Wrights Farming Register - April 2014 - Full Edition

APRIL 2014

Farming

register

Britain’s Best FOr tractOrs, machinery and equipment

See JCB gets wet page Is Fiat’s new 4x4 all fair 8 feet and square? See pages 16-17

The outside track A POWERFUL range of tracked tractors to rival Case IH’s awesome Quadtrac has been launched in the UK. JPM Agricultural, based at Authorpe, near Louth in Lincolnshire, has the exclusive import rights to Canadianmade Versatile Deltatracks.

The DeltaTrack is available in three versions – the 450DT,

500DT and 550DT, with the 550DT being roughly equivalent to the STX600.

JPM managing director James Hunt said: “The DeltaTrack is designed to do the same job as the Quadtrac and its track size is the same but the two machines have no components in common. The DeltaTrack has the biggest cab

the all new

Vacuum Bracket

■ Simple & quick fixing for modern electro-hydraulic control boxes straight to the glass, no more drilling of cab interiors.

■ Easily fixed & removed in seconds ■ Available from dealers throughout the area

Dynamica Ltd

Enterprise Road Industrial Estate, Mablethorpe, Lincs. LN12 1NB Tel: 01507 477355 • 01507 473052 Fax: 01507 478832

in its class and customers so far have been very impressed with its simplicity and the power of its engine and gearbox.

“The Quadtrac hasn’t really had a competitor before in my

eyes – the Challenger has its place but it’s not in the same league. The DeltaTrack will do the same things that you’d use a Quadtrac for.”

For more see page 10

Auctioneer gets the blues

See page 12

www.mchale.net

2

APRIL 2014

WWW.WRIGHTSREGISTER.COM

Chris makes tractors his main concern FARMERS and contractors in southern Shropshire have somewhere new to go for tractors and equipment – Severn Farm Machinery at Pontesbury.

The business has been set up by experienced machinery dealer Chris Willner with his wife Jane, supported by their sons Matthew, 28, and Michael, 23.

“I had no plans to return to the agricultural equipment sector after departing Rea

Chris Willner has launched a new McCormick tractor dealership.

McCormick tractor with Krone attachments – it’s a match made in heaven for Chris Willner.

Valley Tractors, a highly successful multi-branch dealership,” said Chris. “But the opportunity to represent McCormick tractors and Krone grass equipment in the area, and create a new business opportunity for the family, was too good to resist.”

The new company has a McCormick territory extending from Shrewsbury to south of

Ludlow and between Chirbury in the west to beyond Kidderminster. It complements the coverage provided by three neighbouring dealers.

The area covered by HJR Agri at Oswestry is to the north-west; Hilton Machinery covers an area to the north-east from new premises at Newport, and P&D Engineering is to the south-east at Bredon. An open

territory to the south and south-west of the new dealership’s area extends into mid-Wales.

“Although we’re located towards the top of our trading area at Pontesbury, there’s a decent road network to get our service vans on-farm whenever they’re needed,” Chris said. “I’m really looking forward to seeing the venture take off.”

WWW.WRIGHTSREGISTER.COM

APRIL 2014

3

TYRE DISPOSAL TRADE & COMMERCIAL Collection & Environmental

Recycling of Tractor-Truck-Industrial & Car Tyres

UK LIMITED

www.envirotyre.com Collection throughout Central & Eastern England

PLEASE CALL 0845 331 2747

4

APRIL 2014

WWW.WRIGHTSREGISTER.COM

BULK BINS Available from 6 to 28 tons

Wanted and For Sale Tel: 07774 737966

What are you waiting for? Get back to work! More than 70 of the Basildon New Holland factory’s first employees were reunited to celebrate its 50th anniversary.

Golden get-together shows the Basildon bonds are still strong NEW Holland has kicked off golden jubilee celebrations of its flagship tractor factory in Basildon by reuniting more than 70 veteran workers who clocked in on its opening day 50 years ago.

Since the plant’s launch in 1964, more than 1.8 million British-made machines have rolled off the now 2km production line. The site employs 1000 people, makes 23,000 tractors each year, and uses 600 tonnes of material every day.

To mark half a century of achievements New Holland managing director Andrew Watson welcomed the workers in the customer centre, prepared in a special 50th anniversary livery, before inviting them to a guided tour of the plant and a lunch in the showroom.

At the event was one of the early plant managers, 73-yearold Bob Friedlander, who was in charge from 1985-92 but first arrived in 1963 as a graduate trainee.

He said: “The whole assembly site has moved forward in leaps and bounds. It’s become far more efficient and safer. We’re all thrilled to see the Basildon plant still exists and is going from strength to strength.”

The first models produced were the Ford 3000, 4000 and 5000 series but Basildon is now home to the powerful and

popular T6 and T7 ranges. They fly the flag for British manufacturing in 120 export markets worldwide, helping to make New Holland one of the UK’s top 15 exporters.

As well as investing in the local area, the site has grown into a centre for New Holland’s technological and environmental advances. It is capable of producing 14,500 bespoke combinations of specifications.

“It’s like stepping into the future,” said Francis Perkins, 73, a former forklift driver, after finishing the tour.

Don Ayrton, 83, who worked at Basildon for 29 years, added: “It’s beautifully clean and unbelievably efficient. The working environment is infinitely better and it’s very, very modern and the quality that is being produced now is better too.”

Recent high points at the factory have included the opening of the new customer centre in 2011, a visit by Prime Minister David Cameron in 2012, and in 2013 when the customer centre was expanded with a dedicated showroom.

The current plant manager, Colin Larkin, himself started on the assembly line in 1985. He said: “It was a pleasure seeing so many familiar faces back at Basildon and that such experienced workers were all so

impressed with how it has developed and improved.

“In 50 years it’s become a much more modern plant producing a much more sophisticated product, which is thanks to the investment which has also created the dedicated customer centre.

“I think the reunion highlights the camaraderie and our long history. About half the current workforce is from Basildon and it shows the local people too that we’re here for good.”

Andrew Watson added: “The reunion is important for us because the people who set up the plant in 1964 are actually

part of the heritage of the New Holland brand and culture of the factory.

“The fact that the plant is the only tractor factory left in the UK is something they can take pride in. It’s a strategic plant for New Holland because the products we make are an increasingly important segment in the tractor market.

“The plant has a tremendous amount of flexibility for the future, it’s perfect logistically, and we’re not looking to go anywhere else. We’re here to stay; modernizing, training and serving the customer. We’re in for the long haul.”

High speed train project could be a rail headache for farmers FARMERS have spoken of their concern about the proposed route of the Government’s new high speed rail link – HS2.

The National Farmers Union has said it is worried that time is running out to consult landowners and those who work the land about the project.

It follows the proposal by the new head of the HS2 scheme Sir David Higgins that the whole thing, including a 43 mile stretch to Crewe, should be fast-tracked and built six years earlier than planned.

Dr Andrew Clark, NFU head of policy services, said speeding up HS2 had the potential to seriously affect farmers’ livelihoods and their ability to make allowances for the effects of the scheme on habitat by, for example, planting more trees and grass meadows.

“We recognise the importance of investing in the nation’s infrastructure to ensure better communication and transfer of goods and services,” he said. “However, we are worried over a distinct lack of engagement with the farming community which will be directly affected by the proposed route as well as the Government’s refusal to consider prompt and adequate compensation for farming livelihoods damaged by this national project.

“HS2 really needs to do more to ensure all farmers and landowners are contacted and properly informed so they fully appreciate the impact on their businesses. The NFU is pleased to see that Sir David has stated that he has rejected any thoughts that the project should cut back on planned mitigation measures whether noise or environmental. These are vital for landowners and farmers. They will help reduce the impacts on hundreds of farming businesses and may help remaining businesses to continue during the disruption of the construction phase.

“Sir David also said that he is fully supporting the Government’s approach to property compensation. We have already said that we’d like to see the compensation schemes that have been consulted on brought in as soon as possible so that people suffering from blight can gain from the benefits of the different schemes.”

WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see page 19

APRIL 2014

5

6

APRIL 2014

WWW.WRIGHTSREGISTER.COM

All hands to the pumps as Rix backs new events venue

Tanks a lot. Pictured with the specially reliveried Rix tanker are, from left, Stephen Edwards, ex-chairman of Driffield Agricultural Society; John Clancy, present chairman; Duncan Lambert, director and general manager of Rix Petroleum; Derek Lamplough, president of Driffield Agricultural Society, and; David Tite, chief executive of Driffield Agricultural Society at Driffield Showground.

FUEL company Rix Petroleum has been announced as the headline sponsor of a major new entertainments venue earmarked for Driffield’s historic showground in East Yorkshire.

The £281,000 development, which will improve and extend the current farmers’ market building, has been christened the Rix Pavilion after the company agreed a five-figure sponsorship deal with Driffield Agricultural Society.

The arrangement will also see Rix Petroleum’s branding appear on the signs around the showground promoting a host of events on the site, including Driffield Show and the Game and Country Fair.

A specially designed Rix fuel tanker commemorating the five-year agreement has been commissioned by the company to serve farmers and rural communities in Driffield and surrounding areas.

Duncan Lambert, director and general manager of Rix Petroleum, said the sponsorship deal extended the already strong ties between the company and

Driffield Agricultural Society. Rix Petroleum has attended Driffield Show for 66 years in succession and occupies one of the largest exhibition spaces on site every year.

Mr Lambert said: “We have been serving farmers in East Yorkshire for more than 100 years and for a great many of those we have been attending Driffield Show. As a result we have developed a close working relationship with the Agricultural Society.

“Partnering with them to sponsor the new building is a real source of pride for us and we are delighted they have chosen to call it the Rix Pavilion, it is a real honour.”

David Tite, chief executive of Driffield Agricultural Society, said the building would be unlike any other in the town and would provide a top-class venue for conferences, dinner dances, concerts and theatrical performances.

It will also enable the society to stage indoor events, making it less dependent on the weather, Mr Tite added.

“There is always the threat of a wet show week which means we can lose a lot of income,” he said.

“That happened in 2011 and 2012 and it was quite damaging, but it taught us a valuable lesson.

“We discussed the idea of a really good indoor venue as far back as 2009 but funding was an issue at the time. Now, thankfully, that is in place and we can go ahead with our plans.

“We believe the new venue will help us maximise the potential of the showground and really benefit the town.”

The building will feature a mobile stage and dance floor, dining and conferencing facilities and seating for between 300 and 350 people, but can be made smaller with the use of partition walling.

The development is due to go before East Riding planning committee during the spring. Fundraising is ongoing and there are still packages available for anyone interesting in supporting the development.

WWW.WRIGHTSREGISTER.COM

APRIL 2014

Only 79p an issue when you subscribe – see page 19

7

Innovative Sumo joins the stable of Welsh machinery firm

The tractor firm aiming to make customers ‘appy’ A FARMING news app is being launched by New Holland for iPad and Android tablets.

The app will draw together general farming news from a number of different outlets in the UK as well as offering news feeds from the Chicago Board of Trade and the European Agricultural Commission.

Naturally, news about New Holland itself will feature prominently too. Farmers will be able to pick and choose which feeds they want to feature in a ‘personal area’ within the app.

A spokesman for New Holland said: “Recent research has shown that as many as 95% of Europeans get their news from aggregators: now farmers in the UK and the Republic of Ireland can keep abreast of the latest information relevant to their business with this new app developed specifically for them.

“In the near future the app will be enriched with new sections to give farmers a complete update on the most interesting news for their business and their free time.”

THE Sumo range of cultivation equipment is now available from a new stockist in Wales – Brodyr Evans Bros.

The company already holds franchises for Massey Ferguson, Merlo, Kuhn and Conor.

Brodyr Evans spokesman Owen Jewell said: “This was a natural move for us. The Sumo range fitted nicely into our existing offering and there was no one else offering the same sort of build quality as Sumo.

“This addition is a good match with our other main franchises. It adds to our claim that we can look after all our customers’ requirements for both new and used machinery along with assured after-sales support from our experienced engineers and parts staff.

“It is our proud record that we have been servicing the agricultural industry in mid, west and south Wales for more than two decades. Our depots at Haverfordwest, Llanrhystud, Machynlleth and Cross Hands cover the counties of Pembrokeshire, Ceredigion, Powys, Carmarthenshire and Glamorgan for all aspects of farm machinery and tractors.

“We had a customer who was clear that he had come to find fault with the Trio we had on display in our yard.

Well, he sat and looked at it for a

while, then walked around it a few times. But he couldn’t find anything wrong with it, and at the end of the visit, Locke Bros bought the Trio off us there and then, without even seeing the machine work!”

Sumo’s Richard Hales said his firm was very pleased to be working with Brodyr Evans and that there was a big gap in west Wales for the type of machinery Sumo produces.

“The Trio is a unique machine which consists of three elements to create a seedbed in one pass, and it should have a significant impact on timeliness and establishment costs for local producers,” he said.

“Low draught subsoiler legs are followed by a double row of concave discs to lift and mix the soil, then the patented multipacka consolidates the surface to leave a weatherproof finish. It has become the UK’s topselling one-pass cultivator and the verb ‘to sumo’ has passed into farming language.

“Our GLS will, we believe, also appeal to farmers in the region. A single pass improves and revitalises compacted grassland that is suffering from the effects of rainfall, livestock trampling and heavy machinery.

“It creates a sub-surface shattering effect that will improve drainage

How the west was won. Owen Jewell of Brodyr Evans, left, and Sumo’s Richard Hales with the Sumo Trio.

and root development leading to a soil environment that promotes maximum grass growth and stronger plants that are better suited to withstand periods of prolonged rainfall or drought.

“A leading row of straight, serrated discs cuts a slot for the following legs, which lift and fracture the earth, then a shark fin packer consolidates/aerates the surface to leave a level finish

across the full working width.

A following harrow can be fitted to disturb and scatter dead vegetation and surface debris.

“Both the Trio and GLS have already created a lot of interest in the area and, in view of the wetter than average winter, I am sure that Brodyr Evans is going to be extremely busy demonstrating our machines over the coming months.”

JCB asks: can you dig it?

DIGGER firm JCB has been encouraging would-be entrepreneurs to become owner-operators of its machines at a ‘be your own boss’ seminar held in March.

The event, attended by more than 100 people from all over the UK, was held at its World Headquarters in Rocester, Staffordshire.

JCB backhoe loader business

growth managing director Yvette Henshall-Bell said: “Many of JCB’s customers started their firm with just one backhoe loader and today run very successful

businesses with hundreds of JCB machines.

“The ‘be your own boss’ event is the start of a journey to encourage people to be the entrepreneurs of the future.”

Having set out as a digger driver for hire with his own machine aged 16, 10 years later Dave Boffey now runs his own successful company.

It’s a (back) hoe down. Delegates at the ‘be your own boss’ event put a pair of JCB backhoe loaders through their paces.

Delegates spent the day talking to experts from the world of banking, accountancy, finance, law and taxation to guide them through the potential pitfalls of setting up their own business.

They were also treated to insights from successful entrepreneurs, including author and motivational speaker Brad Burton, who is managing director of the UK’s fast-growing business networking company.

He said: “When I started my business I was £25,000 in debt.

Fast forward 10 years and a few struggles and challenges later, I now run a multi-million pound,

international business. Anyone can do anything if you apply yourself. It’s about belief.”

Dave Boffey, 26, of Belper, Derbyshire, set out as a plant hirer using a 3CX backhoe loader as a 16-year-old school leaver in 2004. A decade on his business is thriving and he attended the event to inspire others to follow in his footsteps.

Dave said: “Ten years ago I set up on my own with a secondhand JCB backhoe. It can be daunting investing every single penny you have into machinery but I really want to demonstrate to others if you work hard and put your heart into it you can succeed.”

8

APRIL 2014

WWW.WRIGHTSREGISTER.COM

JCB’s top flood team goes where lorries fear to tread SIX JCB machines have been helping to spearhead flood relief efforts in the Somerset Levels – a pair of backhoe loaders and four Fastrac tractors with trailers.

The vehicles have been on loan to the Environment Agency to help with the clear-up operation since early February.

They have been based at the agency’s Bradney Depot, near Glastonbury, and their duties have included hauling pumping equipment, ferrying personnel around and moving large quantities of stone to otherwise inaccessible areas.

Environment Agency flood risk control officer Andrew Pearce said: “We simply can’t get articulated lorries into these remote places. It wouldn’t be possible to access some of these locations without the JCB machines.”

The 4CX backhoe loaders are primarily being used to load the stone for transport to the flooded areas at present.

However, Andrew said that once the flood waters have receded, the machines will be put to work removing temporary structures and helping to clear up in the many villages hit by the waters.

“The levels are dropping now and we’ve got a good strategy in place going forwards,” he said.

“The work is more about cleanup at present, we are able to pump more water now to protect properties.”

Water water everywhere – a JCB Fastrac 3230 helps out with flood relief efforts on the Somerset Levels.

He said the JCB machines had provided vital support to the Environment Agency’s relief efforts, delivering exceptional all-weather, all-terrain capabilities to assist in delivering rapid assistance where it is needed, to help farmers and villagers within the flood-hit areas.

“The machines have been invaluable. You’ll have a hard time getting them back off us now,” said Andrew.

JCB chairman Lord Bamford said: “The scale of the floods was devastating for all concerned. I am delighted that as Britain’s biggest equipment manufacturer we were able to rapidly provide some useful assistance to the Environment Agency, and to the many families affected by the

terrible flooding in the Somerset levels.”

When JCB’s task force was sent to help the flood relief effort, a JCB 541-70 Loadall telescopic handler was already being used to help farmers to feed livestock.

A 541-70 Loadall and Fastrac 2170 were also deployed in early February to assist the Forage Aid Scheme, spearheaded by farmer Andrew Ward, operating from Sedgemoor Livestock Auction near Bridgewater. As a direct response to a plea from the Forage Aid team, due to an unprecedented response from farmers all over the country donating feed and bedding, JCB despatched two additional 53170 Loadalls to help, bringing the fleet to four machines.

WWW.WRIGHTSREGISTER.COM

K ITBUILD IN GS

Steelw o rk,ea vesb ea m s,p urlin sa n d b o lts 6 0’x 30’from £2,495 plu sVAT ex w orks 084 5 4 5 9 4 079 •w w w.kitb u ild in g s.co .u k

Only 79p an issue when you subscribe – see page 19

APRIL 2014

9

10 APRIL 2014

WWW.WRIGHTSREGISTER.COM

It’s the Delta force Out in the field doing what the DeltaTrack does best.

THE Deltatrack family from Versatile is now available via JPM Agricultural in Britain and it’s not surprising that the machines have already caused quite a stir.

Powered by a whopping 15l Cummins engine with variable geometry turbocharging technology,

One of the DeltaTrack’s track units.

They’re comparable in size to those used by the Case IH Quadtrac.

the DeltaTrack is available in either 450, 500 or 550bhp versions – although the engine’s actual output is higher still since the figures given are for operations at 2100rpm.

All three use heavy duty CAT TA22 powershift transmission, which provides 16 forward and four reverse gears. The TA22 is fully programmable for autoshift and speed matching too.

Despite being a large machine, the DeltaTrack is capable of road speeds up to 22mph for moving between fields.

Its advanced undercarriage is designed for longevity and extended track life, with an integrated axle mounting system and reinforced connection to the frame of the tractor.

Steel saddle fuel tanks help the DeltaTrack maintain an even 50/50 weight distribution regardless of how much fuel is left – a crossover tube

carries fuel from side to side to keep the tanks level.

The DeltaTrack drivetrain maintains the Versatile outboard planetary system. The outboard planetaries drive power directly above the bogies to maintain equal torque to each track unit. The goal is to minimise the disruption of power transfer while turning.

A positive drive system is fitted to reduce wear, friction and heat. Track slippage is prevented by track lugs that interlock with the drive wheel. The DeltaTrack uses the largest drive lugs in the industry.

Large idler wheels are fitted to the machine to improve approach angle and reduce the risk of ‘submarining’ in muddy conditions. Midroller wear is reduced thanks to a polyurethane coating.

The DeltaTrack 500DT actually makes a maximum of 550hp. Torque is a whopping 1850lb-ft.

Climb on up and give it a go. The awe-inspiring Versatile DeltaTrack is now available in the UK from JPM Agricultural.

The DeltaTrack’s drawbar can be moved from side to side or locked in place and the tractor has a pivot pin measuring 3.15in.

A total hydraulic flow of 208l per minute is standard or 428l per minute can be achieved with the optional high flow hydraulic system. Four remote valves are fitted as standard with six being an option.

The DeltaTrack is fitted with the Versatile HQ cab, which has an incredible 85sq ft of window glass to provide a panoramic view. The whole tractor can be controlled from an easy to use right-hand side console and a semi-active air-ride suspension seat is fitted as standard. The HQ cab also comes with a large training seat.

The optional Deluxe cab has the same features as the HQ but also includes a 110v AC power outlet, a 5v integrated USB port and a subwoofer

for the high quality stereo sound system. There are four cup holders as standard, plus coat hooks and the operator’s seat has a 104 degree swivel range to maximise visibility when towing implements. In the Deluxe cab, the seat is also heated.

For working in low-light conditions, the DeltaTrack is equipped with 14 standard worklights mounted on the grille, front fender, rear fenders and cab. Rotating magnetic roof-mounted beacon lights are also available and come as standard on the Deluxe cab.

Another option is HID lighting. These lights provide up to 10 times more light than conventional headlights. If the HID package is selected, HID lights replace four of the standard halogen work lamps – one on each fender and two headlights on the grille.

For more information about the DeltaTrack visit www.jpm-agri.com

WWW.WRIGHTSREGISTER.COM

APRIL 2014 11

Only 79p an issue when you subscribe – see page 19

Topless Landini gets sheepish in Cumbria GETTING modern tractors in and out of traditional stone buildings is a challenge for National Trust tenant Alan Beard – so he’s had to be very careful in picking the right machine for the job.

He runs Herdwick and Swaledale sheep with common land grazing rights for 1000 head on the Cumbrian fells, and grows fodder on 150 acres of

land at Wilkinsyke Farm in Buttermere. He is not allowed to erect any modern buildings for his business however.

“We’re using buildings designed as horse and cart sheds for fattening lambs, and there’s very narrow and limited access for modern machinery,” said Alan. “Things are a bit tight in all directions when it comes to cleaning them out.”

Having relied on a kit-built tractor from China for the past three years, he recently upgraded to a new Landini 1-55M from Newton Trailer Centre.

Centre spokesman Tony Blackburn said: “We’ve supplied a number of different Landini tractors in the area, including smaller versions of Alan Beard’s tractor for dairy yard scraping with mechanical or

hydrostatic drive.

“The bigger Powerfarm has a reputation for being ‘bulletproof ’ and together with a simple specification it makes an ideal stockman’s tractor.”

Alan has had to do without the weatherproof cab option however, since with it fitted the 1-55M would be too tall to access his buildings.

“It actually makes it really easy to hop on and off, which is something you’re doing quite a lot with yard work,” he said.

“The tilting steering wheel can be moved out of the way and with the gear levers positioned to the side you’ve a clear platform and a good-size step.”

The tractor comes with a 12x12 transmission and a joystick-operated front loader with mechanical self-levelling

Alan Beard, left, receives the keys to his little Landini 1-55M from Tony Blackburn.

has been fitted for clearing out sheds and handling bales.

It has a Euro universal hitch to save having to buy new implements and the optional third hydraulic service operates a muck grab and a bale unroller for dispensing silage bales into feeders.

Come summer, Alan said he was hoping to soak up some sun on his open-air tractor as he heads into the fields tedding, rowing up and baling hay.

“I’m looking forward to that,” he said. “It has a good spec for a little tractor; I’m really impressed with it.”

Magnificent 70 plough into charity challenge MORE than 70 ploughmen helped raise £1000 for the Royal Agricultural Benevolent Institution during a charity match.

The event took place at Elms Farm, Nailstone, near Market Bosworth.

Organiser Richard Hewitt said: “I’m thrilled to have raised such a fantastic amount of money for RABI once again to help support my fellow farmers who are in need.

“We were blessed with the weather and I can’t thank the host farmer Andrew Crawford and his family enough and all

who have supported us, including our sponsors, for all their support in making the ploughing match such a success.”

RABI East Midlands regional manager Milly Wastie said: “It has been a pleasure to work with Richard Hewitt and the local RABI fundraising committee who have worked so hard to make the event a triumph.

“Annually the RABI provides around £30,000 to low income farmers and their families in Leicestershire who call upon the charity in times of crisis.

“Our support, practical or financial, is provided in

For those about to plough, we salute you. Brian Sutton, farmer and RABI committee member with fellow ploughmen.

confidence to around 27 families locally and over 2000 families across England and Wales.”

The RABI helpline number is 0300 303 7373 or email milly.wastie@rabi.org.uk

12 APRIL 2014

Auctions and events

WWW.WRIGHTSREGISTER.COM

Just how much is that Massey?

Try a spot of crystal ball gazing MACHINERY auction house Cheffins has enjoyed its best sales results in nearly 12 months – suggesting that there is plenty of life left in the market for relatively new used tractors.

This two-wheel drive Massey Ferguson 3060 has a four-cylinder Perkins which, when it’s on top form, kicks out a perfectly respectable 77hp. It could be yours on April 7.

The company held its most recent Cambridge Machinery Sale on March 10.

Auctioneer Bill Pepper said: “After the great February sale, the yard looked devoid of stock and after a considerable amount of emailing, advertising and contacting vendors both old and new, a more than healthy 500 examples of all makes and models, colours and creeds were lined up.

“In fact, the selection was the best we’ve had for many a month and as we often find, more stock means more buyers, with more than 60% finding new homes.”

He said that among the top bidders were organisations from African nations as well as home-grown UK buyers.

“Masseys achieved the best prices for 12 months,” he said. “We just about had a clean sweep apart from some criminally highly reserved machines. Such ‘reserve inflation’ is not only frustrating for all concerned but increases the likelihood of a repeat of the ‘boom and boost’ scenario we experienced last year.

The auction house dog gives his woof of approval to this battered but serviceable 2WD Ford 5000. It’s due to go under the hammer at Cheffins on April 7.

Profiles don’t come much cleaner or more handsome than that of this 1988 4x4 Ford 7810. It comes with air con too. What’s not to like?

Ever seen a tractor wearing a baseball cap backwards before? Well, now you have. This Case Maxxum 5130 is a 4x4 and has the desireable powershift gearbox. It’s up for auction on April 7.

You get a typically Gallic curvy bonnet and stylish gauges with this Renault Ceres 95 – these naturally being the two most important considerations when selecting your next tractor. The loader looks good too, however, so there’s that.

Modern John Deere 6210 4x4 has a spanking newlooking cab interior. Does a well-cared for cab make the tractor a minter? You decide.

“Call me stupid but I can’t quite understand how reserves in some cases could be £1000 more than the top price we achieved last month. Maybe a mythical crystal ball is involved? Of the Masseys entered, without doubt the finest examples were a line up of imported 165s and 185s.

“Sailing past their reserves the 165s made £4800 and the bigger models £5200ish. Before vendors of such get too excited, these were fine machines, good enough to grace any collection and they made the prices they justly deserved.

The less well-preserved examples made typically £3-3500 for a 212, four bolt 165 and £4-4300 for the bigger model, again four bolt pump.”

He said that older Fords had struggled to sell in ‘tractor sale 1’ but newer versions had done well.

“A tidy blue roof 7840 SLE topped £8800, an 8340, similar in condition, made exactly the same price and a smart 8630, not everyone’s cup of tea, made its money at £9700,” he said.

“Massey Ferguson did well in this section too although the bigger horsepower models weren’t flavour of the month: a respectable 5455 c/w loader (’54 plate) made a punchy £17,800 and is off to Malta, a 6280 surged to £13,200, £12,500 bought a fresh 6190 and an ever-popular 390T topped £9000.

“John Deeres were up compared with last month and unlike MFs, horsepower was in demand. An old-school 4255 sold well for £11,500 destined for the USA, a 2005 7920 was bid and bought for £35,000 and a brace of 7930s both made around £38,000. Top JD price was achieved for a locally entered 6190R which was hotly contested to £56,000 and is off to Spain.

“Other makes which sold well: JCB Fastracs as ever made their money and very few were left unsold. Top price was £21,000 for a 2005 3170.

A good line-up of Fendts attracted foreign money. A grunty 926 got away by the skin of its teeth for £33,000, an ever-popular 820, farmer entered, nudged £45,000 and a lovely little 312, 2007 in the year and showing less than 3000 hours sold well for £38,000.

“A lovely line-up of low-houred Valtras attracted much attention too. A 12 plate sold for £37,500, a Same aged T172 achieved £42,000 and a ’61 plate T202 fetched £46,500.”

Cheffins next Cambridge sale takes place on April 7.

With a cardboard box masquerading as a driver’s seat, this JD 2140 has seen better days. Its fourcylinder diesel made 82hp when new.

A tractor with bits of sacking instead of a proper seat covering, this Case 695 nevertheless looks all right from outside at least.

Take a trip back to the early 1980s with this DeutzFahr DX145. Back in those days 132hp made this a beast of a machine – today it’s more about those chunky looks.

It’s a titch but the tinwork’s not too shabby and surely few could resist the opportunity to be seen in the workmanlike Q cab of this Ford 6610 utility tractor.

It almost seems a shame that someone should have to use this spiffy 2005 CLAAS Ares 696 to do some actual work.

Conventional wisdom suggests that anything with the letters ‘XL’ appended on to its name is automatically bigger than, and almost certainly better than, its regular ‘non XL’ counterpart.

Conventional wisdom, however, went out of the window with the Case International 856XL of 19831985. Its four-cylinder 3.9-litre engine made just 85hp compared with the 856’s six-cylinder 4.9-litre lump which made 95. Not only that, the 856’s fuel tank was nearly twice the size of the XL’s – it probably needed it, having been built in those carefree days of cheap fuel in 1967-1971.

WWW.WRIGHTSREGISTER.COM

APRIL 2014 13

Only 79p an issue when you subscribe – see page 19

May the Force be with you this summer THERE will be celebrations to mark 50 years of tractor production at Basildon when the Blue Force 1000 event takes place.

Everything to do with Fordson, Ford and New Holland will be showcased at Newark Showground on June 28-29, with Ford 1000 Series tractors taking pride of place.

In addition to tractors, there will be agricultural, industrial and commercial vehicles, old and new, with machines in every condition from alloriginal to fully restored.

The event will be open to Blue Force members, nonmembers, enthusiasts and visitors who simply want to see what all the fuss is about.

It will not only be Ford and New Holland tractors on display, but also conversions from County, Roadless, Muir-Hill and others.

A spokesman for the event said: “Blue Force – Friends of Fordson, Ford, New Holland and Derivatives is a totally independent tractor club dedicated to all those who wish to preserve a line of machinery that is an extremely important part of the world’s agricultural heritage.

“Blue Force encompasses a family of tractors first introduced in 1917 which continues nearly 100 years later under the global brand of New Holland.

“The year 2014 marks the 50th anniversary of the Ford worldwide family of tractors which was initiated by Henry Ford II in 1960. The 6X range, which today is more commonly referred to as the Ford 1000 Series of tractors, was built to standardise production around the world at factories at Basildon in Essex, Antwerp in Belgium and Highland Park in the USA.

“To commemorate this famous milestone in tractor production history, Blue Force – Friends of Fordson, Ford, New Holland and Derivatives will be hosting Blue Force 1000 at the Newark Showground.

“The initial aim is to have more than 1000 Basildon-built tractors present with others in attendance ranging from the very first tractors built by the Ford Motor Company, carrying the Ministry of Munitions’ name, followed by the famous Fordson Model F through to the very latest offering from New Holland, spanning nearly 100 years of tractor production.

“All models, ages, conditions and configurations of machines will be made more than welcome. This year also sees a second celebration, that of 50 years of tractor production at the famous facility in Basildon, Essex.”

The main themes will be the 50th anniversary of the Ford 1000 Series tractors as well as 50 years of tractor production at Basildon.

Among the many displays at the show will be the main theme of Basildon-built tractors from 1964 to 2014, the Ford 6X and 6Y 1000 Series, all Fordson and Ford-built tractors from around the world from 1917 to 1964, and a display of the latest tractors from New Holland.

There will also be conversions

based on Basildon skid units, modern New Holland construction machines, utility and groundscare machines, New Holland machines built and finished in Fiat livery and vice versa, commercial vehicles carrying the Fordson and Ford names and much more.

Gargantuan show mixes live action with foodie attraction ONE of Britain’s largest county events, the Lincolnshire Show, celebrates its 130th year this year.

The show takes place on June 18-19 and will offer an e-ticketing facility for the first time.

Among the main attractions will be the RAF Falcons parachute display team, live cookery demonstrations and a truly gargantuan range of local stalls selling every conceivable form of produce.

Lincolnshire Showground and Lincolnshire Agricultural Society director Jayne Southall said: “The Lincolnshire Show is undoubtedly a county institution and we are immensely proud that this is our 130th year and the show is bigger, better and more diverse than ever.

“This year is going to be a phenomenal show as we have such a huge range of attractions and activities for the whole family.

No matter what age you are the show offers a

jam-packed day out for everyone to see, experience and taste the best of Lincolnshire – be it from entertainers, farmers, producers or retailers.

“Now we have introduced our paper-free, quick and easy e-ticketing system, I expect we will welcome even more guests this year. The headline attraction of this year’s show will be the RAF Falcons, who will perform an aweinspiring military parachute freefall display – including advanced manoeuvres and falling speeds of up to 120mph.

“The RAF Falcons display at venues all over Britain and Europe, so we’re honoured to be able to see their fantastic display at the show.”

Other attractions will include Broke FMX, a motocross bike athletics group, and Doctor D’s Science Workshops, which will aim to impress children with awe-inspiring science demonstrations and experiments.

Lincoln Red cattle will be among the breeds on display at the Lincolnshire Show.

