TRANEMO ADVANCED WORKWEAR
EXPERTS IN FLAME RETARDANT WORKWEAR
STANDARDS AND SYMBOLS
Choosing the right protective clothing starts with understanding standards and certifications. In the overview on this page we list the most common standards and requirements for protection against flame and heat, electric arc, chemicals, weather conditions, and more. All Tranemo protective clothing follows the Regulation (EU)2016/425 and the latest European (EN) standards. For more information, certificates and Declaration of Conformity please visit our website.
The catalogue specifies the standards for which the products are certified. When the standard is marked with * or 1 , we refer to the complete information for each product on our website.
TRANEMO SKINSAFE ™
THE MULTI-LAYER PROTECTION SYSTEM
Tranemo Skinsafe™ is a multi-layer system designed to protect against flame, heat and electric arc hazards.
All Tranemo Skinsafe™ systems are tested, at a testing institute, according to EN 614822, APC, ELIM and EBT/ATPV. The tests are performed both on fabrics and garments. The symbol is shown on garments that can be combined as a Skinsafe system.
STANDARD 100 BY OEKO-TEX ® PRODUCTS TESTED FOR HARMFUL SUBSTANCES
Oeko-Tex® is an independent third-party certification process that ensures control of harmful and hazardous chemicals.
Nearly all fabric and accessories that Tranemo use are tested and certified under OEKO-TEX Standard 100, product class 2. Tranemo have two current certificates.
CE MARKING FOR PROTECTIVE CLOTHING
The CE marking indicates that a Notified Body has EU type examined the garment according to the PPE Regulation (EU)2016/425.
All Tranemo protective clothing is CE marked. Inside each garment there is a CE label showing the standards and classes for which the garment is approved.
EN
ISO 11612
PROTECTIVE CLOTHING TO PROTECT AGAINST HEAT AND FLAME
The standard specifies protective clothing when working where there is a risk that the garments will come into contact with heat and flame. It is the base level of protection for all Tranemo flame retardant clothing. The garments are marked based on the performance categories: A - ignition, B - convective heat, C - radiant heat, D - molten aluminium, E - molten iron, F - contact heat.
EN 61482-2
PROTECTIVE CLOTHING TO PROTECT AGAINST THE THERMAL HAZARD OF AN ELECTRIC ARC
The standard specifies protective clothing used where there is a risk of an electric arc. Tranemo garments are marked with APC, ELIM and ATPV/EBT. ELIM (Incident Energy Limit, cal/cm²) is the European official arc rating for electric arc showing how much energy the protective clothing can withstand without any risk of a second degree burn.
EN 1149-5
PROTECTIVE CLOTHING WITH ELECTROSTATIC PROPERTIES
The standard specifies protective clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks, which in turn could ignite explosive substances.
Anti-static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2 (gas, mist and vapour) and 20, 21 and 22 (dust).
EN ISO 11611
PROTECTIVE CLOTHING FOR USE IN WELDING AND ALLIED PROCESSES
The standard specifies protective clothing used in welding work or allied processes where you have the risk of spatter, radiant heat from the arc, short contact with flame and live electrical conductors. The standard is divided into class 1 (lower risk) and class 2 (higher risk), depending on welding processes and environmental conditions.
EN 13034 TYPE PB [6]
PROTECTIVE CLOTHING TO PROTECT AGAINST LIQUID CHEMICALS
This standard specifies protective clothing used where there is a risk of a potential exposure to a light spray, liquid aerosols or low pressure/volume splashes when a complete liquid permeation barrier is not required.
In accordance to the standard the following chemical groups can be tested: acid, alcaline, aromatic hydrocarbon and alcohol.
EN ISO 14116
PROTECTIVE CLOTHING AGAINST FLAME, LIMITED FLAME SPREAD
The standard is used for protective clothing that offers limited protection against brief or accidental contact with small flames, such as vests, t-shirts and socks. The standard has no dedicated symbol but Tranemo uses a flame symbol. The standard is divided into three classes, where index 3 is the highest protection.
EN ISO 20471
PROTECTIVE CLOTHING WITH HIGH VISIBILITY
This standard specifies protective clothing used in high risk environments where the wearer needs to be visible at both day and night.
The standard is divided into three classes where class 3 has the highest visibility. Class 1 and 2 clothing can be combined with other Tranemo high visibility garments as a set to reach a combined class 3 system.
EN 17353
PROTECTIVE CLOTHING WITH ENHANCED VISIBILITY
The standard defines requirements for protective clothing designed to enhance the visibility of individuals in medium-risk environments. The standard includes three types depending on predictable conditions of use.
RIS-3279-TOM
RAILWAY GROUP HIGH-VISIBILITY STANDARD FOR UK
The standard is a supplement to the high visibility standard EN ISO 20471 and applies to work on or near British railways. To certify protective garments according to RIS-3279-TOM, the garment must achieve at least EN ISO 20471 class 2 and be fluorescent orange, but with stricter colour requirements.
