used. Sold as one lot Very Good condition £400 % Chris C 01926 338639 C6799 COTSWOLD Bulk Tank dairy hot water automatic washer unit, stainless steel with control panel, cold water feed, size 110 x 52 x 38 cms. Requires some refurb work (motherboard), 18 months old used with 2 tanks of 2000 & 1700 litre capacity Good condition poa % Chris C 01926 338639 C7014 BATEMAN

LIVESTOCK EQUIPMENT

S7031 IAE Lamb Creep Feeders Galvanised steel, Converted to end tow with 2 wheels and one and drawbar at other. 89” Long by 43” deep Good condition £200 each % Shaun 07850 978188 C6641 LIVESTOCK Pet Cremator/Incinerator made by J G Shelton & Co, installed new in 2000 and used in commercial animal cremation business. Capacity up to 50kg/hr using diesel fuel (28 sec) and 3 phase electrics, Fully compliant free standing unit with footprint approx 10’6” x 6’, chamber size 4’6” x 2’6” and fitted with sluice gate type access door. Manual recording system, full control panel & uses small compressor for air control, twin burners, side fans, fire brick furnace, full vertical flue to outside. Hand type ashes grinder. All in working order. Very Good condition £4,750 % Chris C 01926 338639 F3538 VARIOUS Electric fencing equipment including 4 electric fencer units, rope type fencing wire, insulators and posts. poa % 07503 531889 S6911 THISTLETHWAITE Turnover Crush Hydraulically operated fully galvanized steel, with hydraulic belly belts to hold animal. Spool valves mounted on frame to operate. Can be Bolted to floor or mounted on tractor 3 point linkage. Very Good condition £5,950 % Shaun 07850 978188 C6897 GALVANISED Field/Yard Gates IAE Continental Cattle type heavy duty 12’ long with box section ends, vertical stays & 6 bars of 45mm tube, new unused with some fittings - quantity 3. Also single 14’ gate with fittings (like Stamford field gate) 7 bar type with 30mm intermediate & 45mm top & bottom round bars. All new unused stored inside, sold as one lot Excellent condition £460 % Chris C 01926 338639

Heavy duty calf dehorning crate, mobile model with end wheels & lift up handles, adjustable front guillotine yoke gate with chin rest & straps, rear adustable lock bar system, mesh floor. All bright unmarked galvanised steel very little used good saving on new Excellent condition £530 % Chris C 01926 338639 C6918 CALF Creep Feeder galvanised panels on black box section painted frame, size 8’ x5’x6’ on skids, adjustable top bar to vertical entry spaces, good trough with hayrack & large opening top, tractor linkage & pallet tine handling facility Very Good condition £480 % Chris C 01926 338639 C6903 PHARMWEIGH Lamb & Pig Weigher mobile weighcrate with full digital operation including auto control Drafting gate attachment unit, stainless steel construction with concertina end gates & adjustable side gate (for animal size), 12 volt operating system with readout & control panels on top section with aerosol marker storage trays. Can be used with hand held EID reader, all very straight fully working condition Very Good condition £3,375 % Chris C 01926 338639 C6971 CATTLE Feed Barrier 3 in 1 free standing units, all galvanised steel work with hardwood square troughs, angled barriers with hay rack mesh grill & solid panel back above. Quantity 3 at 15’ long plus one at 7’ which requires trough timber. All adjustable in height on square section long legs, stored inside Good condition £525 % Chris C 01926 338639 S6564 CLARK Feed Pump 2.2 Kw on stand (3ph) 2820 rpm 4.5 amp, also similar Brook Crompton Pump and 7.5 kw 3 ph Pump Good condition % Shaun 07850 978188 S7074 BATEMAN Calf Creep Feeder c\w 3 Point linkage attachments to move. Galvanised steel panels with painted steel frame. Good condition £400 % Shaun 07850 978188 S7075 Creep feeder In Galvanised steel, 8ft by 4ft with 4 wheels suitable for sheep. Very Good condition £200 % Shaun 07850 978188 S7072 Sheep pen gates Galvanised steel, 6 ft wide. Appx 20 some as new mostly very good. Stored inside Very Good condition % Shaun 07850 978188 C6930 IRONWORK Double sided shelter type mobile lamb creep feeders, overall size 6’ x 6’ fully galvanized steel with square profile corrugated roof panels, steel end wheels with handles at opposite end, 7 space openings with adjustable top bar for lamb size. Heavy duty quality make (WM Ironwork) all very straight & tidy. Quantity 5, price is for lot Good condition £1,450 % Chris C 01926 338639 C3635 CATTLE TROUGHS to fit between 15’ stanchions or hang on to feed barriers, galvanised steel (14’9” long) construction with horizontal black plastic semi circular twin wall inserts (for feed trough), 18” wide 8” deep, quantity 6. Also hayracks to fit above if rquired Good condition poa % Chris C 01926 338639

24

LOADERS AGRIC/ INDUSTRIAL

C6828 MASSEY FERGUSON Beet Bucket to fit 80/880 model power loader, 5’6” wide & 2’6” high, done little work & all straight with good bottom tine bars, paintwork dull Good condition £165 % Chris C 01926 338639

F3426 KOMATSU D53S-17 Tracked Drott. 110hp, 3 speed powershift, 4-in-1 bucket. Heavy duty loading shovel. Track gear good. No ripper. 8300 recorded hours. Has had replacement engine. On farm use only recently. Good condition £12,500 % 07503 531889 F3433 BOMAG K301 Sheeps Foot Compactor. Cummins V8, 3 speed powershift. Hydraulic blade. A large and formidable piece of kit! Average condition £6,450 poa % 07503 531889 S6899 MUIR HILL A 5000 4wd & 4 wheel steering Loader with Perkins 6.354 engine, Runs well appx 6000 hours. 15.5 - 25 tyres between 10 & 50% All Glass in cab. Framework to carry attachments Good condition £2,950 % Shaun 07850 978188 S7127 1998 BAC Toe Tip Bucket 8ft by 4ft 6” deep by 5ftr 6” tall with good replaceble blade and brackets for JCB or Volvo Shovel. Good condition % Shaun 07850 978188 S7195 1996 ALBUTT H120 12 Ft Grain pusher (Long) with 7ft blade and bolt on Matbro/JD brackets. Very Staright. Easily change for alternative machine. Very Good condition £700 % Shaun 07850 978188 C6535 SANDERSON Bulk Bucket ex Rough Terrain Forklift, 8ft wide, 3’6” high & 4’6” deep, twin ram tip on backframe with fitting to suit pallet tine rail - could easily be modified to have brackets welded for other fitting type, yellow paintwork, bucket in all sound order Good condition £695 % Chris C 01926 338639 C6981 BACK ACTOR unit ex MF 40 wheeled digger, 220 (Davis) model type with all fittings to go back on to a tractor or modified to fit on telescopic loader etc. sliding backframe, hyd stabilser legs, spool lever controls on machine, 12” digging bucket with teeth Good condition £500 % Chris C 01926 338639 S6704 INTERNATIONAL 3434 Industrial loader tractor complete with power loader and twin cylinder compressor on back. 6ft power bucket, Pallet tines and muck fork. 70% 14.9 - 24 rears. Single door cab Good condition £2,300 % Shaun 07850 978188 S6871 1995 AGRILIFT 7m 2600 KGs Lift Telehandler with 4 wheel steering axles, 380/70 -20 tyres. Only 4500 hours. Pallet Tines & Bucket Good condition £6,950 % Shaun 07850 978188 C7006 MASSEY FERGUSON 203 Industrial loader tractor, 2wd manual transmission, power steering, extended loader arm kit fitted Browns 4 tine wide fork/bale spike with power tipping ram, rear concrete ballast block, Perkins 3 cyl engine (MF 35 type), 14.9-24 agric tread good rear tyres with plastic mudguards, 10.5-18 front tyres. All working but requires crankshaft drive to hyd pump repair. Average condition £1,495 % Chris C 01926 338639 C7001 MF 40 front end trip loader with all good manure fork, all complete with fitting brackets & hydraulic rams etc. to fit MF 35 & 135 tractors Good condition £240 % Chris C 01926 338639 C6923 LOADER Implements - Chillton Manubal round bale handler, tubular vertical hydraulic ram operated opening side arms suit squeezing wrapped round bales (operates like your hand, does not pivot), Matbro fittings. - Slewtic 8 tine Sheargrab 4’ wide with solid sides, serrated front & side blades, twin ram system, Euro/Quicke loader fittings. - Cherry 9 tine Muck fork & grab, 7’6” wide, good rams, Matbro fittings, requires new tine base plate & some grab tines Good condition poa % Chris C 01926 338639 S6705 FORDSON Power Major Fitted Sturdy Power loader, roll frame, 70% 11- 36 tyres, cast fronts. Power Steering, Very Good runner Good condition % Shaun 07850 978188

25

MILL & MIXERS

C6825 BENTALL Roller Mill with single phase electric motor drive, twin 5” wide 12” diameter rollers, grooved single driven roller, requires guard to belts, model type 1207, unused for a while but rollers run freely, small hopper above Average condition £465 % Chris C 01926 338639 S7207 SKIOLD BM3 HF4 Fixed Hammer milll / Blower with 18.5 kw 3 phase motor. Mill 24” By 6”, 5” feed pipe and 5” Outlet. Will fill high Silo. Good condition £600 % Shaun 07850 978188 C6905 ALVAN BLANCH M90 1 tonne horizontal chain & slat mixer, 3 phase 2.2kw electric motor drive, can have auto pulsing system utilised, recent new chain & slats plus sprocket drive, all in sound order but no mill attached Good condition £900 % Chris C 01926 338639 C6926 ROWLANDS Steel Hopper on long legs suitable for use over mill & mix machine (approx 1 tonne capacity). Last used with 1 tonne mixer & includes President trip weigher (model P5GDE) & straight 24’ long 3.5” filling auger Good condition £495 % Chris C 01926 338639 C7016 WAKELY Dry Crimper Processing Mill, mobile model 510, trailed unit with large 2 tonne + top hopper, twin rollers size 510 x 300mm with fully adjustable feed flap above, capacity 9 - 12 tph, pto & gearbox drive with oil tank, 205R16 tyres & mudguards, discharge elevator 3.2m long adjusts for height, yellow paintwork & galv steel hopper panels, approx 7 years old on small farm Good condition £4,850 % Chris C 01926 338639 S7214 RECO MENGELE 4 Ton Mixer Wagon Axle removed for fixed installation. Appx 11ft by 6FT Suitable for mixing various materials. Average condition % Shaun 07850 978188 C6892 HAFER BOY Universal 40 Roller Mill, 4kw 3 phase electric motor drive converted to double powered rollers (good for beans etc.), 10” dia & 5” wide approx stainless rollers, lever operated feed flap & roller adjust, currently used on track system under feed bins to fill big blue barrels with dust extractor hose but can be wall mounted with bag clamp Good condition £545 % Chris C 01926 338639 C7015 TOTE BINS Pair strong black plastic type made by Mailbox Mouldings, 1 tonne plus capacity top fill with weatherproof cap, central tapered bottom discharge with adjustable rotating slide openers, square section 1.2m square & 2.4m overall height in sturdy galvanised steel frame, pallet tine handling boxes, stackable. Sold as a pair Good condition £460 % Chris C 01926 338639 S6729 SIMON BARRON 125 series Extruding Press to make 6mm diameter pellets of Wood chippings Appx 20mm long. Plus Seperating Cooler to cool after pressing, Miracle Hammer mill with hopper over to prepare And Simon Barron (Paul Clochem) Type 200 -6 Verical dryer if woodchip is Damp. Set up as production line Very Good condition £35,000 % Shaun 07850 978188

S7073 SILOS AND STORAGE SYS Meal Mixer In Galvanised steel uses 45 degree auger bottomed hopper to mix, driven by split phase motor. Only 7ft 6” tall. Also Bentall 4” Roller mill with small hopper & split phase motor. Very Good condition £975 % Shaun 07850 978188 S7043 1994 CARAVAGGI 120 - M Trailed mobile PTO driven 120 hammer mill with 2.5 ton Mixer. Features long high level discharge spout. Not Used Recently but Very Soild. Single Axle to transport Good condition % Shaun 07850 978188 S7209 2002 DANAGRI Skiold KB300/3 12” Roller Mill c\w 7.5 Kw Motor. Very Clean. Good condition £950 % Shaun 07850 978188 S6563 BRITON Christy & Norris LB4 Hammer mill, 4” screen inc spares, 2920 Rpm 3 phase 12.5 hp motor.Dismantled for inspection and removal. Average condition % Shaun 07850 978188 S7140 BAMFORD Roller Mill 9” C\w hammer mill, Vintage Flat belt driven model complete and kept inside. Plus Edlington EG No 2 Cut box chopper Good condition % Shaun 07850 978188 C6694 FRASER FB7 Roller Mill on stand with steel feed hopper above (approx 1.5 ton capacity), 3 phase electric motor drive, 7” wide rollers 15” & 9” diameter need regrooving. With Bentall 1/2 ton vertical mixer & short auger from mixer, bottom bearing needs replacing but otherwise sound Average condition £845 % Chris C 01926 338639 S7217 ARCH Vertical mixer In stand c\w hammer mill and 3 phase motors. Built in frame with 2 Hoppers to feed, 1 appx half ton the other 3/4 ton. Large switch panel and 13ft by 6” auger. Good condition £500 % Shaun 07850 978188