Earl and Lightning take the Fuller cart for a canter around the main ring.

Further entertainment will be provided by Simon Whitehead, a professional ferreter, the Cuerden Falconry display and Jive Pony – a female equestrian display team.

The Food Court will be filled with chefs celebrating the best of Lincolnshire produce during the show. There will be cooking demonstrations from a range of local producers, including multi award winner Redhill Farm and the Grimsby Fish Merchants Association, which supplies 70% of the nation’s chilled seafood.

Local choirs are being brought together by radio station Lincs FM to perform the latest hits, and award-winning dog show Agility Buds is taking time off from Crufts to entertain the crowds.

For more information visit www.lincolnshireshow.co.uk

There’s very little to beat fresh cream and strawberries on a hot summer’s day.

Proposal for ‘pleasing’ exhibition hall revealed PLANS have been drawn up to replace the original exhibition hall on the Great Yorkshire Showground.

The site’s owner the Yorkshire Agricultural Society is applying for planning permission to replace the original hall, known as Hall 1, with “a more modern and visually pleasing building”.

The £10 million project will be the largest ever undertaken by the society.

The Great Yorkshire Showground has 5372sq m of lettable event space in the current Hall 1 and adjacent Hall 2 which,

if the application is approved, would increase to 6270sq m, providing nearly 900sq m of extra floor space for the venue.

An independent survey last year by Genecon, revealed that the showground adds £47 million per annum to the local economy.

Society deputy chief executive Heather Parry said: “Hall 1 was originally constructed in the 1960s and expected to last for 20 years so it has been a good Yorkshire investment!

Unfortunately it is now deteriorating so

we need to replace it. Today’s visitors expect higher standards and better facilities than those of 50 years ago so we are adding a large foyer area, a cafe and improved toilet facilities.

“Harrogate is already a popular choice for event organisers and we want to make sure it stays up there with the best. It is expected that the cost of this building will be in the region of £10m, which is a significant investment but an important one for the financial future of the society and the local economy.

“We work closely with HIC (Harrogate

An artist’s impression of how the new building, to the left of the picture, would look.

International Centre) in the Harrogate town centre and are attending Confex, the national events show,

together with Visit Harrogate. Our facilities remain complementary but distinctly different.”

14 APRIL 2014

WWW.WRIGHTSREGISTER.COM

Landscape and forestry Make the cut with SaMasz’ pair of wide Mega mowers Is it possible to light a mower-conditioner more moodily than this? We don’t think it is. See the exceptional John Deere 830 centre-pivot mower-conditioner for yourself at Stoneleigh in May. Actual mood lighting may not match illustration.

Working debut for John Deere’s floaty 800 Series JOHN Deere’s new 800 Series mower-conditioner will be shown working for the first time in the UK at this year’s Grassland & Muck 2014 event at Stoneleigh in May. The 830 centre-pivot mowerconditioner is available in working widths of 3 or 3.5m, with a choice of impellers or adjustable rubber rollers for the conditioning process.

As an exclusive feature, the modular cutterbar allows highspeed mowing and has been engineered to duplicate the load conditions of a self-propelled machine.

The mower’s balanced design and high ground clearance are also intended to increase field performance,

while a new floating suspension system allows the machine to closely follow ground contours.

The 830 is equipped with six discs and 58 preloaded tines, which, John Deere says, significantly increase capacity and crop flow under varying harvesting conditions. Even in heavy and wet crops and at high working speeds, the parallelogram design of the conditioning hood maintains the optimum distance between the impeller tines or rollers and the hood at all times.

Grassland & Muck 2014 takes place at Stoneleigh Park, Warwickshire, on May 21-22.

Visit www.grasslandevent.co.uk for more details.

Barrus hits the road to showcase its range of kit

MACHINERY importer EP Barrus has spent a week touring its dealers to bring them product and service updates.

It has also held day-long seminars in four places – its own base of Bicester in Oxfordshire, Builth Wells in Wales, York, and Swaffham in Norfolk.

These have covered all the brands in the fairly extensive Barrus range which includes the WOLF-Garten range, Cub Cadet lawnmowers and Wilkinson Sword tools.

Ben Lloyd of Charlies Stores in Wales said he was highly satisfied with the content and delivery of the event: “It has been well worth my time attending.

“It was informative and interesting, covering both technical matters and things

that we can use in the showroom to sell our WOLFGarten range and the Wilkinson Sword tools.”

Barrus Gardening Division sales and technical manager, Martin Wasley, said: “These events were well attended, with feedback being extremely positive on the support we offer our dealer network.

“We rate the Cub Cadet, WOLF-Garten and MTD/Lawnflite products very highly and so do our dealers.

Their service and professionalism are also an extremely important factor with consumers when choosing our products, and we appreciate the time and effort involved in attending our seminars.”

Barrus has said its roadshows will be back next year.

A PAIR of high output rangetopping combination disc mowers are now available from Worcestershire-based Weaving Machinery.

The SaMasz MegaCut 860 and MegaCut 940 three-point linkage mounted mowers have a 3m cutting width – the idea being to make sure no standing crop is run over by the tractor.

The width of the cut swathe can be manually adjusted. The cutting unit is supported on a spring-assisted trailing parallel linkage to allow float of +250mm and -150mm for highspeed operation on uneven ground.

A flow divider ensures synchronised movement of the two lifting rams using only one supply from the tractor. A mechanical lock secures the unit when it’s in transit.

The double-sided rearmowing unit extends the cutting widths to 8.6m or 9.4m while providing an overlap with the front unit of 4cm. The hydraulic safety breakaway system lets the units fall back 30 degrees while lifting them 70cm out of harm’s way with automatic resetting when the obstruction has been cleared.

Spring assistance helps the centre-pivot cutting units follow ground contours during highspeed mowing.

The MegaCut 860 weighs 2580kg and requires a tractor with more than 150hp to mow 10 hectares per hour.

Front- and rear-mounted mowing ensures that the SaMasz MegaCut never misses a spot.

Cutting a swathe with the MegaCut – available in both 8.6m and 9.4m flavours.

The MegaCut 940 weighs 2890kg and will mow 11 hectares an hour on a 160hp tractor.

Some decent horsepower is required to heft the MegaCut units – step forward Mr Massey, you too Mr Ferguson.

Each mower comes with a two-year warranty and they cost £19,600 and £22,730 respectively, plus VAT and delivery.

For more information email info@weavingmachinery.net or call 01386 49155.

Range of robotic lawn trimmers is expanded ROBOMOW has launched six new premium-range models in the UK. The new models, which are available now, effectively double Robomow’s existing range.

For small- and medium-sized lawns (up to 200sq m, 400sq m and 600sq m) the Robomow RC302, RC304 and RC306 are available, while the RS612, RS622 and RS630 can tackle larger areas (up to 1200sq m, 2200sq m and 3000sq m respectively).

Robomow is targeting a broad range of potential customers, from those who are keen to maintain the appearance of their lawns but find mowing a chore to more green-fingered homeowners who appreciate the environmental and other benefits of the Robomow such as its low energy use, powerful mulching system and cost savings when compared with alternative lawn-mowing solutions.

Also new for 2014 is the Robomow App, which allows users to manage their lawnmower via their mobile or tablet device.

Intended for commercial applications, the Robomow RS630 can tackle grassy areas up to 3000sq m.

Mower Magic is the sole UK distributor of the Robomow. The company’s managing director John Hall said: “Automatic lawnmowers are becoming increasingly popular as people realise the benefits they offer.

“The launch of these six new models represents Robomow’s confidence in the product and the potential the UK market offers.”

Just a small selection from the huge range of machinery and equipment available from EP Barrus.

Left: The little Robomow RC306 is intended for lawns up to about 600sq m.

WWW.WRIGHTSREGISTER.COM

APRIL 2014 15

Only 79p an issue when you subscribe – see page 19

FENCING CONTRACTOR

Adventure park picks 4x4 Cushman for diverse duties A CUSHMAN 1600XD-R utility vehicle has been delivered to the Cattle Country Adventure Park at Berkeley in Gloucestershire by local dealer, TH White Ltd. The road homologated fourwheel drive vehicle is being used for a range of tasks around the 30-acre leisure complex.

The adventure park has been operating for 18 years.

Founding director Tony Cullimore diversified the 80year-old family farming business and opened a smallscale venture, which he called The Cattle and Countryside Centre.

It has since grown from a field with a few swings to one of the best visitor attractions in the area.

Mark Clothier is the maintenance manager at the park and was one of the principal decision makers for the purchase of the utility vehicle.

He said: “We had three of the major brands out here to test and the Cushman won the day for a number of reasons.

“We felt the build quality was much better than its rival; it is more robust, wider and can take a standard pallet in the back, which is a great advantage when loading.

“It is more stable, has superior ground clearance – an important factor here – the

suspension seat for the driver gives a comfortable ride and it has a proper, decent towbar.

“Surprisingly, it goes anywhere in two-wheel drive and we’re getting 25 hours out of a tank of fuel. It could probably do with rear mud flaps and power steering would be an advantage, but generally it’s a good little vehicle and we’re very pleased with our buying decision.”

As well as fun day out for all the family with play barns, trampolines, boating lake, miniature train, climbing net, outdoor assault course and much more, Cattle Country remains a working farm with displays of unusual breeds of bovines including American bison together with an array of various other animals.

“We have over 100,000 visitors a year,” said Mark.

“During weekends and school holidays we are open to the public but during the week there are organised visits from schools and playgroups. Yes, we are a commercial enterprise, but we also pride ourselves on fulfilling an educational need.

“We welcome educational visits as we love to help in the development of children learning about the animals we have at Cattle Country.

“These trips take children around the farm and help them develop a better understanding

of farming and wildlife through a ‘hands on’ approach.

“We include a tractor and trailer ride around the farm where the children visit our animal encounters pen to see smaller animals. We also tailor the day to suit recently studied curriculum topics.”

Cattle Country is situated within the 184-acre Berkeley Heath Farm, owned by the Cullimore family and still farmed as a commercial operation.

The foot-and-mouth epidemic in 2001 had a drastic effect, wiping out the livestock on the farm and Cattle Country.

However, by reinvesting profits

A load of turf rolled up at the Turfgress Growers Association spring meeting.

organisation whose aims are to inspire and enable sustainable farming that is prosperous, enriches the environment and engages local communities.

Those present then made the short journey to the turf nurseries at Lindum Turf to see the Trebro harvester and forklift in action.

TGA chief executive, Tim Mudge, said: “It was great to kick the season off with a positive day of learning, networking and information sharing, and we extend our thanks to our superb speakers, and to our hosts Trebro and Lindum Turf.

“We’re reaching out to other growers to join us. Being part of the TGA is about growing and

Stewardship Scheme work undertaken Tel. Julian Nugus 01469 - 531137 Mobile: 07850 - 857988

FA8! -#'8A77 G6; George Knights, one of the support workers at Cattle Country with the new Cushman 1600XD-R.

Growers meet up on their own turf TURF growers from across the UK shared news and information and planned for the season ahead when they gathered in North Yorkshire for their spring members’ meeting.

The Turfgrass Growers Association event’s morning session was held at Skipton Little Theatre near Selby, where growers and trade members of the association heard from four speakers.

First to address them was Andy Spetch, who gave an insight into British Sugar’s topsoil business and the products developed as a result of the 7.5 million tonnes of sugar beet grown on the east side of the country.

Attention then turned to business management as Matthew Atkin of Action Coach discussed the benefits of business mentoring in enhancing efficiency and performance.

Ian True from Trebro then took the floor to give an introduction to the machinery being demonstrated that afternoon: the SC2010 automatic stacking turf harvester and the UKmanufactured Loadmac forklift.

Finally, TGA grower Stephen Fell, also UK chairman of LEAF (Linking Environment And Farming), outlined the benefits of integrated farm management and of being part of an

• POST & RAIL • STOCK, NET AND BARBED WIRE • RABBIT FENCING

learning together for the benefit of our industry and the customers we serve.

“The next members’ meeting will take place in early December and we invite growers to make contact with us so we can invite them along.”

back into the business year-onyear, the family business has flourished.

“I’m still a farmer at heart,” said Tony Cullimore, “but by careful management and a lot of hard work, we’ve now got all elements of the business functioning well.

“This includes a farm supplies shop and a wedding and conference venue.

However, the best part is seeing the happiness this place brings to thousands of children every year. That’s just reward in itself.”

E487*8#*7D GAK;7=A9#K'D 1:8*768I AK; 1*K=#K' 5:K68A=6:87 B%$6G<=GJH 6&9H!<6H&!J <94 JF%%=G$!J H& ,5B/ ?5B <94 0&F9H!(JG4$ BH$@<!4JIG% J6I$;$J *F== -=<9HG9K <94 2<G9H$9<96$ B$!DG6$J "&! ?$4K$!&@J <94 7&&4=<94J B%$6G<=GJHJ G9 HI$ G9JH<==<HG&9 &" BH&6A/ .$$!/ ,#FG9$ <94 -&JH ) E<G= *$96G9K

1*K=#K' 5<!K$ JH&6AJ &" <== JG'$J &" !&F94 %&JHJ/ J#F<!$ J<@9 %&JH ) !<G= <94 K<H$ %&JHJ+ 3== JG'$J &"

&D$!9GKIH 4$=GD$!( J$!DG6$+ 0&9H!<6H K!&@G9K &" I&;$ %G6A$4 J$$4J+ 5&6<= %!&D$9<96$ J$$4 6&==$6HG&9J G9 <== <!$<J+

H*;'*MAI#K' 5G96&=9JIG!$ K!&@9 ?<'$= JH<A$J <94 :G94$!J <94 J#F<!$ J<@9 JH<A$J+ 0<!!(G9K &FH 0&F9H!(JG4$ BH$@<!4JIG%/ ,5B/ ?5B &! ,7CB @&!A FJG9K (&F! &@9 =<:&F!8 >I$9 =$H FJ #F&H$ &9 HI$ JF%%=( &" HI$ ;<H$!G<=J+

5:K6A=6N FA8! -#'8A77D G:46%D G#K=:MK7%#8*D GE>> @/J .*MN @>(@$C&@)<@> :8 @>(@$C+>@@+& 1A0N @>(@$C&>@(@> F:?#M*N @$"$>C>"@+)( 222BLA8!3#'8A77B=:B4!

16 APRIL 2014

WWW.WRIGHTSREGISTER.COM

4x4

By MARk STOnE

Fiat’s latest incarnation of the Panda 4x4 is fashionable, practical and capable but watch out for the price tag. INSET: The old style Fiat badge looks more than at home on the front of the new Panda 4x4.

It’s hip to be square

Chunky 15in alloys, an increased ride height and cross country tyres add to the Panda 4x4’s off-road abilities.

Big bold lights add to the Panda’s new persona.

Don’t be fooled, the skid plates are lightweight plastic.

FRESH, fun and dare I say funky, Fiat’s latest incarnation of its Panda 4x4 is one of the most up to date supermini city cars to hit the roads.

The Italian firm has once again taken the most basic of outlines – the shape of a cube with a small box on the front – and added a whole new suit of clothes. It has also elected to include some seriously modern colours such as the sweet candy beige example although the car can be had in some more traditional hues.

Sitting 47mm higher than the standard version and riding on 15in alloy rims and 175/65R15 Continental CrossContact mud and snow tyres, the new Panda comes ready, willing and able.

There’s new front and rear detailing incorporating

improved lighting and neater slightly rounded lines. This gives the impression of a small, stylish but ultimately practical mini hatchback, the discreet 4x4 logo moulded into the side protection strips.

Four square doors and a full sized tailgate allow easy access for four adults and 225l of cargo space or two adults and 870l of load capacity with the rear seat back lowered. And if you feel the need, a tow hitch allows the Panda to haul a further 900kg of braked trailer freight, more than enough for any car of this size.

Inside, the cabin echoes the exterior, sections of contrasting trim making up the dashboard, door panels, handles and big, bold, easy to find and use controls. There’s a lot of hard

plastic here and given what the Panda 4x4 costs, I personally would have expected something slightly more upmarket.

On the plus side, sharp eyes will quickly focus on the word ‘panda’ that forms the textured surfaces. Come on Fiat, I know soft touch trim costs more but in a vehicle that costs just short of 16 grand, softer surfaces would seem to be more in order.

Should you be inclined to use this Panda to the fullest extent of its abilities the harder surfaces will clean with a damp cloth.

Dominating the driver’s area is a square steering wheel with rounded corners, the shape echoed by the slightly less than easy to see instrument binnacle.

Likewise, the gearlever knob, the sound system’s six speakers, the switchgear surrounds, the truly remarkable handbrake lever, the alloy wheel pattern, the rear fog and reversing lights and the less than flush fitting fuel filler flap all draw on the four-sided outline.

Covered in a tough, durable material the seats are more supportive than they are comfortable, rather reinforcing the fact that the Panda is intended more as a short journey motor rather than a long haul vehicle. Similarly, apart from the glovebox and deep bin that forms part of the dashboard, stowage isn’t as plentiful as I personally would like although the oddments roll that zips on and off the rear of the driver’s seat is a useful idea.

Beneath the bonnet sits Fiat’s own 75bhp transverse mounted MultiJet turbodiesel although buyers do have the option of an 875cc TwinAir petrol unit. Like all Fiat engines this little diesel

is incredibly willing if a little strident. The unit’s ability to rev to the redline, however, is in-keeping with the car’s Italian heritage.

Developing 140lb-ft of torque, the diminutive number of horses is more than made up for by the engine’s ability to pull. Its full strength is immediately on tap because the AWD system can generally transfer it directly to whatever surface the car is crossing.

Get behind the wheel and the Panda surrounds you. The leather bound multi-function steering wheel fills the hands while the controls almost assail the senses, their central location inches away and the elevated gearlever rising to welcome your hand.

Good all round vision allows the driver an uninterrupted view of the world. Apart from the fact that the increased ride height and more aggressive tyres tend to amplify the road and wind noise, the Panda’s temperament is taut and tight, the car responding to the slightest input.

The ‘wheel at each corner’ design bestows excellent handling traits irrespective of the car’s gentle body roll when pushed hard through corners, the overall attitude being predominantly neutral with just the merest hint of oversteer.

Like all Fiats the little diesel is more than willing although more gas means more noise.

Equally, you need to keep the pot stirring if you want to maintain decent momentum.

Regular use of all five gears allows the driver to push on with more enthusiasm than might initially be expected.

WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see page 19

The interior is durable and seats supportive but not the most comfortable over extended journeys.

Square on the inside, the Panda can swallow up to 870 litres of cargo.

A material carrier zips on to the rear of the driver’s seat.

The dashboard is fresh and funky but hard plastics abound.

Controls are big and bold but hard plastics abound.

Yes, it is the handbrake.

Flick the switch to engage the electronic diff lock.

Let the revs die however and you’ll have to start again.

All the while the indicated average fuel consumption fluctuates between high 40s and low 60s. My own tests showed 49mpg over a total of 200 miles, the best reading being 63mpg on the motorway.

Not quite as good as Fiat would have you believe but still working out to around 360 miles per 35l refill.

Around town the Panda is as compact and direct as any supermini out there, slotting through gaps and dancing around back streets with genuine Italian flair. Similarly, out on the open road the car’s size and response to directional prompts prove a smile inducing advantage in most situations, the 80:40 drive distribution keeping the Panda firmly anchored on the desired line.

Flowing along winding roads with consummate selfconfidence and composure it’s off-road where the Panda 4x4 comes alive.

Utilising Fiat’s fully automated AWD system, the

Instrumentation is easier to see during night time motoring.

car crosses tracks and fields with an air of contempt, drive sent instantaneously to the wheels that require the additional grip. And for when things get a little more serious, deploying the ELD or Electronically Locking Diff splits the drive into full time 60:40 drive front to rear.

The Panda is then able to traverse terrain with a style and ability that puts numerous full sized 4x4s to shame. Where the driver has to be careful is in forgetting that ultimately this Fiat is still a car so more severe obstacles need to be avoided, the Panda’s off-road accomplishments often belying the fact.

Its goes more or less without saying that the latest version of the Panda 4x4 continues the model’s well deserved reputation for compact versatility and an ability far in excess of what might initially be anticipated.

The new looks bring the model inline with the rest of the Fiat range while expanding the visual appeal to both new and existing customers.

The 1.3 litre diesel is willing and able.

Add in the car’s quality of build and general feel and once again the new AWD Panda will more than exceed expectations.

The Panda 4x4’s handicap is its maker’s pricing structure.

The entry level TwinAir petrol model will lighten the buyer’s wallet of £13,950, the basic diesel Multijet costing £14,950, while the Panda 4x4 as tested is an eye watering £15,945.

No matter how you look at it, all three variants will relieve the potential driver of a decent lump of pocket change to a degree they could well be tempted to look elsewhere.

On a more positive note, Fiat runs regular offers so keep a lookout for those applicable to the Panda range.

Granted a proper 4x4 won’t come anywhere near this Panda’s frugality or be able to dash around city streets with anything like the same cool composure. But at the current price I’d have to give some serious thought to just how fashionable I needed to look.

The problem is, after you’ve driven the new Panda 4x4 you develop a serious urge to want one, the enjoyment factor being a Fiat accessory you simply can’t put a price on. The irony of the Panda 4x4 is that like every car that carries the Fiat badge, it’s a true driver’s car.

Once you’ve established a genuine relationship you’ll quickly forget you’re behind the wheel of a supermini as each and every mile flows by, the Italian car handling introducing new levels of finesse at each turn of the wheel.

FAST FACTS Model: Fiat Panda 1.3 Multijet 4x4 Price: £15,945 (as tested) Engine: 1248cc, four-cylinder, 75bhp turbodiesel Transmission: Five-speed manual CO2 emissions: 125g/km Combined mpg: 49 (as tested)

C L A S S IC LA N D RO V E R S B R ITISH C L A SSIC S H E R ITA G E M O TO R S P A R TS 1948 to D a te R E TA IL TR A D E E X P O R T SP E C IA L P R O JE C TS R E STO R A TIO N S M A N U FA C TU R IN G

C o untry W o rksho ps,R isega te, N r. S pa lding,L incs P E 11 4E Z

Tel/Fa x: 01775 750223

w w w .british4x4centre.co .uk

APRIL 2014 17

18 APRIL 2014

WWW.WRIGHTSREGISTER.COM

Energy and technology Dryer bales equals bigger bucks under Terravesta bonus scheme

Hypro takes a nozzle approach to spraying

ENERGY crop specialist Terravesta has launched a Barn Bonus scheme to encourage farmers to keep their baled miscanthus dry and under cover.

The new Barn Bonus is now available to all farmers signed up to Terravesta’s 10 year index linked miscanthus growing contracts.

Under the bonus scheme, growers whose miscanthus bales have been stored in a barn and meet the required moisture specification of 16% or less will be rewarded with up to £2 per tonne extra through the scheme.

William Cracroft-Eley, Terravesta chairman, said: “At Terravesta, we place great emphasis on keeping moisture levels to an absolute minimum (ideally 16% or less) in order to secure the best quality crop for end-users and the highest returns possible.

“Demand for miscanthus as a home-grown biomass fuel continues to outstrip supply and as we aim to double annual production again this year, quality remains our top priority.

“The drier the crop, the better the pellets it will produce, which is in everyone’s interests – from the grower right through to the end-user and everyone in between.

“With recent wet weather conditions causing ongoing concern in the farming world, this message is now more important than ever. Growers who can make use of available barn space to shelter their crop will continue to reap the rewards well into the future.

“Terravesta is committed to helping growers get the most out of their miscanthus, and introducing the Barn Bonus scheme is all part of giving them that extra incentive to do just that.”

Growers who keep their bales under cover until October 1 will benefit from £73 per tonne for in-spec crop, while £74 per tonne is available to those who shelter them for longer periods.

In addition to the Barn Bonus scheme, Terravesta is now offering haulage subsidies to farmers in selected regions as part of its ongoing commitment to building a UK-wide grower network. For more information, please visit www.terravesta.com or call 01522 731873.

A SPRAYING system developed by Pentair Hypro makes it possible for operators to change from one nozzle to another at the flick of a switch.

They can change between pesticide and fertiliser nozzles, between nozzles of different sizes to cover a wide range of application rates, and between nozzles with different spray characteristics – such as standard and low drift.

“Selecting the right nozzle as the target or conditions dictate is crucial to get the greatest precision and best performance from agrochemical treatments,” said Pentair Hypro product manager Roger James.

“The parameters that determine the best nozzle will change during the spraying day and even within a field – Duo React allows the most common nozzle changeovers to be made with the flick of a switch, increasing the capability of a single sprayline with none of the drawbacks of a twin line set-up.”

The Hypro Duo React nozzle body combines a single outlet on one side and a four-way turret on the other in a single assembly.

The two piston valves are held securely, closed by a stainless steel spring and opened by air pressure. They operate in the same way as Pentair Hypro’s ProStop valve – already fitted by many sprayer manufacturers.

An air supply on the sprayer operates the two fast-reacting pneumatic valves. Sprayer operators can switch between the turret and the single outlet at any time or use both at the same time. The turret can be rotated manually to select different nozzle combinations.

“Duo React allows operators to set out for a day’s spraying with nozzles of different sizes and types to suit different crops, spray targets and application tasks, and for particular working situations and conditions,” said Roger.

“By combining a single outlet with the familiar manually rotatable turret, we have made the unit compact and lightweight and have kept the cost in check – it represents great value for money considering the new spraying flexibility that it makes available.”

He said a lot of design and engineering effort had gone into making the Duo React body as small as possible to fit different boom designs and without it being exposed to impact and other damage.

Keep your miscanthus bales in a dry barn and – ka-ching! Terravesta will cough up extra cash for them.

Light-up camera gear for big rigs is backwards compatible BY

MARK STONE

MOST of us take reversing our car, van or truck for granted. Equally, it’s now not uncommon for many modern vehicles to come complete with reversing sensors or integrated reversing cameras.

However, for larger trailers, bigger commercials, articulated vehicles and the like, reversing camera systems have rarely been an option due to the complicated nature of their fitment, that is until now.

Fully wireless, able to operate up to four cameras if needs be, waterproof to the IP69K rating and requiring the minimum of fitment, the new CabCam system from Vapormatic is the ideal solution.

The fully wireless CabCam reversing and observation system from Vapormatic.

Able to work on any system from 10v to 32v with a suitable connection usually made via the rear reversing or brake lights or radio, the camera and monitor can communicate and maintain a signal up to 120m apart.

The camera and monitor connect with each other as soon as they’re activated and the camera comes complete with 28 infrared LEDs that provide 25m of illumination and a 120 degree field of view.

Similarly, the 6in x 3½in colour back light monitor offers the driver an excellent clear image and more importantly an instant visual reference for what’s directly behind and, if more than one camera has been installed, along each side of the vehicle.

The end result is no more bland spots, a significant increase in safety and a reduction in the inevitable rear door dents and expensive collisions.

Fully adjustable and able to be positioned exactly where required, the CabCam costs £418.60 + VAT and is available from all Vapormatic outlets.

Alternatively, you can visit www.vapormatic.com for full technical specifications or call 01392 684000.

“Feedback from in-depth market research in Britain and France indicated that farmers are looking for a low-cost and simple-to-use nozzle switching system,” said Roger. “Our engineers rose to the challenge – sprayer manufacturers can now offer a compact and simple unit at an acceptable cost.”

He said providing a permanent home for a liquid fertiliser dribble bar was one of the most common reasons for having a second sprayline on a new sprayer; it saves having to remove the dribble bars to go spraying.

“With Duo React, the dribble bar can be fitted to the body’s single outlet and spray nozzles to the four-way turret; the operator then simply switches between fertiliser and pesticide application from the cab as required,” he said.

“For those who prefer a dribble cap, the Duo React body offers a wider range of application rates than a single outlet nozzle body. For example, fitting red (04) and grey (06) Hypro ESI six-stream fertiliser nozzles provides a fivefold application rate range using each nozzle singly and then both together.

“Careful selection of the nozzle combination can provide a tailor-made pairing to suit the required application rate and cope with whatever range the crop requires. Depending on the sprayer model, this can be automated to work from GPS mapped rate recommendations.”

Switching between a conventional flat fan and a low-drift air-induction nozzle was the most likely scenario for crop spraying applications, he said.

For more details visit www.hypro-eu.com

The Hypro Duo React is a compact twin-valve nozzle body that provides a twin-line option on a single sprayline.

Fitting two Hypro ESI six-stream fertiliser nozzles to the Duo React can provide a five-fold spread of application rates – with a Guardian Air pesticide nozzle waiting in the wings on the fourway turret.

Changing over from fertiliser to pesticide spraying with the flick of a switch by fitting a Hypro ESI six-stream fertiliser nozzle (left) and a Guardian Air low-drift nozzle to the Duo React body.

Moving between crops requiring different application techniques is straightforward with the Hypro Duo React body, fitted here with a VPTech angled flat fan (left) and a Guardian Air low drift nozzle.

Leica’s enhanced system has a big Plus LEICA Geosystems has announced the successor to its Leica SteerDirect ES – the not-in-any-way similarly named Leica SteerDirect ES Plus.

The electric steering system is intended to give farmers an “independent steering solution to improve accuracy by diminishing skips and overlaps, saving fuel, fertilizer, chemicals, and reducing operator fatigue”.

The Leica SteerDirect ES

Plus can be used to add assisted steering on most tractor, sprayer and harvester models.

Once installed, the electromechanical drive unit latches on and off effortlessly enabling quick and simple transfer across multiple vehicles via the innovative switch kit.

Installation does not require removal or replacement of the steering wheel.

The new electric steering system features several improvements. It has a builtin encoder for more accurate steering and an upgraded, more powerful electric motor that provides superior steering performance.

The steering system comes with simplified cabling and a separate engage switch to allow easier operation. It is compatible with the Leica mojo3D guidance system and the Leica mojoXact Plus.

The imaginatively named Leica SteerDirect ES Plus.

For more information about Leica Geosystems Agriculture products visit www.AgGuidance.com.

Kelvin totally pumped about additives and preservatives

Pump up the volume! The Silaspray SP Standard-Maxi pump increases the additives applied to a forage crop.

A HIGH-specification pump has been engineered and manufactured in Germany to deliver silage additive consistently and evenly on to a forage crop as it is picked up or harvested.

Available exclusively through forage specialist Kelvin Cave Ltd, the Silaspray SP Standard-Maxi can be fitted to forage wagons, balers and forage harvesters – either selfpropelled or trailed.

A key feature of the pump is its ability to deliver high volumes of additive.

“The main problem in the UK is that the applicators fitted to self-propelled foragers can only apply around one litre of additive per tonne of forage and only cope with water-based

additives,” said managing director Kelvin Cave.

“However, the Silaspray SP Standard-Maxi is designed to deal with liquid biological or chemical silage additives and can deliver them at rates of up to 550 litres per hour, equivalent to up to five litres per tonne of forage.”

This high volume delivery is considered to be important in today’s additive market, in which some of the highest volume products have been proven to deliver the best performance in terms of forage preservation.

This applies in particular to the food-grade preservative type products, which are based on ingredients such as sodium nitrite, sodium benzoate and potassium sorbate.

Visit www.kelvincave.com

APRIL 2014 19

WWW.WRIGHTSREGISTER.COM

Farmer skewered by his own tractor fork gets rescued FIREFIGHTERS were faced with an extraordinary rescue operation when a farmer accidentally impaled himself on a 45cm long tractor fork.

The 4cm thick spike had gone straight through the right side of Graham Heatley’s lower back, across his abdomen and was sticking out of the left side of his stomach.

He had been removing black plastic from a three-quarter tonne hay bale on his Shropshire beef cattle farm in the UK with his back to the Deutz 110hp tractor when it rolled forward and slowly skewered him, pinning him to the hay.

Rescued farmer Graham Heatley, right, thanks Ellesmere crew manager John Deakin.

“I don’t think I applied the handbrake properly on the tractor because I began to feel the fork going into me and there was nothing I could do about it,” he said.

“I could feel the prong going through my back and into the hay so I was trapped.”

Neighbours heard his shouts for help and Henry Rook, 23, managed to get through to the emergency services on his third attempt. His mobile was the only one working and was left with only a small amount of battery life, thanks to an all day electricity blackout.

On call firefighters from Shropshire Fire and Rescue Service arrived at The Grange Farm, Ellesmere, as paramedic Kerry Hemas and a doctor from the county air ambulance were administering morphine to the 52-year-old farmer.

“I liaised with the doctor to find out how much time we had to get him out,” said John Deakin, crew manager at Ellesmere Fire Station.

“Our initial thoughts were to cut the spike off but it was made of thick and hardened steel and our Holmatro cutting gear wouldn’t get through it. We considered using acetylene to cut it but that wouldn’t have worked because the heat would transfer along the metal spike and into Graham’s body.

“The only way was to take the prong off the machine and leave it inside Graham while he was taken to hospital.”

Working closely with the doctor and ambulance crew, four firefighters held the farmer’s body steady while colleagues used WD40 to loosen a nut, clamped it and managed to hammer the prong free.

“We were talking to Graham throughout telling him what we were doing and he was quite

A happy ending: air ambulance paramedic Kerry Hemas with farmer Graham Heatley holding the spike that speared him with firefighter John Deakin at the farm at The Grange, Lyneal, near Ellesmere, Shropshire.

amazing. We had to tap the bar with a hammer to free it and Graham knew about that,” said John, whose full time job is as a line manager for a robotics milking firm.

With the spike sticking out of his body, the badly injured man was carefully laid on his side by firefighters who put him on to a stretcher.

Within an hour of their arrival, the farmer was being flown to the University Hospital of North Staffordshire where surgeons were waiting to operate to remove the spike which had narrowly missed piercing arteries and organs.

A second air ambulance had arrived at the rescue scene with pints of blood which the medical team feared they would need.

“It was a very pleasing and successful outcome to a quite unusual and difficult incident,” added John, with 30 years experience as an on call firefighter.