EN 342
PROTECTIVE CLOTHING TO PROTECT AGAINST COLD
The standard specifies protective clothing used when working in cold environments. Properties that are tested are: thermal insulation, air permeability, water vapour resistance and water penetration resistance. The tested garment is assessed as a 3-layer system together with underwear.
EN 343
PROTECTIVE CLOTHING TO PROTECT AGAINST RAIN
This standard specifies protective clothing used for working in rain or snow, fog and ground humidity. Garment and seams are tested for water penetration resistance and water vapour resistance where class 4 is the highest protection level.
EN 13758-2
PROTECTIVE CLOTHING TO PROTECT AGAINST UV RADIATION
This standard specifies protective clothing that protects against UV radiation. All textiles offer some protection against UV radiation. EN 13758-2 indicates that the UPF rating (Ultraviolet Protection Factor) is 40 or more. and that the garment protects against both UVA and UVB radiation.
EN ISO 15797
P ROCEDURES FOR INDUSTRY LAUNDRY AND FINISHING OF WORKWEAR
EN ISO 15797 is a wash test method for fabrics used in protective clothing that will be industrially washed. Specific requirements are determined in each EN standard.
The PRO symbol states the number of washes performed in laboratory environment before the flame protection, high visibility and anti-static properties are tested.
Standards Tranemo Skinsafe™ Fabric information
TERA TX
TERA TX is our largest flame retardant range developed in collaboration with the electricity and power industries and companies that require completely metal free garments. The non-metal and anti-static protective clothing provides the user with the highest levels of functionality, superior comfort and garments with a long life-span.
6054
FLAME RETARDANT
6023
6024 81 FLAME RETARDANT STRETCH TROUSERS
FLAME RETARDANT
TERA TX ARC 2
FLAME RETARDANT
6080 81 FLAME RETARDANT 2-LAYER TROUSERS
5895 81 FLAME RETARDANT 2-LAYER BIB ’N’ BRACE
30”- 50”R, 32”- 40”T, 34”- 48”S
811, 911, 804
5861
5886 81 FLAME RETARDANT 2-LAYER BIB ’N’
Size: 30”- 50”R, 32”- 40”T, 34”- 48”S Colour: 94 yellow/navy Quality: 811, 911
6086 81 FLAME RETARDANT 2-LAYER BIB ’N’
40”T, 34”- 48”S
arc, EN 61482-2 APC 2. PFAS-free¹.
30”- 50”R, 32”- 40”T, 34”- 48”S
03 navy
811, 911
6079
Size: Ladies 8-20, 8T-20T
811, 911
5896 81 FLAME RETARDANT 2-LAYER LADIES
TROUSERS
6089 81 FLAME
SWITCH
SWITCH increases safety for those who work in electrical systems with high energy levels - for example when breaking the power in switchgear or larger battery units. With SWITCH, Tranemo has a comprehensive system for electric arc protection and the range is developed to provide the body with extremely high protection against an electric arc. With EN 61482-2 APC 2, ELIM 45 cal/cm² and EBT 49 cal/cm², SWITCH achieves the highest protection category against electric arc accidents (PPE 4 NFPA 70E).
FLAME RETARDANT
ZENITH
ZENITH is designed to keep you highly visible in environments where risks may come from high voltage or metalworking. Its HV orange color is certified to EN ISO 20471 and is widely preferred for its exceptional visibility, even in snowy conditions.
34”- 48”S Colour: 81 orange/anthracite Quality: 821, 811, 802 5221
5224
EDGE
EDGE is designed to make you highly visible on the railways, in areas where there are requirements for garments to offer protection for FR and ARC hazards.
5257
OFFICE FR
OFFICE FR is a long awaited range for workers who need to move between office environments and areas where there is an FR/ARC risk. With Tranemo’s OFFICE FR range, you can be well-dressed in the conference room while staying protected and mobile in high-risk environments.
5225 84 FLAME RETARDANT HI-VIS LADIES TROUSERS
FLAME RETARDANT
CANTEX WS
5040 88 FLAME RETARDANT BIB ’N’ BRACE
Inherent flame retardant high visibility bib ’n’ brace with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the bib ’n’ brace with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. PFAS-free.
Size: 30”- 50”R, 32”- 40”T, 34”- 48”S
5740 88 FLAME RETARDANT BIB ’N’
Weld at the front gives you extra high protection against welding and grinding splashes. PFAS-free.