26

MISCELLANEOUS

C5417 KING Hiab type Crane mounted on all steel strong subframe last used to fit into rear of grain trailer chassis (used on mono 10 tonne), easily mounts/dismounts, hydraulic stabiliser legs, spool valve controls to one side, push out last section with hook lifts 1/2 tonne plus at full stretch, long hoses to connect to tractor hydraulics, swivels approx 300 degrees, easily adapts to fit other operations Good condition £1,295 % Chris C 01926 338639 S7070 QUALTERS AND SMITH 180A Sawmaster 3 phase powered bandsaw for steel cutting c\w workvice, powered head lift etc. Industrial quality machine.Also Pehako Bandsaw, more basic spec, 3 phase, POA. Good condition £600 % Shaun 07850 978188 F3435 Moving Floor Bulk Hopper 10t capacity with rubber belt floor driven by 3 phase motor. Ajustable shute. Suitable to feed veg washer or bulk bagging set-up. poa % 07503 531889 C6865 WORKSHOP Crane (engine lift) heavy duty model with extending arm, made by CAM on 4 castor wheels, hand pump hydraulic lift ram, all box section easy to manoeuvre, end hook will reach over frame limit, approx 1 tonne lift at short arm Good condition £225 % Chris C 01926 338639 S7137 MAX ARC WELDER 3 phase oil cooled stick welder. C|w cables and kit Good condition £100 % Shaun 07850 978188 S7136 GOVERNESS Cart 2 wheel pony cart. Rear access c\w shafts Good condition % Shaun 07850 978188 C6929 PROFILINE 431 pto drive tractor mounted woodchipper, 2004 model with swivelling deck allows machine to operate at different postions to tractor, large hopper with safety trip bar, adjustable top chute, pair new blades, can take up to 11” timber, 540 pto drive, hopper extension folds for transport, free standing off tractor. Heavy duty machine all in full working order Very Good condition £5,450 % Chris C 01926 338639 S7020 RAYBURN Combination cooker Oil Fired, Heats hot water and radiators plus cooks. Cream enamel finish. Taken out but still in 1 piece, wrapped ready to go Good condition £1,200 % Shaun 07850 978188 C6896 SPALDINGS Workshop Compressor made by C &H compressors, model AP28, TA80. Believed to be 28cfm with a 205 litre tank, twin piston belt driven compressor unit from 3 phase elec motor, 150 psi SWP, free standing with horizontal steel tank size 5’ x 18”,safety checked on farm 2013 Good condition £395 % Chris C 01926 338639 F3540 Trailed road/paddock sweeper with collection hopper. Pto driven. Older machine. poa % 07503 531889 S6920 PERKINS 248 Engine Ex MF 487 Combine, Recent complete overhaul. Removed on frame c\w fuel tank, Radiator & control panel. Very Good condition % Shaun 07850 978188 S7138 MATTEI BRI 44 Screw Vane compressor 3ph. Caw hose & fittings. Good condition £150 % Shaun 07850 978188 S7208 PTO Drive Unit Powered by 3 phase 15 Kva Electric motor. 540 PTO Output shaft From Gearbox. Suitable for fixed installation of Machine. Very Good condition % Shaun 07850 978188 S7193 STURDILUX 7ft Mounted Brusher with cat 1 & 2 linkage pins and 2 castor wheels. Recent mixed nylon & steel bristles. PTO driven ( 540) Good condition £350 % Shaun 07850 978188 S7078 PETTIT Ramps Pair Of Heavy Duty Trailer backing ramps to gain access to hopper etc. 8ft by 4ft by 12” lift Deck made of 3/4” Plate. Serious stuff Very Good condition £800 % Shaun 07850 978188 C6920 KING HITTER Post Driver Series 3 model full specification made by Fairbrother (New Zealand), 3 point linkage mounted with hyd top link to 12.6” mast, hyd side shift ram, 250kg weight on cable actuation hits post support block, counterbalance weight, 5 x rear spool valve operator controls, demount stands, new in 2006 with all good paintwork. Contractor spec will earn its keep Very Good condition £4,295 % Chris C 01926 338639 S7139 TRUECRAFT Air Line Greaser Workshop air powered greaser fits on tub. % Shaun 07850 978188 S6566 BROOK CROMPTON Electric motors Varous all 3 phase including 1.5 Kw 1435 rpm, 2.2 kw 2840 rpm, 4kw flanged 144 rpm, 0.3 Kw 940 rpm. 3 kw, 1420 rpm, damaged fins, no cover. AEC 1hp 960 rpm. Good condition POA % Shaun 07850 978188 C6917 HYDROVANE Compressor trailed mobile unit fitted twin cylinder Deutz air cooled diesel engine driving Aerzed compressor, 24cfm at 9 bar, grp lift up cover, 155/80R13 tyres, ring hitch, lights, hose, electric start, working machine blows light mist of oil with air (compressor needs attention) Average condition £500 % Chris C 01926 338639

C6977 LOG SPLITTER Tractor mounted pto driven with screw cone splitter function, log platform & top rail guard, requires cover for pto shaft Average condition £195 % Chris C 01926 338639 F3521 2003 DESIGN Hydraulic Power Pack Mains electricity driven hydraulic power pack with electric motor. Suitable for running Mini bale wrappers or similar hydraulicly driven equipment. Call for more details Very Good condition £3,650 % 07503 531889 C6646 DANLINE Brushmate Rotary Brush/Sweeper, 3 point tractor hitch to fit front or rear linkage, pto drive to good 18” diameter nylon & wire brush 6’ wide, swivel head allows left & right angling, built in water tank for use as dust suppression, caster wheels to assist level working Good condition £1,250 % Chris C 01926 338639 C6721 SWIFT Challenger 470/2SE Touring Caravan, 2 berth single axle 4.7m long fully fitted with shower & built in cassette WC, double glazed windows, electric & gas appliances including water heater, room heater, hob & oven, fridge etc. recent new 12 volt battery & water pump, all good tyres with new spare, mains elec hook up lead, Calor & Propane regulators, water & waste containers tow hitch cover lock. Quality caravan with lots of storage space suit student or as a holiday tourer, includes awning Good condition £1,150 % Chris C 01926 338639 S7191 2011 BEMA 700 Series 8ft wide Snow plough, 3point linkage mountable on front or back of tractor. C\w 2 depth wheels. Pivots either way. Excellent condition £1,100 % Shaun 07850 978188 F3539 VARIOUS Workshop Tools 3ph arc welder, Spaldings band saw and portable compressor, pillar drill and bench grinder. poa % 07503 531889 C6684 PERKINS Engines pair 6 cylinder diesel non turbo ex commercial vehicles, 6.354 type (one later 6.354.4) non running but believed to be all complete (some components loose). Ideal for use in irrigation pumps etc. or for spares. Price is for pair Average condition £560 % Chris C 01926 338639 C6915 BOMFORD Snowplough with 6’6” wide angled blade on subframe with hydraulic ram raise & lower system, fitting brackets go under front of tractor from weight frame bolts (last used on a Ford 6600 tractor). Blade jockey wheels at rear plus facility to fit rubber bottom blade Good condition £425 % Chris C 01926 338639 S7133 2006 LISTER PETTER LPW 3 MA Cabinet enclosed quiet Generator 10.3 Kw 240v. Fitted automains failure kit plus supply changover box. Hardly used virtually as new. Bargain Excellent condition £2,300 % Shaun 07850 978188 S7069 MIGTRONIC Automig 250 Mig welder, 3 phase, 250 amp, c\w sound welding nozzle & cables. Good condition £125 % Shaun 07850 978188 C6954 PARMITER Post Bumper Contractor model, linkage mounted with chain actuator to moving weight, hydraulic ram fitted in place of screw adjuster for mast levelling, post clamp system, operates at 90 degrees to rear of tractor, all fully working. Good condition £675 % Chris C 01926 338639 F3465 POSTMASTER 8000 Post Driver Has been used on a skid steer loader and would suit a telescopic loader or tractor. A compact machine that uses a hydraulic drop hammer that gives fast impact (50 per minute)as opposed to brute force! Very Good condition poa % 07503 531889 S6702 TELEGRAPH Poles Appx 28ft long 10” at base appx 40 Good condition £45 each % Shaun 07850 978188 C6751 BEMA Agrar Rotary sweeper, tractor linkage mounted for front or rear, 2.3m working width complete with detach steel tipping collector box, swivel headstock, hyd motor drive to good 18” nylon & steel brush, pair caster wheels on rear, demount stand. Done little work Very Good condition £1,125 % Chris C 01926 338639 S6518 MABE Cardboard Baler 3phase Hydraulic powered press to compress packaging etc. Industrial stationary type Good condition £7,000 % Shaun 07850 978188 C6970 SLEEPERS Timber traditional all well preserved standard size type 8’6” long 10” wide x 5” thick, quantity 50 preferably sold as one lot. Also set 3 plastic Omnium waste bins on caster wheels, believed to be 1100 lite capacity in yellow with fully opening lids - require waste lorry mechanism to tip/empty - these priced at £145 for lot Good condition £650 % Chris C 01926 338639 S4735 BOM Post Hole Borers Hydraulically driven to fit on Forklift tine. 6”, (Opt 9” & 12”) Easy to fit & use prices from New condition £1,200 % Shaun 07850 978188 S6875 100 Kva Cabinet installed generator with John Deere 140 HP diesel engine. 3 phase. Good condition £6,500 % Shaun 07850 978188 S6297 HOES Drainage Machine Self propelled, hydrostatically driven unit on 16” tracks with Ford engine. Comes with 7ft 100mm Draining chain. Plus Seperate clean up conveyer 8ft by 19” and filling slitter. Average condition £7,500 % Shaun 07850 978188

27

MUCK & SLURRY EQUIPMENT

C6873 FRASER Muckmaster 1250T side discharge rotary muck spreader, twin axle 1998 model with leaf springs & hyd brakes, 16.0/70-20 tyres, 12.5 cu/yd capacity with hyd lid & good spreading chains & flails on square drive shaft, fully guarded pto, road lights, working machine all sound barrel & chassis with some paintwork rust areas Good condition £2,250 % Chris C 01926 338639 S7029 2010 K TWO DESIGNS

Duo 1200 Mk 1V Single axle 12 Ton Manure spreader with 2 Vertical beaters, HD Floor chain, Intermediate slip clutch, Side ladder, Top protection boards, Road lights on 90% 580/70 R38 tyres Excellent condition £17,000 % Shaun 07850 978188 S7126 2006 MARSHALL 105 10.5 Cubic meter Barrel spreader c\w hydrauilic top lid. 540 PTO, 90% 15.5/70 R18 tyres. Done littele work and stored under cover. % Shaun 07850 978188


• See also the wanted section and read the buying/selling details before calling

38 JUNE 2014 C6966 SAMSON 12T HM rear discharge mauck spreader, single axle 12 tonne capacity fitted good 23.1-34 tyres, wide angle 1000 pto drive to twin vertical rear beaters fitted good tips, triple chain & slat variable speed floor (flat link chains x 6), road lights, hyd brakes, good straight sided machine with sound floor on 17’ long body & front mesh top guard, stored undercover Good condition £4,450 % Chris C 01926 338639 S6682 SLURRY Stirrer PTO driven type c\w cat 1/2 linkage to mount on tractor. Appx 14 ft long. Solid and straight for age Good condition £375 % Shaun 07850 978188