Graham Heatley is recovering well from his ordeal.

Shropshire firefighter John Deakin inspects the steel spikes on the hay baler which pierced straight through farmer Graham Heatley in a gruesome farm accident.

20 APRIL 2014

WWW.WRIGHTSREGISTER.COM

Plant and Machinery Fresh loader duo are the cream of Cat TWO new Cat compact wheel loaders have been launched – the 910K, a new model in the range, and the 914K, which replaces both 914G2 and IT14G2 models.

They both feature the Cat C3.8B engine, longitudinally mounted to facilitate routine

maintenance and to provide improved rearward visibility. A new, single-plane cooling system uses a hydraulically driven fan or an optional Cat Demand Fan that operates only as required.

An ECO mode regulates the engine’s high idle, the idea

P ELL P L ANT H IRE L TD PELL PLANT HIRE LTD

Groundworks & Construction, Civil Engineering Contractors t. 01754 881231 m . 07768 9 43722

Lym d a le Cro ftLa ne, Cro ft, Sk egnes s , Linc s PE2 4 4 PF

A . G ric e & S on (a d ivis io n o f Pell Pla ntHire Ltd )

•L a n d d ra in a ge •Je ttin g •Ditc h m a in te n a n c e •L a ke s & P on d s ESTABLISHED O VER 50 YEARS AN Y REG IO N C O N SIDERED

Land D rainage Sp ec ialists

being to save fuel and lower sound levels without compromising machine performance, while also effectively controlling downhill braking.

Refinements in the Cat Hystat system allow a 25mph (40kph) top speed for the new machines, and a switch in the right console provides on-thego shifting between two speed ranges. The electronically controlled hydrostatic transmission delivers maximum pull in both ranges and automatically regulates speed during downhill travel.

Refinements in the cab design for 910K and 914K include a better view of the work tool – resulting from the

Stepping it up with the Cat 910K.

new loader-linkage design and compact hydraulic-hose routing – as well as control-layout modifications.

The Deluxe cab features two side-entry doors, electrohydraulic joystick, suspended pedals, tilt steering wheel, airsuspended and heated seat and optional security keypad. The multi-function loader-control joystick also incorporates transmission and differentiallock controls and accommodates controls for two-, three-, and four-valve hydraulic systems, including proportional control of auxiliary circuits.

The new machines are available with an Integrated tool carrier coupler, compatible with legacy IT Cat work tools as well as the Cat ISO coupler, designed to work with a full range of Cat Performance Series buckets, optimised ISO pallet forks and certain competitive attachments.

Cat Performance Series buckets feature a large throat opening, long floor, curved side bars, rack-back and efficient strike plane to assist operators in loading faster, to capacity, while retaining material during

The 914K shows off its high-lift boom.

travel. High-lift booms provide 14in (335mm) of added clearance.

Two new optional electronics packages are available for the new 910K and 914K – the Road Feature and Load Feature packs. Each includes a new electronic, soft-touch keypad for convenient control of most functions.

The Road Feature pack includes a ride control system that cushions boom cylinders when the machine is travelling with a load in rough terrain, smoothing the ride and retaining material. Also, a variable-speed creeper control allows ground speed adjustment independently of engine speed for precise control of continuous-operation work tools, such as snow blowers and brooms.

An electronic throttle lock automatically maintains (or resumes) a set engine speed to allow work tools to function at a high RPM for maximum hydraulic power.

Also included are an implement-modulation system for adjusting hydraulic response to one of three levels and a hystat aggressiveness control that provides three levels of shifting smoothness and directionalchange response. These features let operators set the machine to their preferences or to job-site conditions.

The Load Feature pack includes the electronic throttle lock, implement-modulation

system and hystat aggressiveness control, while also incorporating additional features to assist operators during the loading cycle: rimpull control; return to dig; and lift kickout.

Rimpull control reduces tyre slip in poor underfoot conditions. The operator can pick from three settings to adjust power at the wheels to working conditions: 60, 80 or 100% of the hystat system’s power. Also, the K Series brake pedal functions as an inching pedal during the first half of its stroke, decelerating the machine hydrostatically.

Return to dig automatically repositions the bucket for the next loading cycle when the operator places the joystick lever in the bucket rack-back detent after dumping into a truck or hopper. This feature is adjusted at the tilt cylinder.

Lift kickout is for when the machine is working in lowoverhead situations. After the kickout height of the loader arms has been mechanically set via an adjustable bracket and magnetic sensor near a linkage-pin, the loader arms will stop at that pre-determined height when the operator depresses the lift kickout button and pulls the joystick into its lift detent.

The Cat security system now integrates keypad access for engine starting, allowing protected digital access to the ignition without a specially designed key.

WWW.WRIGHTSREGISTER.COM

Only 79p an issue when you subscribe – see page 19

Sumo launches its own fleet of heavy haulers EQUIPMENT manufacturer Sumo has decided that it needs its own fleet of trucks to deliver products to customers direct from its factory.

Sumo Heavy Haulage can carry any load up to 26,000kg with a choice of trailers that can adapt to the needs of any load. The fleet consists of extender semi low-loaders and standard machine carriers.

The semi low-loaders have a standard main deck length of 9.2m that can be extended to a main deck length of 15.5m. These trailers also have a low approach angle of 10.4 degrees so that even the very lowest machines can be loaded without causing damage to the machine or the trailer.

The trailers also feature a special build that was designed to Sumo’s specification, and are fitted with maximum lashing points down each side and also inboard of the trailer deck with lashings down the centre of the trailer.

This gives maximum lashing options when carrying all types of machinery so that they are carried in the most secure way possible at all times.

Sumo Heavy Haulage also operates

standard machinery carriers, which have a main deck area of 9m on the main deck with 4.3m on the neck deck. Some of these trailers also have the maximum lashing points possible and come equipped with all the necessary wide load equipment required by UK and European law.

“We are experienced in machinery movements across the UK and our aim is to make sure your machines arrive at their destination on time and in despatch condition,” said Sumo transport manager Jeremy Desmond.

“Machinery, plant, long or wide loads can be catered for, and all paperwork can be handled by our transport department, allowing you to run your business while we make all the necessary arrangements to ensure that your loads fully comply with UK law.

“We operate a modern and well-maintained fleet which has seen significant investment in the latest, most efficient and environmentally friendly equipment.”

Jeremy has 11 years of driving experience under his belt with both national and international mileages. He has a full HGV C+E

Shifting the heavy stuff – Sumo transport manager Jeremy Desmond.

licence and also holds a national and international CPC qualification.

“With our experience, dedication and commitment to the machinery industry, our customers can be assured of stress-free movement of goods from A to B with an industry-leading UK company.

“We also realise company image is very important to our customers and our trucks will always be presented in a clean, tidy and well-maintained manner – as well as our drivers who are in Sumo heavy haulage company uniform at all times.”

Mole Valley farms out windscreen repair service

Sheets of safety glass can be cut to fit unusual requirements in the field

by National Windscreens technicians.

A WINDSCREEN replacement service for agricultural vehicles run by National Windscreens has won praise from some of the UK’s leading farming associations, including Mole Valley Farmers.

Mole Valley, based in the south west, uses the National Windscreens service for its own fleet and recommends the service to its members.

As operator of the largest UK fitting centre network in its field, National Windscreens holds stocks of the most common windscreens used in agricultural machinery.

It also has access to all nonstandard varieties through relationships with manufacturers including John Deere, Massey Ferguson and CLAAS. The company’s specialist glazing technicians can cut and fit flat laminated safety glass and polycarb on-site for bespoke requirements.

Mole Valley company secretary Andrew Chapple said: “None of our members wants to delay harvesting on a sunny day because of a damaged windscreen – farmers have windows of opportunity in each season, so even the shortest waiting times can impact on their operations.

“Our partnership with National Windscreens means our members have one less thing to worry about.”

MVF members can access National Windscreens’ services directly through a dedicated free phone number which puts callers straight through to the company’s South West contact centre.

MVF Plus members can also claim a £15 Mole Valley Farmers voucher for booking agricultural glazing repairs with National Windscreens.

MVF Plus scheme manager David Quance said: “MVF was established to ensure farm businesses were able to buy quality products at competitive prices and that other businesses did not profiteer at their expense – that ethos remains true today.”

National Windscreens’ specialist glazing division can replace windscreens in agricultural machinery of all sizes – from tractors and forklift trucks to combine harvesters.

Specially trained glazing technicians use Sumo lifting equipment which enables them to lift large and heavy windscreens without the need for manual handling.

As well as offering a direct service, the company works with a number of well-known farm insurance specialists, ensuring farmers can access its services through their broker or insurer if necessary. National Windscreens highlighted its specialist glazing services for agricultural machinery at the Devon Show last year.

For more information visit www.nationalwindscreens.co.uk

APRIL 2014 21

Sports and hobbies

‘The young coppers were townies – easier to hoodwink but they would always do things by the book’

In the second part of his interview with an 84-year-old ex-poacher named ‘Sid’, Chas Baird asks about his poaching equipment and what’s likely to make a poacher’s life that little bit more difficult.

BACK to the tales of the old poacher! I wanted to know more about what made Sid, the old poacher from deep in rural Worcestershire, tick.

“I suppose it started when I was still very young – a gang of us young lads would go and hunt with catapults. You didn’t get a hell of a lot but it was good fun.

I used to beat for the first couple of seasons before the war – a lot of lads who poached did – no better way of getting to know the layout of a lot of different places, and getting paid for it.

“The war stopped pretty well all the organised shoots but afterwards I went back to it and I was senior beater on two of the local shoots till I retired a few years ago.”

I asked Sid to tell me about some of the methods he used: he was a bit reluctant but finally caved in.

“A good dog is one of the best ways – if anybody asks you are just out for a walk. When the common round here was alive with rabbits, this was before the myxomatosis, I used to go out morning and evening with a pair of lurchers and I very rarely came back empty handed. You see, it wasn’t actually legal to take rabbits on common land but it was very difficult to prosecute anyone.

“The catapult can be very effective. It’s quiet, easily carried and concealed and if you have to ditch it you don’t lose a lot. Many of the ways you hear talked about, snares, traps, dunce’s caps, raisins and whisky and that sort of thing will work but they mean hanging around and that can lead to trouble.”

I wanted to know about his use of shotguns and rifles.

“I had my dad’s old 12 bore hammer gun from when I was big enough to use it, my uncle gave me his little folding .410 before he went off in the army – lovely little thing that was; fitted under your coat and very accurate. I had a silenced .22 for a while but when they brought all the restrictions in after those shootings in Hungerford in the 1980s. I gave the lot away – too much bother.

“The thing was I never carried a gun when I went out. With any of the ways I used for poaching you just might talk yourself out of bother – but get caught with a gun and it was armed trespass if the police felt like charging you.

“My son bought me one of these air rifles that you fill with a pump. I take my grandsons rabbiting with that, it’s almost silent, very light and really accurate. I could have done with that a few years ago. Before you ask – I have permission for the land we use!”

I asked what the local police thought and did about his activities.

“When we had a village bobby and the sergeant was 10 miles away I had no bother. The local lad tended to know who was at it – whether he tried to prove it or not really depended on how you went about things. If you were too obvious about it, well, that was your own stupidity.

“We had three local cops in my time and only one of them guessed I was at it. He never proved it and in fairness I don’t think he tried too hard. Once they took the village bobbies away and they were coming out from Worcester or Tewkesbury it was a bit of a mixed blessing.

“You see, these were mostly young coppers, townies with no idea about the countryside, so they were easier to hoodwink.

Against that, they would always go by the book, so it would be a lot harder to talk your way out if they did catch you red handed.”

I asked Sid what he thought made a poacher’s life more difficult.

“If all the farmers and landowners make sure everyone who shoots or otherwise works the land has written permission, if the land is well keepered and breeding pens and other places where game birds congregate are constantly checked – that’s not good news.

“If you want to stop illegal coursing then take steps to keep the hare and rabbit population within bounds. If the land is known to be alive with hares in particular then someone is almost certain to have a go. Above all, be on good terms with local people. Things always get seen in the countryside but whether the farmer or landowner hears about is a different matter.”

Until next time, keep the faith!

22 APRIL 2014

WWW.WRIGHTSREGISTER.COM

JCB man John dies aged 87 TRIBUTES have been paid to one of the first people to work at JCB who has died at the age of 87.

John Wheeldon was the sixth person recruited by company founder Joseph Cyril Bamford in August 1948.

He went on to become the company’s first-ever demonstrator, before going on to set up JCB’s training school and later becoming visits manager.

He retired in 1990 after 42 years’ service, later returning part-time as a tour guide.

Father-of-two John, formerly of Combridge, near Rocester and latterly of Uttoxeter, also started a family tradition of working for JCB. His daughter Jane Staley is JCB chairman, Lord Bamford’s, personal assistant and this month herself marks 50 years’ service with the company.

Lord Bamford was taught how to drive JCB machines by John. He said: “I knew John from when I was a very young child because he was one of the first people my father employed.

John Wheeldon at the controls of a JCB machine. He was one of JCB’s first customers as well as one of its first employees.

JCB founder Joseph Cyril Bamford is carried aloft by John Wheeldon, right, and colleague Bill Hirst after the announcement of a £250,000 employee bonus in January 1964.

“He was a true gentleman and a very loyal employee. My sympathies go out to Jane and all the family at what is a very sad time.”

Before becoming one of JCB’s first employees, John Wheeldon was one of JCB’s first customers.

He worked on farms between Uttoxeter and Alton before he joined the company and when he decided to buy himself a screw-tipping trailer in 1946, he purchased one from Mr Bamford.

In an interview in 1995 to mark JCB’s 50th anniversary, John Wheeldon said: “I was one of Mr Bamford’s earliest customers and after I bought one of his screw-tipping trailers, he would send other customers to see me to understand the capabilities of his products.

“When I joined JCB, Mr Bamford said I could work as a general hand but I would have to learn how to weld and he would teach me, which he did.”

The great-grandfather died at his home.

Pole position for Pöttinger’s drill MACHINERY manufacturer Pöttinger has been awarded a gold medal for its Aerosem pneumatic seed drill.

The Austrian company, which has a UK base at Corby in Northamptonshire, was presented with the medal at the Polagra Premiery Agricultural Fair at Poznan in Poland.

It was, Pöttinger says, the first time that a fair in Eastern Europe has presented awards for agricultural machinery.

The Aerosem impressed judges with its Precision Combi Seeding and Intelligent Distributor System innovations.

The drill is available in working widths of three and four metres and is typically mounted over the rear roller of tillage implement, such as a Fox compact combo, Lion power harrow or Terradisc multiline disc harrow. The centre of gravity of the compact machine is located close to the tractor.

The Aerosem 3002’s seed hopper has a volume of 1250 litres and an opening with a width of 2.2m making it easier to fill. An agitator is designed to ensure uniform flow of seed material to the metering system at all times.

The machine is also equipped with a hydraulic blower drive system that produces 4000rpm with 25 litres of oil. Oil

consumption is minimised and precisely adjusted to the required air flowrate. The blower is extremely smooth running thanks to its rugged, thick-walled aluminium casing.

The metering system enables seed material to be drilled at between 1.5kg and 340kg at driving speeds of up to 7.5mph.

Depending on the type of seed, the metering wheels are designed to be quickly and easily replaced. Calibration is also a quick and easy process, Pöttinger says. A calibration pan on rails is inserted from the side.

Mechanical or electric versions of the metering drive system are available.

Tramline switching is included as standard equipment.

The mechanical metering system is driven by a land wheel on the left-hand side of the machine. The land wheel is positioned within the working width of 3m. The infinitely variable oil-submerged transmission is located on the left next to the platform. The calibration test is performed using a hand crank.

A hydraulic land wheel lifting system is available as an option. The straightforward and intuitive Compass control terminal is used to operate the tramline system, included as standard, using back-lit keys and graphic display.

The gold medal-winning Pöttinger Aerosem in action.

Edyta Dabrowska and Juliusz Tyrakowski of Pöttinger with their company’s gold medal for the Aerosem.

The Compass control terminal also offers calibration test, speed indicator, partial and total hectare counter, metering shaft and seed hopper level indicator functions.

The electric metering drive version offers infinitely variable seed flowrate adjustment including a seed library using the Power Control terminal or the tractor’s isobus. Calibration is performed conveniently at the press of a button so that the metering system automatically feeds the correct amount into the calibration tray. The speed signal for metering is provided by a DGPS sensor.

Additional advantages include priming and that no land wheel projects to the rear of the machine. The metering flowrate is also reduced automatically when using tramlines or half-width drilling.

The Aerosem is available with three-row trailed coulters, two-row single-disc coulters or two-row dual disc coulters and can be adapted to any operating conditions.

WWW.WRIGHTSREGISTER.COM

APRIL 2014 23

WrightsClassifieds 24 APRIL 2014

WWW.WRIGHTSREGISTER.COM

To advertise tel: 01507 524004 fax 01507 529499 ATV

SPECIALISIN G IN AR CTIC CAT Q UAD B IK ES N ew , Ex D em o a nd Sec o nd Ha nd B ik es a va ila b le

BUILDINGS ALL N EW B IK ES CO M E W ITH 2 YEAR S W AR R AN TY N EW D IESELS IN ST O C K , O FFER IN G EC O N O M IC AL FU EL C O N SU M P T IO N .

R IN G N O W FO R C O M P ET IT IV E P R IC ES.

tel: 01327 261023 m o b : 07775 684401 hw hite@ a fm a c hinery.c o .u k w w w .pjs ervic es .eu

W e s ell a fu ll ra nge o f Co nc eptM o w ers a nd Po w erHa rro w s W e a ls o s u pply a fu ll ra nge o f Ac c es s o ries fo rQ u a d B ik es inc lu d ing: A llA rcticCatQuad Bike Accessories•M ounted and Trailed S prayers,M ow ers,Flailand Rotary •Trailersetc.

Priors Marston Road | Hellidon | Daventry | NN11 6GG

BUILDINGS

APRIL 2014 25

WWW.WRIGHTSREGISTER.COM

B. POPE & Sons Ltd. Cattle Buildings Grain Stores Potato Stores G.P. Buildings

STEEL FRAMED BUILDINGS AND CLADDING

Workshops Industrial Units Extensions Refurbishment & Alterations

Design, Fabrication, Erection, Cladding or Supply Only

Church Farm Yard Sempringham Sleaford Lincolnshire NG34 0LU Tel/Fax 01529 241493 - website : www.bpopeandsons.co.uk - email : sales@bpopeandsons.co.uk

•B AR N S R E-CLAD •STEEL CLAD D IN G SUPPLIED Box Profile Straight C orrugated Straight & C urved

Tel.01366 382294 Fax 01366 382878 Eastern C ounties H um ber to the Tham es

B U S S EN S & VIGR AS S

ROOFING & CLADDING SHEETS PLASTISOL - POLYESTER INSULATION - PURLINS METRE COVER “ONDULINE STOCKISTS”

DIRECT FROM THE MANUFACTURER

Unit 6, Capelhendre Ind. Estate, Nr. Ammanford, Dyfed SA18 3SJ

Telephone: 01269 831869 Fax: 01269 831870

26 APRIL 2014

WWW.WRIGHTSREGISTER.COM

BUILDINGS

GENERATORS

MAX LAST CONTAINERS CONTAINERS FOR SALE OR HIRE

new and secondhand

GENERATORS ALL SIZES OF SHIPPING STORAGE AND REFRIGERATED CONTAINERS Tel: 01394 387728 Fax: 01394 388826 Mobile: 07860 413994

user@woodbridge41.fsnet.co.uk Nationwide Service

CONTRACTORS

LIVESTOCK Ford e ta ils te l:

01529 455280

LIVESTOCK

S P E CIA L IS TS FO R M IL L A N D M IXE R U N ITS • • • •

FITTED W ITH HA M M ER OR ROLLER M ILLS BULK FEED TRA ILERS A LL TY PES OF GRA IN & M ETERING BINS AUGERS & CONVEYORS

EQ U IPM EN T TA ILO R M A D E TO Y O U R R EQ U IR EM EN TS O VER 50 YEARS O F EXPERIEN C E

APRIL 2014 27

WWW.WRIGHTSREGISTER.COM

LIVESTOCK

U T T L E Y IN G H A M & C O LT D D . W . Ferniho ugh

Bulk Feed Silos Transported

MOORE’S YARD, HEMINGBY LANE, HORNCASTLE, LINCS LN9 5PN

New & Used M adeto Orderc/w Feeding System s Bobcatcleaning outservices

• BULK FEED BINS • • PIG & POULTRY FEED SYSTEMS • • DRINKER SYSTEMS •

Tel/Fa x: 01386 792967 M o bile: 07860 558674

Contact:

trish_ferniho ugh@ ho tm a il.co m sa les@ uttleyingha m .co .uk

K. BARK 07957 568 954, R. MOORE 07957 568 955 TEL: 01507 522386 FAX: 01507 522061

www.valelivestock.co.uk

MACHINERY FOR SALE MACHINERY FOR SALE C LUTCHES

CLUTCHES

and m ore CLUTCHES Also FLY W

HEELS

Allm akes-TRACTORS,

COM BINES and TRUCK S

01724 855711 w w w .clutchnet.co.uk w w w .clutch-m anufacturer.co.uk

BRO W N S O F LI VERS E DG E FOR

NEW & S/H BELARUS TRACTORS

spare parts also available

www.wrightsregister.com

Tel: 01924 404534

MACHINERY FOR SALE

28 APRIL 2014

WWW.WRIGHTSREGISTER.COM

MACHINERY FOR SALE

WWW.WRIGHTSREGISTER.COM

APRIL 2014 29

30 APRIL 2014

WWW.WRIGHTSREGISTER.COM

MACHINERY FOR SALE

To advertise call Sue or Carol on

01507 524004

WWW.WRIGHTSREGISTER.COM

APRIL 2014 31

32 APRIL 2014

WWW.WRIGHTSREGISTER.COM

MACHINERY FOR SALE

SERVICES

P.V. DOBSON & SONS New Perkins Engines and Spares New 3 cyl to suit MF/JCB/Leyland New 4 cyl to suit MF/JCB/Case/Manitou etc New 6 cyl to suit MF/JCB. 200+ other new engines in stock Inc. industrial spec turbo and standard

Next day nationwide delivery service from £35.00 Credit cards accepted P.V. Dobson & Sons (ask for Ryan) Levens, Kendal. LA8 8PG Tel: 01539 560833 Fax: 01539 560675 e-mail: parts@pvdobson.com View engines on www.pvdobson.com Mobile: 07843 314 695 *Prices subject to VAT Wrights Farming Register covering the heart of England’s farming community from the Thames Valley to the Scottish Borders

POTATOES

COMPRESSORS For new and reconditioned air compressors and associated equipment contact the experts

T.A. INDUSTRIES SERVICES

01427 668436

TOWNSON TRACTORS LTD Stocking an extensive range of Agricultural Tractor & Machinery Parts at competitive prices.

We are also the main distributors for KAB Seating, stocking a full range of replacement seating for tractors, handlers & diggers.

Tel: 01729 850374 Email: chris@townsontractors.co.uk www.townsonseshop.co.uk or www.townsontractors.co.uk

SPRAYERS & SPREADERS

APRIL 2014 33

WWW.WRIGHTSREGISTER.COM

SERVICES

TRAILERS

SPRAYERS & SPREADERS

TYRES

View the broker service online at www.wrightsregister.com SPRAYERS & SPREADERS

WANTED

TO ADVERTISE GIVE CAROL A CALL ON 01507 529414

34 APRIL 2014

WWW.WRIGHTSREGISTER.COM

1

AUGERS

S7028 BRICE BAKER 20ft Transmatic 4” Flight fitted with cleaner mesh on Upper tube. 3 Phase motor, winch up & down and 2 Wheels. Good condition £375 % Shaun 07850 978188 S6605 RECO Recomatic 6” Transmatic auger appx 28ft long c\w 3 phase motor & armered cable. Has Double castor wheels each side to move. Kept inside Good condition £500 % Shaun 07850 978188 C6815 DISCHARGE Auger to suit outdoor grain silo unloading, straight type fits in tube below silo floor, 6” diameter all galvanised 16’ long to suit 24’ diameter round silo or similar, 3 phase 5hp electric motor drive at discharge end Good condition £395 % Chris C 01926 338639 C6854 ASTWELL new hopper box to fit inlet end of a 4.5” auger, includes entry grille. Reco 10’6” long Recoflite straight auger 4.5” diameter with single phase motor Good condition poa % Chris C 01926 338639 S7117 34 Ft 4.5” Transmatic auger c\w 3 phase motor and cleaning section in First part. 2 small wheels. Good condition £450 % Shaun 07850 978188 C6768 ASTWELL Straight 20 ft long 6” diameter galvanised grain auger, bottom inlet slide with handle, 3 phase 5hp motor at discharge end, done little work as paint still on auger flights Very Good condition £450 % Chris C 01926 338639 S6557 Transmatic 36Ft 6” auger c\w 5HP 3 phase motor, Galvanised tubes on adjustable stand with 2 wheels. Stored inside Good condition £600 % Shaun 07850 978188

2

BALERS AND BALE HANDLING

C6860 MASSEY FERGUSON 828 Round balers, choice of 2 with machine for spares, 6 belt type can make up to 6 foot high bale, 2m wide pick up, one machine has net wrap system, spare machine has rubber gathering wheels, both machines in full working order - same baler as Greenland Vicon model. All dry stored Good condition poa % Chris C 01926 338639 S7104 1996 HESSTON 4900 Big Square baler. 2m pick up, 28 -26L tyres, Half tailgate ejector. Cleaned down and waxoiled inside. Under 80,000 bales. Very Good condition £11,000 % Shaun 07850 978188 S6993 WELGAR RP 435 Variable diameter Round baler (3 - 5ft 6” by 4ft) 2.1m Pick up with Rotofeed, Side feed augers & chopper. Nett Wrap & Bale Ejector.Good Example of this market leader. Very Good condition £13,500 % Shaun 07850 978188 S7048 2007 WELGAR RP 435 Variable chamber round baler makes bales 1 - 1.6m diameter. Only Baled 12500 bales. Fitted wide pick up with crop press roller and Feed rotor. Nett wrap with loading cradle.

380/55 R17 tyres. Unmarked condition stored inside .Ask any user how well these bale. Excellent condition £9,750 % Shaun 07850 978188 C6686 NEW HOLLAND D1000 Big Square baler, 1996 model in red & yellow paintwork (one of last made with all later secification), makes 60cm x 90cm bales (2’ x 3’), 2m wide pick-up with feed augers & rubber tyred wheels, 4 knotter system with central lube system & twine box carriers either side, hydraulic bale density control, all good pto drive with wide angle coupling, 16.5L16.1 tyres, road lights, all good straight panelwork, done approx 95000 bales Good condition poa % Chris C 01926 338639 C6726 LAWRENCE EDWARDS Supa Pac static bale wrapper, tractor linkage mounted with remote control requires hydraulic spool valves to operate machine, 4 belt table with tilt ram, 500mm plastic wrap spool facility, unused & dry stored needs turntable operation repair Good condition £850 % Chris C 01926 338639 W3512 WELGAR

AP630 Serial Number: 1135-04-5199. Mid 1990’s. In working order and will go straight to work. Has been barn stored and the paint is generally good for its age. Baled an average of approx 7000 bales per year for the last 10 years. Operators manual and parts list for the baler. £5,450 % Chris W 01787 247286 S6706 INTERNATIONAL 440 Convention small square baler, well maintained and ready to work. Good condition £1,000 % Shaun 07850 978188 S6208 WELGAR RP150 5ft by 4ft Belted round baler c\w mechanical twine tying.

Fittted Road lights. Stored inside. Average condition £950 % Shaun 07850 978188 C6864 BROWNS Tipper big bale accumulator for operation behind big square bale to deposit 2 or 3 bales together on tilting bed, currently fitted to New Holland BB940 (800 x 900 bale) & used for 2 bales, pair pivoting castor wheels below fitted 7.50-10 tyres, hydraulic operation from tractor with in-cab control box. Baler drawbar/brackets & pipework complete, all straight in working order last used 2011 Good condition £1,150 % Chris C 01926 338639 C6803 KVERNELAND Volac Silawrap 7510 round bale wrapper, trailed machine with self loading arm, 4 belt turntable fitted 750mm wrap spool, in cab cable control spool valves with bale counter, rear bale fall breaker mat, 11.0/65-12 tyres, last used 2012 Good condition £1,575 % Chris C 01926 338639 S6708 1992 WELGAR AP 630 Conventional small square baler with 68” pick up and hydraulic drawbar offset ram. Tidy straight baler .Stored inside but has slightly faded paint. Good condition % Shaun 07850 978188 S7034 BAMFORD BL 59 Conventional Square baler c\w 5ft Pick up. Good tyres, All staright but average paint (no rot) plus bale sledge Average condition £350 % Shaun 07850 978188 C6934 KVERNELAND 806 Straw bale chopper/bedder (Kidd design), linkage mounted pto drive with front pneumatic support wheels, twin outlets (one each side), cutting blades on central rotating chopper bed in tub base can have additional knives fitted, round tub size 1.88m diameter suits round, big square or small bales Good condition £1,250 % Chris C 01926 338639

APRIL 2014 35

• See also the wanted section and read the buying/selling details before calling

WWW.WRIGHTSREGISTER.COM

W3513 MCCONNEL Bale Packer Mcconnel bale packer makes packs of 16 or 20 convential bales, trailed unit with drawbar and chute system, to fit behind convential baler, used in 2012 season.Cherry Products Bale Gripper included!

Very Good condition £8,000 % ChrisW 01787 247286 W3515 2003WELGARAP830 Dealer serviced every year. With hydraulic steel pipes and hydraulic draw at the back and for bale sledge. Hydraulic pick up and hydraulic draw bar, lights and wide angle PTO.Has done 7000 bales per year Very Good condition £9,350 % ChrisW 01787 247286 S7100 0190 MF 2170 190 by 120 Big Baler Ist used July 2011 and only baled 16200 bales. Fitted 2.25m pick up with end wheels, Knotter blowers and 700/50 - 22.5 tyres. Unmarked Excellent condition £53,000 % Shaun 07850 978188

3

BEET HARVESTING EQUIPMENT

S6659 STANHAY Rocleaner R60 Hydraulic Folding Interow how configured for 8 rows but could be extended. Will Mount on Front or back of tractor Good condition £1,000 % Shaun 07850 978188 S6873 RATIONAL Nova Hydro 3 Row Trailed tanker beet harvester with front mounted offset topper, feeler & knive crowning, self steering lifting, opel wheels, 2 cleaning turbines steering drawbar & steerage disc. Adjustable axles with 14.9/80 - 24 tyres with 70% tread. Good sized tank appx 4 - 5 ton. Average condition £1,500 % Shaun 07850 978188 C6847 TODD Hestair Beet Cleaner loader with end hopper & link web leading to Continental main 45mm web will load to 14’ high, hydraulic raise & lower by tractor hydraulics, Lister single cylinder air cooled electric start diesel engine drive, mobile with drawbar fitted good 9.5-24 tyres. Ideal Fodder beet etc. Good condition £1,200 % Chris C 01926 338639 S6801 HESTAIR Todd Contractor Mk1V Plus Cleaner loader, Shaft drive, Lister Petter Diesel, Rod link Cleaning and elevator, Tidy for age Good condition £1,200 % Shaun 07850 978188

4

BUILDINGS/ STORES

C6752 CONCRETE Panels as used on silage pit walls, size 6 feet long x 18 inches wide which bolt together, trough shape will stand on a concreteblock to give extra height. Quantity 55 to be sold as one lot, old but sound Good condition £650 % Chris C 01926 338639 S6173 CROPSCAN 15 Potato store control system. All Electric controls plus 6 controllable Louvred Vent panels, 2 - Woods 4ft Diameter 28kw Ventialtion fans and Tapered Kerouin Floor panels 38” By 20” By 1.75” To do appx 24m by 30m (These sort require prepared concrete floor with ducting cast in) Good condition £3,000 % Shaun 07850 978188 S5789 Panel doors Electric 3.3m wide in 0.5m deep sections slide up rollers 3ph Poss with switch gear Very Good condition £900 each % Shaun 07850 978188 C6798 CRITAL Steel galvanised panels ex indoor grain silos, square profile type all taken down ready to transport. 3 metre (9’10”) long panels x 35 & 2.4m long panels x 16 complete with starter & finisher panels. Includes some corner posts if required. Originally made two x 10’ square & two 10’ by 8’ silos Good condition £1,400 % Chris C 01926 338639 S3751 MOBILE Homes Various types available either 12 or 10 ft wide.Generally 22ft or 28ft long suitable for accomodation or office. Prices according to age. Even some late models if required % Shaun 07850 978188

5

COMBINE HARVESTERS & EQUIP

S6857 SHELBOURNE Draper Header Hydraulic Drive model with recent new motor. Fittings for JD (Been on 9640) 11ft one piece canvas with good tines. Very Good condition £3,400 % Shaun 07850 978188 S6358 1989 NEW HOLLAND TX 36 Combine with lateral float header, Air Con Cab, Nicholls Concave, Straw chopper, chaff spreader. 20ft cut Self levelling shoe. Well maintained machine appx 3500 hours.