Size: 30”- 50”R, 32”- 40”T, 34”- 48”S Colour: 94 yellow/navy Quality: 885, 884
5420 88 FLAME RETARDANT TROUSERS Inherent
5452 88 FLAME RETARDANT CRAFTSMAN TROUSERS Inherent
885, 884
RETARDANT LADIES JACKET Inherent
jacket in Cantex
FLAME RETARDANT
5097
Inherent
Inherent
94
Quality: 885, 884, 802
6729 88 FLAME RETARDANT LADIES TROUSERS
Inherent flame retardant ladies trousers with front in Cantex Weld and back in Cantex Stretch. PFAS-free. Size: Ladies 6-20, 8T-20T Colour:
5459
5176
5175
5181
RETARDANT LADIES 2-LAYER TROUSERS
Inherent
8T-20T
Colour: 94 yellow/navy Quality: 885, 884, 911
5174 88 FLAME RETARDANT 2-LAYER BIB ’N’ BRACE
Inherent
5183 88 FLAME RETARDANT LADIES 2-LAYER JACKET
FLAME RETARDANT
MAGMA
5625 87 FLAME RETARDANT TROUSERS
Inherent
5655
other molten metals. PFAS-free. Size: 30”- 50”R, 32”- 40”T, 30”- 48”S
94 yellow/navy Quality: 873, 874
5626 87 FLAME RETARDANT TROUSERS, SHOE PROTECTION
Inherent flame retardant trousers with shoe protection in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals.
Size: 30”- 50”R, 32”- 40”T, 30”- 48”S
Colour: 94 yellow/navy Quality: 873, 874, 802
5656 87 FLAME RETARDANT CRAFTSMAN TROUSERS, SHOE PROTECTION
Inherent flame retardant trousers with shoe protection in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. Size: 30”- 50”R, 32”- 40”T, 30”- 48”S Colour: 94 yellow/navy Quality: 873, 874, 802
OUTBACK HW
5552 86 WELDING CRAFTSMAN TROUSERS
Welding
5541 86 WELDING BIB ’N’ BRACE
Welding bib ’n’ braces for heavy welding with a soft fabric with extremely good welding properties. The bib ’n’ braces have a long lifetime and very high protection against radiant heat and metal splashes. PFAS-free.
Size: 30”- 50”R, 32”- 40”T, 34”- 48”S Colour: 67 anthracite
5510 86 WELDING BOILERSUIT
Welding
Size: XS-4XL Colour: 67 anthracite
APEX
APEX provides protection in work situations where chemical splashes are a concern, allowing you to stay safe without needing a full chemical suit. The material in the garments is a 300 g/m² dope-dyed Aramid, which not only passes the tests for acid and alkali according to EN13034, but also for aromatic hydrocarbons and alcohol.
CO ATS
T-SHIRTS & POLO SHIRTS
XXL(95C-D), 4XL(105C-D) Colour: 03 navy Quality: 924
5993 92 FLAME RETARDANT THONG
Non-metal and inherent flame retardant thong in a soft tricot, where 50% of the cotton is recycled.
OUTERWEAR FR
Many jobs that require flame retardant or electric arc protection are often performed outdoors in varying weather conditions, placing high demands on the clothing. Garments must protect not only against the elements but also flame related risks, while remaining comfortable and flexible.
5101
PFAS-free¹,
5136
Non-metal,
5201
84 FLAME RETARDANT TROUSERS, WINDBREAKER
Non-metal and
Size: 30”-
5253
84 FLAME RETARDANT TROUSERS, WINDBREAKER
Non-metal and inherent flame retardant
PFAS-free¹.
Size: 30”- 50”R, 32”- 40”T, 30”- 48”S Colour: 93 orange/navy Quality: 846, 811, 898, 804 Range: Zenith
5822 81 FLAME RETARDANT TROUSERS, WINDBREAKER
Non-metal
5122
5852 81 FLAME RETARDANT CRAFTSMAN TROUSERS, WINDBREAKER
HEAD PROTECTION
9151 82 FLAME
PROTECTIVE GLOVES
RG00 01 FLAME RETARDANT GLOVES CONTACT
Flame retardant, comfortable glove with good thermal insulation (13-3HNFR)
Size: 7/XS-11/XL Colour: 00 multi-colour
RG00
Size: 9/M-11/XL Colour: 00 multi-colour
RG00 05 FLAME RETARDANT GLOVES ARC 40
Flame retardant glove with very high electric arc protection. (Eureka 13-4 HAF50)
Size: 8/S-12/XXL Colour: 00 multi-colour
RG00 08 FLAME RETARDANT WATERPROOF GLOVES ARC 12 Waterproof
retardant winter gloves with high electric arc protection and good cut resistance. (Eureka 1510-4HAF-12-WP)
Size: 8/S-12/XXL Colour: 00 multi-colour
SOCKS & CALF SUPPORT
9054 00 FLAME RETARDANT SOCK
Inherent flame retardant work sock, 400 g/m². PFASfree. 50% of
9074
ACCESSORIES
Practical accessories for Tranemo’s flame retardant clothing. Choose from flame retardant kneepads, armlets, ID card pockets etc.