28

PLOUGHS

S6996 1996 DOWDESWELL DP 160S 7 Furrow Double Offset Reversible plough to suit Challenger, SCN Bodies, adjustable Skimmer legs, 10/75 -18.3 wheel with new bushes. 3ft point to point 28” Underbeam.Modded headstock. Good condition £7,950 % Shaun 07850 978188 S5202 DOWDESWELL Furrow press Standard Double ring press without arm but in very sound order. Suit 5 x 14” furrows. 30 degree 650mm Rings 200mm apart. Good condition £425 % Shaun 07850 978188 C6339 DOWDESWELL Furrow Press adjustable model currently set to follow 5 x 14” furrow plough, 700mm diameter 30 degree cast press rings 11 at front & 10 at rear (spare average ring to make 22) in 88” wide frame, cleaner chains, 3 point hitch frame for transport, hardwood bearings model which have been replaced with genuine type Average condition £750 % Chris C 01926 338639 S6569 DOWDESWELL Skimmers To Fit DP7 D2 Hiclearance plough, Set of 4 % Shaun 07850 978188 S6311 2000 NAUD 8 Furrow Semi mounted Hydraulic Autoreset plough. Pair of 400/65 - 22.5 depth tyres after 5th furrow. Good long DD type bodies, Manure skims and Claydon furrow cracker. Cat 3 drawshaft. Suit up to 300HP. Manual varaible width. Good condition £9,750 % Shaun 07850 978188 S7092 2004 DOWDESWELL DP 140 MA 6 Plus 1 (7) Furrow reversible plough with manual 12 - 18” furrow width. Hydraulic front furrows, adjustable Manure skims, Good DDS bodies on unmarked frogs. Well mounted 10/75 - 15 depth wheel. Scaloped rear discs Very Good condition £11,500 % Shaun 07850 978188 C6820 DOWDESWELL DP7E reversible 5 furrow (4+1) plough, fully refurbished approx 2005/6, UCN adjustable pitch type bodies, rear disc coulters, full set square shank skimmers, 12” furrow width & 34” point to point clearance, hydraulic front furrow width adjustment, later type large depth wheel, all wings & points good, mouldboard metal starting to thin at ends but life left in them, good paintwork all straight plough with no welds Very Good condition £3,250 % Chris C 01926 338639 C6995 KVERNELAND LB85/240 Reversible 5 furrow (4+1) plough, hydraulic vari-width model with rear disc coulters & number 8 bodies with tail pieces, 240 horsepower headstock, full set skims & trashboards, 85cm point to point & 70cm underbeam clearances, rubber tyred depth wheel, all straight plough soon requiring metalwork on skimmers & landsides + points, bodies good but one thinning Good condition £4,295 % Chris C 01926 338639 S6963 LEMKIN RL 3 Furrow Single acting Sprung return Reversible Average condition £400 % Shaun 07850 978188 S7067 LYNX Double ring press C\w Lemkin Hydraulic release press arm (as new). 27” 30 degree rings. 8ft wide with baskets of rings to add weight. Very Good condition % Shaun 07850 978188 S6950 JOHN H RUNDLE Double ring Press 54” Wide 14 Ring press. Each ring 26” (30 degree) Comes complete with linkage to carry plus simple plough arm Very Good condition £375 % Shaun 07850 978188 S6491 1997 DOWDEWELL Furrow Press 2 rows of 30 degree cast rings appx 100” working width. Completely rebulit last year at a cost exeeding £2000 Very Good condition £1,000 % Shaun 07850 978188 S6421 1996 NAUD RX3 - 09 + 1 3 + 1 ( 4) 14” Furrow reversible plough, 38” point to point, 29” underbeam, Original digger bodies still very good, manure skims & depth wheel. Very Good condition £2,900 % Shaun 07850 978188 S7086 3 Furrow Conventional plough with modified headstock to offset for ploughing out hedgebottoms.2 discs, 10 -12” furrows Good condition % Shaun 07850 978188 S5263 DOWDESWELL DP1 5 Furrow reversible, Good SCN bodies, no skims but fitted trashboards and no discs. Straight on land single offset plough Good condition £950 % Shaun 07850 978188 S7204 KVERNELAND PB 8 Semi Mounted autoreset plough. 14” No 8 Bodies mostly good, Cat 3 cross shaft. 400/60 - 15.5 Depth /transport wheel. Good condition £4,000 % Shaun 07850 978188 S6763 DOWDESWELL DP7 E 5 furrow (4 plus 1) 14” Reversible, Good UCN bodies & Manure Skims Average condition % Shaun 07850 978188

29

POTATO HARVESTERS & PLANTERS

rS6856 REEKIE Cleanflow 2000M4 2 Row unmanned hravester with Cart elevator replaced with a 1.8m By 0.8m Conveyer to Windrow crop 2 rows across. 40mm first & 2nd webs. Good condition £2,000 % Shaun 07850 978188 S7167 2003 GRIMME Wavy Webb Kit For GZ Harvester, c\w All steel panels a nd rollers. Uses standard web so none inclused. Good condition £1,200 % Shaun 07850 978188 C6985 HASSIA GLB 2 row potato planter in Bamlett colours, twin treaded tyres drive wheels, front openers with disc formers, belt agitators, tipping hopper, currently set at 36” but all adjustable. Also - Keyag Squire Bedformer, linkage mounted 8’ wide box section frame, fold out heavy markers, large adjustable forming bodies, centre stabiliser blade priced at £495 Good condition £465 % Chris C 01926 338639 C6782 GRIMME GB Two row trailed harvester, 36” wide continental webs with scrubber, split front shares, steering ram, adjustable axle, high top picking off table under canopy with frame, long cart elevator slews over front of machine for transport. Unused & dry stored for a few years so suitable refurb or parts. Also Grimme Continental 89 two row harvester with front diablos & twin disc system, continental webs & clod fingers, treaded tyres, fold up cart elevator - again suitable parts or refurb poa % Chris C 01926 338639

S7080 FERRI F200 Straw chopper or Potato topper as configured. 2m Breed. 540 rpm. Very Straight.Rear mounted. Good condition £1,200 % Shaun 07850 978188 S6805 2009 AVR Esprit 2 Row Offset drawbar Wheeled drive harvester, 1700mm main web 50mm pitch. Crossflow Evolution cleaning system and Picking off table with canopy. Exceptional machine, also 2010 model without picking table Excellent condition % Shaun 07850 978188 S6028 SCOTT GRIMME QRS 2 Row Unmanned harvester, 2 Full diablos, 4 discs, 2 2 piece shares, clod fingers, Ist web elecric agiatation, Rear wheel steering Dahlman rollers unmarked. Electric in cab controls. Very Good condition £2,300 % Shaun 07850 978188 S6943 1988 GRIMME Q Continental 2 Row unmanned harvester with recent 50mm main web, Steering axle and drawwbar . Star separation , 800mm cart elevator. Average condition £1,400 % Shaun 07850 978188 C6908 GYMNAST 91-2 single row tractor linkage mounted potato harvester, front diablo split shares & discs to good 45mm continental web on lifting section fitted on brackets to o/s of tractor. Picking off area behind tractor for 4 persons with rubber covered continental web leading to cart elevator attachment, bagging off module for 2 bags displaces cart elevator if required, pto & hydraulic motor drives, bowden cable controls (need attention), all in good order ideal earlies or small acreage/farm shop use Good condition £1,695 % Chris C 01926 338639 S6820 2010 AVR Rafale Front mounted Potato topper c\w RH outlet cross conveyer. Choice of 2 Very Good condition % Shaun 07850 978188 F3471 1996 STANDEN H200 Big Boy Potato Planter Type BB2, 2 row planter can be used for ridges or bed system. Bulk hopper and cup type feeders. Electric controls and ridging bodies. Machine has done very little work, is in very good condition and stored under cover. Very Good condition £2,950 % 07503 531889 S7084 GRIMME Bagging Set for Allrounder Full rig including Bagging conveyer part web, part roller and short elevator. Fiscbein Fixed head hydraulic driven stitcher. 1992 Pearson nu pack No 3 bagger. Various fittings. Good condition % Shaun 07850 978188 S7205 2001 REEKIE NETAGO Dominant 3174 CFO 2 Row Manned Harvester with Wheel drive. Hyd Lane Adjustment, 2 full diablos, 1700 wide 50mm pitch main web with clod fingers over. Unmarked dahlman rollers, 4 man picking table with canopy, varoius spares. Lifted circa 70 acres per year. Good condition £8,500 % Shaun 07850 978188 S7046 GRIMME Bedtiller To prepare 2 Rows c\w Grimme toolbars and Ridging bodies. Made by Howard substantial machine. Excellent condition £3,000 % Shaun 07850 978188 C6986 GRIMME QC Continental 2 row manned potato harvester, 1988 model with lane & steering adjustment, front diablos with discs & split shares, twin continental webs (45 & 35mm) feed to set 4 star cleaners, haulm & clod fingers across webs, cross conveyor to picking off module above rear of machine feeds to cart elevator, in cab controls, adjustable axles to suit row widths, small farm use only dry stored Good condition £1,850 % Chris C 01926 338639 S7064 STANDEN H240 Big Boy planter 2 Row Automated Belt fed planter with hydraulic depth on 10/80 - 12 tyres. Hood Coverer. Good condition % Shaun 07850 978188 S6136 KEYAG GRUSE VL18 BM 2 row mounted automatic planter. Fitted Rigid Bodies, electric monitor, Cup inserts, Coulter wheels. 10/80 -12 wheels Good condition £950 % Shaun 07850 978188 F3543 STANDEN PEARSON T3 3 Row Harvesting System. Walterscheid PTO shaft. Adjustable Diablo rollers and hydraulic adjustment of the digger to main web step and main web agitation. Water cleaning system and “Scotts” rollers. Powered land wheels and hydraulic folding for road transport. High output machine with minimal crop damage and very clean samples. Priced to sell Excellent condition £45,000 % 07503 531889 S7008 2013 AVR GE Force 4 x 85 Double Drive Hook Tine Cultivator, 3.5m wide, fitted 4 - steel wheels, Hydraulic Markers, Vibrating Hood, with Hydraulic automatic ridge pressure control. Suitable for 4 rows 34” (85 cms) Only Donly 80 acres on kind land so hardly used. Excellent condition £19,500 % Shaun 07850 978188 S7096 2007 STANDEN PEARSON BB4 4 Row Potato planter fitted stainless steel shares and sideplates, radar depth control, Belt feed cups, Stainless steel hood coverer, Spare wheel and optional Team Applicatot kit with Amstar Spray nozzles. Very Good condition £14,750 % Shaun 07850 978188 S7158 2000 REEKIE Netago RT170 - S 2 Row Bed tiller in tidy order possibly inc rear hydarulic linkage midified for Hyd top link Good condition £1,900 % Shaun 07850 978188 S6521 AMAC LKU 1700 1.7m Wide front monuted topper unit c\w cross conveyer. PTO driven Good condition % Shaun 07850 978188 S6988 NOBEL “S” Plantmaster 2 Row planter on cage wheels with disc coverers suitable for a variety of planting jobs. Old but all there Average condition Offers % Shaun 07850 978188

30

POTATO/BULB GRADERS & EQUIP

S7223 1995 PEARSON 3.7m Rotaforma Bed Tiller, 1000 RPM, Tidy order includes a new set of blades and Good Ridging Bodies. Good condition % Shaun 07850 978188 S5246 2000 TONG Flat Belt Conveyer Choice avaiable Inc 300mm 3 - 6m long. 550mm by 2.6m. 650mm by 2.8m, 3.8m, 4.5m & 6.2m. 700mm by 3 & 3.6m. All with 3ph motors, some with legs. Very Good condition % Shaun 07850 978188 S7052 TONG 24” 2 Screen Inline Grader c\w cleated belt feed, 2 Screen graders with cross conveyers under, roller table with light over and separate variable speed. 3 phase, Various screens Very Good condition % Shaun 07850 978188 S5245 TONG 36” Screen Grader Choice mounted on Frames basically 50” discharge plus extension of 21”. Both Screens driven by single 3 phase motor. Possiblility of 25/30/35, 40& 50mm screens. Also similar machine with individually driven screens. Recently refurbished. Cross conveyers offered seperately to suit clients needs Good condition £1,400 each % Shaun 07850 978188

C6984 GRADING LINE with Hopper 3 tonne capacity steel receiving hopper 11’ x 8’ with 3’9” variable speed bottom belt feeding 24” inclined cleaning elevator to twin rotary screen 36” wide grader module with 6’ long roller inspection table, twin cross conveyors under, Tong mechanical single head bag weigher, All 3 phase except weigher, currently on raised stands to allow operator platforms each side, various size screens. Also Walthambury 240 mechanical twin head bag weigher, 3 phase with main & trickle belts priced at £495. Plus - Wytrac slewing in/out of store rubber belt elevator, receiving hopper, cleaning section with short cross conveyor at end of primary section, 20’ second adjustable throw second section, old but working - priced at £650 Good condition £2,250 % Chris C 01926 338639 C6469 LOCKWOOD Potato Grader rotary screen type on raised fully adjustable metal legs, hedgehog rubber roller drive roller to 36” wide screen, flat belt dirt conveyor at 90 degrees under screen, 3 phase electric with 7 good screens of various sizes. Good condition poa % Chris C 01926 338639 S7221 2003 JONES