Good condition £19,000 % Shaun 07850 978188 C6927 NEW HOLLAND TX36 Combine Harvester, 1991 model with 2979 rec hours on Iveco engine, hydro transmission, self levelling sieves, straw chopper & chaff spreader, thick wire concave, good front elevator & slats, aircon cab with black steering column, 800/65R32 Michelin wide drive tyres & 16.0/70-20 steering tyres. 20’ header with lateral float, spare knife, new fingers fitted 4 seasons ago, all straight feed auger & reel, Matrot 1.4m (4’6”) 12 volt side knife wired to cab & on folding arm bracket to move from operating position. Mekanag header trailer. Very tidy combine with all straight panelwork, good belts & bright paintworkall dry stored, service history, second owner from new. Very Good condition £21,650 % Chris C 01926 338639 S6928 NICHOLS 2066 Heavy Duty concave fot John Deere 2066 combine, only used one season Good condition % Shaun 07850 978188 S7089 1982 DEUTZ FAHR M2385 12 Ft Cut combine with cab and strawchopper with new blades. Recent overhaul including main drive belts. Good 18.4 - 30 tyres. Hydraulic unloader, Good in cab only 2413 hours Very Good condition £5,750 % Shaun 07850 978188 W3527 1978 CLASS Dominator 85 13’ header. 2500hrs, Ford engine, chopper, header trolley, rape knife. One owner from new. Was last used in 2010. Requires some tidying but essentially sound and complete. poa % Chris W 01787 247286 S6916 CLAAS Dominator 85 Combine, Fitted Straw chopper, cab with water cooler, Perkins Engine 4470 hours. Well maintained. 18.4/15 - 30 Drive tyres. Tidy 13 ft Header with trolley. Good condition £2,500 % Shaun 07850 978188 C6876 NEW HOLLAND TF46 Combine, 1992 model with 4 speed hydro transmission & Merc V8 engine, 4455 rec hours, aircon clean cab, Nichols concave fitted in 2008, recent new 30.5R32 drive tyres, wide section Trelleborg 500/60-22.5 steering tyres, machine had full service and many new parts for 2013 season with cost of £9k (primary shaft belt, recon self levelling ram, header auger clutch & vari sheave etc etc. all documented). 24’ header with black painted reel on trailer, wobble box knife drive, dividers, fully guarded. Machine is all very straight including unload auger & all guards with good paintwork - all dry stored. Good value well maintained high output combine Very Good condition £17,750 % Chris C 01926 338639

C6830 CLAAS Dominator 108 Classic Combine Harvester, 1994 manual model with Merc 180hp engine, straw chopper, 23.1R30 Firestone drive tyres 85% good tread, 14.5/75-20 Continental rear tyes all good, 6 straw walker machine, second owner from new, refurbished unload auger, clean cab with working aircon, cylinder & concave all straight with good front elevator chain & slats, good paintwork for year and all straight guards & panels (lives inside), good drive belts, engine hood & grain tank cover fully working, grain loss monitors, 4252 recorded engine hours. C510 (17’) header on trailer with spare knife, lifters & dividers, good bottom skids, wobble box knife drive, straight guards, reel & auger, tidy paintwork. Combine has some small internal repairs - all cleaned off oiled & ready to go with a service Good condition £18,750 % Chris C 01926 338639

6

COMMERCIAL VEHICLES & EQUIP

S7085 TOYOTA Hi Lux Hardtop Fits Pickup body of Double cab models 2005 onwards. Has Roof rails in ventilation openind side windows. Finished in silver.

Good condition % Shaun 07850 978188 C6739 MAN LE220C 7.5 tonne flat bed truck, 220hp 6 cylinder 2001model with 6 speed gearbox, double sleeper cab, 3271200 rec kms, 7m long timber ply body 2.4m wide with high front headboard plus mesh screen behind cab, floor height 1.3m above ground, single rear axle fitted 225/75R17.5 all good tyres, built as drag trailer specification, rear drawbar & air pipes, twin fuel tanks, leaf spring suspension. Very tidy unit for hay/straw carting or would make classic tractor transport with body adapted as beavertail Very Good condition £3,295 % Chris C 01926 338639

7

CRAWLERS & EQUIPMENT

S6859 TRACK MARSHALL Weight Set Suit TM 90 Crawler, 16 Jerry Can type weights each appax 120lbs. Sustantial weights. Good condition £600 % Shaun 07850 978188 C6788 FIAT Crawler Bottom Track Rollers suit 100/120 models, all refurbished with 45mm gap between roller sides, quantity 8 plus pair additional rollers similar. Also Centre Actuator unit for Hymac 580C 360 degree excavator, fits to centre pivot slew mechainism, fully reconditioned - this priced at £495 Very Good condition £850 % Chris C 01926 338639

8

CULTIVATION EQUIPMENT

W3431 COUSINS Dutch Harrow 4m levelling harrow with manually folds to 3m.

Points in good condition but a few missing.

No levelling board or roller. Good condition % Chris W 01787 247286 S6750 LEMKIN 2m Crumblers To Fit 4M Thorite 9 Cultivatoror similar. 2- Multi tubular crumblers c\w frames to attach to machine with bearings etc. Tried once hence as new Excellent condition % Shaun 07850 978188 C6647 FARM FORCE Front Press 3m wide fitted 700mm diameter 45 degree cast rings in set of 4 +9 + 4 across frame, model number F3300W with front module all adjustable for height of 2 rows spring tines, steering headstock, cleaner chains & greasable bearings to press rings, all good red & black paintwork, machine done little work Very Good condition £3,295 % Chris C 01926 338639 C5458 HE VA Disc Roller (Doublet) trailed 4m wide hydraulic folding, 2005 model, 2 sets front notched Sabre discs 500mm diameter recently fitted with hyd ram adjustment fo depth/aggression (DSD), adjustable soil mat prior to single row of 32 x ‘V’ profile packer rings with scrapers, rear carriage with 400/60-15.5 tyres, side soil retainers on sprung arms, road lights. Recent soil mat curtain fitted. Machine can be used for straw incorporation, on ploughing or as small seeds establishment tool (eg Rape seed) with Variocaster mounted on rear Very Good condition £9,950 % Chris C 01926 338639 S6559 AGRICAST 20” Press Rings 30 degree cast iron 50cms Diameter, 30 of bought & never used. Plus 4 Shafts each 1m long by 45mm and af ew bearings.

New condition % Shaun 07850 978188 S7123 FLEXICOIL Single Press 1.7m Wide for front mounted use. 26” Rings 6” apart. Has A frame mounting for use with flexicoil Front linkage (Available see S7122) Features limited steerage over nylon slider and Stands. Very Good condition £650 % Shaun 07850 978188 C6753 KONGSKILDE Triple K spring tine cultivator, mounted 9’ wide with 25 ‘S’ type tines in 4 rows, pair depth wheels one steel & one solid rubber. Suit small tractor much sought after in spring 2013! Good condition £425 % Chris C 01926 338639 S6917 SKH 3000 Crumbler 3m Wide with 12 rigid tines, good crumblers etc. Close coupled Linkage. Good condition £900 % Shaun 07850 978188 S7054 RECO Maschio 4 Head Interow Rotavator. Used to work land between 4 sugar beet rows 20” apart. Toolbar appx 8ft long. Done very little work Very Good condition % Shaun 07850 978188 C6781 PIGTAIL Cultivator fixed width linkage mounted 4 metre wide ex Browns Hectavator fitted 1” square section pigtail tine x 16 in 3 rows, rear solid section 18” diameter Flexicoil in full width frame with pin & hole depth adjustment on side arms. Strong machine with 5” square box section frame Average condition £795 % Chris C 01926 338639 C6732 FLEXI COIL Trailed 4.2m wideTwin Press, non folding model with rear depth/transport wheels fitted 340/65R18 tyres, hydraulic ram on drawbar to main frame pivot, cast 30 degree press rings 24 front & 25 rear with 170mm spacing plus scrapers, transport lock valve, ideal for use as single implement or as combination tillage train. Some spares Good condition £1,975 % Chris C 01926 338639

S7062 2005 AMAZONE Catros 7500 BBG 7.5m Trailed Hydraulic folding Compact Disc harrows with 400/50 - 15.5 press tyres. Which double up to transport. Suitable for straw incorperation and and seedbed preaparation. Angled discs & bearings only done 300 acres hence still 440mm. Very Good condition % Shaun 07850 978188 C6560 LYNX SUMO front linkage mounted tyre press, model LSF150, 1.5m wide in blue paintwork fitted 5 x 295/80R22.5 commercial tyres, some tyres fitted are poor but comes with replacements Good condition £825 % Chris C 01926 338639 S6503 STANDEN Powavator 3.7m Heavy duty rotavator c\w Rear hydraulic linkage, plus gathering wheels, depth wheels and spare set of blades. Recent drives overhaul. Very Good condition £3,250 % Shaun 07850 978188 S6886 DOWDESWELL Powavator 130 11ft Spike rotor, 1000 rpm c\w twin hoods and steel wheels. Tines about 6” % Shaun 07850 978188 S6990 2007 SUMO Trio 3m Mounted machine with 6 Ultra low draft shearpin legs fitted with Delta winged points, Discs & 760mm Multipacker Very Good condition £10,900 % Shaun 07850 978188 S6853 GALLUCHIO RDA 660 Trailed 6.6M folding Press with levelling boards followed by 2 rows of Cast iron rings. Transport wheels with 300/50 -17 tyres. Good condition £5,500 % Shaun 07850 978188 S7081 HOWARD HE 70 Roatvator, 70” wide, 1 wheel & skids. Recent blades, very tidy Good condition £1,000 % Shaun 07850 978188 C6687 SIMBA DD Ring Trailed 3.3m double press with 600mm diameter all good rings & depth/transport wheels at rear, refurbished in 2009 and unused 2013, total weight 2640 kgs, can be used alone or behind disc harrows etc. Very Good condition £5,450 % Chris C 01926 338639 C6598 JEFFES Big 3 pigtail type cultivator, 14’ wide linkage mounted with primary 9’6” section & fold round 4’6” section assists transport, 2 rows large section tines with wide feet (2 tines smaller section), depth wheel brackets but no wheels fitted Good condition £465 % Chris C 01926 338639 C6952 KVERNELAND CLC EVO 3 metre wide cultivator, 2 seasons use only - total 600 acres, 7 front tines with leaf springs above fitted Evo wide (duck foot style) all good points at 420mm spacing, followed by set angled levelling discs with Kverneland steel packer roller at rear which is both detachable & adjustable for working depth.

Suitable for stubble cultivation or in ploughed/cultivated land as machine can operate at all depths. Genuine reason for sale Very Good condition £7,450 % Chris C 01926 338639 C6677 COUSINS Packa-Rolla 4.4m wide hydraulic folding model with double press rings & front leading tines, 15 adjustable height tines in 2 rows, 22 x cast press rings in 2 gangs (44 in total) all approx 22” diameter (24” when new) with scrapers, rear depth/transport wheels on 12.5-15 tyres, transport lock chains & pin & hole adjustment bar for front tine bar depth. Centre folding type with solid cast rings adjacent to axle bearing carriers. Will go straight to work Good condition £5,750 % Chris C 01926 338639 C6741 COUSINS Packa-Rolla 4.6m (15’) trailed hydraulic folding twin cultivator press (900kgs/metre weight), fully adjustable drawbar, 2 rows front adjustable height leading tines, cast 24” LP press rings quantity 23 front & rear, 12.5-15.3 tyres on rear carriage, centre folding to 2.5m transport width with lock bar, may need a couple of hanger bearings Good condition £5,395 % Chris C 01926 338639 S6663 AMAZONE 4m Packer C\with frame and 16 Vaderstad type levelling boards with ram to adjust depth. Good condition % Shaun 07850 978188 C6748 MICHAEL MOORES Frame & wheel carriage ex 4.5m double press machine, yellow painted box chassis with single ram for folding wing mechanism, 11.5/80-15.3 tyres. No press rings fitted so could be adapted to make trailed 2 leg mole plough etc. photos available Good condition £1,400 % Chris C 01926 338639 S6978 COUSINS Packa Rolla Single Row DD Ring Hydraulic folding press. 9” spacing, Road lighting. Transport wheels to rear.

Appx 13ft 8” working width. Very Good condition £4,500 % Shaun 07850 978188 S6696 SIMBA Single Press 5.5m Wide Standard 18” cast rings, hydraulic folding, plus leading tines and wheels to transport at back Good condition % Shaun 07850 978188 S7006 H BUSHELL AND SONS Cambridge Rolls Conventional set of 8FT plus 2 - 4ft Pups. Exceptional 20” crimps look hardly used. Unusual for their age. Very Good condition £900 % Shaun 07850 978188 S6525 Pigtail Tine Drag, 17ft Hydraulic folding, 3 bars 100mm frame, Sturdy tool with 1” section pigtail tines. £1,700 % Shaun 07850 978188 S6189 COUSINS Points 7 Brand new Quck fit cousins subsoiler points. Part no 8100 8195 £250 % Shaun 07850 978188 S6403 SIMBA Single Press Trailed 1 Row cast 24” Ring press, 6” spacing c\w end tow kit. Good condition £1,600 % Shaun 07850 978188 C6599 TWOSE Spring Tine cultivator, 14’ wide linkage mounted with 3 rows tines, rear drawbar frame, end hitch ‘A’ frame for transport, total 33 tines with 3 broken, 22 spare new points, blue paintwork Good condition £400 % Chris C 01926 338639 S6948 TIMAG 4m Drillmate Tined cultivation unit to mount under power harrow or independantly on front linkage. 1st row Rigid and 2nd row of tines. Good 380/500mm packer with scrapers Good condition £1,250 % Shaun 07850 978188 C6913 ZIG ZAG Harrows hydraulic folding linkage mounted 8.2m (27’) wide, 9 sections fitted 1/2” thick square tines pulled by drag bar, twin ram system operating on 4” x4” box section main frame painted green (probably Cousins) Good condition £795 % Chris C 01926 338639

C6891 TULIP

S6860 PARMITER UTAH 12FT Rigid Offset dics harrows with 16 discs on front appx 18 - 20”, 16 rears appx 23 - 24”. Fitted Rear Drawbar, Vredestein 10/75 - 15.3 Tyres on transport wheels 6 stud axles.

Good condition £1,500 % Shaun 07850 978188

11 Vario 300XL Multidisc (marketed by Teagle) one pass 3m wide tractor linkage mounted cultivator, 2011 model done little work with fully retractable legs on hydraulic rams. Front cutaway rubber mounted angled discs 540mm diameter followed by 6 winged 850mm adjustable height legs with Solo shin pieces, rear discs as front 550mm dia, Guttler roller rear packer 560mm type on pin & hole height adjust arms, steel side soil deflector plate (adjustable on offside). Accumular pressure pack to tine legs. Top spec machine with all good paint etc. Very Good condition £9,995 % Chris C 01926 338639 S6524 LEMKIN Kompactor S300 3m Tined cultivator. c\w levelling boards and crumblers Very Good condition % Shaun 07850 978188 S7121 14Ft Springtine Standard Single S tines on 4 bar manual folding frame, Some spare tines. Average condition £300 % Shaun 07850 978188 C6399 KVERNELAND Trailed Press 4 metres wide (non folding) made up from set of 700mm diameter furrow press rings (25 in total), axle sets with 2 x 7 ring & 1 x 11 ring, cleaner chains, screw adjuster for drawbar height, rear depth wheel module hydraulic ram raise & lower with 12.5-15 tyres. Concrete ballast block in centre frame, can also take tractor weights on frame bars for extra ballast. Set spare rings on shafts (could be made double press) Good condition £1,400 % Chris C 01926 338639 S6922 FLEXICOIL 3 & 4m Coils Complete Flexicoils, 2 x 3m C\w recent bearings and 1 x 4m also with bearings in Very good order Very Good condition % Shaun 07850 978188

9

DE-STONERS

S6813 GRIMME Trailed 1800mm Web Destoner, 40mm pitch, Rear Cross conveyer and bouldedr box. Not used lately, Needs a PTO Shaft. Average condition £800 % Shaun 07850 978188 S6230 1997 REEKIE RT 170S Rear mounted Bedtiller later model with chain case skid, tines appx 70% plus RBM 2 Ridgers on back with duck bill points. Very Good condition £1,350 % Shaun 07850 978188 S6694 2004 JONES Triple Bed Tiller Hydraulic Folding Single rotor Bed Tiller with 3 of 1.65m Heads. 2- 6.9- 6.00 Depth wheels. 4 Ridging bodies. Nice And Straight, Recent New clutch and yoke.

Very Good condition £5,000 % Shaun 07850 978188 S6229 1997 GRIMME CS 1500 Combistar Trailed destoner with 2 large discs, large diablo, 4 full shares & 2 half shares. 7 rows of stars onto 45mm web and cross conveyer. Steering & levelling axle with 12.5 80 - 18 tyres. Good condition % Shaun 07850 978188 S7015 1991 GRIMME Mustang Trailed destoner with 6 Piece shares, Full diablo, 45 mm Main web with Clod blocks, 30mm pitch 55 wide cross conveyer, Steering axle. Good condition £2,000 % Shaun 07850 978188 S6179 PEARSON Jumbo 60/80 Bed Former c\w 2 standard Pearson Bodies, with 2 trip leg subsiolers and later weighted markers. Good condition £700 % Shaun 07850 978188 C6720 GRIMME Destoner Declodder, 1991 Mustang model 1500mm wide at discs, pto drive to twin webs first continental type 45mm in good order, front split shares with cutaway side discs & large Diablo above, steering axle with adjustable track, heavy duty scrubber web with hydraulic operation (farm addition), rear cross web for stones & clods, good tyres, not used last 2 seasons but plenty of work left in machine, will go straight to work Good condition £1,350 % Chris C 01926 338639

10

DISC HARROWS

S6985 SIMBA 1 B 11ft Rigid Offet disc harrows 30 as new 24” Cutaway discs 9” apert front and rear. 10/75 - 15.3 transport wheels. Plumbing and and electrics to rear drawbar. Good condition % Shaun 07850 978188 C6861 PARMITER Utah 40-32 trailed offset 12’ wide disc harrows, pair with connecting hitch can be operated parallel behind high horsepower tractor, blue painted models with 16 front cutaway & 16 plain rear discs, front 22” diameter & rear 24” all with set scrapers, manual angle adjust, hyd operated depth/transport wheels, weight per disc 79kgs - priced as a pair Good condition £2,695 % Chris C 01926 338639 S7094 RANSOMES HR 46 15ft Hydraulic folding discs. Sound frame with vedry well made rear drawbar. 10.5/65 -16 transport tyres. 16 - 17” front discs, 20 -21” rears. Average condition £1,500 % Shaun 07850 978188 S7120 RANSOMES HR 33 10ft 6” Disc harrows with transport wheels, 18 -19” plain discs. Weight trays over each gang.

Good condition £450 % Shaun 07850 978188 S6695 GALLUCHIO GPAR 5.0m Folding Disc harrows , 4 depth wheels with 12.5 15 tyres. 24” discs. Hydraulic gang angle adjustment Good condition £4,500 % Shaun 07850 978188 S6402 PARMITER UTAH 250 Heavy trailed 3m Disc harrows. 23” Cutaway front discs, 23 -4” cutaway rears. 15/55 - 17 transport tyres. Rear drawbar & hydraulics.Sound Good condition £3,000 % Shaun 07850 978188 C6754 PETTIT 77 trailed offset disc harrows, 3.6m (12’) working width with part wing fold round section for transport, manual gang angling, cutaway front discs 22” diameter, plain rear discs 21-22” diameter, depth & transport wheels with hyd ram actuation (seal slight leak), rear drawbar, red paintwork, weight 74kg/disc. Same model as Dowdeswell 77’s Good condition £1,975 % Chris C 01926 338639 S6171 BUSH HOG 1400 Series 7.8m Wide Hydraulic Folding X pattern disc harrows. Ideal for rapid wold cultivation with 22” plain discs front & back. Rear drawbar, recent lift ram. 6 wheels for depth control & transport. Good condition £4,250 % Shaun 07850 978188

DRIERS

C6757 ALLMET Vertical grain drier Mk 4 model rated at 110 cwt per hour, 4 sections each with extractor fans, variable speed system, chain & slat conveyor moves grain through hot & cold sections, diesel fired burner. Large steel framed bucket pit elevator included. Old but all working. Suit spares etc. Good condition Offers % Chris C 01926 338639 S7045 FARM FANS 20TPH Double Unit On over the other c\w ASC, Gas fired on 3 phase electric. Plus Double Leg Perry 13.5m Elevator only 5 seasons old and Aspirator. Also Good Carier 14.5m 8” Elevator. Buyer removes % Shaun 07850 978188 C6703 DRYING TUNNEL & Fan comprising timber tunnel to make 42’ (7 x 6’ long sections) 8’ high & 3’ wide with access & fan flange, galvanised steel ‘A’ section perforated laterals to fit to tunnel sides 3’ long quantity 148 with end sections etc (all 10” high & 11” wide at base).

15hp centrifugal 30” dia fan 3 phase electric left handed type with recent starter & wiring Good condition £1,500 % Chris C 01926 338639 S6761 WILDER Portamatic Mobile Drier, Diesel Fired with 3 phase fans. Single Axle chassis. Unit 14ft 2” by 8ft wide 11ft tall, Drawbar and burner add 9ft to length. Rear Top fill & bottom Discharge. Plus 10ft square plywood supply hopper. Good condition % Shaun 07850 978188 S6846 1997 FARM FANS AB 180 Gas fired Batch Drier with 3 phase Fan. Mounted on a chassis to ease movement.

Top Fill, bottom discharge. Galvanized screens suitable for most crops inc Beans, Linseed & rape. Fitted automated systems control which enable the Drier to switch supply conveyeres on and an off to automate process. Size overall 16ft by 6ft by 9ft tall.. Recently serviced Good condition £6,000 % Shaun 07850 978188 S7128 2006 MASTER

16 Ton Mobile 20 Ton Grain drier, Fully automated model driven by 3 phase electric motors.with oil fired burner and integral tank. Fitted Stainless steel telescopic rape screens, could be extended up to hold 20 to if required.Only 1784 hours use Very Good condition £20,000 % Shaun 07850 978188 C6707 WILDER Robomatic grain drier parts. Pair Myson extractor fans circular type 50cm dia & 1m long with axial 3 phase electric motor drive, diesel burner unit complete with hot air duct adapter fitted NuWay control with magic eye. All removed from working drier Good condition £700 % Chris C 01926 338639 C6494 ALLMET Continuous flow two section grain drier fitted rape screens in floor, 6.5tph diesel fired model refurbished by Allmet when installed on farm approx 20 years ago & regularly serviced by them. 3 drying plus 1 cooling sections operated by pair 15hp axial fans with silencers on 90 degree ducts. Gearbox drive with 3 phase motos & full control panel (auto ready). Removed ready to transport but main electrics connected or numbered Good condition £1,750 % Chris C 01926 338639 C6653 FARM FANS AB180A grain drier, automatic batch type 1998 model with only 1678 working hours, electric fan plus lpg burner, top feed & bottom discharge, control panel which allows control of intake & outlet systems, removed ready for transport & sold with full service prior use after reinstalling. Available with a Skandia aspiration precleaner 60tph capacity, model type DOB60F96, complete with quantity 10” (250mm) dia ducting. Drier & cleaner can be sold separately - both in excellent order Very Good condition poa % Chris C 01926 338639 C6795 OPICO 525XE GT Mobile grain drier, 2003 model completely professionally refurbished in 2012 & done just 150 hours since. 12 tonne capacity pto drive fan & lpg gas fired burner, 12 volt electrical system, all good screens, augers, bearings & unloader, twin wheel model with stabiliser legs, 50 tph fold up rear loading hopper, 12” central auger with agitator arms, swivel round high top unloader (removed ready for transport. All very good paintwork & screens Excellent condition poa % Chris C 01926 338639

12

DRILLS

C6563 MASSEY FERGUSON 500 trailed grain drill, 4 metre model with 23 disc coulters (7” spacing) new in 1992, 14.9-24 tyres, hydraulic disc markers, twin eradicator tines, single tramlining units, rear Norton fixed section following harrows with mini pigtail tines all fold for transport, drill put away oiled up & discs all good at 12” diameter. Quantity of spares. Please note - this drill does not have an end tow transport kit or drill transport trailer (Reekie transport trailer available at extra cost not at same farm) Very Good condition £1,795 % Chris C 01926 338639 C6881 HORSCH DS23 3 metre grain drill modified with 5 x Simba LD (low disturbance) winged legs fitted tungsten tip points (done 70 acres) mounted on 6” x 4” box section beam attached to lower link tractor hitch followed by Vaderstad disc module in 2 rows + set rear levelling boards, wheel eradictor tines, Pronto double disc seed openers x 20 on rubber suspension behind 10 x 10/75-15.3 chevron tread pnumatic press wheels, Accord new type metering system with 1000 pto drive, return to tank & fan speed monitor, tramlining, pre-emerge discs, Vaderstad bout markers, hyd lift ram to seed coulters & front module lift ram with pair adj depth wheels on front beam, rubber tyre seed unit drive off packer tyres, 380mm dia front cultivator discs & 330mm dia drilling discs.

Requires 180hp with LD legs in work, recently converted on farm & done little work Very Good condition £11,395 % Chris C 01926 338639

• See also the wanted section and read the buying/selling details before calling

36 APRIL 2014 S6941 1995 FIONA Appollo DR 3m Drill for power harrow fitment .Comes with 25 hydraulic lifting suffolk coulters in 2 rows. Access platform and following harrow. Easy to calibrate, Bracket suits Kuhn 303 harrow.

Good condition £1,900 % Shaun 07850 978188 S6723 MATCO Moncentra SP 6 Row Precision drill with cell wheels for Sugar Beet, Done very little work Good condition £800 % Shaun 07850 978188 C6777 KRM SOLADRILL 799 Tine Drill, 6 metre linkage mounted version first used in 2008, sprung loaded tine coulters in 3 rows currently set at 15cm spacing but original tines with machine to make full 48 coulter model, front cultivation tines & rear covering tines on frame, Accord pneumatic metrering system with pto driven fan & extra large hopper, hydraulic folding wings, hydraulic bout markers, tramling x 2 either side, return to tank seed system, tractor wheel ereadicators, flotation 550/50-16 tyres, all good coulter tips, machine little used in 2012 Very Good condition £8,675 % Chris C 01926 338639 C6811 KUHN KRM drill combination consisting of Kuhn 4003D power harrow 2003 model with quick fit tines (8”) & tractor wheel eradicators, 1000 pto drive on 13/4” shaft, good side plates, clod board, rear 550mm diameters steel packer. KRM Soladrill pneumatic 4 metre grain drill 2011 model mounted above with hydraulic motor fan drive, sprung tine coulters in 3 rows at 100mm spacing, rear double following harrow, pre-emergence disc markers, RDS controller with in-cab rate adjustment on the move (requires no land wheel), large hopper includes extension (more than 500kg capacity), bout markers mounted on power harrow, tramlining. Very Good condition £12,750 % Chris C 01926 338639 S6812 VICON 6m Supaseeder Suffolk coulter Air Seeder c\w Following harrow, hydraulic markers and End tow kit using 11.5/80 - 15.3 tyres Good condition % Shaun 07850 978188 S6880 2007 HATZENBICHLER Seeder Unit Suit subsoiler etc, up to 8 outlets, Wheel driven. Very Good condition % Shaun 07850 978188 C6848 STANHAY Precision drill last used for sugar/fodder beet, model S981 12 row on end tow transport trailer, bout markers, 4 x rubber tyred drive wheels, ‘A’ frame hitch to main frame (requires male section) as machine is 2 x 6 row drills put together, front rubber coated wheels to seed units with steel rear press wheels, belts for sugar/fodder beet for seed placement, painted in Hestair orange. Horstine Granular boxes not used by current operator.

Good condition £1,175 % Chris C 01926 338639 C6916 MCCONNEL Shakaerator 3m wide linkage mounted 7 leg base unit with rear adjustable height solid coil, 24” all good legs fitted wide points & good shins. Demountable Vicon LZ 401 Supaseeder pneumatic drill hopper with hydraulic fan drive & hopper cover, twin seed tubes to each leg with coulter tube behind foot, duplex chain & belt drive to fan, rear starwheel ground drive to drill. All in very tidy order with good paintwork etc. Ideal rape establishment or bean drill Very Good condition £4,395 % Chris C 01926 338639 C6960 MASSEY FERGUSON 30 Drill 4 metre narrow spaced disc model (31 discs) with end tow transport kit, 14.9-24 tyres, hyd disc markers, wheel eradicator tines, twin tramling units, Reekie following harrow, good disc coulter grain outlet cheeks, used as grain only but complete with rear feed units, tidy machine with good paintwork Good condition £1,845 % Chris C 01926 338639 S7000 STANHAY Rallye 590 12 Row cell wheel precision drill on Rigid end tow toolbar.Fitted Tungsten steel coulters, Hydraulic markers, Clod pushers & soft rubber press wheels. Set up for Sugar beet in 20” rows but will adjust. Good condition £1,500 % Shaun 07850 978188 S6893 ACCORD DL 4m Mounted pneumatic suffolk coulter drill c\w tramlining, access step, Hopper extension & cover. Tidy for age Good condition £700 % Shaun 07850 978188 C6931 MASSEY FERGUSON 30 Grain drill 4m model with 23 disc coulters, end tow transport kit fitted, Reekie rear following harrow, good 14.9-24 tyres on silver wheels (late model on an X prefix serial number), hydraulic markers, tramlining (5+T cam), wheel eradicator tines, 5 coulter return springs each side, standard plus bridge link (for power harrow/cultivator) drawbars, feed units to both hoppers but curently used as grain only, fine seeds rollers, calibration kit & some spares, fully working drill with 12.5” diameter discs (13” when new) and all good disc cheeks Good condition £1,695 % Chris C 01926 338639 S6675 TECHNEAT Autocaster Electric seeder attachment for rape & fine seeds. Will Fit subsoiler with 4 tines for job or On combine header. 8 outlets and metering wheel Good condition % Shaun 07850 978188 S6810 CONCEPT 4M Combination Aerodrill 1000 with Suffolk coulters in 3 rows, Hydraulic markersand following harrow mounted on Concept power harrow wth packer roller Average condition £1,600 % Shaun 07850 978188 S6944 2000 SIMBA Horsch C04 Trailed hydraulic folding tined drill with duet couters, disc coverers, Linkage sited fan, tyre packers, Following harrow, Disc pre emergence markers and road lights. Very tidy drilldone low acreage Excellent condition £8,500 % Shaun 07850 978188 S6339 2007 STOCKS AG Turbojet 8 Out let Seeder unit , Electric fan drive and radar control. Bolts onto Subsoiler or rolls etc to drill. Very Good condition % Shaun 07850 978188 C6747 SMALL SEEDS APV PS250 M2 distribution hopper & seed tubes ex Discordon cultivator, 250 litre plastic hopper, star wheel drive, electric motor drive to air seeder unit, twin outlet bars with 4 outlets each. In cab control box. Will fit easily on other machines - subsoilers, Shakaerators, grass harrows etc Good condition £1,225 % Chris C 01926 338639 S6670 STANHAY S981 12 Row Hydraulic Folding sugar beet drill. Fitted Clod pushers and soft rubber press wheels front and back Good condition £1,600 % Shaun 07850 978188 C6130 FLEXICOIL PC40 drill combi rear mounted 4m wide cultivator/packer unit, consisting of two rows mini 1” pigtail tines on 3” box section frame with standard width reversible points followed by fully height adjustable (pin & hole on side plates) rear tyre packer made up of 24 x 13” type car tyres on one shaft. Three point rear attachment behind headstock to take box drill or Accord type with hyd fan drive plus many other options. Originally used with KRM drill. Useful machine will go straight to work (no drill included) Good condition £875 % Chris C 01926 338639

W3493 WEBB

WTB6 6 row beet drill Cell wheel type seeder units. Tidy drill suitable for fodder and sugar beet. Good coulters, tyres and markers. Last used 2 years ago. Good condition % Chris W 01787 247286 S7125 MF 500 4M Grain only Disc coulter drill c\w Bridge link and End tow kit. Good discs and tubes (5” spacing) Following harrow & step, Hyd markers, erradicators & pre emergence markers. 70% 14.9/13 - 24 tyres. Very Good condition £1,500 % Shaun 07850 978188 S6678 2012 KRM PS 120 M1 Small Seeder unit with up to 8 Outlets for subsoiler etc, 2 spare sets of fine seed metering wheels, Electric fan, uses Sensor (wheel mountable) to meter rate. Digital in cab read out.Inc spare pipe and 5 distrubution tubes. Fitted but Never used New condition £2,375 % Shaun 07850 978188 S6802 STANHAY Mk 1 6 Row precision drill c\w Flat steel press wheels, front and rear, Belts for sugar beet. Seeding monitors Good condition % Shaun 07850 978188 S6747 2000 SIMBA 4M Freeflow Hyd Folding Drill , Doubler coil heavy pigtail tine coulters wqith new points. 2 rows of Forklift tyres, Following harrow & marker. Opt JD pump £1250 Very Good condition £7,500 % Shaun 07850 978188 S6971 VICON LZ 401 Supaseeder 4m Accord Style & metering drill using Vicon Polyhopper. Good Suffolk coulters in 2 rows. 7 -12 wheels. Hydraulic centre markers.Tidy little drill Good condition £800 % Shaun 07850 978188 S6909 AMAZONE 3m Combination Comprising of KG302 Heavy 1000 rpm Duty Power harrow with new blades and tyred packer. Fitted with RPAD 302 Drillstar with Suffolk coulters in 2 rows, Hydraulic markers and access step, Hydraulic following harrows and road lights. Good condition £3,950 % Shaun 07850 978188 C6822 KRM Soladrill R Ti model for mounting on ‘A’ frame (make drill/power harrow combi), 4 metre wide with suffolk coulters in 3 rows, hydraulic fan drive to air seeder unit, tramlining, disc markers, pre emerge marker, rear harrow, star wheel type land wheels either side, de-mount stands. New in 1997 may need some parts to put back to work or for spares, ideal to use on cultivator for bean drill Good condition £925 % Chris C 01926 338639 S6998 AMAZONE ED 451K G & F Maize Drill Comprising of mounted Fertiliser Drill fitted with 6 precision ED Drill units, Outer 2 units folding up for transport. Good Steel drilling coulters, wide rubber press wheels & Hydraulic markers. Rare and usefull drill Very Good condition £5,750 % Shaun 07850 978188 S7099 2006 VADERSTAD

A400S Rapide A400S System Disc Drill with Staggered Track grip press wheels and Radar metering , plus Pre-emergence Markers New in 2006 BUT ONLY DRILLED 39 hectares as it was bought just as a back up drill. Excellent condition £36,500 % Shaun 07850 978188 S6646 WEBB 8 Row Precision drill, end gearbox model c\w cell wheels for sugar beet. Flat steel front press wheels and flat rubber rears. Tidy for age Good condition % Shaun 07850 978188 C6963 KVERNELAND T-S 4 metre tine drill, linkage mounted model hydraulic folding with rubber tyred depth wheels, pto drive to Accord pneumatic seed distibution system, tramlining, wheel eradicator tines, hydraulic operated bout markers, Z type following harrow, pre-emergence markers, in-cab control box, road lights, hopper extension with cover, leaf spring cultivator/tine coulters, quick hitch bar coupler Very Good condition poa % Chris C 01926 338639 S6122 1996 VICON LZ505 3m Suffolk coulter Combination drill, Pneumatic seeding, PTO fan, Following harrow, Pre emergence markers, Hydraulic markers & stands. Mounted on Kuhn 300 power harrow with HD 3 speed gearbox, Good PTO £1,750 % Shaun 07850 978188 S7002 STANHAY Mk 2 6 Row precision drill with flat steel press wheels, 8 & 7” Belts for sugar beet, 5 kale belts & and Sweed belt for cover drilling. Good condition £600 % Shaun 07850 978188

13

ELEVATORS & CONVEYORS

S6919 FYSON FE 85 Elevator 27ft Elevator with good 500mm belt, 3 speed SINGLE Phase Drive ! Front Jockey wheels and potato hopper. Hydraulic up and down Very Good condition £1,900 % Shaun 07850 978188 S7041 CARIER Hi Capacity 9” Belt & Bucket Elevators (Choice of 2) Appx 25 Ft Tall. Still Installed inside To be removed. 3 phase motors 40 - 60 TPH Good condition % Shaun 07850 978188 S6607 ANGLEVEYER Grain conveyer Choice of 8 or 5m. Casings 280 mm by 125mm 3 or 4 Kw 3 phase motors. Took out ready to go. Usefull conveyer Good condition £800 each % Shaun 07850 978188 C6909 JOHNSON Rubber Belt elevator used in small potato store, single phase elec motor drive, steel 7’9” wide receiving hopper, 50mm cleated belt, primary fixed angle section 9’ long, second 10’ section with hand pump hyd raise/lower system, concrete stabiliser block in base frame, rubber wheels make it easy to move, old but good working order could suit other crops Good condition £945 % Chris C 01926 338639 S6974 40FT Belt & Bucket Elevator using Very good 13” belt with 12” Buckets, Dismantled inc 6 sectionsof 10ft 15” By 10” internally. 1 8ft & 1- 5ft. Good Head with Fenner TD6 24.5 :1 Gearbox, No Motor but pulleys inc.Average Base needs a plate Good condition £1,250 % Shaun 07850 978188

S6973 10” Raddle Chain Conveyer Appx 56 Ft Complete with Reduction Gearbox, 3 phase motor & chain plus 34ft of Casing only. Dismantled in 10ft, 5ft, 6ft & 8ft sections. Heavy duty slow running conveyer, gearbox driven by duplex chain from motor.