HI-VIS & STANDARD WORKWEAR
For
4324
4339
VISION HVOUTERWEAR
4307
COMFORT STRETCH
STRETCH TROUSERS
Advanced stretch trousers with many tool pockets for craftsmen who require high functionality. The trousers have outside kneepad pockets in HTPA Dobby and 4-way stretch zones for perfect fit, high comfort and mobility. PFAS-free¹.
Size: 30”- 50”R, 32”- 40”T, 28”- 48”S
Colour: 07 black Quality: 400, 310, 213
1152 40 ADVANCED CRAFTSMAN STRETCH TROUSERS
Advanced craftsman stretch trousers with reinforced nail pockets and many tool pockets for craftsmen who require high functionality. The trousers have outside kneepad pockets in HTPA Dobby and 4-way stretch zones for perfect fit, high comfort and mobility. PFAS-free¹.
Size: 30”- 50”R, 32”- 40”T, 28”-
1160
COMFORT LIGHT
A classic collection in strong 245 g/m² polyester/cotton that makes this range extremely tough and durable, yet very comfortable to wear. This range is ideally suited for the service and industrial markets.
CRAFTSMAN PRO
The Craftsman Pro range is made from 100% cotton, designed for professionals in craft and workshop environments. This durable collection combines functionality and comfort, allowing the wearer to move freely throughout the day.
BASE LAYER
The underwear ranges suit workers in colder climates, both indoors or outdoors. If extra protection against the cold is required, we recommend our thermo garments as an extra insulating layer.
OUTERWEAR
Tranemo has many different types of outer garments enabling the user to wear garments according to the layer-onlayer principle for the best and most lightweight protection. The winter range offers a comprehensive selection of garments for all climates that can be used both outdoors and also in cold indoor environments.
ACCESSORIES
SIZE GUIDE
Our size guide will help you find the right size for your Tranemo garment. . Since men and ladies have different body shapes, it is important to use the appropriate measurement guide when choosing your size. Measure yourself over your underwear, the garments are designed with built-in room for movement.
LADIES
The Swedish ladies size 34-48 were previously UK size 8-22. Based on customer feedback that UK sizes were running small, the size range was adjusted in 2024 to sizes 6–20. For repeat orders or if you wish to match a previously ordered size exactly, please refer to the Swedish sizing 34–48. Please note that during the transition period, paper labels will display the updated sizes, while some sewn-in labels may still show the old sizing.
Use your hip measurement as the main guide when selecting your size.
C-size (Regular waist and regular leg length)
C-size (Regular waist and longer leg length)
Use your hip measurement as the main guide when selecting your size.
Waist
GENTS
Choose your trouser size primarily based on waist and inside leg measurements.
C-size (Regular waist and regular leg length)
SHOULDER+SLEEVE
C-size (Regular waist and longer leg length)
D-size (Larger waist and shorter leg length)
Primarily use chest measurements to choose the right size.
HEATSEAL BADGES
When ordering a heatseal badge, the cost is made up of two charges. The first charge is for making the heatseal badge and the second charge for applying the heatseal badge to the garment. The heatseal badges are charged on the first order and the price varies depending on the size of the badge, how many colours are being used, and the quantity being ordered. Minimum order quantity for 1-3 colours is 25 pcs and then in multiples of 25. Minimum order quantity for more than 3 colours is 100 pieces. Tranemo has 13 standard colours to choose from.
InduTrans - This is an all-round heatseal badge that works on most materials. Covers dark garments to 99% and can be washed in 60 degrees and tumble dried in low temperatures (garment washed and dried inside out). InduTrans is tested and complies to the requirements for EN ISO 14116 and 1149-5 when applied to most Tranemo Flame Retardant fabrics.
Artwork - originating cost - To ensure the best quality, please supply us with a digital eps file, with text outlines. If the original is not in an acceptable file format, there will be a cost for re-designing.
Applying instructions - InduTrans heatseal badges should be applied by a heatseal machine for 10-15 seconds at 160°C. The surface of the material should be flat and without seams. For Flame Retardant garments, the best placement is where there are several layers of fabric underneath - this will help protect the wearer against extra heat that a heatseal badge may retain during use. Water resistant garments can be preheated to get a better finish.
Location of heatseal badges, max 100 cm².
Depending on the shape of the heatseal badge and the design of a garment, it may be that it is not possible or suitable to apply the heatseal badge to some areas of the garment.
Location of heatseal badges, max 500 cm².
Depending on the shape of the heatseal badge and the design of a garment, it may be that it is not possible or suitable to apply the heatseal badge to some areas of the garment.
Dark grey Black
Light grey White Yellow
Dark red Green
Dark green
Light blue
Royal blue Navy Red Orange
Standard colour:
