1/4
SS 408
eduard
Mi-35M interior S.A. 1/72 scale detail set for ZVEZDA •sada detailù pro model 1/72 ZVEZDA
SS408
APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUŽÍT EXPRESS MASK NABARVIT PØED SLEPENÍM
film
SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ REMOVE ODSTRANIT
BEND OHNOUT
GRIND OBROUSIT
?
REPLACE NAHRADIT
DRILL HOLE VRTAT OTVOR
ORIGINAL KIT PARTS PÙVODNÍ DÍLY STAVEBNICE
PARTS TO BE REMOVED DÍLY K ODSTRANÌNÍ
PHOTO-ETCHED PARTS LEPTANÉ DÍLY
OPTION VOLBA
FILL TMELIT
21 C7
A46
22
27 13 12
33
A26
26
18
47
31
35
A47 19 20
23 7
35
19
A46
6
23
8 5
5
8
2/4
SS 408
16 14
C3 45
4
decal 5
10
43 E1 instrument panel 24
49
B29
15
41 A47 (rear seat)
44
C28
17
decal 2
C29 3 film
2
25
decal 3
50 9
C25 11 C30
32
instrument panel
34
3/4
SS 408
1
C25
decal 4
38
B26
36
E2
E1, E2 39 46 E6
A46 (front seat)
30
30
29
29 29 40 28
66 F63
37
30 52
29 A45 42
40 D3
30 ball pen 37
D1
42 48
4/4
SS 408
PARTS WITH GLUE
DÍLY OPATØENÉ LEPIDLEM
3. Do not touch the adhesive areas of the etched components. 1. Separate the etched components from their frames on the 3. Nesahejte na èásti dílù, na kterých je naneseno lepidlo. protective paper. Removal from the paper is done only after separation of the parts from the frames.
1.Samolepící díly oddìlujte od rámeèku na podkladovém papíøe. Po oddìlení je sejmìte z krycího papíru.
4. Hold the parts by the edges, or at areas free of adhesive.
4. Samolepící díly berte za hrany nebo za èásti, na kterých není nanesené lepidlo.
5. Lightly place the component in the desired location and position. Adjust as required. The component will by permanently affixed when pressed onto its intended location, its location can be adjusted.
2. Do not inadvertently place etched componets on an 5. Díl lehce položte do pozice, ve které má být nalepen. unwanted surface. Attempts to remove will result in Upravte pøesnou pozici a pøimáèknìte. Díl dokonale pøilne damage to your part. až po pøimáèknutí, pøed pøimáèknutím lze dílem opatrnì 2. Nepokládejte samolepící díly na volné plochy. Pokud je omylem pøilepíte, pøi pokusu o odlepení dojde k poškození dílu.
© EDUARD M.A. 2012
manipulovat.
www.eduard.com
Made in Czech Republic