32

C6610 BRICE BAKER Outdoor Grain Silos with drying floors, nest of six 150 tonne capacity each 24’ diameter 7 ring high with perforated above floor drying system, double ring access doors. Paired fan ducting. All very sound galvanised silos located on large concrete pad with easy access. Dismantling on site by professional team with all equipment made ready for transport if required or sold as currently erected for own dismantling Good condition poa % Chris C 01926 338639 S6815 SIMPLEX Drying Bins 12 Inside open top perforated 9ft 6” Diameter drying silos. Each with Central Drying tubes and connections. Buyer to dimantle and remove Very Good condition Offers % Shaun 07850 978188 S7032 UTLETY INGHAM 10 Ton Centre Discharge galvanised Feed Silo on legs, discharges appx 3ft up with slide. Feed pipes and side door appx 20” square. Overall 19ft tall 8ft diameter. Ready to load Average condition £400 % Shaun 07850 978188 C6591 BOYTHORPE Harvestore wet grain silo, 1982 model 4 rings high (55” high each ring, 7 rings circumference (each ring 106” long, single bolted). Can be professionaly dismantled if required Good condition £895 % Chris C 01926 338639

33 Triple Bed Tiller c\w 3 - Heads 64” with tiller blades. Fitted Rear toolbar and hardly used bodies with 2 wheels. Hood Coverer also available. Very tidy machine not overused. Very Good condition £3,950 % Shaun 07850 978188 S7222 BROADWATER TOOLS Box Rotator 1 Ton Model c\w adjustable top arm. JCB Quickfit wide brackets. 42” movable tines. Turnover ram repaired but not the later large one Average condition % Shaun 07850 978188 F3436 HERBERT Rubber belt elevators x2. One 4m overall length including adjustable swan neck. 2m max drop, 750mm wide, 3 phase. Other, 2.5m long, 1.5m drop, 650mm wide belt and single phase. Good condition poa % 07503 531889 S7009 1985 TONG Caretaker 36” All in one Grading line with own hopper, cleaning web , 36” Screen with cross conveyer, Flat belt and roller picking table with soil chutes and underconveyer. Fully covered and 3 phse variable speed. Good condition £5,000 % Shaun 07850 978188 S6075 TONG Caretaker 48 48” Inline grader c\w own hopper, 5 rows of cleaning stars with own cross conveyer, Single screen grader with own 3ft wide cross conveyer. Roller table with soil extraction conveyer underneath. 3 Phase variable speed , rewired recently Good condition % Shaun 07850 978188 S6738 1997 TONG 425 Autoweigher Single 10” White food grade belt. Single phase on 13 amp plug with switch. 2 Bag clamps. On Castor wheels Good condition £475 % Shaun 07850 978188 S7019 TONG Elevating Conveyer, 18” Cleated belt at 45 degrees (2” cleats) Discharge appx 55” High. Single phase variable speed Good condition £500 % Shaun 07850 978188 S7018 Elevating Conveyer Fitted 18” Continental web to clean as it elevates. Appx 10ft long. Fitted 3phase Varible speed drive Average condition £450 % Shaun 07850 978188 S7022 PEAL 900 Box Filler Twin Head, automated, 3 phase filler. Converted to fill 5 or 6ft wide boxes. Tidy for age. Optional Feed conveyer 1m wide by 1.4m long on adjustable legs (3ph) adds £500 Good condition £1,450 % Shaun 07850 978188 S6728 2006 WELVENT 50 by 30 Ft Cold Store, prefabriacted into shed so would remove. Appx 8ft 6” High c\w 2 Outlet in store Cooler and Welvent refrigeration unit inc Digital cotrol panel etc.. Store doors and barriers also available. Very Good condition £8,500 % Shaun 07850 978188 F3411 NICHOLSON SYSTEMS Rubber Coveyors 5m Picking-Off table with a 2.5m trash conveyor. 3ph variable speed & reversible motors. All mounted on a low trailer with full canopy. Good condition poa % 07503 531889 C6818 BOAT HOPPER to suit grading line, mobile on wheels 5.3m long & 2.2m (7ft) wide all steel with opening end & side panels for loading with trailers etc. 700mm wide flat conveyor belt in base with single phase electric motor drive, raised sides at discharge end, painted yellow possibly made by Peal Good condition £1,195 % Chris C 01926 338639 S7013 H K TIMBERS Scotch 1 Ton Potato Boxes, 6ft by 47” by 37.5”,palletised, 6 Board 1” gap, Straight and tidy, good enough to stack 7 high. Very Good condition £35 each % Shaun 07850 978188 S7014 1991 GRIMME KSA 1500 Front Mounted Flail potato topper, C\w cross conveyer discharge belt and 2 depth wheels. Set for 2 - 34” Rows. Good condition £1,500 % Shaun 07850 978188

31

POWER HARROWS

S7083 LELY 400 - 45 4M Roterra Harrows choice of 2 fiited large round haevy duty gearboxes. 450 packers, one not worn. Sound well maintained machines with 70% Club tines. Good condition % Shaun 07850 978188 C6972 KUHN HR302M power harrow, 3m wide 1993 model 1000 pto drive fitted twin adjustable clod boards (front & rear), good 7” long ‘L’ blades & soil side plates, rear 450mm diameter steel packer roller with set scrapers on pin & hole height adjustment. On farm from new, main gearbox (through pto type) has gear backlash chatter but all in full working order. Good condition £1,995 % Chris C 01926 338639 S7154 LELY 3M Professional Harrow c\w Through shaft gearbox and rear linkage. Fitted Flexicoil. Hour clock shoing 525 hours. Good Paintwork Good condition £1,200 % Shaun 07850 978188 C6181 DOWDESWELL End Tow kit to fit power harrow, drawbar section with mounting plates, end wheel section fitted 8.50R10 tyres & hydraulic d/a ram for lift/lower of machine, all painted green Good condition £360 % Chris C 01926 338639 C7009 HOWARD Rotavator 80 inch E series model with twin adjustable depth wheels fitted rubber tyres, refurbished in last few years & done little work since. paintwork, pto, blades, guarding etc. all good. Linkage mounted with 540 pto drive to Selectatilth gearbox, adjustable height rear hood on twin chain adjusters Very Good condition £1,675 % Chris C 01926 338639

SILOS & STORAGE

C6551 HARDI LHY 800 mounted 18m sprayer, 800 litre tank with 6 cylinder pto driven pump, manual controls on machine with 4 section boom control, hydraulic folding gull wing type boom fitted plastic lines & triple nozzle holders (one spray nozzle only fitted). Also demount sprayer &24m boom ex Fastrac & a 1000 litre Hardi plastic tank Average condition Offers % Chris C 01926 338639 C6870 BERTHOUD Self Propelled sprayer, 4000 litre plastic demount tank on Thwaites Alldrive 4wd/4ws chassis, converted in 1993 with 24m hydraulic folding boom, Ford 6 cylinder power unit, Evrard sprayer pump gound speed related, centrifugal rear mounted hyd drive fast fill pump, 4 section boom control can spray at 12m, tilt ram, triple nozzles, Trelleborg 421 twin 600/65-26.5 tyres (all 50-60% good tread) on 8 stud axles plus 13.6-38 set narrow wheels. Forward control cab, manual gearbox. Currently uses centreline GPS control system. Drives but ready for a new transmission clutch & has leaking axle final drives. Will make good value machine when tidied up Average condition £4,995 % Chris C 01926 338639 S7185 BATEMAN

SPRAYERS

C6651 GAMBETTI BARR 18 Metre linkage mounted sprayer, 1000litre main tank with 100 litre clean water tank on side, full hydraulic folding boom with tilt ram & 5 section in cab controls, single stainless lines & filters to each section, adjustable rubber bellows boom suspension, chemical induction hopper, good pto drive to pump, requires 3 spool valves to operate, new on farm in 1999, currently antifreeze stored. Booms all straight but showing rust sections where powder coting paint missing.Used with 700 litre Lely front tank and hyd drive transfer pump, tank frame fits to tractor weight frame. Can be sold less front tank at £2995 Good condition poa % Chris C 01926 338639 S6328 24m Demount unit Suit MB trac or similar. Hyd folding & raise / lower. 2000 litre GRP tank. Single stainless lines. In cab controls. Very Straight Good condition Offers % Shaun 07850 978188 C6957 CLEANACRES Model 185 mounted 12m hydraulic folding sprayer, tubular alloy booms fold as single section from backframe, boom tilt ram, hyd raise & lower, 3 section in cab control, induction hopper, Airtec system with single nozzles at 50cm spacing, 3 cylinder pto drive pump & gearbox to airtec system, self fill facility for 830 litre (185 gallon) plastic tank, Bout marker. Tidy straight sprayer for age with demount stands, requires 2 x da spool valves + 1 x sa supply Good condition £1,195 % Chris C 01926 338639 S7026 CLEANACRES Trailed 12m Sprayer with 1400 litre tank. Galvanised framework. Ramsay Air control system. Single jets. AR 160 4 cylinder pump. 11.5/80 - 15.5 tyres. Average condition £800 % Shaun 07850 978188 C6592 STAINLESS Steel 3000 litre square profile sprayer tank, currently with steel 20 metre hydraulic folding Chafer rear boom fitted & part of pivot steer self propelled unit ex Ford tractor. Tractor not for sale but tank easily made into bowser or unit can be made into trailed sprayer with tracking steering rams, includes Teejet controller, induction hopper, triple nozzles on plastic lines, pto driven diaphragm pump & Pecson fill pump, rear mounted pelleter unit & 8 stud row crop wheels). Requires drawbar extending with ring hitch & boom removing for bowser use. Please phone for photos & details Good condition £1,950 % Chris C 01926 338639 C6973 CHAVIOT

Spraystar 403 self propelled 2wd sprayer, 1990 model with 5940 rec hours on Land Rover 2.5 TD engine, RDS Delta 34i controller recently fitted with flow control, all straight steel hydraulic folding boom with tilt ram will operate at 12/18/20 & 24 metres fitted stainless lines & single nozzles, 6 cyl pump, induction hopper & can wash, foam bout marker, 2000 litre plastic tank, chassis & boom suspension, MOT to 10/3/15, aircon cab all working with joystick boom controls, 5 speed manual g’box drives JCB industrial rear axle fitted 13.3R38 tyres, front 7.50-20 tyres, road lights, additional wheels include 9.5R44 rowcrops plus set 31x15.50-15 & 425/75R20. All fully working good value lightweight sprayer Very Good condition £3,975 % Chris C 01926 338639 C6893 KNIGHT Trailed 2500 litre sprayer with 24m hydraulic folding booms (currently operating at 25m on veg crops), 1986 model can be made to track on 12.4R46 tyres, stainless lines with 5 nozzle heads, stainless induction hopper, self fill facility, 6 cylinder pto driven pump, Ramsey pressure maintain system, boom tilt ram & flip over second boom section allows machine to spray at 12m, Fan Jet spinning disc applicator fitted above sprayer tank Good condition £2,995 % Chris C 01926 338639 C6945 CLEANACRES Atlas 2500 self propelled sprayer, 4wd/4ws 1998 model with hydro transmission & Perkins Phaser 6 cylinder 170hp engine, 8041 rec hours, aircon cab with joystick boom control & spray rate controller can be set to manual or auto, steel gullwing fold 24m boom can also operate at 12/18 & 20 metres on single stainless lines fitted low drift nozzles, 6 cylinder hyd drive rear mounted pump, stainless induction hopper, self fill facility, 2500 litre spray tank & clean water tank above, solenoid valves all recon March ‘13, hydraulic axle suspension with high clearance Poclain motor drives fitted very good 320/85R32 tyres on haevy duty adjustable rims. Requires one rear boom lift bush replacing, not used for 12 months but all in very straight & tidy order. Wide tyres & wheels available from similar machine if required Very Good condition £7,995 % Chris C 01926 338639

