Custom trim 260 x 330 740 web coldset

740 740 800 840

CUSTOM TRIM 260mm x 330mm Trim COLDSET

PRINT SPECIFICATION Output resolution

1200 dpi

Total ink coverage

240%

Image resolution Maximum black Dot gain

150 ppi 95% 26%

www.mortonsprint.com

Contents

PDF size & templates .......................................................................... 3 Colour profiles & settings ................................................................. 5

Basic Photoshop image correction ................................................ 7 Automated picture correction ......................................................... 8 Creating print quality PDF files ....................................................... 9

Filename structures & sending files FTP .................................... 10

Type & rule guidance ......................................................................... 11

Useful contacts ...................................................................................... 12

PDF size & templates - 740 web trimmed

3

Single page PDF

270mm

270mm x 340mm PDF Size 260mm x 330mm Document size

240mm

340mm

310 mm

330 mm 260mm

Centre spread PDF

570mm x 350mm PDF Size 560mm x 340mm Document size

The centre spread can have text and images that run across the gutter. The red, grey and black areas are exactly as explained above.

The red area is the bleed area.

Bleed extends out 5mm from the edge of your finished document.

All images or colour that prints to t edge of your document should be extended into this area to avoid chance of any white lines appeari

The grey area is the non-print area. Any Text placed in this area will run very close to the edge of the document and could possibly get trimmed off.

The black area is the critical image area. Text or images including folios should not exist outside this area.

570 mm 550 mm

340 mm

310 mm

330 mm 560mm

4

Spread PDFs

PDF size & templates - 740 web trimmed

This is an examl

INCORRECT

This is an

If you have a spread over two pages other than a centre spread the pages must still be sent as single PDFs. In this instance images can go over the gutter. Please make sure that headline text is spaced either side of the exact centre to avoid any letters being split as this will not join up exactly when printed.

example!

example!

CORRECT

Please Note!

289 mm

370mm

The PDF size should not be confused with the finished newspaper size found on your quote form.

Templates for Quark & Indesign are available to download from the Mortons Print website www.mortonsprint.co.uk

Colour profiles & settings

5

It’s important to note that it’s almost impossible to replicate exactly in print the colours that you see on a computer screen. They’re two entirely different media – screens display colours according to transmitted light in the RGB range, while paper displays colours according to the absorption and reflection of CMYK.

However using the correct colour profiles for printing can help to achieve the best possible reproduction of colour. The correct colour profile must be installed when converting images from RGB to CMYK

RGB

What is the RGB conversion to CMYK all about?

RGB stands for Red, Green and Blue; and RGB is the ‘colour space’ used by computer monitors, digital cameras and scanners.

CMYK stands for Cyan, Magenta, Yellow and Black.

Almost all conventional and digital printing presses use CMYK .

The problem is that RGB and CMYK have different colour gamuts. A colour gamut is the range of colours that a colour space can reproduce. RGB has a wider colour gamut than CMYK. That is, RGB is capable of reproducing more colours than CMYK. RGB tends to be able to reproduce colours at the extremes of red, green and blue that CMYK is incapable of reproducing. In other words, bright reds, greens and blues will not be quite so bright when converted to CMYK.

Using the correct colour profile when converting to CMYK will do two things that will help ensure the best reproduction. Firstly it will simulate as near as possible how these colours will look when printed on a newspaper press. Secondly it will apply the correct amount of ink coverage that can be printed on typical newspaper stocks.

CMYK

To use the correct profiles you must first either download the following files from our website or contact one of the Pre-press team who will be able to email them to you.

ISOnewspaper26v4.icc

ISOnewspaper26v4_gr

ISOnewspaper26v4.csf

ICC colour profile

ICC colour profile

Adobe Colour Settings

The above colour profiles and settings will need placing in locations within your computer’s hard drive. Once in place you will be able to select them in Photoshop.

See page 6 to find out where to place the settings and how to use them. Alternatively you can contact the Pre-press dept who will be able to talk you through what to do.

Profiles and settings are available to download from the Mortons Print website www.mortonsprint.co.uk

6

Colour profile destinations.

Colour profiles & settings

PC users: Windows XP/Vista csf file should go in

c:\Program Files\Common Files\Adobe\Color\Settings\Recommended

icc profiles should go in

c:\Program Files(x86)\Common Files\Adobe\Color\Profiles\Recommended

PC users: Windows 7 csf file should go in

c:\Program Files(x86)\Common Files\Adobe\Color\Settings\Recommended

icc profiles should go in

c:\Program Files(x86)\Common Files\Adobe\Color\Profiles\Recommended

Mac users:

csf file should go in

mac hd\library\application support\adobe\color\settings\recommended icc profiles should go in

mac hd\library\colorsync\profiles\recommended

Selecting your new colour settings in Photoshop.

Select colour settings from the edit drop down menu.