Good condition £1,250 % Shaun 07850 978188 S7088 FARMERS FRIEND Angleveyer Appx 20m Long capable of moving grain up 45 degrees at appx 20 tph Good condition % Shaun 07850 978188 C6906 CARIER Belt & Bucket vertical grain elevator, single leg box section all steel 10” x 7”, 1.5kw elec 3 phase motor & gearbox drive, good base section, approx height 22-23’ all taken down in sections, good belt with steel 8” buckets spaced at 5” apart Good condition £795 % Chris C 01926 338639 C6655 SKANDIA Belt & Bucket Elevators - 60tph model SE140/40 with 2.6kw 3 phase elec motor drive, 140mm wide buckets, outlet height 5.4 metres. SE140/40 belt & bucket model (40tph) with outlet height of 6.5m & 2.5kw motor drive. Also Carier 65tph belt & bucket elevator with 10” wide buckets, 5m outlet height, 4kw 3phase elec motor drive. All modern steel casing type done little work Very Good condition poa % Chris C 01926 338639 S6885 GAMART ENGINEERING 6m Flat Belt Conveyer with 60 cms belt on 4 legs with caster wheels. 3 phase side drive.

Used one season only Very Good condition £2,000 % Shaun 07850 978188 S7030 FYSON FE 85 Standard 27FT Elevator with 18” Rubber belt, 2 spped drive via cahngeable belts. 3 Phase motor. Average condition £400 % Shaun 07850 978188 S6604 9 “ Single leg Elevator, 9” Buckets on 10” Belt 11” by 6” casing. 3 phase motor & drive. Appx 20ft long. Removed ready to go Good condition % Shaun 07850 978188 S6987 RAMSEY ENGINEERING 34 Ft Elevator Mobile 600mm Rubber belt type.

3phase top drive, Powered wheels swivel to slew automatically using sensors and poles. Hydraulic down and up to 16ft. Well specced machine with small circular fill hopper. Good condition £3,000 % Shaun 07850 978188 S7101 2001 NEWLAND Pro Line 800mm Belt Inclined conveyer. Appx 9.6m Long with reversible drive fitted 1.5 Kw 3 phase motor. Very Good condition % Shaun 07850 978188 S6816 LANICHBURY Double leg 9” Belt and bucket elevator with 4.2 kw 3 phase motor. Appx 27ft long. Also 32ft Single leg elevator. Good condition % Shaun 07850 978188 S6726 HERBERT Industrial Elevator 9m Plus 2m Head. 750mm main belt. Hydraulic raise & lower, plus head separately up and down. Good condition £5,750 % Shaun 07850 978188 S7102 MOTALA MC 2000 500 kg Platform Lift. Int 1.1 by 1.4m, externally 1.3 by 1.7m Raises appx 3.5m.3 phase as new % Shaun 07850 978188 S6603 CARIER 6” Top Conveyer Late type with Sprung tensioners . 5.25” by 7.75” Internal casing. Raddles at 9” centres ( 3 link spacing. c\w 3 phase ,motor Very Good condition £1,000 % Shaun 07850 978188 S6602 Top Conveyer 36FT Long 8” conveyer with 7.5” HD chain , 3 links between raddles (11” centres) 3 phase motor & Fenner 20 :1 gearbox Good condition £800 % Shaun 07850 978188 S6725 HIGH CAPACITY 12M Powered Commecial elevator, 600mm belt, Small Spreader hopper at feed end with a ccess pltform roud it. Splits and folds back to transport. Hydraulic up and down plus powered slewing and feeding wheels. Good condition % Shaun 07850 978188 W3266 FYSONS Rubber Belt 25 foot conveyor with chevron belt. 6 foot extention with manual slew. 3 phase motors, hand operated hydraulic pump and twin rams for lift, full width and narrow hoppers, towing eye. Good condition poa % Chris W 01787 247286 C6654 SKANDIA Grain Conveyors, Model KTB40.98 used as a top conveyor 40tph capacity 20m (60’) long, 3 phase electric motor drive, twin outlets, includes inclined section to follow roof profile & maximise drop height. Scandia bottom conveyor with inclined section to outlet at 1m above ground, 40tph with 2.2kw 3 phase motor 9 metres long, new plastic flights fitted on chain Very Good condition poa % Chris C 01926 338639

14

FANS

C6662 REKORD Centrifugal 15hp free standing drying fan, model LCL60 3 phase, 30” diameter fan left handed type with 18” x 24” square outlet, older blue painted type not used recently Average condition £345 % Chris C 01926 338639 S5822 REKORD RS 15 LH Inlet, 3 Phase, Appx 4ft Dia, 2ft across. C\w star delta starter etc Good condition £400 % Shaun 07850 978188 S6841 MATHEWS AND YATES PU 1 Type LO Left hand Inlet fans 4ft diameter by 22” fitted 30kw Heater banks. All 3 phase 415v Good condition % Shaun 07850 978188 S6683 REKORD Fan RH Inlet Model OF 2 c\w 7.5Kw motor. 15” wide 30” diameter.

15” by 20” outlet. Mounted adjustable frame . Very Good condition % Shaun 07850 978188 S6393 15 HP LH Inlet 3 phase fan. Has heater banks , probably not working . Fan runs well . Average condition £350 % Shaun 07850 978188 C6949 REKORD RS10 centrifugal drying fan, left handed type, 3 phase 7.5kw (10hp) motor, red paintwork, removed ready to transport. Also Kongskilde TRL 15 grain transport blower, 3 phase electric 11kw (15hp) motor drive, hopper feed to cell wheel, 8 x galvanised 6” dia OK piping in 2m lengths, 3 x 1m lengths & 4 bends blower & pipes priced at £300 Average condition £395 % Chris C 01926 338639 S5767 Fans 30” By 24” Centrifugal type c\w 3ph 2.2 kw motors. Also some smaller 1.1kw fans Very Good condition POA % Shaun 07850 978188 C6806 TYPHOON Centrifugal 25hp 3 phase electric drying fan, free standing right handed type used with outdoor grain silos, red painted model with switchgear & Tryac controller for use with modulating burner. Can have paired galvanised steel fan ducting to supply silo if required Good condition £475 % Chris C 01926 338639 S6717 REKORD 20,000 CFM LH Inlet Corn drying fan.36” Diameter 2ft across .Oringianlly had 30hp electric motor drive to drive now fitted with Gearbox belt driven to drive with PTO. Also4ft diameter Axial flow fan for sale. Good condition £400 % Shaun 07850 978188

S6262 TYPHOON HE 30 PTO driven fan, 6ft Diameter by 2ft. RH Inlet. Shaft out with 2 pillar block bearings. Good condition £400 % Shaun 07850 978188

15

FEED & FORAGE BOXES

S6385 1993 JOSKIN Feeder Box. Mounted Self filling silage feeder. Chops before feeding on the RH. Unload only to the left. Used once only Very Good condition £1,750 % Shaun 07850 978188 S6144 TEAGLE Tommahawk 5000 3Pt Linkage monuted Bale Shredder, Spreader. Round bale drum machine with spread left or right. Average condition £1,000 % Shaun 07850 978188 S6910 TAARUP 852 3 point linkage mounted Bale chopper/ spreader. Self loads Round or big/med square bales vai hydraulic back door. Top RH hydraulically swivelling top spout with electric angling chute to throw chopped straw into pens.

Very Good condition £4,500 % Shaun 07850 978188 S6867 2006 KEENAN Klassik 140 Diet Feeder, Std Height LH Discharge with 2ft chute, rear ladder, STAD 04 Weighcell system. Small set blades to chop potatoes and Slabs of straw. Very Good condition £8,000 % Shaun 07850 978188

16

FERTILISER SPREADERS

S7058 STOCKS Bateman Twin Set Fan jets mounted on special frame to fit on front of Bateman RB 35 or similar sprayer. 24 36m total bread. Very Good condition £1,250 % Shaun 07850 978188 W3526 2003 KRM BREDAL

K65 K65 KRM Bredal trailed spreader fitted with greedy boards. 8300kg capacity. Has a roll over sheet, new floor belt (fitted approx. 500 acres ago), fertiliser kit with the appropriate chute and discs. Chalk/ Fibrophos discs with chute. Has been replaced by same machine but one fitted with weigh cells. It is in full working order and had a rear end re-spray while it was apart having the new floor belt fitted. Very Good condition £15,900 % Chris W 01787 247286 S7003 AMAZONE ZAM Twin Disc mounted spreader. C\w 24m Discs in tidy order Good condition £900 % Shaun 07850 978188 C6950 LELY Centreliner 1500 twin disc mounted fertiliser spreader, hydraulic shutoff, all good 1500 litre capacity steel hopper with cover, older model machine spreads up to 12m but kept dry stored in working order Good condition £495 % Chris C 01926 338639 C6948 AMAZONE ZAF 1203 linkage mounted fertiliser spreader, twin disc spreads up to 12 metres, 600kg capacity steel hopper, hydraulic shut off to each disc (discs can operate independently), big bag cutter facility, tidy small machine in gwo Good condition £475 % Chris C 01926 338639 S6959 VICON 602 Varispreader mounted on ATV chassis with Honda petrol engine to drive. Floatation tyres, pulls on 50mm coupling. Ideal for large Quad. Good condition £900 % Shaun 07850 978188 S6890 GAMBERINI Trailed Salt Single disc spreader. Suit quad bike or compact.

Wheel driven. Good condition £400 % Shaun 07850 978188 C6696 NODET DPS12 Parts only for fertiliser/small seeds/granular application, all from used machine including fan with gearbox, metering rollers & small seeds kit (note no hopper or other items) Good condition Offers % Chris C 01926 338639 S6769 VICON Rotoflex RS XL 2 Disc Mounted Fert spreader Do 24M c\w Cover grids & road lights Good condition £1,500 % Shaun 07850 978188 S7025 AMAZONE ZA - M Twin Disc fertilser spreader Extension to 2000 litres. 12 - 24m discs. Hopper grids. Twin hydarulic shut offs siamesed into one pipe with taps.

Good condition £650 % Shaun 07850 978188 S5958 KRM EX 1600s Spinning disc fertiliser spreader c\w hydraulic shut off & hopper grids. Straight & tidy Good condition £1,200 % Shaun 07850 978188 S6219 RECO SULKY DPX Expert Twin Disc Spreader with 12 - 28 discs for 24m, hopper extensions, cover & Grids. Unusually good order Excellent condition £1,850 % Shaun 07850 978188 C6574 VICON Rotaflow RS-L mounted twin disc fertiliser spreader, hyd shut off control, hydraulic tilt ram for headland work, 1650 litre hopper with folding black cover sheet & internal grille screens, stainless spreading discs with rate adjusters, 10 to 24m spreading width currently set at 20 metres, front stone & mud guards, 1997 model all in working order Good condition £1,125 % Chris C 01926 338639 S6707 2006 AMAZONE ZAM 1200 Twin disc mounted spreader with SB, S, Hopper cover, grids and road lights. Comes with 3 sets of discs inc 12, 24 & OM24-36. Only used for seed. Very Good condition £3,000 % Shaun 07850 978188 C6956 RECO Sulky DPX 1504 twin disc fertiliser spreader, 1500 litre steel hopper with folding cover, stainless spreading discs can operate at 12 to 24 metres, hydraulic on/off, internal hopper grids, good tight disc driveline, has been repaired on chassis arms but fully operational. Also Kuhn Comete ZSA twin disc spreader with hydraulic on/off control, extended steel hopper holds 1200kg, cat 1 & 2 linkage so suit small tractor, good pto, in sound order for its age priced at £350 Good condition £475 % Chris C 01926 338639 S6611 FRAZIER Mounting frame To place Fertiliser spreader on back of Agribuggy c\w 2 hydraulic rams Good condition % Shaun 07850 978188 S6684 1999 KUHN Axera H Spreader parts 99 - 02 As follows : Setting Mechanism X2 LH R4072056 RH R4072058.

Disk Positioning X2 LH R4072056 RH R4072026. Mud flaps. Electric Rate Meters X2 R2044718. Agitator R4072078. Sensors (Speed) X3 R2009440. Motor Console X1 R3072018. Motor X1 072050. Valve Block R4072074. Cylinder R4072041.

Axera Box R2053163. White Box and Wiring R4072083. Grill- Middle. GrillSide X2. Hyd Hose and wiring Very Good condition £700 % Shaun 07850 978188

WWW.WRIGHTSREGISTER.COM

C6823 FRONT TANK System for liquid fertiliser (similar to Opico Nitrojet), consisting of front linkage mounted Knight 800 litre tank with Ford tractor weights in base for added stability, hydraulic motor driven 2 cylinder diaphragm pump with big filter & electric variable rate controller with in-cab RDS Spraymaster 200 unit, can operate at 100 litres/hectare using pressure based system, long delivery pipe to rear implement with couplings, all put together in last 2 years (new pump etc.). Could also be used with potato planter etc. Complete with single axle MF trailer chassis & pair plastic tanks mounted above, total capacity approx 3000 litres to act as bowser, hydraulic driven delivery/suction pump, pipework for both tanks etc. Rear steel lockable container for chemical cans or similar, can also be used as water bowser. May split Very Good condition £5,950 % Chris C 01926 338639 C6685 VICON RS-XL Rotaflow 1650 twin disc mounted fertiliser spreader, year 2000 model with hydraulic tilt ram for border work, good pto drive to gearbox currently set at 18m spread but comes with additional gear sets for different widths, all stainless discs and front deflector, hydraulic shut-off, adjustable rate settings, hopper with internal screens plus black hopper cover holds 3 x 600kg bags, road lights Good condition £1,295 % Chris C 01926 338639 S7066 STOCKS AG Micro Meter 6 Outlet Box type small seed and pellet applicator.

Suitable for rape, grass seed etc. 60 litre hopper. Requires 12v power supply to operate. Hardly used c\w books and some fittings Excellent condition £950 % Shaun 07850 978188 S6401 1996 KUHN MDS 1121 Twin Disc mounted Fert spreader c\w Hydraulic shut off and manual adjustment. Fitted timber hopper extension. OK 24M Good condition £1,000 % Shaun 07850 978188 S6832 AMAZONE ZAU 1501 Twin disc spreader c\w 12m & headland discs, plus hopper grids. Sound spreader well looked after. Good condition £700 % Shaun 07850 978188

17

FORKLIFTS & HANDLERS

W3457 1970 NU WAY BENSON McConnel Tail Slave TS 20 Rear mounted forklift. 1t capacity on forks. Fits onto tractor mounted sub frame Average condition % Chris W 01787 247286 S7108 2004 JCB

526s Telehandler c\w air conditioned cab, pick up hitch, Bucket & pallet tines.

17 R24 tyres 40%. Perkins quad engine on the back 3830 hours. Good condition £15,000 % Shaun 07850 978188 C6872 BUCKET Brush Agriquip model 2m wide new in 2004, hydraulic motor & chain drive to very good 22” diameter nylon brush, brackets & height adjusters with demount stands, all in red paintwork Good condition £895 % Chris C 01926 338639 S6285 1988 KOOI AAP RTWT Piggy Back Forklift, 3 wheeler designed to carry on back of lorry. Lifts 2 ton to 2.8m on telescopic tines. Sideshift, 4 cylinder Kubota diesel runs well. Hydro drive. 26.60 - 15.3 tyres. Good condition £2,750 % Shaun 07850 978188 W3535 SANDERSON

SB50 TC 2wd forklift. Triplex free-lift 4.5m lift mast. Ford 3 cyl. Engine, 6950 recorded hours. Torque converter transmission, 4 spools, 16.9/14-28 tyres, 50%. Starts on the button. Grain bucket and pallet tines £3,500 % Chris W 01787 247286 S6913 MANITOU MB25P Rough Terrain fork lift with 5.4m triplex mast fitted with Strimech hydraulic tipping backplate. 70% 15.5/80 -24 Drive tyres, 50% 10.5/80 - 18 rears. 5600 hours, good cab with all glass in . Good condition £2,250 % Shaun 07850 978188 S7077 SANDERSON SB50 TC 2wd Rough Terrain Forklift, Torque converter transmision, 4.5m Triplex mast. Full cab c\w glazing. 16.9 - 28’s 30 %, 11- 16 rears 70%.

3 Spools and tech ree. Good condition £3,250 % Shaun 07850 978188 C6941 MATBRO TR200 Telescopic Handler, 1996 model with Perkins 4 cylinder Phaser engine & torque converter transmission, 9680 rec hours, pivot steer type with Clarkworth axles, Goodyear 16/70-20 tyres approx 20% good tread, joystick loader control lifts 2.4 tonnes, rear pick-up hitch, front hyd service, all straight panel work/cab & fenders with some slight damage on plastic items. All fully working machine with good paintwork on smallholding Good condition £7,995 % Chris C 01926 338639 S6737 SANDERSON Fork Truck Bucket PM 35 for Sanderson rough Terrain & industrials with Quick Release Carriage and Double rams (Drilled to accept teeth and use as soil bucket.) 6ft wide. Good condition £675 o.n.o. % Shaun 07850 978188 S6947 1997 LANSING LINDE H30 D 3 Ton Industrial forklift with 4.5m lift. 3 cylinder Perkins diesel engine. 2.50/75-12 Solid rubber drive wheels. ROPS frame with Glass front and rear. Autostop powershift.

Well maintained Good condition POA % Shaun 07850 978188 S6946 1995 LANSING LINDE H40D 4 ton lift Industrial forklift, 2 stage 3.66m mast with sideshift. Perkins 4 cylinder diesel engine (7600 hrs). ROPS frame with front & rear glass. 2.50 - 15 solid rubber tyres Good condition £7,000 % Shaun 07850 978188 S5878 MOFFATT 2004 Lorry Mountable 3 wheeler forklift, 10ft duplex mast. Galvanised chassis & ROPS frame. 27-10-12 tyres. Very Good condition £3,500 % Shaun 07850 978188

C6958 SANDERSON

Teleporter 2 4wd/4ws telescopic loader, 1985 model with Ford engine lifts 2250 kgs, lever controls in cab, torque transmission, rear pick-up hitch, pallet tines with front service, 405/70-20 tyres all 70% good tread, recent front king pins & brakes refurb. Electric fuel lift pump & heavy duty battery leads, good straight panel work & all cab glass with good mast slides, 7017 rec hours on clock Good condition £6,950 % Chris C 01926 338639 W3432 HYSTER

SpaceSaver 70 Yard Forklift truck. 3t, free lift, mast to approx 20’. 6 cylinder gas engine. 2 speed manual transmission with clutch. Solid wheels Starts on the button.

Mast chains, bearings and hydraulics in good condition. No oil leaks. Good condition % Chris W 01787 247286

18

GRAIN EQUIPMENT

S7016 Plywood 8ft by 4Ft Grain walling sections made from 10mm ply with 100mm timber frames. Dismantled ready to move.

Good condition £50 each % Shaun 07850 978188 S6681 GALVANISED Ducts 121 6ft Galvanised steel grain laterals appx 15” tall by 16 wide at base 3” across the top. Plus 26 same 3ft long, some end caps. Very Good condition £6 each % Shaun 07850 978188 S6927 TIMBER Plywood Walling L Shaped, 8ft tall in sections, 3 of 8ft wide ,square. Clean 10mm ply over 2 by 4 timber framework. Good condition £200 % Shaun 07850 978188 C6657 SKANDIA & BRICE BAKER handling equipment ex grain store/drier. Skandia mechanical intake pit with drive over grid (size 2.5 x 0.9m), model KTG60-96 fitted 2.2kw 3 phase elec motor drive, capacity 60tph with total length of 8.4m & delivers at 2m above ground. Brice Baker ‘U’ trough auger, 6” flights with reversible flow (either direction), 8m long with 4 outlets, 3 phase elec motor & switchgear. Brice Baker GP straight auger 20’ long with 6” flights & 3 phase motor plus intake hopper. All taken out ready to transport Very Good condition poa % Chris C 01926 338639 S6279 TYPHOON LH Inlet Downdraft 15 HP fan suitable for mounting on top of grain tunnel outlet at 45 degrees. Good condition £400 % Shaun 07850 978188 S6235 REKORD RS 15 LH Inlet 3 phase fan c\w Switch gear, Took out ready to go Very Tidy. Plus 10.5 sections of 6ft by 6 by 3ft Ply over timber framed grain tunnel.

Each one fitted 2 flanges each side for 10” laterals. Good condition £800 % Shaun 07850 978188 S5192 BOSWELLS OF BLAIRGOWRIE 2 Screen Dresser 20TPH Pre cleaning dresser, 2 screen shoes with varous alternative screens. Mounted on platform in air.

7ft by 5ft6” by 6ft Tall. Plus extraction duct out. Good condition % Shaun 07850 978188 S6817 LAINCHBURY D25/ 10 Seed Dresser Timber framed, appx 5ft by 8ft by 8ft tall. A few screens, 3 phase. Very Good condition £350 % Shaun 07850 978188 S7087 MICHAEL WILLIAMS Streamline Dust Extraction system. Fitted 10HP 3 phase fan, 3 x 18” Diameter dust extraction socks. Various ducts for buyer to remove. (unit already out) Good condition % Shaun 07850 978188 S7042 CARIER Reception Hopper Steel Hopper installed in Ground with Chain Flight conveyer in centre to empty above ground level. Plus 45 Degree angleveyer and horizonatl Chain & flight conveyer.

Good condition % Shaun 07850 978188 S6256 LISTER Triaduckt 75ft of Galvanised steel grain tunnelling, 8ft tall including walkaway. Taper sides with outlets for laterals (70 by 40mm). Appx 125 Laterals avaialble 1.8m long. Good condition % Shaun 07850 978188 C6849 CRITAL Panels from set of seven grain silos, galvanised square section profile t ype removed & stacked on pallets ready to transport, Size 40” cover high and in two lengths of 3m (9’ 10”) & 2.7m (9’) some with top finisher sections & bottom starter panel attached. Total panels approx 100 (82 x 3m size) with corner posts plus some fixing bolts. 4 panels have grain outlet fittings attached. All very sound, price is for lot but may split to minimum 25 panel quantities Very Good condition £2,495 % Chris C 01926 338639 S6652 CRITTALL Grain panels Galvanised steel,10ft wide by apppx 30” Some in Situ some down, Priced accordingly Good condition % Shaun 07850 978188 S7007 HANSEATA Hamburg 48 Gravity Table Seperator, timber framework, 3 PH electric with Large Overcentre pulley to run at 105 RPM. Multi outlet. Overall size 12ft by 5ft. Average condition £800 % Shaun 07850 978188 S6901 LUNDAIN Portable Grain Stirrer 3 phase model with 3” Auger appx 5ft long.

Handle bar type manually operated. Very Good condition £2,000 % Shaun 07850 978188 S7040 GALVANISED 10” Grain laterals Perforated sides Suitable for tunnel fitment.

Both 3 Ft & 4 Ft Lengths. Appx 500 available Good condition % Shaun 07850 978188

19

GRASSLAND EQUIPMENT

C6944 TWOSE Buckrakes Flatback type suit tractor linkage or loaders, 12 tine model 7’6” wide with twin hydraulic ram operation & 10 tine 6’6” wide single ram model. Both have side tine facility but no tines fitted. Yellow paintwork stored undercover & only done non farm work at exhibitions (10 tine priceed at £565) Very Good condition £695 % Chris C 01926 338639

S6388 JOSKIN D280 CZ Pasture Topper, 2.8m Breed, Mounted Cat 2 Machine, PTO driven. Skid height controlled Good condition £1,250 % Shaun 07850 978188 C6877 LELY Splendimo 280LC mounted mower conditioner, hydraulic ram lift & lower cutting bed with 7 discs driven in pairs can operate at above & below horizontal, 2001 model 2.8m cutting width lateral drive system (shaft & belt), full width conditioner with nylon fingers & adj swath doors, demount stand, all fully guarded & skirted Good condition £2,495 % Chris C 01926 338639 S7116 FERRI F200 2M wide offset mounted Strawchopper / rough garss cutter. Seen very little use Good condition £475 % Shaun 07850 978188 S6352 1990 MACDON 3000 Trailed 7.5m wide Cutterbar Swather, knife cutterbar lays onto canvasses then out through centra swath 1.3m wide. End tows for transport.

Rare tool Good condition £5,000 % Shaun 07850 978188 S6595 Hayrake 6 Rotor Trailed rakes, choice of 2 just need donor Acrobats wheels to complete. Average condition % Shaun 07850 978188 S6889 TAARUP 337 Trailed mower with double yoke headstock drawbar, 10/80 -12 travelling tyres. Had conditioner originally but no longer fitted Good condition £1,500 % Shaun 07850 978188 C6704 KUHN Flail Topper model VKM 240 fiited rear roller & hydraulic slew ram to offset machine, linkage mointed 2.4m (8’) wide with 540 pto drive, front steel stone deflectors & rear rubber curtain, horizontal rotor fitted wide section swinging flail heads, tidy paintwork & all in working order Good condition £2,850 % Chris C 01926 338639 S6664 2009 OPICO 3m Sward Lifter Fitted 3 subsoiling legs with Discs and individual guttler 4 ring press modules on each leg. 2 spare sets of feet. Usefull bit of grassland kit hardly used Excellent condition £4,700 % Shaun 07850 978188 C6697 KUHNFLEX 4 Rotor hay & grass tedder, tractor linkage mounted with rubber skirted vertical drums fitted steel tines, model KE4 requires pto shaft & swath deflector arm. Suitable for spares or repair Average condition £475 % Chris C 01926 338639 S6794 MAJOR 6ft Topper Single rotor with blades, runs on skids. Recent Gearbox and paint. Good condition £675 % Shaun 07850 978188 C6771 VICON Andex 783 trailed twin rotor rake, Terralink Quattro model fully adjustable with hyd rams from 7.0m to 7.9m working width (operates easily with 3 x3m swaths), single backbone frame with hyd folding wings carrying tined rotors with 4 pneumatic tyres per side, lower link hitch attach to tractor allows rear machine wheel steering on connecting linkage. Purchased as ex demo machine in 2012 & done 2 seasons on small farm. All in full & complete working order with centre rubber curtain partly missing. Very Good condition £9,995 % Chris C 01926 338639 C6964 KVERNELAND Taarup 4240CT trailed 4 metre mower conditioner, 2007 model with centre pivot drawbar and cutting bed suspension, full width disc bed & steel flail conditioner, hydraulically adjustable rear swath spreader plate allows adjustment for tractor wheels on next bout, transport kit for road work, high output machine - late entry please phone for photos & more details Very Good condition poa % Chris C 01926 338639 S6523 BEAVER Trailed Gang Mower set of 5 gang mowers each 30”, hydraulically driven & folding. Good Standard heads, Cut appx 16ft. £3,800 % Shaun 07850 978188 S6863 RICHARD LONG ENG 1502 Versatile PTO Driven Trailed Flail Mower / collector with scarifying attachment. 1.5m cut with Rollers either side of flails. New Bearings and drive belts fitted. Collection Hopper tips at appx 1.4m high. Good condition £1,250 % Shaun 07850 978188 C6946 CARIER RL30 Weedwiper, 3m linkage mounted model with 6” diameter roller fed by full length felt impregnated dispenser, plastic chemical container & all mixing equipment, 12 volt pump, machine fitted on additional toolbar with wheels to assist good ground following Good condition £800 % Chris C 01926 338639 C6878 LSM M9 Grass Topper, tractor linkage mounted pto drive with 3 cutting rotors, 9’ operating width on adjustable side skids, gearbox & vee belt drives, large swinging blades on centre rotor shafts, flexi strap to top of ‘A’ frame allows machine to float, all fully guarded with green & black paintwork done little work Good condition £985 % Chris C 01926 338639 S5984 2001 KRONE AMT323CV Tariled 3.2m Mower condtioner with steel flails.1000 rpm pto. Tidy Green paintwork Average condition £1,750 % Shaun 07850 978188 S7037 WESSEX 9FT 3 Bladed Topping Mower, c/w depth skids & End tow kit with 2 wheels Good condition £975 % Shaun 07850 978188 C6770 KUHN FC313FF linkage mounted centre pivot mower conditioner, 2 seasons work only approx 400 acres/year, 3.1m (10ft) cutting width with 6 disc bed, rear nylon ‘V’ shaped conditioner tines with all adjustable swath deflectors, full protection skirts all very good condition, twin pressure gauge headstock unit for ground following ‘lift control’ floating cutting bed system, fold up demount stand, all very good paintwork.

Retirement sale - rare opportunity for excellent quality mocon Very Good condition £8,350 % Chris C 01926 338639 C6759 CLAAS Sprint 260P forage wagon, trailed self loading 1985 single axle model with 1.6m wide front pick-up reel, knife cutting system with rotary feed rakes, floor chain unload to rear, all complete with good tyres, unused recently so suitable for refurb or parts Average condition £895 % Chris C 01926 338639 C6937 QUANTOCK Grass Harrow 4 metre hydraulic folding version with 6 rows 8mm thick spring tines, new in 2009 & done little work all in very straight order, front pneumatic tyres on adjustable height wheels, twin ram operation. Ideal for moss extraction & grass aeration. Current new price £4700 Very Good condition £2,395 % Chris C 01926 338639 S6550 OPICO Hazenbichler 12m Hydraulic folding Grassland harrow, 8 section with rubber depth wheels Good condition £3,500 % Shaun 07850 978188 C6939 CHAIN HARROWS Tractor mounted 12’ wide with 2’ manual folding wings, chains from headstock to rear frame allow ground following, one complete mat 7’ deep in box section frame with all very good single sided grass harrow tines, red paintwork, done little work in straight order Very Good condition £650 % Chris C 01926 338639

APRIL 2014 37

• See also the wanted section and read the buying/selling details before calling

WWW.WRIGHTSREGISTER.COM

S6386 JOSKIN EB360 R3 Mounted folding grassland harrow. 3.6m Working width folds to 2.4m. Levells molehills dung etc.Cat 2 linkage Very Good condition £1,600 % Shaun 07850 978188 S4847 2006 ECKO 400 ES High Performance strimmer c\w auto nylon cord head.

Cracking tool. Less than half new price Very Good condition £120 % Shaun 07850 978188 C6938 VOTEX Grassland Topper 6 foot version with twin horizontal cutting blades, tractor linkage mounted, adjustable side skids, good pto, old but sound Average condition £350 % Chris C 01926 338639 C6961 MCCONNEL PT9 Grass Topper, linkage mounted 2.7m (9’) wide with pto drive to gearbox & belt drives, twin cutting blades with swinging end flails, adjustable height side skids, webbing straps to hitch A frame allow machine to follow ground contours, 2009 model with all good yellow paintwork been used for grass airstrip maintenance only on arable farm Very Good condition poa % Chris C 01926 338639 C6758 OPICO Bush Hog Flex-wing model 2615 heavy duty 15’ rotary topper, all gearbox & shaft drives to 3 section hydraulic folding ‘batwing’ system, swinging chain deflectors to steel decks, free swinging twin cutting blades on central dishes, solid rubber tyres on rear x 6. Wide angle pto drive.