Hi Lo 2000 Litre Self proppeled Sprayer c\w 24M booms, RDS Ratemaster 200 Control system, Twin Stainless steel lines and blob marker.Induction Bowl and 100 Washout tank. 70% 12.4 -32 rocrops and Very good 48/25 - 20 Alliance 328 Terras. Good condition £8,000 % Shaun 07850 978188 C6776 CLEANACRES Atlas self propelled sprayer, 4wd/4ws 1995/6 model with Perkins 170hp engine & full hydrostatic transmission, terra tyres size 48x25.00-20 with 35-40% good tread 8 stud fitting plus set 4 rowcrop wheels & tyres size 12.4R32, 2500 litre tank. Contractor specification 24m boom (joystick control) will also spray at 12, 18 & 20 metres, single nozzles on stainless lines, boom tilt ram, hyd driven 6 cylinder sprayer pump. RDS Landquip RS 8000 in cab spray controller with flow meter. Hydraulic axle suspension with oil tank at front of aircon cab. In full working order can have 12 months test if required Good condition poa % Chris C 01926 338639 C6947 ALLMAN Claxton mounted 8 metre sprayer, 410 litres plastic tank, manual fold 3 section boom on bolted height adjust backframe, manual controls on machine, 2 cylinder pto drive pump, kept dry stored suit grass land or smallholding/veg grower Good condition £475 % Chris C 01926 338639 S6758 LANCASTER 3000 Litre Self Propelled 24m sprayer, recent RDS Delta 341 Control box, Air Con Cab, hydro drive. Low houred John Deere 200 plus HP engine. Good Hyd folding booms, Induction bowl and washout tank. As New 18.4 - 38 tyres plus rocrops 270/95 R 48 rocrops Good condition £9,900 % Shaun 07850 978188 C6898 ALLMAN 625 mounted 12 metre 625 litre sprayer, manual fold boom with winch height backframe, manual controls (3 section), single nozzles on plastic lines, good pto drive to 3 cylinder pump, hand lance & long hose fits to valve chest, quantity spares etc. Stored inside unused for a while but fully drained & antifreezed. Currently used as a 6m unit, boom extensions easily refitted. Good condition £550 % Chris C 01926 338639 C6962 HARDI LHY Mega mounted 20m sprayer, 1000 litre 1995 model with induction hopper, in cab 4 section boom control, hydraulic fold booms with plastic lines & triple nozzles plus tilt ram. Clean water tank on side of main tank, 6 cylinder pump with good pto, self fill facility, folding demount stands, quick hitch coupler, all good booms & tidy sprayer with small repair on one end section. Complete with 800 litre round front tank on tractor front weight frame mounted framework, hyd driven transfer pump & pipework. Would split sprayer & front tank Good condition £2,395 % Chris C 01926 338639 S7225 2005 KNIGHT 1835 Self Propelled 3500 Litre, 12/24m Sprayer only 4400 hours mostly owner driven from new.Comes with Auto boom height control, Airtech and conventional Spray sytsems, Laser adgitation,RDS Magic Box 2 Controls Induction bowl Internal and external washing sytems. Perkins 174 HP 6 cyl engine. 70% Rocrops 320/85 R32 & 70% 540/65 R24 Track grip floatation tyres Very Good condition £46,500 % Shaun 07850 978188 S7202 1997 FRAZER

Stealth Agribuggy, 4wd ,4ws ,Heavy Duty 6 stud axles, RDS 341 control system, 1500 litre tank, Gambetti & Barr 24m booms.70 % 9.5 R36 rocrops.New MOT Good condition £13,500 % Shaun 07850 978188 C3228 MALGAR 1100 Gallon (5000 litres) water bowser, mild steel painted blue, single axle with hyd brakes fitted 386/65-22.5 super single tyres, top fill access hatch & bottom rear 2” outlet, Honda 4hp petrol engine driving centrifugal pump for fast sprayer fill. Rear ATV quad bike carry rack with loading ramps, side box rack & lockable steel cabinet, new 1997 - farm use only in very clean order Very Good condition £2,550 % Chris C 01926 338639 S6026 LELY 400 Litre Front mounted tank, c\w hyd driven pump, electrically switched. Brackets to fit MF front weight frame. Good condition % Shaun 07850 978188 C6845 HARDI Mega LPY tractor linkage mounted 1200 litre sprayer, new on farm in 2001 fitted18 metre hydraulic folding boom with 4 section control for single plastic lines fitted triple nozzles, 6 cylinder pto driven diaphragm pump, boom tilt ram, 80 litre clean water rinse tank, induction hopper with latest style can wash nozzle, clothing locker, MoT tested to June 2014, fold up demount legs, road lights. Very tidy sprayer with one small boom repair Very Good condition £4,950 % Chris C 01926 338639

WWW.WRIGHTSREGISTER.COM C6989 RANSOMES Hawk 700 mounted 12 metre sprayer, manual fold boom, 700 litre plastic tank, 3 cylinder pto drive pump, in working order, has been used on Logic atv chassis but fits straight on to a tractor Average condition £345 % Chris C 01926 338639 F3346 STOCKS Trailed Quad Bike Granular Applicator 12 x1meter Stocks Micro Meter applicators mounted on 12m folding boom on ATV trailed chassis. Applicator driven by Briggs and Stratton petrol engine. This unit has had very little use. Excellent condition poa % 07503 531889

34

SUBSOILERS

S6877 SIMBA Flowking 3m subsoiler with 5 legs, Fitted packer with good scrapers. Average paintwork Good condition £3,500 % Shaun 07850 978188 C7011 BOMFORD Subsoiler single leg tractor linkage mounted with adjustable front disc coulter, all good front shins & leg fitted subsoiling foot. Mole foot & follower attachments included. Suit small tractor or for pipe laying with mole system Good condition £300 % Chris C 01926 338639 C7017 COUSINS Level Lift ‘V Form’ Soil Loosener 2.75m (9’) wide heavy duty model 8” x 4” box section frame in ‘V’ formation fitted 5 legs, linkage mounted grassland/arable version with front set disc coulters & large steel adjustable depth wheels, 2001 model fitted flat rear ballastable levelling roller 24” diameter adjusts for depth control, winged feet on good legs, some spare points, done little work from new Very Good condition £3,650 % Chris C 01926 338639 S7181 MILES Mole Drainer Beam Mole drainer c\w 2 rubber tyred transport wheels and plug Good condition £2,500 % Shaun 07850 978188 C5965 HAYLOCK 5 Leg mounted subsoiler, heavy duty linkage mounted 4m wide frame non folding, winged feet & front shins to legs with 2’3” clearance, all mounted in box section frame size 4” x 7”, rear flat bar crumbler roller 3.7m wide on pin & hole depth adjustment, 2 legs good & 3 getting thin at rear, needs big tractor to operate Average condition poa % Chris C 01926 338639 S6764 FLATLIFT 5 leg Subsoiler 2 Bar frame with 5 swivel legs, 2 large steel wheels and flat bar type 4m packer at back. Act Frame 3.8m. Solid Tool Good condition £2,300 % Shaun 07850 978188 C6474 COUSINS Subsoiler 2 leg heavy duty model with 8”x4” box frame 3.5m wide, rear large diameter flat bar steel crumbler barrel 3.25m wide on screw depth adjusters, steel 8” wide 24” dia depth wheels fit to front of frame. Adjustable legs with good feet (no wings) & front shins, one very good the other part worn Good condition £1,395 % Chris C 01926 338639 S7027 COUSINS Vee Form 3.25m Subsoiler c\w 5 adjustable legs, Flat bar crumbler and 2 steel wheels. Good condition £3,500 % Shaun 07850 978188 S6955 RANSOMES C 90 Toolbar fitted 3 Simba Pro lift legs on Swivels with good shins , points and wings, plus Hydraulically controlled solid tyred packer. Tidy paintwork Good condition £900 % Shaun 07850 978188 C6832 COUSINS ‘V’ Form heavy duty 5 leg mounted subsoiler, 2.25m wide with 8” x 4” box frame, winged feet on all good legs, rear flat bar crumbler roller on new screw adjuster control arms, 2’ diameter steel depth wheels fitted on front frame with all good screw adjusters Very Good condition £2,800 % Chris C 01926 338639

35

TANKS

S6826 1987 ACRITE PIPEWORK LPG Tank 1 ton ( 1700 litre) Skid mounted LPG tank C\w George Meller single phase pump and baynet nozzle and pipe with shelter. Good condition £900 % Shaun 07850 978188 C6308 DIESEL Bowser trailed unit with 400 litre plastic tank, recent high capacity electric pump to filter & hose fitted filling nozzle with auto cutout. Front carrier box for cans etc. Long drawbar with ball hitch, wide single axle fitted 145R10 tyres, lighting board. Pump has long cable & crocodile clips for use with 12v battery. Suit towing with Quad bike or pickup etc. Tank is not bunded. Good condition £425 % Chris C 01926 338639 C6959 DIESEL Bowser single axle towed by tractor, 500 gallon capacity round steel painted tank on chassis with twin screw jacks, top fill & 12 volt electric pump with hose & gun Good condition £425 % Chris C 01926 338639 S6795 CHAFER 2000 Litre Trailed single axle spray bowser. 7.50 - 16 tyres, road lights, PTO driven Comma filler pump, Usefull Chemical store box on the back. Good condition % Shaun 07850 978188 S6992 MEULLER 4000 Litre Stainless Steel Bulk milk tank. Cylindrical like road tanker on short legs . Not insulated Very Good condition £2,500 % Shaun 07850 978188 C6784 FUEL TANK Steel square type 1000 gallon capacity size 8’ x 5’ x 4’ with outlet hose & gun attached to lockable gate valve. Single skin non bunded used for one fill of white diesel only, some light surface rust on top panel requires paint recoating. Complete with strong steel stand 5’ high. Ideal second tank or for grain drier etc. Very Good condition £455 % Chris C 01926 338639 S6172 SCHNEIDER INDUSTRIES 1400 Litre LPG Tank, mounted on frame c\w single phase Smiths Electric pump with bayonet gun & pipe. Proper Rig Good condition £1,250 % Shaun 07850 978188 C6673 BUNDED Fuel Tanks pair lockable steel cabinets both free standing with lifting eyes fitted internal plastic diesel tanks. Western Trailers model in green paintwork capacity approx 500 gallons with no pump but internal platform for electric pump mounting, external size 8’6” x 4’9” x 4’6” high. Fuel Safe 500 model (500 gallon capacity) in yellow paintwork with hand pump, hose & nozzle, external size 8’ x 4’6” x 5’6” wide. Price each Good condition £850 % Chris C 01926 338639 S6727 Bunded Steel Fuel Bunker tank c\w own diesel pump. Actual stoarge tank 8 by 4 by 5 feet. Good condition % Shaun 07850 978188 S7169 MILD STEEL 14000 Litre Deisel tank, Appx 14ft by 8ft by 6ft tall, c\w 240v Output pump and flexible pipe with gun. Also Smaller mild steel tank 6ft by 4ft by 5ft tall c\w Flexible pipe & gun used for Road diesel Excellent condition Offers % Shaun 07850 978188


C6994 STAINLESS STEEL 17000 Litre artic tanker with towing dolly, MI Engineering part insulated round tank on York single axle chassis with air over hydraulic brakes fitted 11R22.5 twin wheels, baffled tank 30’ long & 6’ diameter with top fill access deck & rear camlock 2” outlet, currently used for water & liquid fertiliser, road going sytem with lights & fifth wheel coupling 10 stud round axle dolly fitted long tractor drawbar & 385/65R22.5 super single tyres with mudguards. Tidy unit Good condition £4,250 % Chris C 01926 338639 S7170 2004 HARLEQUIN 2700 ENV Bunded Fuel Station in plastic.C\w Top mounted 240V pump, pipe & nozzle. Just plugs into a 13 amp supply. Size 7ft by 6ft by 5ft 6” Good condition £800 % Shaun 07850 978188 C6943 WATER BOWSER made by Merrick Loggin, 1000 gallon capacity mild steel square sided construction, single 8 stud axle fitted 16.5R22.5 tyres & hyd brakes, ring hitch & shoe, side carrier boxes, top fill with front & rear discharge, road lights. Requires repair to base of tank Average condition £875 % Chris C 01926 338639

36

TRACTORS & EQUIPMENT

S7132 FORDSON Dexta 2wd Tractor repainted with new mudguards fitted. Pick up hich & linkage. 11- 28 tyres 50%. Good starter & Runner. Good condition £1,600 % Shaun 07850 978188 S7122 FLEXICOIL Front Linkage With single ram to fit Case MXU tractor.Simple type made for Flexicoil front press see Item S7123 available with this. Very Good condition £600 % Shaun 07850 978188 S6746 FORDSON Dexta 2wd tractor, 3 cylinder engine starts and runs well. Roll bar and draw bar (no lower Linkage fitted). 6-16 Landrover fronts 50%, 12.4, 11-36 rears 5%. PTO. & cover. Good condition % Shaun 07850 978188 S7149 1987 FORD 7610 11 Tractor, 4wd c\w loader in original condition, still on its first set of Goodyear 16.9 - 38 rear tyres and 14.9 - 24 fronts ! Trima 1192 loader with Joystick control.Very clean in the cab. Very Good condition % Shaun 07850 978188 C6935 MASSEY FERGUSON 390 4wd tractor, 1991 model with 5312 rec hours & Duncan Q cab, 8 speed gearbox plus reverse shuttle lever adjacent to steering wheel, telescopic pick-up hitch, 2 spool valves, 16.9R30 rear tyres 90% good tread, front 11.2R24 80% good tread. All very straight panelwork & good main paint, one of Coventry’s finest. Good condition poa % Chris C 01926 338639 S6995 FORD Bonnet RH side main section for 7810 Silver Jubilee Edition. Not perfect but quite usable with a little TLC. Good condition % Shaun 07850 978188 C6990 MASSEY FERGUSON