Select MORTONS ISO 26 then press done

Your photoshop is now setup.

Any conversion from RGB to CMYK will now embed the correct values and display as close as possible how it will print. If you have any images that are already in CMYK format you will have to re open them in Photoshop. When opening you will get a warning about an embedded profile mismatch. Select convert documents colours to the working space as seen in the image to the right hand side. If you get the same warning when opening RGB images then select using the embedded profile.

Basic Photoshop image correction

7

Having the correct profiles and settings will make a big difference in how images will reproduce but image correction will still need to be applied to improve things further. This should mostly take place after converting to CMYK. Photoshop curve tool

Whilst it may appear complex the curve tool is actually easy to use, it’s more powerful and flexible than any of the other adjustment tools.

The curve tool can be found by going to the image drop down menu then selecting curves from the adjustments sub menu.

1 1) Clicking on the diagonal line creates a point. When moving this point downwards the image becomes lighter.

2

2) When moving this point upwards the image becomes darker.

3

3) By creating the point in the top right hand corner and then sliding the point to the left will increase the shadow area.

4

4) By creating the point in the bottom left hand corner and then sliding the point to the right will increase the highlight.

5

5) By creating two points and then creating a mild S shaped curve you can enhance overall contrast.

8

Correcting images to a consistent high standard can be difficult as well as time consuming. Here at Mortons we can provide you with automated picture correction with two methods available.

Image upload method

Simply upload your original uncorrected images to a dedicated input folder on our FTP server.

Our system will quickly perform the necessary correction and place in an output folder ready for you to download and place within your desktop publishing software. Images uploaded need to be in RGB colour space saved in JPG format with maximum quality compression. If possible it’s recommended that the images are sized as they are to appear in the publication before uploading. Adverts or logos containing corporate colours should not be uploaded to avoid correction that could result in colours changing.

Correction within PDF

Automated picture correction logos containing corporate colours should be placed in CMYK to avoid correction that could result in colour changing. Placing text that has transparencies effects applied to it should not be placed over the top of images as this can affect the correction. If you wish to use that type of effect the picture will need to be placed in CMYK for that instance.

Which method should I use?

The image upload method gives you the option to call up and check your images before going to print. Sometimes pictures that contain strange lighting effects such as dark indoor images with coloured lighting can cause unusual results. Also you may want to adjust the correction further after our system has processed the image. The correction within PDF method can speed up your workflow greatly as you will not need to upload your images separately as all correction takes place after you upload the final print ready PDFs. This means you will not get to see the images unless you request PDF proofs back. Also extra correction will not be possible.

Place uncorrected RGB images in your desktop publishing software. Using a PDF setting supplied

by Mortons generate a pdf made up of both RGB and CMYK elements. Our system identifies RGB images within the PDF and colour corrects them before converting to CMYK. Anything that does not need to be corrected such as adverts or

If you would like any further information or have any questions regarding these services you can contact Jimmy Rossington directly 01507 529295 jrossington@mortons.co.uk

Before automated correction

After automated correction

Creating print quality PDF files

It’s important when exporting your pages to PDF that the correct settings are used. This will ensure everything prints exactly as it should without any unexpected results or quality issues. PDF files should be version 1.3, font embedded with no crop marks, registration marks or printer marks.

Each page must be sent as a separate PDF file with the exception of the centre spread.

Exporting to PDF from Indesign

If you haven’t already received the PDF Preset file MORTONS COLDSET PDF.joboptions you can either contact a member of the Pre-press team or download it from www.mortonsprint.co.uk.

Save the file on your Applemac or PC in a location you can easily find.

Exporting to PDF from Quark Xpress

9

If you haven’t already received the PDF Output file MORTONS COLDSET PDF.xml you can either contact a member of the Pre-press team or download it from www.mortonsprint.co.uk. Save the file on your Applemac or PC in a location you can easily find.

From the edit drop down menu select Output Styles.

When the Output Styles window appears click on the import button in the bottom left hand corner.

Locate the MORTONS COLDSET PDF.xml file then click open.

From the file drop down menu select Adobe PDF Preset followed by define in the sub menu.

You wil now be back in the Output Styles window where you click save.

Locate the MORTONS COLDSET PDF.joboption file then click open.

When the Export as PDF window appears type the filename of the page you wish to export next to filename. Type the page number of the page you wish to PDF next to Pages then select MORTONS COLDSET PDF next to the PDF Style at the bottom.

Finally click the save button to complete the process.

When the Adobe PDF Preset window appears click Load.

You will now be back in the Adobe PDF Preset window where you click done.

To create a pdf with the new settings select Adobe PDF Preset from the file drop down menu followed by MORTONS COLDSET PDF in the sub menu.

When the export window appears type in the filename of the page you wish to export in to the filename field and then click save.