Requires some small jobs before work Average condition £2,250 % Chris C 01926 338639

20

HEDGECUTTERS

S6387 BOMFORD 81 - 81 Barcket mounted swing round (LH > RH) 8m Hedger. In Cab electric multi joystick controls. 1.4m head. 540 PTO. In use recently.

Good condition £3,800 % Shaun 07850 978188 S6936 2010 MC CONNEL

PA 47 LH reach 3 pointed linkage mounted hedger, fully independent with 4 lever in cab cable controls. Boot flailed head with roller. Done very little work and kept inside.

Excellent condition £6,250 % Shaun 07850 978188 C6856 AGRIMASTER Hedgecutter Golden 48W model tractor 3 point linkage mounted & independent pump hydraulic oil supply to machine, 2007 model done very little work fitted 1.25m bracket mounted model T125R flail head allows adjustment on box section beam, ‘T’ section boot flails with rear roller, 5 spool lever controls to cab, 4.8m reach, built in oil cooler, road lights, all good paintwork Very Good condition £4,995 % Chris C 01926 338639 C6890 TWOSE TS526i LP tractor linkage mounted left handed hedgecutter with heavy duty top link, done farm work only, 5.25m (17’6”) reach with 100 degree power slew & parallel arm geometry, fully independent pto driven hydraulics, low pressure hyd proportional control in cab joystick with head in/out lever, 1.2m flail head heavy duty type with grass & hedge ‘T’ flails plus rear roller, 50hp reversible head motor & 240 degree rotation plus float, safety breakback, road lights (discounted new price now £17k) Very Good condition £9,600 % Chris C 01926 338639 S7035 2000 ORSI AC 6.5T Telescopic Swing Round hedger, Fully independant with 5ft boot flail head with roller.

6.5M Reach, In cab cable controls.

Swings round behind to transport.

Road lights. Includes as new 4 ft Cutter head for hedging if prefered. Very Good condition £7,250 % Shaun 07850 978188 C6679 BOMFORD Hedgecutter Flail head, Protrim 1500 model 5’ (1.5m) wide with own hydraulic motor drive (high capacity type) & belt drive to flail shaft, fitted ‘T’ section heavy duty flails, rear roller, box section mounting frame, done one season only on mid mounted machine note this is just a flail head for sale Very Good condition £3,850 % Chris C 01926 338639 S6395 TURNER Hydomower Bracket mounted Hedgecutter c\w 4ft 6” head.

Springback arm, 4 spool control block on adjustable arm. Medium Duty Flails Average condition £950 % Shaun 07850 978188

21

IRRIGATION EQUIPMENT

S7109 SYKES 6” Engine driven Pump appx 11,000 gpm c\w primer pump , Electric start hatz diesel. On 4 wheel chassis, Bauer 6” outlet. Recently overhauled Good condition £5,750 % Shaun 07850 978188 C6843 IRRIGATION Pumps Rovatti 2 stage pto driven linkage mounted pump with hand primer & Bauer fittings, 540 drive, all sat on framework. Engine driven rotary Capari pump mounted on trailed chassis (ex lorry), Mercedes ex combine 6 cylinder diesel engine under canopy with Murphy protection kit & rubber coupling direct drive to pump, hand primer & fittings, built in saddle fuel tanks require repair Good condition poa % Chris C 01926 338639 C6840 WRIGHT RAIN Irrigation Reels with alloy mains pipework, 2006 all galvanised model 110G500 Rainmaker twin adjustable axle type with hydraulic legs operated by tractor, solar panel Irrigamatic controller, turntable pipe reel with cross fill pipe & large filter, pto windback gearbox to turbine drive. Nelson ‘Big Gun’ variable angle 3 wheel gun trolley, side delivery pipe & set nozzles Also similar 100G450 model year 2000 with gun trolley & hand pump for leg hydraulics, single axle & Irrigamatic controls, this model priced at £4295 Very Good condition £5,995 % Chris C 01926 338639 S6584 AQUA Reel Irrigator o 3 small wheels, 25mm pipe, spining 2 outlet distributor Average condition £400 % Shaun 07850 978188

22

LIVESTOCK

C6831 CHESTNUT

Gelding Welsh 15 hands part bred rising 4 years just broken & riding well in the school & open fields. Oozes potential & would make a superb Show Hunter/Working Hunter pony & riding horse, dressage prospect. A nice stamp of a horse with 4 white socks, excellent paces, good temperament, no vices & clean legged. Good to catch, box, shoe, groom etc & used to farm machinery & dogs. Home bred out of a TB mare & Welsh Section D stallion (Royal Welsh winner Wishaw Revelation).

Excellent home required, more photos & training videos available plus ability to discuss regime with professional trainer/breaker. Passported, Microchipped & Welsh Pony & Cob Society registered Excellent condition poa % Chris C 01926 338639

23

LIVESTOCK EQUIPMENT

C6641 LIVESTOCK Pet Cremator/Incinerator made by J G Shelton & Co, installed new in 2000 and used in commercial animal cremation business.

Capacity up to 50kg/hr using diesel fuel (28 sec) and 3 phase electrics, Fully compliant free standing unit with footprint approx 10’6” x 6’, chamber size 4’6” x 2’6” and fitted with sluice gate type access door. Manual recording system, full control panel & uses small compressor for air control, twin burners, side fans, fire brick furnace, full vertical flue to outside.

Hand type ashes grinder. All in working order. Very Good condition £4,750 % Chris C 01926 338639 C6794 GRAYS Silage Grab model 245, serrated front blade & solid sides, twin ram type 1.6m wide with all good tight tines x 10, Manitou fittings plus hydraulic couplings on top rail, new in 1999 all very straight & tidy with good rams & some new tines, operator instruction book included Very Good condition £750 % Chris C 01926 338639 C6902 INCUBATOR Lincu Avitec model 864AT, single phase electric with auto turn trays in 6 decks, humidifier unit attached, auto control with variable settings, free standing unit 4’6”x3’x2’6” holds 864 hens eggs & approx 1000 pheasant eggs etc.

Complete with Hatcher unit with 4 trays to hold 192 hen eggs, single phase model number SIL 140 recently serviced. Both used on small holding purchased new 4 years ago to be sold together including operator books Very Good condition £1,595 % Chris C 01926 338639 S7075 Creep feeder In Galvanised steel, 8ft by 4ft with 4 wheels suitable for sheep.

Very Good condition £200 % Shaun 07850 978188 C6709 ALFA LAVALL Milking parlour equipment ex 20/20 system now dismantled. Items remaining are - Glass jars & ACR units, Candle jetter washers x 10, milk pump. ACR units are 12 x older version.

Please phone for more details Good condition poa % Chris C 01926 338639 C6918 CALF Creep Feeder galvanised panels on black box section painted frame, size 8’ x5’x6’ on skids, adjustable top bar to vertical entry spaces, good trough with hayrack & large opening top, tractor linkage & pallet tine handling facility Very Good condition £480 % Chris C 01926 338639 C3635 CATTLE TROUGHS to fit between 15’ stanchions or hang on to feed barriers, galvanised steel (14’9” long) construction with horizontal black plastic semi circular twin wall inserts (for feed trough), 18” wide 8” deep, quantity 6. Also hayracks to fit above if rquired Good condition poa % Chris C 01926 338639 C6897 GALVANISED Field/Yard Gates IAE Continental Cattle type heavy duty 12’ long with box section ends, vertical stays & 6 bars of 45mm tube, new unused with some fittings - quantity 3. Also single 14’ gate with fittings (like Stamford field gate) 7 bar type with 30mm intermediate & 45mm top & bottom round bars. All new unused stored inside, sold as one lot Excellent condition £460 % Chris C 01926 338639 S7074 BATEMAN Calf Creep Feeder c\w 3 Point linkage attachments to move. Galvanised steel panels with painted steel frame. Good condition £400 % Shaun 07850 978188 C6799 COTSWOLD Bulk Tank dairy hot water automatic washer unit, stainless steel with control panel, cold water feed, size 110 x 52 x 38 cms. Requires some refurb work (motherboard), 18 months old used with 2 tanks of 2000 & 1700 litre capacity Good condition poa % Chris C 01926 338639 S6911 THISTLETHWAITE Turnover Crush Hydraulically operated fully galvanized steel, with hydraulic belly belts to hold animal. Spool valves mounted on frame to operate. Can be Bolted to floor or mounted on tractor 3 point linkage. Very Good condition £5,950 % Shaun 07850 978188 C6903 PHARMWEIGH Lamb & Pig Weigher mobile weighcrate with full digital operation including auto control Drafting gate attachment unit, stainless steel construction with concertina end gates & adjustable side gate (for animal size), 12 volt operating system with readout & control panels on top section with aerosol marker storage trays. Can be used with hand held EID reader, all very straight fully working condition Very Good condition £3,375 % Chris C 01926 338639 C6901 FARROWING CRATES Set 4 free standing type qty 3 all tubular galvanised with opening sides actuated by sow standing on gas strut system with counterweight, adjustable rear gate, front trough & water supply, length 7’3” (6’ for sow). Green painted single crate all painted has legs to bolt to floor, rear gate, fixed sides, front trough, 6’ long for sow, little used. Sold as one lot Very Good condition £400 % Chris C 01926 338639 S6912 Tyre Scraper 8ft wide on 3 point linkage frame using one third of an earth mover tyre. Also12ft pusher blade to keep feed in check along feed passage. Very Sturdy build. Average condition £300 each % Shaun 07850 978188

C6930 IRONWORK Double sided shelter type mobile lamb creep feeders, overall size 6’ x 6’ fully galvanized steel with square profile corrugated roof panels, steel end wheels with handles at opposite end, 7 space openings with adjustable top bar for lamb size. Heavy duty quality make (WM Ironwork) all very straight & tidy.

Quantity 5, price is for lot Good condition £1,650 % Chris C 01926 338639 W3538 VARIOUS Electric fencing equipment including 4 electric fencer units, rope type fencing wire, insulators and posts. % Chris W 01787 247286 C6919 LAMB Creep Feeder shelter type single sided all galvanised, adjustable roller bar front entry, rear access lid to good full length trough & hopper, size 2.5m long & 1.4m deep Good condition £285 % Chris C 01926 338639 S7031 IAE Lamb Creep Feeders Galvanised steel, Converted to end tow with 2 wheels and one and drawbar at other. 89” Long by 43” deep Good condition £200 each % Shaun 07850 978188 S7072 Sheep pen gates Galvanised steel, 6 ft wide. Appx 20 some as new mostly very good. Stored inside Very Good condition % Shaun 07850 978188 S6849 Cattle Crush Portable Type, mounts on 3 point linkage to move. Has Small gate one end and full yoke gate at other with bar stops etc. Detachable timber floor. 8ft by 33” Good condition £350 % Shaun 07850 978188 S6564 CLARK Feed Pump 2.2 Kw on stand (3ph) 2820 rpm 4.5 amp, also similar Brook Crompton Pump and 7.5 kw 3 ph Pump Good condition % Shaun 07850 978188 C6750 CREEP FEEDERS non shelter Lamb type double sided with adjustable feed openings, 8’ long galvanised steel with strong timber lids, mobile with end wheels & stands - quantity 5 to be sold as one lot Good condition £595 % Chris C 01926 338639

24

LOADERS AGRIC/ INDUSTRIAL

W3433 BOMAG K301 Sheeps Foot Compactor. Cummins V8, 3 speed powershift.

Hydraulic blade. A large and formidable piece of kit! Average condition £6,450 % Chris W 01787 247286 S6923 JCB Digger Buckets Choice of 2 Genuine JCB Buckets, 1- 3ft c\w new blade, no teeth. And one 6ft Dyking bucket. % Shaun 07850 978188 S6871 1995 AGRILIFT 7m 2600 KGs Lift Telehandler with 4 wheel steering axles, 380/70 -20 tyres. Only 4500 hours. Pallet Tines & Bucket Good condition £6,950 % Shaun 07850 978188 C6535 SANDERSON Bulk Bucket ex Rough Terrain Forklift, 8ft wide, 3’6” high & 4’6” deep, twin ram tip on backframe with fitting to suit pallet tine rail - could easily be modified to have brackets welded for other fitting type, yellow paintwork, bucket in all sound order Good condition £695 % Chris C 01926 338639 S7127 1998 BAC Toe Tip Bucket 8ft by 4ft 6” deep by 5ftr 6” tall with good replaceble blade and brackets for JCB or Volvo Shovel. Good condition % Shaun 07850 978188 S6704 INTERNATIONAL 3434 Industrial loader tractor complete with power loader and twin cylinder compressor on back. 6ft power bucket, Pallet tines and muck fork.

70% 14.9 - 24 rears. Single door cab Good condition £2,300 % Shaun 07850 978188 S6705 FORDSON Power Major Fitted Sturdy Power loader, roll frame, 70% 11- 36 tyres, cast fronts. Power Steering, Very Good runner Good condition % Shaun 07850 978188 S6899 MUIR HILL A 5000 4wd & 4 wheel steering Loader with Perkins 6.354 engine, Runs well appx 6000 hours. 15.5 - 25 tyres between 10 & 50% All Glass in cab. Framework to carry attachments Good condition £3,950 % Shaun 07850 978188 C6923 LOADER Implements - Chillton Manubal round bale handler, tubular vertical hydraulic ram operated opening side arms suit squeezing wrapped round bales (operates like your hand, does not pivot), Matbro fittings. - Slewtic 8 tine Sheargrab 4’ wide with solid sides, serrated front & side blades, twin ram system, Euro/Quicke loader fittings. - Cherry 9 tine Muck fork & grab, 7’6” wide, good rams, Matbro fittings, requires new tine base plate & some grab tines Good condition poa % Chris C 01926 338639 W3426 KOMATSU

D53S-17 Tracked Drott. 110hp, 3 speed powershift, 4-in-1 bucket. Heavy duty loading shovel. Track gear good. No ripper.

8300 recorded hours. Has had replacement engine. On farm use only recently.

Good condition £12,500 % Chris W 01787 247286 C6828 MASSEY FERGUSON Beet Bucket to fit 80/880 model power loader, 5’6” wide & 2’6” high, done little work & all straight with good bottom tine bars, paintwork dull Good condition £165 % Chris C 01926 338639

25

MILL & MIXERS

C6825 BENTALL Roller Mill with single phase electric motor drive, twin 5” wide 12” diameter rollers, grooved single driven roller, requires guard to belts, model type 1207, unused for a while but rollers run freely, small hopper above Average condition £465 % Chris C 01926 338639 S7043 1994 CARAVAGGI 120 - M Trailed mobile PTO driven 120 hammer mill with 2.5 ton Mixer. Features long high level discharge spout. Not Used Recently but Very Soild. Single Axle to transport Good condition % Shaun 07850 978188 C6694 FRASER FB7 Roller Mill on stand with steel feed hopper above (approx 1.5 ton capacity), 3 phase electric motor drive, 7” wide rollers 15” & 9” diameter need regrooving. With Bentall 1/2 ton vertical mixer & short auger from mixer, bottom bearing needs replacing but otherwise sound Average condition £845 % Chris C 01926 338639 C6905 ALVAN BLANCH M90 1 tonne horizontal chain & slat mixer, 3 phase 2.2kw electric motor drive, can have auto pulsing system utilised, recent new chain & slats plus sprocket drive, all in sound order but no mill attached Good condition £900 % Chris C 01926 338639

S6729 SIMON BARRON 125 series Extruding Press to make 6mm diameter pellets of Wood chippings Appx 20mm long.

Plus Seperating Cooler to cool after pressing, Miracle Hammer mill with hopper over to prepare And Simon Barron (Paul Clochem) Type 200 -6 Verical dryer if woodchip is Damp. Set up as production line Very Good condition £35,000 % Shaun 07850 978188 C5982 MARTIN MARKHAM Roller Mill free standing with small top hopper, 15” diameter rollers 5” wide with flat belt drive (from tractor pulley), could easily be converted to electric motor & vee belt system £325 % Chris C 01926 338639 S6563 BRITON Christy & Norris LB4 Hammer mill, 4” screen inc spares, 2920 Rpm 3 phase 12.5 hp motor. Dismantled for inspection and removal. Average condition % Shaun 07850 978188 C6926 ROWLANDS Steel Hopper on long legs suitable for use over mill & mix machine (approx 1 tonne capacity). Last used with 1 tonne mixer & includes President trip weigher (model P5GDE) & straight 24’ long 3.5” filling auger Good condition £495 % Chris C 01926 338639 C6892 HAFER BOY Universal 40 Roller Mill, 4kw 3 phase electric motor drive converted to double powered rollers (good for beans etc.), 10” dia & 5” wide approx stainless rollers, lever operated feed flap & roller adjust, currently used on track system under feed bins to fill big blue barrels with dust extractor hose but can be wall mounted with bag clamp Good condition £545 % Chris C 01926 338639 S7073 SILOS AND STORAGE SYS Meal Mixer In Galvanised steel uses 45 degree auger bottomed hopper to mix, driven by split phase motor. Only 7ft 6” tall. Also Bentall 4” Roller mill with small hopper & split phase motor. Very Good condition £975 % Shaun 07850 978188

26

MISCELLANEOUS

C6865 WORKSHOP Crane (engine lift) heavy duty model with extending arm, made by CAM on 4 castor wheels, hand pump hydraulic lift ram, all box section easy to manoeuvre, end hook will reach over frame limit, approx 1 tonne lift at short arm Good condition £225 % Chris C 01926 338639 S6261 6 Cylinder Lorry Engine mounted on stand c\w Radiator, Fuel tank & 4 gearbox with PTO drive out. Suitable for driving fan etc. Good condition £700 % Shaun 07850 978188 S7020 RAYBURN Combination cooker Oil Fired, Heats hot water and radiators plus cooks. Cream enamel finish. Taken out but still in 1 piece, wrapped ready to go Good condition £1,200 % Shaun 07850 978188 C6684 PERKINS Engines pair 6 cylinder diesel non turbo ex commercial vehicles, 6.354 type (one later 6.354.4) non running but believed to be all complete (some components loose). Ideal for use in irrigation pumps etc. or for spares. Price is for pair Average condition £560 % Chris C 01926 338639 W3435 Moving Floor Bulk Hopper 10t capacity with rubber belt floor driven by 3 phase motor. Ajustable shute. Suitable to feed veg washer or bulk bagging set-up. poa % Chris W 01787 247286 C6751 BEMA Agrar Rotary sweeper, tractor linkage mounted for front or rear, 2.3m working width complete with detach steel tipping collector box, swivel headstock, hyd motor drive to good 18” nylon & steel brush, pair caster wheels on rear, demount stand. Done little work Very Good condition £1,125 % Chris C 01926 338639 C6929 PROFILINE 431 pto drive tractor mounted woodchipper, 2004 model with swivelling deck allows machine to operate at different postions to tractor, large hopper with safety trip bar, adjustable top chute, pair new blades, can take up to 11” timber, 540 pto drive, hopper extension folds for transport, free standing off tractor. Heavy duty machine all in full working order Very Good condition £5,450 % Chris C 01926 338639 C6764 B AND K 4 Bank industrial spec pressure washer system suitable for operating 6 hoses in separate locations simultaneously on demand. Hot & Cold facility with recent new Lochinvar water heater & tank rated at 132kw (450000 Btu). Compressor air tank Class 2 capacity 272 litres at 16.5bar pressure, vertical type painted black with adjacent air drier unit (no compressor). Heavy duty workshop tools including Hitachi hammer drill 950W in steel case, Hitachi variable speed drill in case both 110v, bench grinder twin wheel model as new in box Good condition poa % Chris C 01926 338639 S6920 PERKINS 248 Engine Ex MF 487 Combine, Recent complete overhaul. Removed on frame c\w fuel tank, Radiator & control panel. Very Good condition % Shaun 07850 978188 C6819 TREE STAKES Timber round posts suitable fruit trees etc. size 3m long & 5 to 7 cm diameter, all creosoted treated some with points. Can be used as individual supports or to make post & wire avenues (some anchor wire units also available). To be sold as packed in bundles of 100 (price is per bundle) Good condition £450 % Chris C 01926 338639 S7068 PEDESTAL Grinder Twin 9” Stone wheel grinder, Suitable for workshop use on Adjustable height pedestal. Single phase. Very Good condition £125 % Shaun 07850 978188 S6875 100 Kva Cabinet installed generator with John Deere 140 HP diesel engine.

3 phase. Good condition £6,500 % Shaun 07850 978188 S7070 QUALTERS AND SMITH 180A Sawmaster 3 phase powered bandsaw for steel cutting c\w workvice, powered head lift etc. Industrial quality machine. Also Pehako Bandsaw, more basic spec, 3 phase, POA. Good condition £600 % Shaun 07850 978188 C6933 RINGROSE 40 KVA pto drive Generator, model Genitrec Mk 2 with gearbox drive from 540 pto shaft (shaft included), free standing unit will bolt down, 3 phase electric can also supply single phase, all dry stored with good gold paintwork & including changeover switch unit Good condition £575 % Chris C 01926 338639 C6721 SWIFT Challenger 470/2SE Touring Caravan, 2 berth single axle 4.7m long fully fitted with shower & built in cassette WC, double glazed windows, electric & gas appliances including water heater, room heater, hob & oven, fridge etc. recent new 12 volt battery & water pump, all good tyres with new spare, mains elec hook up lead, Calor & Propane regulators, water & waste containers tow hitch cover lock. Quality caravan with lots of storage space suit student or as a holiday tourer, includes awning Good condition £1,150 % Chris C 01926 338639

S6518 MABE Cardboard Baler 3phase Hydraulic powered press to compress packaging etc. Industrial stationary type Good condition £7,000 % Shaun 07850 978188 W3521 2003 DESIGN Hydraulic Power Pack See Specials for details. £3650.00.

Suitable for running Mini bale wrappers.Call for more details Very Good condition % Chris W 01787 247286 C6765 WEIGHBRIDGE Avery drive over steel type with concrete infill, in ground bridge rated at 50 tonnes, 15m long 3m wide one piece to take artic trucks. Model J105 with L225 electronic controls & ticket printer etc. New in 1996 & fully compliant.

Drawings available for groundwork process, requires 2 cranes to lift in one piece (weight 33 tonnes). Reinstallation costs etc. all available. Quality commercial weighbridge not to be confused with lightweight occasional use farm types. Price below is as it stands now currently installed working with all equipment. Good condition £3,395 % Chris C 01926 338639 S7069 MIGTRONIC Automig 250 Mig welder, 3 phase, 250 amp, c\w sound welding nozzle & cables. Good condition £125 % Shaun 07850 978188 W3539 VARIOUS Workshop Tools 3ph arc welder, Spaldings band saw and portable compressor, pillar drill and bench grinder. poa % Chris W 01787 247286 S6297 HOES Drainage Machine Self propelled, hydrostaically driven unit on 16” tracks with Ford engine. Comes with 7ft 100mm Draining chain. Plus Seperate clean up conveyer 8ft by 19” and filling slitter. Average condition £7,500 % Shaun 07850 978188 S4735 BOM Post Hole Borers Hydraulically driven to fit on Forklift tine. 6”, (Opt 9” & 12”) Easy to fit & use prices from New condition £1,200 % Shaun 07850 978188 W3540 Trailed road/paddock sweeper with collection hopper. Pto driven. Older machine. poa % Chris W 01787 247286 C6896 SPALDINGS Workshop Compressor made by C &H compressors, model AP28, TA80. Believed to be 28cfm with a 205 litre tank, twin piston belt driven compressor unit from 3 phase elec motor, 150 psi SWP, free standing with horizontal steel tank size 5’ x 18”, safety checked on farm 2013 Good condition £395 % Chris C 01926 338639 C6917 HYDROVANE Compressor trailed mobile unit fitted twin cylinder Deutz air cooled diesel engine driving Aerzed compressor, 24cfm at 9 bar, grp lift up cover, 155/80R13 tyres, ring hitch, lights, hose, electric start, working machine blows light mist of oil with air (compressor needs attention) Average condition £500 % Chris C 01926 338639 W3465 POSTMASTER 8000 Post Driver Has been used on a skid steer loader and would suit a telescopic loader or tractor. A compact machine that uses a hydraulic drop hammer that gives fast impact (50 per minute)as opposed to brute force! Very Good condition poa % Chris W 01787 247286 C6436 LINCOLN Mobile Arc Welder, 300 amp SA1 model, Ford 4 cyl industrial diesel engine, road going with ball hitch, jockey wheel, 4 wheel type requires mudguards, also needs lighting board if used on road Average condition £575 % Chris C 01926 338639 C6915 BOMFORD Snowplough with 6’6” wide angled blade on subframe with hydraulic ram raise & lower system, fitting brackets go under front of tractor from weight frame bolts (last used on a Ford 6600 tractor). Blade jockey wheels at rear plus facility to fit rubber bottom blade Good condition £425 % Chris C 01926 338639 C6954 PARMITER Post Bumper Contractor model, linkage mounted with chain actuator to moving weight, hydraulic ram fitted in place of screw adjuster for mast levelling, post clamp system, operates at 90 degrees to rear of tractor, all fully working. Good condition £675 % Chris C 01926 338639 S6566 BROOK CROMPTON Electric motors Varous all 3 phase including 1.5 Kw 1435 rpm, 2.2 kw 2840 rpm, 4kw flanged 144 rpm, 0.3 Kw 940 rpm. 3 kw, 1420 rpm, damaged fins, no cover. AEC 1hp 960 rpm. Good condition POA % Shaun 07850 978188 S6837 TRANSWAYS Phase Converter Will convert single phase from a 64 amp 1ph supply to up to 15HP 3 phase. Usefull unit appx 0.5m by 0.3m in size. Good condition £450 % Shaun 07850 978188 C6920 KING HITTER Post Driver Series 3 model full specification made by Fairbrother (New Zealand), 3 point linkage mounted with hyd top link to 12.6” mast, hyd side shift ram, 250kg weight on cable actuation hits post support block, counterbalance weight, 5 x rear spool valve operator controls, demount stands, new in 2006 with all good paintwork. Contractor spec will earn its keep Very Good condition £4,295 % Chris C 01926 338639 C6646 DANLINE Brushmate Rotary Brush/Sweeper, 3 point tractor hitch to fit front or rear linkage, pto drive to good 18” diameter nylon & wire brush 6’ wide, swivel head allows left & right angling, built in water tank for use as dust suppression, caster wheels to assist level working Good condition £1,250 % Chris C 01926 338639 S6702 TELEGRAPH Poles Appx 28ft long 10” at base appx 40 Good condition £45 each % Shaun 07850 978188 S7078 PETTIT Ramps Pair Of Heavy Duty Trailer backing ramps to gain access to hopper etc. 8ft by 4ft by 12” lift Deck made of 3/4” Plate. Serious stuff Very Good condition £800 % Shaun 07850 978188

27

MUCK & SLURRY EQUIPMENT

S7126 2006 MARSHALL 105 10.5 Cubic meter Barrel spreader c\w hydrauilic top lid.

540 PTO, 90% 15.5/70 R18 tyres. Done littele work and stored under cover. % Shaun 07850 978188 C6873 FRASER Muckmaster 1250T side discharge rotary muck spreader, twin axle 1998 model with leaf springs & hyd brakes, 16.0/70-20 tyres, 12.5 cu/yd capacity with hyd lid & good spreading chains & flails on square drive shaft, fully guarded pto, road lights, working machine all sound barrel & chassis with some paintwork rust areas Good condition £2,250 % Chris C 01926 338639 C6766 LINCO Rotary Screen Separator unit located on high galvanised steel gantry for trailer/vehicle access underneath, unit size 3m long & 70cm (28”) diameter 3 phase electric motor drive. Exit chute on end of gantry platform, good quantity of large bore feed piping, currently utilised as feather screen in poultry processing unit but can have other uses. Installed & in working order Very Good condition £3,375 % Chris C 01926 338639

• See also the wanted section and read the buying/selling details before calling

38 APRIL 2014 C6762 FLYGT Chopper Pump model 3152F (M25 490mm), high capacity farm type with 13.5kw 3 phase electric motor drive. Also 3kw smaller model with 10” x 2” chopper impellor, stainless end section, will cope with poultry feathers Good condition poa % Chris C 01926 338639 S6682 SLURRY Stirrer PTO driven type c\w cat 1/2 linkage to mount on tractor.

Appx 14 ft long. Soild and straight for age Good condition % Shaun 07850 978188 S7029 2010 K TWO DESIGNS

Duo 1200 Mk 1V Single axle 12 Ton Manure spreader with 2 Vertical beaters, HD Floor chain, Intermediate slip clutch, Side ladder, Top protection boards, Road lights on 90% 580/70 R38 tyres Excellent condition £17,000 % Shaun 07850 978188 S3202 1994 BRIGGS Agric Eng Ltd Scroll & Slater PTO driven Slurry pump on Galvanised framework with 8” feed & 6” outlet with priming pump & electric shut down control. 80 cubic mtrs/min (18000 gpm) Very Good condition £2,200 % Shaun 07850 978188

28

PLOUGHS

S6311 2000 NAUD 8 Furrow Semi mounted Hydraulic Autoreset plough. Pair of 400/65 - 22.5 depth tyres after 5th furrow. Good long DD type bodies, Manure skims and Claydon furrow cracker. Cat 3 drawshaft. Suit up to 300HP. Manual varaible width. Good condition £9,750 % Shaun 07850 978188 C6590 DOWDESWELL DP7E/1 reversible 6 furrow (5+1) plough, 1993 model 14” furrow width & 39” point to point long clearance, 27” underbeam clearance to shearbolt legs fitted UCN bodies & reversible points, full set skimmers, hyd front furrow adjust, shock absorber depth wheel with wide tyre, some welding on frame mainly between 2nd &3rd furrows, good straight plough with mixed wear on metalwork but comes with large quantity new parts retail value £1300 Good condition £3,295 % Chris C 01926 338639 S6999 1996 KVERNELAND LD85 - 160 8 4 Furrow Mechanically Variable width plough, good No 8 bodies and wrap round landslides. Good lanslides. (Some parts of an extra furrow incomplete) Kverneland double ring press minus arms extra if required. Good condition £2,500 % Shaun 07850 978188 S7067 LYNX Double ring press C\w Lemkin Hydraulic release press arm (as new). 27” 30 degree rings. 8ft wide with baskets of rings to add weight. Very Good condition % Shaun 07850 978188 S5202 DOWDESWELL Furrow press Standard Double ring press without arm but in very sound order. Suit 5 x 14” furrows. 30 degree 650mm Rings 200mm apart. Good condition £425 % Shaun 07850 978188 S6569 DOWDESWELL Skimmers To Fit DP7 D2 Hiclearance plough, Set of 4 % Shaun 07850 978188 S7086 3 Furrow Conventional plough with modified headstock to offset for ploughing out hedgebottoms. 2 discs, 10 -12” furrows Good condition % Shaun 07850 978188 C6834 DOWDESWELL 120 Series MA Delta Furra reversible 5 furrow (4+1) plough, 1997 model fitted DD bodies & rear long arm discs, full set skimmers plus blade shares, hydraulic front furrow width adjustment, manual furrow width adjust, 36” point to point & 31” underbeam clearances, wide 10” rear depth wheel tyre, all good plough metal with original mouldboards showing some end thinning, very straight plough recently used on black fen soil Very Good condition £5,750 % Chris C 01926 338639 S6763 DOWDESWELL DP7 E 5 furrow (4 plus 1) 14” Reversible, Good UCN bodies & Manure Skims Average condition % Shaun 07850 978188 C6572 DOWDESWELL DP7E Reversible 6 furrow (5+1) mounted plough, 1986 model 12” furrow width with YCN pitch adjustable bodies, reversible points, full set skimmers, hyd front furrow width adjustment, 10.00/80-12 rubber depth wheel on damper type bracket, 34” point to point & 26” underbeam clearances, small welding repair on main beam at 4th to 5th furrow, some mouldboards worn but recent all new wearing metal fitted (points, wings, shares etc.). Some spares include new landsides, possible rear disc set also available. Good condition £2,800 % Chris C 01926 338639 S6950 JOHN H RUNDLE Double ring Press 54” Wide 14 Ring press. Each ring 26” (30 degree) Comes complete with linkage to carry plus simple plough arm Very Good condition £375 % Shaun 07850 978188 S6996 1996 DOWDESWELL DP 160S 7 Furrow Double Offset Reversible plough to suit Challenger, SCN Bodies, adjustable Skimmer legs, 10/75 -18.3 wheel with new bushes. 3ft point to point 28” Underbeam.