2725 Electronic 4wd 150hp tractor with Perkins 6 cylinder turbo engine, 1985 model low hours (approx 5000) very collectable or working machine. Michelin Bib X 20.8R38 rear & 16.9R28 front tyres all 50-60% good tread, 13 x 45kg front weights on extended frame, drawbar & pick-up hitch, 2 spool valves, aircon cab (needs regas), 540 & 1000 pto shafts in toolbox, all very original with straight panelwork & cab glass etc. Stored unused for 2 years but all running, Speedshift operative, requires brake work as pedal goes to floor & slight oil leak to front diff lock system Good condition £6,900 % Chris C 01926 338639 S7150 2007 CASE IH

MXU 135 Pro 4 wd Tractor with multicontrol armrest, 50K gearbox, Air brakes & seat. Michelin 650/65 R38 70% and 540/65 R28 fronts 70% 2981 hours. 2 Spools & pick up hitch.Optional Quicke Q 950 loader. Very Good condition £28,000 % Shaun 07850 978188 S5770 1994 CASE INTERNATIONAL 5140 Maxxum 4 wd Tractor, Pick up hitch, 2 spools, recent dealer back end ovderhaul inc handbrake. 8500 hours. 460/85 R38 20% 16.9 - 24 fronts. Tidy Good condition £9,500 % Shaun 07850 978188 C6894 HEVA Front Weight carrier frame to fit front linkage, c/w bolted in cast frame bolster fitted 10 x 45kg McCormick tractor weights on 6” deep frame lip, back frame hole matrix allows alternative manufacturers weight carriers to be fitted, fully adaptable with de-mount stands, all in very good red paintwork. Also CLAAS 600kg cast front weight block to fit 3 point linkage, compact profiled design in shiny enamelled grey livery part number 081018118, front tow pin hole, suitable to have bracket fitted to double up second weight - this one priced at £825 Very Good condition £1,095 % Chris C 01926 338639 C6979 JCB FASTRAC 155-65 1994 model with Perkins 150hp engine, 4wd 2ws & 50 mph road speed with twin button ratio shift on 6 speed gear lever, 6260 genuine hours, 540/65R30 tyres with variable tread 15 to 10% good on 10 stud axles, front & rear fenders, all cab glass intact, aircon needs regas, good straight model done very little work in last few years and been very comfortable & reliable. Available at extra cost with modified Atlas Crane fitted to rear linkage, long reach model 3008 with adj stabiliser legs & piped for grab, external seat & controls, capacity 1380 kgs lift at 5.07m reach (220 bar pressure) - priced at £1795 Good condition £10,995 % Chris C 01926 338639 S6858 MF Weight Set 10 Front end weights suit MF 2000 series tractor with lower retention bolt. Good condition £350 % Shaun 07850 978188

JUNE 2014 39

• See also the wanted section and read the buying/selling details before calling

WWW.WRIGHTSREGISTER.COM

S7171 JOHN DEERE Front PTO Shaft driven to suit John Deere 6900 tractor. Removed ready to go Good condition TBA % Shaun 07850 978188 S7090 2013 JOHN DEERE 5055E 4wd Tractor with ROPS only for indoor low building work. Only 440 hours. 380/85 Rears 80%, 320/85 R20 fronts with fenders.1spool Linkage & drawbar. Mechanical gearbox. Very Good condition % Shaun 07850 978188 C6681 STANDEN Front Linkage simple type fits to front of tractor to operate Standen Hoe, single ram lift, yellow paintwork, last used on Case tractor, could be adapted for other applications like a snow plough Good condition Offers % Chris C 01926 338639 S7113 1998 EASTERBY ET 8 Monocoque 8 ton trailer c\w Hydraulic back door, Tandem axle on 12.5/80 - 15.3 tyres with hydraulic brakes. Very Good condition % Shaun 07850 978188 S7129 1995 CASE INTERNATIONAL 5130 Powershift Plus 4 wd tractor c\w Front linkage, 3 spools and pick up hitch. 520/70 R38 rears 70% good and 480/20 R24 fronts 50%. LHR. Reasonable cab Average condition £7,000 % Shaun 07850 978188 S6092 2006 NEW HOLLAND TC 27 4wd Diesel Compact tractor on Good Turf Tyres ,Appx 2000 hours. Comes with full road lighting. Front weights, wafer or Jerry can, 2 Spools & Folding Rollbar. Very capable worker for its size, suit scraping, mowing or just for the kids. Very Good condition £5,250 % Shaun 07850 978188 F3541 NEW HOLLAND 8630 4WD 130HP (1997) 7700 recorded hours. Tyres; Rear 50%, Front 40% 4 spools, PUH, “Rangecommand” gearbox. 540/1000PTO & “E” settings. Aircon. Good working tractor, well maintained and ready to go. Set of front weights to fit priced seperately £850 Good condition £13,500 % 07503 531889 S6714 INTERNATIONAL 275 Hi Clear 2 wd tractor, 12 - 38 rears 60%. Restored in recent years back and used for light grassland work. Genuine sound tractor with excellent engine and lighting kit. Very Good condition £3,500 % Shaun 07850 978188 S6793 1991 FORD 4000 Industrial 2 wd tractor c\w Heavy duty front axle , new seat, Sound mudguards, no cab 5700 hours. 50 % 480/70 R28 Rears. 50% 10.75 - 15.3 rears. Drawbar only (optional extra back end). Good condition £1,700 % Shaun 07850 978188 S7200 1981 FORD FW 60 4 Wd Articulated tractor on 30.5 - 32 tyres 70%. Fitted Linkage Frame, drawbar & 4 spools. V8 Cummins 903 Engine 8837 hours, 10 speed Spicer manual gearbox with overdrive. Straight original tractor. Good condition £12,500 % Shaun 07850 978188 S7091 MF 30E 2 Whhel drive industrial 135 tractor with power shuttle gearbox and sound powe loader with 4ft bucket. 70% 14.9 - 28 rears & 60 % 7 - 16 fronts. Sound cab lacks door. Good condition % Shaun 07850 978188 S7093 CLAAS Xerion 3800 Trac VC Reverse Drive 380 HP 4wd tractor with 50K Vario transmission. Air Brakes Front and rear linkage. 4 spools to both. Trelleborg 65/85 R38 tyres almost unmarked. Full Digital climate control. Only 1731 hours Excellent condition £100,000 % Shaun 07850 978188 S7142 FORDSON Tractor Drawbar For Old Fordson % Shaun 07850 978188 S7130 CASE CVX 160 4wd Tractor with front Linkage & PTO, Fully vario 50K transmission with air & Hydraulic brakes. 600/65 R38 rears 90% Good 540/65 R26 fronts. 4 spools, Pick up hitch. Cab & front axle suspension, Air conditioning, Air seat, electric Mirrors. Good condition £27,000 % Shaun 07850 978188

37

TRAILERS

C6789 SPECIALIST Box type trailers Engineer made with rear loading ramps & unused. Single axle model 2.5m long, 1.6m wide & 2m high, ball hitch & brakes, 17513 tyres + spare, painted cream & gold, stabiliser legs, jockey wheel, mudguards, Avonride suspension, twin side doors open up as loading ramps. Suit ATV transport or Mobility equipment in fully enclosed environment. Similar twin axle model without side ramps, streamlined curved frontage, front locker box over drawbar fitted Robin EY20 petrol engined single phase electric generator built on Snipe chassis, twin spare wheels.- this model priced at £1350. Both all very strongly built, please call for more info & photos Very Good condition £995 % Chris C 01926 338639 S5942 WESTFIELD 20 Ton 30 Cubic Meter capacity hi-speed tipping trailer,Built On Refurbished Skelly trailer on Tandem Sprung axles, Refurbed Hyd brakes, 385/65R 22.5 Tyres on 10 stud rims.Monocoque tipping body, reinforced 10mm floor and tapered sides, 4mm to the top, built and painted in epoxy , underfloor multi stage ram cylinder,Tips to 52°. Slide tilt Hydraulic full tailgate door. Sprung drawbar on phosphor bronze bushed pin. New lights wiring and hoses, Road lighting. Excellent condition £15,600 % Shaun 07850 978188 S5982 2000 KING Skeleton Trailer 28FT long, tandem axle, Air suspension, Air brakes, twin 215/75 R17.5 tyres. 16 Ton Gross carry appx 13 ton. Make very good bale trailer or low loader Very Good condition £1,400 % Shaun 07850 978188 S7220 WEIGHTMAN 30FT Flat Commercial Artic trailer. Tandem Steel sprung axles with Super singles all round ing very good dolly up front. Hydraulic brakes & mudguards. Floor average Good condition £1,200 % Shaun 07850 978188 S7023 WEEKS Hi Tip 4 Ton Steel Dropside trailer on good 5 stud wheels with10 15.3 tyres. 10 ft 10” long body by 6ft 3” with 18” plus 18” sides. Also Standard 4 Ton Monocoque bodied steel trailer with 10ft by 80” by 43” body. Good condition % Shaun 07850 978188 C6774 BIG K 4 Wheel Drawbar turntable type 11 tonne tipping trailer, bolted dropsides & manual tailgate, size 18’ long, 7’ wide with 3’6” high sides, front axle fitted15.0/70-18 tyres, rear axle 385 size super singles both 6 stud fitting, hydraulic brakes, road lights, painted blue, tapered potato back section if required, sides have some rust areas so may need refurb but currently grain tight. Useful trailer to use as bulk or flatbed - rear extension could easily be fitted for bale transport. Similar 12 tonne version 22’ long with slightly lower sides (part side has 2’ removable section) again can be used as bulk or flatbed - this model priced at £3000 Good condition £3,395 % Chris C 01926 338639

