Find a large selection golf ferrules at MONARK GOLF SUPPLY

FIND A LARGE SELECTION GOLF FERRULES MONARK GOLF SUPPLY

FERRULES 1/8" BLACK, PACK OF 10 • Fits standard parallel tipped shafts • For woods with 0.335" hosel diameter.

• For irons and hybrids with 0.370" hosel diameter.

• Ferrules feature a 19 degree countersink allowing a cushion of epoxy to form between the top of the hosel and inside of the ferrule.

• The ferrules are prewashed with a high gloss finish, no need for an acetone wipe to make it shine!

• 1/4 inch long • Pack of 10

FERRULES BLACK 3/4", PACK OF 10 • Fits standard parallel tipped shafts • For woods with 0.335" hosel diameter.

• For irons and hybrids with 0.370" hosel diameter.

• Ferrules feature a 19 degree countersink allowing a cushion of epoxy to form between the top of the hosel and inside of the ferrule.

• The ferrules are prewashed with a high gloss finish, no need for an acetone wipe to make it shine!

• 3/4 inch long • Pack of 10

0.350" WOOD FERRULE, PACK OF 12 • 1/2" tall.

• Non-collared ferrule for 0.350" wood shafts.

• 0.545" O.D. • Sold in pack of 12 ferrules.

FERRULE MEASURING & INSTALLATION TOOL • The Ferrule Block is a handy tool to install ferrules and to identifying shaft tip diameters.

• The top of The Ferrule Block features a counter-bored recess for the ferrule to sit without slipping and will accept all standard sized ferrules from 0.335" to oversized 0.370" iron ferrules.

• Once you have started the ferrule onto your shaft, simply push down until the shaft is seated into The Ferrule Block. Now the ferrule is installed safely enough onto the shaft that you can use the head to drive it on the rest of the way.

• The Ferrule Block is also a handy measurement tool to help identify the most common sized tip and butt diameters used in the industry today. Measure butts and tips quickly and accuracy.

CONTACT US • Phone – (877) 551 – 4653 • Email Id - info@monarkgolf.com • Address – P.O.Box 1263,Walnut,CA 91788-1263,U.S.A. • Website – https://www.monarkgolf.com/