Modded headstock. Good condition £7,950 % Shaun 07850 978188 S7092 2004 DOWDESWELL DP 140 MA 6 Plus 1 (7) Furrow reversible plough with manual 12 - 18” furrow width. Hydraulic front furrows, adjustable Manure skims, Good DDS bodies on unmarked frogs. Well mounted 10/75 - 15 depth wheel. Scaloped rear discs Very Good condition £11,500 % Shaun 07850 978188 C6339 DOWDESWELL Furrow Press adjustable model currently set to follow 5 x 14” furrow plough, 700mm diameter 30 degree cast press rings 11 at front & 10 at rear (spare average ring to make 22) in 88” wide frame, cleaner chains, 3 point hitch frame for transport, hardwood bearings model which have been replaced with genuine type Average condition £750 % Chris C 01926 338639 C6820 DOWDESWELL DP7E reversible 5 furrow (4+1) plough, fully refurbished approx 2005/6, UCN adjustable pitch type bodies, rear disc coulters, full set square shank skimmers, 12” furrow width & 34” point to point clearance, hydraulic front furrow width adjustment, later type large depth wheel, all wings & points good, mouldboard metal starting to thin at ends but life left in them, good paintwork all straight plough with no welds Very Good condition £3,250 % Chris C 01926 338639 S6491 1997 DOWDEWELL Furrow Press 2 rows of 30 degree cast rings appx 100” working width. Completely rebulit last year at a cost exeeding £2000 Very Good condition £1,000 % Shaun 07850 978188

S6568 DOWDSEWELL DP 9 7 furrow semi mounted plough, in the furrow with swivel headstock, ycn boards and vari width Good condition £1,500 % Shaun 07850 978188 S6963 LEMKIN RL 3 Furrow Single acting Sprung return Reversible Average condition £400 % Shaun 07850 978188 S6421 1996 NAUD RX3 - 09 + 1 3 + 1 ( 4) 14” Furrow reversible plough , 38” point to point, 29” underbeam, Original digger bodies still very good , manure skims & depth wheel. Very Good condition £2,900 % Shaun 07850 978188 C6347 GREGOIRE BESSON SPWB semi mounted 10 furrow (8+1+1) reversible plough - recently converted to operate as a 6 furrow with bolt on sections to make up to 10 furrows, bar coupler headstock, hydraulic front furrow adjuster, bolted variwidth (6 position) furrow width, full set skimmers, rear discs, 16.0/70-20 rear land wheel tyre, all good mouldboards & tidy paintwork, demount stands, stored inside.

Full set new points included. Very Good condition £7,450 % Chris C 01926 338639

29

POTATO HARVESTERS & PLANTERS

S6820 2010 AVR Rafale Front mounted Potato topper c\w RH outlet cross conveyer. Choice of 2 Very Good condition % Shaun 07850 978188 C6908 GYMNAST 91-2 single row tractor linkage mounted potato harvester, front diablo split shares & discs to good 45mm continental web on lifting section fitted on brackets to o/s of tractor. Picking off area behind tractor for 4 persons with rubber covered continental web leading to cart elevator attachment, bagging off module for 2 bags displaces cart elevator if required, pto & hydraulic motor drives, bowden cable controls (need attention), all in good order ideal earlies or small acreage/farm shop use Good condition £1,695 % Chris C 01926 338639 S6988 NOBEL “S” Plantmaster 2 Row planter on cage wheels with disc coverers, suitable for a variety of planting jobs. Old but all there Average condition Offers % Shaun 07850 978188 C6639 ROBOT 2 Row potato planter will plant other bulbous items in ridges, tractor linkage mounted with single 6.00-16 drive wheel. Chain & sprocket driveline (spare sprockets) to twin horizontal rotating heads with cantilever cups fed by 2 operators on rear seats, carrier box for chitting tray type system, rear ridging bodies, adjustable width currently set at 32” centres. Ideal plot work machine or for small acreage etc. can suit smaller tractor Good condition £475 % Chris C 01926 338639 C6782 GRIMME GB Two row trailed harvester, 36” wide continental webs with scrubber, split front shares, steering ram, adjustable axle, high top picking off table under canopy with frame, long cart elevator slews over front of machine for transport.

Unused & dry stored for a few years so suitable refurb or parts. Also Grimme Continental 89 two row harvester with front diablos & twin disc system, continental webs & clod fingers, treaded tyres, fold up cart elevator - again suitable parts or refurb poa % Chris C 01926 338639 S6028 SCOTT GRIMME QRS 2 Row Unmanned harvester, 2 Full diablos, 4 discs, 2 2 piece shares, clod fingers, Ist web elecric agiatation, Rear wheel steering Dahlman rollers unmarked. Electric in cab controls. Very Good condition £2,300 % Shaun 07850 978188 S7080 FERRI F200 Straw chopper or Potato topper as configured. 2m Breed. 540 rpm. Very Straight. Rear mounted. Good condition £1,200 % Shaun 07850 978188 S6521 AMAC LKU 1700 1.7m Wide front monuted topper unit c\w cross conveyer.

PTO driven Good condition % Shaun 07850 978188 C6421 KEYAG Gruse 2 row mounted potato planter model VT20B, large steel hopper with hyd ram operated front plate for sloping/sidling ground, front openers adjustable width (currently set at 34” centres) plus side plates with rear forming bodies, drive wheels with good tyres, rubber belt drive fitted plastic cups, variable rate sprockets. Tidy machine for age Very Good condition £475 % Chris C 01926 338639 C6455 HASSIA 2 Row linkage mounted potato planter in green & red Pettit colours, front openers with following forming discs, 3 sets rear ridging bodies mounted on square section toolbar, twin tyred drive wheels, large steel hopper with twin cup & belt delivery system per side. All adjustable for planting width, in good order kept dry stored & will go straight to work Average condition £350 % Chris C 01926 338639 S6136 KEYAG GRUSE VL18 BM 2 row mounted automatic planter. Fitted Rigid Bodies, electric monitor, Cup inserts, Coulter wheels. 10/80 -12 wheels Good condition £950 % Shaun 07850 978188 S6856 REEKIE Cleanflow 2000M4 2 Row unmanned hravester with Cart elevator replaced with a 1.8m By 0.8m Conveyer to Windrow crop 2 rows across. 40mm first & 2nd webs. Good condition £2,000 % Shaun 07850 978188 S6805 2009 AVR Esprit 2 Row Offset drawbar Wheeled drive harvester, 1700mm main web 50mm pitch. Crossflow Evolution cleaning system and Picking off table with canopy. Exceptional machine, also 2010 model without picking table Excellent condition % Shaun 07850 978188 W3471 1996 STANDEN

H200 Big Boy Potato Planter Type BB2, 2 row planter can be used for ridges or bed system. Bulk hopper and cup type feeders.

Electric controls and ridging bodies. Machine has done very little work, is in very good condition and stored under cover.

Very Good condition £2,950 % Chris W 01787 247286 S7084 GRIMME Bagging Set for Allrounder Full rig including Bagging conveyer part web, part roller and short elevator. Fiscbein Fixed head hydraulic driven stitcher.

1992 Pearson nu pack No 3 bagger. Various fittings. Good condition % Shaun 07850 978188 S7064 STANDEN H240 Big Boy planter 2 Row Automated Belt fed planter with hydraulic depth on 10/80 - 12 tyres. Hood Coverer. Good condition % Shaun 07850 978188

S7012 2007 GRIMME

C6181 DOWDESWELL End Tow kit to fit power harrow, drawbar section with mounting plates, end wheel section fitted 8.50R10 tyres & hydraulic d/a ram for lift/lower of machine, all painted green Good condition £360 % Chris C 01926 338639

32

GL 32 B 2 Row Autoplanter with Hydraulic depth control, Hydraulic lifting hopper extension. 7.50 - 20 tyres, Hood coverer for 34” Rows. Recent Belt cups. Grimme GBT850 Electric control box to vary rate & stop etc. Applicator nearly new and could be separated as required. Excellent condition £13,750 % Shaun 07850 978188 S7008 2013 AVR GE Force 4 x 85 Double Drive Hook Tine Cultivator, 3.5m wide, fitted 4 - steel wheels, Hydraulic Markers, Vibrating Hood, with Hydraulic automatic ridge pressure control.Suitable for 4 rows 34” (85 cms) Only 80 acres on kind land so hardly used. Excellent condition £19,500 % Shaun 07850 978188 S7096 2007 STANDEN PEARSON BB4 4 Row Potato planter fitted stainless steel shares and sideplates, radar depth control, Belt feed cups, Stainless steel hood coverer, Spare wheel and optional Team Applicatot kit with Amstar Spray nozzles. Very Good condition £14,750 % Shaun 07850 978188 S7046 GRIMME Bedtiller To prepare 2 Rows c\w Grimme toolbars and Ridging bodies. Made by Howard substantial machine. Excellent condition £3,000 % Shaun 07850 978188

30

POTATO/BULB GRADERS & EQUIP

S6075 TONG Caretaker 48 48” Inline grader c\w own hopper, 5 rows of cleaning stars with own cross conveyer, Single screen grader with own 3ft wide cross conveyer. Roller table with soil extraction conveyer underneath. 3 Phase variable speed, rewired recently Good condition % Shaun 07850 978188 S7013 H K TIMBERS Scotch 1 Ton Potato Boxes, 6ft by 47” by 37.5”, palletised, 6 Board 1” gap, Straight and tidy, good enough to stack 7 high. Very Good condition £35 each % Shaun 07850 978188 S7009 1985 TONG Caretaker 36” All in one Grading line with own hopper, cleaning web, 36” Screen with cross conveyer, Flat belt and roller picking table with soil chutes and underconveyer. Fully covered and 3 phse variable speed. Good condition £5,000 % Shaun 07850 978188 C6818 BOAT HOPPER to suit grading line, mobile on wheels 5.3m long & 2.2m (7ft) wide all steel with opening end & side panels for loading with trailers etc. 700mm wide flat conveyor belt in base with single phase electric motor drive, raised sides at discharge end, painted yellow possibly made by Peal Good condition £1,195 % Chris C 01926 338639 S5246 2000 TONG Flat Belt Conveyer Choice avaiable Inc 300mm 3 - 6m long.

550mm by 2.6m. 650mm by 2.8m, 3.8m, 4.5m & 6.2m. 700mm by 3 & 3.6m. All with 3ph motors, some with legs. Very Good condition % Shaun 07850 978188 S5245 TONG 36” Screen Grader Choice mounted on Frames basically 50” discharge plus extension of 21”. Both Screens driven by single 3 phase motor. Possiblility of 25/30/35, 40& 50mm screens. Also similar machine with individually driven screens. Recently refurbished. Cross conveyers offered seperately to suit clients needs Good condition £1,400 each % Shaun 07850 978188 S7014 1991 GRIMME KSA 1500 Front Mounted Flail potato topper, C\w cross conveyer discharge belt and 2 depth wheels. Set for 2 - 34” Rows. Good condition £1,500 % Shaun 07850 978188 S7052 TONG 24” 2 Screen Inline Grader c\w cleated belt feed, 2 Screen graders with cross conveyers under, roller table with light over and separate variable speed.

3 phase, Various screens Very Good condition % Shaun 07850 978188 S7022 PEAL 900 Box Filler Twin Head, automated, 3 phase filler. Converted to fill 5 or 6ft wide boxes. Tidy for age. Optional Feed conveyer 1m wide by 1.4m long on adjustable legs (3ph) adds £500 Good condition £1,450 % Shaun 07850 978188 W3436 HERBERT Rubber belt elevators x2. One 4m overall length including adjustable swan neck. 2m max drop, 750mm wide, 3 phase. Other, 2.5m long, 1.5m drop, 650mm wide belt and single phase. Good condition % Chris W 01787 247286 S6728 2006 WELVENT 50 by 30 Ft Cold Store, prefabriacted into shed so would remove. Appx 8ft 6” High c\w 2 Outlet in store Cooler and Welvent refrigeration unit inc Digital cotrol panel etc. Store doors and barriers also available. Very Good condition £8,500 % Shaun 07850 978188 S7018 Elevating Conveyer Fitted 18” Continental web to clean as it elevates. Appx 10ft long. Fitted 3phase Varible speed drive Average condition £450 % Shaun 07850 978188 W3411 NICHOLSON SYSTEMS Rubber Coveyors 5m Picking-Off table with a 2.5m trash conveyor. 3ph variable speed & reversible motors. All mounted on a low trailer with full canopy. Good condition % Chris W 01787 247286 S7019 TONG Elevating Conveyer, 18” Cleated belt at 45 degrees (2” cleats) Discharge appx 55” High. Single phase variable speed Good condition £500 % Shaun 07850 978188 C6469 LOCKWOOD Potato Grader rotary screen type on raised fully adjustable metal legs, hedgehog rubber roller drive roller to 36” wide screen, flat belt dirt conveyor at 90 degrees under screen, 3 phase electric with 7 good screens of various sizes. Good condition £995 % Chris C 01926 338639 S6738 1997 TONG 425 Autoweigher Single 10” White food grade belt. Single phase on 13 amp plug with switch. 2 Bag clamps.

On Castor wheels Good condition £475 % Shaun 07850 978188 S5853 CUTTING Chitting trays Standard timber 18” by 30” Trays, stacked inside on pallets appx 48 per pallett. Sound for age.

Proabably 2 lorry loads. Also 4/5 Board Half ton boxes 50” by 42” by 36” tall average condition, around 100 @ £4.00 each Good condition £0.40 each % Shaun 07850 978188

31

POWER HARROWS

S7083 LELY 400 - 45 4M Roterra Harrows choice of 2 fiited large round haevy duty gearboxes. 450 packers, one not worn.

Sound well maintained machines with 70% Club tines. Good condition % Shaun 07850 978188

SILOS & STORAGE

C6591 BOYTHORPE Harvestore wet grain silo, 1982 model 4 rings high (55” high each ring, 7 rings circumference (each ring 106” long, single bolted). Can be professionaly dismantled if required Good condition £895 % Chris C 01926 338639 C6951 INDOOR Steel panelled round grain silo, capacity 20 ton made up from 24 galvanised corrugated sheets (4 sheets round), taken down & dry stored including Reco 20’ long straight galvanised auger 3.5” diameter, 3 phase electric motor with belt drive at delivery end Good condition £300 % Chris C 01926 338639 S6815 SIMPLEX Drying Bins 12 Inside open top perforated 9ft 6” Diameter drying silos. Each with Central Drying tubes and connections. Buyer to dimantle and remove Very Good condition Offers % Shaun 07850 978188 S7032 UTLETY INGHAM 10 Ton Centre Discharge galvanised Feed Silo on legs, discharges appx 3ft up with slide. Feed pipes and side door appx 20” square. Overall 19ft tall 8ft diameter.Ready to load Average condition £400 % Shaun 07850 978188 S7044 CRITTALL Corn Bins 10 - Square galvanised bins 10ft by 10ft, Inside, straight & tidy plus 2 smaller ones. Buyer to dismantle Good condition % Shaun 07850 978188 C6610 BRICE BAKER Outdoor Grain Silos with drying floors, nest of six 150 tonne capacity each 24’ diameter 7 ring high with perforated above floor drying system, double ring access doors. Paired fan ducting. All very sound galvanised silos located on large concrete pad with easy access. Dismantling on site by professional team with all equipment made ready for transport if required or sold as currently erected for own dismantling Good condition poa % Chris C 01926 338639

33

SPRAYERS

C6826 ALLMAN 625 Special mounted 12 metre sprayer, 600 litre plastic tank, manual fold steel boom across rear of machine, single plastic lines with single spray nozzles, manual controls for 3 section boom, self fill facility, good pto shaft drive to diaphragm pump, all good straight & tidy booms, requires new pressure gauge, been on farm from new Good condition £650 % Chris C 01926 338639 C6962 HARDI LHY Mega mounted 20m sprayer, 1000 litre 1995 model with induction hopper, in cab 4 section boom control, hydraulic fold booms with plastic lines & triple nozzles plus tilt ram. Complete with 800 litre round front tank on tractor front weight frame mounted framework, hyd driven transfer pump & pipework Good condition poa % Chris C 01926 338639 W3346 STOCKS Trailed Quad Bike Granular Applicator 12 x1meter Stocks Micro Meter applicators mounted on 12m folding boom on ATV trailed chassis. Applicator driven by Briggs and Stratton petrol engine.

This unit has had very little use. Excellent condition poa % Chris W 01787 247286 C6776 CLEANACRES Atlas self propelled sprayer, 4wd/4ws 1995/6 model with Perkins 170hp engine & full hydrostatic transmission, terra tyres size 48x25.00-20 with 35-40% good tread 8 stud fitting plus set 4 rowcrop wheels & tyres size 12.4R32, 2500 litre tank. Contractor specification 24m boom (joystick control) will also spray at 12, 18 & 20 metres, single nozzles on stainless lines, boom tilt ram, hyd driven 6 cylinder sprayer pump. RDS Landquip RS 8000 in cab spray controller with flow meter. Hydraulic axle suspension with oil tank at front of aircon cab. In full working order can have 12 months test if required Good condition poa % Chris C 01926 338639 C6898 ALLMAN 625 mounted 12 metre 625 litre sprayer, manual fold boom with winch height backframe, manual controls (3 section), single nozzles on plastic lines, good pto drive to 3 cylinder pump, hand lance & long hose fits to valve chest, quantity spares etc. Stored inside unused for a while but fully drained & antifreezed. Currently used as a 6m unit, boom extensions easily refitted. Good condition £550 % Chris C 01926 338639 C6947 ALLMAN Claxton mounted 8 metre sprayer, manual fold 3 section boom, manual controls on machine, 2 cylinder pto drive pump, kept dry stored suit grass land or smallholding/veg grower Good condition £475 % Chris C 01926 338639 C6651 GAMBETTI BARR 18 Metre linkage mounted sprayer, 1000litre main tank with 100 litre clean water tank on side, full hydraulic folding boom with tilt ram & 5 section in cab controls, single stainless lines & filters to each section, adjustable rubber bellows boom suspension, chemical induction hopper, good pto drive to pump, requires 3 spool valves to operate, new on farm in 1999, currently antifreeze stored.

Booms all straight but showing rust sections where powder coting paint missing.Used with 700 litre Lely front tank and hyd drive transfer pump, tank frame fits to tractor weight frame. Can be sold less front tank at £2995 Good condition poa % Chris C 01926 338639 C6581 EVRARD 1000 Litre mounted sprayer, 12 metre manual fold boom with 3 section in-cab electric controls fitted single nozzles, winch back frame for boom height control, Evrard pto driven pump, self fill facility, stored inside and antifreeze treated, was MOT tested when last used Good condition £825 % Chris C 01926 338639 C6893 KNIGHT

Trailed 2500 litre sprayer with 24m hydraulic folding booms (currently operating at 25m on veg crops), 1986 model can be made to track on 12.4R46 tyres, stainless lines with 5 nozzle heads, stainless induction hopper, self fill facility, 6 cylinder pto driven pump, Ramsey pressure maintain system, boom tilt ram & flip over second boom section allows machine to spray at 12m, Fan Jet spinning disc applicator fitted above sprayer tank Good condition £2,995 % Chris C 01926 338639

C6845 HARDI Mega LPY tractor linkage mounted 1200 litre sprayer, new on farm in 2001 fitted18 metre hydraulic folding boom with 4 section control for single plastic lines fitted triple nozzles, 6 cylinder pto driven diaphragm pump, boom tilt ram, 80 litre clean water rinse tank, induction hopper with latest style can wash nozzle, clothing locker, MoT tested to June 2014, fold up demount legs, road lights. Very tidy sprayer with one small boom repair Very Good condition £4,950 % Chris C 01926 338639 C6957 CLEANACRES

Model 185 mounted 12m hydraulic folding sprayer, tubular alloy booms fold as single section from backframe, boom tilt ram, hyd raise & lower, 3 section in cab control, induction hopper, Airtec system with single nozzles at 50cm spacing, 3 cylinder pto drive pump & gearbox to airtec system, self fill facility for 830 litre (185 gallon) plastic tank, Bout marker. Tidy straight sprayer for age with demount stands, requires 2 x da spool valves + 1 x sa supply Good condition £1,195 % Chris C 01926 338639 S7026 CLEANACRES Trailed 12m Sprayer with 1400 litre tank. Galvanised framework. Ramsay Air control system.

Single jets. AR 160 4 cylinder pump.

11.5/80 - 15.5 tyres. Average condition £800 % Shaun 07850 978188 S6118 1990 WILLMOT Litespray Selp propelled LGP Sprayer. Pommier 24m hydraulic folding booms. 1500 litre tank.

Hydraulic raise & Tilt. Single Stainless lines, quad jets. Induction bowl. 38 x 20 x 16 IHNS terra tyres. Ford 2.5D York engine.

4771 hours. Good condition £2,800 % Shaun 07850 978188 C6945 CLEANACRES

WWW.WRIGHTSREGISTER.COM

34

35

Atlas 2500 self propelled sprayer, 4wd/4ws 1998 model with hydro transmission & Perkins Phaser 6 cylinder 170hp engine, 8041 rec hours, aircon cab with joystick boom control & spray rate controller can be set to manual or auto, steel gullwing fold 24m boom can also operate at 12/18 & 20 metres on single stainless lines fitted low drift nozzles, 6 cylinder hyd drive rear mounted pump, stainless induction hopper, self fill facility, 2500 litre spray tank & clean water tank above, solenoid valves all recon March ‘13, hydraulic axle suspension with high clearance Poclain motor drives fitted very good 320/85R32 tyres on heavy duty adjustable rims. Requires one rear boom lift bush replacing, not used for 12 months but all in very straight & tidy order. Wide tyres & wheels available from similar machine if required Very Good condition £7,995 % Chris C 01926 338639 S6504 HARDI Everaad AMM 2000 Litre self propelled sprayer, fitted with Knight 24m steel booms, 120 HP Deutz engine.

Recent clutch and gearbox overhaul.

Harditronic control system. 9.5 - 28 fronts with 13.6 - 38 rears. Good condition £6,750 % Shaun 07850 978188 C6592 STAINLESS Steel 3000 litre square profile sprayer tank, currently with steel 20 metre hydraulic folding Chafer rear boom fitted & part of pivot steer self propelled unit ex Ford tractor. Tractor not for sale but tank easily made into bowser or unit can be made into trailed sprayer with tracking steering rams, includes Teejet controller, induction hopper, triple nozzles on plastic lines, pto driven diaphragm pump & Pecson fill pump, rear mounted pelleter unit & 8 stud row crop wheels). Requires drawbar extending with ring hitch & boom removing for bowser use. Please phone for photos & details Good condition £1,950 % Chris C 01926 338639 S6328 24m Demount unit Suit MB trac or similar. Hyd folding & raise / lower. 2000 litre GRP tank. Single stainless lines. In cab controls. Very Straight Good condition Offers % Shaun 07850 978188 C6551 HARDI LHY 800 mounted 18m sprayer, 800 litre tank with 6 cylinder pto driven pump, manual controls on machine with 4 section boom control, hydraulic folding gull wing type boom fitted plastic lines & triple nozzle holders (one spray nozzle only fitted). Also demount sprayer &24m boom ex Fastrac & a 1000 litre Hardi plastic tank Average condition Offers % Chris C 01926 338639 C6870 BERTHOUD Self Propelled sprayer, 4000 litre plastic demount tank on Thwaites Alldrive 4wd/4ws chassis, converted in 1993 with 24m hydraulic folding boom, Ford 6 cylinder power unit, Evrard sprayer pump gound speed related, centrifugal rear mounted hyd drive fast fill pump, 4 section boom control can spray at 12m, tilt ram, triple nozzles, Trelleborg 421 twin 600/65-26.5 tyres (all 50-60% good tread) on 8 stud axles plus 13.6-38 set narrow wheels. Forward control cab, manual gearbox. Currently uses centreline GPS control system. Drives but ready for a new transmission clutch & has leaking axle final drives. Will make good value machine when tidied up Average condition £4,995 % Chris C 01926 338639 S6026 LELY 400 Litre Front mounted tank, c\w hyd driven pump, electrically switched. Brackets to fit MF front weight frame. Good condition % Shaun 07850 978188 C3228 MALGAR 1100 Gallon (5000 litres) water bowser, mild steel painted blue, single axle with hyd brakes fitted 386/65-22.5 super single tyres, top fill access hatch & bottom rear 2” outlet, Honda 4hp petrol engine driving centrifugal pump for fast sprayer fill. Rear ATV quad bike carry rack with loading ramps, side box rack & lockable steel cabinet, new 1997 - farm use only in very clean order Very Good condition £2,550 % Chris C 01926 338639 S7119 HARDI STR 1500 Trailed 1500 litre sprayer c\w manual folding single line booms with single jets. 6 cylinder pump.

10/85 - 15.3 tyres. Average condition £500 % Shaun 07850 978188

SUBSOILERS

C6474 COUSINS Subsoiler 2 leg heavy duty model with 8”x4” box frame 3.5m wide, rear large diameter flat bar steel crumbler barrel 3.25m wide on screw depth adjusters, steel 8” wide 24” dia depth wheels fit to front of frame. Adjustable legs with good feet (no wings) & front shins, one very good the other part worn Good condition £1,395 % Chris C 01926 338639 S6955 RANSOMES C 90 Toolbar fitted 3 Simba Pro lift legs on Swivels with good shins, points and wings, plus Hydraulically controlled solid tyred packer. Tidy paintwork Good condition £900 % Shaun 07850 978188 C5965 HAYLOCK 5 Leg mounted subsoiler, heavy duty linkage mounted 4m wide frame non folding, winged feet & front shins to legs with 2’3” clearance, all mounted in box section frame size 4” x 7”, rear flat bar crumbler roller 3.7m wide on pin & hole depth adjustment, 2 legs good & 3 getting thin at rear, needs big tractor to operate Average condition poa % Chris C 01926 338639 S6877 SIMBA Flowking 3m subsoiler with 5 legs, Fitted packer with good scrapers.

Average paintwork Good condition £3,500 % Shaun 07850 978188 S7027 COUSINS Vee Form 3.25m Subsoiler c\w 5 adjustable legs, Flat bar crumbler and 2 steel wheels. Good condition £3,500 % Shaun 07850 978188 C6832 COUSINS ‘V’ Form heavy duty 5 leg mounted subsoiler, 2.25m wide with 8” x 4” box frame, winged feet on all good legs, rear flat bar crumbler roller on new screw adjuster control arms, 2’ diameter steel depth wheels fitted on front frame with all good screw adjusters Very Good condition £2,800 % Chris C 01926 338639 S6764 FLATLIFT 5 leg Subsoiler 2 Bar frame with 5 swivel legs, 2 large steel wheels and flat bar type 4m packer at back. Act Frame 3.8m. Solid Tool Good condition £2,300 % Shaun 07850 978188 C6600 BOMFORD Twin Leg subsoiler, linkage mounted 8’ wide Superflow frame with pair legs fitted front shins & points, ideal for going down tramlines & compacted headlands Average condition £365 % Chris C 01926 338639

TANKS

C6959 DIESEL Bowser single axle towed by tractor, 500 gallon capacity round steel painted tank on chassis with twin screw jacks, top fill & 12 volt electric pump with hose & gun Good condition £425 % Chris C 01926 338639 S6826 1987 ACRITE PIPEWORK LPG Tank 1 ton (1700 litre) Skid mounted LPG tank C\w George Meller single phase pump and baynet nozzle and pipe with shelter. Good condition £900 % Shaun 07850 978188 C6784 FUEL TANK Steel square type 1000 gallon capacity size 8’ x 5’ x 4’ with outlet hose & gun attached to lockable gate valve. Single skin non bunded used for one fill of white diesel only, some light surface rust on top panel requires paint recoating.

Complete with strong steel stand 5’ high.

Ideal second tank or for grain drier etc.

Very Good condition £455 % Chris C 01926 338639 S6727 Bunded Steel Fuel Bunker tank c\w own diesel pump. Actual storage tank 8 by 4 by 5 feet. Good condition % Shaun 07850 978188 C6943 WATER BOWSER made by Merrick Loggin, 1000 gallon capacity mild steel square sided construction, single 8 stud axle fitted 16.5R22.5 tyres & hyd brakes, ring hitch & shoe, side carrier boxes, top fill with front & rear discharge, road lights. Requires repair to base of tank Average condition £875 % Chris C 01926 338639 S6992 MEULLER 4000 Litre Stainless Steel Bulk milk tank. Cylindrical like road tanker on short legs. Not insulated Very Good condition £2,500 % Shaun 07850 978188 S6172 SCHNEIDER INDUSTRIES 1400 Litre LPG Tank , mounted on frame c\w single phase Smiths Electric pump with bayonet gun & pipe. Proper Rig Good condition £1,250 % Shaun 07850 978188 C6308 DIESEL Bowser trailed unit with 400 litre plastic tank, recent high capacity electric pump to filter & hose fitted filling nozzle with auto cutout. Front carrier box for cans etc. Long drawbar with ball hitch, wide single axle fitted 145R10 tyres, lighting board. Pump has long cable & crocodile clips for use with 12v battery. Suit towing with Quad bike or pickup etc. Tank is not bunded. Good condition £425 % Chris C 01926 338639 S6795 CHAFER 2000 Litre Trailed single axle spray bowser. 7.50 - 16 tyres, road lights, PTO driven Comma filler pump, Usefull Chemical store box on the back.

Good condition % Shaun 07850 978188 C6673 BUNDED Fuel Tanks pair lockable steel cabinets both free standing with lifting eyes fitted internal plastic diesel tanks.

Western Trailers model in green paintwork capacity approx 500 gallons with no pump but internal platform for electric pump mounting, external size 8’6” x 4’9” x 4’6” high. Fuel Safe 500 model (500 gallon capacity) in yellow paintwork with hand pump, hose & nozzle, external size 8’ x 4’6” x 5’6” wide. Price each Good condition £850 % Chris C 01926 338639

36

TRACTORS & EQUIPMENT

S6746 FORDSON Dexta 2wd tractor, 3 cylinder engine starts and runs well. Roll bar and draw bar (no lower Linkage fitted).

6-16 Landrover fronts 50%, 12.4,11-36 rears 5%. PTO. & cover. Good condition % Shaun 07850 978188 S7129 1995 CASE INTERNATIONAL 5130 Powershift Plus 4 wd tractor c\w Front linkage, 3 spools and pick up hitch. 520/70 R38 rears 70% good and 480/20 R24 fronts 50%. LHR. Reasonable cab Average condition £7,000 % Shaun 07850 978188 S7113 1998 EASTERBY

ET 8 Monocoque 8 ton trailer c\w Hydraulic back door, Tandem axle on 12.5/80 - 15.3 tyres with hydraulic brakes. Very Good condition % Shaun 07850 978188

C6804 JCB Fastrac 2150 Turbo 4wd high speed tractor, 2001 model with Smoothshift gearbox, 148 horsepower Perkins 1000 series engine 6560 recorded hours, 50kph road speed, 2 wheel steer, 520/70R30 tyres on 10 stud wheels all approx 5% to 20% good tread, front & rear fenders, 2 seat aircon cab (needs attention), pick-up hitch, front weight frame, cab roof work lights, load carrying rear chassis, ABS & air brakes, recent new battery, good working machine in straight order with bright yellow paintwork Good condition £18,495 % Chris C 01926 338639 C6894 HEVA Front Weight carrier frame to fit front linkage, c/w bolted in cast frame bolster fitted 10 x 45kg McCormick tractor weights on 6” deep frame lip, back frame hole matrix allows alternative manufacturers weight carriers to be fitted, fully adaptable with de-mount stands, all in very good red paintwork. Also CLAAS 600kg cast front weight block to fit 3 point linkage, compact profiled design in shiny enamelled grey livery part number 081018118, front tow pin hole, suitable to have bracket fitted to double up second weight - this one priced at £825 Very Good condition £1,095 % Chris C 01926 338639 C6953 MASSEY FERGUSON 3645 4wd 91hp Tractor, ‘56 registration with 2450 rec hours on Sisu engine, 24 speed gearbox & power shuttle, 12.4R36 &11.2R24 tyres with front fenders, 3 spool valves, pick-up hitch, aircon cab. Fitted MF (Quicke) 925 parallel lift front loader. Good straight tractor with loader fitted later than when tractor new. Good condition poa % Chris C 01926 338639 S7093 CLAAS Xerion 3800 Trac VC Reverse Drive 380 HP 4wd tractor with 50K Vario transmission. Air Brakes Front and rear linkage. 4 spools to both. Trelleborg 65/85 R38 tyres almost unmarked. Full Digital climate control. Only 1731 hours Excellent condition £100,000 % Shaun 07850 978188 S6092 2006 NEW HOLLAND TC 27 4wd Diesel Compact tractor on Good Turf Tyres ,Appx 2000 hours. Comes with full road lighting. Front weights, wafer or Jerry can, 2 Spools & Folding Rollbar. Very capable worker for its size, suit scraping, mowing or just for the kids.

Very Good condition £5,250 % Shaun 07850 978188 S6793 1991 FORD 4000 Industrial 2 wd tractor c\w Heavy duty front axle, new seat, Sound mudguards, no cab 5700 hours. 50 % 480/70 R28 Rears. 50% 10.75 - 15.3 rears. Drawbar only (optional extra back end). Good condition £1,700 % Shaun 07850 978188 C6880 FORD 4100 Tractor with ‘Q’ bubble cab, 2wd 1977 model with ‘X’ block 3 cylinder 52hp engine, power steering, 8 speed gearbox, pick-up hitch, spool valve, front weight frame, 13.6R36 rear tyres 90% good tread & all good 6.00-19 fronts, all very straight panelled with good grille & lights plus full cab glass, low houred tractor (clock shows 619 hours but replacement).

Rare high spec model very collectable working tractor Very Good condition £5,795 % Chris C 01926 338639 S6714 INTERNATIONAL 275 Hi Clear 2 wd tractor, 12 - 38 rears 60%. Restored in recent years back and used for light grassland work. Genuine sound tractor with excellent engine and lighting kit. Very Good condition £3,500 % Shaun 07850 978188 W3523 1983 ZETOR

8145 80hp 4wd complete with Grays Lynkon 430 quick-fit loader. As new Alliance 480/70R38 rears and Continental 360/70R24 fronts. Pick-up hitch, 2 spool valves. Duncan Cab, glass intact, all electricals working, cab interior good and new seat cushions. Front weights, pallet tine and dirt bucket available. In very good original condition. 1790 recorded hours (not total!). Only 3 owners since 1987 when registered. Previously Zetor’s own tractor. Serial no. 1000003. poa % Chris W 01787 247286 C6692 TEAGLE Quick Hitch ‘A’ frame, tractor linkage mounted ‘male’ part with Cat 1 & 2 fittings, top catch with rope operated release lever, painted yellow had little use.

Can be used on numerous implements such as yard scrapers, bale shredders etc.