S7172 2005 EASTERBY ET 4 Monocoque single axle trailer with barn type back doors. Good Vredestein 10/75 R 15.3 tyres. Fitted Hydraulic Brakes, Handbrake & Lights. Little used & well maintained. Good condition £1,350 % Shaun 07850 978188 S7230 INDISPENSION 16 By 8 3 Ton Tandem axle trailer with wheels under chequerplate floor. Strong trailer Good condition £1,375 % Shaun 07850 978188 S6154 Box Type Trailer Single Axle Lorry convertion interanlly 2.4m By 5m by 1.9m High. Roller door on back, sliding doors along sides. Hydraulic brakes on single sprung axle with 10 - 20 twins. Handy for seed, shoot or storage. Very Good condition £700 % Shaun 07850 978188 S6918 PETTIT 6 Ton Single axle Double dropside trailer on Good 12.5/80 -15.3 tyres. Ply lined body (To rape proof)13ft by 6ft 6” by 3ft 6”. Nice paintwork Brakes & Lights Very Good condition £1,800 % Shaun 07850 978188 C6857 HENTON 10 Tonne Mono twin axle trailer, repainted blue & recent new brake shoes, hydraulic back door with large grain chute fitted wind up gate, body size 4.8m long 1.2m high & tapered body 2m to 2.3m wide, leaf springs, good Michelin XP27 335/65R18 tyres on 6 stud axles, front ladder, good ring hitch & drawbar shoe, road lights Good condition £3,295 % Chris C 01926 338639 C6980 HOOK LOADER Trailer Chassis Tri Axle heavy duty model to take 20’ long skips/bodies, commercial axles with air brakes (only) fitted as new 435/50R16.5 tyres, steel single flat type Leyland 45 road springs give low loading height of 47”, tractor drawn drawbar with ring hitch & shoe, hydraulic operated hook system, load capacity suitable for small excavators etc. if required. Very Good condition £8,995 % Chris C 01926 338639 S7050 IFOR WILLIAMS GD 85 General Duty Trailer, Tandem axle, 165 R13 wheels to the side, with part mesh rear ramp door. Spare wheel unused. 2700kgs MGW. Galvanised body 2.5m by 1.58m Very Good condition £1,250 % Shaun 07850 978188 S6527 JONES 25ft Bale / plant Trailer 8ft wide tandem tilting trailer for plant or bales up to 10 ton. 11.5 / 80 - 15.3 tyres. Very clever multiprurpose trailer Very Good condition £5,000 % Shaun 07850 978188 S7131 TRIFFITT 10/11 Monocoque C\w Sprung drawbar and Hydraulic Back door with grain chute. Tandem sprung axles with good 345/65 R18 tyres. Body 17 ft by 7ft 3” by 4ft . 1 Small farmer owner who has kept the trailer inside. Very Good condition £4,750 % Shaun 07850 978188 S6868 CHALLENGER Plant trailer Tanden Axle Galvanised with Fixed 12” sides & Mesh type ramp rear door. 175 - 13 tyres on the sides Good condition £1,500 % Shaun 07850 978188 S6749 SHOOT Bus Converted Single axle lorry body converted into shoot bus / trailer by Fittting side centre door seats for 20 plus tables and overhead racking. Roller and drop down door at the back.mLights No brakes. (Pull with tractor) Good condition £2,250 % Shaun 07850 978188 C6942 SILAGE SIDES to fit AS ACE 12 tonne mono trailer, blue painted front or side load system, self opening rear mesh tailgate, size 19’ long 7’/7’6” wide (fit tapered trailer) & 3’6” high plus 1’ extension, top lifting eyes for easy attachment Good condition £995 % Chris C 01926 338639 C6862 BALE Trailer 4 wheel drawbar turntable type 22’9” long & 7’2” wide, twin wheels on front axle 6.50-16 & twin rears fitted 8.5-17.5 tyres, front & rear short steel hay ladders, low loading height, no suspension, floor ready for re boarding Average condition £495 % Chris C 01926 338639 S6027 ARMSTRONG AND HOLMES Flat 21 Ft Trailer, tandem axles 6stud walking beam with 10.5 - 18 michelin Pilote tyres. Fitted lift off Potato Bulker bodie with narrow bottom belt unloader, 3 phase motor driven. Ply over steel frame with boards, Or Just the Flat trailer Good condition £3,500 % Shaun 07850 978188 S7105 PETTIT High Tip 8 Ton Tanden Axle trailer ( s ) with Doulble galvanised steel dropsides 13ft by 6’6” taper appx 3ft 6” tall. Steel floor. 12 by 18 tyres Average condition % Shaun 07850 978188 S7107 Shoot Cart Single axle Beaters trailer on Super single tyres. Bench seats round the outside. Rear Door and step to access. Extended tractor drawbar with box over. Average condition % Shaun 07850 978188 S7114 TYE 3 Ton Single axle timber dropside trailer on 7.50 -16 tyres, 5 stud axles. Quite solid for age Good condition % Shaun 07850 978188 C6998 HAYFLAKE Drop Flat transport drive over type trailer, heavy duty model with mechanical operating system, chassis base fitted 11.5/80-15 tyres, timber boarded body 20’ long & 6’3” wide, ring hitch, wheel chocks, all in working order, ideal drill/power harrow/implement carrier Good condition £1,150 % Chris C 01926 338639 S7160 Beaver Tail. 12ft Bed plus 5ft Hydraulic Tilt Bed Plant trailer. Chequerplate floor 6ft 6” wide. 185/70 R 13 tyres.Very well built Good condition £2,600 % Shaun 07850 978188 C7005 BALE TRAILERS Selection including single axle drawbar type with front ladders & ply floors 8’ wide, 22’6” long model fitted 11R22.5 twin wheels, 21’ model fitted 7.50-20 twin wheels, ring hitches & road lights. Twin axle 23’ long trailer fitted 7.5016 tyres & short beaver tail end section + flat floor adaptor 6’10” wide. Also 4 wheel type with 5th wheel coupling towing dolly, 25’6” long & 7’3” wide, 13.00/55-16 front tyres & 14.5/80-18 rears, 46” loading height requires new floor Good condition poa % Chris C 01926 338639 S7159 WESSEX 16Ft Vehicle trailer with 14” galvanised sides appx 6ft 6” wide. 195/80 R13 tyres. Heavy duty jack Good condition £1,600 % Shaun 07850 978188 S7161 Dump Trailer Single Axle on 16.9 24 tyres with 50% tread, hydraulic brakes.Tapered bidy holds appx 12 ton of heavy rubble. Average condition £2,250 % Shaun 07850 978188 S6847 1996 RICHARD WESTERN 12 ton Tandem Axle Monocoque trailer, Sprung 8 stud axles with very good 386/65 R22.5 tyres. Standard back door with grain chute. Blue paintwork and front ladder.Very Straight Very Good condition £7,000 % Shaun 07850 978188 S7106 PETTIT 3 Ton Timber dropside trailer. Single or double timber sides Timber floor. Body 10ft by 6 ft. 7.50 - 16 tyres on 5 stud axles. Choice in mixed condition. Average condition % Shaun 07850 978188 S7218 2010 AGRIMAC 6 Ton Dropside steel Single axle trailer. Body 12ft by 6ft by 20” sides. 12.5/80 - 15.3 Vredestein tyres and rims as new. Hydraulic brakes, tipping, Handbrake & road lights. Very Good condition % Shaun 07850 978188

S7135 Lincolnshire Harvest Four wheel Wagon,horse drawn. Fitted Timber extensions to take sheaves and roping hooks for load securing ropes.Very Sound with good shafts Good condition £1,500 % Shaun 07850 978188 S7124 AS 10 Ton Monocoque Tandem Sprung axle trailer in blue with red easy sheet.Front Ladder and Standard rear door with grain chute, Brakes & lights. Original 12.5/80 - 15.3 tyres with 60% tread. Very Good condition £5,250 % Shaun 07850 978188 C6983 DROP FLAT Transport Trailer tractor drawn type with 8” deep steel channel section chassis construction, thick timber floor planks, size 10’ long & 7’9” wide, rear pivoting box subframe with twin hydraulic ram activation & single axle fitted twin wheels & 7.50-16 tyres, brakes in hubs but not connected, long box section drawbar, will carry 8 tonne excavator etc. Good condition £1,400 % Chris C 01926 338639 C6982 ARTIC Bale Trailer twin axle 31’6” long including small extension, timber boarded floor on strong ex army chassis, walking beam spring suspension, air brakes, 10 stud axles fitted twin wheels & 11.00-20 all good tyres with spare, rope boxes, road lights. Carries 4 x Quadrant size big bales long x 4 high (32 in total). Coupled to towing dolly with wheels at rear of bogie chassis (makes manouevreing easier), single axle with tractor drawbar & ring hitch plus shoe Very Good condition £2,700 % Chris C 01926 338639 C6888 BATESON 45HB Cattle Trailer, 10’ long with chequer plate floor & recent new ramp timber top, 1991 model with all good 6.00-16 tyres on twin axles outside body, top ramp bar, timber loading gates, inspection door, 50mm ball hitch & overun brakes, lights, some small damage to roof front corner & one rubber mudguard. NO sheep decks -cattle spec only. Average condition £975 % Chris C 01926 338639 C6773 BIG K Monocoque 12 tonne twin axle tipping trailer size 18’ long x 8’ wide x 4’ high sides, leaf spring suspension, super single 385 size tyres on 8 stud fitting, hydraulic brakes, manual tailgate with grain chute, ring hitch & drawbar shoe, front ladder, road lights, very strong & straight trailer painted green of a generous size. Ideal grain & muck trailer Good condition £3,995 % Chris C 01926 338639

38

WHEELS/ TYRES DUAL/ROWCROP

F3451 COLCHESTER TILLAGE 8.3/80R36 Row Crop wheels complete with pans to fit MF135 or similar. 80% tread. Good condition poa % 07503 531889 C6991 SET ROWCROP Wheels & Tyres sizes 13.6R48 & 11.2R36 (270/95R36) to fit JD 6930 or Fendt 4wd tractors etc. Alliance A350 A8 tyres all 80% good tread on track adjustable wheels (bolted rims to centres), rear 8 stud fitting 275mm pcd with 220mm centre hole, front 10 stud 330mm (13”) pcd & 280mm (11”) centre hole diameter. Good modern strong set for big tractor Very Good condition £1,695 % Chris C 01926 338639 C6534 KLEBER Radial pair 480/65R28 tyres on wheels ex Sanderson forklift, radial tyres with good 10% tread, white painted 8 stud wheels with 8” pcd & 5.5” centre hole (large chamfered hole fit Ford tractor etc), welded centres non adjustable wheels Good condition £475 % Chris C 01926 338639 S5997 GOODYEAR 600/65 R28 DT 820 Tyres, treads appx 30%, Sound order Suit tractor front or sprayer Good condition % Shaun 07850 978188 S7229 KLEBER 300/95 R52 Rocrop tyres & Rims for rear of JD 6820 and Fronts to match 270/95 R36 Very Good condition £4,250 % Shaun 07850 978188 S5866 11.2 - R48 Rocrops with 70% Bibagrip tyres, 8 stud centres Ex Case Maxxum, plus 9.5 - 32 fronts 8 Stud adjustable centres. Both 220 hole 275 pcd Good condition £1,600 % Shaun 07850 978188 S7082 TRELLEBORG Twin 423 Tyres 700/50 - 26.5 Vurtually as new, tyres only. Very Good condition % Shaun 07850 978188 C7008 GOODYEAR 30.5L-32 pair Dyna Torque tyres fitted to white painted wheels with swop centre plates, 8 stud 275mm pcd fitting (wheels last fitted to Ford/NH stub axle type tractor), tyres ex Combine with some sidewall outer skin splits so suit lighter weight application, good tread depth - tyre fitter stated tyre carcase on both all sound Average condition £850 % Chris C 01926 338639 C6767 ROW CROP Set Wheels ex Case tractor, rear size 230/95R44 (9.5R44) Alliance tyres with 85% good tread, silver painted adjustable track Sam Moreton wheels with 8 stud 8” pcd fitting (will also fit MF, JD, DB, Leyland etc rear axles). Front 8.3/8R32 Kleber 40% tyres on yellow wheels with 8 stud 275mm pcd fitting Good condition £895 % Chris C 01926 338639 S6019 MICHELIN 9.5 - 48 Rocrop tyres, 6 ply on HDR type rims with pans, 280mm hole 8 stud 250mm hole. Also Pair of Kleber 9.5 - 48 rocrops 60% tread on HD rims with Pans 8 stud 8” 5.5” hole Ford Etc. Average condition % Shaun 07850 978188 S6326 TAURUS 270/95 R48 4 Star Rocrops On HD rims and centres to Fit MB trac (8 stud, 275mm PCD & 220 hole) Tyres all 85% good Set of 4 Very Good condition £1,300 % Shaun 07850 978188 S6252 HEAVY DUTY 270 / 95 R48 Rocrop wheels c\w New tyres. Also inc HD Standen type rims & centres (8 stud 275 mm PCD & 220mm holes Good condition £975 % Shaun 07850 978188 C6955 STOCKS Set dual wheels for 4wd tractor, steel rims only (no tyres fitted) with full set clamps, black painted type to take 18.4-38 & 14.9-28 tyres sizes, will need some de-rusting & paintwork Average condition £400 % Chris C 01926 338639 C6928 DUNLOP 28L-26 pair tyres with all good deep tread fitted to wheels with 8 stud 8” (205mm) pcd & 6” centre hole fitting. Chevron traditional traction lug pattern 16 ply rating tube type. Last used on JD2650 tractor but will fit other models (replace 16.9R38) Good condition £895 % Chris C 01926 338639 S6759 D AND S 12.4 R46 Rocrops To Suit MF 6150 (Adjustable track to 62”) Fitted Alliance A 350 tyres 4 star. 95% Centres have 6” hole 8” PCD Plus fronts 11.2 R 32, Alliance tyres 3* Bolt in centres 220 hole 275 PCD Excellent condition £2,000 % Shaun 07850 978188