When the Export Adobe PDF window appears select the range under pages towards the middle of the window. Type the number of the page you wish to PDF then click export.

When exporting a centre spread also select spread underneath range then type the two page numbers separated with a hyphen. So for example if the centre pages are pages 24 and 25 they should be typed 24-25. Click the export to complete the process.

To create a PDF with the new settings select export followed by Layout as PDF from the sub menu.

When exporting a centre spread click the options button at the bottom of the Export as PDF window. Click the spreads box, click done before proceeding with the process.

Exporting to PDF from other software

If you are creating PDF files from other software packages print quality settings should be selected as well as taking in to account our requirements as mentioned at the start of this page.

Problems Exporting to PDF

If you experience any problems producing PDF files or need any help with the above please don’t hesitate to get in touch with the Pre Press Dept who will be able to help resolve any problems.

10

How should I name my files?

When you come to send your artwork to us you will not only need to save each page separately but with a specific filename structure that is unique to each publication. The filename structure will ensure that the pages are imposed in the correct order

Job Code Page Number

Filename structures

as well as contain information relevant to that specific issue that might help prevent errors from occurring. If you haven’t already received your unique filename structure please contact the Pre-press Dept before transmitting any pages. Please see below an example of a typical Mortons filename structure.

Publication Date

Issue Number

ABC001_31072012_ISSUE001 Resupplied pages must be named with new included at the end of the filename structure!

FTP (File Transfer Protocol)

We strongly recommended that all pdfs are sent directly to our FTP server. Using email or web applications to send are not as reliable and sometimes cause problems.

FTP is a standard network protocol used to transfer files from one host to another over a TCP–based network such as the Internet.

If you haven’t already received an FTP username and password please contact a member of the Prepress Dept and they will be able to create you an account.

5 Free FTP Client Software

FTP software is usually free and very simple to use.

Please see below.

Sending files FTP

3) Cyberduck - Windows & Mac www.cyberduck.ch

4) WinSCP - Windows www.winscp.net/eng

5) CoffeeCup Free FTP - Windows www.coffeecup.com/free-ftp

Once you have FTP software setup and have our host address along with your username and password you will be able to transmit your pages to us. If you experience any problems connecting or need any help setting up your FTP software don’t hesitate to get in touch with the Pre-press Dept who will be able to provide you with any assistance you may need.

1) FileZilla - Windows, Mac & Linux www.filezilla-project.org

2) FireFTP - Windows, Mac & Linux (Works within Firefox web browser) www.fireftp.mozdev.org

Pages must not be uploaded to the COLLECTED BY MORTONS folder found in your ftp account!

Type & rule guidance

Coloured type

Fine Serif

Serif

Sans Serif

Below are the ideal minimum point sizes for when producing type out of more than one of the four process colours:

2,3 and 4 coloured type

12pt 12pt 14pt

Design guidance

10pt text 10pt text Rules

Type should not be reversed on a yellow background Type should not be reversed on light coloured backgrounds C 10% Y 10%

Below are the ideal minimum point sizes for when producing rules out of more than one colour.

Point size

1 coloured background

10pt

2,3 and 4 coloured background 12pt Examples

Arial 10pt text

Arial 12pt text

Arial 12pt text

1 coloured background M 100%

2 coloured background M 100% Y 100%

4 coloured background C 100% M 30% Y 100% K 15%

Rules

Reversed & coloured type on coloured backgrounds

Below are the ideal minimum point sizes for when producing type out of more than one of the four process colours:

11

1 col

.5pt

3 and 4 col

4pt

2 col

Registration issues

3pt

It’s very difficult to get four separately printed colours to line up exactly on a newspaper press.

The smaller the text or rule the harder it is to print clearly without any ghosting appearing so please take in to account the information given on this page. See the example below of how things can sometimes appear when the information on this page is not taken in to account.

12

Useful Contacts

Pre-Press

Accounts

James Rossington Systems Improvement Technician & Pre-Press Supervisor 01507 529321 jrossington@mortons.co.uk

Accounts & Systems Manager 01507 529263 nkelsey@mortons.co.uk

For all file handling queries and full technical support.

General Pre-Press 01507 529293 01507 529297 01507 529298 printprepress@mortons.co.uk

Planning

For all queries regarding Quantities, Transport, Inserts & Press schedules.

Neal Burn Production Planner 01507 529271 nburn@mortons.co.uk

Joe Rossington Production Planner 01507 529262 jwrossington@mortons.co.uk

For all payment and billing queries.

Nicola Kelsey

Katie Dudley

Accounts Assistant 01507 529213 printaccounts@mortons.co.uk

Sales

For all queries regarding quotes, bookings and contracts.

Ken Calderwood Commercial Manager 01507 529324 kcalderwood@mortons.co.uk

Robert Savage Contract Print Client Manager 01507 529255 rsavage@mortons.co.uk

www.mortonsprint.com