Very Good condition £220 % Chris C 01926 338639 S7122 FLEXICOIL Front Linkage With single ram to fit Case MXU tractor. Simple type made for Flexicoil front press see Item S7123 available with this. Very Good condition £600 % Shaun 07850 978188 S7130 CASE CVX 160 4wd Tractor with front Linkage & PTO, Fully vario 50K transmission with air & Hydraulic brakes. 600/65 R38 rears 90% Good 540/65 R26 fronts.

4 spools, Pick up hitch. Cab & front axle suspension, Air conditioning, Air seat, electric Mirrors. Good condition £27,000 % Shaun 07850 978188 C6935 MASSEY FERGUSON

W3534 1982 MERCEDES

MB1000 Standard tractor, 7010 recorded hours, 3 spools, pick-up hitch, trailer brakes, air brales, 16 speed 40kph transmission, passenger seat. 16.9R26 Michelin Bib-X, 50% tread. Tinwork and paint mostly good. Starts on the button.

On small arable farm £7,500 % Chris W 01787 247286 S7090 2013 JOHN DEERE 5055E 4wd Tractor with ROPS only for indoor low building work. Only 440 hours. 380/85 Rears 80%, 320/85 R20 fronts with fenders.1spool Linkage & drawbar. Mechanical gearbox. Very Good condition % Shaun 07850 978188 S7091 MF 30E 2 Whhel drive industrial 135 tractor with power shuttle gearbox and sound powe loader with 4ft bucket. 70% 14.9 - 28 rears & 60 % 7 - 16 fronts. Sound cab lacks door. Good condition % Shaun 07850 978188 C6869 ZETOR 8411 Proxima 4wd tractor, 85hp 2007 model fitted Quicke Q40 power loader, 2700 rec hours, aircon cab with passenger seat, 40kph 12 speed gearbox with manual shuttle, pick-up hitch & single spool valve, ballasted 420/85R34 rear tyres 60% good tread, 340/85R24 front tyres 75-80% good, front fenders, 4 wheel braking. Joystick loader control lever, soft ride system, Euro fittings front back plate with elec control hydraulic service, manual disconnect system with stands. Very tidy unmarked loader tractor genuine reason for sale Very Good condition £17,500 % Chris C 01926 338639 C6681 STANDEN Front Linkage simple type fits to front of tractor to operate Standen Hoe, single ram lift, yellow paintwork, last used on Case tractor, could be adapted for other applications like a snow plough Good condition Offers % Chris C 01926 338639 S7132 FORDSON Dexta 2wd Tractor repainted with new mudguards fitted. Pick up hich & linkage. 11- 28 tyres 50%. Good starter & Runner. Good condition £1,600 % Shaun 07850 978188 S6995 FORD Bonnet RH side main section for 7810 Silver Jubilee Edition.Not perfect but quite usable with a little TLC. Good condition % Shaun 07850 978188 W3536 1958 MASSEY FERGUSON

35 4 cyl diesel. Clock replaced, now showing 1020hrs.T-bar hitch, good tinwork.

Starts well, good oil pressure. Straight little Massey for work or play. poa % Chris W 01787 247286 S7111 MF 250 2wd Tractor, Sankey cab, Power steering. Pick up hitch & Tip pipe.

12.4 - 32 rears 50%. Straight little one owner tractor Good condition £3,500 % Shaun 07850 978188 S7112 1994 MF 398 Hiline + 4wd Tractor with 18 speedshift gearbox. 4 front weights, 2 spools, Pick up hitch 5300 hours. 16.9 34 & 13.6 - 24 fronts all original. 5300 hours on one farm. Clean inside & out Very Good condition % Shaun 07850 978188 S5770 1994 CASE INTERNATIONAL 5140 Maxxum 4 wd Tractor, Pick up hitch, 2 spools, recent dealer back end ovderhaul inc handbrake. 8500 hours. 460/85 R38 20% 16.9 - 24 fronts. Tidy Good condition £9,500 % Shaun 07850 978188 C6821 JCB Fastrac 2135 Autoshift 4wd/2ws tractor, year 2000 model, 7239 hours (69885kms) on Perkins turbo 135hp engine, second farm from new and in very nice clean condition with Trelleborg front tyres 90%+ good & Firestone 60%+ good rears fitted to 5 stud axles, front & rear fenders, pick-up hitch, 3 rear spool valves with front service, all clean cab with working aircon and all glazing intact, 50kph Autoshift gearbox 4 speed shift, full suspension & air brakes, Bosch electronic 3 point linkage controls. All paintwork in bright condition on fully working tractor Very Good condition poa % Chris C 01926 338639 C6744 MASSEY FERGUSON 698 tractor & MF 85 power loader, 2wd 88hp tractor 1983 model with 12 speed 3 lever gearbox, hours showing 5676 but not working (approx 7000), rear 16.9R38 Dunlop tyres 75 &60% good tread 11.5/80-15.3 wide front tyres, 2 spool valves, telescopic type pick-up hitch with drawbar, hook type lower links with twin assist rams, cab sound but some rust areas at rear & on doors. Loader has front 3rd hyd service, double acting lift rams, demount stand & manure fork with tines for bale handling only Average condition poa % Chris C 01926 338639 S6858 MF Weight Set 10 Front end weights suit MF 2000 series tractor with lower retention bolt. Good condition £350 % Shaun 07850 978188

37

390 4wd tractor, 1991 model with 5312 rec hours & Duncan Q cab, 8 speed gearbox plus reverse shuttle lever adjacent to steering wheel, telescopic pick-up hitch, 2 spool valves, 16.9R30 rear tyres 90% good tread, front 11.2R24 80% good tread. All very straight panelwork & good main paint Good condition £9,275 % Chris C 01926 338639 S7110 2004 MF 5445 2wd 90 HP tractor with 16 speed shuttle box. Only 1784 hours.

420/85 R34 rears 70% 10 -16 fronts 60% Nice clean small farm tractor Very Good condition % Shaun 07850 978188 S7118 MF 135 2 Wd tractor fitted MF trip loader and muck fork. 14.9 - 28 rears and good 7.50 - 18 fronts. MF Flexicab on RPOS frame. Very straight for loader tractor Good condition % Shaun 07850 978188

APRIL 2014 39

• See also the wanted section and read the buying/selling details before calling

WWW.WRIGHTSREGISTER.COM

TRAILERS

S7023 WEEKS Hi Tip 4 Ton Steel Dropside trailer on good 5 stud wheels with10 15.3 tyres. 10 ft 10” long body by 6ft 3” with 18” plus 18” sides. Also Standard 4 Ton Monocoque bodied steel trailer with 10ft by 80” by 43” body. Good condition % Shaun 07850 978188 C6743 BATESON Cattle Trailer model 48L, 12 ft long with good rear ramp & timber loading gates, white roof type new in 1990 but had little use, all good hitch & plastic mudguards, Avonride rubber suspension on twin axles (rides quieter than an Ifor Williams) fitted all good tyres with spare (3 tyres new) size 6.00-16, hardwood floor under steel chequer plate top, 5’6” wide & 5’10” high internal. Unused recently so may need a service but very straigh trailer. Cattle specification so no decks or divider gate. Very Good condition poa % Chris C 01926 338639 S7115 GRIFFITHS DS 80 Dropside steel tamdem sprung axle trailer on good Vredestein 11.5/80 - 15.5 tyres. Brakes, lights & grain chute. Good condition % Shaun 07850 978188

S7131 TRIFFITT 10/11 Monocoque C\w Sprung drawbar and Hydraulic Back door with grain chute. Tandem sprung axles with good 345/65 R18 tyres. Body 17 ft by 7ft 3” by 4ft. 1 Small farmer owner who has kept the trailer inside. Very Good condition £4,750 % Shaun 07850 978188 S6868 CHALLENGER Plant trailer Tanden Axle Galvanised with Fixed 12” sides & Mesh type ramp rear door. 175 - 13 tyres on the sides Good condition £1,500 % Shaun 07850 978188 C6683 IFOR WILLIAMS P7e trailer suitable for carrying a Quad bike etc., single axle fitted 20.5x8.0-10 wide tyres with mudguards, avonride type rubber suspension, all galvanised steel construction with 7’2” long by 4’ wide body & 12” high fixed sides, long chequer plate loading ramp/rear door, phenolic coated timber floor, roping hooks, ball hitch, road lights, spare wheel, 750kg gross capacity does not require overun brakes. Price is plus VAT Very Good condition £595 % Chris C 01926 338639 S7050 IFOR WILLIAMS GD 85 General Duty Trailer, Tandem axle, 165 R13 wheels to the side, with part mesh rear ramp door. Spare wheel unused. 2700kgs MGW. Galvanised body 2.5m by 1.58m Very Good condition £1,250 % Shaun 07850 978188 S6918 PETTIT 6 Ton Single axle Double dropside trailer on Good 12.5/80 -15.3 tyres. Ply lined body (To rape proof)13ft by 6ft 6” by 3ft 6”. Nice paintwork Brakes & Lights Very Good condition £1,800 % Shaun 07850 978188 S7001 IFOR WILLIAMS DP120G 12FT Flat trailer with galvanised alloy covered floor and Detacheable Alloy Livestock body c\w sheep decks, partition & gates. Woukd sell Livestock body separately. Very Good condition £2,000 % Shaun 07850 978188 C6773 BIG K Monocoque 12 tonne twin axle tipping trailer size 18’ long x 8’ wide x 4’ high sides, leaf spring suspension, super single 385 size tyres on 8 stud fitting, hydraulic brakes, manual tailgate with grain chute, ring hitch & drawbar shoe, front ladder, road lights, very strong & straight trailer painted green of a generous size.

Ideal grain & muck trailer Good condition £3,995 % Chris C 01926 338639 S7124 AS

10 Ton Monocoque Tandem Sprung axle trailer in blue with red easy sheet.Front Ladder and Standard rear door with grain chute, Brakes & lights. Original 12.5/80 15.3 tyres with 60% tread. Very Good condition £5,250 % Shaun 07850 978188 S5982 2000 KING Skeleton Trailer 28FT long, tandem axle, Air suspension, Air brakes, twin 215/75 R17.5 tyres. 16 Ton Gross carry appx 13 ton. Make very good bale trailer or low loader Very Good condition £1,400 % Shaun 07850 978188 C6862 BALE Trailer 4 wheel drawbar turntable type 22’9” long & 7’2” wide, twin wheels on front axle 6.50-16 & twin rears fitted 8.5-17.5 tyres, front & rear short steel hay ladders, low loading height, no suspension, floor ready for re boarding Average condition £495 % Chris C 01926 338639 S7105 PETTIT High Tip 8 Ton Tanden Axle trailer (s) with Doulble galvanised steel dropsides 13ft by 6’6” taper appx 3ft 6” tall.

Steel floor. 12 by 18 tyres Average condition % Shaun 07850 978188 S5942 WESTFIELD 20 Ton 30 Cubic Meter capacity hi-speed tipping trailer, Built On Refurbished Skelly trailer on Tandem Sprung axles, Refurbed Hyd brakes, 385/65R 22.5 Tyres on 10 stud rims. Monocoque tipping body, reinforced 10mm floor and tapered sides, 4mm to the top, built and painted in epoxy, underfloor multi stage ram cylinder, Tips to 52°. Slide tilt Hydraulic full tailgate door. Sprung drawbar on phosphor bronze bushed pin. New lights wiring and hoses, Road lighting. Excellent condition £15,600 % Shaun 07850 978188 S6749 SHOOT Bus Converted Single axle lorry body converted into shoot bus / trailer

by Fittting side centre door seats for 20 plus tables and overhead racking. Roller and drop down door at the back. Lights No brakes. (Pull with tractor) Good condition £2,250 % Shaun 07850 978188 C6857 HENTON 10 Tonne Mono twin axle trailer, repainted blue & recent new brake shoes, hydraulic back door with large grain chute fitted wind up gate, body size 4.8m long 1.2m high & tapered body 2m to 2.3m wide, leaf springs, good Michelin XP27 335/65R18 tyres on 6 stud axles, front ladder, good ring hitch & drawbar shoe, road lights Good condition £3,295 % Chris C 01926 338639 C6774 BIG K 4 Wheel Drawbar turntable type 11 tonne tipping trailer, bolted dropsides & manual tailgate, size 18’ long, 7’ wide with 3’6” high sides, front axle fitted15.0/70-18 tyres, rear axle 385 size super singles both 6 stud fitting, hydraulic brakes, road lights, painted blue, tapered potato back section if required, sides have some rust areas so may need refurb but currently grain tight. Useful trailer to use as bulk or flatbed - rear extension could easily be fitted for bale transport. Similar 12 tonne version 22’ long with slightly lower sides (part side has 2’ removable section) again can be used as bulk or flatbed - this model priced at £3000 Good condition £3,395 % Chris C 01926 338639 S7106 PETTIT 3 Ton Timber dropside trailer. Single or double timber sides Timber floor . Body 10ft by 6 ft. 7.50 - 16 tyres on 5 stud axles.Choice in mixed condition. Average condition % Shaun 07850 978188 S7107 Shoot Cart Single axle Beaters trailer on Super single tyres. Bench seats round the outside. Rear Door and step to access. Extended tractor drawbar with box over. Average condition % Shaun 07850 978188 S6527 JONES 25ft Bale / plant Trailer 8ft wide tandem tilting trailer for plant or bales up to 10 ton. 11.5 / 80 - 15.3 tyres.

Very clever multiprurpose trailer Very Good condition £5,000 % Shaun 07850 978188 S6847 1996 RICHARD WESTERN 12 ton Tandem Axle Monocoque trailer, Sprung 8 stud axles with very good 386/65 R22.5 tyres. Standard back door with grain chute.

Blue paintwork and front ladder. Very Straight Very Good condition £7,000 % Shaun 07850 978188

C6936 BRIAN LEGG

8 tonne monocoque single axle trailer, 1983 model with 445/65R19.5 all good Michelin tyres on 8 stud fixing, body size 13’ long x 7’6” x 4’2”, single hydraulic tipping ram, ring hitch, hyd brakes, full steel manual tailgate with grain chute plus additional mesh tailgate suitable light material, strongly made trailer with all good green paintwork & fitted sheet, road lights Very Good condition £1,995 % Chris C 01926 338639 C6942 SILAGE SIDES to fit AS ACE 12 tonne mono trailer, blue painted front or side load system, self opening rear mesh tailgate, size 19’ long 7’/7’6” wide (fit tapered trailer) & 3’6” high plus 1’ extension, top lifting eyes for easy attachment Good condition £995 % Chris C 01926 338639 S7114 TYE 3 Ton Single axle timber dropside trailer on 7.50 -16 tyres, 5 stud axles.

Quite solid for age Good condition % Shaun 07850 978188 C6888 BATESON 45HB Cattle Trailer, 10’ long with chequer plate floor & recent new ramp timber top, 1991 model with all good 6.00-16 tyres on twin axles outside body, top ramp bar, timber loading gates, inspection door, 50mm ball hitch & overun brakes, lights, some small damage to roof front corner & one rubber mudguard. NO sheep decks -cattle spec only. Average condition £975 % Chris C 01926 338639 C6867 IFOR WILLIAMS Pony/Livestock trailer, blue painted type with side ventilators, twin axle 8’ long & 4’ 8” wide, 5’6” internal height, all good timber floor & loading gates, leaf spring suspension, ball hitch, jockey wheel & inspection door, 5.6013 tyres, all very sound tidy little trailer with no decks Good condition £685 % Chris C 01926 338639 C6789 SPECIALIST Box type trailers Engineer made with rear loading ramps & unused. Single axle model 2.5m long, 1.6m wide & 2m high, ball hitch & brakes, 17513 tyres + spare, painted cream & gold, stabiliser legs, jockey wheel, mudguards, Avonride suspension, twin side doors open up as loading ramps. Suit ATV transport or Mobility equipment in fully enclosed environment. Similar twin axle model without side ramps, streamlined curved frontage, front locker box over drawbar fitted Robin EY20 petrol engined single phase electric generator built on Snipe chassis, twin spare wheels.- this model priced at £1350.

Both all very strongly built, please call for more info & photos Very Good condition £995 % Chris C 01926 338639 S6027 ARMSTRONG AND HOLMES Flat 21 Ft Trailer, tandem axles 6stud walking beam with 10.5 - 18 michelin Pilote tyres.

Fitted lift off Potato Bulker bodie with narrow bottom belt unloader, 3 phase motor driven. Ply over steel frame with boards, Or Just the Flat trailer Good condition £3,500 % Shaun 07850 978188 S6154 Box Type Trailer Single Axle Lorry convertion interanlly 2.4m By 5m by 1.9m High. Roller door on back, sliding doors along sides. Hydraulic brakes on single sprung axle with 10 - 20 twins. Handy for seed, shoot or storage. Very Good condition £700 % Shaun 07850 978188 C5417 KING Hiab type Crane mounted on all steel strong subframe last used to fit into rear of grain trailer chassis (used on mono 10 tonne), easily mounts/dismounts, hydraulic stabiliser legs, spool valve controls to one side, push out last section with hook lifts 1/2 tonne plus at full stretch, long hoses to connect to tractor hydraulics, swivels approx 300 degrees, easily adapts to fit other operations Good condition £1,295 % Chris C 01926 338639

38

WHEELS/ TYRES DUAL/ROWCROP

S7095 GOODYEAR 66 - 43 - 25 Terra 2 pairs of 50% tyres on 8 stud rims with adaptor plates, 6 Ply. Also 1 pair of alliance 328 600/55 R 26.5 Fronts 80% on 10 stud 330PCD, 280 hole rims, and 1 pair of 500/60 26.5 8 stud 330 PCD 290 hole (60%) Good condition % Shaun 07850 978188 S6647 BETTINSON 12 - 38 Duals fitted 13.6 - 38 Tyres, 2 sets one with 60% Goodyears, the other with imports. Good condition % Shaun 07850 978188 C6928 DUNLOP 28L-26 pair tyres with all good deep tread fitted to wheels with 8 stud 8” (205mm) pcd & 6” centre hole fitting.

Chevron traditional traction lug pattern.

Last used on JD2650 tractor but will fit other models (replace 16.9R38) Good condition £895 % Chris C 01926 338639 S6609 STOCKS 15 - 38 Steel Dual wheel rims and spacers (No tyres) Good condition % Shaun 07850 978188 C6534 KLEBER Radial pair 480/65R28 tyres on wheels ex Sanderson forklift, radial tyres with good 10% tread, white painted 8 stud wheels with 8” pcd & 5.5” centre hole (large chamfered hole fit Ford tractor etc), welded centres non adjustable wheels Good condition £475 % Chris C 01926 338639 C6756 JOHN DEERE pair yellow painted complete wheels ex 2850 tractor size 1238 suit tyre size 13.6-38 with 8 stud 8” pcd fitting (no tyres fitted) Very Good condition £225 % Chris C 01926 338639 S6744 2007 STOCKS 380 /90 R46 Heavy Duty Rocrop wheel with Solid Centres 8 Stud 275mm PCD 220 Hole fitted Goodyear tyres 80%. Plus 385/85 R30 Fronts solid centre, 10 stud 335 PCD 280 hole. 70% Goodyear tyres. Very Good condition £2,800 % Shaun 07850 978188 C6912 GOODYEAR 48x25.00-20 Terra tyres on wheels ex Bateman sprayer, quantity 6 all 6ply rating, 3 have wheel fitting 8 stud 275mm pocd & 220mm centre hole, other 3 are 6stud 205mm pcd & 160mm centre hole, tread varies with some uneven wear. Also pair Michelin 9.5R48 row crop tyres on 6 stud Ford fitting, tread 50% good, last used on $600 tractor Good condition poa % Chris C 01926 338639 C6900 ALLIANCE Flotation 321 pair 600/50-26.5 all very good tread tubeless 12 ply tyres & 10 stud wheels to fit front axle of a 4wd tractor (JD6820 etc.). 10 stud fitting with 13” (330mm) pcd & 11” (280mm) centre hole diameter, yellow painted rims with widest offset measuring 14”. Inside of tyres grooved from fender stay bolts on full lock but have been used on farm for a few years like this Good condition £725 % Chris C 01926 338639

S5187 GKN 11.2 R48 Rocrops, Alliance Tyres with JD 8 Stud HD centres plus Fronts 11.2 R32 Alliance, same PCD Fit JD 6400 - 6620. Good condition £1,200 % Shaun 07850 978188 S6019 MICHELIN 9.5 - 48 Rocrop tyres, 6 ply on HDR type rims with pans, 280mm hole 8 stud 250mm hole. Also Pair of Kleber 9.5 - 48 rocrops60% tread on HD rims with Pans 8 stud 8” 5.5” hole Ford Etc. Average condition % Shaun 07850 978188 C5824 ALLIANCE Pair 600/60R30.5 flotation tyres 331 tread pattern traction type A8 12 ply with good tread, some small surface cuts but all sound carcass, rolling circumference when new 4340mm Good condition £450 % Chris C 01926 338639 S6926 9.4 - 44 Rocrops C\w 8 Stus Centres plus pair of 9.5 - 32 fronts with 70% tyres. 220 Hole, 275mm PCD Good condition % Shaun 07850 978188 C6895 BIG RUSSIAN Pair tyres size 28.126 with all good tread on wheels with bolt in swop centres, centre plate size 8 stud 8” pcd & 6” centre hole, painted yellow last used on JD 3000 series tractor but will fit other makes. Have lived outside but all sound done little work Good condition £825 % Chris C 01926 338639 C6133 GOODYEAR Wrangler 31.0015.50-15LT tyres ex Wilmot Lightfoot ‘buggy’ sprayer on 4 stud wheels (for Ford axles), multiple chevron type good tread, quantity 4 to be sold as one lot Good condition £365 % Chris C 01926 338639 C6557 TERRA TYRES Avon Tredlite size31x15.50-15, pair fitted to 6 stud wheels with 8” pcd, chevron pattern all good tread, available with pair of stub axles to suit plus drawbar from small trailed drill (fit other machines). Also pair same size tyres with grass type block tread, Bridgestone Pillow DIA-1 pattern fitted to 8 stud wheels ex front axle of JD 2wd tractor, 200mm pcd fitting with 150mm centre hole, very good tyres done little work Very Good condition poa % Chris C 01926 338639 C6722 SET 4 Wheels & Tyres ex self propelled sprayer with 8 stud 275mm pcd fitting, tyre size 600/65R28 tubeless - pair Goodyear with 20% tread & pair Michelin XM with approx 10% all sound, white painted rims with 300mm outer & 200mm inner offsets. Also set of four 48x25.00-20 6ply tyres on wheels with same fitting (8 stud 275mm pcd) &350mm offset - consisting of pair Firestone Flotation 23 & pair Goodyear Terratire all 25-30% good tread on white painted rims Good condition poa % Chris C 01926 338639 S6571 MB TRAC wheels Chioice of 16.9 24 Tyres 7 MB trac rims and deatcheable centres Various amounts if tread Good condition % Shaun 07850 978188 C6808 FLOTATION Pair rear tractor tyres size 66x43.00-25, Firestone 23 tubeless pattern on rims with twin flanges for bolted in swop plates (suit tractors or combines), 60% + good tread on both tyres, 2 sets of centre plates - 8 stud 8”pcd with a 6” centre hole (JD/MF/Case etc. fitting) & 8 stud 205mm pcd with 140mm centre hole Very Good condition £1,125 % Chris C 01926 338639 C6095 ROWCROP Wheels pair 8.3-44 fitted Michelin Bibagrip 3 tyres 50-60% good tyres, 8 stud fitting 275mm pcd with 220mm hole diameter, last used on Case tractor Good condition £295 % Chris C 01926 338639 C6755 PIRELLI 16.9R34 (420/85R34) TM600 pair tyres - as new with markings still visible on tread bars, fitted on heavy duty dual wheels with 4 clamps per wheel, round bar clamping rail. Quality radial tyres as new hard to find set, ideal as just a pair of tyres at this price Very Good condition £895 % Chris C 01926 338639 S5866 11.2 - R48 Rocrops with 70% Bibagrip tyres, 8 stud centres Ex Case Maxxum, plus 9.5 - 32 fronts 8 Stud adjustable centres. Both 220 hole 275 pcd Good condition £1,600 % Shaun 07850 978188 C6955 STOCKS Set dual wheels for 4wd tractor, steel rims only (no tyres fitted) with full set clamps, black painted type to take 18.4-38 & 14.9-28 tyres sizes, will need some de-rusting & paintwork Average condition £400 % Chris C 01926 338639 C6713 SET ROW CROPS Rear 9.4R48 (230/95R48) Alliance very good tyres on wheels with 8 stud fitting & 8” pcd, Fronts 9.5R32 Kleber tyres 30% good tread on 8 stud fitting with 325mm pcd, last fitted on Case MXU 4wd tractor. Fronts will also fit New Holland/Ford Carraro axle & rears also fit MF/JD/DB/Leyland etc. Also pair Goodyear crossply tyres size 18.4-30 ex trailed sprayer on 8 stud wheels with 275mm pcd - this pair price £345 Good condition £995 % Chris C 01926 338639 C6586 TERRA TYRES Pair 48x25.0020NHS Goodyears on 8 stud wheels with 275mm pcd, good tread but some slight surface cracking (last used on an MB Trac 1000).This size will also fit other applications (tractors, sprayers etc.). Also set four Continental 9.5-42 row crop tyres (3 x 85% good tread & 1 x 20%) all on welded centre to rim wheels same fitting as above (suit 72” track setting), 10 ply tube type. Set 4 priced at £1195 Good condition £600 % Chris C 01926 338639 S6326 TAURUS 270/95 R48 4 Star Rocrops On HD rims and centres to Fit MB trac (8 stud, 275mm PCD & 220 hole) Tyres all 85% good Set of 4 Very Good condition £1,300 % Shaun 07850 978188 W3451 COLCHESTER TILLAGE 8.3/80R36 Row Crop wheels complete with pans to fit MF135 or similar. 80% tread.

Good condition % Chris W 01787 247286 S5997 GOODYEAR 600/65 R28 DT 820 Tyres, treads appx 30%, Sound order Suit tractor front or sprayer Good condition % Shaun 07850 978188 S5831 STANDEN 11.2 R 48 rocrops C\w 40% tyres & Bolt in Ford 8 stud centres.

Also Set Of HDR Rims with 11.2 - 48Tyres & square Ford Pans Plus Terry Johnson dualling kit to mount 2 pairs of Rocrops on each axle. Good condition % Shaun 07850 978188 C6767 ROW CROP Set Wheels ex Case tractor, rear size 230/95R44 (9.5R44) Alliance tyres with 85% good tread, silver painted adjustable track Sam Moreton wheels with 8 stud 8” pcd fitting (will also fit MF, JD, DB, Leyland etc rear axles). Front 8.3/8R32 Kleber 40% tyres on yellow wheels with 8 stud 275mm pcd fitting Good condition £895 % Chris C 01926 338639 W3489 STANDEN HDR82 8.3x42 rowcrop wheels with 80% Kleiber 50 radials.

Very Good condition £295 % Chris W 01787 247286 C6809 ROWCROP WHEELS Set front & rear heavy duty type made by Sam Moretons tyres, rear size 9.5R44 Alliance on 8 stud fitting 205mm pcd with 140mm centre hole, front 8.3R32 Vredestein 8 stud 6” (150mm) pcd & 105mm centre hole, all tyres 90% good tread. Suit Lambourghini, SAME & other tractors Very Good condition £1,195 % Chris C 01926 338639

S7071 MITAS 380/85 R28 (14.9 - 28) tyres (tractor fronts) 2 Tyres almost as new, hardly used fitted by mistake. (No tubes) Excellent condition £500 the pair % Shaun 07850 978188 C6507 NARROW Tyres & wheels for row crop work, pair Kleber 9.5-44 tyres on rims to fit 8 stud 8” pcd fitting (ex MF but will fit Case/DB, JD etc.), good tyres but rims may require some repair. Vredestein 8.3-32 tyre with good sound tread. Pair complete wheel rims & centres (no tyres) to fit front axle of John Deere 4wd (2850 model etc) suit fitment of 9.5R32 or 8.3-32 tyres.

Good condition % Chris C 01926 338639 S6593 STOCKS 15 - 34 Dual wheel rims, pair of in Black. Tyres perished Good condition % Shaun 07850 978188 S6759 D AND S 12.4 R46 Rocrops To Suit MF 6150 (Adjustable track to 62”) Fitted Alliance A 350 tyres 4 star. 95% Centres have 6” hole 8” PSD Plus fronts 11.2 R 32, Alliance tyres 3 * Bolt in centres 220 hole 275 PCD Excellent condition £2,000 % Shaun 07850 978188 S6252 HEAVY DUTY 270 / 95 R48 Rocrop wheels c\w New tyres. Also inc HD Standen type rims & centres (8 stud 275 mm PCD & 220mm holes Good condition £975 % Shaun 07850 978188 S7082 TRELLEBORG Twin 423 Tyres 700/50 - 26.5 Vurtually as new, tyres only.

Very Good condition % Shaun 07850 978188 C6632 COMBINE Size set crossply tyres suit Claas/MF etc. Size 23.1/18-26 set of four all good tread but a little aged currently on 8 stud wheels ex wheeled excavator (rubber duck) but ideal as a spare or kit your machine out with a pair of better tyres.

8 ply tyres pair Dunlop & one each Goodyear & Powermark, 8” pcd fitting with 5.5” centrehole, offsets 7” & 14” centre to rim edge Good condition Offers % Chris C 01926 338639 C6863 TYRES & Dual Wheels Pair black painted (probably Stocks) dual wheels fitted 16.9R34 Michelin Bibagrip3 tyres, 6 ply with 25-30% good tread, rims can have centres bolted in, will require clamps for duals. Pair Goodyear radial tyres 16.9R38 suitable for duals. Pair rowcrop wheels ex front axle on Same tractor, Standen 8 stud, 6” (150mm)pcd & 110mm centre hole fitted 9.5R36 tyres all sound. Vredestein 700/4522.5 tyre 12 ply ex big baler or similar, vulcanised repaired & new tube, all good tread Good condition poa % Chris C 01926 338639 S6236 FOSSITT AND THORNE Heavy Duty Rocrop wheels, 1 pair of 8.3 - 44 s with 70 % Bibagrip tyres have 8 very strong 3 hole lugs 32” PCD. Also Pair of 9.5 - 48 Rocrops Also 8 stud 32” PCD. Plus Pair of Ford Pans 8” PCD big hole with 5.5” centre Good condition £250 pair % Shaun 07850 978188 S6925 TERRY JOHNSON 18.4 - 38 Duals c\w 60% Pirelli tyres & clamps. Spacers appx 10” Good condition £425 % Shaun 07850 978188 C5766 SET Rowcrop wheels for a JD 2850 4wd tractor with 12.4R32 fronts & 11.2R48 rears, Barum & Michelin tyres all tyres OK with between 10 & 20% tread, will fit other models Good condition £500 % Chris C 01926 338639

39

VEGETABLE EQUIPMENT

C6835 FEDELE Module Planter tractor linkage mounted 4 head/4 row unit, includes frame & operator protection canopy, individual FAST rotary heads with sprocket drive from rubber drive wheel provides infinite spacing options plus large diameter press wheels, tray carrier system adjacent to operator position seated 2 forward & 2 rear, 2009 model used on black fen soil Very Good condition £6,450 % Chris C 01926 338639 S5247 INVICTA Vibrating table on Long legs, Screen 750mm by 2m 20mm pitch rods. 960 watt motor. Tidy unit Took out ready to go Good condition % Shaun 07850 978188 W3434 NICHOLSON Fan Bladed Onion Toppers 2 x 10t/hr Onion Toppers that can be run in parallel or individually, complete with 1.5m wide rubber belt feed elevator. All motors 3 phase. Please call for details. poa % Chris W 01787 247286

40

VEHICLES/LGPV

S7079 2004 LANDROVER 90 County Pick up C\w Alloy wheels, sidesteps, Cloth seats. Only 54,000 Miles Very Good condition £7,500 % Shaun 07850 978188 C6866 IFOR WILLIAMS Pick-Up top to fit Nissan Navara double cab (crew cab) 2005 model pick-up, Ifor Williams code V419 NAV CC, all galvanised steel with mesh screen guard & mesh tail gate, little used new in 2005 but looks as new (dry stored).

Exact dimensions available on request Very Good condition £100 % Chris C 01926 338639 W3537 KAWASAKI 220 Farm use only, not road registered. Inquire for details. poa % Chris W 01787 247286 S7061 2006 MULTICAR Tremo Carrier S 4wd, 4ws Multipurpose vehicle with universal hydraulics inc front linkage, VW 1898cc diesel engine, Aircond cab with heated windscreen & mirrors, only 2331 hours.

Can be sold with Fielder FFA 400P Front mounted flail mower, 2m Snow plough and 1500 litre tank with weed sprayer / washer unit Very Good condition £40,000 % Shaun 07850 978188 C6745 CHERISED Number Plate transferable from Peugeot car, registration number K420 EWE suit any stockman with sheep.

Transfer fee payable by purchaser £235 % Chris C 01926 338639

Wrights Broker Service -

the safe and reliable way to buy and sell machinery and equipment

40 APRIL 2014

WWW.WRIGHTSREGISTER.COM

BEDEC ACRYLIC EXTERIOR

BARN PAINT THE SAFE ALTERNATIVE TO TAR VARNISH, BITUMEN AND CREOSOTE • • • •

EASY TO APPLY EXCELLENT COLOUR RETENTION MULTI-SURFACE APPLICATION FLEXIBLE - NO CRACKING OR FLAKING • LONG LASTING FINISH AVAILABLE NATIONWIDE THROUGH TRAVIS PERKINS, RIDGEONS, BREWER & SONS, BROMBOROUGH PAINTS, ERNEST DOE & DULUX DECORATOR CENTRES

TEL 01279 876 657 FAX: 01279 876 008 www.bedec.co.uk email: sales@bedec.co.uk