C5824 ALLIANCE Pair 600/60R30.5 flotation tyres 331 tread pattern traction type A8 12 ply with good tread, some small surface cuts but all sound carcass, rolling circumference when new 4340mm Good condition £450 % Chris C 01926 338639 S7192 PIRELLI 7.5/7 - 36 Tyres Almost new on Frazer Agribuggy Rims & centres. Set Of 4. Very Good condition £650 % Shaun 07850 978188 S7095 GOODYEAR 66 - 43 - 25 Terra 2 pairs of 50% tyres on 8 stud rims with adaptor plates, 6 Ply. Also 1 pair of alliance 328 600/55 R 26.5 Fronts 80% on 10 stud 330PCD, 280 hole rims, and 1 pair of 500/60 26.5 8 stud 330 PCD 290 hole (60%) Good condition % Shaun 07850 978188 C6912 GOODYEAR 48x25.00-20 Terra tyres on wheels ex Bateman sprayer, quantity 6 all 6ply rating, 3 have wheel fitting 8 stud 275mm pocd & 220mm centre hole, other 3 are 6stud 205mm pcd & 160mm centre hole, tread varies with some uneven wear. Also pair Michelin 9.5R48 row crop tyres on 6 stud Ford fitting, tread 50% good, last used on $600 tractor Good condition poa % Chris C 01926 338639 C6348 NISSAN Terrano set 4 alloy wheels & tyres plus steel spare wheel & tyre, General Grabber AT2 tyres size 235/70R16 one as new plus 4 x approx 70% good tread, all ex Commercial Terrano model 4x4 vehicle, worth the cost in tyres alone Good condition Offers % Chris C 01926 338639 C6586 TERRA TYRES Pair 48x25.0020NHS Goodyears on 8 stud wheels with 275mm pcd, good tread but some slight surface cracking (last used on an MB Trac 1000).This size will also fit other applications (tractors, sprayers etc.). Also set four Continental 9.5-42 row crop tyres (3 x 85% good tread & 1 x 20%) all on welded centre to rim wheels same fitting as above (suit 72” track setting), 10 ply tube type. Set 4 priced at £1195 Good condition £600 % Chris C 01926 338639 C6755 PIRELLI 16.9R34 (420/85R34) TM600 pair tyres - as new with markings still visible on tread bars, fitted on heavy duty dual wheels with 4 clamps per wheel, round bar clamping rail. Quality radial tyres as new hard to find set, ideal as just a pair of tyres at this price Very Good condition £895 % Chris C 01926 338639 C6809 ROWCROP WHEELS Set front & rear heavy duty type made by Sam Moretons tyres, rear size 9.5R44 Alliance on 8 stud fitting 205mm pcd with 140mm centre hole, front 8.3R32 Vredestein 8 stud 6” (150mm) pcd & 105mm centre hole, all tyres 90% good tread. Suit Lambourghini, SAME & other tractors Very Good condition £1,195 % Chris C 01926 338639 C6133 GOODYEAR Wrangler 31.0015.50-15LT tyres ex Wilmot Lightfoot ‘buggy’ sprayer on 4 stud wheels (for Ford axles), multiple chevron type good tread, quantity 4 to be sold as one lot Good condition £365 % Chris C 01926 338639 C6756 JOHN DEERE pair yellow painted complete wheels ex 2850 tractor size 1238 suit tyre size 13.6-38 with 8 stud 8” pcd fitting (no tyres fitted) Very Good condition £225 % Chris C 01926 338639 C7004 FIRESTONE 24.5-32 All traction field & road wide tyres fitted on pair yellow painted rims with swop centre plates, sound tyres (ex Combine type) with 15%+ good tread, 8 stud fitting with 8” pcd & 6” centre hole Good condition £395 % Chris C 01926 338639 C6722 SET 4 Wheels & Tyres ex self propelled sprayer with 8 stud 275mm pcd fitting, tyre size 600/65R28 tubeless - pair Goodyear with 20% tread & pair Michelin XM with approx 10% all sound, white painted rims with 300mm outer & 200mm inner offsets. Also set of four 48x25.00-20 6ply tyres on wheels with same fitting (8 stud 275mm pcd) &350mm offset - consisting of pair Firestone Flotation 23 & pair Goodyear Terratire all 25-30% good tread on white painted rims Good condition poa % Chris C 01926 338639 C6632 COMBINE Size set crossply tyres suit Claas/MF etc. Size 23.1/18-26 set of four all good tread but a little aged currently on 8 stud wheels ex wheeled excavator (rubber duck) but ideal as a spare or kit your machine out with a pair of better tyres. 8 ply tyres pair Dunlop & one each Goodyear & Powermark, 8” pcd fitting with 5.5” centrehole, offsets 7” & 14” centre to rim edge Good condition Offers % Chris C 01926 338639 S7186 TRELLEBORG Twin 404 850/50 38 Floatation rear tyres on rims with Bolt in centre plates . 90 % tread plus Matching fronts on rims with bolt in centres and 90% tyres Very Good condition % Shaun 07850 978188 C6808 FLOTATION Pair rear tractor tyres size 66x43.00-25, Firestone 23 tubeless pattern on rims with twin flanges for bolted in swop plates (suit tractors or combines), 60% + good tread on both tyres, 2 sets of centre plates - 8 stud 8”pcd with a 6” centre hole (JD/MF/Case etc. fitting) & 8 stud 205mm pcd with 140mm centre hole Very Good condition £1,125 % Chris C 01926 338639 S6593 STOCKS 15 - 34 Dual wheel rims , pair of in Black . Tyres perished Good condition % Shaun 07850 978188 C6863 TYRES & Dual Wheels Pair black painted (probably Stocks) dual wheels fitted 16.9R34 Michelin Bibagrip3 tyres, 6 ply with 25-30% good tread, rims can have centres bolted in, will require clamps for duals. Pair Goodyear radial tyres 16.9R38 suitable for duals. Pair rowcrop wheels ex front axle on Same tractor, Standen 8 stud, 6” (150mm)pcd & 110mm centre hole fitted 9.5R36 tyres all sound. Vredestein 700/4522.5 tyre 12 ply ex big baler or similar, vulcanised repaired & new tube, all good tread Good condition poa % Chris C 01926 338639 C6507 NARROW Tyres & wheels for row crop work, pair Kleber 9.5-44 tyres on rims to fit 8 stud 8” pcd fitting (ex MF but will fit Case/DB, JD etc.), good tyres but rims may require some repair. Vredestein 8.3-32 tyre with good sound tread. Pair complete wheel rims & centres (no tyres) to fit front axle of John Deere 4wd (2850 model etc) suit fitment of 9.5R32 or 8.3-32 tyres. Good condition % Chris C 01926 338639 S6571 MB TRAC wheels Chioice of 16.9 24 Tyres 7 MB trac rims and detacheable centres Varoius amounts if tread Good condition % Shaun 07850 978188 S6926 9.4 - 44 Rocrops C\w 8 Stus Centres plus pair of 9.5 - 32 fronts with 70% tyres . 220 Hole , 275mm PCD Good condition % Shaun 07850 978188 S6647 BETTINSON 12 - 38 Duals fitted 13.6 - 38 Tyres, 2 sets one with 60% Goodyears, the other with imports. Good condition % Shaun 07850 978188 S6609 STOCKS 15 - 38 Steel Dual wheel rims and spacers ( No tyres) Good condition % Shaun 07850 978188

C6713 GOODYEAR Crossply pair tyres size 18.4-30 ex trailed sprayer on 8 stud wheels with 275mm pcd Average condition £325 % Chris C 01926 338639 S5831 STANDEN 11.2 R 48 rocrops C\w 40% tyres & Bolt in Ford 8 stud centres. Also Set Of HDR Rims with 11.2 - 48Tyres & square Ford Pans Plus f Terry Johnson dualling kit to mount 2 pairs of Rocrops on each axle. Good condition % Shaun 07850 978188 S6925 TERRY JOHNSON 18.4 - 38 Duals c\w 60% Pirrelli tyres & clamps. Spacers appx 10” Good condition £425 % Shaun 07850 978188 C6895 BIG RUSSIAN Pair tyres size 28.126 with all good tread on wheels with bolt in swop centres, centre plate size 8 stud 8” pcd & 6” centre hole, painted yellow last used on JD 3000 series tractor but will fit other makes. Have lived outside but all sound done little work Good condition £825 % Chris C 01926 338639 S7071 MITAS 380/85 R28 (14.9 - 28) tyres (tractor fronts) 2 Tyres almost as new, hardly used fitted by mistake. (No tubes) Excellent condition £500 the pair % Shaun 07850 978188 S6236 FOSSITT AND THORNE Heavy Duty Rocrop wheels, 1 pair of 8.3 - 44 s with 70 % Bibagrip tyres have 8 very strong 3 hole lugs 32” PCD. Also Pair of 9.5 - 48 Rocrops Also 8 stud 32” PCD. Plus Pair of Ford Pans 8” PCD big hole with 5.5” centre Good condition £250 pair % Shaun 07850 978188 S5187 GKN 11.2 R48 Rocrops , Alliance Tyres with JD 8 Stud HD centres plus Fronts 11.2 R32 Alliance , same PCD Fit JD 6400 - 6620 . Good condition £1,200 % Shaun 07850 978188 C5766 SET Rowcrop wheels for a JD 2850 4wd tractor with 12.4R32 fronts & 11.2R48 rears, Barum & Michelin tyres all tyres OK with between 10 & 20% tread, will fit other models Good condition £500 % Chris C 01926 338639

39

VEGETABLE EQUIPMENT

S5247 INVICTA Vibrating table on Long legs, Screen 750mm by 2m 20mm pitch rods. 960 watt motor. Tidy unit Took out ready to go Good condition % Shaun 07850 978188 C6835 FEDELE Module Planter tractor linkage mounted 4 head/4 row unit, includes frame & operator protection canopy, individual FAST rotary heads with sprocket drive from rubber drive wheel provides infinite spacing options plus large diameter press wheels, tray carrier system adjacent to operator position seated 2 forward & 2 rear, 2009 model used on black fen soil Very Good condition £6,450 % Chris C 01926 338639 F3434 NICHOLSON Fan Bladed Onion Toppers 2 x 10t/hr Onion Toppers that can be run in parallel or individually, complete with 1.5m wide rubber belt feed elevator. All motors 3 phase. Please call for details. poa % 07503 531889

40

VEHICLES/LGPV

C6866 IFOR WILLIAMS Pick-Up top to fit Nissan Navara double cab (crew cab) 2005 model pick-up, Ifor Williams code V419 NAV CC, all galvanised steel with mesh screen guard & mesh tail gate, little used new in 2005 but looks as new (dry stored). Exact dimensions available on request Very Good condition £100 % Chris C 01926 338639 S7061 2006 MULTICAR

Tremo Carrier S 4wd, 4ws Multipurpose vehicle with universal hydraulics inc front linkage, VW 1898cc diesel engine, Aircond cab with heated windscreen & mirrors, only 2331 hours. Can be sold with Fielder FFA 400P Front mounted flail mower, 2m Snow plough and 1500 litre tank with weed sprayer / washer unit Very Good condition £40,000 % Shaun 07850 978188 F3537 KAWASAKI 220 Farm use only, not road registered. Inquire for details. poa % 07503 531889 C7013 KAWASAKI KVF360 4wd Quad bike, 2007 model with full road kit & registration number, green livery with all good seat & very straight panelwork, front & rear racks, ball hitch & 7 pin socket, auto select gearbox with low/high/reverse lever, 360cc petrol engine showing 4146 miles/kph? Front tyres getting worn, rears good, little used bike on mainly arable work Very Good condition £2,875 % Chris C 01926 338639

Wrights Broker Service the safe and reliable way to buy and sell machinery and equipment View the broker service online at

www.wrightsregister.com


40 JUNE 2014

WWW.WRIGHTSREGISTER.COM

BEDEC ACRYLIC EXTERIOR

BARN PAINT THE SAFE ALTERNATIVE TO TAR VARNISH, BITUMEN AND CREOSOTE • • • •

EASY TO APPLY EXCELLENT COLOUR RETENTION MULTI-SURFACE APPLICATION FLEXIBLE - NO CRACKING OR FLAKING • LONG LASTING FINISH AVAILABLE NATIONWIDE THROUGH TRAVIS PERKINS, RIDGEONS, BREWER & SONS, BROMBOROUGH PAINTS, ERNEST DOE & DULUX DECORATOR CENTRES

TEL 01279 876 657 FAX: 01279 876 008 www.bedec.co.uk email: sales@bedec.co.uk


FARMING

JUNE 2014

£1.50

REGISTER

1

p1

or AutoPowr transmissions across the whole model range, as well as a CommandQuad transmission on the two smallest models. AutoPowr’s ‘pedal mode’ enables the operator to change the ground speed while operating pto-driven equipment that demands constant engine rpm. Continued on page 21

p 2 0-2 1

Join the stone age

new tractors, the other five producing between 210hp and 290hp. For transport and pto applications, the engine’s intelligent power management (IPM) system provides an extra 30hp and is expected to deliver 2% better fuel efficiency than previous units. Later this year there will be a choice of e23

Fully automatic for the people

See page 7

All systems are go for Midlands Machinery Show

BRITAIN’S BEST FOR TRACTORS, MACHINERY AND EQUIPMENT

Awe and envy See – Evoque pages reviewed 14-15

MORE power and greater comfort are promised by the new John Deere 7310R tractor – set to make its European debut this month. The 7310R comes with fully automatic e23 transmission as an option and produces 310hp at rated engine speed. It will sit at the top of a six-strong range of

p6

Gold for New Holland YFC in a tight spot

TEL 01279 876 657 FAX: 01279 876 008 www.bedec.co.uk email: sales@bedec.co.uk

AVAILABLE NATIONWIDE THROUGH TRAVIS PERKINS, RIDGEONS, BREWER & SONS, BROMBOROUGH PAINTS, ERNEST DOE & DULUX DECORATOR CENTRES

• EASY TO APPLY • EXCELLENT COLOUR RETENTION • MULTI-SURFACE APPLICATION • FLEXIBLE - NO CRACKING OR FLAKING • LONG LASTING FINISH

THE SAFE ALTERNATIVE TO TAR VARNISH, BITUMEN AND CREOSOTE

BARN PAINT

ACRYLIC EXTERIOR

BEDEC


Wrights Farming Register - June 2014 - Full Edition